DAVROC LIMITED Approvals


WRAS Approval Number: 2006004

Range of floor mounted, single outlet, combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and self-cancelling diverter to shower outlet. The spout outlets incorporate plastic aerators. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 2006004
  • Expiry date: 30/06/2025
  • Size: ½” BSP (M)
  • Marking: “Coalbrook” logo on base of spout
  • Installation Requirements R001 R030
  • Model
    XX1004YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006022

Wall mounted shower kit incorporating a plastic shower handset (various finishes), shower hose and riser rail. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2006022
  • Expiry date: 30/06/2025
  • Note: Open outlet use only
  • Size: ½” BSP (F) captive nut end connection.
  • Marking: Coalbrook logo (a brand of Davroc) on shower handset.
  • Installation Requirements R001 R040
  • Model
    XX4002YY XX denotes the trim and can be replaced with: CO – Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006030

Wall mounted, concealed, thermostatic mixing valves with brass bodies (various finishes). The flow is controlled independently via a quarter turn ceramic disc headwork with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating member which incorporates a manual override button Both inlets incorporate approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2006030
  • Expiry date: 30/06/2025
  • Marking: Coalbrook logo on trim set.
  • Installation Requirements R001 R010 R040
  • Model
    XX3002YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006031

Two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2006031
  • Expiry date: 30/06/2025
  • Size: PET braided TpSiv lined flexible hose assemblies with a ½” BSP (F) Captive Nut.
  • Marking: Coalbrook logo on back base of spout
  • Installation Requirements R001 R006 R009 R010
  • Model
    XX1003YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006032

Deck mounted, pull-out shower hose and handset. The inlet of the shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2006032
  • Expiry date: 30/06/2025
  • Note: Open outlet use only
  • Size: Stainless steel sheathed, EPDM lined flexible shower hose with a ½” BSP (F) captive nut
  • Marking: "Coalbrook” logo on rear of handset
  • Installation Requirements R001 R040
  • Model
    XX5003YY XX denotes the trim and can be replaced with: CO - Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006033

Wall mounted, thermostatic mixing valve (various finishes), incorporating a ceramic cartridge diverter controlling the flow between the 3 outlets and the off position. The temperature is controlled independently via a thermostatic cartridge with single lever operating members which incorporate a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum working temperature 85°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2006033
  • Expiry date: 30/06/2025
  • Size: ¾” BSP (F)
  • Marking: Coalbrook logo on trim set
  • Installation Requirements R001 R010 R040
  • Model
    XX3003YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006034

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headworks with dome type or single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2006034
  • Expiry date: 30/06/2025
  • Size: ½” BSP (F)
  • Marking: Coalbrook logo on underside of spout.
  • Installation Requirements R001 R009 R010 R040
  • Model
    XX1008YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006036

Wall mounted shower set comprising of an inlet connection, shower handset, shower holder and EPDM lined shower hose. Maximum working pressure 5.0 bar. Maximum operating temperature 70⁰C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2006036
  • Expiry date: 30/06/2025
  • Size: ½” BSP (M)
  • Marking: Coalbrook logo on hand set and hand set holder.
  • Installation Requirements R001 R040
  • Model
    XX4001YY XX denotes the trim and can be replaced with: CO – Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006038

Wall mounted two-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes) and ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2006038
  • Expiry date: 30/06/2025
  • Size: ½” BSP (M)
  • Marking: Coalbrook logo on spout.
  • Installation Requirements R001 R010 R040
  • Model
    XX1007YY From February 2021 new model added: XX1009YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006039

Range of single hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2006039
  • Expiry date: 30/06/2025
  • Size: PET braided, TpSiv lined flexible hose assembly with a ½” BSP (F) captive nut.
  • Marking: Coalbrook on back of spout.
  • Installation Requirements R011 R006 R010
  • Model
    XX1001YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
  • Factor: DAVROC LIMITED
    Company Name
    DAVROC LIMITED
    Postcode
    EN11 0QS
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3