‘Flowflex,’ ‘Lamontite’ and ‘Opal’ ranges of brass, DZR brass, chromium plated brass, nickel plated brass and DZR brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211336

Size:

See models.

Marking:

FLOWFLEX, Size, EN1542-2, UK or UK Made OPAL, Size, EN1254-2 LAMONTITE, Size, EN1254-2 and UK on compression nut. CR on DZR models.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

P901.02 Flowflex Brass Compression Straight Coupling 8mm, P901.03 Flowflex Brass Compression Straight Coupling 10mm, P901.04 Flowflex Brass Compression Straight Coupling 12mm, P901.05 Flowflex Brass Compression Straight Coupling 15mm, P901.08 Flowflex Brass Compression Straight Coupling 22mm, P901.09 Flowflex Brass Compression Straight Coupling 28mm, OP901.05 Opal Brass Compression Straight Coupling 15mm, OP901.08 Opal Brass Compression Straight Coupling 22mm, OP901.09 Opal Brass Compression Straight Coupling 28mm, L901.02 Lamontite Brass Compression Straight Coupling 8mm, L901.03 Lamontite Brass Compression Straight Coupling 10mm, L901.04 Lamontite Brass Compression Straight Coupling 12mm, L901.05 Lamontite Brass Compression Straight Coupling 15mm, L901.08 Lamontite Brass Compression Straight Coupling 22mm, L901.09 Lamontite Brass Compression Straight Coupling 28mm, P901DR.02 Flowflex DZR Brass Compression Straight Coupling 8mm, P901DR.03 Flowflex DZR Brass Compression Straight Coupling 10mm, P901DR.04 Flowflex DZR Brass Compression Straight Coupling 12mm, P901DR.05 Flowflex DZR Brass Compression Straight Coupling 15mm, P901DR.08 Flowflex DZR Brass Compression Straight Coupling 22mm, P901DR.09 Flowflex DZR Brass Compression Straight Coupling 28mm, L901DR.02 Lamontite DZR Brass Compression Straight Coupling 8mm, L901DR.03 Lamontite DZR Brass Compression Straight Coupling 10mm, L901DR.04 Lamontite DZR Brass Compression Straight Coupling 12mm, L901DR.05 Lamontite DZR Brass Compression Straight Coupling 15mm, L901DR.08 Lamontite DZR Brass Compression Straight Coupling 22mm, L901DR.09 Lamontite DZR Brass Compression Straight Coupling 28mm, P901.14 Flowflex Brass Compression Reducing Coupling 10 x 8mm, P901.15 Flowflex Brass Compression Reducing Coupling 12 x 8mm, P901.16 Flowflex Brass Compression Reducing Coupling 12 x 10mm, P901.17 Flowflex Brass Compression Reducing Coupling 15 x 8mm, P901.18 Flowflex Brass Compression Reducing Coupling 15 x 10mm, P901.19 Flowflex Brass Compression Reducing Coupling 15 x 12mm, P901.20 Flowflex Brass Compression Reducing Coupling 22 x 15mm, P901.21 Flowflex Brass Compression Reducing Coupling 28 x 15mm, P901.22 Flowflex Brass Compression Reducing Coupling 28 x 22mm, OP901.20 Opal Brass Compression Reducing Coupling 22 x 15mm, OP901.22 Opal Brass Compression Reducing Coupling 28 x 22mm, L901.16 Lamontite Brass Compression Reducing Coupling 12 x 10mm, L901.17 Lamontite Brass Compression Reducing Coupling 15 x 8mm, L901.18 Lamontite Brass Compression Reducing Coupling 15 x 10mm, L901.19 Lamontite Brass Compression Reducing Coupling 15 x 12mm, L901.20 Lamontite Brass Compression Reducing Coupling 22 x 15mm, L901.21 Lamontite Brass Compression Reducing Coupling 28 x 15mm, L901.22 Lamontite Brass Compression Reducing Coupling 28 x 22mm, P901DR.14 Flowflex DZR Brass Compression Reducing Coupling 10 x 8mm, P901DR.15 Flowflex DZR Brass Compression Reducing Coupling 12 x 8mm, P901DR.16 Flowflex DZR Brass Compression Reducing Coupling 12 x 10mm, P901DR.17 Flowflex DZR Brass Compression Reducing Coupling 15 x 8mm, P901DR.18 Flowflex DZR Brass Compression Reducing Coupling 15 x 10mm, P901DR.19 Flowflex DZR Brass Compression Reducing Coupling 15 x 12mm, P901DR.20 Flowflex DZR Brass Compression Reducing Coupling 22 x 15mm, P901DR.22 Flowflex DZR Brass Compression Reducing Coupling 28 x 22mm, L901DR.16 Lamontite DZR Brass Compression Reducing Coupling 12 x 10mm, L901DR.17 Lamontite DZR Brass Compression Reducing Coupling 15 x 8mm, L901DR.18 Lamontite DZR Brass Compression Reducing Coupling 15 x 10mm, L901DR.19 Lamontite DZR Brass Compression Reducing Coupling 15 x 12mm, L901DR.20 Lamontite DZR Brass Compression Reducing Coupling 22 x 15mm, L901DR.22 Lamontite DZR Brass Compression Reducing Coupling 28 x 22mm, P901RP.1 Flowflex Brass Compression Repair Coupling 15 x 75mm, P901RP.2 Flowflex Brass Compression Repair Coupling 15 x 100mm, P901RP.3 Flowflex Brass Compression Repair Coupling 15 x 125mm, P901RP.5 Flowflex Brass Compression Repair Coupling 22 x 100mm, OP901RP.2 Opal Brass Compression Repair Coupling 15 x 100mm, L901RP.2 Lamontite Brass Compression Repair Coupling 15 x 100mm, L901RP.5 Lamontite Brass Compression Repair Coupling 22 x 100mm, P906.05 Flowflex Brass Compression Slip Coupling 15mm, P906.08 Flowflex Brass Compression Slip Coupling 22mm, P902.03 Flowflex Brass Compression Male Adaptor 8mm x 1/8”, P902.04 Flowflex Brass Compression Male Adaptor 8mm x ¼”, P902.05 Flowflex Brass Compression Male Adaptor 8mm x 3/8”, P902.06 Flowflex Brass Compression Male Adaptor 8mm x ½”, P902.07 Flowflex Brass Compression Male Adaptor 10mm x ¼”, P902.08 Flowflex Brass Compression Male Adaptor 10mm x 3/8”, P902.09 Flowflex Brass Compression Male Adaptor 10mm x ½”, P902.10 Flowflex Brass Compression Male Adaptor 12mm x ¼”, P902.11 Flowflex Brass Compression Male Adaptor 12mm x 3/8”, P902.12 Flowflex Brass Compression Male Adaptor 12mm x ½”, P902.13 Flowflex Brass Compression Male Adaptor 15mm x ¼”, P902.14 Flowflex Brass Compression Male Adaptor 15mm x 3/8”, P902.15 Flowflex Brass Compression Male Adaptor 15mm x ½”, P902.17 Flowflex Brass Compression Male Adaptor 15mm x ¾”, P902.173 Flowflex Brass Compression Male Adaptor 15mm x 1”, P902.20 Flowflex Brass Compression Male Adaptor 22mm x ½”, P902.21 Flowflex Brass Compression Male Adaptor 22mm x ¾”, P902.22 Flowflex Brass Compression Male Adaptor 22mm x 1”, P902.224 Flowflex Brass Compression Male Adaptor 28mm x ½”, P902.221 Flowflex Brass Compression Male Adaptor 28mm x ¾”, P902.23 Flowflex Brass Compression Male Adaptor 28mm x 1”, P902.234 Flowflex Brass Compression Male Adaptor 28mm x 1 ¼”, OP902.15 Opal Brass Compression Male Adaptor 15mm x ½”, OP902.17 Opal Brass Compression Male Adaptor 15mm x ¾”, OP902.21 Opal Brass Compression Male Adaptor 22mm x ¾”, OP902.22 Opal Brass Compression Male Adaptor 22mm x 1”, OP902.23 Opal Brass Compression Male Adaptor 28mm x 1”, L902.05 Lamontite Brass Compression Male Adaptor 8mm x 3/8”, L902.06 Lamontite Brass Compression Male Adaptor 8mm x ½”, L902.08 Lamontite Brass Compression Male Adaptor 10mm x 3/8”, L902.09 Lamontite Brass Compression Male Adaptor 10mm x ½”, L902.12 Lamontite Brass Compression Male Adaptor 12mm x ½”, L902.13 Lamontite Brass Compression Male Adaptor 15mm x ¼”, L902.15 Lamontite Brass Compression Male Adaptor 15mm x ½”, L902.17 Lamontite Brass Compression Male Adaptor 15mm x ¾”, L902.20 Lamontite Brass Compression Male Adaptor 22mm x ½”, L902.21 Lamontite Brass Compression Male Adaptor 22mm x ¾”, L902.22 Lamontite Brass Compression Male Adaptor 22mm x 1”, L902.224 Lamontite Brass Compression Male Adaptor 28mm x ½”, L902.221 Lamontite Brass Compression Male Adaptor 28mm x ¾”, L902.23 Lamontite Brass Compression Male Adaptor 28mm x 1”, P902DR.08 Flowflex DZR Brass Compression Male Adaptor 10mm x 3/8”, P902DR.09 Flowflex DZR Brass Compression Male Adaptor 10mm x ½”, P902DR.11 Flowflex DZR Brass Compression Male Adaptor 12mm x 3/8”, P902DR.12 Flowflex DZR Brass Compression Male Adaptor 12mm x ½”, P902DR.14 Flowflex DZR Brass Compression Male Adaptor 15mm x 3/8”, P902DR.15 Flowflex DZR Brass Compression Male Adaptor 15mm x ½”, P902DR.17 Flowflex DZR Brass Compression Male Adaptor 15mm x ¾”, P902DR.20 Flowflex DZR Brass Compression Male Adaptor 22mm x ½”, P902DR.21 Flowflex DZR Brass Compression Male Adaptor 22mm x ¾”, P902DR.22 Flowflex DZR Brass Compression Male Adaptor 22mm x 1”, P902DR.220 Flowflex DZR Brass Compression Male Adaptor 28mm x ½”, P902DR.221 Flowflex DZR Brass Compression Male Adaptor 28mm x ¾”, P902DR.23 Flowflex DZR Brass Compression Male Adaptor 28mm x 1”, L902DR.07 Lamontite DZR Brass Compression Male Adaptor 10mm x ¼”, L902DR.08 Lamontite DZR Brass Compression Male Adaptor 10mm x 3/8”, L902DR.09 Lamontite DZR Brass Compression Male Adaptor 10mm x ½”, L902DR.11 Lamontite DZR Brass Compression Male Adaptor 12mm x 3/8”, L902DR.12 Lamontite DZR Brass Compression Male Adaptor 12mm x ½”, L902DR.13 Lamontite DZR Brass Compression Male Adaptor 15mm x ¼”, L902DR.14 Lamontite DZR Brass Compression Male Adaptor 15mm x 3/8”, L902DR.15 Lamontite DZR Brass Compression Male Adaptor 15mm x ½”, L902DR.17 Lamontite DZR Brass Compression Male Adaptor 15mm x ¾”, L902DR.20 Lamontite DZR Brass Compression Male Adaptor 22mm x ½”, L902DR.21 Lamontite DZR Brass Compression Male Adaptor 22mm x ¾”, L902DR.22 Lamontite DZR Brass Compression Male Adaptor 22mm x 1”, L902DR.221 Lamontite DZR Brass Compression Male Adaptor 28mm x ¾”, L902DR.23 Lamontite DZR Brass Compression Male Adaptor 28mm x 1”, P902T.03 Flowflex Brass Compression Male Taper Adaptor 8mm x 1/8”, P902T.04 Flowflex Brass Compression Male Taper Adaptor 8mm x ¼”, P902T.05 Flowflex Brass Compression Male Taper Adaptor 8mm x 3/8”, P902T.06 Flowflex Brass Compression Male Taper Adaptor 10mm x ¼”, P902T.07 Flowflex Brass Compression Male Taper Adaptor 10mm x 3/8”, P902T.08 Flowflex Brass Compression Male Taper Adaptor 10mm x ½”, P902T.09 Flowflex Brass Compression Male Taper Adaptor 12mm x ¼”, P902T.10 Flowflex Brass Compression Male Taper Adaptor 12mm x 3/8”, P902T.11 Flowflex Brass Compression Male Taper Adaptor 12mm x ½”, P902T.113 Flowflex Brass Compression Male Taper Adaptor 12mm x ¾”, P902T.12 Flowflex Brass Compression Male Taper Adaptor 15mm x ¼”, P902T.13 Flowflex Brass Compression Male Taper Adaptor 15mm x 3/8”, P902T.14 Flowflex Brass Compression Male Taper Adaptor 15mm x ½”, P902T.155 Flowflex Brass Compression Male Taper Adaptor 15mm x ¾”, P902T.178 Flowflex Brass Compression Male Taper Adaptor 22mm x ½”, P902T.18 Flowflex Brass Compression Male Taper Adaptor 22mm x ¾”, P902T.182 Flowflex Brass Compression Male Taper Adaptor 22mm x 1”, P902T.185 Flowflex Brass Compression Male Taper Adaptor 28mm x ¾”, P902T.19 Flowflex Brass Compression Male Taper Adaptor 28mm x 1”, OP902T.14 Opal Brass Compression Male Taper Adaptor 15mm x ½”, OP902T.18 Opal Brass Compression Male Taper Adaptor 22mm x ¾”, OP902T.19 Opal Brass Compression Male Taper Adaptor 28mm x 1”, L902T.07 Lamontite Brass Compression Male Taper Adaptor 10mm x 3/8”, L902T.10 Lamontite Brass Compression Male Taper Adaptor 12mm x 3/8”, L902T.11 Lamontite Brass Compression Male Taper Adaptor 12mm x ½”, L902T.13 Lamontite Brass Compression Male Taper Adaptor 15mm x 3/8”, L902T.14 Lamontite Brass Compression Male Taper Adaptor 15mm x ½”, L902T.178 Lamontite Brass Compression Male Taper Adaptor 22mm x ½”, L902T.18 Lamontite Brass