Roper Rhodes Ltd Approvals


#2104069

Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The DC3002 & DC3007 prefix models incorporate a 2-way ceramic disc diverter headwork with dome (DC3001 models) or cubed type (DC3006 & DC3007 models) operating members controlling the flow either shower outlet. The DC3001 model incorporate a ¼ turn ceramic disc headwork with dome (DC3001 & DC3002 models) or cubed type (DC3006 & DC3007 models) operating members controlling the flow to a single shower outlet. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104069
Expiry date:
30/04/2026
Note:
This approval does not include a shower hose and handset, or overhead shower.
Size:
¾” BSP (F)
Marking:
R2 "BRAND OF ROPER RHODES" on rear of body.
Installation Requirements:
R001 R010 R040
Model:
DC3001 (1 OUTLET), DC3002 (2 OUTLET), DC3006 (1 OUTLET) & DC3007 (2 OUTLET) THERMOSTATIC SHOWER MIXING VALVES SVSET171, SVSET172, SVSET166, SVSET167, SVSET168 & SVSET169 THERMOSTATIC SHOWER MIXING VALVES added 25/04/2023
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#1907408

Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ceramic disc headworks, the top outlet is controlled by a ¼ turn ceramic disc, the bottom outlets are controlled by a 2 way shower to shower ceramic disc diverter headwork. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome, single lever, cross top or cube type operating members. The inlets each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907408
Expiry date:
31/07/2024
Note:
This approval does not include a shower hose and handset, or overhead shower. The valve body is not approved in its own right.
Size:
½” BSP (F)
Marking:
Roper Rhodes on face plate
Installation Requirements:
R001 R010 R040
Model:
lever and cube type operating member). THERMOSTATIC SHOWER BLENDING VALVE (BODY ONLY) WHICH MUST BE INSTALLED IN CONJUNCTION WITH THE FOLLOWING TRIM SETS: SV3906, SV3915, SVSET151, SVSET152, SV4006, SVSET153, SMT1611, SMT1612, SZN1611, SCM1611, SV3919 1/2", SVSET173 1/2", SV4015 1/2", SVSET165 1/2", SV4019 1/2", SVSET174 1/2", SVSET186 ½”, SVSET187 ½”, SVSET188 ½”, SVSET189 ½”, SVSET190 ½”, SVSET191 ½”, SVSET192 ½”, SVSET193 ½” & SVSET194 ½”
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2204072

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener (TR1027 and TR1005 models) or a plastic aerator (all other models). The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2204072
Expiry date:
30/04/2027
Size:
¾” BSP (M)
Marking:
R2 (Brand of Rhoper Rhodes) on rear of tap body
Installation Requirements:
R001 R006 R010
Model:
TR1019/ERGO MOUNTED BATH FILLER (Chrome plated). TR1023/FUSE DECK MOUNTED BATH FILLER (Chrome plated). TR1027/CREW DECK MOUNTED BATH FILLER (Chrome plated). TR1005/JOY DECK MOUNTED BATH FILLER (Chrome plated). Models added Sept 2022: TR1092/ERGO MOUNTED BATH FILLER (Black finish). TR1104/ERGO DECK MOUNTED BATH FILLER (Brass effect finish). TR1098/FUSE MOUNTED BATH FILLER (Black finish). TR1110/FUSE DECK MOUNTED BATH FILLER (Brass effect finish).
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207086

