Section Code 2010 : Blending, thermostatic.
Back To Directory SectionsT-type thermostatic blending valve with a thermostatic cartridge controlling the temperature. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) with optional trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The inlets incorporate an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The hot and cold inlets within the valve body each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model YH3500-4 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating push type operated diverter to shower outlets (shower outlets not supplied). The inlets incorporate stainless steel strainers and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of wall mounted two-hole, thermostatic blending valves (chromium plated brass) incorporating a non-rising spindle headwork with single lever operating member. Both inlets incorporate a stainless-steel strainer and approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides adequate backflow protection. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating stainless steel strainers at the inlets. The flow is controlled by a non-rising headwork with single lever operating member and the temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Supplied with a shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating three, push type operated flow control headworks to optional shower outlets with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless-steel strainers and single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates stainless steel strainers on the inlets of the valve. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models (122323 and 122323V) incorporate a 3-way diverter. Model (122328) incorporate a 2-way diverter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product also incorporates a self-cancelling diverter. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C
Range of wall mounted, thermostatic blending valve shower set, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The overhead shower inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic (shower) blending valves with brass bodies (chromium plated or brushed nickel finishes). Flow is controlled by a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge with a cross top operating member and a separate manual override button. Both inlet elbows incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic blending valve shower sets, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset (neither supplied). Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar Maximum operating temperature 60°C
Wall mounted, concealed, thermostatic blending valves with brass body (various finishes). The temperature is controlled via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
T-type thermostatic mixing valve with a DZR brass body. Temperature is pre-set under a fixed cap. The 90° angled inlet adaptors (AI0496BAG.2 & AI0505SBAG.2) incorporate stainless-steel strainers, integral spherical valves and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. From November 2020 the products are also available with chrome plated brass inline inlet adaptors (AI090815.1 & AI090822.1), each incorporating a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). They can also be supplied with chrome plated brass 90° angled inlet adaptors (AI0496BAG.1 & AI0505SBAG.1) which incorporate a stainless-steel strainer, integral spherical valves and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Exposed thermostatic shower blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a single lever operating memerb. Temperature is controlled independeanlty via a thermostatic cartridge, also using a single lever operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted exposed thermostatic shower mixing valve with brass bodies (various finish) incorporating a ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Model 13108 incorporates a manual diverter headwork which controls flow and diverts water to either handset or shower head with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets), incorporating either a quarter turn or half turn ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Each inlet incorporates a stainless-steel strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate that it provides backflow protection. The product incorporates a manual diverter that diverts the flow from the overhead shower to a shower hose and handset (not supplied as part of the approval). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of thermostatic blending valves (chromium plated brass body) with a thermostatic cartridge controlling the temperature. The inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T-type thermostatic blending valve (chromium plated DZR brass). The inlets incorporate stainless steel strainers and single check valve cartridges (verified by test - suitable for backflow prevention against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) incorporating a thermostatic cartridge controlling the temperature with a manual override button and dome, single lever, cubed or cross top operating members. Flow is controlled via a ceramic disc diverter which also diverts water to two different outlets. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic shower valves (chromium plated brass bodies). Flow is controlled to three separate outlets via a ‘detent’ (push on/push off) headwork that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water to either overhead shower, shower handset or both. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The hot and cold inlets within the valve body each incorporate a non-approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. This approval includes a shower hose, handset and overhead shower Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve (plastic body) with a trim set (chrome plated). Flow is controlled via ‘detent’ (push on/push off) headwork that also incorporates a ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Each inlet incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and shower handset. The inlet to the shower handset incorporates a plastic strainer and plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatically controlled shower valves with brass bodies. Flow is either controlled by a ceramic disc headwork or 3-way manual diverter. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provide backflow protection. Maximum working pressure 10.0 bar, Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower valves, comprising of a concealed body and trim set (chrome plated brass), an overhead shower and a shower handset. The flow is controlled by a 3-position manual diverter with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, shower valve (chromium plated brass), incorporating a ceramic disc diverter with a dome type operating member controlling the flow between an overhead shower outlet and a shower hose and handset. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset incorporates a plastic strainer on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.
Range of T-type thermostatic blending valves with DZR brass bodies (various finishes). Each inlet of the Heat 112010 Easifit TMV model (compression connections) incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The inlets of all other Easifit TMV models (push-fit connections) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models Heat155002 Easifit & Heat155010 Easifit to be used with copper (EN 1057), PB (BS7291-2) & PEX (BS7291-3) pipe. All other models to be used with copper (EN 1057). Maximum working pressure of 6.0 bar (model Heat 112010 Easifit. Maximum working pressure of 10.0 bar (all other models). Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with brass bodies and EPDM ‘O’-rings. Maximum working pressure 14.0 bar. Maximum operating temperature 90°C
Grohe ‘NTempeste Cosmopolitan 210’ wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate a combined washer and stainless steel strainer. Both the inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The overhead shower and the shower handset incorporate a plastic strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Grohe ‘NTempCosmopolitan 210’ wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate a combined washer and stainless steel strainer. Both the inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The overhead shower and the shower handset incorporate a plastic strainer and plastic flow regulator on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either shower outlet. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge both have single lever operating members. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic blending valves with chrome plated DZR brass bodies incorporating angled inlets with integral spherical valves. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C
Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a half turn ceramic disc headwork controlling the flow, thermostatic cartridge controlling the temperature and dome operating members with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protectionProduct is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted, thermostatic blending valve shower sets, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a chrome plated wall elbow, shower hose, shower handset and overhead shower with arm. The shower handset has a plastic strainer on the inlet. The overhead shower and the shower handset inlets incorporate a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type, thermostatic shower mixing valves (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic with a dome type operating member incorporating a manual over ride button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60 °C
Range of wall mounted two-hole, thermostatic blending valves (chromium plated brass) incorporating a non-rising spindle headwork with single lever operating member. Both inlets incorporate a stainless-steel strainer and approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides adequate backflow protection. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model 3663602665083 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either a shower outlet or a combined bath filler and overflow. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge have single lever operating members. Both inlets to the main shower valve as well as to the combined bath filler/overflow incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets to the main shower valve also incorporate a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (SH-T8089 model), dome (SH-T80810 model) or cross top (SH-T80811 model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a single sequential headwork with a single lever operating member. The inlet couplings incorporate a plastic flow regulator & plastic strainer. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC
Range of concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets of models PEG402UA, PEG402UAX, TX402UA, TX402UAX incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of concealed wall mounted thermostatic shower valves with brass bodies incorporating quarter turn ceramic disc headwork and a two-way, half-turn ceramic disc manual diverter. Temperature is controlled independently via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets on the ½” models also incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C
Range of thermostatic blending valves (chromium plated or nickel plated brass). Both inlets incorporate a plastic strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves with brass body. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of deck mounted thermostatic mixing valves with brass bodies, Model B/RP-T2-01 has a single lever and model P/RP-T2-01 has a cross top operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C
Range of concealed thermostatic blending valves with brass bodies (available in a variety of finishes). The product incorporates a manual diverter valve (which controls flow and also diverts between two shower outlets – shower outlets not supplied) with single lever, or cross top operating members (depending on trim kit). The temperature is controlled independently with either wheel type, dome type, cross top or single lever operating members (depending on trim kit). The inlets incorporate approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of wall mounted, concealed, manual blending valves with brass body (chromium plated brass trim-set) Incorporating a self-cancelling diverter (overhead shower to shower handset) The flow and temperature are both controlled by a ceramic cartridge headwork with a dome type or single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, bar type thermostatic mixing valve (chromium plated brass). Temperature is controlled with thermostatic cartridge which incorporates a manual override button with a dome type operating member. The flow is controlled with a quarter turn ceramic disc headwork with a dome type operating member. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates a stainless steel strainer on the inlets. Product is also supplied with metal backnuts. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ceramic disc headworks, the top outlet is controlled by a ¼ turn ceramic disc, the bottom outlets are controlled by a 2 way shower to shower ceramic disc diverter headwork. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome, single lever, cross top or cube type operating members. The inlets each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic shower valves with brass bodies (various finishes) incorporating a 2 way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic strainer. The overhead shower inlets incorporate a combined washer and stainless steel strainer. The overhead shower inlets on the 27 268 & 27 281 models also incorporate plastic flow regulators. The inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
‘GRT 3000 Cosmopolitan’ wall mounted, thermostatic shower valve (brass body - available in various finishes) incorporating a 2 way ceramic disc diverter headwork controlling and diverting the flow between either a shower outlet or bath outlet. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow to an overhead outlet. The product also incorporates a 2 way manual ceramic disc diverter headwork, controlling and diverting the flow between two bottom shower outlets. Temperature is controlled independently via a thermostatic cartridge. The JD-ATS311** model has single lever operating members, the JD-ATS312** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of Saracen concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets of model 171678 & 171679 incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type, thermostatic shower mixing valves (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic with a dome type operating member incorporating a manual over ride button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60 °C
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets) incorporating a quarter ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The SH-T8565, SH-T8569, SH-T8567, SH-T85619, SH-T8561, SH-T85616, SH-T85622 and SH-T8563 models also incorporate a stainless steel strainer on each inlet. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of exposed and concealed thermostatic blending valves (brass bodies) incorporating a single sequential headwork controlling both flow and temperature. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Model 1.0.409.48.1 is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted, thermostatic blending valve shower mixer, incorporating a ceramic disc headwork with dome shape operating member. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8 bar. Maximum operating temperature 85°C
Range of wall mounted, concealed thermostatic shower control valves. The concealed bodies are brass with a chromium plated trim set. Flow and temperature are controlled by a sequential cartridge headwork with various operating members. The inlets incorporate stainless steel strainers & flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes). The product does not include any flow controls it is only a manual diverter valve, diverting the flow between the shower hose and handset and the overhead shower outlet. Temperature is controlled independently via a thermostatic cartridge. The JD-A511** model has single lever operating members, the JD-A817** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. The product is supplied with a shower arm and overhead shower, wall elbow, shower hose and shower handset. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) (concealed or exposed) with a thermostatic cartridge sequential headwork controlling both flow and temperature via a dome type operating member. Inlets incorporate plastic flow regulators. Model 1.1651.008 is supplied with overhead shower outlet. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The LH3500-6 model has cube type operating members, the LH5427 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The LH3500-6 model has cube type operating members, the LH5427 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T-Type thermostatic mixing valves (chrome plated brass bodies). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted, thermostatic shower valve (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge also using a dome type operating member that incorporates a manual override button. The shower riser incorporates a manual diverter which diverts between the overhead shower and the shower hose and handset. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower rose, shower hose and handset. Maximum working pressure 6.0 Bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members (depending on model). The temperature is controlled independently via a thermostatic cartridge with single lever, cube type, dome type or cross top operating members (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a two way ceramic disc diverting the flow between two shower outlets, temperature is controlled independently by a thermostatic cartridge with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a fixed over head shower, hose and headset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T type thermostatic blending valve having a DZR brass body and NBR o rings. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and EPDM `O`-rings incorporating a thermostatic cartridge controlling the temperature. Each inlet incorporates a stainless steel strainer and models 252714 & 252713 have approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Models 252714 & 252701 have a maximum operating temperature 99°C. Model 252713 has a maximum operating temperature of 85°C
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes). The product does not include any flow controls it is only a manual diverter valve, diverting the flow between the shower hose and handset and the overhead shower outlet. Temperature is controlled independently via a thermostatic cartridge with single lever operating member. The thermostatic valve operating member incorporates a manual override button. The product is supplied with a shower arm and overhead shower, wall elbow, shower hose and shower handset. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The inlets to the main body as well as to the overhead shower incorporate a combined washer and stainless steel strainer. Both inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet to the overhead shower also incorporates a plastic flow regulator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Rada electronically controlled thermostatic blending valve. With a stainless steel body, EPDM ‘o’ rings and seals. Maximum working pressure 13.8 bar. Maximum operating temperature 85°C
Range of thermostatic mixing valves having brass bodies and either 1 way, 2 way or 3 way optional outlets depending on model controlled by a cermic disc diverter. The temperature is controlled independently via a thermostatic cartridge having various operating member and facia plate options. To be installed with the universal built in box E134001 (which is not approved in its own right) Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic disc headwork which controls the flow with dome operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporate a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted concleaed thermostatic shower valves (chromium plated or matt black) incorporating a manual diverter and quarter turn ceramic disc headwork which control the flow using either cross top (803252J & 803252S), cubed (803252E) or single lever (803252C, 803252C MBK1, 803252K, 803252P & 803252V) operating members. Temperature is controlled independently via a thermostatic cartridge also using either cross top, cubed, dome type or single lever operating members. Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
‘UNI-BOX’ Range of wall mounted, concealed thermostatic blending valves with brass bodies and plastic or chromium plated brass trims. Models 5185000, 5186000, 5324000 & 5324300 have 3 outlet connections, whilst models 5185100, 5186100, 5342100 & 5324400 have two outlet connections. Models 5185200, 5186200, 5324200 & 5324500 have only one outlet. Temperature in all models is controlled independently via a thermostatic cartridge, whilst flow is both controlled and diverted by a ceramic disc headwork. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.
‘M series’ Range of wall mounted, concealed thermostatic blending valves with brass bodies and plastic or chromium plated brass trims. Check vales are located on the hot and cold inlets of the rough in unit which also include stainless steel strainers. Models 5119200 have 3 outlet connections, whilst model 5119300 have 4 outlet connections. Temperature in all models is controlled independently via a thermostatic cartridge, flow is both controlled and diverted by a ceramic disc headwork. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.
Range of concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Bar type exposed thermostatic mixing valve. Flow is controlled via a ½ turn ceramic disc headwork using a single lever operating member. Temperature is cortrolled via a thermostatic vale also using single lever operating members. Incorporates isolatation valves and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of coneaceled thermostatic mixing valves. Temperature is controlled independently via a thermostatic mixing valve using either cross top, single lever or dome type operating members. Flow is controlled via Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, exposed, bar type thermostatic shower valve (various finishes) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (TO2WV01 model), dome (CO2WV01 model) or cross top (SH-T80811 model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Range of T-type thermostatic mixing valves (brass bodies). All models incorporate a stainless-steel strainer a single check valve in both the inlet connections (suitable for backflow protection up to fluid category 2). Models 1TMC201 and 1TMC202 incorporate isolation valves in the inlet connections. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Range of thermostatic mixing valves having brass bodies and either 1 way, 2 way or 3 way optional outlets depending on model controlled by a cermic disc diverter. The temperature is controlled independently via a thermostatic cartridge having various operating member and facia plate options. To be installed with the universal built in box Crossbox (which is not approved in its own right) Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted two hole, single outlet (fixed) thermostatic bath / shower mixing tap (in various finishes). Incorporating half turn /ceramic disc headworks, dome type operating members and manual diverter to shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. The both inlets incorporate a single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and a stainless steel strainer. Maximum working pressure 8 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
Range of wall mounted thermostatic shower valves (brass bodies - with various finishes), incorporating a quarter turn ceramic disc headwork diverting the flow between multiple shower outlet connections. Temperature is controlled independently via a thermostatic cartridge. Products are available with various operating members and faceplates. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic blending shower valve with single sequential headwork, having a brass body with various finishes comprising of an overhead shower outlet connected via a chromium plated copper riser supply pipe with a hose and hand shower supplied via a diverter valve, operated by a hand wheel operating member. The inlet to the hand shower handset incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower valves (brass bodies), incorporating a half turn ceramic disc headwork controlling the flow to either shower outlet with various operating member options depending on model variations. The temperature is controlled independently via a thermostatic cartridge also using various operating members which incorporates a manual override button. Inlet incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
Wall mounted, concealed, thermostatic shower valve, (brass bodies with trim sets in various finishes), incorporating a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a single lever operating member. The inlets each incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of floor standing, two-hole, single outlet, thermostatic blending valves (various finishes). Incorporating a sequential headwork controlling both flow and temperature with a single lever operating member. The product incorporates a self-cancelling diverter to overhead shower with a dome operating member. Outlet of the diverter incorporates approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with shower hose and shower handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
Range of concealed thermostatic bath/shower mixer valves (brass bodies), the valve can be supplied as a dedicated thermostatic valve or with a ¾” stop valve, 2way diverter or a 3way diverter that also controls the flow. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with various designs of face plates and operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, bar type thermostatic shower mixing valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever, dome, cubed or cross top operating member (depending on model). The temperature is controlled independently via a thermostatic cartridge with a single lever, dome, cubed or cross top operating member (depending on model) and incorporates a manual override button. The product also incorporates an approved check valve cartridge located on the inlets of the valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products also incorporate a stainless-steel strainer located on the inlets of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Range of wall mounted concealed digital blending, thermostatic shower units with plastic bodies with single or double outlets. Flow is controlled via solenoid valve. The units incorporate flow regulators, check valves, stainless steel strainer and EPDM O-rings. Models with “I” at the end of the model number are supplied with pushfit isolation valves on the inlets. Incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, concealed, digitally controlled thermostatic blending valve with a plastic body. Flow is controlled by an electronically operated mechanical valve and then to each outlet by a solenoid valve which is actuated via a touch sensor. Temperature is controlled by an electronically operated mixing valve containing a thermostatic element. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The cold inlet incorporates a plastic flow regulator. Models with an ‘I’ suffix are supplied with two brass bodied 15mm x 15mm pushfit screwdriver operated isolation valves, for installation on each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C
Range of wall mounted two hole thermostatic blending valves having brass bodies (various finishes). Incorporating a 2 way ceramic disc diverter (2 on, 1 off) flow control which also diverts the flow from a shower to shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type or lever type operating members. Inlets incorporates approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating a manually operated diverter from overhead shower to shower handset, with a half turn ceramic disc headwork controlling the flow using a dome or cube type operating member depending on model. Product is supplied with a riser, shower hose, shower handset and over head shower The temperature is controlled independently via a thermostatic cartridge also using a dome or cube type operating member (Depending on model) that incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The 3663602665946 model has cube type operating members, the 3663602664956 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button and dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic shower valves with brass bodies (various finishes) Incorporating ceramic disc headworks, and dome type operating members and a self cancelling diverter to the shower outlets. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic flow regulator. Inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with dome or cube type operating member. Temperature is controlled independently via a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates a stainless steel strainer located on both inlets. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C
Range of thermostatic mixing valves (brass body) with a thermostatic cartridge controlling the temperature. Models are supplied with dome or cube type operating members and a chrome faceplate. Each inlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.