Compression Male Taper Adaptor 22mm x ¾”, P902TDR.14 Flowflex DZR Brass Compression Male Taper Adaptor 15mm x ½”, P902TDR.155 Flowflex DZR Brass Compression Male Taper Adaptor 15mm x ¾”, P902TDR.18 Flowflex DZR Brass Compression Male Taper Adaptor 22mm x ¾”, P902TDR.182 Flowflex DZR Brass Compression Male Taper Adaptor 22mm x 1”, P902TDR.19 Flowflex DZR Brass Compression Male Taper Adaptor 28mm x 1”, L902TDR.14 Lamontite DZR Brass Compression Male Taper Adaptor 15mm x ½”, L902TDR.18 Lamontite DZR Brass Compression Male Taper Adaptor 22mm x ¾”, L902TDR.182 Lamontite DZR Brass Compression Male Taper Adaptor 22mm x 1”, P902B.1 Flowflex Brass Compression Male Adaptor Extended Thread 15mm x ½”, P902B.17 Flowflex Brass Compression Male Adaptor Extended Thread 15mm x ¾”, P902B.20 Flowflex Brass Compression Male Adaptor Extended Thread 22mm x ½”, P902B.2 Flowflex Brass Compression Male Adaptor Extended Thread 22mm x ¾”, P902B.22 Flowflex Brass Compression Male Adaptor Extended Thread 22mm x 1”, P902B.221 Flowflex Brass Compression Male Adaptor Extended Thread 28mm x ¾”, P902B.3 Flowflex Brass Compression Male Adaptor Extended Thread 28mm x 1”, OP902B.2 Opal Brass Compression Male Adaptor Extended Thread 22mm x ¾”, P902BDR.1 Flowflex DZR Brass Compression Male Adaptor Extended Thread 15mm x ½”, P902BDR.2 Flowflex DZR Brass Compression Male Adaptor Extended Thread 22mm x ¾”, P902BDR.3 Flowflex DZR Brass Compression Male Adaptor Extended Thread 28mm x 1”, P903.003 Flowflex Brass Compression Female Adaptor 8mm x 1/8”, P903.01 Flowflex Brass Compression Female Adaptor 8mm x ¼”, P903.02 Flowflex Brass Compression Female Adaptor 8mm x 3/8”, P903.03 Flowflex Brass Compression Female Adaptor 8mm x ½”, P903.04 Flowflex Brass Compression Female Adaptor 10mm x ¼”, P903.05 Flowflex Brass Compression Female Adaptor 10mm x 3/8”, P903.06 Flowflex Brass Compression Female Adaptor 10mm x ½”, P903.07 Flowflex Brass Compression Female Adaptor 12mm x ¼”, P903.08 Flowflex Brass Compression Female Adaptor 12mm x 3/8”, P903.09 Flowflex Brass Compression Female Adaptor 12mm x ½”, P903.10 Flowflex Brass Compression Female Adaptor 15mm x ¼”, P903.11 Flowflex Brass Compression Female Adaptor 15mm x 3/8”, P903.12 Flowflex Brass Compression Female Adaptor 15mm x ½”, P903.14 Flowflex Brass Compression Female Adaptor 15mm x ¾”, P903.141 Flowflex Brass Compression Female Adaptor 15mm x 1”, P903.17 Flowflex Brass Compression Female Adaptor 22mm x ½”, P903.18 Flowflex Brass Compression Female Adaptor 22mm x ¾”, P903.19 Flowflex Brass Compression Female Adaptor 22mm x 1”, P903.196 Flowflex Brass Compression Female Adaptor 28mm x ½”, P903.195 Flowflex Brass Compression Female Adaptor 28mm x ¾”, P903.20 Flowflex Brass Compression Female Adaptor 28mm x 1”, P903.201 Flowflex Brass Compression Female Adaptor 28mm x 1 ¼”, OP903.12 Opal Brass Compression Female Adaptor 15mm x ½”, OP903.14 Opal Brass Compression Female Adaptor 15mm x ¾”, OP903.17 Opal Brass Compression Female Adaptor 22mm x ½”, OP903.18 Opal Brass Compression Female Adaptor 22mm x ¾”, OP903.19 Opal Brass Compression Female Adaptor 22mm x 1”, OP903.20 Opal Brass Compression Female Adaptor 28mm x 1”, L903.02 Lamontite Brass Compression Female Adaptor 8mm x 3/8”, L903.03 Lamontite Brass Compression Female Adaptor 8mm x ½”, L903.05 Lamontite Brass Compression Female Adaptor 10mm x 3/8”, L903.06 Lamontite Brass Compression Female Adaptor 10mm x ½”, L903.08 Lamontite Brass Compression Female Adaptor 12mm x 3/8”, L903.09 Lamontite Brass Compression Female Adaptor 12mm x ½”, L903.10 Lamontite Brass Compression Female Adaptor 15mm x ¼”, L903.11 Lamontite Brass Compression Female Adaptor 15mm x 3/8” L903.12 Lamontite Brass Compression Female Adaptor 15mm x ½”, L903.14 Lamontite Brass Compression Female Adaptor 15mm x ¾”, L903.17 Lamontite Brass Compression Female Adaptor 22mm x ½”, L903.18 Lamontite Brass Compression Female Adaptor 22mm x ¾”, L903.19 Lamontite Brass Compression Female Adaptor 22mm x 1”, L903.196 Lamontite Brass Compression Female Adaptor 28mm x ½”, L903.195 Lamontite Brass Compression Female Adaptor 28mm x ¾”, L903.20 Lamontite Brass Compression Female Adaptor 28mm x 1”, P903DR.05 Flowflex DZR Brass Compression Female Adaptor 10mm x 3/8”, P903DR.06 Flowflex DZR Brass Compression Female Adaptor 10mm x ½”, P903DR.08 Flowflex DZR Brass Compression Female Adaptor 12mm x 3/8”, P903DR.09 Flowflex DZR Brass Compression Female Adaptor 12mm x ½”, P903DR.11 Flowflex DZR Brass Compression Female Adaptor 15mm x 3/8”, P903DR.12 Flowflex DZR Brass Compression Female Adaptor 15mm x ½”, P903DR.14 Flowflex DZR Brass Compression Female Adaptor 15mm x ¾”, P903DR.17 Flowflex DZR Brass Compression Female Adaptor 22mm x ½”, P903DR.18 Flowflex DZR Brass Compression Female Adaptor 22mm x ¾”, P903DR.19 Flowflex DZR Brass Compression Female Adaptor 22mm x 1”, P903DR.195 Flowflex DZR Brass Compression Female Adaptor 28mm x ¾”, P903DR.20 Flowflex DZR Brass Compression Female Adaptor 28mm x 1”, L903DR.06 Lamontite DZR Brass Compression Female Adaptor 10mm x ½", L903DR.08 Lamontite DZR Brass Compression Female Adaptor 12mm x 3/8”, L903DR.09 Lamontite DZR Brass Compression Female Adaptor 12mm x ½”, L903DR.12 Lamontite DZR Brass Compression Female Adaptor 15mm x ½”, L903DR.14 Lamontite DZR Brass Compression Female Adaptor 15mm x ¾”, L903DR.18 Lamontite DZR Brass Compression Female Adaptor 22mm x ¾”, L903DR.19 Lamontite DZR Brass Compression Female Adaptor 22mm x 1”, L903DR.20 Lamontite DZR Brass Compression Female Adaptor 28mm x 1”, P903SF.1 Flowflex Brass Compression Straight Tap Connector 15mm x ½”, P903SF.2 Flowflex Brass Compression Straight Tap Connector 15mm x ¾”, P903SF.3 Flowflex Brass Compression Straight Tap Connector 22mm x ¾”, OP903SF.1 Opal Brass Compression Straight Tap Connector 15mm x ½”, OP903SF.2 Opal Brass Compression Straight Tap Connector 15mm x ¾”, OP903SF.3 Opal Brass Compression Straight Tap Connector 22mm x ¾”, P903SFDR.1 Flowflex Brass DZR Compression Straight Tap Connector 15mm x ½”, P903SFDR.3 Flowflex Brass DZR Compression Straight Tap Connector 22mm x ¾”, L903SFDR.1 Lamontite Brass DZR Compression Straight Tap Connector 15mm x ½”, L903SFDR.3 Lamontite Brass DZR Compression Straight Tap Connector 22mm x ¾”, P921.1 Flowflex Brass Compression Tank Connector 15mm, P921.2 Flowflex Brass Compression Tank Connector 22mm, P921.3 Flowflex Brass Compression Tank Connector 28mm, OP921.1 Opal Brass Compression Tank Connector 15mm, OP921.2 Opal Brass Compression Tank Connector 22mm, OP921.3 Opal Brass Compression Tank Connector 28mm, L921.2 Lamontite Brass Compression Tank Connector 22mm, L921.3 Lamontite Brass Compression Tank Connector 28mm, P921DR.1 Flowflex DZR Brass Compression Tank Connector 15mm, P921DR.2 Flowflex DZR Brass Compression Tank Connector 22mm, P921DR.3 Flowflex DZR Brass Compression Tank Connector 28mm, L921DR.1 Lamontite DZR Brass Compression Tank Connector 15mm, L921DR.2 Lamontite DZR Brass Compression Tank Connector 22mm, L921DR.3 Lamontite DZR Brass Compression Tank Connector 28mm, P903ST.1 Flowflex Brass Compression Female Adaptor Short Thread 15mm x ½”, P903ST.2 Flowflex Brass Compression Female Adaptor Short Thread 15mm x ¾”, P903ST.3 Flowflex Brass Compression Female Adaptor Short Thread 22mm x ¾”, J17DR.15 Flowflex DZR Brass Compression One Piece Reducer 10 x 8mm, J17DR.155 Flowflex DZR Brass Compression One Piece Reducer 12 x 8mm, J17DR.16 Flowflex DZR Brass Compression One Piece Reducer 12 x 10mm, J17DR.165 Flowflex DZR Brass Compression One Piece Reducer 15 x 8mm, J17DR.17 Flowflex DZR Brass Compression One Piece Reducer 15 x 10mm, J17DR.18 Flowflex DZR Brass Compression One Piece Reducer 15 x 12mm, J17DR.209 Flowflex DZR Brass Compression One Piece Reducer 22 x 12mm, J17DR.21 Flowflex DZR Brass Compression One Piece Reducer 22 x 15mm, J17DR.27 Flowflex DZR Brass Compression One Piece Reducer 28 x 12mm, J17DR.28 Flowflex DZR Brass Compression One Piece Reducer 28 x 15mm, J17DR.29 Flowflex DZR Brass Compression One Piece Reducer 28 x 22mm, P168DR.005 Flowflex DZR Brass Compression Three Piece Reducing Set 10 x 8mm, P168DR.003 Flowflex DZR Brass Compression Three Piece Reducing Set 12 x 8mm, P168DR.006 Flowflex DZR Brass Compression Three Piece Reducing Set 12 x 10mm, P168DR.01 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 8mm, P168DR.02 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 10mm, P168DR.03 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 12mm, P168DR.004 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 12mm, P168DR.04 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 15mm, P168DR.05 Flowflex DZR Brass Compression Three Piece Reducing Set 28 x 15mm, P168DR.06 Flowflex DZR Brass Compression Three Piece Reducing Set 28 x 22mm, P168DR.064 Flowflex DZR Brass Compression Three Piece Reducing Set 35 x 15mm, P168DR.065 Flowflex DZR Brass Compression Three Piece Reducing Set 35 x 22mm, P168DR.07 Flowflex DZR Brass Compression Three Piece Reducing Set 35 x 28mm, P168DR.075 Flowflex DZR Brass Compression Three Piece Reducing Set 42 x 15mm, P168DR.076 Flowflex DZR Brass Compression Three Piece Reducing Set 42 x 22mm, P168DR.08 Flowflex DZR Brass Compression Three Piece Reducing Set 42 x 28mm, P168DR.010 Flowflex DZR Brass Compression Three Piece Reducing Set 54 x 15mm, P168DR.110 Flowflex DZR Brass Compression Three Piece Reducing Set 54 x 22mm, P168DR.1101 Flowflex DZR Brass Compression Three Piece Reducing Set 54 x 28mm, P923.1 Flowflex Brass Compression Stop End 8mm, P923.2 Flowflex Brass Compression Stop End 10mm, P923.3 Flowflex Brass Compression Stop End 12mm, P923.4 Flowflex Brass Compression Stop End 15mm, P923.5 Flowflex Brass Compression Stop End 22mm, P923.7 Flowflex Brass Compression Stop End 28mm, OP923.4 Opal Brass Compression Stop End 15mm, OP923.5 Opal Brass Compression Stop End 22mm, OP923.6 Opal Brass Compression Stop End 28mm, L923.3 Lamontite Brass Compression Stop End 12mm, L923.4 Lamontite Brass Compression Stop End 15mm, L923.5 Lamontite Brass Compression Stop End 22mm, L923.6 Lamontite Brass Compression Stop End 28mm, P923DR.1 Flowflex DZR Brass Compression Stop End 8mm, P923DR.2 Flowflex DZR Brass Compression Stop End 10mm, P923DR.3 Flowflex DZR Brass Compression Stop End 12mm, P923DR.4 Flowflex DZR Brass Compression Stop End 15mm, P923DR.5 Flowflex DZR Brass Compression Stop End 22mm, P923DR.6 Flowflex DZR Brass Compression Stop End 28mm, P923DR.7 Flowflex DZR Brass Compression Stop End 35mm, P923DR.8 Flowflex DZR Brass Compression Stop End 42mm, P923DR.9 Flowflex DZR Brass Compression Stop End 54mm, L923DR.1 Lamontite DZR Brass Compression Stop End 8mm, L923DR.2 Lamontite DZR Brass Compression Stop End 10mm, L923DR.3 Lamontite DZR Brass Compression Stop End 12mm, L923DR.4 Lamontite DZR Brass Compression Stop End 15mm, L923DR.5 Lamontite DZR Brass Compression