Noken Design S.A.U Approvals


#1907370

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a dome type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1907370
Expiry date:
31/07/2024
Note:
The 100190229 – N109390074 concealed part is not approved in its own right.
Size:
½” BSP (F)
Marking:
Porcelanosa on spout face plate.
Installation Requirements:
R001 R010 R040
Model:
100190229 – N109390074 concealed part for use with external trim parts: 100184778 – N109390069 (square spout) & 100190226 – N109390072 (round spout).
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#1910012

Range of single hole, single outlet (fixed) combination tap assemblies (black or chromium plated brass) incorporating a ceramic cartridge headwork with, single lever operating member. The spout outlet incorporates a plastic aerator. The 100208340 & 100208350 models are supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910012
Expiry date:
31/10/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided, PEX lined flexible hose assemblies with ⅜” captive nut end connections and EPDM rubber washers.
Marking:
NK Porcelanosa on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
100208340,100208350,100208352,100208353,100208354, 100208355,100208362 & 100208373.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#1910039

Range of single hole single outlet floor mounted bath taps with chromium plated brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a combined plastic aerator and plastic flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910039
Expiry date:
31/10/2024
Size:
12.7mm Spigot.
Marking:
NK Porcelanosa on operating member.
Installation Requirements:
R001 R010 R040
Model:
100208363 (Black) 100208374 (Chrome)
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2004361

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated or matt black brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0503 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
WRAS Approval Number:
2004361
Expiry date:
30/04/2025
Note:
This approval does not include a shower hose and handset.
Size:
¾” BSP (M)
Marking:
WRAS & nk Porcelanosa on body.
Installation Requirements:
R001 R006 R030
Model:
100284623, 100284640, 100259573 & 100284598 COMBINATION TAP ASSEMBLIES
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2010300

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Model 1002137653_N199998998 is supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010300
Expiry date:
31/10/2025
Note:
No testing performed on the pop-up waste.
Size:
Stainless steel braided EPDM lined hose assemblies with 3/8” captive nut end connections.
Marking:
NK Porcelanosa on operating member
Installation Requirements:
R001 R006 R010
Model:
100237653_N199998998 100237663_N199999000
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2010304

Range of single hole, single outlet (fixed) combination tap assemblies (in black or chrome finishes) with brass bodies. Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010304
Expiry date:
31/10/2025
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
NK Porcelanosa onoperating member.
Installation Requirements:
R001 R006 R009 R010
Model:
100263947 N199998927. 100263999 N199998926. 100264005 N199998925. 100264006 N199998924. 100263976 N199998923. 100264003 N199998922.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2012355

Wall mounted thermostatic shower mixer incorporating a chromium plated brass body and ceramic disc headwork with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which has a manual override button. The inlets incorporate a single check valve cartridge (however the complete assembly has not been tested to demonstrate they provide adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2012355
Expiry date:
31/12/2025
Note:
Shower hose and handset is not provided as part of this approval.
Size:
¾” BSP (F)
Marking:
NK Porcelanosa on body
Installation Requirements:
R001 R010 R040
Model:
100095514-N199999700 Smart
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2104326

Range of shower arms and brackets with brass bodies (various finishes). Shower brackets incorporate single check valves cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2104326
Expiry date:
30/04/2026
Note:
Open outlet use only.
Size:
½” BSP(M)
Marking:
NK Porcelanosa on backing plate.
Installation Requirements:
R001 R040
Model:
Wall brackets: 100213266 N629321403 100039121 N198490001 100064216 N199999973 100038631 N158490001 Shower arms: 100063878 N192579908 100146670 N192579950 100090331 N192579919 100090332 N192579918 100213248 N807993290 100039088 N192452301
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2104325

Range of overhead shower outlets incorporating brass bodies (chrome plated) and EPDM gaskets. Inlets have stainless filters incorporated within a ball joint. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2104325
Expiry date:
30/04/2026
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
NK Porcelanosa on body.
Installation Requirements:
R001 R040
Model:
INOX Mirror range: 100251806-N200000046 100266472-N186490043 100266413-N186490041 100266447-N186490040 100266453-N185709923 100266462-N185709922 Models added July 2023: 100323258-N186490401 100323239-N186490402 100323238-N200000457 100323259-N200000455
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2109324

Range of shower outlets and shower handsets. The shower heads have a brass body and ball joint, NBR ‘O’-ring, stainless-steel strainer and silicon nozzles. The shower handset has a brass body, NBR ‘O’-rings, silicon nozzles and incorporate a plastic flow regulator on the inlet. Model ‘100274774 N200000068’ is supplied with a double interlocked hose and a single check valve cartridge (to be installed on the inlet to the hose) however the complete product has not been fully tested to demonstrate it provides backflow protection. Model ‘100274774 N200000068’ has a maximum operating temperature of 60°C. All other models have a maximum operating temperature of 85°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2109324
Expiry date:
30/09/2026
Size:
½” BSP (F) or ½” BSP (M)
Marking:
NK Porcelanosa on body.
Installation Requirements:
R001 R040
Model:
Shower outlets: 100213249 N192579955. 100090355 N192579923. 100090329 N192579916. Shower handsets: 100213256 N629321404. 100040325 N299274701. 100274774 N200000068.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.