Range of wall mounted concealed thermostatic blending valves (brass), incorporating either quarter turn ceramic disc headworks (models PG-2107-1 & PG-2108-1) with either dome type (PG-2108) or single lever (PG-2108-1) operating members, or a manual diverter (models PG-2107 & PG-2108) with either cube type (PG-2107) or single lever (PG-2108) operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.
Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models ST20015CP & COOR incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass). Flow is controlled by a quarter turn ceramic cartridge headwork and temperature is controlled independently via a thermostatic cartridge, both with dome operating members. Both inlets incorporate stainless steel strainers. Some valves are supplied with shower hose, riser rail and shower handset (please refer to model). Some valves are supplied with shower hose, riser rail, shower handset & overhead shower (please refer to model). On these models the flow is diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork. The inlets of models (Atom ERD – (1.1836.003) Coda Pro ERD – (1.1836.006) Relate ERD – (2.1878.002) Reflex ERD – (2.1878.004) APT ERD – (1.1878.008) & React ERD – (2.1878.006) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a two way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome or cube type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. Each inlet incorporates a stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Thermostatic mixing valve with brass body. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valves (chromium plated brass body), incorporating a quarter turn ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature, both with dome type operating members. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, two-hole, thermostatic shower valves (chromium plated brass). In models TLM28F, TLM28G, TLM28H, TLM28I, TLM90, TLM90B, TLM95, TLM95B and TLM01F flow is controlled via a quarter turn ceramic disc headwork with dome or cube operating members. In models TLM46F, TLM46G, TLM46H, TLM46I, TLM39F and TLM39G flow is controlled via a half turn ceramic disc headwork with dome or cube operating members. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Shower kit consisting of a wall mounted thermostatic bar type shower valve with a non-rising spindle headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge which incorporates a manual override button with dome operating members. The inlets incorporate a stainless steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides back flow protection. Product also comes with a stainless steel braided hose with EPDM lining, a chromium plated plastic shower handset and riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) or Black incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (9323T & 9323TBL Model), dome (9320T & 9320TBL Model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Wall mounted, thermostatic shower blending valve (chromium plated brass), incorporating a non- rising spindle headworks with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button and a single lever operating member. Both inlets incorporate stainless-steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate It provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member which controls the flow and an independent thermostatic cartridge controlling the temperature with a single lever operating member. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower blending valves (DZR brass) and chrome plated trim sets, incorporating quarter turn ceramic disc headworks controlling the flow with single lever operating members. The 3552697090 model has two headworks controlling the flow to two independent outlets. The 3554697090 model has three headworks controlling the flow to three independent outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Grohtherm’ THM range of wall mounted, thermostatic shower blending valves, incorporating a 2-way ceramic disc headwork (central off position) with a single lever operating member controlling and diverting the flow to either an overhead shower outlet or bath outlet (not supplied). Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, digitally controlled thermostatic blending valve with a plastic body, flow is controlled by solenoid valves actuated via a touch sensor. Both inlets incorporate approved single check valve cartridges (however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection). Maximum working pressure 6.0 Bar. Maximum operating temperature 80ºC.
Range of T-type thermostatic mixing valves with DZR brass bodies, EPDM ‘O’-rings. The product is supplied with a specific tool that allows a manual override of the valve for disinfection purposes. Maximum working pressure 14.0 Bar. Maximum operating temperature 90°C.
Range of wall mounted, thermostatic shower valves (chromium plated brass), incorporating a ceramic disc headworks controlling the flow to either overhead or hand showers (not supplied) using dome type operating members. Temperature is controlled independently via a thermostatic cartridge, also using a dome type operating member. Inlets incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating a ceramic disc headwork which controls the flow to optional shower outlets using single lever operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating member incorporating a manual override button. Inlets incorporate stainless steel strainers and approved single check valves however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted, bar type thermostatic shower valve (chromium plated brass) incorporating quarter turn ceramic disc headwork with dome type operating members and manual override. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate stainless steel strainers and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted two-hole, single outlet (fixed) shower mixers (brass bodies chromium plated), temperature is controlled independently via a thermostatic cartridge. The flow is controlled via a 2 way ceramic disc headwork which controls the flow to the over head and handheld shower outlets (not supplied) and is operated by various operating members. The thermostatic valve operating member incorporates a manual override button. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of bar type thermostatic mixing valves. Flow is controlled via a quarter turn ceramic disc headwork using a dome type operating memeber. Temperature is controlled independently via a thermostatic mixing valve also using a dome type operating memeber. Inlets incorporate a single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model FZ SHXMMCTFF C is supplied with a shower hose, shower handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of bar type thermostatic mixing valves, incorporating a quarter turn ceramic disc headwork controlling the flow using a down type operating member. Temperature is controlled via a thermostatic cartridge also using a dome type operating member. Inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models ZI SHXSMCT C & ZI SHXSMCTFF C are supplied with a shower hose, handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed thermostatic shower blending valves with a DZR brass body and trim set (various finishes and operating members - see model section). The C78023 models incorporate a ¼ turn ceramic disc valve controlling the flow to a single shower outlet. The C78024 models incorporate a 2 way ceramic disc headwork controlling the flow between 2 shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted thermostatic bar type shower valves with a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic bar type shower valves with a quarter turn ceramic disc headwork controlling the flow with a cubed operating member. The temperature is controlled independently via a thermostatic cartridge with a cubed operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic bar type shower valves with a quarter turn ceramic disc headwork controlling the flow with a cubed operating member. The temperature is controlled independently via a thermostatic cartridge with a cubed operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T-Type thermostatic mixing valve (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted two hole thermostatic shower valve having a brass body (various finishes) Incorporating quarter turn ceramic disc headworks, and dome type operating members and stainless steel strainers. The temperature is controlled independently via a thermostatic cartridge and dome/lever/crosstop operating member. Inlets incorporate a single check valve assembly, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models IN10015CP incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
A range of wall mounted, concealed thermostatic shower blending valves with a DZR brass body and trim set (various finishes and operating members - see model section). The C99865ST-9 model controls the flow to two shower outlets. The C78024 models controls the flow between 3 shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Concealed wall mounted thermostatically controlled 3 button shower outlet. Flow is controlled to 3 optional outlets via click button flow control headwork. The temperature is controlled independently via a thermostatic control valve and lever type operating member. Inlets incorporate a single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides suitable backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of concealed thermostatic blending valves having brass bodies and NBR ‘O’-rings, incorporating a ceramic cartridge headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a various operating members. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection), plastic filters and flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Concealed, wall mounted, thermostatic blending valve (brass body) with chromium plated trim set incorporating a single sequential headwork controlling flow and temperature with a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an optional 15mm compression isolation valve for each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve shower valve with brass body, incorporating a ceramic disc headwork with dome or cubed type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome or cubed type operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a two way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome or cube type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. Each inlet incorporates a stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of Wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
‘Securitouch’ range of wall mounted, manually operated, exposed shower valves (chromium plated brass), incorporating a ceramic cartridge headwork controlling both flow and temperature using a single lever operating member. The products (except for S suffix models) are supplied with ¾” x ½” offset union adaptors which incorporate a servicing valve. The inlets of models containing EP include plastic filters and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. All other models incorporate plastic flow regulators on each inlet and an approved single check valve cartridge on the outlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed bar type thermostatic blending valve (chromium plated brass), incorporating a quarter turn ceramic disc controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of concealed, thermostatic blending valves (brass body). The flow is controlled via ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Thermostatic mixing valve with a brass body (chromium plated) with EPDM ‘O’-rings. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow to either the overhead shower or hand shower with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves (chromium plated brass), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. Both inlets incorporate a stainless-steel strainer and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate plastic flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic shower valves with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with cross top operating members incorporating a manual override button, the inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection and a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower valves (brass bodies) incorporating quarter turn ceramic disc headwork controlling the flow with cross top, dome type or single lever operating members. The temperature is controlled independently via a thermostatic cartridge with cross top, dome type or single lever operating members. Product also incorporates a two position manual diverter. Both inlets incorporate an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of wall mounted two hole, shower outlet thermostatic shower mixing valves (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork and temperature is independently controlled via a thermostatic cartridge with cross top, dome type or single lever operating members. Inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of wall mounted bar type thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic disc headwork controlling the flow with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge also using single lever type operating member. Both inlets incorporate stainless steel strainers and approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic mixing valves (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature using a single lever operating member. Inlets incorporate servicing valves and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes). The product does not include any flow controls it is only a manual diverter valve, diverting the flow between the shower hose and handset and the overhead shower outlet. Temperature is controlled independently via a thermostatic cartridge & single lever operating members.The thermostatic valve operating member incorporates a manual override button. The product is supplied with a shower arm and overhead shower, wall elbow, shower hose and shower handset. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a half turn ceramic disc headwork controlling the flow, thermostatic cartridge controlling the temperature and dome operating members with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protectionProduct is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Single hole, single outlet combination tap assembly (chromium plated brass) incorporating a sequential headworks with single lever operating member to control both the flow and temperature. The outlet incorporates a plastic flow straightener. The product also incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Wall mounted exposed bar type thermostatic blending valve (chromium plated brass) with a half turn ceramic disc headwork controlling the flow and a thermostatic cartridge controlling the temperature, both with cubed type operating members incorporating manual override buttons. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60.0°C
Wall mounted, concealed, thermostatic mixing valves with brass bodies (various finishes). The flow is controlled independently via a quarter turn ceramic disc headwork with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating member which incorporates a manual override button Both inlets incorporate approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Wall mounted, thermostatic mixing valve (various finishes), incorporating a ceramic cartridge diverter controlling the flow between the 3 outlets and the off position. The temperature is controlled independently via a thermostatic cartridge with single lever operating members which incorporate a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum working temperature 85°C.
Wall mounted, thermostatic shower valve (chromium plated brass). The flow is controlled by a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled by a thermostatic cartridge with dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a stainless steel braided, PVC lined shower hose, chrome plated plastic shower handset and riser rail. The inlet of the shower handset incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
Thermostatic blending valve incorporating a thermostatic cartridge controlling the temperature and ceramic disc headwork controlling the flow with dome type operating members. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed bar type shower mixer (chromium plated brass). Flow is controlled by a solenoid valve. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C
Range of wall mounted, bar-type thermostatic shower valves with brass bodies (chromium plated), incorporating a non-rising spindle headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which incorporates a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic blending valve (brass bodies). Both inlets have stainless steel filters and incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). The product also incorporates a push button headworks and the temperature is controlled independently via a thermostatic cartridge. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted concealed modular thermostatic mixing valve (brass body). The product is supplied with a shower hose and handset and incorporates additional outlet ports to supply shower outlet configuations controlled by push button flow control headworks. Primary flow control is via a half turn ceramic disc headwork and dome type operating member. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Inlets incorporate stainless steel strainers and single check valve cartirgdes however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of bar type thermostatic mixing valves, incorporating a quarter turn ceramic disc headwork controlling the flow using a down type operating member. Temperature is controlled via a thermostatic cartridge also using a dome type operating member. Inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are supplied with a shower hose, handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of bar type thermostatic mixing valves. Flow is controlled via a quarter turn ceramic disc headwork using a dome type operating memeber. Temperature is controlled independently via a thermostatic mixing valve also using a dome type operating memeber. Inlets incorporate a single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.Shower hose, shower handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of T-type thermostatic mixing valves (chromium plated brass). Each inlet incorporates a stainless steel strainer and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Single hole, single outlet combination tap assembly (chromium plated brass) incorporating a sequential headworks with single lever operating member to control both the flow and temperature. The outlet incorporates a plastic flow straightener. The product also incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Range of wall mounted, thermostatic shower valves with chromium plated brass body. Flow is controlled by a quarter turn ceramic disc headwork with single lever operating members. Temperature is controlled by a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of shower kits consisting of a wall mounted thermostatic shower mixer with brass bodies (various finishes) incorporating a ceramic disc headworks controlling the flow, temperature is controlled via a thermostatic cartridge and single lever operating members. Supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic mixing valves. Flow is controlled via a quarter turn ceramic disc headworks to two shower outlets.Temperature is controlled independently via a thermostactic mixing valve with various operating members. Inlets incorporate stainless steel strainers & single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2) and a stainless-steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted, thermostatic shower valves. Models TF1S, ARC73 NKL, HOX.024CP, HOX.024MB, GUI.023. HOX.006, HOX.024BB, GUI.024 HOX.006, RIV2 CHR & RIV GOLD are concealed and have a single outlet. Models GUI.023 HOX.005, TF2S, ARC64 NKL, TF3S, HOX.023CP, HOX.023MB, HOX.023BB, GUI.024 HOX.005, RIV3 CHR & RIV3 GOLD are concealed and have a double outlet. Model AF1S is exposed and has a single outlet. Model AF3S & ARC74 NKL are exposed and have a double outlet. Models TF2S, TF3S and AF3S are supplied with a shower hose handset. The flow is controlled by a quarter turn ceramic disc or two-way manual diverter with cross top or single lever operating members. The temperature is controlled independently via a thermostatic cartridge with cross top or single lever operating members The inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection, models beginning with ‘TF’ incorporate a stainless-steel strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower valves with chromium plated brass body. Flow is controlled by a quarter turn ceramic disc headwork with single lever operating members. Temperature is controlled by a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of thermostatic blending valves with brass bodies (various finishes, see models), incorporating a thermostatic cartridge that controls the temperature. Supplied with either lever or cross top operating members depending on model. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 85ºC.
