Dolphin Solutions Ltd Approvals


#1911347

Range of wall mounted two hole thermostatic blending valves having brass bodies (various finishes). Incorporating a 2 way ceramic disc diverter (2 on, 1 off) flow control which also diverts the flow from a shower to shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type or lever type operating members. Inlets incorporates approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1911347
Expiry date:
30/11/2024
Size:
½” BSP (F)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R010 R040
Model:
DB3100.x(.xx) DB3101.x(.xx) DB3200.x(.xx) DB3201.x(.xx) Where .x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 brushed/satin polished, .2 to mirror polished, .3 brushed/satin polished with PVD coating, .4 mirror polished with PVD coating .5 powder coated. .6 - .9 other material and finish options that may be available in the future. So for example DB3100.1 is brushed/satin polished finish. The suffix (.xx),.3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3100.3.50 is brushed/satin polished with Gold PVD coating.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003342

Range of shower heads incorporating stainless steel bodies (various finishes) and silicone rubber nozzles. The inlet incorporates a flow regulator and a swivel connection. Maximum operating temperature 45°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2003342
Expiry date:
31/03/2025
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
DB3001.x(.xx) Dolphin Blue Stainless Steel Slimline Shower Head 250x250 Round DB3002.x(.xx) Dolphin Blue Stainless Steel Slimline Shower Head ø250 Square ‘x’ denotes the finish and is replaced with: 1 = brushed/satin polished. 2 = mirror polished. 3 = brushed/satin polished with PVD coating. 4 = mirror polished with PVD coating. 5 = powder coating. 9 – other finishes that may be available in the future. ‘xx’ only applies to products with a PVD coating, denotes the colour of the PVD and is replaced with numbers between 00 and 99.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003347

Range of shower heads having stainless steel bodies (various finishes, see model) and silicone rubber nozzles. The inlet incorporates a flow regulator. Maximum operating temperature 65°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2003347
Expiry date:
31/03/2025
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
DB3000.x(.xx) Where .x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating & .5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. And .xx denotes finish and can be replaced by: (.xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix .3 to .5 is used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003357

Wall mounted shower outlet elbow (various finishes) and shower handset holder, incorporating EPDM ‘O’-rings. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2003357
Expiry date:
31/03/2025
Note:
Open outlet use only. This approval does not include a shower hose and handset.
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
DB3070.x.xx Where .x denotes finish and can be replaced by: .1 - brushed/satin polished, .2 - mirror polished, .3 - brushed/satin polished with PVD coating, .4 - mirror polished with PVD coating & .5 - powder coated. .6 - .9 to denote other material and finish options that may be available in the future. .xx denotes finish colour and can be replaced by: 00-99 to denote the colour of PVD or powder coat. This suffix is only applicable where the previous suffix for .x = .3, .4 or .5.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003371

Range of ceiling or wall mounted shower arms having brass bodies in various finishes. Open outlet use only. Maximum operating temperature 65°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2003371
Expiry date:
31/03/2025
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
Ceiling mounted range DB3060.200.x(.xx) DB3060.250.x(.xx) DB3060.300.x(.xx) Wall mounted range DB3061.300.x(.xx) DB3061.350.x(.xx) DB3061.400.x(.xx) DB3061.450.x(.xx) DB3062.300.x(.xx) DB3062.350.x(.xx) DB3062.400.x(.xx) DB3062.450.x(.xx) Where x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating .5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. And xx can be replaced by: .3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#1911066

Range of shower outlets (chromium plated brass) incorporating a flow regulator. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1911066
Expiry date:
30/11/2024
Note:
Open outlet use only.
Size:
see model
Marking:
Dolphin on body
Installation Requirements:
R001 r040
Model:
DB1031x-y – ½” BSP (F) DB1032x-y – 15mm compression X denotes the finish: C = mirror polished chrome plate, S = satin polished nickel plate with lacquer, S-2 = satin polished chrome plate Y denotes the decorative coating and colour
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2009321

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlet incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009321
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (D with a dolphin) on Body
Installation Requirements:
R001 R006
Model:
DSaaa.bbb.ccc.d.ee Where ‘aaa’ denotes the style type, the following options are available: DS211 - 90° bent spout DS213 - 55° bent spout Where ‘bbb’ denotes the vertical height of the spout in mm. Range 125mm - 225mm in 25mm increments. Where ‘ccc’ denotes the horizontal length (projection) of the spout in mm. Range 125mm – 225mm in 25mm increments. Where ‘d’ denotes the material finish, the following options are available: 1 - brushed satin, 2 - mirror polished, 3 - PVD satin, 4 - PVD mirror polished or 5 - powder coated. Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2009320

Range of wall mounted, electronically operated combination tap assemblies (various finishes, see model ) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlets incorporate a aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009320
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (D with a dolphin) on body
Installation Requirements:
R001 R040
Model:
DSaaa.bbb.c.dd Where ‘aaa’ denotes the style type, the following options are available: DS111 - 90° bent spout, DS112 - 90° bent spout with wall plate fixing kit, DS113 - 55° bent spout or DS114 - 55° bent spout with wall plate fixing kit. Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 100mm - 275mm in 25mm increments. Where ‘c’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2106334

Dolphin Blue Flexi hose range of wall outlets and brackets incorporating stainless steel bodies (various finishes) and EPDM ‘O’-rings. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2106334
Expiry date:
30/06/2026
Size:
½” BSP (M)
Marking:
Dolphin logo (D) on body.
Installation Requirements:
R001 R040
Model:
DB3071.x(.xx) The suffix .x in the above codes – DB3071.x(.xx) - will be a number 1 - .5 to denote the finish: 1 to denote brushed/satin polished, 2 to denote mirror polished, 3 to denote brushed/satin polished with PVD coating, 4 to denote mirror polished with PVD coating 5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. The suffix (.xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix .3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3071.3.50 is brushed/satin polished with Gold PVD coating.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2106335

Dolphin Blue range of handheld shower outlets with a stainless bodies (various finishes) and EPDM ‘O’-rings. The inlet incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2106335
Expiry date:
30/06/2026
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Dolphin logo (D) on body.
Installation Requirements:
R001 R040
Model:
DB3020.x(.xx) The suffix x in the above codes – DB3020.x(.xx) - will be a number 1 - 5 to denote the finish: 1 to denote brushed/satin polished, 2 to denote mirror polished, 3 to denote brushed/satin polished with PVD coating, 4 to denote mirror polished with PVD coating 5 to denote powder coated. 6 - 9 to denote other material and finish options that may be available in the future. The suffix (xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix 3 to 5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3020.3.50 is brushed/satin polished with Gold PVD coating.
Approval Holder:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.