Zhejiang Qixi Sanitary Co., Ltd Approvals


#1906014

Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets), incorporating either a quarter turn or half turn ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906014
Expiry date:
30/06/2024
Size:
15mm compression
Marking:
WRAS and QIXI on body.
Installation Requirements:
R001 R010 R040
Model:
SH-T8573, SH-T8577, SH-T8578, SH-T8579, SH-T85710, SH-T85712, SH-T8571, SH-T8572, SH-T8574, SH-T8576, SH-T85713 & SH-T85714.
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#1906052

Range of wall mounted, concealed, thermostatic blending valves (brass body) incorporating a thermostatic cartridge controlling the temperature with a manual override button and dome, single lever, cubed or cross top operating members. Flow is controlled via a ceramic disc diverter which also diverts water to two different outlets. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906052
Expiry date:
30/06/2024
Marking:
QIXI & WRAS on faceplate.
Installation Requirements:
R001 R040 R010
Model:
SH-T85611, SH-T85611M, SH-T85612, SH-T85612M, SH-T85613, SH-T85613M, SH-T85614, SH-T85614M, SH-T85615, SH-T85615M, SH-T85617, SH-T85617M, SH-T85623, SH-T85623M, SH-T85620 & SH-T85620M
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#1906072

Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (SH-T8089 model), dome (SH-T80810 model) or cross top (SH-T80811 model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906072
Expiry date:
30/06/2024
Note:
This approval does not include a shower hose and handset, or an overhead shower outlet
Size:
¾” x ½” BSP (M) offset union
Marking:
QIXI and WRAS on body
Installation Requirements:
R001 R010 R040
Model:
SH-T8089, SH-T80810 & SH-T80811
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#1907020

Range of concealed wall mounted thermostatic shower valves with brass bodies incorporating quarter turn ceramic disc headwork and a two-way, half-turn ceramic disc manual diverter. Temperature is controlled independently via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets on the ½” models also incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907020
Expiry date:
31/07/2024
Note:
Not supplied with shower hose or handset
Size:
¾” BSP (M) (models ending in M), ½” BSP (F) (all other models)
Marking:
QIXI & WRAS on faceplate
Installation Requirements:
R001 R010 R040
Model:
SH-T8564, SH-T8564M, SH-T85610, SH-T85610M, SH-T8562, SH-T8562M, SH-T8566, SH-T8566M, SH-T8568, SH-T8568M, SH-T85621, SH-T85621M, SH-T85618, SH-T85618M, SH-T85624 & SH-T85624M
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#1906003

Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets) incorporating a quarter ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The SH-T8565, SH-T8569, SH-T8567, SH-T85619, SH-T8561, SH-T85616, SH-T85622 and SH-T8563 models also incorporate a stainless steel strainer on each inlet. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906003
Expiry date:
30/06/2024
Note:
This approval does not include a shower hose and handset.
Size:
½” BSP (F)
Marking:
WRAS and QIXI on faceplate
Installation Requirements:
R001 R010 R040
Model:
SH-T8561, SH-T8561M, SH-T8563, SH-T8563M, SH-T8565, SH-T8565M, SH-T8569, SH-T8569M, SH-T85616, SH-T85616M, SH-T85622, SH-T85622M, SH-T85619, SH-T85619M, SH-T8567 & SH-T8567M.
Factor:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval


#1911029

Range of wall mounted, bar type thermostatic shower mixing valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever, dome, cubed or cross top operating member (depending on model). The temperature is controlled independently via a thermostatic cartridge with a single lever, dome, cubed or cross top operating member (depending on model) and incorporates a manual override button. The product also incorporates an approved check valve cartridge located on the inlets of the valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products also incorporate a stainless-steel strainer located on the inlets of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1911029
Expiry date:
30/11/2024
Size:
¾” x ½” BSP (M) offset union
Marking:
QIXI and WRAS on body
Installation Requirements:
R001 R010 R040
Model:
SH-T8084. SH-T8087. SH-T8087M. SH-T8088. SH-T8088M. SH-T80812. SH-T80814. SH-T80814M. SH-T80815. SH-T80815M. SH-T80818. SH-T80820. SH-T80825. SH-T80823. SH-T80813. SH-T80826.
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#2010030

Range of quarter turn ceramic disc headworks incorporating brass bodies and EPDM ‘O’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
2010030
Expiry date:
31/10/2025
Size:
See model
Marking:
QIXI, SH and WRAS on body.
Installation Requirements:
R001
Model:
SH-QT8001B-02-C - ¾” BSP (M) SH-QT8001B-02-H - ¾” BSP (M) SH-QT8231-02-C - ¾” BSP (M) SH-QT8231-02-H - ¾” BSP (M) SH-T81022-04-C - ½” BSP (M) SH-T81022-04-H - ½” BSP (M) SH-T81071-02-C - ½” BSP (M) SH-T81071-02-H - ½” BSP (M)
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#2010049

Range of quarter turn ceramic disc headworks with brass bodies, EPDM rubber ‘O’-rings and silicone rubber washers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
2010049
Expiry date:
31/10/2025
Size:
See model
Marking:
QIXI, SH and WRAS on body.
Installation Requirements:
R001
Model:
1/2” BSP male: SH-T8015-06-H. SH-T8015-06-C. SH-T8108-14-H. SH-T8108-14-C. SH-T8037-05-H. SH-T8037-05-C. SH-T81011-02-H. SH-T81011-02-C. SH-T81073-02-H. SH-T81073-02-C. SH-T8001D-03-H. SH-T8001D-03-C. SH-T8037A-01-H. SH-T8037A-01-C. 3/4” BSP male: SH-T80501-05-H. SH-T80501-05-C. SH-T8231-02-H. SH-T8231-02-C. SH-T8001B-02-H. SH-T8001B-02-C.
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#2011029

Manual diverter headwork with a chromium plated brass body and NBR ‘O’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
0440 Headworks
WRAS Approval Number:
2011029
Expiry date:
30/11/2025
Size:
½” BSP (M)
Marking:
QIXI, SH, and WRAS on body.
Installation Requirements:
R001
Model:
SH-T8031-20
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#2101047

A range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating either ceramic cartridge or quarter turn ceramic disc headwork with a single lever, cross top or dome type operating member. The spout outlets incorporate either a plastic flow straightener or aerator. Model SH-T81072 is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101047
Expiry date:
31/01/2026
Note:
No inlet hoses included as part of this approval.
Size:
M10 or M12 (F)
Marking:
QIXI & WRAS on rear of body.
Installation Requirements:
R001 R006 R010
Model:
Ceramic cartridge headwork: SH-T8006 SH-T8026 SH-T81034 SH-T81037 SH-T81045 SH-T81063 SH-T81072 SH-T81084 Ceramic disc headwork: SH-T8106A SH-T8108 SH-T8162AW SH-T8162MW SH-T8162W SH-T8163A SH-T8163 SH-T80551L SH-T80551W SH-T80552L SH-T80691A SH-T80691L SH-T80691 SH-T81011 SH-T81023 SH-T81028A SH-T81028 SH-T81032A SH-T81032 SH-T81044 SH-T81069 SH-T81073 SH-T81077 SH-T81085
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Phone
189 685 872 326

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.