Range of wall mounted concealed shower mixer (brass body) incorporating a 3-way manual diverter valve controlling and diverting the flow with a dome type or single lever operating member (see model). The temperature is controlled independently via a thermostatic cartridge with a dome type or single lever operating member (see model) incorporating a manual override button. Both inlets and the shower outlet connection incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic blending valve (brass body), incorporating a half turn ceramic disc headwork controlling the flow with a dome type (Rakama) or single lever (Rakita) operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type (Rakama) or single lever (Rakita) operating member incorporating a manual override button. The inlets incorporate approved check valve cartridges. However, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies (various finishes, operating members and trim kits - SD127 prefix models are available in the following finishes - Chrome (CR), Brushed Black (BBR), Brushed Black, Matt Black (MB). All other models are available in Chrome (CR) finish). The 2500 model variants incorporate a ¼ turn ceramic disc headwork controlling the flow to a single outlet. The 2501 model variants incorporate a 2 way ceramic disc diverter (2 on, 1 off) controlling the flow between two outlets. The 2503 model variants incorporate two ¼ turn ceramic disc headworks controlling the flow to two separate outlets. The 2504 model variants incorporate a 2 way ceramic disc diverter (2 on, 1 off) controlling the flow between two outlets and an additional a ¼ turn ceramic disc headwork controlling the flow to a separate single outlet. In all models the temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed 2 and 3 outlet thermostatic mixers with brass bodies and thermostatic cartridge controlling the temperature. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brushed chrome brass bodies and a thermostatic cartridge controlling the temperature. Models TM200VP-3/4ZC and TM200VP-3/4ZD incorporate isolation valves and stainless steel strainers on the inlets. All models incorporate check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Range of wall mounted thermostatic shower valves with brass bodies (various trims & finishes), supplied with shower hose and handset. The flow is controlled via a quarter turn ceramic disc headwork with dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, concealed thermostatic blending valves incorporating brass bodies and various head works. GR-AZ-50 model x1 ¼ turn ceramic disc headwork controlling the flow. GR-AZ-51 model x1 manual diverter controlling the flow. GR-AZ-52 model x2 ¼ turn ceramic disc headworks controlling the flow. GR-AZ-53 model x1 ¼ turn ceramic disc headwork controlling the flow and x1 manual diverter only. All models have an independent thermostatic cartridge controlling the temperature with a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member which controls the flow and an independent thermostatic cartridge controlling the temperature with a single lever operating member. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, thermostatic shower blending valve (brass bodies). The product has two outlets, each controlled by a detent (push to on, push to off) headwork. Temperature is controlled independently via a thermostatic cartridge, (no operating member supplied). Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of shower kits consisting of a deck mounted thermostatic shower mixer with brass bodies (chrome plated), incorporating a ceramic disc headworks controlling the flow with a dome type operating member and a manual diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. The spout outlet incorporates a plastic aerator. Supplied with a shower hose & shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted thermostatic shower mixing valves with brass bodies (chrome plated), incorporating a ceramic disc headworks controlling the flow with a dome type operating member and a manual diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. The spout outlet incorporates a plastic aerator. Models TLVEFLF, SHTLV106/1BK, PP SHTLV106/1BK & SHTLV106/2BK are supplied with a shower hose & shower handset, riser rail & soap tray. Model TLV106 is supplied with a shower hose & shower handset. All models are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, bar-type thermostatic shower valves with brass bodies (chromium plated), incorporating a non-rising spindle headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which incorporates a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
Range of wall mounted concleaed thermostatic shower valves (chromium plated or matt black) incorporating a manual diverter and quarter turn ceramic disc headwork which control the flow using a single lever operating members. Temperature is controlled independently via a thermostatic cartridge also using either cross top, cubed, dome type or single lever operating members. Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
Range of wall mounted concealed thermostatic shower valves (brass bodies), incorporating a ceramic disc controlling the flow. The temperature is controlled independently via a thermostatic cartridge, using dome type operating members incorporating a manual override button. The inlets incorporate an approved single check valve cartridge however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves with brass bodies (chromium plated) incorporating a ceramic disc controlling the flow to the overhead shower using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating either a 2 way ceramic disc diverter (models T43014, T44014 & T45004) controlling the flow to either an overhead shower or shower handset with various operating members (See model) or a quarter turn ceramic disc headwork (models T43014B, T43034 & T44014B) with various operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
Shower kit consisting of a wall mounted thermostatic blending valve with a brass body (chrome plated), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset & riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Shower kit consisting of a wall mounted thermostatic blending valve with a brass body (chrome plated), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset, riser rail & soap tray. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Shower kit consisting of a wall mounted (concealed or exposed) thermostatic blending valve with a brass body (chrome plated). Flow is controlled by a quarter turn ceramic disc headwork with single lever operating member, temperature is controlled by a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset, riser rail & soap tray. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Shower kit consisting of a wall mounted (concealed or exposed) thermostatic blending valve with a brass body (chrome plated). Flow is controlled by a quarter turn ceramic disc headwork with single lever operating member, temperature is controlled by a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset & riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Shower kit consisting of a wall mounted thermostatic blending valve with a brass body (chrome plated), incorporating quarter turn ceramic disc headwork which controls the flow with dome operating members, temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporate a manual override button.. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset, riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted (vertical) thermostatic blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. The inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of two hole wall mounted thermostatic bar type mixing valves with a chrome plated brass body, incorporating a quarter turn ceramic disc headwork with dome type operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic blending valves with chrome plated brass bodies and ceramic disc headwork with a dome type operating member. Temperature is controlled independently via a thermostatis cartridge also with a dome type operating member. Inlets incorporate single check valve cartridges however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Supplied with a shower, hose, handset and rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted exposed bar type thermostatic blending valve (chromium plated brass) with a half turn ceramic disc headwork controlling the flow and a thermostatic cartridge controlling the temperature, both with cubed type operating members incorporating manual override buttons. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60.0°C
Shower kit consisting of a wall mounted thermostatic blending valve incorporating a brass body (chrome plated), quarter turn ceramic disc headwork controlling the flow, the temperature is controlled via a thermostatic cartridge which incorporates a manual override button and dome type operating members. Each inlet incorporates a combined EPDM washer with stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset, riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headworks controlling the flow, temperature is controlled via a thermostatic cartridge with dome type or cube type (model WCTS). All operating members incorporate a manual override button. Inlets incorporate approved single check valve cartridges (however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection) and stainless steel strainers. All products are supplied with a shower hose, shower handset, riser rail & soap tray. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of adjustable T type thermostatic blending valves (DZR brass) with push-fit connections for use with copper, PE-X (BS7921 Part 3: 2010) and Polybutylene (NBS7921/2) pipe. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range wall mounted exposed or concealed thermostatic shower valves having brass bodies (chromium plated) or chrome plated trim sets when concealed. Flow and temperature are controlled via a thermostatic cartridge with a dome type operating member. Models supplied with a hose, shower rail and handset (Miniduo EV, Miniduo BIV, Miniduo BIR with Eco Showerhead) Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Range of wall mounted, two-hole, thermostatic shower valves (chromium plated brass). In models X-KESCT, KESVAL, VISVAL, WISVAL, X-WCT & CTBV01 flow is controlled via a quarter turn ceramic disc headwork with dome or cube operating members. In models 269922, CTBV02, X205112CP, MCTS VO, X-CTBVEF, X-MCT & CTBV03 flow is controlled via a half turn ceramic disc headwork with dome or cube operating members. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Blending thermostatic valve incorporates a brass body and a thermostatic cartridge controlling the temperature. The inlets incorporate single check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating either a 2 way ceramic disc diverter (models T, SH103X) controlling the flow to either an overhead shower or shower handset with various operating members (See model) or a quarter turn ceramic disc headwork (models VM90, & VM93) with various operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
Wall mounted, thermostatic blending valve shower valve with brass body, incorporating a ceramic disc headwork with dome or cubed type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome or cubed type operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Thermostatic blending valve with brass body (various finishes), incorporating two push cartridges to control the water to the 2 outlets independently. The temperature is controlled also controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower blending valves (brass) incorporating quarter turn ceramic disc headworks controlling the flow with single lever/cross/dome operating members. Model 3551197090 has one headwork controlling the flow to a single outlet. Models 355249790 & 3552197090 have two headworks independently controlling the flow to two outlets. Model 3553497090 has three headworks independently controlling the flow to three outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
T-type thermostatic mixing valve with brass body, EPDM ‘O’-rings and stainless-steel strainers. The inlets incorporate stainless-steel strainers and an approved check valve cartridge verified by test (as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of thermostatic mixing valves incorporating brass bodies (chrome plated). The flow is controlled by quarter turn ceramic disc headwork, with dome or cube type operating members, which also diverts the flow between multiple shower outlets. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. The products are supplied with a shower hose, shower handset and overhead shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of two way and three way concealed thermostatic shower valves, incorporating brass bodies and ceramic disc headwork with dome type operating members which controls the flow and diverts to various shower outlets. Temperature is controlled by a thermostatic cartridge incorporating a manual over ride button. Inlets incorporate stainless steel filters and an approved single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic mixing valves, incorporating quarter turn ceramic disc headworks, with dome type operating members, controlling the flow to multiple shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporates stainless steel strainers an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, bar type thermostatic shower valves (chromium plated brass), incorporating a ceramic disc headwork which controls and diverts the flow between two outlets (shower to shower) and off position with a cube type operating member (model C76086-05 ) or dome type operating member (model C26037-03). The temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button (model C76086-05 ) or dome type operating member incorporating a manual override button (model C26037-03). Both inlets incorporate stainless steel filters and a single check valve cartridge however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The valves are supplied with a shower hose, shower handset and fixed overhead shower rose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, bar type thermostatic shower mixers (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. Both inlets incorporate a stainless steel strainer and a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of 1, 2 or 3 outlet concealed wall mounted bar type thermostatic mixer valve (various finishes) incorporating a quarter turn ceramic disc headwork controlling the flow using a single lever or cross top operating member depending on the model type. The temperature is controlled independently via a thermostatic cartridge also using a cross top or single lever type operating member (Depending on model). Inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. some models are supplied with a shower handset and hose. Maximum working pressure 5.0 bar. Maximum operating temperature 65.0°C
Range of thermostatic mixing valves with between 1 and 6 outlets. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Models Mira Activate 1.1903.091, 1.1903.092 & 1.1903.093 incoporate a built-in pump which is set 12 litres per minute. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves have a maximum working pressure of 1.0 bar. Maximum operating temperature 50°C.
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headworks controlling the flow. Temperature is controlled via a thermostatic cartridge with single lever type operating members which incorporate manual override buttons. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, thermostatic shower valve with brass body, incorporating half turn ceramic disc headworks controlling and diverting the flow, the temperature is controlled independently via a thermostatic cartridge, with dome type operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and overhead shower. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, concealed, thermostatic shower valve with brass body. Incorporating a quarter turn ceramic disc headwork which controls the flow, temperature is controlled independently via a thermostatic cartridge with cube type operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, concealed, thermostatic shower valve with brass body, incorporating half turn ceramic disc headworks controlling and diverting the flow, the temperature is controlled independently via a thermostatic cartridge, with single lever operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and overhead shower. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, concealed, thermostatic shower valve with brass body. Incorporating a quarter turn ceramic disc headwork which controls the flow, temperature is controlled independently via a thermostatic cartridge with lever type operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating quarter turn ceramic disc headwork controlling the flow with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating member and manual override button. Both inlets incorporate stainless steel strainers and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic mixing valves (chromium plated brass), flow is controlled via a quarter turn ceramic disc headwork with dome type operating members. The temperature is controlled by a thermostatic cartridge with dome type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of thermostatic mixing valves incorporating brass bodies (various finishes). Flow is controlled via a detent headworks and depending on model can be either a 2 or 3 headwork option supplying shower or bath outlets. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate a plastic strainer and a single check valve cartridge (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of ‘right hand’ or ‘left hand’ tempering valves having a plastic body incorporating a thermostatic element. The cold inlet incorporates a single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic mixers incorporating a brass body (chromium plated) and ceramic disc headwork with dome type operating members The temperature is controlled independently via a thermostatic cartridge with dome type operating member and manual override button. Both inlets incorporate a stainless steel strainers and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Model 1.1900.018 is supplied with a shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted thermostatic mixers incorporating brass body (chromium plated) and ceramic disc headwork with dome type operating members The temperature is controlled independently via a thermostatic cartridge with dome type operating member and manual override button. Both inlets incorporate a stainless steel strainers and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a shower hose, shower handset and shower rail. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Range of wall mounted thermostatic shower valves incorporating chrome plated brass bodies. Product is supplied with a shower hose, handset and riser rail and over head shower. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Wall mounted, exposed, thermostatic bar type shower mixing valve (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a dome type operating member, which controls the flow to a top mounted outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a combined NBR washer and stainless steel strainer and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
T-type thermostatic mixing valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets of model MT753CP-ISO also incorporate an isolation valve, Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted thermostatic bar type shower valve incorporating a ceramic cartridge headwork, with single lever operating member, which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member which incorporates a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
3 outlet concealed wall mounted thermostatic mixer valve incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65.0°C
Range of concealed thermostatic mixing valves with brass bodies and exposed trim sets (various finishes). Incorporating a ceramic disc headwork controlling and diverting the flow between shower outlets and an independent thermostatic cartridge controlling the temperature. The inlet incorporates a single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower valves with brass bodies and various trim plates (see model). V-BOX Therm. 2 way Shower Mixers incorporate a 2-way ceramic disc diverters/headworks (2 on, 1 off) controlling the flow with a single lever operating member. V-BOX Therm. 1 way Shower Mixers incorporate a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member which incorporates a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Non-metallic materials and components comply with BS6920 at 60°C
Thermostatic mixing valve with a brass body within a plastic outer case. Flow is controlled via an electronically operated ceramic cartridge via a motor. Temperature is controlled via a temperature sensor that electronically adjusts the ceramic cartridge via a motor. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower valves (chromium plated brass) incorporating a 2-way ceramic disc diverter headwork controlling the flow between an overhead shower outlet or a shower handset with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge with dome or cube type operating member that also incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted concealed thermostatic shower valves with DZR brass (F4000/HF concealed part) or brass bodies. Flow is controlled by either a 3-way (2 on, 1 off) or 4-way (3 on, 1 off) ceramic disc shower to shower diverter headwork (see model) with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valves with brass bodies (chromium plated) incorporating a ½ turn ceramic disc controlling the flow to the handshower or overhead shower using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate stainless steel strainers and single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted thermostatic shower valves with brass bodies (chromium plated) incorporating a ½ turn ceramic disc controlling the flow to the handshower. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower mixer incorporating a chromium plated brass body and ceramic disc headwork with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which has a manual override button. The inlets incorporate a single check valve cartridge (however the complete assembly has not been tested to demonstrate they provide adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.
Range of bar type thermostatic mixing valves. Flow is controlled via a quarter turn ceramic disc headwork using a dome type operating member. Temperature is controlled independently via a thermostatic mixing valve also using a dome type operating member. Inlets incorporate a single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted concealed thermostatic shower valves with DZR brass (CPHF4000HF concealed part) or brass bodies. Flow is controlled by either a 3-way (2 on, 1 off) or 4-way (3 on, 1 off) ceramic disc shower to shower diverter headwork (see model) with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
Range of wall mounted concealed thermostatic shower valves (chromium plated) incorporating a manual diverter and quarter turn ceramic disc headwork which control the flow using either round or square operating members. Temperature is controlled independently via a thermostatic cartridge also using either cross top, cubed, dome type or single lever operating members. Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
Range of concealed thermostatic blending valves with brass bodies and trim sets (various finishes - see model). The temperature is controlled via a thermostatic cartridge with a dome type or single lever operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Adjustable T-type thermostatic mixing valve (chromium plated brass). Each inlet incorporates a stainless-steel strainer and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.
Range of wall mounted, thermostatic blending valves with brass bodies (various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member which incorporates a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with chrome plated DZR brass body, EPDM’O’-rings and NBR/fibre galsets (except for 252100 CST model). Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.
Range of wall mounted thermostatic bar type mixing valves incorporating chrome plated brass bodies, ceramic disc headwork with dome type operating members controlling the flow. The temperature is independently controlled by a thermostatic cartridge with dome type operating member which incorporates a manual override button.The inlets incorporate stainless-steel strainers and an approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower valves (chromium plated or matt black coated brass) incorporating a manual diverter and quarter turn ceramic disc headwork controlling the flow between an overhead shower outlet or a shower handset with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that also incorporates a manual override button. Models 801540 FF and 801540 FF MBK1 are also supplied with Fast Fit connections Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Wall mounted, concealed thermostatic shower valve incorporating quarter turn ceramic disc headwork with dome type operating members controlling the flow to multiple shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves, riser rail, shower handset, shower hose and overhead shower outlet. The valve incorporates a brass body (various finishes) and ceramic disc headwork with dome type operating member which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate stainless steel filters and a single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies (various finishes, operating members and trim kits) Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass bodies), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C
Wall mounted thermostatic shower valve (chromium plated brass bodies), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C.
Wall mounted thermostatic shower valve (chromium plated brass bodies), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with cube type operating member. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C.
Wall mounted thermostatic shower valve (chromium plated brass bodies), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with cube type operating member. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C.
