Henco range of nickel plated brass fittings and press fit (Brass and PVDF) fittings, incorporating EPDM rubber ‘O’-rings, all for use with Henco RIXC Multilayer pipe (PE–xc/AL/PE-xc) only. Crimping for press fit models is achieved via specialised crimping tool. For above ground use only. Maximum working pressure 10.0bar. Maximum operating temperature 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1707374
• Expiry date: 31/07/2022
• Note: R009 applies to the PVDF fittings only.
• Marking: Fittings Henco Press PVDF fitting (PKW) + Press Brass (P): Henco and size on crimped connector. Henco, size, PKW and date of manufacture (clock format) on body. Henco Schroef (EK) fittings: HN (Stands for Henco) cast on nut. Pipe: Henco, PEXc/AL/PEXc, size, class, made in Belgium and other technical information printed on body.
• Installation Requirements R001 R09
• Model
  Henco Press PVDF fitting (PKW): 16, 20, 26 & 32mm. Henco brass press fitting (P): 16, 20 & 26mm Henco Schroef fitting (EK):12mm compression. Henco RIXC Multilayer pipe PEXc/AL/PEXc: 12, 16, 20, 26 & 32mm.
• Manufacturer: Henco Industries NV
  Company Name

  Henco Industries NV
  View All Listings by this Company

Mingshi range of U and TH press fittings for use with Mingshi PEX-Al-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1707011
• Expiry date: 31/07/2022
• Size: 16~32mm
• Marking: Model, size & date of manufacture on pipe. U- model & size on body TH- Model & size on body
• Installation Requirements R001
• Model
  MINGSHI MSP PEX-AL-PEX PIPE MINGSHI U PRESS FITTING MINGSHI TH PRESS FITTING
• Factor: Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.
  Company Name

  Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.
  View All Listings by this Company

‘Multitubo’ range of MM and MC press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Multitubo multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1712055
• Expiry date: 31/12/2022
• Size: 16mm - 32mm
• Marking: Multitubo & technical information on the fittings. Multitubo & size on the pipe.
• Installation Requirements R001
• Model
  Multitubo Multilayer Pipe - PE-RT/AL/PE-RT (white) - 16mm x 2mm (WT): 200137 - 5m, 201549 - 5m, 201509 - 25m, 201711 - 100m, 200138 - 100m, 200140 - 200m, 201025 - 240m & 200141 - 500m. 20mm x 2mm (WT): 200706 - 5m, 200703 - 100m & 201947 - 100m. 20mm x 2.25mm (WT): 200148 - 5m, 201550 - 5m, 201712 - 100m, 200149 - 100m & 200150 - Restring. 25mm x 2.5mm (WT): 200151 - 5m, 201551 - 5m, 201713 - 50m & 200152 - 50m. 32mm x 3mm (WT): 200154 - 5m, 200155 - 25m, 200156 - 50m & 201314 - 101m. Fittings (1st code is type MC, 2nd code is type MM) - PPSU Press-Elbow 90° : 53010 - P703.1616 – 16mm x 16mm, 53030 - P703.2020 – 20mm x 20mm, 53040 - P703.2525 – 25mm x 25mm & 53050 - P703.3232 – 32mm x 32mm. PPSU Press-Tee: 55010 - P723.161616 - 16mm x 16mm x 16mm, 55011 - P723.162016 - 16mm x 20mm x 16mm, 55030 - P723.202020 - 20mm x 20mm x 20mm, 55031 - P723.201616 - 20mm x 16mm x 16mm, 55032 - P723.201620 - 20mm x 16mm x 20mm, 55033 - P723.202016 - 20mm x 20mm x 16mm, 55040 - P723.252525 - 25mm x 25mm x 25mm, 55041 - P723.251625 - 25mm x 16mm x 25mm, 55042 - P723.252020 - 25mm x 20mm x 20mm, 55043 - P723.252025 - 25mm x 20mm x 25mm, 55050 - P723.323232 - 32mm x 32mm x 32mm, 55051 - P723.322032 - 32mm x 20mm x 32mm, 55052 - P723.322532 - 32mm x 25mm x 32mm & 55053 - P723.322525 - 32mm x 25mm x 25mm. PPSU Press-Coupling: 57010 - P733.1616 - 16mm x 16mm, 57030 - P733.2020 - 20mm x 20mm, 57031 - P733.2016 - 20mm x 16mm, 57040 - P733.2525 - 25mm x 25mm, 57041 - P733.2516 - 25mm x 16mm, 57042 - P733.2520 - 25mm x 20mm, 57050 - P733.3232 - 32mm x 32mm & 57052 - P733.3225 - 32mm x 25mm.
• Factor: Multicapas Industrial SL
  Company Name