Stop End 22mm, P801.02 Flowflex Brass Compression Equal Elbow 8mm, P801.03 Flowflex Brass Compression Equal Elbow 10mm, P801.04 Flowflex Brass Compression Equal Elbow 12mm P801.05 Flowflex Brass Compression Equal Elbow 15mm, P801.08 Flowflex Brass Compression Equal Elbow 22mm, P801.09 Flowflex Brass Compression Equal Elbow 28mm, OP801.05 Opal Brass Compression Equal Elbow 15mm, OP801.08 Opal Brass Compression Equal Elbow 22mm, OP801.09 Opal Brass Compression Equal Elbow 28mm, L801.02 Lamontite Brass Compression Equal Elbow 8mm, L801.03 Lamontite Brass Compression Equal Elbow 10mm, L801.04 Lamontite Brass Compression Equal Elbow 12mm, L801.05 Lamontite Brass Compression Equal Elbow 15mm, L801.08 Lamontite Brass Compression Equal Elbow 22mm, L801.09 Lamontite Brass Compression Equal Elbow 28mm, P801DR.02 Flowflex DZR Brass Compression Equal Elbow 8mm, P801DR.03 Flowflex DZR Brass Compression Equal Elbow 10mm, P801DR.04 Flowflex DZR Brass Compression Equal Elbow 12mm, P801DR.05 Flowflex DZR Brass Compression Equal Elbow 15mm, P801DR.08 Flowflex DZR Brass Compression Equal Elbow 22mm, P801DR.09 Flowflex DZR Brass Compression Equal Elbow 28mm, L801DR.02 Lamontite DZR Brass Compression Equal Elbow 8mm, L801DR.03 Lamontite DZR Brass Compression Equal Elbow 10mm, L801DR.04 Lamontite DZR Brass Compression Equal Elbow 12mm, L801DR.05 Lamontite DZR Brass Compression Equal Elbow 15mm, L801DR.08 Lamontite DZR Brass Compression Equal Elbow 22mm, L801DR.09 Lamontite DZR Brass Compression Equal Elbow 28mm, P801.035 Flowflex Brass Compression Reducing Elbow 12 x 10mm, P801.036 Flowflex Brass Compression Reducing Elbow 15 x 10mm, P801.055 Flowflex Brass Compression Reducing Elbow 15 x 12mm, P801.085 Flowflex Brass Compression Reducing Elbow 22 x 15mm, P801.092 Flowflex Brass Compression Reducing Elbow 28 x 15mm, P801.098 Flowflex Brass Compression Reducing Elbow 28 x 22mm, L801.035 Lamontite Brass Compression Reducing Elbow 12 x 10mm, L801.036 Lamontite Brass Compression Reducing Elbow 15 x 10mm, L801.055 Lamontite Brass Compression Reducing Elbow 15 x 12mm, L801.085 Lamontite Brass Compression Reducing Elbow 22 x 15mm, L801.092 Lamontite Brass Compression Reducing Elbow 28 x 15mm, L801.098 Lamontite Brass Compression Reducing Elbow 28 x 22mm, P801DR.085 Flowflex DZR Brass Compression Reducing Elbow 22 x 15mm, P802.01 Flowflex Brass Compression Male Elbow 8mm x ¼”, P802.02 Flowflex Brass Compression Male Elbow 10mm x ¼”, P802.03 Flowflex Brass Compression Male Elbow 10mm x 3/8”, P802.031 Flowflex Brass Compression Male Elbow 10mm x ½”, P802.04 Flowflex Brass Compression Male Elbow 12mm x ¼”, P802.05 Flowflex Brass Compression Male Elbow 12mm x 3/8”, P802.051 Flowflex Brass Compression Male Elbow 12mm x ½”, P802.07 Flowflex Brass Compression Male Elbow 15mm x 3/8”, P802.08 Flowflex Brass Compression Male Elbow 15mm x ½”, P802.09 Flowflex Brass Compression Male Elbow 15mm x ¾”, P802.11 Flowflex Brass Compression Male Elbow 22mm x ½”, P802.12 Flowflex Brass Compression Male Elbow 22mm x ¾”, P802.13 Flowflex Brass Compression Male Elbow 22mm x 1”, P802.141 Flowflex Brass Compression Male Elbow 28mm x ¾”, P802.14 Flowflex Brass Compression Male Elbow 28mm x 1”, OP802.08 Opal Brass Compression Male Elbow 15mm x ½”, OP802.12 Opal Brass Compression Male Elbow 22mm x ¾”, OP802.13 Opal Brass Compression Male Elbow 22mm x 1”, OP802.141 Opal Brass Compression Male Elbow 28mm x ¾”, OP802.14 Opal Brass Compression Male Elbow 28mm x 1”, L802.07 Lamontite Brass Compression Male Elbow 15mm x 3/8”, L802.08 Lamontite Brass Compression Male Elbow 15mm x ½”, L802.09 Lamontite Brass Compression Male Elbow 15mm x ¾”, L802.11 Lamontite Brass Compression Male Elbow 22mm x ½”, L802.12 Lamontite Brass Compression Male Elbow 22mm x ¾”, L802.13 Lamontite Brass Compression Male Elbow 22mm x 1”, L802.141 Lamontite Brass Compression Male Elbow 28mm x ¾”, L802.14 Lamontite Brass Compression Male Elbow 28mm x 1”, P802DR.01 Flowflex DZR Brass Compression Male Elbow 8mm x ¼”, P802DR.015 Flowflex DZR Brass Compression Male Elbow 8mm x 3/8”, P802DR.03 Flowflex DZR Brass Compression Male Elbow 10mm x 3/8”, P802DR.031 Flowflex DZR Brass Compression Male Elbow 10mm x ½”, P802DR.05 Flowflex DZR Brass Compression Male Elbow 12mm x 3/8”, P802DR.051 Flowflex DZR Brass Compression Male Elbow 12mm x ½”, P802DR.07 Flowflex DZR Brass Compression Male Elbow 15mm x 3/8”, P802DR.08 Flowflex DZR Brass Compression Male Elbow 15mm x ½”, P802DR.09 Flowflex DZR Brass Compression Male Elbow 15mm x ¾”, P802DR.11 Flowflex DZR Brass Compression Male Elbow 22mm x ½”, P802DR.12 Flowflex DZR Brass Compression Male Elbow 22mm x ¾”, P802DR.13 Flowflex DZR Brass Compression Male Elbow 22mm x 1”, P802DR.14 Flowflex DZR Brass Compression Male Elbow 28mm x 1”, L802DR.05 Lamontite DZR Brass Compression Male Elbow 12mm x 3/8”, L802DR.051 Lamontite DZR Brass Compression Male Elbow 12mm x ½”, L802DR.07 Lamontite DZR Brass Compression Male Elbow 15mm x 3/8”, L802DR.08 Lamontite DZR Brass Compression Male Elbow 15mm x ½”, L802DR.09 Lamontite DZR Brass Compression Male Elbow 15mm x ¾”, L802DR.12 Lamontite DZR Brass Compression Male Elbow 22mm x ¾”, L802DR.13 Lamontite DZR Brass Compression Male Elbow 22mm x 1”, L802DR.14 Lamontite DZR Brass Compression Male Elbow 28mm x 1”, P802T.04 Flowflex Brass Compression Male Taper Elbow 8mm x ¼”, P802T.045 Flowflex Brass Compression Male Taper Elbow 8mm x 3/8”, P802T.05 Flowflex Brass Compression Male Taper Elbow 10mm x ¼”, P802T.06 Flowflex Brass Compression Male Taper Elbow 10mm x 3/8”, P802T.07 Flowflex Brass Compression Male Taper Elbow 10mm x ½”, P802T.08 Flowflex Brass Compression Male Taper Elbow 12mm x ¼”, P802T.09 Flowflex Brass Compression Male Taper Elbow 12mm x 3/8”, P802T.10 Flowflex Brass Compression Male Taper Elbow 12mm x ½”, P802T.12 Flowflex Brass Compression Male Taper Elbow 15mm x 3/8”, P802T.13 Flowflex Brass Compression Male Taper Elbow 15mm x ½”, P802T.131 Flowflex Brass Compression Male Taper Elbow 15mm x ¾”, P802T.139 Flowflex Brass Compression Male Taper Elbow 22mm x ½”, P802T.14 Flowflex Brass Compression Male Taper Elbow 22mm x ¾”, P802T.15 Flowflex Brass Compression Male Taper Elbow 22mm x 1”, P802T.159 Flowflex Brass Compression Male Taper Elbow 28mm x ¾”, P802T.16 Flowflex Brass Compression Male Taper Elbow 28mm x 1”, OP802T.13 Opal Brass Compression Male Taper Elbow 15mm x ½”, OP802T.14 Opal Brass Compression Male Taper Elbow 22mm x ¾”, L802T.06 Lamontite Brass Compression Male Taper Elbow 10mm x 3/8”, L802T.09 Lamontite Brass Compression Male Taper Elbow 12mm x 3/8”, L802T.10 Lamontite Brass Compression Male Taper Elbow 12mm x ½”, L802T.12 Lamontite Brass Compression Male Taper Elbow 15mm x 3/8”, L802T.13 Lamontite Brass Compression Male Taper Elbow 15mm x ½”, L802T.14 Lamontite Brass Compression Male Taper Elbow 22mm x ¾”, P802TDR.06 Flowflex DZR Brass Compression Male Taper Elbow 10mm x 3/8”, P802TDR.07 Flowflex DZR Brass Compression Male Taper Elbow 10mm x ½”, P802TDR.05 Flowflex DZR Brass Compression Male Taper Elbow 12mm x 3/8”, P802TDR.10 Flowflex DZR Brass Compression Male Taper Elbow 12mm x ½”, P802TDR.12 Flowflex DZR Brass Compression Male Taper Elbow 15mm x 3/8”, P802TDR.13 Flowflex DZR Brass Compression Male Taper Elbow 15mm x ½”, P802TDR.131 Flowflex DZR Brass Compression Male Taper Elbow 15mm x ¾”, P802TDR.14 Flowflex DZR Brass Compression Male Taper Elbow 22mm x ¾”, P802TDR.15 Flowflex DZR Brass Compression Male Taper Elbow 22mm x 1”, P802TDR.16 Flowflex DZR Brass Compression Male Taper Elbow 28mm x 1”, L802TDR.13 Lamontite DZR Brass Compression Male Taper Elbow 15mm x ½”, P803.01 Flowflex Brass Compression Female Elbow 8mm x ¼”, P803.012 Flowflex Brass Compression Female Elbow 8mm x ½”, P803.02 Flowflex Brass Compression Female Elbow 10mm x ¼”, P803.03 Flowflex Brass Compression Female Elbow 10mm x 3/8”, P803.031 Flowflex Brass Compression Female Elbow 10mm x ½”, P803.04 Flowflex Brass Compression Female Elbow 12mm x ¼”, P803.05 Flowflex Brass Compression Female Elbow 12mm x 3/8”, P803.051 Flowflex Brass Compression Female Elbow 12mm x ½”, P803.055 Flowflex Brass Compression Female Elbow 15mm x 3/8”, P803.06 Flowflex Brass Compression Female Elbow 15mm x ½”, P803.063 Flowflex Brass Compression Female Elbow 15mm x ¾”, P803.068 Flowflex Brass Compression Female Elbow 22mm x ½”, P803.07 Flowflex Brass Compression Female Elbow 22mm x ¾”, P803.08 Flowflex Brass Compression Female Elbow 22mm x 1”, P803.009 Flowflex Brass Compression Female Elbow 28mm x ½”, P803.085 Flowflex Brass Compression Female Elbow 28mm x ¾”, P803.09 Flowflex Brass Compression Female Elbow 28mm x 1”, P803.11 Flowflex Brass Compression Female Elbow 42mm x 1 ½”, OP803.06 Opal Brass Compression Female Elbow 15mm x ½”, OP803.07 Opal Brass Compression Female Elbow 22mm x ¾”, OP803.08 Opal Brass Compression Female Elbow 22mm x 1”, OP803.09 Opal Brass Compression Female Elbow 28mm x 1”, L803.03 Lamontite Brass Compression Female Elbow 10mm x 3/8”, L803.031 Lamontite Brass Compression Female Elbow 10mm x ½”, L803.05 Lamontite Brass Compression Female Elbow 12mm x 3/8”, L803.051 Lamontite Brass Compression Female Elbow 12mm x ½”, L803.055 Lamontite Brass Compression Female Elbow 15mm x 3/8”, L803.06 Lamontite Brass Compression Female Elbow 15mm x ½”, L803.063 Lamontite Brass Compression Female Elbow 15mm x ¾”, L803.068 Lamontite Brass Compression Female Elbow 22mm x ½”, L803.07 Lamontite Brass Compression Female Elbow 22mm x ¾”, L803.08 Lamontite Brass Compression Female Elbow 22mm x 1”, L803.009 Lamontite Brass Compression Female Elbow 28mm x ½”, L803.085 Lamontite Brass Compression Female Elbow 28mm x ¾”, L803.09 Lamontite Brass Compression Female Elbow 28mm x 1”, P803DR.03 Flowflex DZR Brass Compression Female Elbow 10mm x 3/8”, P803DR.031 Flowflex DZR Brass Compression Female Elbow 10mm x ½”, P803DR.05 Flowflex DZR Brass Compression Female Elbow 12mm x 3/8”, P803DR.051 Flowflex DZR Brass Compression Female Elbow 12mm x ½”, P803DR.055 Flowflex DZR Brass Compression Female Elbow 15mm x 3/8”, P803DR.06 Flowflex DZR Brass Compression Female Elbow 15mm x ½”, P803DR.063 Flowflex DZR Brass Compression Female Elbow 15mm x ¾”, P803DR.068 Flowflex DZR Brass Compression Female Elbow 22mm x ½”, P803DR.07 Flowflex DZR Brass Compression Female Elbow 22mm x ¾”, P803DR.08 Flowflex DZR Brass Compression Female Elbow 22mm x 1”, P803DR.09 Flowflex DZR Brass Compression Female Elbow 28mm x 1”, L803DR.051 Lamontite DZR Brass Compression Female Elbow 12mm x ½”, L803DR.055 Lamontite DZR Brass Compression Female Elbow 15mm x 3/8” L803DR.06 Lamontite DZR Brass Compression Female Elbow 15mm x ½”, L803DR.063 Lamontite DZR Brass Compression Female Elbow 15mm x ¾”, L803DR.07 Lamontite DZR Brass Compression Female Elbow 22mm x ¾”, L803DR.08 Lamontite DZR Brass Compression Female Elbow 22mm x 1”, L803DR.09 Lamontite DZR