T-type thermostatic mixing valves with a brushed chrome plated brass body and EPDM `O`-rings incorporating a thermostatic cartridge controlling the temperature with a manual override button. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The F061 & 081 prefix models incorporate a 2-way ceramic disc diverter headwork with dome (F06 prefix models) or cubed type (F08 prefix models) operating members controlling the flow either shower outlet. The F062 & 082 prefix models incorporate a ¼ turn ceramic disc headwork with dome (F06 prefix models) or cubed type (F08 prefix models) operating members controlling the flow to a single shower outlet. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, exposed, thermostatic bar type shower mixing valve (chromium plated brass) incorporating a 2-way ceramic disc diverter headwork with a dome type operating member, which diverts the flow between outlets. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a combined NBR washer and stainless steel strainer and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valves with a chromium plated brass body incorporating a spindle headwork controlling the flow and a separate thermostatic cartridge controlling the temperature, both using single lever operating members. Both inlets incorporate flow regulators, strainers and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with shower hose, shower handset and riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, thermostatic blending valves with brass bodies (chrome plated), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type or single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type or single lever operating member which incorporates a manual override button. The inlets incorporate a combined NBR washer and stainless strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
‘Ausimix’ compact range of ‘T’-type thermostatic blending valves with nickel plated DZR brass bodies. Each inlet incorporates a stainless-steel strainer and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The SBHEAT110780, SBHEAT110785, HEAT110780 & HEAT110785 models also have angled isolation valves at both inlets. Maximum working pressures and operating temperatures: Existing push fit models: For use with PEX pipe (manufactured to BS7291 part 3) and Polybutylene pipe (manufactured to BS7291 part 2): 12.0 bar, cold water use only. 6.0 bar @ 95°C. For use with copper pipe: Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. Compression models added October 2023: For use with copper pipe to BSEN1057:2006: Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, thermostatic, shower mixers incorporating brass bodies (various finishes) 2-way ceramic disc diverter headwork to control the flow between two shower outlets with various operating members (see model). The A47203VUK model uses two ‘detent’ (push to on push to off) headworks to control the flow to each outlet. Temperature is controlled independently via a thermostatic cartridge using various operating members (see model) that also incorporates a manual override button. The inlets incorporate a combined EPDM washer and stainless-steel strainer or stainless steel strainer (A47203VUK model) and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet of the overhead shower incorporates a combined EPDM washer and stainless-steel strainer. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The product is supplied with dome type operating members. The inlets incorporate a stainless steel strainer and single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic shower mixing valves with brass bodies (various finishes - see model) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a combined NBR washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Flow control valve incorporating a ceramic cartridge headwork fitted within a chrome plated brass body and a single lever operating member. Product is supplied with a Stainless steel braided PEX lined hose assembly that connects to the outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves with brass bodies (various finishes). Incorporating ceramic disc headwork with a dome type operating member which also divertes the flow between an over head shower and a shower handset. The temperature is controlled independently via a thermostatic cartridge and dome type operating member with a manual override button.The inlets incorporate a single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection) and a filter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves, riser rail, shower handset, shower hose and overhead shower outlet. The valve incorporates a brass body (various finishes) and ceramic disc headwork with dome type operating member which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate stainless steel filters and a single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The DC3002 & DC3007 prefix models incorporate a 2-way ceramic disc diverter headwork with dome (DC3001 models) or cubed type (DC3006 & DC3007 models) operating members controlling the flow either shower outlet. The DC3001 model incorporate a ¼ turn ceramic disc headwork with dome (DC3001 & DC3002 models) or cubed type (DC3006 & DC3007 models) operating members controlling the flow to a single shower outlet. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, thermostatic shower valve (chromium plated brass). The flow is controlled by a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled by a thermostatic cartridge with dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a stainless steel braided, PVC lined shower hose, chrome plated plastic shower handset and riser rail. The inlet of the shower handset incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
Range of wall mounted, concealed thermostatic blending valves incorporating brass bodies and various head works. 86005700 model x1 ¼ turn ceramic disc headwork controlling the flow. 86005740 model x1 manual diverter controlling the flow. All models have an independent thermostatic cartridge controlling the temperature with a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Wall mounted, thermostatic shower blending valves with brass bodies (enclosed within a white and chrome plated case), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The product also incorporates three ‘detent’ (push to on push to off) diverters, controlling the flow to the shower handset or overhead shower, (which has two outlet patterns). The product is supplied with a shower riser, overhead shower outlet, shower hose and handset. The inlets incorporate a combined EPDM washer and stainless strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed thermostatic shower valve (chromium plated brass) incorporating a thermostatic cartridge that controls the temperature and a shut off valve that controls the flow both with a single lever operating member. The inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, bar type, thermostatic shower mixer (chromium plated brass), incorporating a ½ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The TR10032CP model is supplied with a riser rail, shower hose and handset. The TR10010CP is the valve only. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The B36264 model incorporates a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The B38130 model incorporates a quarter turn ceramic disc headwork with a dome type operating member controlling the flow to a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Both products are supplied with a shower hose and handset, the B36264 model also includes a shower riser to an overhead shower outlet. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic shower blending valves (chromium plated brass) with one or two outlets (see model). Flow is controlled by one or two quarter turn ceramic disc headwork with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a.cross top operating member. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies and trim sets (various finishes). The temperature is controlled via a thermostatic cartridge with a cross top or single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, bar type thermostatic shower mixers (chromium plated brass) with a 2-way ceramic disc diverter controlling the flow to either shower outlet. Temperature is controlled independently via a thermostatic cartridge which incorporates a manual override button. The S06 model has dome type operating members and the S15-2 model has cube type operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed, thermostatic mixing vales with brass bodies and chrome plated trim sets, incorporating one or two quarter turn ceramic disc headworks with various operating members (see models). Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork (with various operating members). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
Range of water filters cartridges with plastic bodies and either carbon block or activated carbon filter media. Maximum working pressure 8.6 bar. Maximum operating temperature 38°C.
Wall mounted exposed thermostatic shower valve incorporating a brass body (various finishes), quarter turn ceramic disc headwork with single lever operating members and manual diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge with cross top type operating member. The inlets incorporate a single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). The product is supplied with an overhead shower, shower handset, riser rail and shower hose. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chrome plated) brass bodies incorporating a single sequential thermostatic cartridge controlling both flow and temperature. Models 86005770 & 86005780 have single lever operating members. Model 86005760 is not supplied with an operating member. both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic shower valves incorporating brass bodies (chrome plated) and a quarter turn ceramic disc headwork controlling the flow with single lever, cross top or dome type operating members. The temperature controlled is independently via a thermostatic cartridge incorporating a manual override button with cross top, dome type or single lever operating members. Both inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic bar shower valve, riser rail, shower handset, shower hose and overhead shower outlet. The valve incorporates a brass body (chrome plated) and ceramic disc headwork with dome type operating member which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate stainless steel filters and a single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Thermostatic cartridge with brass body, and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic mixing valves with a brushed Zinc alloy plated brass body (various operating members) and NBR `O`-rings incorporating a thermostatic cartridge controlling the temperature with a manual override button, a ceramic disc headwork controlling the flow. Both inlets incorporate a single check valve cartridge, (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic blending valve (chrome plated brass) incorporating a quarter turn ceramic disc headwork with dome type operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature is 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves incorporating stainless steel bodies, a 2-way ceramic disc headwork and a single lever operating member controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a single lever incorporating a manual override operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic blending valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The246PG model incorporates a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The 536PG model incorporates a quarter turn ceramic disc headwork with a dome type operating member controlling the flow to a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Both products are supplied with a shower hose and handset, the B36264 model also includes a shower riser to an overhead shower outlet. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ceramic disc headworks, the top outlet is controlled by a ¼ turn ceramic disc, the bottom outlets are controlled by a 2 way shower to shower ceramic disc diverter headwork. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome, single lever, cross top or cube type operating members. The inlets each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, exposed, thermostatic shower mixing valves with brass bodies (various finishes - see model) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a combined NBR washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of adjustable T-type thermostatic mixing valves with brass bodies (chrome plated). Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
T-type mixing valve with a DZR brass body (nickel plated), temperature is controlled by a thermostatic cartridge. Each inlet incorporates a combined EPDM washer and stainless steel strainer, and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe manufactured to EN1057. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T-type mixing valve with a DZR brass body (nickel plated), temperature is controlled by a thermostatic cartridge. For use with copper pipe manufactured to EN1057. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, bar type, thermostatic shower blending valves (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic shower valves with brass bodies and trim sets (various finishes - see models). Flow is controlled as follows (for operating members - see model): Single outlet models: ¼ turn ceramic disc headwork. Double Outlet Models without diverter: ¼ turn ceramic disc headworks. Double Outlet Models with diverter: 2-way ceramic disc diverter headwork. Triple Outlet Models with diverter: ¼ turn ceramic disc headwork and a 2-way ceramic disc diverter headwork. The temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. The inlets incorporate a single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Specific models are supplied with a shower hose and handset (see models). Maximum working pressure 5.0 Bar Maximum operating temperature 60°C
Wall mounted bar type thermostatic mixing valve (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member and a secondary ceramic disc headwork diverting the flow between the overhead shower and hand shower with a single lever operating member. The temperature is controlled independently via a thermostatic mixing cartridge with a dome type operating member that incorporates a manual override button. Both inlets incorporate single check valve cartridges, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The product is supplied with a fixed overhead shower, shower handset and hose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed thermostatic shower valve (chromium plated brass) incorporating a thermostatic cartridge that controls the temperature and a shut off valve that controls the flow both with a single lever operating member. The inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic shower valve (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork with single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a cross-top operating member that incorporates a manual override button. The product is supplied with a shower rail and overhead shower. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Wall mounted, bar type, thermostatic shower blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted bar type thermostatic shower valve, with a ceramic cartridge headwork controlling the flow between overhead shower and handset with a dome type operating member incorporating a manual override button. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a strainer and a single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Supplied with hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Concealed, thermostatic shower blending valve, incorporating a brass body and a (chrome plated) functional trim set. The functional trim set comprises of two detent headworks (push to on, push to off) as the main flow control for each shower outlet, a ¼ turn ceramic disc valve with a dome type operating member controlling the flow volume, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The functional trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. These assemblies are to be inserted into the concealed body. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed, thermostatic shower blending valves, incorporating a brass body and a (chrome plated) functional trim set. The functional trim set comprises of a quarter turn ceramic disc headwork, or a 2 or 3 way ceramic disc diverter headwork (see model) with a dome type operating member controlling the flow, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The functional trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Concealed, thermostatic shower blending valve, incorporating a brass body and a (chrome plated) functional trim set. The functional trim set comprises of a 2 way ceramic disc diverter headwork with a dome type operating member controlling the flow, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The functional trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower panels. Model TFP3001 incorporates a single sequential headwork which controls the flow and temperature using a single lever operating member with an addtional self-closing headwork with dome type operating member which also controls the flow to a fixed shower head. Model TFP3002 incorporates a single sequential headwork which controls the flow and temperature using a single lever operating member to a fixed riser rail shower hose and handset. Model TFP3003 incorporates a self-closing headwork which controls the flow using a dome type operating member to a fixed shower outlet, temperature is pre-set using a thermostatic valve. The inlets on all models incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with stainless steel strainers, flow restrictors and isolation valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Thermostatic blending valve (chromium plated brass), the valve body inlets incorporate single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with stainless steel strainers and inlet connections that incorporate screw driver operated spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies and trim sets (chrome plated). Incorporating a thermostatic cartridge headwork with cubed or dome type operating members. The inlets incorporate a flow regulator and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic blending valves with brass bodies (chrome plated), incorporating a manual diverter to two outlets with an off position (model XB-AZ-037A), two ceramic disc headworks controlling the flow to both outlets (model XB-AZ-035A) or one outlet controlled via a ceramic disc headwork (model XB-AZ-034A). The temperature is controlled via a thermostatic cartridge with various operating members (see models). Inlets incorporate stainless-steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, bar-type thermostatic shower valves with brass bodies (chromium plated), incorporating a quarter ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which incorporates a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted concealed thermostatic blending valves incorporating brass bodies with chrome plated trim sets, incorporating 1,2 or 3 way diverter valves (see models) controlling the flow with a single lever type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of T-Type thermostatic mixing valves incoporating a brass body and a thermostatic cartridge controlling the temperature. The 15mm & 22mm compression models are for use with copper pipe manufactured to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic shower blending valves incorporating brass bodies and an external trim set (various finishes). Flow is controlled to each shower outlet via individual ‘detent’ (push to on push to off) headworks. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, shower handset, riser rail and overhead shower outlet. The product is also supplied with two loose plastic flow regulators for installation between the valve and the shower hose, as well as on the inlet to the overhead shower. Maximum working pressure 5.0 bar. Maximum operating temperatures: shower handset 50°C, all other items 65°C.
Range of wall mounted, thermostatic, shower mixers incorporating brass bodies (various finishes) 2-way ceramic disc diverter headwork to control the flow between two shower outlets with various operating members (see model). The A47203VUK model uses two ‘detent’ (push to on push to off) headworks to control the flow to each outlet. Temperature is controlled independently via a thermostatic cartridge using various operating members (see model) that also incorporates a manual override button. The inlets incorporate a combined EPDM washer and stainless-steel strainer or stainless steel strainer (A47203VUK model) and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet of the overhead shower incorporates a combined EPDM washer and stainless-steel strainer. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Wall mounted thermostatic blending valves (chromium plated brass), incorporating ceramic disc headwork with a dome type operating member and a manual diverter which diverts the flow between an over head shower and a bath. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature is 60°C.
Range of thermostatic blending valves with brass bodies, EPDM ‘O’-rings and chromium plated dome type operating members. The inlets incorporate plastic strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower blending valves, with a brass body (various finishes - see model), incorporating a thermostatic cartridge controlling the temperature with various operating members (see model). Both inlets incorporate a combined EPDM washer with a stainless steel strainer and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, bar type thermostatic shower mixer (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member. The outlet incorporates a single check valve cartridge assembly; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet connections incorporate an eccentric isolation valve and flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed or exposed thermostatic shower valves (chromium plated brass), incorporating a single sequential headwork controlling both flow and temperature via a single lever operating member. Each inlet elbow incorporates a combined TPE washer and stainless-steel strainer. The main valve body inlets each incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of electronic, thermostatic mixing valves which incorporate a solenoid valve on the inlet and various outlet configurations dependant on model. All models are supplied with a user interface that controls flow and temperature. The inlets of models 1.1503.678, 1.1503.682, 1.1503.690, 1.1503.698 & 1.1621.099 incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Model 1.1503.702 – Rada Sense W KIT T3 Washbasin is supplied with a wall mounted spout outlet. Model 1.1503.706 – Rada Sense S KIT T3 Shower is supplied with a fixed shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic bar shower valves incorporating a thermostatic cartridge controlling the temperature with a dome operating member incorporating a manual override button. The flow to the handset or overhead shower is via a ceramic disc headwork with a dome operating member. Inlets Incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. RRK models are also supplied with shower hose, handset, overhead shower head and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65ºC.
A range of wall mounted thermostatic blending valves with brass bodies (various finishes). The temperature is controlled via a thermostatic cartridge and dome operating member and flow is controlled via a quarter turn ceramic headwork. Product can come with one, two or three push type cartridges that divert the flow to various outlets (see model) The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum working temperature 60°C.
Range of concealed thermostatic shower valves with brass bodies incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlet model VQ20 incorporates a single shower outlet (x1 headwork) and model VQ21 incorporates a double shower outlet (x2 headworks). The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted bar type thermostatic shower mixers with brass bodies (various finishes), incorporating a ceramic disc headwork which controls and diverts the flow to a hand shower or overhead shower using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with an overhead shower, shower hose and shower handset. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 60ºC.
Range of T type thermostatic blending valves with (nickel plated) DZR brass bodies. The inlets incorporate a stainless-steel strainer and single check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2) Models HEAT160030 & HEAT160035 also incorporate a servicing valve at the inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 7 bar. Maximum working temperature 65°C.
Range of wall mounted concealed thermostatic shower valves (brass body) incorporating a quarter turn ceramic disc headworks controlling the flow with a range of single lever, dome or hand wheel operating members. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model are available in various configurations, please see model. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic blending valves with brass bodies (chrome plated), incorporating two way diverter valves controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°.
Wall mounted thermostatic shower valves (Chrome plated) brass body. Incorporating a ceramic cartridge headwork controlling the flow to the overhead shower and shower handset using a dome type operating member. The temperature is controlled via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate stainless steel strainers, screwdriver operated spherical valves and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product includes, a riser rail, shower head with a stainless-steel strainer at the inlet, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valves (Chrome plated) brass body. Incorporating a ceramic cartridge headwork controlling the flow to the overhead shower and shower handset using a cube type operating member. The temperature is controlled via a thermostatic cartridge with a cube type operating member incorporating a manual override button. The inlets incorporate stainless steel strainers, screwdriver operated spherical valves and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product includes, a riser rail, shower head with a stainless-steel strainer at the inlet, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 7 bar. Maximum working temperature 65°C.
Range of concealed thermostatic shower valves with brass bodies incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlet model VV135-IS incorporates a single shower outlet (x1 headwork) and model V134-IS incorporates a double shower outlet (x2 headworks). The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of concealed, wall mounted, thermostatic mixer valves with brass bodies (various finishes) with 1 - 6 outlets. Flow is controlled to each outlet by ‘detent’ (push to on push to off) headworks. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate a combined plastic washer and stainless steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model SL-T50004BW has a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 6.0 bar. Maximum operating temperature is 85°C.
Range of wall mounted, exposed bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome operating member and manual override button. The temperature is controlled by a thermostatic cartridge with dome type operating member and manual override button. Both inlets incorporate a stainless-steel strainer and single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted exposed thermostatic blending valve (chromium plated brass). Incorporating a thermostatic cartridge which controls both flow and temperature independently with a single lever (flow) and cross top or single lever (temperature) operating members. The flow control incorporates a manual override button. The inlets incorporate stainless steel strainers and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members, model (34458892) is supplied with cross-top operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet to the overhead shower incorporates a stainless steel strainers and flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves with brass bodies (various finishes), incorporating a quarter ceramic disc headwork controlling the flow with dome type operating member. Temperature is controlled via a thermostatic cartridge with dome type operating member incorporating a manual override button and a push button manual diverter to shower outlet. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome or cube operating member incorporating a manual override button. The temperature is controlled by a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome or cube operating member incorporating a manual override button. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a lever operating member. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate an eccentric isolation valve, a stainless-steel strainer and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides back flow protection. The shower outlet connection on the main valve incorporates a flow restrictor (H9741 model only). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
Wall mounted thermostatic shower valves (Chrome plated) brass body. Incorporating a quarter turn ceramic disc headwork controlling the flow to the shower handset using a cubed type operating member. The temperature is controlled via a thermostatic cartridge with a cube type operating member incorporating a manual override button. The inlets incorporate stainless steel strainers, screwdriver operated spherical valves and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product includes, a riser rail, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, bar type, thermostatic shower mixers (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with a dome type or single lever operating member (see model) controlling the flow between each shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type or single lever operating member (see model) incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. All models, except the X-KCTD model are supplied with an overhead shower rose. All products are supplied with a shower hose. All models are supplied with a shower handset, except for the X- prefix models. The following models incorporate additional items on the inlets to the overhead shower or shower handset: KCTSDEF, KCTSDEFMH: Overhead shower and shower handset with a stainless steel strainer and flow restrictor on the inlet. AOSCTSDEF, SJKRDS01CP & SJKRDS01BK: Overhead shower with a stainless steel strainer and flow restrictor on the inlet, shower handset with a plastic flow regulator on the inlet. AOKCTSDEF, RUDCTSDEF: Shower handset with a plastic flow regulator on the inlet. DCTWDEF: Overhead shower with a plastic flow regulator and a combined EPDM washer and stainless steel strainer on the inlet, shower handset with a plastic flow regulator on the inlet. KHCTADEF, KRCTADEF, ASCTADEF: Overhead shower and shower handset with a plastic flow regulator on the inlet. X-ASCTADEF: Overhead shower with a plastic flow regulator on the inlet. X-AOSCTSDEF: Overhead shower with a stainless steel strainer and flow restrictor on the inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
A range either concealed or exposed wall mounted thermostatic mixing valves with brass bodies (exposed models are chromium plated). Models F3004, F2301, F2304, F2303 incorporate ¼ turn ceramic disc headworks. Model F2304, F2092, F2302 incorporate a manual diverter with a shut off. All models incorporate a thermostatic cartridge that controls the temperature, expect model F3002 that incorporates a combined shut off a thermostatic cartridge with single lever operating members. Model F3004 has a single lever operating member for the headwork and a cross top operating member for the thermostatic cartridge. The inlets of all models expect F3004 incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 60°C.