  Multicapas Industrial SL
  View All Listings by this Company

‘Multitubo’ range of press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Multitubo multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1712092
• Expiry date: 31/12/2022
• Size: 16mm - 32mm
• Marking: Multitubo on the fittings. Multitubo & technical information on the pipe.
• Installation Requirements R001
• Model
  Multitubo Multilayer Pipe - PE-RT/AL/PE-RT (white) - 16mm x 2mm (WT): 200137 - 5m, 201549 - 5m, 201509 - 25m, 201711 - 100m, 200138 - 100m, 200140 - 200m, 201025 - 240m & 200141 - 500m. 20mm x 2mm (WT): 200706 - 5m, 200703 - 100m & 201947 - 100m. 20mm x 2.25mm (WT): 200148 - 5m, 201550 - 5m, 201712 - 100m, 200149 - 100m & 200150 - Restring. 25mm x 2.5mm (WT): 200151 - 5m, 201551 - 5m, 201713 - 50m & 200152 - 50m. 32mm x 3mm (WT): 200154 - 5m, 200155 - 25m, 200156 - 50m & 201314 - 101m. Fittings (1st code is type MC, 2nd code is type MM) - PPSU Press-Elbow 90° : 53010 - P703.1616 – 16mm x 16mm, 53030 - P703.2020 – 20mm x 20mm, 53040 - P703.2525 – 25mm x 25mm & 53050 - P703.3232 – 32mm x 32mm. PPSU Press-Tee: 55010 - P723.161616 - 16mm x 16mm x 16mm, 55011 - P723.162016 - 16mm x 20mm x 16mm, 55030 - P723.202020 - 20mm x 20mm x 20mm, 55031 - P723.201616 - 20mm x 16mm x 16mm, 55032 - P723.201620 - 20mm x 16mm x 20mm, 55033 - P723.202016 - 20mm x 20mm x 16mm, 55040 - P723.252525 - 25mm x 25mm x 25mm, 55041 - P723.251625 - 25mm x 16mm x 25mm, 55042 - P723.252020 - 25mm x 20mm x 20mm, 55043 - P723.252025 - 25mm x 20mm x 25mm, 55050 - P723.323232 - 32mm x 32mm x 32mm, 55051 - P723.322032 - 32mm x 20mm x 32mm, 55052 - P723.322532 - 32mm x 25mm x 32mm & 55053 - P723.322525 - 32mm x 25mm x 25mm. PPSU Press-Coupling: 57010 - P733.1616 - 16mm x 16mm, 57030 - P733.2020 - 20mm x 20mm, 57031 - P733.2016 - 20mm x 16mm, 57040 - P733.2525 - 25mm x 25mm, 57041 - P733.2516 - 25mm x 16mm, 57042 - P733.2520 - 25mm x 20mm, 57050 - P733.3232 - 32mm x 32mm & 57052 - P733.3225 - 32mm x 25mm.
• Factor: DW Verbundrohr GmbH
  Company Name

  DW Verbundrohr GmbH
  View All Listings by this Company

‘BFB’ range of press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Firmopress PPSU multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1712097
• Expiry date: 31/12/2022
• Size: 16mm - 32mm
• Marking: Firmopress & technical information on the fittings. Firmopress & size on the pipe.
• Installation Requirements R001
• Model
  PPSU Press-Elbow 90° : BFB53010 – 16mm x 16mm, BFB53030 – 20mm x 20mm, BFB53040 – 25mm x 25mm & BFB53050 – 32mm x 32mm. PPSU Press-Tee: BFB55010 - 16mm x 16mm x 16mm, BFB55011- 16mm x 20mm x 16mm, BFB55030 - 20mm x 20mm x 20mm, BFB55031 - 20mm x 16mm x 16mm, BFB55032 - 20mm x 16mm x 20mm, BFB55033 - 20mm x 20mm x 16mm, BFB55040 - 25mm x 25mm x 25mm, BFB55041 - 25mm x 16mm x 25mm, BFB55042 - 25mm x 20mm x 20mm, BFB55043 - 25mm x 20mm x 25mm, BFB55050- 32mm x 32mm x 32mm, BFB55051 - 32mm x 20mm x 32mm, BFB55052 - 32mm x 25mm x 32mm & PPSU Press-Coupling: BFB57010 - 16mm x 16mm, BFB57030 - 20mm x 20mm, BFB57031 - 20mm x 16mm, BFB57040 - 25mm x 25mm, BFB57041 - 25mm x 16mm, BFB57042 - 25mm x 20mm, BFB57050 - 32mm x 32mm & BFB57052 - 32mm x 25mm. for use with Firmopress PPSU multi-layer pipes. (MADE OF PE-RT/AL/PE-RT)
• Factor: Firmopress Ltd.
  Company Name