Brass Compression Female Elbow 28mm x 1”, P803WP.04 Flowflex Brass Compression Wallplate Elbow 10mm x ½”, P803WP.05 Flowflex Brass Compression Wallplate Elbow 12mm x ½”, P803WP.2 Flowflex Brass Compression Wallplate Elbow 15mm x ½”, P803WP.231 Flowflex Brass Compression Wallplate Elbow 15mm x ¾” P803WP.4 Flowflex Brass Compression Wallplate Elbow 22mm x ½”, P803WP.5 Flowflex Brass Compression Wallplate Elbow 22mm x ¾”, OP803WP.2 Opal Brass Compression Wallplate Elbow 15mm x ½”, OP803WP.5 Opal Brass Compression Wallplate Elbow 22mm x ¾”, L803WP.05 Lamontite Brass Compression Wallplate Elbow 12mm x ½”, L803WP.2 Lamontite Brass Compression Wallplate Elbow 15mm x ½”, L803WP.4 Lamontite Brass Compression Wallplate Elbow 22mm x ½”, L803WP.5 Lamontite Brass Compression Wallplate Elbow 22mm x ¾”, P803WPDR.04 Flowflex DZR Brass Compression Wallplate Elbow 10mm x ½”, P803WPDR.045 Flowflex DZR Brass Compression Wallplate Elbow 12mm x 3/8”, P803WPDR.05 Flowflex DZR Brass Compression Wallplate Elbow 12mm x ½”, P803WPDR.2 Flowflex DZR Brass Compression Wallplate Elbow 15mm x ½”, P803WPDR.4 Flowflex DZR Brass Compression Wallplate Elbow 22mm x ½”, P803WPDR.5 Flowflex DZR Brass Compression Wallplate Elbow 22mm x ¾”, L803WPDR.2 Lamontite DZR Brass Compression Wallplate Elbow 15mm x ½”, L803WPDR.5 Lamontite DZR Brass Compression Wallplate Elbow 22mm x ¾”, P803SF.1 Flowflex Brass Compression Bent Tap Connector 15mm x ½”, P803SF.2 Flowflex Brass Compression Bent Tap Connector 22mm x ¾”, OP803SF.1 Opal Brass Compression Bent Tap Connector 15mm x ½”, OP803SF.2 Opal Brass Compression Bent Tap Connector 22mm x ¾”, P803SFDR.1 Flowflex DZR Brass Compression Bent Tap Connector 15mm x ½”, P803SFDR.2 Flowflex Brass Compression Bent Tap Connector 22mm x ¾”, L803SFDR.1 Lamontite DZR Brass Compression Bent Tap Connector 15mm x ½”, P701.02 Flowflex Brass Compression Equal Tee 8mm, P701.03 Flowflex Brass Compression Equal Tee 10mm, P701.04 Flowflex Brass Compression Equal Tee 12mm, P701.05 Flowflex Brass Compression Equal Tee 15mm, P701.08 Flowflex Brass Compression Equal Tee 22mm, P701.09 Flowflex Brass Compression Equal Tee 28mm OP701.05 Opal Brass Compression Equal Tee 15mm, OP701.08 Opal Brass Compression Equal Tee 22mm, OP701.09 Opal Brass Compression Equal Tee 28mm, L701.02 Lamontite Brass Compression Equal Tee 8mm, L701.03 Lamontite Brass Compression Equal Tee 10mm, L701.04 Lamontite Brass Compression Equal Tee 12mm, L701.05 Lamontite Brass Compression Equal Tee 15mm, L701.08 Lamontite Brass Compression Equal Tee 22mm, L701.09 Lamontite Brass Compression Equal Tee 28mm, P701DR.02 Flowflex DZR Brass Compression Equal Tee 8mm, P701DR.03 Flowflex DZR Brass Compression Equal Tee 10mm, P701DR.04 Flowflex DZR Brass Compression Equal Tee 12mm, P701DR.05 Flowflex DZR Brass Compression Equal Tee 15mm, P701DR.08 Flowflex DZR Brass Compression Equal Tee 22mm, P701DR.09 Flowflex DZR Brass Compression Equal Tee 28mm, L701DR.03 Lamontite DZR Brass Compression Equal Tee 10mm, L701DR.04 Lamontite DZR Brass Compression Equal Tee 12mm, L701DR.05 Lamontite DZR Brass Compression Equal Tee 15mm, L701DR.08 Lamontite DZR Brass Compression Equal Tee 22mm, L701DR.09 Lamontite DZR Brass Compression Equal Tee 28mm, P702.0121 Flowflex Brass Compression Reduced Branch Tee 12 x 12 x 10mm, P702.116 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 10mm, P702.125 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 12mm, P702.161 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 12mm, P702.16 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 15mm, P702.19 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 15mm, P702.20 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 22mm, OP702.16 Opal Brass Compression Reduced Branch Tee 22 x 22 x 15mm, OP702.19 Opal Brass Compression Reduced Branch Tee 28 x 28 x 15mm, OP702.20 Opal Brass Compression Reduced Branch Tee 28 x 28 x 22mm, L702.125 Lamontite Brass Compression Reduced Branch Tee 15 x 15 x 12mm, L702.16 Lamontite Brass Compression Reduced Branch Tee 22 x 22 x 15mm, L702.19 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 15mm, L702.20 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 22mm, P702DR.0121 Flowflex Brass Compression Reduced Branch Tee 12 x 12 x 10mm, P702DR.116 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 10mm, P702DR.125 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 12mm, P702DR.161 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 12mm, P702DR.16 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 15mm, P702DR.19 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 15mm, P702DR.20 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 22mm, L702DR.125 Lamontite Brass Compression Reduced Branch Tee 15 x 15 x 12mm, L702DR.16 Lamontite Brass Compression Reduced Branch Tee 22 x 22 x 15mm, L702DR.19 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 15mm, L702DR.20 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 22mm, P703.124 Flowflex Brass Compression Reduced End Tee 15 x 12 x 15mm, P703.15 Flowflex Brass Compression Reduced End Tee 22 x 15 x 22mm, P703.17 Flowflex Brass Compression Reduced End Tee 28 x 15 x 28mm, P703.18 Flowflex Brass Compression Reduced End Tee 28 x 22 x 28mm, OP703.15 Opal Brass Compression Reduced End Tee 22 x 15 x 22mm, L703.15 Lamontite Brass Compression Reduced End Tee 22 x 15 x 22mm, L703.17 Lamontite Brass Compression Reduced End Tee 28 x 15 x 28mm, L703.18 Lamontite Brass Compression Reduced End Tee 28 x 22 x 28mm, P703DR.0120 Flowflex DZR Brass Compression Reduced End Tee 12 x 10 x 12mm, P703DR.123 Flowflex DZR Brass Compression Reduced End Tee 15 x 10 x 15mm, P703DR.124 Flowflex DZR Brass Compression Reduced End Tee 15 x 12 x 15mm, P703DR.137 Flowflex DZR Brass Compression Reduced End Tee 22 x 12 x 22mm, P703DR.15 Flowflex DZR Brass Compression Reduced End Tee 22 x 15 x 22mm, P703DR.17 Flowflex DZR Brass Compression Reduced End Tee 28 x 15 x 28mm, P703DR.18 Flowflex DZR Brass Compression Reduced End Tee 28 x 22 x 28mm, L703DR.124 Lamontite DZR Brass Compression Reduced End Tee 15 x 12 x 15mm, L703DR.15 Lamontite DZR Brass Compression Reduced End Tee 22 x 15 x 22mm, P704.121 Flowflex Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, P704.14 Flowflex Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, P704.168 Flowflex Brass Compression Reduced Branch and End Tee 28 x 15 x 15mm, P704.171 Flowflex Brass Compression Reduced Branch and End Tee 28 x 22 x 22mm, OP704.14 Opal Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, L704.121 Lamontite Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, L704.14 Lamontite Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, L704.168 Lamontite Brass Compression Reduced Branch and End Tee 28 x 15 x 15mm, L704.171 Lamontite Brass Compression Reduced Branch and End Tee 28 x 22 x 22mm, L704.2254 Lamontite Brass Compression Reduced Branch and End Tee 42 x 35 x 35mm, P704DR.120 Flowflex DZR Brass Compression Reduced Branch and End Tee 12 x 10 x 10mm, P704DR.1201 Flowflex DZR Brass Compression Reduced Branch and End Tee 15 x 10 x 10mm, P704DR.121 Flowflex DZR Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, P704DR.14 Flowflex DZR Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, P704DR.168 Flowflex DZR Brass Compression Reduced Branch and End Tee 28 x 15 x 15mm, P704DR.171 Flowflex DZR Brass Compression Reduced Branch and End Tee 28 x 22 x 22mm, L704DR.121 Lamontite DZR Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, L704DR.14 Lamontite DZR Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, P705.123 Flowflex Brass Compression Reduced Both Ends Tee 12 x 12 x 15mm, P705.13 Flowflex Brass Compression Reduced Both Ends Tee 15 x 15 x 22mm, P705.165 Flowflex Brass Compression Reduced Both Ends Tee 22 x 22 x 28mm, L705.123 Lamontite Brass Compression Reduced Both Ends Tee 12 x 12 x 15mm, L705.13 Lamontite Brass Compression Reduced Both Ends Tee 15 x 15 x 22mm, L705.165 Lamontite Brass Compression Reduced Both Ends Tee 22 x 22 x 28mm, P705DR.123 Flowflex Brass Compression Reduced Both Ends Tee 12 x 12 x 15mm, P705DR.13 Flowflex Brass Compression Reduced Both Ends Tee 15 x 15 x 22mm, P717.04 Flowflex Brass Compression Female Branch Tee 10 x 10mm x ½”, P717.03 Flowflex Brass Compression Female Branch Tee 12 x 12mm x 3/8”, P717.06 Flowflex Brass Compression Female Branch Tee 12 x 12mm x ½”, P717.1 Flowflex Brass Compression Female Branch Tee 15 x 15mm x ½”, P717.14 Flowflex Brass Compression Female Branch Tee 15 x 15mm x ¾”, P717.19 Flowflex Brass Compression Female Branch Tee 22 x 22mm x 3/8”, P717.2 Flowflex Brass Compression Female Branch Tee 22 x 22mm x ½”, P717.3 Flowflex Brass Compression Female Branch Tee 22 x 22mm x ¾”, P717.35 Flowflex Brass Compression Female Branch Tee 22 x 22mm x 1”, P717.5 Flowflex Brass Compression Female Branch Tee 28 x 28mm x ½”, P717.6 Flowflex Brass Compression Female Branch Tee 28 x 28mm x ¾”, P717.4 Flowflex Brass Compression Female Branch Tee 28 x 28mm x 1”, L717.1 Lamontite Brass Compression Female Branch Tee 15 x 15mm x ½”, L717.2 Lamontite Brass Compression Female Branch Tee 22 x 22mm x ½”, L717.3 Lamontite Brass Compression Female Branch Tee 22 x 22mm x ¾”, L717.5 Lamontite Brass Compression Female Branch Tee 28 x 28mm x ½”, L717.6 Lamontite Brass Compression Female Branch Tee 28 x 28mm x ¾”, L717.4 Lamontite Brass Compression Female Branch Tee 28 x 28mm x 1”, P717DR.03 Flowflex DZR Brass Compression Female Branch Tee 12 x 12mm x 3/8”, P717DR.06 Flowflex DZR Brass Compression Female Branch Tee 12 x 12mm x ½”, P717DR.08 Flowflex DZR Brass Compression Female Branch Tee 15 x 15mm x 3/8”, P717DR.1 Flowflex DZR Brass Compression Female Branch Tee 15 x 15mm x ½”, P717DR.2 Flowflex DZR Brass Compression Female Branch Tee 22 x 22mm x ½”, P717DR.3 Flowflex DZR Brass Compression Female Branch Tee 22 x 22mm x ¾”, L717DR.1 Lamontite DZR Brass Compression Female Branch Tee 15 x 15mm x ½”, L717DR.3 Lamontite DZR Brass Compression Female Branch Tee 22 x 22mm x ¾”, P737.1 Flowflex Brass Compression Female End Tee 15 x ½” x 15mm, P737.15 Flowflex Brass Compression Female End Tee 15 x ¾” x 15mm, P737.2 Flowflex Brass Compression Female End Tee 22 x ½” x 22mm, P737.3 Flowflex Brass Compression Female End Tee 22 x ¾” x 22mm, P737.4 Flowflex Brass Compression Female End Tee 28 x ½” x 28mm, L737.1 Lamontite Brass Compression Female End Tee 15 x ½” x 15mm, P737DR.1 Flowflex DZR Brass Compression Female End Tee 15 x ½” x 15mm, P737DR.4 Flowflex DZR Brass Compression Female End Tee 28 x ½” x 28mm, P707.1 Flowflex Brass Compression Crossover 15mm, P707.2 Flowflex Brass Compression Crossover 22mm, P707.3 Flowflex Brass Compression Crossover 28mm, L707.01 Lamontite Brass Compression Crossover 15mm, L707.02 Lamontite Brass Compression Crossover 22mm, L707.03 Lamontite Brass Compression Crossover 28mm.

