StH Westco Ltd Approvals


#1907071

Range of concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907071
Expiry date:
31/07/2024
Size:
See model
Marking:
WESTCO, WRAS & MODEL ON CAP CR & WESTCO ON BODY
Installation Requirements:
R001 R010 R040
Model:
05337 15mm compression 05338 22mm compression
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company

Print This Approval


#1904369

Range of chromium plated, click type pop-up wastes, incorporating a silicone sealing washer.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
1904369
Expiry date:
30/04/2024
Size:
Ø 41.26mm
Marking:
FRANCIS PEGLER ON WASTE OUTLET COLLAR
Installation Requirements:
R001
Model:
C2600300 & C2600300 (FCR)
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company

Print This Approval


#2001075

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001075
Expiry date:
31/01/2025
Size:
Stainless steel braided flexible hose assembly with an EPDM inner hose and ½” BSP captive nut end connectors.
Marking:
Francis Pegler on operating member.
Installation Requirements:
R001 R006 R010
Model:
4S8006
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval


#1907401

Range of spherical servicing valves having either natural (UW24905 models) or nickel plated (UW24809, UW24906, UW249833 & UW24934 models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1907401
Expiry date:
31/07/2024
Size:
See model.
Marking:
WESTCO, WRAS, FLOW ARROW, DATE OF MANUFACTURE MM/YY & SIZE ON BODY WESTCO, SIZE & EN1254-2 ON NUT
Installation Requirements:
R001
Model:
UW24905: 15mm compression. UW24906: 15mm compression. UW24809: ISO valve with handle: 15mm compression. UW24933: Angle Servicing valve: 15mm compression x ½” captive nut. UW24934 :Straight Servicing valve: 15mm compression x ½” captive nut.
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company

Print This Approval


#1912074

Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and a screwdriver operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1912074
Expiry date:
31/12/2024
Size:
22mm compression inlet/outlet
Marking:
WESTCO, WRAS, SIZE, DATE OF MANUFACTURE MM/YY & FLOW ARROW ON BODY WESTCO, SIZE & EN1254-2 ON NUT
Installation Requirements:
R001
Model:
Screwdriver operated. UW24907 (Brass) UW24908 (Nickel plated Brass)
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company

