Bristan Group Ltd. Approvals


WRAS Approval Number: 1607001

Range of basin pillar taps (chromium plated brass) incorporating a quarter turn ceramic disc headwork with lever type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1607001
  • Expiry date: 31/07/2021
  • Note: IRN R005 applies to J ¾ C, OR ¾ C, PS ¾ C & SM ¾ C
  • Size: ½” or ¾” BSP (M) inlets.
  • Marking: Bristan on top of operating member.
  • Installation Requirements R001 R005 R006
  • Model
    J ½ C, J ¾ C, OR ½ C, OR ¾ C, PS ½ C, PS ¾ C, SM ½ C & SM ¾ C.
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609012

JAVA two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener and stainless steel strainer. The product is supplied with metal backnuts. The inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609012
  • Expiry date: 30/09/2021
  • Size: ¾ BSP Male
  • Marking: Bristan on operating member.
  • Installation Requirements R001 R005
  • Model
    J BF C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609013

QUEST two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609013
  • Expiry date: 30/09/2021
  • Size: ¾” BSP Male
  • Marking: Bristan on operating member.
  • Installation Requirements R001 R010 R006
  • Model
    QST BF C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609014

PISA, SMILE & ORTA two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609014
  • Expiry date: 30/09/2021
  • Size: ¾” BSP Male
  • Marking: Bristan on operating member.
  • Installation Requirements R001 R010 R005
  • Model
    OR BF C, PS BF C & SM BF C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609024

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature with a single lever operating member. The spout outlet incorporates a plastic aerator. Each inlet within the main body incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2) and a plastic flow regulator. Maximum working pressure 5.0 Bar. Maximum working temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609024
  • Expiry date: 30/09/2021
  • Size: 15mm copper tails
  • Marking: Model and FS followed by date of manufacture (MM/YY) on body. Bristan on operating member.
  • Installation Requirements R001 R006
  • Model
    SOLO2-T3LL & SOLO2-T3SL
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609025

Range of single hole, single outlet (swivel) combination tap assemblies (black, white or chromium plated brass), MLB SNK BLK and MLB SNK WHT models incorporate a ceramic cartridge headwork with a single lever operating member, the CHV EFSNK C model incorporates quarter turn ceramic disc headworks with single lever type operating members. The spout outlet incorporates a plastic flow straightener (CHV EFSNK C model) or a plastic aerator (MLB SNK BLK and MLB SNK WHT models). The CHV EFSNK C model is supplied with a 15x15mm compression combined isolation valve and single check valve cartridge (suitable for backflow protection against Fluid Category 2) for installation on each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609025
  • Expiry date: 30/09/2021
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: CHV EFSNK C model: Bristan, easy fit, H followed by date of manufacture (MM/YY) on body. MLB SNK BLK & MLB SNK WHT models: Bristan on operating member. H followed by date of manufacture (MM/YY) on body.
  • Installation Requirements R001 R006 R010
  • Model
    CHV EFSNK C, MLB SNK BLK & MLB SNK WHT
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609060

Single hole single outlet (swivel), combination tap assembly (chromium plated brass) with a ceramic cartridge headwork, single lever operating member & pull-out spray handset. The spout outlet incorporates a plastic aerator/straightener. Inlets incorporate servicing valves. Inlet and outlet hoses incorporate single check valves (suitable for backflow protection against fluid category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609060
  • Expiry date: 30/09/2021
  • Size: Stainless steel braided EPDM lined hose assemblies incorporating 15mm compression end connections.
  • Marking: Bristan on operating member. A letter of the alphabet denoting manufacturer and date of manufacture (MM/YY) on body.
  • Installation Requirements R001 R090
  • Model
    MCD PULLSNK C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610001

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. J BAS C and OR BAS C models are supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1610001
  • Expiry date: 31/10/2021
  • Size: OR BAS C & OR BAS NW C: 15mm copper tails. J BAS C: Stainless steel braided EPDM lined flexible hose assemblies with 15 mm compression end connections.
  • Marking: BRISTAN logo on operating member.
  • Installation Requirements R001 R006 R010
  • Model
    J BAS C, OR BAS C & OR BAS NW C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610002

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1610002
  • Expiry date: 31/10/2021
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with 15mm compression end connections.
  • Marking: BRISTAN logo on operating member.
  • Installation Requirements R001 R006 R010
  • Model
    FRZ BAS C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611001

Wall mounted three hole, single outlet (fixed) combination tap assembly (chromium plated brass) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1611001
  • Expiry date: 30/11/2021
  • Size: 15mm compression
  • Marking: Bristan logo on spout
  • Installation Requirements R001 R010 R040
  • Model
    PIV WMBAS C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    Address
    Birch Coppice Business Park, Pooley Hall Drive, Dordon,
    Postcode
    B78 1SG.
    Phone
    0844 7016274
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 23