Xiamen Solex High-tech Industries Co,. Ltd Approvals


#1909045

Wall mounted, thermostatic shower valve (chromium plated brass) incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge also using a dome type operating member that incorporates a manual override button. The shower riser incorporates a manual diverter which diverts between the overhead shower and the shower hose and handset. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower rose, shower hose and handset. Maximum working pressure 6.0 Bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1909045
Expiry date:
30/09/2024
Size:
½” BSP (M) x ¾” BSP (M) offset unions.
Marking:
WRAS and SOLEX on body
Installation Requirements:
R001 R010 R040
Model:
B36210-2
Manufacturer:
Xiamen Solex High-tech Industries Co,. Ltd
Company Name
Xiamen Solex High-tech Industries Co,. Ltd
Address
NO.298 sunshine western road, Haicang District, Xiamen city

View All Listings by this Company

Print This Approval


#1909047

Range of stainless steel interlock PVD coated, PVC lined flexible hoses with various end connections. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
1909047
Expiry date:
30/09/2024
Note:
Open outlet use only
Size:
½” BSP (F) captive nut
Marking:
SOLEX, WRAS and year of manufacture (MM/YY) on ferrule
Installation Requirements:
R001
Model:
H23X0001S – DN10, DN11 bore. H23X0001S – DN8.5 bore. H23X0001S – DN8.5 bore (Anti-winding).
Manufacturer:
Xiamen Solex High-tech Industries Co,. Ltd
Company Name
Xiamen Solex High-tech Industries Co,. Ltd
Address
NO.298 sunshine western road, Haicang District, Xiamen city

View All Listings by this Company

Print This Approval


#2012012

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2012012
Expiry date:
31/12/2025
Note:
Open outlet use only.
Marking:
Solex, WRAS and date of manufacture (MM/YY) on captive nut.
Installation Requirements:
R001
Model:
H21X0008S-01 - ½” BSP (F) conical or captive nut. H21X0008S-02 - ½” BSP (F) conical or captive nut. Models added November 2021: H21X0007S-01 - ½” BSP (F) conical or captive nut. H21X0007S-02 - ½” BSP (F) conical or captive nut. H21X0007S-03 - ½” BSP (F) conical or captive nut. H21X0007S-04 - ½” BSP (F) conical or captive nut. H21X0007S-05 - ½” BSP (F) conical or captive nut.
Manufacturer:
Xiamen Solex High-tech Industries Co,. Ltd
Company Name
Xiamen Solex High-tech Industries Co,. Ltd
Address
NO.298 sunshine western road, Haicang District, Xiamen city

View All Listings by this Company

Print This Approval


#2312367

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a nylon braided flexible hose incorporating a dual layer inner hose consisting of PEX inner layer and HDPE outer layer, and a manually operated button to divert between a plastic aerator and the spray function. The spray handset incorporates an approved check valve cartridge with an integral plastic flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2312367
Expiry date:
31/12/2028
Note:
R007 applies only to the hose assembly for use between the tap body and the quick-connect fitting.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Franke on operating member.
Installation Requirements:
R001 R007 R009 R090
Model:
Pescara: 115.0523.290 (Chrome), 115.0523.302 (Stainless-steel), 115.0538.940 (Chrome), 115.0539.021 (Stainless-steel), 115.0575.968 (Matte black).
Factor:
Franke Kitchen System Ltd
Company Name
Franke Kitchen System Ltd
Address
Franke Strasse 2 CH-4663 Aarburg

View All Listings by this Company
Manufacturer:
Xiamen Solex High-tech Industries Co,. Ltd
Company Name
Xiamen Solex High-tech Industries Co,. Ltd
Address
NO.298 sunshine western road, Haicang District, Xiamen city

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.