WOLSELEY Approvals


WRAS Approval Number: 1811061

Single hole, single outlet combination tap assembly (chromium plated brass) with a pull-down spray outlet, incorporating ¼ turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The tap body incorporates a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1811061
  • Expiry date: 30/11/2023
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: NABIS ON OPERATING MEMBER
  • Installation Requirements R001 R006 R010
  • Model
    B08929
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901704

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70˚C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1901704
  • Expiry date: 31/01/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: NABIS ON FRONT OF TAP BODY
  • Installation Requirements R001 R006 r010
  • Model
    B08915 MATESE
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810112

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. incorporates a stainless steel strainer on the spout outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810112
  • Expiry date: 31/10/2023
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: NABIS ON OPERATING MEMBER
  • Installation Requirements R001 R006 R010
  • Model
    B08926 IDRO
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710183

Range of magnetic, electrolytic or combined magnetic & electrolytic scale inhibitors incorporating nickel plated copper bodies. Maximum working pressure 12.0 bar. Cold water use only.

Print This Approval


WRAS Approval Number: 1806086

JET Range of expansion vessels with epoxy coated steel bodies, either stainless steel or mild steel (polypropylene coated) counter-flanges and EPDM diaphragms. Maximum working pressure is either 8.0 bar (S04919 or 10.0 bar (S04920 & S04921) Maximum operating temperature is either 70°C (S04919) or 100°C (S04920 & S04921).

  • Section: 1000 Expansion Vessels
  • WRAS Approval Number: 1806086
  • Expiry date: 30/06/2023
  • Note: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
  • Size: 2” BSP (F) (S04919) 2½” BSP (F) S04920 & S04921)
  • Marking: JET, MODEL, CAPACITY, CE, TEMP & DATE OF MANUFACTURE MM/YY ON ADHESIVE LABEL ON BODY
  • Installation Requirements R001
  • Model
    S04919 JET750, S04920 JET1000 & S04921 JET1500
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909907

Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a two way ceramic disc diverting the flow between two shower outlets, temperature is controlled independently by a thermostatic cartridge with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a fixed over head shower, hose and headset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1909907
  • Expiry date: 30/09/2024
  • Size: ½” X ¾” off set unions
  • Marking: WRAS SOLEX on rear of body
  • Installation Requirements R001 R040
  • Model
    D01193
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909909

Rang of pillar taps (chrome plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1909909
  • Expiry date: 30/09/2024
  • Size: SEE MODEL
  • Marking: SWAN LOGO on operating member
  • Installation Requirements R001 R005
  • Model
    C58116 - ¾” BSP (M) C58115- ½” BSP (M)
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909910

Two hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quaterter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1909910
  • Expiry date: 30/09/2024
  • Size: ¾” BSP (M)
  • Marking: SWAN LOGO ON OPERATING MEMBER
  • Installation Requirements R001 R005 R010
  • Model
    C58120
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909099

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The products are supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1909099
  • Expiry date: 30/09/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
  • Marking: NABIS ON OPERATING MEMBER
  • Installation Requirements R001 R006 R010
  • Model
    A05028 NABIS BASIN MIXER
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610108

JET range of water meters with either ductile iron (171277 model) or brass (171273, 171274, 171275, 171276, 171278 & 171279 models) red epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

  • Section: 1505 Water Meters
  • WRAS Approval Number: 1610108
  • Expiry date: 31/10/2021
  • Size: 171273, 171274, 171275, 171276, 171278 & 171279 models: ½”, ¾”, 1¼” BSP (M). 171277 model: DN 50 (flanged connection).
  • Marking: JET, WOLSELEY, CE, WRAS & PRODUCT INFORMATION ON DIAL FLOW ARROW & SIZE ON BODY
  • Installation Requirements R001
  • Model
    171273, 171274, 171275, 171276, 171277, 171278 & 171279
  • Factor: WOLSELEY
    Company Name
    WOLSELEY
    Address
    KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
    Postcode
    CV34 6DY
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3