TOTO Europe GmbH Approvals


WRAS Approval Number: 1812333

Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). Flow is controlled via a solenoid valve (housed within the tap) activated via an infra-red sensor, the inlet to the tap incorporates stainless steel strainers and single approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Within the tap are flow regulators The temperature is controlled independently via a thermostatic cartridge and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1812333
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined hose assembly incorporating ⅜” captive nut end connections.
  • Marking: Toto on body
  • Installation Requirements R001 R006 R009
  • Model
    TEXN20ALV300R
  • Factor: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911336

Wall mounted spout outlet having a chorme plated brass body with infrared sensor. No flow control option is supplied with this product, Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1911336
  • Expiry date: 30/11/2024
  • Size: 11mm tube inlet
  • Marking: Toto on spout
  • Installation Requirements R001 R040
  • Model
    DLE105ANE4
  • Manufacturer: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912338

Thermostatic mixing valve with brass body. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1912338
  • Expiry date: 31/12/2024
  • Size: ⅜” BSP (M)
  • Marking: TOTO on body.
  • Installation Requirements R001 R010 R040
  • Model
    DLE424SMAE
  • Manufacturer: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911337

Range of deck mounted single hole, single outlet (fixed) single feed electronically controlled tap assemblies (chromium plated brass). Flow is controlled via a solenoid valve (housed within a control unit) activated via an infra-red sensor. The inlet to the control unit incorporates a plastic flow regulator. The spout outlet incorporates a plastic or metal aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0684 Combination Tap Assemblies
  • Section Subtitle: Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
  • WRAS Approval Number: 1911337
  • Expiry date: 30/11/2024
  • Size: ⅜” BSP (M) (to control unit)
  • Marking: TOTO on spout and cover of control unit
  • Installation Requirements R001 R006 R007
  • Model
    DLE124DHE4 (control unit) To be used in conjunction with the following tap spouts: TENA40AWV105 (114mm height spout), DLE110ANE4 (169mm height spout), DLE110A2NE4 (332mm height spout).
  • Manufacturer: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006341

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator (not verified by the test facility) and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.

  • Section: 0278 Bidets and associated fittings
  • WRAS Approval Number: 2006341
  • Expiry date: 30/06/2025
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: Toto, washlet, model, manufacturers address and other technical information on rear of product. Toto on body.
  • Installation Requirements R001
  • Model
    TCF994WGE#NW1 Neorest EW; WC seat with integrated bidet shower function. TCF994RWGE Neorest EW 2.0; WC seat with integrated bidet shower function; additional functions. TCF403EGV1 Washlet SG; WC seat with integrated bidet shower function. TCF403REGV1 Washlet SG 2.0; WC seat with integrated bidet shower function.
  • Factor: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006342

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator (not verified by the test facility) and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.

  • Section: 0278 Bidets and associated fittings
  • WRAS Approval Number: 2006342
  • Expiry date: 30/06/2025
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: Toto, washlet, model, manufacturers address and other technical information on rear of product. Toto on body.
  • Installation Requirements R001 R009
  • Model
    TCF6532GE#NW1 Washlet GL 2.0; WC seat with integrated bidet shower function; side connections. TCF6532C3GV1 Washlet GL 2.0; WC seat with integrated bidet shower function; hidden connections. TCF6632GE#NW1 Washlet EK 2.0; WC seat with integrated bidet shower function; side connection. TCF6632C3GV1 Washlet EK 2.0; WC seat with integrated bidet shower function; hidden connections.
  • Factor: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005342

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10.0 bar. Cold water supply only.

  • Section: 0278 Bidets and associated fittings
  • WRAS Approval Number: 2005342
  • Expiry date: 31/05/2025
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: TOTO on casing and seat cover. TOTO model, address, QR reader & other technical information on adhesive label on rear of seat.
  • Installation Requirements R001 R009 R574
  • Model
    TCF801CG Washlet RW; WC seat with integrated bidet shower function TCF803CG Washlet SW; WC seat with integrated bidet shower function; with scale removal function TCF802C2G Washlet RW; WC seat with integrated bidet shower function; with auto flush control function TCF804C2G Washlet SW; WC seat with integrated bidet shower function; with auto flush control function
  • Factor: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005343

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). . The inlet incorporates a strainer and flow regulator (not verified by the test facility) and is pumped form an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10.0 bar. Cold water supply only.

  • Section: 0278 Bidets and associated fittings
  • WRAS Approval Number: 2005343
  • Expiry date: 31/05/2025
  • Size: Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
  • Marking: TOTO on casing and seat cover. TOTO model, address, QR reader & other technical information on adhesive label on rear of seat.
  • Installation Requirements R001 R009 R574
  • Model
    TCF794CG WASHLET RX; WC seat with integrated shower function; (round seat shape) TCF796CG WASHLET SX; WC seat with integrated shower function;(square seat shape) TCF894CG WASHLET RX; WC seat with integrated shower function; with water function (round seat shape) TCF896CG WASHLET SX; WC seat with integrated shower function; with water function (square seat shape) TCF895CG WASHLET RX; WC seat with integrated shower function; with water function and auto flush control function (round seat shape) TCF897CG WASHLET SX; WC seat with integrated shower function; with water function and auto flush control function (square seat shape)
  • Factor: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2103310

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The inlet incorporates a strainer and flow regulator. Maximum working pressure 10.0 bar. Cold water supply only.

  • Section: 0278 Bidets and associated fittings
  • WRAS Approval Number: 2103310
  • Expiry date: 31/03/2026
  • Size: Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
  • Marking: TOTO on remote control
  • Installation Requirements R001 R009 R574
  • Model
    Washlet RG range: TCF34270GEU – (with deodorizer) TCF34170GEU – (concealed connection) TCF34120GGB – (side connection)
  • Manufacturer: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110310

Deck mounted single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Tempearture is controlled from a separate control unit incorporating a thermostatic cartridge, which is operated by a single lever on the side of the unit. The spout connects to the unit via a (transparent) PEX-b pipe. The inlets of the control unit incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the unit incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0684 Combination Tap Assemblies
  • Section Subtitle: Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
  • WRAS Approval Number: 2110310
  • Expiry date: 31/10/2026
  • Size: ½” BSP (M) (to control unit).
  • Marking: Toto on spout. Toto and model on adhesive label on control unit.
  • Installation Requirements R001 R006 R007 R010
  • Model
    TLP01701G (Spout with IR sensor) TLP01702E1 (Control unit with thermostatic mixer)
  • Factor: TOTO Europe GmbH
    Company Name
    TOTO Europe GmbH
    Address
    Zollhof 2 40211 Düsseldorf Germany
    Phone
    +49 211 273080
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1