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Aquaflow range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207382

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

Aquaflow, PN & size on nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

324A*****Q TEE REDUCING-AQUAFLOW 320******Q ADAPTOR MALE-AQUAFLOW 320A*****Q ADAPTOR FEMALE-AQUAFLOW 320B*****Q END PLUG-AQUAFLOW 321******Q COUPLING-AQUAFLOW 321A*****Q REDUCING COUPLING-AQUAFLOW 322******Q ELBOW-AQUAFLOW 322A*****Q ELBOW THREADED MALE-AQUAFLOW 322B*****Q ELBOW THREADED FEMALE-AQUAFLOW 322C*****Q ELBOW POP-UP-AQUAFLOW 322D*****Q WALL ELBOW-AQUAFLOW 323******Q TEE THREADED FEMALE-AQUAFLOW 323A*****Q TEE THREADED MALE-AQUAFLOW 323C*****Q CROSS TEE-AQUAFLOW 324******Q TEE 90°-AQUAFLOW 324B*****Q TEE INCREASING-AQUAFLOW 320C*****Q FLANGED ADAPTOR -AQUAFLOW 320D*****Q FLANGED ADAPTOR-AQUAFLOW 321B*****Q REPAIR COUPLING-AQUAFLOW 321C*****Q CONVERSION REDUCER/UNIVERSAL ADAPTOR-AQUAFLOW 321D***** GLOBAL TRANSITION COUPL. -AQUAFLOW Where XXX-YYY-ZZZ for product family codes with only 3 digits 330 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) Xxx(x)-yyy-zz for product family codes with e alter as a firth digit 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter.

Approval Holder:

Kalsi Plastics (UK) Limited

Company Name

Kalsi Plastics (UK) Limited

Address

Kalsi House 5 Tomey Road Sparkhill

Postcode

B11 2NJ

Country

Birmngham

General Email

george.argiropoulos@elysee.com.cy

View All Listings by this Company

Range of black polyethylene electrofusion fittings for use with PE100 pipe (manufactured to EN 12201-2). Please refer to model for maximum working pressures. For below ground and cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211026

Size:

DN20 – DN400.

Marking:

Euro, PE100, size, SDR, PN and date of manufacture (MM/YY) on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2027

Model:

For use with SDR7.4 pipe – maximum working pressure 25.0 bar: 21.00.25 Electrofusion Socket: DN20 to DN315. 21.11.25 90° Electrofusion Elbow: DN25 to DN200. 21.16.25 45° Electrofusion Elbow: DN32 to DN160. 21.36.25 Electrofusion Cap: DN20 to DN160. For use with SDR11 pipe - maximum working pressure 16.0 bar: 21.00.16 Electrofusion Socket: DN75 to DN160. 21.11.16 90° Electrofusion Elbow: DN25 to DN200. 21.16.16 45° Electrofusion Elbow: DN32 to DN160. 21.36.16 Electrofusion Cap: DN75 to DN160. 21.21.16 90° Electrofusion Tee: DN25 to DN200. 21.20.16 & 21.20.16 A Electrofusion Spigot Saddle: DN40 to DN250. 21.51.16 Electrofusion Reducer: DN32 x DN20 to DN160 x DN125 For use with SDR17 pipe - maximum working pressure 10.0 bar: 21.00.10 Electrofusion Socket: DN400.

Product Images

Approval Holder:

EUROSTANDARD S.p.A.

Company Name

EUROSTANDARD S.p.A.

Address

Zona Industriale Lago, 22 Tesero (TN)

Postcode

38038

Country

Italy

Phone

+39.(0)462.811211

General Email

quality@eurostandard.it

View All Listings by this Company

Manufacturer:

EUROSTANDARD S.p.A.

Company Name

EUROSTANDARD S.p.A.

Address

Zona Industriale Lago, 22 Tesero (TN)

Postcode

38038

Country

Italy

Phone

+39.(0)462.811211

General Email

quality@eurostandard.it

View All Listings by this Company

Dual flush WC outlet valve incorporating an ABS body, operated via a push button assembly or a battery powered infra red sensor for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2210301

Size:

2” BSP (M).

Marking:

NAT® on body.

Installation Requirements:

R001 R581

Expiry date:

31/10/2027

Model:

NB109-2 Touchless Sensor Flush Valve 3L/6L.

Approval Holder:

Xiamen Nat Plumbing Inc.

Company Name

Xiamen Nat Plumbing Inc.

Address

No.1, West Houxiang Road, Haicang District, Xiamen

Country

China

Phone

86-592-6538317

View All Listings by this Company

Manufacturer:

Xiamen Nat Plumbing Inc.

Company Name

Xiamen Nat Plumbing Inc.

Address

No.1, West Houxiang Road, Haicang District, Xiamen

Country

China

Phone

86-592-6538317

View All Listings by this Company

Range of plate heat exchangers with stainless steel plates, for primary and secondary circulation. Models E040-2M-GB6 and R040-H2M-G6B are secondary use only. Maximum working pressure - R040-HNM-G6B range = 30.0 Bar and E040-NM-GB6 range = 20.0 Bar Maximum operating temperature - 99 °C

Section:

1350 Heat Exchangers

Size:

3/4" BSP Male

Marking:

Kaori Logo, Model, Max Pressure & Max Temp on Adhesive Label on Body. Model on Top Plate.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

R040-HNM-G6B - “N” = Number of plates 2-40 plates E040-NM-GB6 - “N” = Number of plates 2-60 plates

Approval Holder:

Kaori Heat Treatment Co., Ltd

Company Name

Kaori Heat Treatment Co., Ltd

Address

No 5-2 Chi Lin North Road Chung Li District 320030

View All Listings by this Company

Manufacturer:

Kaori Heat Treatment Co., Ltd

Company Name

Kaori Heat Treatment Co., Ltd

Address

No 5-2 Chi Lin North Road Chung Li District 320030

View All Listings by this Company

Alfa Laval range of copper brazed and stainless-steel fusion bonded, stainless steel heat exchangers in various sizes ranging from 4 plates to 300 plates. Maximum working pressures and temperatures: CB10, CB11, CB15, CB16, CB16AQ, CB18, CB18AQ & CB18DW: S1/S2 circuit: 5 Bar. S3/S4 circuit 10 Bar. Max working temperature 150°C. CB20 & CB20AQ: S1/S2 circuit: 16 Bar. S3/S4 circuit 16 Bar. Max working temperature 225°C. CB65, CB65AQ & CBH65: S1/S2 circuit: 18 Bar. S3/S4 circuit 37 Bar. Max working temperature 225°C. CBH16 & CBH18: S1/S2 circuit: 32 Bar. S3/S4 circuit 32 Bar. Max working temperature 150°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC. Models added March 2023: CBH30: 50 Bar (S1/S2/S3/S4) & 225.0°C, CBH112: 45 Bar (S1/S2) 51 Bar (S3/S4) & 225.0°C, CB30: 41 Bar (S1/S2/S3/S4) & 225.0°C, CB60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB60AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB30AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB110AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CBH110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB24: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, CB24AQ: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, ANTW66: 29.0 Bar (S1/S2/S3/S4), ANTW18: 23 Bar (S1/S2) 28 Bar (S3/S4) 225.0°C and RM11: 15 Bar (S3/S4) & 225.0°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC.

Section:

1350 Heat Exchangers

Size:

See Models

Marking:

CB10, CB15, CB16, CB18 models: Manufacturers logo, model number and technical information on label on from of heat exchanger. CB20 and CB65 models: Manufacturers logo, model number, serial number, manufacturing date (yyyy.mm.dd), minimum and maximum working temperature, minimum and maximum working pressure and technical information on label on front of heat exchanger. Models added March 2023: Alfa Laval logo, Model, serial number on adhesive label.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

CB10: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB11: Minimum number of plates 8, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB15: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16/CBH16: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18/CBH18: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB18AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18DW: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20: Minimum number of plates 10, Maximum number of plates 110. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20AQ: Minimum number of plates 10, Maximum number of plates 110. Connection Size/types: ¾” or 1” Male BSP connections. CB65/CBH65: Minimum number of plates 10, Maximum number of plates 150. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB65AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” or 1” Male BSP connections Models added March 2023: CB30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB30AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB110AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. RM11: Minimum number of plates 28, Maximum number of plates 28. Connection Size/types: 22mm ID - soldered connection for use with copper tube conforming to EN 1057. CB24: Minimum number of plates 10, Maximum number of plates 56. Connection Size/types: ¾” - 2” BSP M. ANTW18: Minimum number of plates 10, Maximum number of plates 50. Connection Size/types: ¾” - 2” BSP M. ANTW66: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M.

