Plumbing and Heating Ltd Approvals


#1905902

Exposed thermostatic shower blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a single lever operating memerb. Temperature is controlled independeanlty via a thermostatic cartridge, also using a single lever operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1905902
Expiry date:
31/05/2024
Marking:
Esteem on operating member MT1200-2 0318 (MM/YY) on valve body
Installation Requirements:
R001 R010 R040
Model:
E80019
Factor:
Plumbing and Heating Ltd
Company Name
Plumbing and Heating Ltd
Address
The Whitehouse Wilderspool Park Greenalls Avenue
Postcode
WA4 6HL

View All Listings by this Company

Print This Approval


#2001116

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses. These products are also supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001116
Expiry date:
31/01/2025
Size:
Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
esteem (Trademark of PHI) on operating member
Installation Requirements:
R001 R006 R010
Model:
E60066 VETTIS MONO BASIN MIXER WITH CLICK WASTE & E60067 VETTIS MINI MONO BASIN MIXER WITH CLICK WASTE
Factor:
Plumbing and Heating Ltd
Company Name
Plumbing and Heating Ltd
Address
The Whitehouse Wilderspool Park Greenalls Avenue
Postcode
WA4 6HL

View All Listings by this Company

Print This Approval


#2001118

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Both models are supplied with a click type pop-up waste, plastic flow regulators on each inlet and an alternative (loose) flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001118
Expiry date:
31/01/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
esteem (Trademark of PHI) on operating member
Installation Requirements:
R001 R006 R010
Model:
E60071 KISDON MONO BASIN MIXER WITH CLICK WASTE & E60072 KISDON MINI MONO BASIN WITH CLICK WASTE
Factor:
Plumbing and Heating Ltd
Company Name
Plumbing and Heating Ltd
Address
The Whitehouse Wilderspool Park Greenalls Avenue
Postcode
WA4 6HL

View All Listings by this Company

Print This Approval


#2010089

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2010089
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
Esteem on operating member.
Installation Requirements:
R001 R006 R030
Model:
E60075 KISDON H PATTERN BATH FILLER & SHOWER MIXER COMBINATION TAP ASSEMBLIES
Factor:
Plumbing and Heating Ltd
Company Name
Plumbing and Heating Ltd
Address
The Whitehouse Wilderspool Park Greenalls Avenue
Postcode
WA4 6HL

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.