IDC FLUID CONTROL CO., LTD Approvals


#1904070

Range of brass push-fit fittings incorporating EDPM O-rings. For use with Irish copper pipe Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904070
Expiry date:
30/04/2024
Marking:
IDC logo: E mark (~E~ within circle) & size on body
Installation Requirements:
R001
Model:
Elbow fitting: 2PAB014, 2PAB021. Pushfit fiting End: 2PAD014, 2PAD021. Pushfit straight fitting: 2PAA014, 2PAA021. Pushfit Straight Pushfit x Pipe: 2PPA142. Pushfit straight reduced Fitting: 2PAA121. Pushfit Tee Fitting: 2PAC014, 2PAC021. Pushfit Tee reduced: 2PAC221, 2PAC212, 2PAC211 Max.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1906040

Range of spherical valves with nickel plated brass bodies, DZR Brass bodies & brass balls, PTFE seats and lever or butterfly operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100˚C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1906040
Expiry date:
30/06/2024
Size:
¼” - 2” M or F BSP.
Marking:
E logo on body.
Installation Requirements:
R001
Model:
1BVD102, 1BVD103, 1BVD104, 1BVD106, 1BVD108, 1BVD110, 1BVD112, 1BVD114. 1BVC102, 1BVC103, 1BVC104, 1BVC106, 1BVC108, 1BVC110, 1BVC112, 1BVC114. 1BVD202, 1BVD203, 1BVD204, 1BVD206, 1BVD208, 1BVD220, 1BVD222, 1BVD224. 1BVC202, 1BVC203, 1BVC204, 1BVC206, 1BVC208, 1BVC220,1BVC222, 1BVC224.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1909078

Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass, brass or DZR brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures: M30220000P model: 40.0 bar. M30150000DZRP, M30220000DZRP, M30150000LVP, M30150000, M30150000P, & M30220000 models: 25.0 bar. All other models are 10.0 bar. Maximum working temperature 99°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1909078
Expiry date:
30/09/2024
Size:
see model
Marking:
IDC logo: E mark (~E~ within a circle) and size on valve body. Size on compression nut. The DZR models are marked 'CR'. All valve bodies have flow arrows except models: M28150300AP, M28150400AP, M28150000A, M28150000AP, M30150000DZRP, M30220000DZRP, M30150000LVP, M30150000, M30150000P, M30220000 & M30220000P.
Installation Requirements:
R001
Model:
Maximum working pressure 10.0 bar: ISO050 Straight isolation valve 14.7mm compression. ISO050P Straight isolation valve 14.7mm compression CP. M28150000 Straight isolation valve 15mm compression. M28150000P Straight isolation valve 15mm compression CP. M28220000 Straight isolation valve 22mm compression. M28220000P Straight isolation valve 22mm compression CP. M28150000DZRP Straight isolation valve 15mm compression DZR. M28220000DZRP Straight isolation valve 22mm compression DZR CP. ISO050LV Straight isolation valve 14.7mm compression with level handle. ISO050LVP Straight isolation valve 14.7mm compression with level handle CP. M28150000LV Straight isolation valve 15mm compression with level handle. M28150000LVP Straight isolation valve 15mm compression with level handle CP. M28220000LV Straight isolation valve 22mm compression with level handle. M28220000LVP Straight isolation valve 22mm compression with level handle CP. M28150000LVDZRP Straight isolation valve 15mm compression DZR with level handle CP. M28220000LVDZRP Straight isolation valve 22mm compression DZR with level handle CP. M32150300P Straight isolation valve 15mm compression x 3/8”M CP. M32150000 Straight Isolation valve 15mm compression heavy pattern. M32150000P Straight Isolation valve 15mm compression heavy pattern CP. M28150300AP Angle isolation valve 15mm compression x 3/8”M CP. M28150400AP Angle isolation valve 15mm compression x 1/2”M CP. M28150000A Angle isolation valve 15mm compression. M28150000AP Angle isolation valve 15mm compression CP. SM722050 Straight service valve 14.7mm compression x swivel 1/2”F CP. M40150400P Straight service valve 15mm compression x swivel 1/2”F CP. M40220600P Straight service valve 22mm compression x swivel 3/4”F CP. SM721050 Angle service valve 14.7mm compression x swivel 1/2”F CP. M41150400P Angle service valve 15mm compression x swivel 1/2”F CP. M32150400P Straight service valve 15mm compression x 1/2”M CP. M32220600P Straight service valve 22mm compression x 3/4”M CP WMV050S Straight washing machine valve 14.7mm compression x 3/4”M CP. MWM1506 Straight washing machine valve 15mm compression x 3/4”M CP. MWMA1506 Angle washing machine valve 15mm compression x 3/4”M CP. MWMT1506 Tee washing machine valve 15mm compression x 3/4”M CP. 1BVA3 15mm compression tee washing machine valve CP. Maximum working pressure 25.0 bar: M30150000DZRP Straight isolation valve full bore 15mm compression DZR CP. M30220000DZRP Straight isolation valve full bore 22mm compression DZR CP. M30150000LVP Straight isolation valve full bore 15mm compression with level handle CP. M30150000 Straight isolation valve full bore 15mm compression. M30150000P Straight isolation valve full bore 15mm compression CP. M30220000 Straight isolation valve full bore 22mm compression. Maximum working pressure 40.0 bar: M30220000P Straight isolation valve full bore 22mm compression CP.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1907022