  Firmopress Ltd.
  View All Listings by this Company

AIS range of MM and MC press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Multitubo multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1712091
• Expiry date: 31/12/2022
• Size: 16mm - 32mm
• Marking: AIS & technical information on the fittings. AIS, size & technical information (including WRAS Approved for 10.0 bar@70°C) on the pipe.
• Installation Requirements R001
• Model
  AIS Multilayer Pipe - PE-RT/AL/PE-RT (white) - 16mm x 2mm (WT): 200137 - 5m, 201549 - 5m, 201509 - 25m, 201711 - 100m, 200138 - 100m, 200140 - 200m, 201025 - 240m & 200141 - 500m. 20mm x 2mm (WT): 200706 - 5m, 200703 - 100m & 201947 - 100m. 20mm x 2.25mm (WT): 200148 - 5m, 201550 - 5m, 201712 - 100m, 200149 - 100m & 200150 - Restring. 25mm x 2.5mm (WT): 200151 - 5m, 201551 - 5m, 201713 - 50m & 200152 - 50m. 32mm x 3mm (WT): 200154 - 5m, 200155 - 25m, 200156 - 50m & 201314 - 101m. Fittings (1st code is type MC, 2nd code is type MM) - PPSU Press-Elbow 90° : 53010 - P703.1616 – 16mm x 16mm, 53030 - P703.2020 – 20mm x 20mm, 53040 - P703.2525 – 25mm x 25mm & 53050 - P703.3232 – 32mm x 32mm. PPSU Press-Tee: 55010 - P723.161616 - 16mm x 16mm x 16mm, 55011 - P723.162016 - 16mm x 20mm x 16mm, 55030 - P723.202020 - 20mm x 20mm x 20mm, 55031 - P723.201616 - 20mm x 16mm x 16mm, 55032 - P723.201620 - 20mm x 16mm x 20mm, 55033 - P723.202016 - 20mm x 20mm x 16mm, 55040 - P723.252525 - 25mm x 25mm x 25mm, 55041 - P723.251625 - 25mm x 16mm x 25mm, 55042 - P723.252020 - 25mm x 20mm x 20mm, 55043 - P723.252025 - 25mm x 20mm x 25mm, 55050 - P723.323232 - 32mm x 32mm x 32mm, 55051 - P723.322032 - 32mm x 20mm x 32mm, 55052 - P723.322532 - 32mm x 25mm x 32mm & 55053 - P723.322525 - 32mm x 25mm x 25mm. PPSU Press-Coupling: 57010 - P733.1616 - 16mm x 16mm, 57030 - P733.2020 - 20mm x 20mm, 57031 - P733.2016 - 20mm x 16mm, 57040 - P733.2525 - 25mm x 25mm, 57041 - P733.2516 - 25mm x 16mm, 57042 - P733.2520 - 25mm x 20mm, 57050 - P733.3232 - 32mm x 32mm & 57052 - P733.3225 - 32mm x 25mm.
• Factor: Multicapas Industrial SL
  Company Name

