Methven UK Approvals


#2003382

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003382
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC ON REAR OF TAP DEVA ON FRONT OF TAP
Installation Requirements:
R001 R006 R010
Model:
SENSOR6/BT COMBINATION TAP ASSEMBLIES
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2006075

Single hole, single outlet combination tap assembly (chromium plated brass) incorporating a sequential headworks with single lever operating member to control both the flow and temperature. The outlet incorporates a plastic flow straightener. The product also incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006075
Expiry date:
30/06/2025
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with a ½” BSP (F) captive nut end connection with a ½” BSP (M) to 15mm compression adaptor.
Marking:
DEVA ON OPERATING MEMBER DTC10 ON BODY
Installation Requirements:
R001 R006 R010
Model:
SOL003
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2104801

Wall mounted two hole, double outlet (swivel) combination tap assembly (chromium plated brass) with quarter turn ceramic disc headworks and single lever type operating members. The product is supplied with plastic back nuts. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0570 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, double outlet, swivel.
WRAS Approval Number:
2104801
Expiry date:
30/04/2026
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Model:
DLV305WM
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2105800

Range of wall mounted shower kit with brass bodies (various finishes) consisting of a shower rail with an overhead shower rose, incorporating a manual diverter to shower handset. Shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models AOOSCPUK and AOOSBKUK consist of just a shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2105800
Expiry date:
31/05/2026
Size:
See model.
Marking:
Methven on shower handset.
Installation Requirements:
R001 R040
Model:
AIO Overhead Shower CP AOOSCPUK – ½” BSP (F) inlet AOOSBKUK – ½” BSP (F) inlet AIO Shower System CP AOSSCPUK – ½” BSP (M) inlet AOSSBKUK – ½” BSP (M) inlet
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#1912075

Range of wall mounted, two-hole, thermostatic shower valves (chromium plated brass). In models X-KESCT, KESVAL, VISVAL, WISVAL, X-WCT & CTBV01 flow is controlled via a quarter turn ceramic disc headwork with dome or cube operating members. In models 269922, CTBV02, X205112CP, MCTS VO, X-CTBVEF, X-MCT & CTBV03 flow is controlled via a half turn ceramic disc headwork with dome or cube operating members. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1912075
Expiry date:
31/12/2024
Size:
¾" BSP captive nut inlets x ½" BSP (M) outlet
Marking:
DTC37 & METHVEN ON BODY
Installation Requirements:
R001 R010 R040
Model:
X-KESCT, KESVAL, VISVAL, WISVAL, MCTS VO, X-CTBVEF, X-MCT, CTBV03, 269922, CTBV02, X205112CP, X-WCT & CTBV01 thermostatic shower valves
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2011329

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2011329
Expiry date:
30/11/2025
Size:
½” BSP (F).
Marking:
Methven on operating member.
Installation Requirements:
R001 R010 R040
Model:
WAI range: WAIWMBCP WAIWMBBB WAIWMBBK WAIWMBBN WAIWMBGM WAIWMBFCP WAIWMBFBB WAIWMBFBK WAIWMBFBN WAIWMBFGM
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#1905094

Range of shower handsets The shower handset incorporates a plastic flow regulator on the inlet. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1905094
Expiry date:
31/05/2024
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
Methven on base of shower handset.
Installation Requirements:
R001
Model:
VJHS01CP, VJHS01BK, VJHS01GM, VJHS01BB & VJHS01BN SHOWER HANDSETS
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#1907403

Range of wall mounted bar type thermostatic bath shower mixers (brass bodies available with a variety of finishes). Incorporating a half turn ceramic disc or non-rising spindle headwork controlling the flow with a dome type operating member and a lockable self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. The spout outlet incorporates a plastic flow straightener and a stainless steel mesh. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
1907403
Expiry date:
31/07/2024
Size:
¾” BSP(F) captive nut.
Marking:
METHVEN DTC14 On body.
Installation Requirements:
R001 R020
Model:
KLTV106WMBO THERMOSTATIC SHOWER MIXERS (ceramic disc headwork)
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2104901

Range of shower handsets incorporating chromium plated plastic or chromium plated brass bodies (see model). Inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2104901
Expiry date:
30/04/2026
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Methven on body (models SJKRHS01CP, SJKRHS01BK, SJKRHS01BN, SJKRHS01BB, SJKRHS01GM). Methven on body & Satinjet on shower face (models SJWHS01CP, SJWHS01BK, SJWHS01BB, SJWHS01BN, SJWHS01GM)
Installation Requirements:
R001 R040
Model:
Kiri MK2 range (brass bodies): SJKRHS01CP SJKRHS01BK SJKRHS01BN SJKRHS01BB SJKRHS01GM Waipori range (plastic bodies) SJWHS01CP SJWHS01BK SJWHS01BB SJWHS01BN SJWHS01GM Finishes: CP - Chrome plated BK - Black matte plated BN - Brushed nickel plated BB - Brushed brass plated GM - Gunmetal plated
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval


#2104906

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a T-Type thermostatic mixing valve. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2104906
Expiry date:
30/04/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DTC32A (brand of Methven) on rear of body. Deva (brand of Methven) on operating member DTC58 (brand of Methven) on TMV
Installation Requirements:
R001 R010 R020
Model:
SOL004T
Factor:
Methven UK
Company Name
Methven UK
Address
Brooklands Mill English Street Leigh
Postcode
WN7 3EH
Phone
08001951602
General Email
sales@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.