Range of concealed thermostatic valves with thermostatic cartridges. Some models include diver between outlets. (See model codes) All models incorporate cube, dome, cross-top or single lever type operating members. The inlets incorporate stainless steel strainers and single check valve cartridges; however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2207086
Expiry date:
31/07/2027
Size:
1/2" or ¾” BSP (F)
Marking:
Roper Rhodes on nut. Roper Rhodes on faceplate of 1/2" Tavistock (brand of Roper Rhodes) on headwork of 3/4"
Installation Requirements:
R001 R020
Model:
Models with two-way diverter SV4004 SV400403 SV400404 SV3906 SVSET151 SV3915 SVSET152 SV3919 SVSET173 SV4006 SVSET153 SV4015 SVSET165 SV4019 SVSET174 SMT1611 SMT1612 SMT1613 SZN1611 SZN1612 SZN1613 SCM1611 SLD1601 SLD1602 SQT1611 SQT1612 SQT1613 SND1610 SND1611 SND1612 SQT1614 SQT1615 SQT1616 SQT1617 SQT1618 SQT1619 SQT1620 SQT1621 SQT1622 SND1613 SND1614 SND1615 SCM1612 SLD1603 SLD1604 SVSET186 SVSET187 SVSET188 SVSET189 SVSET190 SVSET191 SVSET192 SVSET193 SVSET194
Without diverter SVSET183 SVSET184 SVSET185 SVSET198 SVSET199 SVSET200 SV3904 SV390403 SV390404 SVSET195 SVSET196 SVSET197 SVSET201 SVSET202 SVSET203 SV3909 SV390903 SV390904 SV4009 SV400903 SV400904
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207046

Range of WC flushing cisterns incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207046
Expiry date:
31/07/2027
Size:
½” BSP (F)
Marking:
Roper Rhodes and models number on label on front of cistern. 6 Litre inside.
Installation Requirements:
R001 R556 R571 R581
Model:
TR9009 TR9005 TR9015
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207048

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207048
Expiry date:
31/07/2027
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R280 R556 R571 R581 R001
Model:
TR9008.
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207049

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207049
Expiry date:
31/07/2027
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Model:
TR9002
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2212090

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener (TR1025 and TR1026 models) or a plastic aerator (all other models). The products are supplied with or without a click type pop-up waste (see model). Maximum operating pressure: MINI models 10.0 bar, all other models 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212090
Expiry date:
31/12/2027
Size:
Stainless-steel braided EPDM lined flexible hose assemblies incorporating 15mm compression end connections.
Marking:
R2 (brand of Roper Rhodes) on rear of body.
Installation Requirements:
R001 R006 R010
Model:
TR1017/ERGO BASIN MIXER WITH CLICK WASTE, TR1018/ERGO MINI BASIN MIXER WITH CLICK WASTE, TR1021/FUSE BASIN MIXER WITH CLICK WASTE, TR1022/FUSE MINI BASIN MIXER WITH CLICK WASTE, TR1025/CREW BASIN MIXER WITH CLICK WASTE, TR1026/CREW MINI BASIN MIXER WITH CLICK WASTE, TR1016/JOY TALL BASIN MIXER WITHOUT CLICK WASTE, TR1062/JOY BASIN MIXER WITHOUT CLICK WASTE. Models added 19/04/2023 TR1089 Ergo Basin Mixer Black Single hole basin mixer TR1090 Ergo Mini Basin Mixer Black Single hole basin mixer TR1101 Ergo Basin Mixer Brass Single hole basin mixer TR1102 Ergo Mini Basin Mixer Brass Single hole basin mixer TR1095 Fuse Basin Mixer Black Single hole basin mixer TR1096 Fuse Mini Basin Mixer Black Single hole basin mixer TR1107 Fuse Basin Mixer Brass Single hole basin mixer TR1108 Fuse Mini Basin Mixer Brass Single hole basin mixer
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2301072

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301072
Expiry date:
31/01/2028
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Model:
TR9001 / VOR790/ INST13001
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2305059

Range of two-hole, single outlet, fixed combination tap assembles (chrome plated brass bodies). Incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlets incorporate plastic aerators or flow straightener and supplied with metal backnuts. The products are supplied with a shower hose and handset. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2305059
Expiry date:
31/05/2028
Size:
¾” BSP (M)
Marking:
R2 (brand of Roper Rhodes) on leg.
Installation Requirements:
R001 R006 R030
Model:
TR1024 TR1028
Factor:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.