Approval Holder:

Alfa Laval Ltd

Company Name

Alfa Laval Ltd

Address

Doman Road Camberley Surrey

Postcode

GU15 3DN

View All Listings by this Company

Range of static ultrasonic bulk water meters with stainless steel bodies and EPDM 'O'-rings. The products are supplied with two sets of optional (green) gaskets. Maximum operating temperature: Products marked T50: 65°C. Products marked T30: cold water use only.

Section:

1505 Water Meters

Size:

DN50 - DN100 flanged inlet and outlet.

Marking:

DIEHL METERING, CE, DN, maximum pressure, model name, T30 or T90, and other technical info on meter housing. Diehl Metering GmbH logo and flow arrow on body.

Installation Requirements:

R001 R008 R120

Expiry date:

31/03/2027

Model:

HYDRUS 2.0 Type 174 stainless steel (DN50-80: 200mm length, DN100: 250mm length).

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Range of solid copper alloy and bi-metallic flanges. Solid models are bronze, bi- metallic models are bronze with an epoxy coated steel outer flange.

Section:

1530 Miscellaneous Fittings

Size:

15, 22, 28, 35, 42, 54, 66.7, 76.1, 108, 133, 159, 219mm. (DN10 - DN200).

Marking:

BS EN1092.3, PN, DN and AL on body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

FLSG07/16- 15mm to 219mm. FLSG05C/16- 15mm to 219mm. FLG14/16- 15mm to 219mm. FLSG02/25- 15mm to 219mm. FLSG05C/25- 15mm to 219mm. FLG14/25- 15mm to 219mm.

Approval Holder:

Allpex Ltd.

Company Name

Allpex Ltd.

Address

261 Water Road, Abbeydale Industrial Estate, Wembley Middlesex

Postcode

HA0 1HX

Country

United Kingdom

Phone

00 44 208 810 4546

General Email

product@allpex.com

View All Listings by this Company

Range of tee pieces with nickel plated brass bodies. Models 0912/15CVCC & 0912/CVCC incorporate a non-return valve (not suitable for backflow prevention) and stainless steel retaining clip. Compression connections to be used with copper pipe to BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85˚C.

Section:

1530 Miscellaneous Fittings

Size:

see model

Marking:

Altecnic logo, casting date YYWW moulded on body

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

0912/22CC 22mm comp x 22mm spigot x 22mm spigot tee (22mm compression x 22mm tails) 0912/22CVCC 22mm comp x 22mm spigot x 22mm spigot tee c/w non return valve (22mm compression x 22mm tails) 0912/15CVCC 15mm comp x 15mm spigot x 15mm spigot tee c/w non return valve (15mm compression x 15mm tails) 0912/15CC 15mm comp x 15mm spigot x 15mm spigot (15mm compression x 15mm tails)

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of twin shower booster pumps with plastic bodies and impellers. The pump body inlet incorporates a combined EPDM washer and stainless steel strainer. Maximum working pressure: D01695 model 1.5 bar D01696 model 2.0 bar. Maximum operating temperature 65°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2212706

Size:

Stainless steel braided EPDM lined flexible hose assemblies with a 15mm standpipe connection on inlets and outlets.

Marking:

Center & Center Wolseley and technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/12/2027

Model:

D01695 CENTER SHOWER PUMP 1.5 BAR TWIN D01696 CENTER SHOWER PUMP 2.0 BAR TWIN

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Note:

R008 does not apply to the stainless steel body models.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of water pressure booster pumps, comprising of a multi-stage pump with a brass body, and an expansion vessel. The product is supplied with a strainer and two stainless steel braided EPDM lined flexible hose assemblies. The outlet assembly incorporates a non-return valve, not suitable for backflow protection. Maximum working pressure models 46601 and 46602 6.0 bar, models 46622 and 46624 9.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211024

Size:

1” BSP (F) (to strainer).

Marking:

STUART TURNER, CE, model number, maximum temperature, maximum pressure and other technical Info on adhesive label on pump.

Installation Requirements:

R001 R415

Expiry date:

30/11/2027

Model:

46601: Stuart CH 4-30 PS, 46602: Stuart CH 4-40 PS, 44622: Stuart CH 4-50 PS, 44624: Stuart CH 4-60 PS.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of centrifugal multi-stage horizontal pressure booster pumps with brass bodies. The 46593, 46594, 46595 and 46610 models include a non-return valve (not suitable for backflow protection) and an expansion vessel. They are also supplied inline strainer and two stainless steel braided EPDM lined flexible hose assemblies with 1” captive nut x 1" BSP (M) end connection for the inlet and outlet. Maximum working pressure models 46578, 46596, 46605 and 46606: 6.0 bar, Models 46593, 46594, 46595 and 46610: 9.0 bar. Maximum operating temperature 65°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211047

Size:

46578, 46596, 46605 and 46606 models: 1” BSP (F). 46593, 46594, 46595 and 46610 models: 1” BSP (F) (to strainer).

Marking:

Stuart Turner and Stuart Turner logo on adhesive label on body

Installation Requirements:

R001 R415

Expiry date:

30/11/2027

Model:

46578: Stuart CH 4-30 FL, 46596: Stuart CH 4-40 FL, 46605: Stuart CH 4-50 FL, 46606: Stuart CH 4-60 FL. 46593: Stuart CH 4-30 B (with hoses), 46594: Stuart CH 4-40 B (with hoses), 46595: Stuart CH 4-50 B (with hoses), 46610: Stuart CH 4-60 B (with hoses).

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of inline circulation pumps with a plastic body, plastic cover, plastic impellers, and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211038

Size:

¾” BSP (M) & 1” BSP (M).

Marking:

TACO and model on top of pump, Flow arrow on bottom of body. TACO Italia SrL, pressure, and technical information on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

A6PHG01

Product Images

Approval Holder:

Taco Italia S.r.l.

Company Name

Taco Italia S.r.l.

Address

Via Galileo Galilei, 89-91 36066 Sandrigo (VI) Italy

View All Listings by this Company

Manufacturer:

Taco Italia S.r.l.

Company Name

Taco Italia S.r.l.

Address

Via Galileo Galilei, 89-91 36066 Sandrigo (VI) Italy

View All Listings by this Company

Range of shower handsets (chrome plated brass bodies). The shower handset incorporates an approved check valve cartridge with a flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210354

Note:

Open outlet use only.

Size:

1/2” BSP (M)

Marking:

THG on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

66/W Style U9A - West Coast croisillon metal , U9B - West Coast manette metal , U9C - West Coast croisillon guilloché lin , U9D - West Coast manette guillochée lin , U9E - West Coast croisillon onyx noir , U9F - West Coast manette onyx noir , U9G - West Coast croisillon marbre blanc , U9H - West Coast manette marbre blanc , U9I - West Coast manette insert à définir, U9J - West Coast croisillon insert à définir, U9K - Grand Central croisillon metal , U9L - Grand Central manette metal , U9M - Grand Central croisillon onyx noir , U9N - Grand Central manette onyx noir , U9P Grand Central manette insert à définir, U9Q Grand Central croisillon insert à définir, U9R - Grand Central croisillon marbre blanc , U9S - Grand Central manette marbre blanc, U3J – Estrela, U3K – Estrela à manettes, U3L – Estrela insert metal. Finishes A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD Example: U9A(style)66/W(model)A02(Finishes)

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of shower handsets with ABS plastic bodies (various finishes, see models). Maximum operating temperature (see models).

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211019

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

KY-LIN on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

88500075 - Chromium plated (75°C), 88500106 - Satin Blacked (75°C), 88500082 - Chromium plated (75°C), 88500074 - White coloured (60°C), 88500081 - White coloured (60°C), 88500069 – Satin Chromed (60°C), 88500099 - Satin Blacked (75°C), 88500070 - Chromium plated (75°C), 88500062 - White coloured (60°C), 88500061 - Chromium plated (75°C), 88500060 - White coloured (60°C), 88500068 – Satin Chromed (60°C), 88500083 - Chromium plated (75°C), 88500086 - White coloured (60°C), 88500084 - White coloured (60°C), 88500085 - Chromium plated (75°C). Model added October 2024 88500112 - Chromium plated (60 C).

Product Images

Approval Holder:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Manufacturer:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Range of shower handsets with ABS plastic bodies (various finishes, see models).. Maximum operating temperature (see models).

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211020

Note:

Open outlet use only.

Size:

½” BSP male.

Marking:

KY-LIN on body of handset.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

88500056 – White (60°C) 88500057 – Chromium plated (65°C) 88500058 – White (60°C) 88500059 – Chromium plated (65°C)

Product Images

Approval Holder:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Manufacturer:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Range of deck mounted pull-out shower hose and handsets (various plated brass or stainless-steel bodies). The inlet to the shower handsets incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature: 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212709

Note:

Open outlet use only.

Size:

½” BSP (F) captive nut on shower hose.

Marking:

VOLA on head of shower handset

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

VOLA T1-XX, VOLA T1S-XX. Both models are available in either brass or stainless steel, where XX denotes different surface finishes and can be replaced with any of the following: Brass versions: 02 = grey, 04 = blue, 05 = orange, 06 = light green, 08 = yellow, 09 = dark grey, 12 = mocha, 14 = bright red, 15 = dark blue, 16 = chrome, 17 = gloss black, 18 = white, 19 = natural brass 20 = brushed chrome, 21 = carmine red, 25 = pink, 27 = matt black, 28 = matt white, 60 = black, 62 = deep black, 63 = copper, 65 = gold, 68 = nickel. Stainless steel versions: 40 = stainless steel, 62 = brushed black, 64 = brushed copper, 70 = brushed gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Over head shower outlet with a chromium plated brass body, with a swivel function. Inlet incorporates NBR gasket with stainless-steel strainer and a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211308

Note:

Open outlet use only.

Size:

½”BSP (M).

Marking:

Gessi on back plate.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

47289.

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Range of overhead shower outlets with chromium plated plastic bodies. Maximum working temperature 75°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2012112

Note:

For open outlet use only.

Size:

½” BSP (F)

Marking:

DTC 59 (BRAND OF METHVEN) ON CONNECTOR

Installation Requirements:

R001 R040

Expiry date:

31/12/2025

Model:

X-OHEAD- GTSDEF, X-OHEAD- GTSDEFBK & X-OHEAD- RTSDEF

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of overhead showers, shower handsets, shower kits and an angled wall outlet. The ARR-HEAD-CP overhead shower has a brass body and wall mounted arm (chrome plated). The CER-HEAD-C/P overhead shower has a plastic body (chrome plated) and incorporates a combined EPDM washer and stainless steel strainer on the inlet. The shower handsets have plastic bodies (chrome plated). The ARR-SFSRK+O-CP shower kit consists of an angled brass wall outlet (chrome plated), multi-layered PVC lined shower hose (silver external appearance), a plastic bodied shower handset (chrome plated) and a riser rail. The ARR-SFMKWO-CP shower kit consists of an angled brass wall outlet with integral handset holder (chrome plated), multi-layered PVC lined shower hose (silver external appearance) and a plastic bodied shower handset (chrome plated). Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211344

Size:

See model.

Marking:

Overhead showers: VADO logo on body. Shower handsets and shower kts: VADO logo on shower handset. Angled shower outlet: VADO logo on angled wall outlet.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

Overhead showers: ARR-HEAD/SA-CP - Arrondi Shower Head (Arrondi 250mm Round Shower Head + Shower Arm): ½” BSP (M), CER-HEAD-C/P - Ceres Shower Head (Self-Cleaning Shower Head 235mm (9") Diameter): ½” BSP (F). Shower handsets: ARR-HANDSET-CP - Arrondi Handset (Arrondi Single Function Handset): ½” BSP (M), CER-HANDSET/MF-DB-CP - Ceres Multifunction handset – ½” BSP (M). Shower kits: ARR-SFSRK+O-CP - Arrondi Shower Kit with Outlet (Arrondi Single Function Slide Rail Kit with Wall Outlet): ½” BSP (M), ARR-SFMKWO-CP - Arrondi Shower Kit (Arrondi Single Function Mini Kit with Integrated Outlet): ½” BSP (M). Angled shower outlet: ARR-OUTLET-CP – Arrondi Wall Outlet: ½” BSP (M).

Product Images

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Manufacturer:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Range of pillar taps (chromium plated brass) with a non-rising spindle headwork with dome type or cross top (see model) operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2206374

Size:

½" BSP (M)

Marking:

DTC 34 ON TAP BODY

Installation Requirements:

R001 R006

Expiry date:

30/06/2027

Model:

DCM103, DCM SPEC103, 208.0574.185, MILAN 103, MILAN SPEC103, 183X & 208.0574.189

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of PVC or EPDM lined shower hoses with stainless steel outer (chrome or black finish) or PVC reinforced (chrome plated finish) outer layer. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2210064

Note:

Open outlet use only

Size:

½” BSP captive nut.