Range of concealed thermostatic mixing valves, incorporating quarter turn ceramic disc headworks, with dome type operating members, controlling the flow to multiple shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporates stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model 65036+54073 supplied with a shower handset and hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted, thermostatic shower valve (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork with single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a cross-top operating member that incorporates a manual override button. The product is supplied with a shower rail and overhead shower. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Wall mounted, concealed, thermostatic blending valve with brass body and chrome plated trim set. Incorporating a thermostatic cartridge headwork with dome type operating member incorporating a manual override button. The valve is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of wall mounted, thermostatic, shower mixers incorporating brass bodies (various finishes) 2-way ceramic disc diverter headwork to control the flow between two shower outlets with various operating members (see model). Temperature is controlled independently via a thermostatic cartridge using various operating members (see model) that also incorporates a manual override button. The inlets incorporate a combined EPDM washer and stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet of the overhead shower incorporates a combined EPDM washer and stainless-steel strainer. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Concealed, thermostatic shower blending valve, incorporating a brass body and a (chrome plated) trim set. The trim set comprises of a 2 way ceramic disc diverter headwork with a dome type operating member controlling the flow, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection.. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted exposed thermostatic mixing valves with brass bodies (various finishes). Incorporating a ceramic disc headwork with single lever operating member controlling the flow of the outlet on the bottom of the valve and three push button cartridges, two control the flow to outlets at the rear of the valve, and one to the outlet on the bottom of the valve all with cube type operating members. The temperature is controlled independently via thermostatic cartridge with a dome type operating member with a manual override button. The inlets and outlet at the bottom of the valve incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum working temperature 65°C.
Range of wall mounted exposed thermostatic mixing valves with brass bodies (various finishes). Incorporating a ceramic disc headwork with a single lever operating member controlling the flow to a hose outlet and then two push button cartridges, one controls the flow to an outlet at the rear of the valve and the other to the outlet on the bottom of the valve with cube type operating members. The temperature is controlled independently via thermostatic cartridge with a dome type operating member with a manual override button. The inlets and outlet at the bottom of the valve incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum working temperature 65°C.
Wall mounted, exposed thermostatic shower valve (brass body, various finishes) incorporating a non-rising spindle headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member which incorporates a manual override button. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, bar type thermostatic shower mixers (various finishes). Incorporating a quarter turn ceramic disc headwork controlling the flow to the outlet with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with a manual override button. Both inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.
Range of concealed, wall mounted thermostatic blending valves (cast brass bodies). All models incorporate a thermostatic cartridge to control the temperature. GOO.5500AE/W/A00 model has a top outlet with a 2 way diverter controlling the flow. GOO.5600AE/W/A00 model has a top outlet with a 3 way diverter controlling the flow. GOO.5540AE/W/A00 model has a top outlet with a 2 way diverter and a bottom outlet with a quarter turn ceramic disc headwork controlling the flow. GOO.5200AE/W/A00 model is just a thermostatic cartridge (no flow control). GOO.5300AE/W/A00 model has a top outlet with a quarter turn ceramic disc headwork controlling the flow. GOO.5300AE/W/A00 model has a top and bottom outlet both with a quarter turn ceramic disc headwork controlling the flow inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic mixing valve (chromium plated brass body), the flow is controlled by a non-rising spindle headwork with a dome operating member and the temperature is controlled independently via a thermostatic cartridge with a dome operating member and manual override button Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 55°C.
Range of wall mounted (concealed) thermostatic shower mixers (brass bodies), incorporating half turn ceramic disc headworks controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome operating member and manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower arm, overhead shower, shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. The inlets incorporate a stainless-steel strainer and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10 Bar Maximum operating temperature 90°C
Range of wall mounted concealed thermostatic mixing valves with brass bodies. Flow is controlled by either a 2-way combined shut off/diverter cartridge or a ceramic disc headwork with various operating member (see models). The temperature is controlled independently via a thermostatic cartridge with a various operating member that also incorporates a manual override button. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass), incorporating a single sequential headwork controlling both flow and temperature using a single lever operating member. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valve (chrome plated brass), incorporating a non-rising spindle headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted, thermostatic shower valve with chromium plated brass body. Flow is controlled by a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, handset, and riser rail. Maximum working pressure 10.0 Bar Maximum operating temperature 70°C.
Three-hole deck mounted thermostatic blending valve with brass body (chromium plated brass) incorporating a ceramic cartridge headworks with single lever operating members and a lockable self-cancelling diverter to shower outlet. The inlet to the shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum working temperature 60°C
Range of wall mounted thermostatic shower valves (chrome plated brass bodies) incorporating a two-way diverter valve controlling the flow between shower outlets with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic blending valve (chromium plated brass incorporating a quarter turn ceramic disc headwork. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted concealed thermostatic mixing valves with brass bodies. Flow is controlled by either a 2-way combined shut off/diverter cartridge or a ceramic disc headwork with various operating member (see models). The temperature is controlled independently via a thermostatic cartridge with a various operating member that also incorporates a manual override button. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower valves (chromium plated brass). The 86005130 model incorporates a 2-way ceramic disc diverter headwork with a cube operating member controlling the flow. All other models incorporate a ¼ turn ceramic disc headwork controlling the flow with either a dome or single lever operating member. The outlet of these models incorporates a manual diverter with a single lever operating member. Temperature for all models is controlled independently via a thermostatic cartridge with either a cube, dome or single lever operating member incorporating a manual override button. Each inlet incorporates a combined NBR washer and stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed thermostatic shower valves, brass bodies with either (chrome or matte black finishes), incorporating two-way diverter valves and quarter turn ceramic disc headworks controlling the flow with either single lever or cross-top operating members. The temperature is controlled independently via a thermostatic cartridge with either a cross-top or dome operating member, both incorporating a manual override button. The product incorporates a single check-valve cartridge assembly incorporating a stainless-steel strainer; however, the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Wall mounted concealed thermostatic shower valve, incorporating a two-way manual diverter controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override button. The product incorporates a single check valve cartridge assembly incorporating a stainless-steel strainer, however; the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Range of wall mounted thermostatic shower valves (chrome plated brass). Models PM2 CSHCVO C and N2 CSHCVO C incorporate a non-rising spindle headwork controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating member (PM2 CSHCVO) or a cross top operating member for (N2 CSHCVO C). Model PM2 SQSHCVO C incorporates a thermostatic cartridge that controls both flow and temperature with a single lever operating member. The inlets for all models incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 Bar Maximum operating temperature 65°C.
Range of T-type mixing valves incorporating a DZR brass body (brushed chrome plated) and thermostatic cartridge. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
RANGE OF THERMOSTATIC BLENDING VALVES INCORPORATING CHROME PLATED BRASS BODIES. THE INLET INCORPORATES A STAINLESS STEEL STRAINER AND AN APPROVED CHECK VALVE CARTRIDGE HOWEVER, THE COMPLETE PRODUCT HAS NOT BEEN FULLY TESTED TO DEMONSTRATE IT PROVIDES BACKFLOW PROTECTION. MODELS 09 415 IS SUPPLIED WITH A RIGID CONNECTION SET AND TEE PIECE AND MODEL 09 146 IS SUPPLIED WITH A PEX LINED FLEXIBLE HOSE AND TEE PIECE CONNECTION SET. MAXIMUM WORKING PRESSURE 10.0 BAR. MAXIMUM OPERATING TEMPERATURE 60°C.
Range of wall mounted (concealed) thermostatic mixing valves with brass bodies, incorporating half turn ceramic disc headworks controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome operating member and manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of thermostatic blending valves incorporating chrome plated brass bodies. The inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models 09 415 is supplied with a rigid connection set and tee piece and model 09 416 is supplied with a PEX lined flexible hose and tee piece connection set. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic blending valves (chromium plated DZR brass body). The inlets incorporate stainless steel strainers and an approved check valve cartridge which has been verified by test as suitable for backflow protection against Fluid Category 2. Compression models are for use with copper pipe manufactured to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic shower valves incorporating brass bodies (various finishes), self-cancelling diverter and self-closing headwork. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Models 1.1967.001, 1.1967.002, 1.1967.003 & 1.1967.004 are supplied with a shower hose, handset and riser rail and overhead shower. Models 1.1967.005, 1.1967.006, 1.1967.007 & 1.1967.008 are supplied with a shower hose, handset, riser rail & bath filler. Models 1.1967.009, 1.1967.010 & 1.1967.011 are supplied with a shower hose, handset and riser rail, overhead shower & bath filler. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of wall mounted thermostatic shower valves (chrome plated brass bodies) incorporating a two-way diverter valve controlling the flow between shower outlets with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic shower valves (chrome plated brass bodies) incorporating a two-way diverter valve controlling the flow between shower outlets with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of concealed thermostatic valves with thermostatic cartridges. Some models include diver between outlets. (See model codes) All models incorporate cube, dome, cross-top or single lever type operating members. The inlets incorporate stainless steel strainers and single check valve cartridges; however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic shower valves (chrome plated brass). Flow is controlled by a ceramic disc diverter cartridge, using dome type operating members. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which also incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted, thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a cross top operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. The product is supplied with a shower riser, overhead shower rose, shower hose and handset. The product incorporates a self-cancelling diverter on the shower riser. Each inlet incorporates a stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T type thermostatic blending valves with DZR brass bodies and EPDM O-rings. The inlets incorporate stainless steel strainers and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, thermostatic blending valves with chrome plated brass bodies. The temperature is controlled by a dome type operating member which controls the thermostatic cartridge and a wheel type operating member which controls the ceramic discs which in turn control the shower outlets. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. The product comes supplied with a shower hose and handset and overhead shower and riser. Maximum working pressure 10.0 bar Maximum operating temperature 65°C
A range of concealed thermostatic shower valves with trim sets in a variety of finishes (See models). Incorporating ¼ turn ceramic headworks with a single lever type operating member controlling the flow to all outlets and then push-button cartridges controlling the flow of the individual outlets. The temperature is controlled via a thermostatic cartridge with a single lever operating member with a manual override button. Hose and handset not supplied. The inlets of all models incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 70°C
Wall mounted thermostatic shower valve (chrome plated brass), incorporating a ceramic disc diverter cartridge controlling the flow from shower to shower with a cube operating member. The temperature is controlled independently via a thermostatic cartridge, with a cube operating member, that also incorporates a manual override button. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. The inlets incorporate approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection), chrome plated spherical ball valves and stainless-steel strainers with EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of exposed wall mounted thermostatic shower valves, (chrome plated brass bodies). Model (N2 CSHXTVO G) is gold plated, incorporating a spindle headworks controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with cross-top operating members. Model (PM2 CSHXTVO C) incorporates a spindle headwork controlling the flow with single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Model (N2 CSHXDIV C) is supplied with a riser rail, shower hose, shower handset and overhead shower. The riser rail also incorporates a shower-to-shower diverter valve assembly that also incorporates a single check vale cartridge (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Both inlets incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic shower valves (chrome plated brass), incorporating a thermostatic cartridge that controls both flow and temperature with single lever operating members. Model (N2 SQSHXDIV C & PM2 SQSHXDIV C) are supplied with a riser rail, shower hose, shower handset and overhead shower. The riser rail incorporates a shower-to-shower diverter assembly that also incorporates a single check vale cartridge (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Both inlets incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of T-type thermostatic blending valves with brushed chrome plated DZR brass bodies. The inlets incorporate stainless steel strainers and single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, bar type, thermostatic shower blending valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, shower riser rail and a shower handset. The shower handset incorporates a plastic flow regulator on the inlet. The shower hose includes two EPDM washers, one of which incorporates a stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature is 60°C.
Wall mounted, thermostatic shower valve (chromium plated brass body) incorporating a two-way diverter valve headwork that controls flow between each shower outlet with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member with a manual override button. Both inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 85°C.
Two-hole wall mounted thermostatic mixing valve (chrome plated brass body). Incorporating ceramic disc headwork, with a lever type operating member. The temperature is controlled independently via a thermostatic cartridge with a lever type operating member and manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C
Range of wall mounted, thermostatic blending valves (chrome plated brass bodies) incorporating quarter turn ceramic disc headwork with a single lever operating member. Temperature is independently controlled via a thermostatic cartridge with cross top operating members. Both inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic blending valves (chrome plated brass bodies) incorporating quarter turn ceramic disc headwork with a single lever operating member. Temperature is independently controlled via a thermostatic cartridge with cross top operating members. Both inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with dome operating member incorporating a manual override button. The temperature is controlled by a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic bar type shower valves with a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass bodies), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with cube type operating member. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C.
Wall mounted thermostatic bar type shower valves with a quarter turn ceramic disc headwork controlling the flow with a cubed operating member. The temperature is controlled independently via a thermostatic cartridge with a cubed operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted two hole, shower outlet thermostatic shower mixing valves (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork and temperature is independently controlled via a thermostatic cartridge with cross top, dome type or single lever operating members. Inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted, thermostatic blending valve shower valve with brass body, incorporating a ceramic disc headwork with dome or cubed type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome or cubed type operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted bar type thermostatic shower mixer (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow using a dome type member with a manual override button Temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Electronically controlled thermostatic shower mixing valve with a plastic body. Temperature is controlled via two motorised valves and a thermistor. The product also incorporates a pump and plastic filters on each inlet. Maximum working pressure 7.0 bar. Maximum working temperature 65°C.
Range of wall mounted, concealed, thermostatic shower valves with cast brass bodies, incorporating a ceramic cartridge headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic shower mixing valves (chromium plated brass). The products incorporate a ¼ turn ceramic disc or a 2-way ceramic disc diverter headwork (see model). Temperature is controlled independently via a thermostatic cartridge with a manual override button. The products have cube (81B, 81C, 90B and 90C suffix models) dome type (all other models) operating members. Models (GR-LY-13BK2 & GR-LY-13BK4) incorporate single lever operating members. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valve (matte black plated brass), incorporating a ceramic disc diverter valve controlling the flow and a thermostatic cartridge independently controlling the temperature incorporating a manual override button, both using cube type operating members. The inlets incorporate stainless steel strainers with EPDM O-rings and approved check valve cartridges; however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower handset, shower hose, overhead shower, and riser rail assembly. The shower hose and overhead shower incorporate stainless steel strainers with EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chrome plated brass). Flow is controlled by a ceramic disc diverter cartridge, using dome type operating members. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which also incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Electronically controlled thermostatic shower mixing valve with a plastic body. Temperature is controlled via two motorised valves and a thermistor. The product also incorporates a pump and plastic filters on each inlet. Maximum working pressure 7.0 bar. Maximum working temperature 65°C.
Wall mounted thermostatic shower valve (chromium plated brass bodies), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C.
Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Wall mounted, exposed, thermostatic shower mixing valve (chromium plated brass). The product incorporate a ¼ turn ceramic disc or a 2-way ceramic disc diverter headwork (see model). Temperature is controlled independently via a thermostatic cartridge with a manual override button. The product has a dome type operating member. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Wall mounted, bar type, thermostatic shower mixer (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between each shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The product is supplied with a shower hose (metal interlocked), shower handset (chrome plated), riser rail and overhead shower. The shower handset and the overhead shower both incorporate a stainless-steel strainer on the inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic shower mixing valves (chromium plated brass). The products incorporate a ¼ turn ceramic disc or a 2-way ceramic disc diverter headwork (see model). Temperature is controlled independently via a thermostatic cartridge with a manual override button. All models have cube operating members except model 706128 which has dome operating member. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic blending valve (chromium plated brass). Temperature is controlled via a thermostatic cartridge with a cube operating member incorporating a manual override and the flow is controlled via two push type cartridges for the shower outlets. The inlets incorporate stainless steel strainers and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower valves with brass bodies (various finishes), incorporating a thermostatic cartridge controlling the temperature and a push shut-off valve controlling the flow. The inlets and the shower outlet incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Wall mounted, manually operated blending valve with a brass body (various finishes) and ceramic cartridge headwork a single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C
Range of wall mounted, thermostatic shower valves with brass bodies (various finishes). Flow is controlled with a ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a single lever operating member with a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, manual blending valve (brass body, various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. This product is not claimed to provide any backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of thermostatic shower panels incorporating a single sequential thermostatic control valve with a single lever operating member and flexible riser kit. Each inlet supplied with a servicing valve, EPDM o-ring and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with black lined PVC shower hoses and chrome plated shower handsets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted concealed thermostatic blending valves with plastic bodies (various finished face plates). The flow is controlled by a ceramic disc diverter headworks with a cube type operating members. The temperature is controlled by a thermostatic cartridge with dome type operating members incorporating a manual override button. Both inlets incorporate an approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve with brass body (various finishes), incorporating a ceramic disc diverter that controlling the flow with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed (BIV & BIR models) and exposed (EV model) thermostatic shower control valves. The bodies are cast brass (concealed versions) with a chromium plated trim set or chromium plated brass (exposed versions). Flow and temperature are controlled by a thermostatic cartridge with a single lever operating member. The inlets incorpoarate stainless steel strainers. Some models are supplied with a shower hose and handset or an overhead shower arm and shower head with flow regulator (see model section). The BIV model is also supplied with an angled wall outlet elbow. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted, bar type, thermostatic shower mixer (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork with a cube type operating member controlling the flow between each shower outlet. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The product is supplied with a shower hose (PVC), shower handset (chrome plated), riser rail and overhead shower (chrome plated). The overhead shower and the shower handset both incorporate a plastic flow regulator and a combined EPDM washer and stainless steel strainer on the inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower mixers with brass bodies, dome or cube operating members and a thermostatic cartridge controlling the temperature. Models D1001, LB091, LB092, LB093, LB094, LB095, D2002, LB096, LB097, LB098, LB099, LB100, D3001, LB101, LB102, LB103, LB104 & LB105 incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves with brass bodies (chrome plated), incorporating two way diverter valves controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°.
Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of concealed, thermostatic blending valves with a brass body. The temperature is controlled via a thermostatic cartridge with a dome operating member which incorporates a manual override, and flow is controlled via a push on/off headwork to a single or optional shower outlet, depending on model. The inlet connections incorporate single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower mixer with brass body (chrome plated), incorporating a ceramic cartridge headwork ,controlling the flow and temperature and single lever operating member. The shower outlet incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted shower mixer with brass body (chrome plated face plate), incorporating a ceramic cartridge headwork ,controlling the flow and temperature with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted blending thermostatic shower valve (chrome plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both using cube type operating members. The inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow protection. The inlets also incorporate ¾” BSP (M) x 15mm compression (chrome plated) spherical ball valves and EPDM washers incorporating stainless steel mesh strainers. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic blending valve (chrome plated brass), incorporating a quarter turn ceramic disc headwork. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both using dome type operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection and EPDM washers incorporating stainless-steel strainers. The product is supplied with an approved shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The valves are supplied with a variety of shower kits that consist of shower hoses, shower handsets and riser rail assemblies. Model is supplied with a flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Wall mounted thermostatic shower valve (chrome plated brass), incorporating a non-rising spindle headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valves (chrome plated brass) with non-rising spindle headwork controlling the flow with single lever operating member. The temperature is controlled independently via a thermostatic cartridge with single lever operating member. The inlets for all models incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 Bar Maximum operating temperature 65°C.
Exposed thermostatic shower blending valve (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature using a single lever operating member. The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products can be supplied as a valve only, with a shower hose and handset or with an over head riser. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, thermostatic blending valves incorporating ceramic disc diverter cartridges. Inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to verify backflow protection. Product also had manual override button. Model VM207X and variants are supplied with variations of dome and single lever operating members. Model VM208X and variants are supplied with varaitions of cube type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The valve can be supplied with a variation of shower kits that can consist of the following components: handsets, overhead showers, shower hoses, wall outlets, fixed arms, and isolation valves. Maximum working pressure 7 bar. Maximum working temperature 65°C.
Concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is also supplied with a concealed diverter valves with a plastic body. The flow is controlled to two outlets via solenoid valves. The valve can be supplied with a variation of shower kits that can consist of the following components: handsets, overhead showers, shower hoses, wall outlets, fixed arms, and isolation valves. Maximum working pressure 5.0 bar. Maximum working temperature 65°C.
Electronically controlled thermostatic shower mixing valve with a plastic body. Temperature is controlled via two motorised valves and a thermistor. The product also incorporates a pump and plastic filters on each inlet. The valve can be supplied with a variation of shower kits that can consist of the following components: handsets, overhead showers, shower hoses, wall outlets, fixed arms, exposed elbows and isolation valves. Maximum working pressure 7.0 bar. Maximum working temperature 65°C.
Electronically controlled thermostatic shower mixing valve with a plastic body. Temperature is controlled via two motorised valves and a thermistor. The product also incorporates a pump and plastic filters on each inlet. This product is also supplied with a concealed diverter valves with a plastic body. The flow is controlled to two outlets via solenoid valves. The valve can be supplied with a variation of shower kits that can consist of the following components: handsets, overhead showers, shower hoses, wall outlets, fixed arms, exposed elbows, and isolation valves. Maximum working pressure 5.0 bar. Maximum working temperature 65°C.
Wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a ceramic cartridge headwork controlling the flow and temperature with single lever type operating member. Both inlets are supplied with a stainless-steel strainer. The inlets also incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 4.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valve (brass body, matt black finish), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C
Wall mounted thermostatic shower valve (brass body, matt black finish), incorporating a quarter turn ceramic disc headwork diverting the flow between overhead shower and handset with cube type operating member. Temperature is controlled independently via a thermostatic cartridge with a cube type operating member that incorporates a manual override button. The product incorporates a fixed riser and overhead shower and is supplied with a shower hose and handset. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure: 5.0 Bar Maximum operating temperature: 60°C.
Shower kit consisting of a wall mounted thermostatic blending valve incorporating a (brass body, matt black finish), quarter turn ceramic disc headwork controlling the flow, the temperature is controlled via a thermostatic cartridge which incorporates a manual override button and dome type operating members. Each inlet incorporates a combined EPDM washer with stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset, riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets) incorporating a quarter ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Incorporating a stainless steel strainer on each inlet. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) incorporating a thermostatic cartridge controlling the temperature with a manual override button and dome, single lever, cubed or cross top operating members. Flow is controlled via a ceramic disc diverter which also diverts water to two different outlets. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (9323TBRS & 9323TNKL models), dome (9320TBRS & 9320TNKL models). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Range of wall mounted, bar type thermostatic blending valves incorporating a quarter turn ceramic disc headwork or half turn ceramic diverter controlling the flow between outlets. The temperature is controlled by a thermostatic cartridge with various type of operating members incorporating a manual override button. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of wall mounted shower valves (chromium plated brass) incorporating self-cancelling diverter for the overhead shower to shower handset. The flow and temperature are controlled by a ceramic cartridge headwork with a single lever operating member. Both models have a fixed overhead shower and model 26023661 also is supplied with a hand shower and hose. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted bar type thermostatic shower mixer (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of adjustable or pre-set T-type thermostatic blending valves with brushed chromium plated DZR brass bodies. Supplied with an olive and compression nut. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of thermostatic bar type shower valve (brass body various finishes), incorporating a thermostatic cartridge controlling the temperature with a manual overide and a half turn ceramic disc headwork controlling the flow to 1 outlet (models CEL-149/DSG-149) or a manual diverter with an off position to 2 outlets (all other models) with single lever or dome operating members. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower hose, handset and overhead shower. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted, thermostatic shower valves with brass bodies (chrome plated finish), incorporating a ceramic disc headwork controlling the flow to an overhead or hand shower. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. The product also incorporates stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a shower handset and hose. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of exposed thermostatic shower valves with brass bodies (various finishes) incorporating a half turn ceramic disc headwork controlling the flow between 2 outlets, with the temperature being controlled independently via a thermostatic cartridge both with a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of exposed thermostatic blending valves, (chrome plated brass) incorporate a single sequential headwork controlling both the flow and temperature with single lever operating member. Model INSVDEV002 & INSMEV003 incorporates a non-rising spindle headwork controlling the flow and a thermostatic cartridge independently controlling the temperature The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model INSMEV003 also incorporates flow regulators. The products are supplied with shower hose, handset, and riser rail assemblies. Model INSMBIV004 is also supplied with a wall outlet. Maximum working pressure 5.0Bar for model (INSVEV002) Maximum working pressure 10.0Bar for model (INSVDEV001, INSMEV003 & INSMBIV004)
Non-metallic materials and components comply with BS6920 at 65°C
Range wall mounted, concealed, thermostatic shower valves (chrome plated brass, trim sets) incorporating a quarter turn ceramic disc headwork that controls the flow using cube or dome type operating members. The temperature is controlled independently via a thermostatic cartridge also cube or dome type operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products can be supplied with fixed arms and overhead showers. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 70°C
Range of concealed, thermostatic shower valves incorporating half turn ceramic disc headworks controlling and diverting the flow and the temperature is controlled independently via a thermostatic cartridge, both using either round or square operating members. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products can be supplied with wall outlets, fixed arms, shower handsets, shower hoses and overhead showers. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 70°C
Range of concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model 704014 is the valve only; all other models are supplied with isolation valves and model HQD1003 is supplied with an exposed elbow. Maximum working pressure 7.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with isolation valves and wall mounted concealed diverter valves with plastic bodies. Maximum working pressure 7.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of electronically controlled thermostatic shower mixing valve with a plastic body. Temperature is controlled via two motorised valves and a thermistor. The product also incorporates a pump and plastic filters on each inlet. The products are supplied with wall outlets, fixed arms, fixed heads, isolation valves. Model ISD.A2.14 is also supplied with an exposed elbow. Maximum working pressure 7.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
A range either concealed or exposed wall mounted thermostatic mixing valves with brass bodies (exposed models are chromium plated). Models CONCEALED007 & CONCEALED008 incorporate ¼ turn ceramic disc headworks and a manual diverter with a shut off. All models incorporate a thermostatic cartridge that controls the temperature. The inlets of all models incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 60°C.
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of wall mounted, concealed thermostatic blending valves or exposed bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button incorporate. An approved check valve cartridge is also supplied, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (F4017x & F2167x models. All other models 60°C only).
Range of wall mounted thermostatic blending valves (chrome plated brass), incorporating a quarter turn ceramic disc, half turn ceramic disc or ceramic cartridge headworks (see models). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button, with a variety of operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic blending valves (chrome plated brass), incorporating a quarter turn ceramic disc, half turn ceramic disc or ceramic cartridge headworks (see models). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button, with a variety of operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted, thermostatic shower valve (chromium plated brass body) incorporating a two-way diverter valve headwork that controls flow between each shower outlet with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member with a manual override button. Both inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 85°C.
Range of concealed and exposed thermostatic shower valves available in different finishes and flow rates. Shower valves supplied with overhead shower and handset. Concealed shower valves available as either wall mounted or ceiling mounted. The inlet connections incorporate single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of thermostatic shower panels incorporating a single sequential thermostatic control valve with a single lever operating member and flexible riser kit. Each inlet supplied with a servicing valve, EPDM o-ring and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with black lined PVC shower hoses and chrome plated shower handsets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic bar shower mixer (matte black plated brass), incorporating a ceramic disc diverter headwork controlling the flow between shower handset and overhead shower with a dome type operating member and a thermostatic cartridge controlling the temperature with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless-steel EPDM strainer washers and approved check valve cartridges; (however, the complete product has not been fully tested to demonstrate it provides backflow protection). The product is supplied with screwdriver operated isolation valves, an overhead shower incorporating an EPDM washer at the inlet, shower handset, shower hose incorporating an EPDM washer at the captive nut and a stainless-steel EPDM strainer washer in the conical nut & riser rail assembly. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic blending valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. The inlets incorporate stainless-steel EPDM strainer washers and approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with shower hose, shower handset and riser rail assembly. Maximum operating pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a detent headwork controlling the flow, a manual diverter to hand shower or overhead shower outlet and the temperature is controlled independently via a thermostatic cartridge. Model 78073-0001 is supplied with Dome type operating members and 78074-0001 has cubed type operating member. The temperature control incorporates a manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted shower blending valves (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork and also diverts between overhead shower and hand shower with single lever operating member. The temperature is independently controlled via a thermostatic cartridge with single lever operating member that incorporates a manual override. Inlets incorporate stainless steel strainers and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower handset, shower hose and overhead shower. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 70°C
Wall mounted, bar type thermostatic blending valves with brass bodies (various finishes see models) incorporating a quarter turn ceramic disc for diverting between shower handset and overhead shower and a thermostatic cartridge controlling the temperature with a manual override button, both with dome type operating members. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of concealed, wall mounted thermostatic blending valves (DZR brass body) with a variety of face plate finishes (see models). The products incorporate a ¼ turn ceramic disc headwork to control the flow with a dome operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted bar type thermostatic shower mixers (brass bodies available with a variety of finishes) incorporating a half turn ceramic disc headwork controlling the flow with a dome type operating member and a manual diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork, controlling and diverting the flow between overhead shower and handset, with dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate stainless steel strainer and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection Maximum working pressure 10.0 bar. Non-metallic materials and components comply with BS6920 at 85°C
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted, bar type, thermostatic shower blending valves with brass bodies (various finishes - see model), incorporating a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between each shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product is supplied with an overhead shower, shower hose and handset. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Series of wall mounted, thermostatic mixer valve with brass bodies, diverter headwork that controls flow between one, two or three outlets (see model) with various type of operating member. The temperature is controlled independently via a thermostatic cartridge operating member with a manual override button. Inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 55°C
Range of wall mounted,two hole,single outlet,thermostatically controlled combination tap assemblies (Chromium plated brass). Flow is controlled between the spout outlet and overhead shower by a 2 way ceramic disc diverter with adome type operating member. Temperature is controlled via a thermostatic cartridge with adome type operating member and a manual override button. The spout outlet can be turned 90 degrees to divert the flow to a further shower outlet. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless steel strainer and approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, exposed, bar type thermostatic blending valves with brass bodies (chrome or matte black plated), incorporating quarter turn ceramic disc headwork controlling/diverting the flow. Temperature is controlled independently with a thermostatic cartridge with manual override button. Model F3007 has dome type operating members. Model F3008 has cube type operating members. Model F3014 has single lever type operating members. The inlets incorporate a stainless steel strainer and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Models F3007 & F3008 have a maximum operating temperature of 85°C. Model F3014 has a maximum operating temperature of 75°C.
Range of wall mounted, concealed, thermostatic shower valves with a brass body (chrome trim set) incorporating a two-way ceramic disc diverter controlling the flow from shower handset arrangement to a secondary outlet with a dome type operating member. The temperature is controlled independently via a thermotatic cartridge with a dome type operating member that incorporates a manual override button. The product incorporates single check valve cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of T-type thermostatic mixing valves (chrome plated brass bodies). Temperature is pre-set under fixed cap. The inlets incorporate fibre washers, stainless-steel EPDM strainer washers and approved single check valve cartridges, however, (the complete product has not been fully tested to demonstrate it provides backflow protection). The inlets for models MT503CP-ISO & MT503CP-ISOELB also incorporate screwdriver operated isolation valves. Maximum working pressure 10.0 bar
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted thermostatic bar shower mixers (chrome plated brass bodies), incorporating ceramic disc diverter controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate screwdriver operated isolation valves, stainless-steel EPDM strainer washers and approved check valve cartridges, however, (the complete product has not been fully tested to demonstrate backflow protection). The products are supplied with a shower handset, shower head, hose, and riser rail assembly. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic bar shower mixers (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Model RYBS01 incorporates cube type operating members. The inlets incorporate stainless-steel EPDM strainer washers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hoses, shower handsets and riser rail assemblies. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, concealed thermostatic blending valves or exposed bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button incorporate. An approved check valve cartridge is also supplied, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (NU-019 & NU-022 models. All other models 60°C only).
