Range of single hole, single outlet (swivel) combination tap assemblies incorporating a brass body (chrome, nickel or black finish) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006076

Marking:

COOKE & LEWIS (BRAND OF KINGFISHER) & DATE OF MANUFACTURE MM/YYYY ON OPERATING MEMBER

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2025

Model:

3663602482123 ARUVI SINGLE LEVER KITCHEN TAP, 3663602482208 GULLFOSS FOLDING KITCHEN MIXER TAP CHROME, 3663602482161 ARYA SINGLE LEVER KITCHEN TAP CHROME, 3663602482178 ARYA SINGLE LEVER KITCHEN TAP B.NICKEL 3663602482130 FARIN SPRING NECK KITCHEN TAP CHROME, 3663602482154 FARIN SPRING NECK KITCHEN TAP CHROME BK 3663602482147 FARIN SPRING NECK KITCHEN TAP B NICKEL

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2006079

Size:

6mm – 54mm.

Marking:

FLOMASTA (BRAND OF KINGFISHER) & size on body.

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

5001, 5002, 5040, 5041, 5090, 5092, 5085, 5086, 5270, 5301, 5240, 5243, 5130, 5130R, 5060, 5062, 5063, 5064, 5065 & 5270S, L5090.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2006078

Size:

8mm – 54mm 3/8” – 2”

Marking:

FLOMASTA (BRAND OF KINGFISHER) & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

SR5270, SR5090, SR5092, SR5301,SR5240, SR5243, SR5040, SR5041, SR5130, SR5130R, SR5062, SR5063, SR5271, SR5085, SR5086, SR5270S. All fittings are for use with copper pipe to EN 1057.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007079

Size:

See model

Marking:

Size and Flomasta on body

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of single-hole, single outlet (swivel) combination tap assembly (gold plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and trigger mechanism that changes the water pattern for straight flow to spray. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2003084

Size:

Grey polymeric braided PEX lined hose assemblies incorporating ½” BSP captive nut end connection and washer incorporating a stainless steel strainer.

Marking:

Kingfisher good home logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/03/2025

Model:

3663602481966 COMBINATION TAP ASSEMBLIES Models added July 2021: 5059340504469 & 5059340504421

Product Images

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a ceramic cartridge or quarter turn ceramic disc headwork with a single lever or hand wheel operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004066

Size:

Grey polymeric PEX lined flexible hose assemblies with 1/2" captive nut end connections.

Marking:

Kingfisher good home logo on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

3663602481881, 3663602481898, 3663602481928, 3663602481904, 3663602481911, 3663602481942, 3663602481959 & 3663602481973 COMBINATION TAP ASSEMBLIES Model added July 2021: 5059340504506

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Single hole, single outlet (swivel nozzle) tap (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0410 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap with a single outlet swivel spout with swivel nozzle.

WRAS Approval Number:

2004067

Size:

Stainless steel braided or nylon braided PEX lined hose assemblies with ½” BSP captive nut end connections.

Marking:

Kingfisher good home logo on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2025

Model:

3663602300229 COMBINATION TAP ASSEMBLY Model added Dec 2021: 5059340185446

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011363

Size:

See model.

Marking:

Flomasta and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

'Flomasta Qual-PEX Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2009547

Expiry date:

30/09/2025

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly with a brass body (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a waterfall design. The inlets incorporate plastic flow restrictors. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2104065

Size:

¾” BSP (M)

Marking:

WATERSMITH ON FRONT OF TAP BODY

Installation Requirements:

R001 R006 R160

Expiry date:

30/04/2026

Model:

9514P COMBINATION TAP ASSEMBLY

Product Images

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company