Print This Approval


#1903391

Range of copper crimp fittings with EPDM ‘O’-rings and gasket for use with copper tube. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1903391
Expiry date:
31/03/2024
Size:
See model
Marking:
STH on body. Prior to August 2022 STH & WRAS on body.
Installation Requirements:
R001
Model:
74102 15MM STRAIGHT COUPLING PRESS 74103 22MM STRAIGHT COUPLING PRESS 74104 28MM STRAIGHT COUPLING PRESS 74105 35MM STRAIGHT COUPLING PRESS 74106 42MM STRAIGHT COUPLING PRESS 74107 54MM STRAIGHT COUPLING PRESS 74108 15MM SLIP COUPLING PRESS 74109 22MM SLIP COUPLING PRESS 74110 28MM SLIP COUPLING PRESS 74111 35MM SLIP COUPLING PRESS 74112 42MM SLIP COUPLING PRESS 74113 54MM SLIP COUPLING PRESS 74114 22X15MM REDUCED COUPLING PRESS 74115 28X15MM REDUCED COUPLING PRESS 74116 28X22MM REDUCED COUPLING PRESS 74117 35X15MM REDUCED COUPLING PRESS 74118 35X22MM REDUCED COUPLING PRESS 74119 35X28MM REDUCED COUPLING PRESS 74120 42X15MM REDUCED COUPLING PRESS 74121 42X22MM REDUCED COUPLING PRESS 74122 42X28MM REDUCED COUPLING PRESS 74123 42X35MM REDUCED COUPLING PRESS 74124 54X15MM REDUCED COUPLING PRESS 74125 54X22MM REDUCED COUPLING PRESS 74126 54X28MM REDUCED COUPLING PRESS 74127 54X35MM REDUCED COUPLING PRESS 74128 54X42MM REDUCED COUPLING PRESS 74129 22X15MM FITTNG REDUCER PRESS 74130 28X15MM FITTNG REDUCER PRESS 74131 28X22MM FITTNG REDUCER PRESS 74132 35X15MM FITTNG REDUCER PRESS 74133 35X22MM FITTNG REDUCER PRESS 74134 35X28MM FITTNG REDUCER PRESS 74135 42X15MM FITTNG REDUCER PRESS 74136 42X22MM FITTNG REDUCER PRESS 74137 42X28MM FITTNG REDUCER PRESS 74138 42X35MM FITTNG REDUCER PRESS 74139 54X15MM FITTNG REDUCER PRESS 74140 54X22MM FITTNG REDUCER PRESS 74141 54X28MM FITTNG REDUCER PRESS 74142 54X35MM FITTNG REDUCER PRESS 74143 54X42MM FITTNG REDUCER PRESS 74144 15MM 90D EQUAL ELBOW PRESS 74145 22MM 90D EQUAL ELBOW PRESS 74146 28MM 90D EQUAL ELBOW PRESS 74147 35MM 90D EQUAL ELBOW PRESS 74148 42MM 90D EQUAL ELBOW PRESS 74149 54MM 90D EQUAL ELBOW PRESS 74150 15MM 90D STREET ELBOW PRESS 74151 22MM 90D STREET ELBOW PRESS 74152 28MM 90D STREET ELBOW PRESS 74153 35MM 90D STREET ELBOW PRESS 74154 42MM 90D STREET ELBOW PRESS 74155 54MM 90D STREET ELBOW PRESS 74156 15MM 45D EQUAL ELBOW PRESS 74157 22MM 45D EQUAL ELBOW PRESS 74158 28MM 45D EQUAL ELBOW PRESS 74159 35MM 45D EQUAL ELBOW PRESS 74160 42MM 45D EQUAL ELBOW PRESS 74161 54MM 45D EQUAL ELBOW PRESS 74162 15MM 45D STREET ELBOW PRESS 74163 22MM 45D STREET ELBOW PRESS 74164 28MM 45D STREET ELBOW PRESS 74165 35MM 45D STREET ELBOW PRESS 74166 42MM 45D STREET ELBOW PRESS 74167 54MM 45D STREET ELBOW PRESS 74168 15MM STOP END PRESS 74169 22MM STOP END PRESS 74170 28MM STOP END PRESS 74171 35MM STOP END PRESS 74172 42MM STOP END PRESS 74173 54MM STOP END PRESS 74174 15MM EQUAL TEE PRESS 74175 22MM EQUAL TEE PRESS 74176 28MM EQUAL TEE PRESS 74177 35MM EQUAL TEE PRESS 74178 42MM EQUAL TEE PRESS 74179 54MM EQUAL TEE PRESS 74180 15MM PART CROSSOVER PRESS 74181 22MM PART CROSSOVER PRESS 74182 15MM FULL CROSSOVER PRESS 74183 22MM FULL CROSSOVER PRESS 74184 22X15MM REDUCED ELBOW PRESS 74185 22X15X15MM REDUCING TEE PRESS 74186 22X15X22MM REDUCING TEE PRESS 74187 28X22X22MM REDUCING TEE PRESS 74188 28X22X28MM REDUCING TEE PRESS 74189 22X22X15MM REDUCING TEE PRESS 74190 28X28X15MM REDUCING TEE PRESS 74191 28X28X22MM REDUCING TEE PRESS 74192 35X35X15MM REDUCING TEE PRESS 74193 35X35X22MM REDUCING TEE PRESS 74194 35X35X28MM REDUCING TEE PRESS 74195 42X42X15MM REDUCING TEE PRESS 74196 42X42X22MM REDUCING TEE PRESS 74197 42X42X28MM REDUCING TEE PRESS 74198 42X42X35MM REDUCING TEE PRESS 74199 54X54X15MM REDUCING TEE PRESS 74200 54X54X22MM REDUCING TEE PRESS 74201 54X54X28MM REDUCING TEE PRESS 74202 54X54X35MM REDUCING TEE PRESS 74203 54X54X42MM REDUCING TEE PRESS .
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company

Print This Approval


#2010001

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose, shower handset and metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2010001
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
Francis Pegler on operating member.
Installation Requirements:
R001 R006 R030
Model:
4K7005 - Waterfall H Pattern BSM
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company
Manufacturer:
STH Jiangmen
Company Name
STH Jiangmen

View All Listings by this Company

Print This Approval


#2010017

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate either a plastic flow straightener or aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010017
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
Marking:
COMAP on body.
Installation Requirements:
R001 R005 R010
Model:
922009 Andreu mono basin mixer tap 922010 Andreu mini mono basin mixer tap
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company
Manufacturer:
STH Jiangmen
Company Name
STH Jiangmen

View All Listings by this Company

Print This Approval


#2010019

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2010019
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
Francis Pegler on operating member.
Installation Requirements:
R001 R006 R030
Model:
4K9005 Lamina H Pattern bath filler & shower mixer.
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company
Manufacturer:
STH Jiangmen
Company Name
STH Jiangmen

View All Listings by this Company

Print This Approval


#2010028

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2010028
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
Comap on rear of body.
Installation Requirements:
R001 R006 R030
Model:
922013 Andreu Deck bath shower mixer.
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Phone
01942 265230

View All Listings by this Company
Manufacturer:
STH Jiangmen
Company Name
STH Jiangmen

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 6

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.