Marking:

TRITON on captive nut.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

Stainless steel double locked hoses: 28100240: 1.0m Electrolytic Chrome. 28100210: 1.25m Electrolytic Chrome. 28100260: 1.75m Electrolytic Chrome. 28100270: 2.0m Electrolytic Chrome. 28100300: 1.5m Electrolytic Chrome. 28100380: 0.75m Electrolytic Chrome. 28100410: 1.5m Matt Black (Satin Black). 28100390: 0.75m Matt Black (Satin Black). 28100400: 1.0m Matt Black (Satin Black). H2006S* & H2023S* * denotes surface finish and can be replaced with: CE = Electrolytic Chrome or MB = Matt (Satin) Black. PVC reinforced hoses: 28100340: 1.5m Chrome Plated. 28100370: 1.0m Chrome Plated.

Approval Holder:

Triton Showers

Company Name

Triton Showers

Address

Triton Road, Nuneaton, Warwickshire

Postcode

CV11 4NR

Country

United Kingdom

Phone

02476 324423

General Email

paulrowley@tritonshowers.co.uk

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103343

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

JL-F1400120012487 & JL-140038003813

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of Direct & Indirect stainless steel insulated unvented hot water storage cylinders with internal expansion. The secondary circuit consists of a temperature and pressure relief valve set at 10.0 bar and 90°C and an alternative temperature and pressure relief valve also set at 10.0 bar and 90°C , an inlet control group consisting of a pressure reducing valve pre-set at 3.0 bar, an expansion relief valve set at 8.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum working pressure - Primary circuit: 6.0 bar & Secondary circuit: 7.5 bar Maximum operating temperature 85.0°C

Section:

1890 Unvented Heating Apparatus

Size:

22mm Compression on all circuits

Marking:

EVOCyle logo, max pressure, max temp, capacity and other technical information on label on body.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2027

Model:

TTAMVD-0150LFB ThermaQ Evocyl Air 150 Direct TTAMVD-0180LFC ThermaQ Evocyl Air 180 Direct TTAMVD-0210LFC ThermaQ Evocyl Air 210 Direct TTAMVD-0250LFC ThermaQ Evocyl Air 250 Direct TTAMVD-0300LFC ThermaQ Evocyl Air 300 Direct TTAMVI-0150LFB ThermaQ Evocyl Air 150 Indirect TTAMVI-0180LFC ThermaQ Evocyl Air 180 Indirect TTAMVI-0210LFC ThermaQ Evocyl Air 210 Indirect TTAMVI-0250LFC ThermaQ Evocyl Air 250 Indirect TTAMVI-0300LFC ThermaQ Evocyl Air 300 Indirect

Product Images

Approval Holder:

Joule Hot Water Systems UK Ltd

Company Name

Joule Hot Water Systems UK Ltd

Address

Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Manufacturer:

Joule Hot Water Systems UK Ltd

Company Name

Joule Hot Water Systems UK Ltd

Address

Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Range of wall mounted, manual, shower blending valves, comprising of a concealed brass body (rough in set) and a trim set (chrome plated), which includes a ceramic cartridge headwork with a single lever operating member. The 2551 and 2551EP trim set models also have a 90° wall outlet elbow. The 2541 and 2551 models are supplied with a combined plastic filter and plastic flow regulator (x2) for installation on each concealed body inlet. The 2541EP and 2551EP models are supplied with a combined plastic filter and an approved single check valve with a plastic flow regulator (x2), for installation on each concealed body inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The concealed rough in set incorporates a manually operated isolation valve on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

2211049

Note:

This approval does not include a shower hose and handset.

Size:

½” BSP (F) to concealed rough in set.

Marking:

Concealed bodies: Dealbie on product casing. Trim sets: Delabie on operating member and face plate.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2027

Model:

2541 + 254BOX, 2541EP + 254BOX, 2551 + 254CBOX, 2551EP + 254CBOX.

Product Images

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of wall mounted, concealed, thermostatic shower mixers with brass bodies, dome or cube operating members and a thermostatic cartridge controlling the temperature. Models D1001, LB091, LB092, LB093, LB094, LB095, D2002, LB096, LB097, LB098, LB099, LB100, D3001, LB101, LB102, LB103, LB104 & LB105 incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2210010

Size:

3/4" BSP (F) or ½” BSP (F)

Marking:

LEBAIN on face plate.

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2027

Model:

D1001 LB091 LB092 LB093 LB094 LB095 D2002 LB096 LB097 LB098 LB099 LB100 D3001 LB101 LB102 LB103 LB104 LB105 D1017 LB071 LB072 LB073 LB074 LB075 D2017 LB076 LB077 LB078 LB079 LB080 D3017 LB081 LB082 LB083 LB084 LB085

Approval Holder:

WEILAIWOLAI SANITARY WARE TECHNOLOGY(GUANGDONG)CO.,LTD

Company Name

WEILAIWOLAI SANITARY WARE TECHNOLOGY(GUANGDONG)CO.,LTD

Address

Feixiang Road, Dongxi Airport Industrial Area, Zhishan Town, Heshan

Phone

18207501630

General Email

lebain@lebain.cn

View All Listings by this Company

Range of wall mounted thermostatic blending valves with brass bodies (chrome plated), incorporating two way diverter valves controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2203377

Size:

½” BSP (M) x ¾” BSP (M) offset unions

Marking:

Deva & DTC 59 on tap body

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2027

Model:

X-GTSDEF, X-GTSDEFBK & X-RTSDEF

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Wall mounted shower mixer with brass body (chrome plated face plate), incorporating a ceramic cartridge headwork ,controlling the flow and temperature with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2211330

Size:

½” BSP (F)

Marking:

Grohe on operating member.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2027

Model:

29.080.001 Bauloop

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The valves are supplied with a variety of shower kits that consist of shower hoses, shower handsets and riser rail assemblies. Model is supplied with a flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2211909

Size:

3/4" BSP (F) or 15MM Compression

Marking:

Valves 269922BV & XMCTBV DTC 64 on rear body. Valve CTBV02BK Methven & DCT64 on body. Handsets Methven or Deva Hoses DTC 15, WRAS, Year of manufacture on conical nut.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2027

Model:

COMBMEF COMBMEF/HSR8 KESBS IHKESCTS KESCTS MCTS AOCTSCPUK AOCTSEFCP KCTS KCTSMH KHCTSEFCP KLFCTS KLFCTSEFCP KRCTSEFCP KRLFCTSEFLP KRCTSEFBK VISBS MCTS MH WISBS

Product Images

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The valve can be supplied with a variation of shower kits that can consist of the following components: handsets, overhead showers, shower hoses, wall outlets, fixed arms, and isolation valves. Maximum working pressure 7 bar. Maximum working temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2211904

Size:

15mm spigot

Marking:

Valve Aqualisa and product information on adhesive label. Overhead showers Aqualisa on face or inlet connection Shower handsets Aqualisa on handle. Wall outlets Aqualisa on body. Fixed Arm Aqualisa on cover plate. Hoses Aqualisa on conical nuts. Isolation valves DM logo, size, and flow arrow on body

Installation Requirements:

R001 R008 R010 R040

Expiry date:

30/11/2027

Model:

794JK 828JK ISD.A1.BFC.21 ISD.A1.BFW.21 ISD.A1.BFW.21SU ISD.A1.BV.21 ISD.A1 BV. 21SU ISD.A1.EV.21 ISD.A1.EV.21SU OPQ.A1.BR.20 OPQ.A1.BV.20 QZD.A1.BR.20 QZD.A1.BV.20 QZSB.A1.BR.20 QZSB.A1.BV.20 QZSB.A1.BV.DVFC.INT.20 QZSB.A1.BV.DVFW.20 QZSB.A1.BV.DVFW.INT.20 QZSB.A1.BV.INT.20 QZST.A1.BR.20 QZST.A1.BV.20 QZST.A1.BV.INT.20 UTQ.A1.BR.20 UTQ.A1.BV.20 VSQ.A1.BR.20 VSQ.A1.BV.20 VSQ.A1.BV.DVFW.20

Product Images

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of butterfly valves incorporating blue epoxy coated ductile iron bodies and discs. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2207387

Size:

DN150, 200, 300 & 400.

Marking:

CTV, DN & PN on body. CTV, DN & PN on METAL DATA PLATE PON BODY

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

CTV TYP 09 (Z)

Approval Holder:

CTV Armaturen & Penstocks GmBH

Company Name

CTV Armaturen & Penstocks GmBH

Address

Pliniusstrasse 6, 48488 Emsbueren

Country

Germany

General Email

gerhard.jj@ctv-valves.com

View All Listings by this Company

Piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:

2120 Valves

Section Subtitle:

Float operated, piston type, metal body.

WRAS Approval Number:

2207388

Note:

For use with floats complying with BS 2456, not supplied. All models, except 20.10102.G15.CP5R-8510, 20.10192.G15.CP5R-8510, 20.10112.G15.CP5R-8510, 20.10182.G20.CP5R-8510 are marked with BS1212/1.

Size:

½”, ¾” or 1” BSP(M)

Marking:

WESTCO, WRAS, date of manufacture MM/YY on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

UW22010 1/2" PT1 Float Ball Valve LP 8 bar

Approval Holder:

STH Westco Limited

Company Name

STH Westco Limited

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

General Email

john.gartshore@westco.co.uk

View All Listings by this Company

Manually operated thermally actuated regulating valves with bronze bodies and EPDM O-rings. Flow is controlled by a rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

2209063

Size:

1/2" BSP (F) X 1/2" BSP (F) - Crane D2890 DN 15 3/4" BSP (F) X 3/4" BSP (F) - Crane D2880 DN 20 ½” BSP (F) x ½” BSP (F) – Crane D2880 DN15

Marking:

HNH, model & temperature settings on caps. DN, PN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

HATTERSLEY FIG 2910 DN15 Low flow. HATTERSLEY FIG 2900 DN15 Standard flow. HATTERSLEY FIG 2900 DN20 Standard flow.

Product Images

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of spring-loaded resilient trim, non-return valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

2301707

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300.

Marking:

BOSS & technical information on data plate on body. DN & Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

23210209, 23210220, 23210231, 23210242, 23210253, 23210264, 23210275, 3210286 & 23210297 BOSS 10XS DUAL PLATE NON RETURN VALVES

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of pressure reducing valves with DZR brass, gunmetal or stainless-steel bodies. Maximum inlet pressure for HP and SP Models = 25.0 bar. Maximum inlet pressure for LP Models = 6.0 bar. Maximum operating temperature 60°C

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2209066

Note:

IRN R008 applies only to model with the clear cap.

Size:

½” BSP M to 2” BSP M inlet/outlet

Marking:

BWT ON OPERATING MEMBER FLOW ARROW ON BODY

Installation Requirements:

R001 R008

Expiry date:

30/09/2027

Model:

BWT RED GUNMETAL BWT INOX STAINLESS STEEL BWT ECO DZR BRASS YY: outlet pressure range; LP (0.5-3 bar), SP (1.5-7 bar), or HP (3-12 bar) XX: Size (DN); 15, 20, 25, 32, 40, or 50 – (9060 DZR-brass only available in 15, 20, 25) ZZ: Pressure/Temperature; 16 (16 bar max inlet pressure, for cold water only), 25 (25 bar max inlet pressure, for warm water at 60°C) in case of YY=LP the maximum inlet pressure is limited to max 6 bar

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Pressure relief valve with a brass body and EPDM diaphragm, pre-set at 3.0 bar. Maximum operating temperature 90°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

2210321

Note:

Closed circuit use only.

Size:

See model

Marking:

Vaillant logo, flow arrow, DN15 and CE mark stamped on valve body.

Installation Requirements:

R001 R200

Expiry date:

31/10/2027

Model:

190752: ½” quick connector. 190753: ½” BSP (M).

Approval Holder:

Vaillant GmbH

Company Name

Vaillant GmbH

Address

Berghauser Strasse, 40 D-42859 Remscheid

Country

Germany

Phone

Tel: +49 2191 182126

View All Listings by this Company

Range of spherical valves with brass (K65281, K65282, K65283, K65301, K65302, K65303, K65291, K65292, K65293, K65311, K65312 & K65313) or DZR brass (K64783, K64784, K64793, K64794, K64763, K64764, K64773, K64774) bodies (chrome plated, nickel plated or without plating - see model), chrome plated brass ball and a range of different operating members (see model). Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2207380

Size:

See model.

