Dornbracht AG & Co. KG Approvals


#2003006

Floor mounted single hole, single outlet (fixed) combination tap assembly incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet incorporates a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Product is supplied with a shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0465 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Rough kit, part number 3594597090 is not part of this approval.
Size:
38mm OD to fit into rough kit, part number 3594597090
Marking:
Dornbracht on front of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2025
Model:
25863710

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2003025

Wall mounted single hole, single outlet (fixed) combination tap assembly (chrome plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The external part is supplied with a concealed rough part for connection to water supplies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Size:
½” BSP (F)
Marking:
Dornbracht on face plate
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2025
Model:
3500397090 concealed part for use with 36804661 external part.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2003051

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Model 33501662 is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
No testing performed on pop-up waste
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” BSP captive nut end connections.
Marking:
DORN BRACHT on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2025
Model:
33501662 single lever basin mixer with pop-up waste, 33526662 single lever basin mixer without pop-up waste, 33537662 single-lever basin mixer with raised base without pop-up waste & 33539662 single-lever basin mixer with raised base without pop-up waste.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2003056

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0400 Combination Tap Assemblies - Bidet
Description:
Single hole bidet tap with a single outlet fixed spout with swivel nozzle.
Size:
Stainless steel braided PEX lined flexible hose with ⅜” BSP captive nut end connections.
Marking:
DornBracht on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2025
Model:
33600660

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2003058

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 33501660 & 33502660 models are supplied with a pop-up waste. All models are supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Size:
Stainless steel braided PEX lined flexible hose assemblies with ⅜” BSP captive nut connection end connections.
Marking:
Dornbracht on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2025
Model:
33501660, 33502660, 33522660, 33525660, 33526660, 33537660, 33539660. Models added August 2022 33504660, 33505660, 33529660. 33530660.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2004015

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and dome operating members. The spout outlets incorporate a plastic aerator. Model 33525664 is supplied with a metal C clamp & all other models are supplied with a metal backnut. Some models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
No testing performed on pop-up waste.
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Dornbracht on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
33501664, 33525664, 33526664, 33537664 & 33539664

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2004019

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic disc headwork with dome type operating member. The spout outlets incorporate a plastic aerator. Model 33500665 is supplied with a pop-up waste. Maximum working pressure 10.0 bar Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
No testing performed on pop-up waste.
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections.
Marking:
Dornbracht on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2025
Model:
33500665, 33505665, 33510665, 33525665 & 33534665

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2004028

Range of flow control valves with brass bodies (chromium plated) comprising of a ceramic cartridge headwork with a variety of operating members and stainless-steel braided supply hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 80ºC.

Section:
2170 Valves
Description:
Flow control, manually operated.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating a ⅜” captive nut end connection to a ⅜” (M) BSP x ½” (F) BSP adaptor.
Marking:
Dornbracht on body.
Installation Requirements:
R001 R009 R010 R040
Expiry date:
30/04/2025
Model:
29300660, 29300670, 29300710, 29300809 & 29300845

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2005002

Range of wall mounted spout outlets (chromium plated brass) incorporating a plastic flow regulator at the inlet. Model 13800670 incorporates a plastic aerator at the outlet. Maximum operating temperature 60°C.

Section:
0682 Combination Tap Assemblies
Description:
Spout outlets.
Open outlet use only
Size:
½” BSP (M)
Marking:
DORNBRACHT on cover plate
Installation Requirements:
R001 R040
Expiry date:
31/05/2025
Model:
13800670 & 13801670

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2005003

Range of, wall mounted shower outlets (chromium plated brass). Inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Description:
Shower heads and shower handsets
Open outlet use only.
Size:
½” BSP (M)
Marking:
DORNBRACHT on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2025
Model:
36512979 & 36513979 SPOUT OUTLET

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 17

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.