Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘Classic’ range of single hole, single outlet (fixed) electronically operated, tap assemblies (chromium plated DZR brass). Flow is controlled via solenoid valve, actuated by an infra-red sensor. The spout outlet incorporates a plastic aerator. AT05-001 & AT05-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT05-002 & AT05-012 models have a 10mm copper tail. AT05-003 & AT05-013 models have a 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The AT05-056, AT05-057 & AT05-058 spouts are intended to accommodate a filter on the outlet. No filter is supplied with the product and is not considered part of the approval. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection, 10mm copper tail or 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The AT02-004, AT02-014 & AT02-024 spouts are intended to accommodate a filter on the outlet. No filter is supplied with the product and is not considered part of the approval. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection, 10mm copper tail or 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
‘Classic’ range of single hole, single outlet (fixed) electronically operated, tap assemblies (chromium plated DZR brass). Flow is controlled via solenoid valve, actuated by an infra-red sensor. The spout outlet incorporates a plastic aerator. AT01-001 & AT01-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT01-002 & AT01-012 models have a 10mm copper tail. AT01-003 & AT01-013 models have a 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
‘Flushmatic’ range of urinal flushing mechanisms, consisting of a solenoid valve controlling the flow which is actuated via an infra-red sensor. Models are either mains or battery operated and are available in a variety of enclosure options. Maximum working pressure 8.0 bar. Cold water use only.
Range of wall mounted, electronically controlled spout outlets with stainless steel bodies. Flow is controlled via a solenoid valve activated via an infra-red sensor. Models AT07-102 and AT07-103 are supplied with a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, single hole, single outlet (fixed) combination tap assemblies with chromium plated, DZR brass bodies. The products incorporate a single sequential headwork with a single lever operating member or a push button. The spout outlets incorporate a plastic flow straightener. The inlets incorporate an approved check valve cartridge however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with metal back nuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Page 1 of 2
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