Wall mounted thermostatic shower valve, (brass body - various finishes) incorporating a ceramic disc diverter headwork controlling the flow to the hand shower or overhead shower outlet. The temperature is controlled independently via a thermostatic cartridge a with single lever operating member which incorporates a manual override. The valve and shower head inlets incorporate stainless steel strainer washers with a flow regulator in the shower handset. The valve and shower handset inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, handset, and overhead shower outlet. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of thermostatic shower mixing valves, (brass bodies - various finishes). The temperature is controlled via thermostatic cartridges with cross top operating members and the flow is controlled via two quarter turn ceramic disc headworks with single lever operating members. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, handset, overhead shower and riser rail assembly. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, manually operated, thermostatic blending valves with chrome plated brass bodies. The temperature is controlled via a thermostatic cartridge using a dome type operating member. Inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of concealed, thermostatic blending valves with 2 or 3 shower outlets, incorporating a thermostatic cartridge controlling the temperature with a dome type operating member that incorporates a manual override button and ceramic disc diverters or quarter turn ceramic disc headworks controlling the flow with dome type operating members. The products incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, two-hole, thermostatic blending valves, (chrome plated brass bodies) incorporating two detent headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge with switch type operating member that incorporates a manual override button. The product is supplied with an overhead shower, shower hose, handset and riser rail assembly. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 70°C
Series of wall mounted, thermostatic mixer valve with brass bodies, diverter headwork that controls flow between one, two or three outlets (see model) with various type of operating member. The temperature is controlled independently via a thermostatic cartridge operating member with a manual override button. Inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 55°C
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and Trim Sets. The flow is controlled to separate shower outlets via independent ceramic disc headworks, the top outlet is controlled by a ¼ turn ceramic disc, the bottom outlets are controlled by a 2 way shower to shower ceramic disc diverter headwork. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome, single lever, cross top or cube type operating members. The inlets each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic shower valves incorporating ceramic disc diverter headworks controlling the flow with dome type operating member. The temperature is controlled independently via a thermostatic cartridge, with dome, cube or single lever operating members that also incorporate a manual override button.. The inlets incorporate a stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted thermostatic bar shower mixers, (brass bodies - various finishes), incorporating two way diverter valve controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating members that incorporate a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and overhead shower and riser rail assembly. The handset with model RTSDEF also incorporates a flow regulator. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic shower valves (brass bodies – various finishes), incorporating thermostatic cartridges controlling the temperature with single lever operating members. The inlets incorporate approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of high pressure and low pressure thermostatic mixing valves. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Low pressure models incorporate a pump. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves marked with ‘LP’ have a maximum working pressure of 1.0 bar.
Non-metallic materials and components comply with BS6920 at 45°C
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed, thermostatic shower valves incorporating ceramic disc diverter headworks controlling the flow with dome type operating member. The temperature is controlled independently via a thermostatic cartridge, with dome, cube or single lever operating members that also incorporate a manual override button.. The inlets incorporate a stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted,two hole,single outlet,thermostatically controlled combination tap assemblies (Chromium plated brass). Flow is controlled between the spout outlet and overhead shower by a 2 way ceramic disc diverter with adome type operating member. Temperature is controlled via a thermostatic cartridge with adome type operating member and a manual override button. The spout outlet can be turned 90 degrees to divert the flow to a further shower outlet. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless steel strainer and approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, concealed, thermostatic shower valves incorporating ceramic disc diverter headworks controlling the flow with dome type operating member. The temperature is controlled independently via a thermostatic cartridge, with dome, cube or single lever operating members that also incorporate a manual override button.. The inlets incorporate a stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of concealed, thermostatic blending valves with 2 or 3 shower outlets, incorporating a thermostatic cartridge controlling the temperature with a dome type operating member that incorporates a manual override button and ceramic disc diverters or quarter turn ceramic disc headworks controlling the flow with dome type operating members. The products incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
T-type thermostatic mixing valve with a DZR brass body. Temperature is pre-set under a fixed cap. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic bar shower mixers (chrome plated brass bodies), incorporating either a ¼ turn ceramic disc headwork or a 2-way manual diverter to control the flow to either 1 or 2 outlets (see models) with either dome type, single lever or cube type operating members (see models). The temperature is controlled independently via a thermostatic cartridge with either a dome type, single lever or cube type (see models) operating member that incorporates a manual override button. The inlets incorporate stainless-steel strainer and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 65°C
“Heatguard Dual Thermostatic Mixing Valves”, range of T type thermostatic mixing valves with brushed chrome plated brass bodies. The inlets incorporate check valve cartridges (all models) and isolation valves (models HEAT110616 & HEAT110625 only). Check valve cartridges are verified by test (suitable for backflow protection against Fluid Category 2). Products also include stainless-steel strainers. Maximum working pressure 6 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, concealed, thermostatic blending valves with (brass bodies - various finishes, see models). The temperature is controlled via a thermostatic cartridge with single lever, cross top or cube type operating members incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 70°C
Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products can consist of quarter turn ceramic disc or detent headworks, two-way diverter cartridges and a thermostatic cartridges (see models). All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted thermostatic bar shower mixers (chrome plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating members that incorporate a manual override button. The inlets incorporate stainless-steel strainer washers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of exposed and conceled thermostatic mixing valves with brass bodies (chrome plated or finished for concelled). Incorporating single check valves at the inlets, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, thermostatic shower valves, (brass bodies - various finishes), incorporating a ceramic disc diverter cartridges controlling the flow with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower, shower hose, handset and riser rail assemblies. Maximum working pressure 10 Bar. Maximum operating temperature 60 °C
Non-metallic materials and components comply with BS6920 at 60°C
Concealed wall mounted thermostatic mixing valves with brass bodies Incorporates a manual diverter with a shut off. All models incorporate a thermostatic cartridge that controls the temperature. The inlets incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 60°C.
Range of wall mounted thermostatic shower panels. Incorporates a single sequential headwork which controls the flow and temperature using a single lever operating member to a fixed riser rail shower hose and handset. The inlet incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with stainless steel strainers, flow restrictors and isolation valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of exposed thermostatic shower blending valves (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature using a single lever operating member. The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products can be supplied as a valve only, with a shower hose and handset or with an over head riser. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valve (matte black plated brass), incorporating a ceramic disc diverter valve controlling the flow and a thermostatic cartridge independently controlling the temperature incorporating a manual override button, both using cube type operating members. The inlets incorporate stainless steel strainers with EPDM O-rings and approved check valve cartridges; however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower handset, shower hose, overhead shower, and riser rail assembly. The shower hose and overhead shower incorporate stainless steel strainers with EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic bar shower mixer (matte black plated brass), incorporating a ceramic disc diverter headwork controlling the flow between shower handset and overhead shower with a dome type operating member and a thermostatic cartridge controlling the temperature with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless-steel EPDM strainer washers and approved check valve cartridges; (however, the complete product has not been fully tested to demonstrate it provides backflow protection). The product is supplied with screwdriver operated isolation valves, an overhead shower incorporating an EPDM washer at the inlet, shower handset, shower hose incorporating an EPDM washer at the captive nut and a stainless-steel EPDM strainer washer in the conical nut & riser rail assembly. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of exposed wall mounted thermostatic shower valves, (chrome plated brass bodies). Both inlets incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valve (chrome plated brass), incorporating a non-rising spindle headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic bar type shower valves with a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (brass bodies - with various trim plates & finishes). Flow is controlled to each outlet via a ‘detent’ (push to on push to off) headwork. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with manual override button. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted thermostatic bar shower mixers, (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork controlling the flow with cubed or dome type operating members. The temperature is controlled independently via a thermostatic cartridge cube or dome type operating members incorporating a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted bar type thermostatic shower mixer (brass body – various finishes) incorporating a half turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and stainless-steel strainers. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of concealed thermostatic shower mixing valves with (brass bodies - various finishes), incorporating a ceramic disc diverter valve controlling the flow between two outlets. The temperature is controlled independently via a thermostatic cartridge with a manual override button. The products are supplied with trim sets and operating members in a various finishes. The 15 708 xxx model has cube type operating members, and all other models have single lever operating members. Both inlets incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of concealed thermostatic shower mixing valves with (brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a various finishes. The 15 707 xxx models have cube type operating members, the 15 714 xxx & 15 758 xxx models have single lever operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic bar shower mixers, (chrome plated brass bodies), incorporating a ceramic disc diverter cartridge controlling the flow with a dome type operating member. The temperature is controlled independently with a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless steel strainer washers, approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection and screwdriver operated isolation valves. The products are supplied with a shower hose, handset, riser rail assembly and an overhead shower outlet. Maximum working pressure 10.0 bar
Non-metallic materials and components comply with BS6920 at 65°C
Wall mounted thermostatic bar shower mixer, (chrome plated brass body), incorporating a quarter turn ceramic disc headwork controlling the flow with a cubed type operating member. The temperature is controlled independently via a thermostatic cartridge with a cubed type operating member that incorporates a manual override button. The inlets incorporate stainless steel strainer washers and approved single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection and screwdriver operated isolation valves. The product is supplied with a shower hose, handset, and riser rail assembly. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of concealed wall mounted thermostatic shower valves, (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge, both using single lever type operating members. The inlets incorporate stainless steel strainer washers and approved single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset, overhead shower, wall mounted shower outlet, wall mounted shower arm and a riser rail assembly. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of concealed wall mounted thermostatic shower valves, (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge, both using cubed type operating members. The inlets incorporate stainless steel strainer washers and approved single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset, overhead shower, wall mounted shower outlet, wall mounted shower arm and a riser rail assembly. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted thermostatic bar shower mixer, (chrome plated brass body) incorporating a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporates approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. This product is supplied with a shower hose, handset and riser rail assembly. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic shower valves (chrome plated brass). Flow is controlled by a ceramic disc diverter cartridge, using dome type operating members. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which also incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic mixing vales with brass bodies and chrome plated trim sets, incorporating one or two quarter turn ceramic disc headworks with Single Lever operating members. Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Wall mounted, concealed, thermostatic shower valve with a brass body (chrome trim set) incorporating a two-way ceramic disc diverter controlling the flow from shower handset arrangement to a secondary outlet with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The product incorporates single check valve cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, exposed, bar type thermostatic blending valves with brass bodies (chrome or matte black plated), incorporating quarter turn ceramic disc headwork controlling/diverting the flow. Temperature is controlled independently with a thermostatic cartridge with manual override button. Single lever type operating members. The inlets incorporate a stainless steel strainer and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature of 75°C.
Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products can consist of quarter turn ceramic disc or detent headworks, two-way diverter cartridges and a thermostatic cartridges (see models). All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted two hole, shower outlet thermostatic shower mixing valves (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork and temperature is independently controlled via a thermostatic cartridge with cross top, dome type or single lever operating members. Inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Wall mounted thermostatic blending valves with brass bodies (various finishes), incorporating a quarter ceramic disc headwork controlling the flow with dome type operating member. Temperature is controlled via a thermostatic cartridge with dome type operating member incorporating a manual override button and a push button manual diverter to shower outlet. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
Range of T-type thermostatic mixing valves (chrome plated DZR brass). The 521928 model incorporates stainless steel strainers in the inlets and approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure: 10.0 Bar. Temperature: 90°C
Range of wall mounted, bar type thermostatic blending valves incorporating a quarter turn ceramic disc headwork or half turn ceramic diverter controlling the flow between outlets. The temperature is controlled by a thermostatic cartridge with various type of operating members incorporating a manual override button. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic shower mixing valves (chromium plated brass). The products incorporate a ¼ turn ceramic disc or a 2-way ceramic disc diverter headwork (see model). Temperature is controlled independently via a thermostatic cartridge with a manual override button. The products have dome type operating members. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Wall mounted thermostatic shower valve, (brass body - various finishes) incorporating a ceramic disc headwork controlling the flow to the shower outlet with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge a with single lever operating member which incorporates a manual override. The inlets incorporate approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic bar shower mixers, (chrome plated, brass bodies) incorporating either a quarter turn ceramic disc headworks or a ceramic disc diverter valve controlling the flow with cubed or dome type operating members. The temperature is controlled independently via a thermostatic cartridge using cubed or dome type operating members that incorporate a manual override button. The inlets incorporate stainless-steel strainers, EPDM washers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted, concealed thermostatic blending valves with (brass bodies – various chrome plated trim sets). The flow is controlled by either a quarter turn ceramic disc headwork, a ceramic disc diverter valve or both using single lever or cubed type operating members. The temperature is controlled via a thermostatic cartridge using a cross-top, cubed or single lever operating members. The products incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate the is provides backflow protection. Maximum working pressure 8.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of thermostatic bar shower mixers, (chrome plated brass bodies), incorporating a quarter turn ceramic disc headwork with single lever type operating members. The temperature is controlled independently via a thermostatic mixing cartridge that incorporates a single lever type operating members and a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0
Non-metallic materials and components comply with BS6920 at 52°C
Range of wall mounted, exposed thermostatic shower valves brass body with black finish. Flow is controlled and on twin outlet models, diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork with dome operating member. Temperature is controlled independently via a thermostatic cartridge with manual override button and dome type operating member. Both inlets incorporate stainless steel strainers. The inlets of models 1.1836.465 & 1.1878.467 incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 50°C.
Range of wall mounted, bar type thermostatic shower mixer (chromium plated brass) Incorporating a quarter turn headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets and shower outlet incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic shower valve (chrome plated brass body), incorporating a non-rising spindle headwork controlling the flow. The temperature is controlled independently with a thermostatic cartridge, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower kit that consists of a shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of thermal circulation valves with gunmetal bodies and EPDM ‘O’-rings. Models incorporate drain valves. Maximum operating pressure 16.0 bar. Maximum operating temperature 90°C.
Range of wall mounted thermostatic blending valves (chrome plated brass), incorporating a quarter turn ceramic disc or ceramic cartridge headworks (see models). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button, with a variety of operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic shower valves, (chrome plated brass bodies). Models (EG1290 & EG1209002) incorporate a non-rising spindle headwork controlling the flow with a single lever operating member. Models (EG15092 & EG1509201) incorporate quarter turn ceramic disc headworks controlling the flow with single lever operating members. The temperature on all models is controlled by a thermostatic cartridge using a cross-top type operating member. The shower outlet connection incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar Maximum operating temperature 65.0°C
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted thermostatic mixing valves (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature using a single lever operating member. Inlets incorporate servicing valves and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models except model 521308, 521324, 521314 and 521318 incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models CA-100827 & CA-100828 both 60°C
Range of wall mounted thermostatic bar shower mixers (brass bodies – chrome plated or black finish) incorporating quarter turn ceramic disc headwork controlling the flow with cubed or dome type operating members. The temperature is controlled independently via a thermostatic cartridge cube or dome type operating members incorporating a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted, concealed, thermostatic shower valve incorporating ceramic disc diverter headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge, with dome operating members that also incorporate a manual override button. The inlets incorporate a stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products consist of detent headworks, two-way diverter cartridges and a thermostatic cartridges (see models). All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of T type thermostatic blending valves incorporating stainless steel strainers at the inlet. “2 IN 1” models incorporate check valve cartridges at both inlets. “4 IN 1” models have angled isolation valves at both inlets which incorporate a check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar
Non-metallic materials and components comply with BS6920 at 85°C
Thermostatic blending valves (chromium plated DZR brass bodies) incorporating a thermostatic cartridge controlling the temperature. Inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
T-type thermostatic blending valve with a brushed chrome, DZR brass body. Temperature is pre-set under a fixed cap. The inlets incorporate stainless steel strainers and single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of 2, 3 or 4 way, concealed, wall mounted thermostatic shower valves (brass finish) incorporating a thermostatic cartridge controlling the temperature, a ceramic disc headwork controlling the flow and a ceramic disc manual diverter with single lever operating members. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of T type thermostatic blending valves (chromium plated, DZR brass) Maximum working pressure 10.0 bar. Maximum operating temperature 62°C.
T-type thermostatic mixing valve with brass body incorporating EPDM ‘O’ rings and stainless steel springs. Maximum working pressure 16 bar. Maximum operating temperature 85°C
Range of concealed electronic thermostatic shower valves with a plastic body, the flow is controlled via either, 1, 2 or 3 solenoid valves which to either 1, 2 or 3 outlets (see models) and the temperature is controlled via a motorised valve operated via a control panel. Both inlets incorporate a plastic strainer. Maximum working pressure 5.0 Bar Maximum operating temperature 65.0°C
Non-metallic materials and components comply with BS6920 at 65°C
Range of concealed thermostatic valves with thermostatic cartridges. Models SHO001PL, SHO032VI, SHO042KL, SHO141OT, SHO020LO，SHO026PR， SHO009EL，SHO045NR, SHO047NS, SHO000PL，SHO041KL & SHO025PU consist of quarter turn ceramic disc headworks controlling the flow and the temperature is controlled independently via thermostatic cartridge. Models SHO010EL SHO002PL,SHO033VI, SHO043KL SHO142OT， SHO021LO, SHO027PR, SHO046NR & SHO049NS consists of a two-way diverter cartridge controlling the flow and a thermostatic cartridge controlling the temperature. Model SHO012PR consists of a three-way diverter cartridge controlling the direction of flow, a thermostatic cartridge controlling the temperature and a quarter turn ceramic disc controlling the flow. All models incorporate cube, dome, cross-top or single lever type operating members. The inlets incorporate stainless steel strainers and single check valve cartridges; however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating push type operated diverter to shower outlets (shower outlets not supplied). The inlets incorporate stainless steel strainers and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with cube type operating members. The hot and cold inlets within the valve body each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, bar type, thermostatic shower blending valves (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a cube operating member incorporating a manual override button. The temperature is controlled by a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Wall mounted, thermostatic blending valve shower valve with brass body, incorporating a ceramic disc headwork with dome or cubed type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome or cubed type operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Grohetherm 800 & 1000 models have single lever operating members and the Grohetherm 1000 Cosmopolitan models have dome type operating members. 34.146.003 and 34.561 models incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless steel strainers on the inlets. All other models incorporate stainless steel strainers and single check valve cartridges on the inlets, as well as a single check valve cartridge on the shower outlet (however, the complete product has not been fully tested to demonstrate it provides backflow protection). 34.438.003 and 34.562 models also incorporate a flow regulator on the shower outlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models VAH0347 - 5059340245775 & VAH0348 - 5059340245782 both 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models 86345023 & 86345034 both 60°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models 623224 & 623229 both 60°C.
