Wolseley Approvals


#1906904

single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type members. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste, supplied with a plastic flow regulator, intended for installation at the inlets. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906904
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
Marking:
SWAN LOGO (brand of wolseley) ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
C58106
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1911901

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911901
Expiry date:
30/11/2024
Size:
15mm copper inlet tails
Marking:
SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
C58123
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1907913

Range of two hole single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907913
Expiry date:
31/07/2024
Size:
1/2" BSP (M)
Marking:
'SWAN' logo on operating member
Installation Requirements:
R001 R006 R010
Model:
C58119
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1907066

Range of Saracen concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets of model 171678 & 171679 incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907066
Expiry date:
31/07/2024
Size:
See model
Marking:
SARACEN, WRAS & TMV ON CAP SARACEN & STMV23 ON BODY
Installation Requirements:
R001 R010 R040
Model:
15mm & 22mm compression: 171676, 171677, 171678 & 171679
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1907067

Range of pillar taps (chromium plated brass). Incorporating either a non-rising spindle (C48109 & C48100) or quarter turn ceramic disc (C48115) headworks with a variety of operating members. The spout outlets incorporate a plastic flow straightener & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1907067
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
SWAN LOGO ON INDICE
Installation Requirements:
R001 R005
Model:
C48109, C48100 & C48115
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1907068

Range of pillar taps (chromium plated brass) incorporating either a non-rising spindle (C48112, C48103) or quarter turn ceramic disc (C48118) headwork with a variety of operating members (see model). The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1907068
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
SWAN LOGO ON INDICE
Installation Requirements:
R001 R006
Model:
C48112, C48103 & C48118
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1906124

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate a stainless strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1906124
Expiry date:
30/06/2024
Size:
¾” BSP (M)
Marking:
NABIS (BRAND OF WOLSELEY) ON TOP OF MIXER BODY
Installation Requirements:
R001 R006 R020
Model:
A05040 NAB
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1906122

Model A05058 is an overhead shower outlet. Models A05045 & A05046 are shower handsets with chromium plated ABS bodies. Maximum operating temperature 80ºC.

Section:
1650 Shower Outlets
WRAS Approval Number:
1906122
Expiry date:
30/06/2024
Note:
Open outlet use only
Size:
½ BSP (M) or ½ BSP (F)
Marking:
CENTER LOGO (BRAND OF WOLSELEY) ON BASE OF HANDSET
Installation Requirements:
R001 R040
Model:
A05045, A05046, A05058 & A05059
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1906123

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906123
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.
Marking:
NABIS ON OPERATING MEMBER NABIS ON INDICE ON MODEL B0819 ONLY
Installation Requirements:
R001 R006 R010
Model:
B08927, B08923 & B08917
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1912704

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc and single lever operating members (C48122 model) or non-rising spindle headworks (C48108 & C48106 models) with either cross top (C48106 model) or dome type (C48108 model) operating members. The spout outlet incorporates a plastic aerator or a flow straightener, supplied with both. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912704
Expiry date:
31/12/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
SWAN BRAND OF WOLSELEY ON INDICE
Installation Requirements:
R001 R006 R010
Model:
C48108 SWAN STANDARD DC BASIN C48122 SWAN 1/4 TURN LEVER MONO BASIN C48106 SWAN STANDARD DC BASIN
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.