Marking:

JET RANGE, DN, PN, CN, & CR ON BODY.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

K64783, K64784, K64763 and K64764 with or without chrome plating - lever operated DN8: 10mm compression x 10mm compression, DN8: 12mm compression x 10mm compression, DN8: 12mm compression x 12mm compression, DN10: 15mm compression x 12mm compression, DN10: 15mm compression x 15mm compression, DN15R: 22mm compression x 22mm compression. K64793, K64794, K64773 and K64774 with or without chrome plating - lever operated DN8: 10mm compression x 10mm compression, DN8: 12mm compression x 10mm compression, DN8: 12mm compression x 12mm compression, DN10: 15mm compression x 12mm compression, DN10: 15mm compression x 15mm compression, DN15R: 22mm compression x 22mm compression. K65301, K65302 and K65303 with or without chrome plating - butterfly handle DN8: ¼" BSP (F) x ¼" BSP (F), DN8: ⅜" BSP (F) x ⅜" BSP (F), DN10: ½" BSP (F) x ½" BSP (F). K65281, K65282 and K65283 with or without chrome plating - lever operated): DN8: ¼" BSP (F) x ¼" BSP (F), DN8: ⅜" BSP (F) x ⅜" BSP (F), DN10: ½" BSP (F) x ½" BSP (F). K65311, K65312 and K65313 with or without chrome plating - butterfly handle DN8: ¼" BSP (M) x ¼" BSP (F), DN8: ⅜" BSP (M) x ⅜" BSP (F), DN10: ½" BSP (M) x ½" BSP (F). K65291, K65292 and K65293 with or without chrome plating - lever operated DN8: ¼" BSP (M) x ¼" BSP (F), DN8: ⅜" BSP (M) x ⅜" BSP (F), DN10: ½" BSP (M) x ½" BSP (F).

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of spherical valves with various operating members, brass bodies, brass balls, FKM ‘O’-rings or EPDM ‘O’-rings (S84W series only) and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2210353

Size:

See models.

Marking:

Rub logo, size, DN, PN, casting date (YYWW) and serial number on body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

SERIES S84: S84xyyz. Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF , long lever, 06 = BSPP FxF, T-handle, 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever, 26 = BSPP MxF, T-handle, 25 = BSPP MxF, lockable handle (light-blue), T0 = BSPP FxF, stubby (short) lever, 08 = BSPT FxF, long lever (no markings on the lever), 50 = BSPT FxF, long lever, 56 = BSPT FxF, T-handle, 59 = BSPT FxF, lockable handle (light-blue), 52 = BSPT MxF, long lever, 57 = BSPT MxF, T-handle, 55 = BSPT MxF, lockable handle (light-blue). z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, KA = customised laser marking on red handle, L = customised laser marking on blue handle, R = red handle colour. SERIES S84W: S84xyyWz. Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF , long lever (green), 06 = BSPP FxF, T-handle (green), 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever (green), 26 = BSPP MxF, T-handle (green), 25 = BSPP MxF, lockable handle (light-blue), z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, M = return spring lever, R = red handle colour, UP = customised laser marking on handle. SERIES S90: S90xyyz Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF, long lever (red), 16 = BSPP FxF, T-handle (red), 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever (red), 26 = BSPP MxF, T-handle (red), 25 = BSPP MxF, lockable handle (light-blue), 22 = BSPP MxM, long lever (red), 27 = BSPP MxM, T-handle (red), 29 = BSPP MxM, lockable handle (light-blue). z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, L = customised laser marking on handle, P = customised laser marking on handle. SERIES S64: S64xyy(y)(y) Where: x = size: D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy(y)(y) = thread type, unplated and low torque: 00 = BSPP FxF thread with brass trim (stem & ball), 00G = same as 00, but body and end-cap are in brass unplated (instead of nickel plated), 05 = BSPP FxF thread with brass trim (stem & ball), 00A = BSPP FxF thread with brass trim (stem & ball), low torque (sizes 1” through 2” only), 00AG = same as 00A, but body and end-cap are in brass unplated (instead of nickel plated).

Approval Holder:

BONOMI Industries srl

Company Name

BONOMI Industries srl

Address

Via Padana Superiore, 29 Mazzano (BS)

Postcode

25080

Country

Italy

Phone

+39 030 21 244 241

General Email

info@rubvalves.com

View All Listings by this Company

Manufacturer:

BONOMI Industries srl

Company Name

BONOMI Industries srl

Address

Via Padana Superiore, 29 Mazzano (BS)

Postcode

25080

Country

Italy

Phone

+39 030 21 244 241

General Email

info@rubvalves.com

View All Listings by this Company

Range of lever operated spherical valves with nickel plated brass bodies incorporating chromium plated brass balls. For use with copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2210805

Size:

14.7mm – 27.4mm Irish compression end connections.

Marking:

PC and size on body. Plumb Centre on operating member

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

93520 (14.7mm). 93521 (21mm). 93522 (27.4mm).

Approval Holder:

Grafton Merchanting ROI

Company Name

Grafton Merchanting ROI

Address

Ashfield Naas Road Dublin 22

Country

Ireland

View All Listings by this Company

Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2204095

Size:

SEE MODELS

Marking:

TPK, size, date of manufacture (MM/YY) on body. TPK, ON/OFF and size on lever.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Red handle circlip reduced bore ball valve models: 909978 15MM 909990 22MM Red handle circlip full bore ball valve models: 111355 15MM 111380 22MM Blue handle circlip full bore ball valve models: 111406 15MM 111430 22MM

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of full bore spherical valves with single lever, lockable lever or butterfly operating members, nickel plate brass bodies and chrome plated, brass ball, PTFE seats and NBR O-rings.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2211300

Size:

see model

Marking:

Body: IVR logo, size, PN, batch No. & Made in Italy. Operating members: IVR, Everlast, ACS & WRAS

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

IVR EVERLAST SERIES: IVR 954 ‐ BSP F/F, with red single lever operating members. 195402007 1/4" 195403007 3/8" 195405007 1/2" 195407007 3/4" 195410007 1" 195412007 1"1/4 195415007 1"1/2 195420007 2" 195425007 2"1/2 195430007 3" 195440007 4" IVR 954/A ‐ BSP F/F, with red butterfly operating members. 195402008 1/4" 195403008 3/8" 195405008 1/2" 195407008 3/4" 195410008 1" 195412008 1"1/4 IVR 954 LD ‐ BSP F/F ‐ with red or blue lockable single lever operating members. 195402750 1/4" 195403750 3/8" 195405750 1/2" 195407750 3/4" 195410750 1" 195412750 1"1/4 195415750 1"1/2 195420750 2" IVR 956 ‐ BSP M/F, with red single lever operating members. 195602007 1/4" 195603007 3/8" 195605007 1/2" 195607007 3/4" 195610007 1" 195612007 1"1/4 195615007 1"1/2 195620007 2" IVR 956/A ‐ BSP M/F, with red butterfly operating members. 195602008 1/4" 195603008 3/8" 195605008 1/2" 195607008 3/4" 195610008 1" 195612008 1"1/4 IVR 956 LD ‐ BSP M/F ‐ with red or blue lockable operating members. 195605750 1/2" 195607750 3/4" 195610750 1" 195612750 1"1/4 195615750 1"1/2 195620750 2" IVR 957 ‐ BSP M/M, with red single lever operating members. 195702007 1/4" 195703007 3/8" 195705007 1/2" 195707007 3/4" 195710007 1" 195712007 1"1/4 195715007 1"1/2 195720007 2" IVR 957/A ‐ BSP M/M, with red butterfly operating members. 195702008 1/4" 195703008 3/8" 195705008 1/2" 195707008 3/4" 195710008 1" IVR EVERLAST PLUS SERIES: IVR 954 PLUS ‐ BSP F/F, with single lever operating members. 195402024 1/4" 195403024 3/8" 195405024 1/2" 195407024 3/4" 195410024 1" 195412024 1"1/4 195415024 1"1/2 195420024 2" IVR 956 PLUS ‐ BSP M/F, with single lever operating members. 195602334 1/4" 195603334 3/8" 195605334 1/2" 195607334 3/4" 195610334 1" 195612334 1"1/4 195615334 1"1/2 195620334 2" IVR 957 PLUS ‐ BSP M/M, with single lever operating members. 195702334 1/4" 195703334 3/8" 195705334 1/2" 195707334 3/4" 195710334 1" 195712334 1"1/4 195715334 1"1/2 195720334 2"

Product Images

Approval Holder:

IVR SpA

Company Name

IVR SpA

Address

Via Brughiera III No 1, 28010 Loc. Piano Rosa, Boca (NO)

Country

Italy

View All Listings by this Company

Manufacturer:

IVR SpA

Company Name

IVR SpA

Address

Via Brughiera III No 1, 28010 Loc. Piano Rosa, Boca (NO)

Country

Italy

View All Listings by this Company

Range of gate valves with a non-rising spindle and a handwheel operating member. The 960985, 960986 & 960987 suffix models have a brass body and brass wedge, the 850066, 850070 & 850071 suffix models have a DZR brass body and a brass wedge. For use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2207383

Size:

see model

Marking:

CPS, size, BS5154 on body. 850066, 850070 & 850071 models are also marked with CR on the body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

960985 15mm compression, 960986 22mm compression, 960987 28mm compression, 850066 15mm compression, 850070 22mm compression, 850071 28mm compression.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of gate valves with brass bodies, brass wedges and PTFE seals. The valves are operated via a non-rising spindle with a hand wheel operating member. To be used with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2107155

Size:

See model

Marking:

Plumb Centre and size on compression nut.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

81980: ½” compression. 81981: ¾” compression. 81982: 1” compression.

Approval Holder:

Grafton Merchanting ROI

Company Name

Grafton Merchanting ROI

Address

Ashfield Naas Road Dublin 22

Country

Ireland

View All Listings by this Company

Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2210364

Size:

15, 20, 22, & 28 mm compression

Marking:

TS, date of manufacture (MM/YY), EN1213, size and flow arrow stamped on body; for DZR body models, with CR mark on body

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

75472 15MM BRASS STOPCOCK CXC 32571 22MM BRASS STOPCOCK CXC 69119 15MM BRASS STOPCOCK CXC DZR 22957 22MM BRASS STOPCOCK CXC DZR 76247 20MM X 20MM BRASS STOPCOCK CXC

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2210365

Size:

15, 20, 22, & 28 mm compression

Marking:

PFP, date of manufacture (MM/YY), EN1213, size and flow arrow stamped on body; for DZR body models, with CR mark on body

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

10145105 15MM BRASS STOPCOCK CXC 10145118 22MM BRASS STOPCOCK CXC 10145131 28MM BRASS STOPCOCK CXC 10145196 15MM BRASS STOPCOCK CXC DZR 10145209 22MM BRASS STOPCOCK CXC DZR 10145482 15MM X 20MM BRASS STOPCOCK CXC 10145521 20MM X 20MM BRASS STOPCOCK CXC

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

Range of screw down valves with brass bodies, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2210366

Size:

15, 22, & 28 mm compression

Marking:

TPK, date of manufacture (MM/YY), EN1213, size and flow arrow stamped on body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

960990 15MM BRASS STOPCOCK CXC 960991 22MM BRASS STOPCOCK CXC 861924 28MM BRASS STOPCOCK CXC

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2210367

Size:

15, 20, 22, & 28 mm compression

Marking:

CPS, date of manufacture (MM/YY), EN1213, size and flow arrow stamped on body; for DZR body models, with CR mark on body

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

960990 15MM BRASS STOPCOCK CXC 960991 22MM BRASS STOPCOCK CXC 861924 28MM BRASS STOPCOCK CXC 850064 15MM BRASS STOPCOCK CXC DZR 850065 22MM BRASS STOPCOCK CXC DZR 662470 28MM BRASS STOPCOCK CXC DZR 960994 15MM X 20MM BRASS STOPCOCK CXC 503707 20MM X 20MM BRASS STOPCOCK CXC

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of commercial, front loading washing machines with flow controlled by a solenoid valve and discharged via type AB air gap assembly (verified by test, suitable for backflow protection against fluid category 5). The inlets incorporate a stainless-steel strainer. Maximum working pressure 6 Bar Maximum operating temperature 85°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2210061

Size:

Hot inlet - EPDM lined flexible hose assembly with 3/4" BSP captive nut end connections Cold inlet - PVC lined flexible hose assembly with 3/4" BSP captive nut end connections.

Marking:

Girbau on control panel, Girbau, model, operating info on label on rear panel.

Installation Requirements:

R001 R160

Expiry date:

31/10/2027

Model:

HS7009/23 E, HS70009/23 H HS7013/30 E, HS7013/30 H, HS7013/30 V HS7018/45 E, HS7018/45 H, HS7018/45 V HS7024/60 E, HS7024/60 H, HS7024/60 V HS7028/70 E, HS7028/70 H, HS7028/70 V HS7032/80 E, HS7032/80 H, HS7032/80 V

Approval Holder:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, Vic

Postcode

08500

Country

Spain

Phone

+34659242864

General Email

jsana@girbau.com

View All Listings by this Company

Manufacturer:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, Vic

Postcode

08500

Country

Spain

Phone

+34659242864

General Email

jsana@girbau.com

View All Listings by this Company

'DWKRAL ABS BIANCO 4698 AT'. White coloured, injection moulded ABS material. For use with water up to 35°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

31/10/2027

Approval Holder:

Soredi Spa

Company Name

Soredi Spa

Address

Via Isola D'Elba 20, 25033 Cologne

Country

Italy

View All Listings by this Company