Range of wall mounted thermostatic shower valves, (chrome plated brass bodies) incorporating spindle headworks controlling the flow with single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a cross-top operating member. The inlets incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). The products are supplied with a shower kit consisting of a wall mounted elbow, overhead shower and a riser rail assembly. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted thermostatic shower valve (chrome plated brass), incorporating a ceramic disc diverter cartridge controlling the flow from shower to shower with a cube operating member. The temperature is controlled independently via a thermostatic cartridge, with a cube operating member, that also incorporates a manual override button. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. The inlets incorporate approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection), chrome plated spherical ball valves and stainless-steel strainers with EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. models HVTMV-15IV & HVTMV-22IV are also fitted with brass isolating elbows. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted blending thermostatic shower valve (chrome plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both using cube type operating members. The inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow protection. The inlets also incorporate ¾” BSP (M) x 15mm compression (chrome plated) spherical ball valves and EPDM washers incorporating stainless steel mesh strainers. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic blending valve with a brass body (various finishes). The flow is controlled via a quarter turn ceramic disc with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. Product is not supplied with shower hose of handset. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted thermostatic shower valve (brass body - various finishes and trim sets), incorporating a thermostatic cartridge controlling the flow and temperature with a single lever or cross top operating members with a manual override button. The inlets incorporate a stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using single lever operating members incorporating a manual override. The temperature is controlled independently via a thermostatic cartridge, using a single lever operating member incorporating a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies and manually adjustable temperature control. The inlets of the press fit and push fit models incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Press fit and push fit connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, bar type thermostatic shower valves (brass body – various finishes), incorporating quarter turn ceramic disc headworks controlling the flow with single lever operating member that incorporates a manual override button. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. Each inlet and hand shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, thermostatic shower valves (chrome plated brass bodies), model (OP TS1503 SCL C) incorporates a single sequential headwork controlling both flow and temperature. Model (TS1503ECP-2000-MK) incorporates a thermostatic mixing cartridge that only controls the temperature. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted, thermostatic shower valves, (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge the temperature, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers, screwdriver operated isolation valves and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow, with single lever operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Models incorporate stainless-steel strainers, fibre gasket washers and single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection) on the inlets. Products are not supplied with shower hose or handset. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
T-type thermostatic mixing valve with a brass body. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless steel strainers. Maximum working pressure 10 bar. Maximum operating temperature 65°C
Thermostatic shower valve incorporating a detent headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. The inlets incorporate approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate that they provide backflow protection). Maximum working pressure 10 Bar. Maximum operating temperature 60 °C.
Range of wall mounted bar type thermostatic shower vavles, (brass bodies – various finishes) incorporating a ceramic disc diverter cartridge controlling the flow, with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. This product is supplied with a hose, handset and overhead shower. Maximum working pressure 5 bar. Maximum operating temperature 65°C
Range of wall mounted thermostatic, bar type shower valves. Models (801509 & 801510) incorporate quarter turn ceramic disc headworks and model (801508) incorporates a non-rising spindle headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge that incorporates a manual override button. Both using either dome, cubed or single lever type operating members. The inlets incorporate stainless steel strainer washers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 65°C
Range of wall mounted, thermostatic mixer valve with brass bodies, diverter headwork that controls flow between two or three outlets (see model) with various type of operating member. The temperature is controlled independently via a thermostatic cartridge operating member with a manual override button. Inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 55°C
Range of wall mounted, thermostatic blending shower valves, incorporating a quarter turn ceramic disc headworks or ceramic disc diverter cartridges (see models) with a cube type operating members. The temperature is controlled independently via a thermostatic cartridge with a cube type operating members that incorporate manual override buttons. Model (1.1901.001) is supplied with a shower hose, hanset & riser rail assemblies. Model (1.1901.002) is supplied with a shower hose, handset, overhead shower & riser rail assebmlies. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 10 bar. Maximum operating temperature 45°C
Non-metallic materials and components comply with BS6920 at 45°C
Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with shower kits consisting of a shower hose, handset & a riser rail assembly. Maximum working pressure 5.0 Bar Maximum operating temperature 85°C.
Range of wall mounted concealed thermostatic shower valves (brass bodies with chrome plated plastic trim sets), incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge, both using dome type operating members. The inlets incorporate stainless-steel strainer washers and single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection). The products are supplied with a chrome plated shower handset, shower hose, plastic wall mounted shower outlet and riser rail assembly. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, concealed thermostatic blending valves or exposed bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button incorporate. An approved check valve cartridge is also supplied, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (NU‐035 & NU‐037 models. All other models 60°C only).
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, concealed, thermostatic mixing vales with brass bodies and chrome plated trim sets, incorporating one or two quarter turn ceramic disc headworks with various operating members (see models). Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, thermostatic bar shower mixer (chrome plated brass body), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is supplied with an overhead shower, handset, shower hose and a riser rail assembly that incorporates a manual diverter that controls flow from overhead shower and shower handset. Maximum working pressure 5.0 bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of bar type thermostatic mixing valves, incorporating a quarter turn ceramic disc headwork controlling the flow using a down type operating member. Temperature is controlled via a thermostatic cartridge also using a dome type operating member. Inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic blending valves with (brass bodies - various finishes), incorporating a manual diverter which controls the flow. Temperature is controlled independently via a thermostatic cartridge with dome type operating members incorporating a manual override. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of concealed thermostatic shower valves, (brass bodies – various finished trim sets), incorporating, ceramic cartridge controlling the flow with a single lever operating member and detent headworks diverting the flow from shower to shower. The temperature is controlled independently via a thermostatic cartridge with dome type operating member with manual override buton. The inlets incorporate single check valve cartridges, (however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection). Maximum operating pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted exposed and concealed thermostatic shower valves, chrome plated brass body or brass bodies with chrome trim sets). Incorporating a single sequential headwork controlling both flow and temperature with single lever operating members. The inlets incorporate plastic flow regulators. Model (1.1656.011) is supplied with a shower hose, handet and riser rail assembly. Model (1.1656.012) is supplied with a wall mounted shower outlet, hose, handset and riser rail assembly. Model (1.1656.013) is supplied with a wall mounted shower arm and an overhead shower. Maximum operating pressure 5 bar. Maximum operating temperature 65°C
Range of wall mounted concealed two and three hole thermostatic shower valves with brass bodies. Incorporating two-way diverter valves. Model (V132-IS-XX) also incorporates a quarter turn ceramic disc headwork. Temperature is controlled independently via a thermostatic cartridge. The products incorporate single check valve cartridges, (however, the complete products have not been fully tested to demonstrate it provides backflow protection). Maximum operating pressure 10.0 bar.
Range of wall mounted concealed and exposed thermostatic shower valves, (chrome plated brass bodies or chrome trim sets), incorporating single sequential headworks controlling both the flow and temperature. The inlets incorporate single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with flow regulators. Maximum operating pressure 5.0 bar. Maximum operating temperature 50°C
Range of MIRA MODE high pressure or pumped, wall fed or ceiling fed bath/shower mixing valves supplied with overhead shower and shower handsets. Inlets are supplied with isolation valves. Maximum working pressure 5 bar for high pressure models and 1 bar for pumped models. Non-metallic materials and components comply with BS6920 at 48°C.
Wall mounted, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using single lever operating members incorporating a manual override. The temperature is controlled independently via a thermostatic cartridge, using a single lever operating member incorporating a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. Compression fitting connection to be used with copper pipe to BS EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models CORETMV015MX & CORETMV022MX both 60°C
Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products consist of two-way diverter cartridges and a thermostatic cartridges. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Wall mounted, exposed, thermostatic shower mixing valve (black plated brass). The products incorporate a ¼ turn ceramic disc. Temperature is controlled independently via a thermostatic cartridge with a manual override button. The products have a dome type operating member. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Range of wall mounted thermostatic bar shower mixers, (chrome plated brass bodies), incorporating half turn ceramic disc headwork with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. The products are supplied with shower kits that consist of a shower hose, handset and riser rail assembly. Maximum working pressure 10.0Bar Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, concealed thermostatic blending valves (brass bodies - various finishes), incorporating a non-rising spindle headwork controlling the flow and a manual diverter directing the flow between multiple shower outlets using single lever operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless-steel strainers and an approved single check valve cartridge however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic bar shower mixers (brass bodies – various finishes). Incorporating quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted, thermostatic shower valves, (chrome plated brass body), incorporating a single sequential headwork controlling both flow and temperature with a single lever operating member. Maximum working pressure: 10.0 bar Maximum operating temperature: 65°C
Range of concealed and exposed thermostatic shower valves, (chrome plated brass bodies and trim sets), incorporating quarter turn ceramic disc diverter valves with cross top operating members controlling the flow to either 1, 2 or 3 outlets (see models). The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 48°C
Wall mounted thermostatic bar shower mixer, (brass body – various finishes), incorporating a quarter turn ceramic disc headworks with dome type operating members. The temperature is controlled independently with thermostatic mixing valve with a dome type operating member that incorporates a manual override button. The inlets incorporates approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic blending valves (chrome plated brass), incorporating ceramic cartridge headworks (see models). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button, with a variety of operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic shower valves, (chromium plated brass), incorporating a thermostatic cartridge which controls both flow and temperature. All models have a single lever operating member controlling the flow and either a single lever operating member (gr-sk-01, gr-sk-04 and gr-sk-11 models) or a cross-top operating member (gr-sk-06 and gr-sk-07 models) controlling the temperature. All models, except the gr-sk-11 model, includes a manual override button on the temperature control. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Concealed wall mounted thermostatic blending valve, (brass body – chrome trim set), incorporating quarter turn ceramic disc headworks with single lever operating members. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. The inlets incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 65°C
Range of ‘Waterforms’ wall mounted, thermostatic blending valves with (brass bodies - various finishes), incorporating a manual diverter which controls the flow. Temperature is controlled independently via a thermostatic cartridge with dome type operating members incorporating a manual override. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of wall mounted, concealed thermostatic shower valves (brass bodies – various finished trim sets). All models comprise of an iBox that can consist of the following combinations. iBox incorporating a thermostatic cartridge with a dome type operating member. iBox incorporating a thermostatic cartridge with a dome type operating member and a detent headwork with a push button operating member to a shower outlet. iBox incorporating a thermostatic cartridge with a dome type operating member and two detent headworks with push button headworks to multiple shower outlets. iBox incorporating a thermostatic cartridge with a dome type operating member, two detent headworks with push button operating members to shower outlets and an internal shut off valve. All models incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C
Range of wall mounted thermostatic shower valves, (chromium plated brass), incorporating a thermostatic cartridge which controls both flow and temperature. All models have a single lever operating member controlling the flow and either a single lever operating member controlling the temperature. 86005660 does not include a manual override button on the temperature control. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C
Range of wall mounted, thermostatic bar shower mixer (chrome plated brass body), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is supplied with an overhead shower, handset, shower hose and a riser rail assembly that incorporates a manual diverter that controls flow from overhead shower and shower handset. Maximum working pressure 5.0 bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, concealed, thermostatic mixing vales with brass bodies and chrome plated trim sets, incorporating one or two quarter turn ceramic disc headworks with various operating members (see models). Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. The inlets incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The product is supplied with angled servicing valves with brushed chrome plated DZR brass bodies and ball. The product incorporates a stainless steel strainer and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. The inlets incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The product is supplied with angled servicing valves with brushed chrome plated DZR brass bodies and ball. The product incorporates a stainless steel strainer and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted, concealed, thermostatic mixing valves with a brass body. Maximum working pressure 6.0 bar. Maximum operating temperature 65 C
Range of wall mounted, thermostatic blending valves (brass bodies – various finishes), incorporating a ceramic disc headwork controlling the flow with a dome type operating member, temperature is controlled via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product is supplied with a shower hose, handset and overhead shower. The outlet to the shower hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C
Range of wall mounted, concealed, thermostatic blending valves with brass bodies in various finishes. The flow is controlled via ceramic disc or push-button headwork with dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, thermostatic blending valves, (brass bodies various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow.Temperature is controlled independently via a thermostatic cartridge with a manual override button incorporating dome or lever type operating members, Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic bar shower mixer,(brass bodies - various finishes), incorporating quarter turn ceramic disc headworks. The temperature is controlled independently via a thermostatic cartridge that incorporates a manual override button. Model (CPH8072AB) incorporates a ceramic disc diverter valve. Incorporating dome or cube operating members. The inlets incorporate stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves incorporating detent headworks controlling the flow. Temperature is controlled via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with a shower hose, shower handset and over head shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of concealed, wall mounted thermostatic blending valves, (brass bodies – various finished trim sets). Models (CPHCA22-CONC & CPHCON-3) incorporate a ceramic disc diverter valve. Model (CPHCON-1) incorporates a quarter turn ceramic dsic headwork. The temperature is controlled independently via a thermostatic cartridge. All models are operated using single lever operating members. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic shower valve, (brass body – chrome plated), incorporating a single sequential headwork with a single lever operating member. The inlet elbows incorporate key operated spherical valves with chrome plated brass balls, PTFE seats and approved single check vlave cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. To be used with copper pipe only – Standard EN 1057 Maximum working pressure 5 Bar. Maximum operating temperature 65°C
Range of wall mounted thermostatic bar shower mixers (chrome plated brass bodies), incorporating a quarter turn ceramic disc headwork controlling the flow with cubed or dome type operating members. The temperature is controlled independently via a thermostatic cartridge with dome or cubed type operating members that incorporate manual override buttons. The inlets incorporates approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Products are supplied with a shower handset, shower hose, overhead shower and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic shower valves (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature with a single lever operating member. The products are supplied with 15mm compression inlet elbows incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate plastic flow regulators. The 90033CP model can have either a top or bottom outlet, which is achieved by re-positioning the blanking plug and threaded outlet. The compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
A range either concealed or exposed wall mounted thermostatic mixing valves with brass bodies (exposed models are chromium plated). Incorporates ¼ turn ceramic disc headworks. The inlets of all models expect F3004 incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 60°C.
Thermostatic blending valve, (DZR brass body – nickel plated). The inlets incorporate an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 50°C.
Range of concealed, wall mounted thermostatic blending valves with brass bodies (chromium plated trim set). The product incorporates a ¼ turn ceramic disc or a 2 way manual diverter with shut-off position to control the flow, with dome type operating members.The temperature is controlled independently via thermostatic cartridges, with dome type operating members. The inlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure: 5 Bar. Maximum operating temperature: 60°C.
Wall mounted concealed three way diverter valve assembly (brass bodies with trim sets in various finishes). Maximum working pressure 10 bar. Maximum operating temperature 70°C
Range of wall mounted, concealed thermostatic blending valves (brass bodies - various finishes), incorporating non-rising spindle headworks controlling the flow using dome type operating members. Temperature is controlled via a thermostatic cartridge with a manual override button and a dome type operating member. The products are supplied with approved single check valve cartridges however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 10 Bar. 10 755 xx0 and 36 702 xx0 - Maximum operating temperature 60°C All other models Maximum operating temperature 70°C
Wall mounted thermostatic bar shower mixers (chrome plated brass bodies), incorporating either a ¼ turn ceramic disc headwork or a 2-way manual diverter to control the flow to either 1 or 2 outlets (see models) with either dome type, single lever or cube type operating members (see models). The temperature is controlled independently via a thermostatic cartridge with either a dome type, single lever or cube type (see models) operating member that incorporates a manual override button. The inlets incorporate stainless-steel strainer and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of concealed thermostatic valves with thermostatic cartridges. Models (XB-AZ-034B & XB-AZ-035B) consist of quarter turn ceramic disc headworks controlling the flow and the temperature is controlled independently via thermostatic cartridge. Model (XB-AZ-037B) consists of a two-way diverter cartridge controlling the flow and a thermostatic cartridge controlling the temperature. Model (XB-AZ-038B) consists of a three-way diverter cartridge controlling the direction of flow, a thermostatic cartridge controlling the temperature and a quarter turn ceramic disc controlling the flow. All models incorporate cube, dome, cross-top or single lever type operating members. The inlets incorporate stainless steel strainers and single check valve cartridges; however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted exposed shower valves (Brass bodies – various finishes), incorporating single sequential headworks controlling both flow and temperature with single a single lever operating member. Models (BPMO SHXVO C & BPRR SHXVO C) incorporate non-rising spindle headworks controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with cross-top operating members. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Models (Mini TS1203 RR C, R2 SHXRR C & KN2 SHXRR C) are supplied with riser rails and overhead shower outlets. Models (R2 SHXVO C, BPRO SHXVO C & BPMO SHXVO C) valve only. All other models are supplied with shower hose, handset and riser rail assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
