Delabie SAS Approvals


#1904701

Range of wall and ceiling mounted shower outlets with chromium plated brass bodies. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1904701
Expiry date:
30/04/2024
Size:
716000 GYM model: ½” BSP (F). All other models: ½” BSP (M).
Marking:
Delabie on spray outlet
Model:
709000 ROUND, 709010 ROUND, 709150 ROUND, 709200 ROUND, 712000 TONIC JET, 712010 TONIC JET, 712150 TONIC JET, 712200 TONIC JET & 716000 GYM Range of shower outlets
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1911704

Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a single sequential headwork with a single lever operating member. The inlet couplings incorporate a plastic flow regulator & plastic strainer. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1911704
Expiry date:
30/11/2024
Size:
Models H9630 & H9640: ¾” to ½” BSP (M) offset union. Models H963015 & H964015: ½” BSP (M).
Marking:
Delabie on operating member
Installation Requirements:
R001 R010 R040
Model:
H9630, H9640, H963015 & H964015
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1907013

Range of wall mounted, self-closing, knee operated tap assemblies (chromium plated brass) incorporating spring loaded headwork with single lever type operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
1907013
Expiry date:
31/07/2024
Size:
Model 73544715: 15mm compression. All other models: ½” BSP (M).
Marking:
Delabie on cover
Installation Requirements:
R001 R010 R040
Model:
734100, 735400, 735447 & 73544715
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1907015

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a single sequential cartridge that controls both the flow and temperature with a single lever operating member. The spout outlets incorporate a plastic flow straightener. All products are supplied with a plastic strainer and a servicing valve, x2 EPDM ‘O’-rings, brass adaptor, plastic flow regulator and brass flow regulator holder for installation on each inlet tail. The models ending in 610/610L are supplied with copper tails and an additional olive. All other models are supplied with stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections and an additional fibre washer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907015
Expiry date:
31/07/2024
Size:
½” BSP (M) (to servicing valve)
Marking:
Delabie on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
Securitherm H9600, H9600610, H9600610L, H960015 & H960015L. Securitherm Bioclip H9605, H9605610, H9605610L, H960515 & H960515L
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1910701

Range of thermostatic blending valves (chromium plated or nickel plated brass). Both inlets incorporate a plastic strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1910701
Expiry date:
31/10/2024
Size:
15mm compression
Marking:
Delabie and Nano on top of body
Installation Requirements:
R001 R010 R040
Model:
Premix Nano 732115 & Premix Nano 732116
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1909042

SECURITOUCH range of wall mounted two hole, single outlet mixer taps with swivel spouts (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The outlets incorporate a plastic flow straightener. Some of the models have flow control features in the offset unions. Model 2445EPS incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909042
Expiry date:
30/09/2024
Size:
¾” to ½” offset unions
Marking:
DELABIE on operating member
Installation Requirements:
R001 R010 R040
Model:
2445 SECURITOUCH, 2445L SECURITOUCH, 2445EP SECURITOUCH, 2445LEP SECURITOUCH, 2445S SECURITOUCH, 2445LS SECURITOUCH, 2445EPS SECURITOUCH, 2445LEPS SECURITOUCH.
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1909068

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a single sequential cartridge headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener and the inlets also incorporates metal flow restrictors and a shut off valve. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909068
Expiry date:
30/09/2024
Size:
½” BSP (M)
Marking:
Delabie on operating member.
Installation Requirements:
R001 R010 R040
Model:
Securitouch Range: 2436p & 2436.
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1910061

Range of wall mounted, two hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a single sequential thermostatic cartridge controlling both flow and temperature with a single lever operating member. The spout outlet incorporates a plastic flow straightener and is removable for hygiene purposes. The inlets into the main body both incorporate a plastic filter and a plastic flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1910061
Expiry date:
31/10/2024
Size:
½” BSP (M).
Marking:
Delabie on operating member.
Installation Requirements:
R001 R010 R040
Model:
H9611P & H9614P
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1910062

Deck mounted, two hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a single sequential thermostatic cartridge controlling both flow and temperature with a single lever operating member. The spout outlet incorporates a plastic flow straightener and is removable for hygiene purposes. The inlets into the main body both incorporate a plastic filter and a plastic flow regulator. The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1910062
Expiry date:
31/10/2024
Size:
½” BSP (M).
Marking:
Delabie on operating member.
Installation Requirements:
R001 R006 R010
Model:
H9615.
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1912028

A range of self-closing taps chromium plated brass). Model 312QU1 incorporates a stainless-steel filter on the outlet. Model 311QU1 incorporates a stainless-steel spout. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
1912028
Expiry date:
31/12/2024
Size:
3/8” BSP (M)
Marking:
Delabie on operating member
Installation Requirements:
R001 R006
Model:
311QU1 & 312QU1
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.