Range of T-type thermostatic mixing valves (brass bodies). All models incorporate a stainless-steel strainer a single check valve in both the inlet connections (suitable for backflow protection up to fluid category 2). Models 1TMC201 and 1TMC202 incorporate isolation valves in the inlet connections. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907022
Expiry date:
31/07/2024
Size:
15mm, 21mm, 22mm & ½” compression.
Marking:
‘E’ logo on body.
Installation Requirements:
R001 R010 R040 R120
Model:
TITAN3075 TMV3, TITAN3050 TMV3, 1TMC101 TMV3, 1TMC201 TMV3, 1TMC102 TMV3 & 1TMC202 TMV3.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1912015

Double check valve assembly with DZR brass body consisting of two spring loaded, resilient trim in-line check valve cartridges, incorporating a lever operated spherical valve. Maximum working pressure 10.0 bar. Cold water use only

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
1912015
Expiry date:
31/12/2024
Note:
Not for use with water injected with CO2 gas
Size:
¾” BSP (F) inlet/outlet
Marking:
Edwards Standpipes, size, CR and flow arrow on body
Installation Requirements:
R001
Model:
ITEMA50568
Factor:
Edwards Engineering Ltd
Company Name
Edwards Engineering Ltd
Address
Medley Park Craven Arms Shropshire
Postcode
SY7 9LL

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2001045

Range of lever operated spherical valves with a brass body and ball, and PTFE seats. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2001045
Expiry date:
31/01/2025
Size:
See model
Marking:
IDC Plumbing & Heating Technology (Beijing) Ltd. logo (~E~ within a circle), PN and size on body.
Installation Requirements:
R001
Model:
TBV125CC: 34mm compression, TBV150CC: 40.5mm compression, TBV200CC: 53.6mm compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2001100

Range of non-verifiable double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. The products incorporate a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2001100
Expiry date:
31/01/2025
Note:
Not for use with water injected with CO2 gas.
Size:
see model
Marking:
IDC logo: E mark (~E~ within circle), size, flow arrow and CR marking on body. EN1245-2 on compression nuts.
Installation Requirements:
R001
Model:
M37150000 - 15mm compression. M37150000P (Nickel plated) - 15mm compression. M37220000 - 22mm compression. M37280000 - 28mm compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2003348

Range of gate valves having brass bodies and a PTFE gasket. The valves either have a handwheel or lockshield operating mechanism. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2003348
Expiry date:
31/03/2025
Size:
2 ½” BSP (F)
Marking:
Conex, size and pressure on body.
Installation Requirements:
R001
Model:
112210FFW202020 handwheel option 112210FFK202020 lockshield options
Factor:
Conex Universal Ltd
Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou
General Email

View All Listings by this Company

Print This Approval


#2003046

Range of drain off taps with brass bodies, incorporating a non-rising spindle operating mechanism and NBR ‘O’-rings and EPDM seat washer. Maximum working pressure 10.0 Bar. Maximum operating temperature 99°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2003046
Expiry date:
31/03/2025
Size:
See model
Marking:
IDC logo: E mark (~E~ within a circle) on valve body. Size on compression nut.
Installation Requirements:
R001
Model:
Straight Drain off compression: BF1711: ½” compression x ½” compression. BF1712: ¾” compression x ¾” compression. BF1713: 1” compression x 1” compression. Elbow Drain off compression: BF4712: ¾” compression x ¾” compression. BF4713: ¾” compression x ¾” compression. Elbow Drain off Male x compression: BF8712: ¾” BSP (M) x ¾” compression. BF8713: 1” BSP (M) x ¾” compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2007329

Range of spring loaded, resilient trim, non-return valves with brass bodies. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
WRAS Approval Number:
2007329
Expiry date:
31/07/2025
Size:
See model.
Marking:
IDC logo (E), size, flow arrow and PN on Body
Installation Requirements:
R001
Model:
1CVC004N – ½” BSP (F) 1CVC006N – ¾” BSP (F) 1CVC008N – 1” BSP (F)
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.