  Multicapas Industrial SL
  View All Listings by this Company

‘Kelox’ range of MM and MC press fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Kelox multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1712107
• Expiry date: 31/12/2022
• Size: 16mm - 32mm
• Marking: KELOX, WRAS & TECHNICAL INFORMATION ON PIPE. KE, SIZE, PPSU & TECHNICAL INFORMATION ON FITTINGS.
• Installation Requirements R001
• Model
  Kelox Multilayer Pipe - PE-RT/AL/PE-RT (white) - 16mm x 2mm (WT): 200137 - 5m, 201549 - 5m, 201509 - 25m, 201711 - 100m, 200138 - 100m, 200140 - 200m, 201025 - 240m & 200141 - 500m. 20mm x 2mm (WT): 200706 - 5m, 200703 - 100m & 201947 - 100m. 20mm x 2.25mm (WT): 200148 - 5m, 201550 - 5m, 201712 - 100m, 200149 - 100m & 200150 - Restring. 25mm x 2.5mm (WT): 200151 - 5m, 201551 - 5m, 201713 - 50m & 200152 - 50m. 32mm x 3mm (WT): 200154 - 5m, 200155 - 25m, 200156 - 50m & 201314 - 101m. Fittings (1st code is type MC, 2nd code is type MM) - PPSU Press-Elbow 90° : 53010 - P703.1616 – 16mm x 16mm, 53030 - P703.2020 – 20mm x 20mm, 53040 - P703.2525 – 25mm x 25mm & 53050 - P703.3232 – 32mm x 32mm. PPSU Press-Tee: 55010 - P723.161616 - 16mm x 16mm x 16mm, 55011 - P723.162016 - 16mm x 20mm x 16mm, 55030 - P723.202020 - 20mm x 20mm x 20mm, 55031 - P723.201616 - 20mm x 16mm x 16mm, 55032 - P723.201620 - 20mm x 16mm x 20mm, 55033 - P723.202016 - 20mm x 20mm x 16mm, 55040 - P723.252525 - 25mm x 25mm x 25mm, 55041 - P723.251625 - 25mm x 16mm x 25mm, 55042 - P723.252020 - 25mm x 20mm x 20mm, 55043 - P723.252025 - 25mm x 20mm x 25mm, 55050 - P723.323232 - 32mm x 32mm x 32mm, 55051 - P723.322032 - 32mm x 20mm x 32mm, 55052 - P723.322532 - 32mm x 25mm x 32mm & 55053 - P723.322525 - 32mm x 25mm x 25mm. PPSU Press-Coupling: 57010 - P733.1616 - 16mm x 16mm, 57030 - P733.2020 - 20mm x 20mm, 57031 - P733.2016 - 20mm x 16mm, 57040 - P733.2525 - 25mm x 25mm, 57041 - P733.2516 - 25mm x 16mm, 57042 - P733.2520 - 25mm x 20mm, 57050 - P733.3232 - 32mm x 32mm & 57052 - P733.3225 - 32mm x 25mm.
• Factor: KE KELIT
  Company Name

  KE KELIT
  View All Listings by this Company

‘Tweetop system’ consisting of brass bodied nickel plated (external plating) compression or press for use with ‘Tweetop multilayer pipe’ PERT/AL/PERT. The press fitting is achieved by use of a press fitting tool. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1812383
• Expiry date: 31/12/2023
• Size: Compression: 16mm, 20mm, 25mm. Press Fittings: 16mm, 20mm, 25mm, 32mm, 40mm, 63mm. Pipe: 16 - 63mm.
• Marking: Compression fittings: Tweetop ‘T’ logo, size, ISO 21003, production date and manufacturing source on compression nut, Press fittings: Tweetop ‘T’ logo, letter for Type (L for elbow; T for Tee) and size on Body. Tweetop name and ‘T’ logo, size, U (press profile), ISO standard, production date and manufacturing source on sleeve. Key to production date/manufacturing source = aAY  a (month), A (Year), Y (production facility). Where:_ a = Month, starting with a = January, b= February etc. A = Year, starting with G = 2018, H = 2019, I = 2020, J = 2021, K = 2022, L = 2023. Y = Manufacturing facility denoted by the letter E, J or F. e.g. bGE = manufactured February 2018 by facility E Pipe: Tweetop PERT, size, pressure ratings and date of manufacture (YYYY/MM/DD).
• Installation Requirements R001
• Model
  Imperial threaded connections = BSP, all other sizes = mm. PRESS COUPLING: 06011003 - 16x16, 06011005 - 18x18, 06011007 - 20x20, 06011009 - 25x25, 06011011 - 32x32, 06011013 - 40x40, 06011015 - 50x50, 06011017 - 63x63. PRESS COUPLING-REDUCER: 06011103 - 18x16, 06011105 - 20x16, 06011107 - 25x16, 06011109 - 32x16, 06011111 - 20x18, 06011113 - 25x18, 06011115 - 32x18, 06011117 - 25x20, 06011119 - 32x20, 06011121 - 32x25, 06011122 - 40x20, 06011123 - 40x25, 06011124 - 50x25, 06011125 - 40x32, 06011126 - 50x32, 06011127 - 50x40, 06011120 - 63x25, 06011128 - 63x32, 06011129 - 63x40, 06011131 - 63x50. MALE PRESS CONNECTION: 06011205 - 16x½", 06011207 - 16x¾", 06011209 - 16x1", 06011211 - 18x½”, 06011213 - 18x¾”, 06011215 - 20x½", 06011217 - 20x¾", 06011219 - 20x1", 06011221 - 25x½", 06011223 - 25x¾", 06011225 - 25x1", 06011227 - 32x¾", 06011229 - 32x1", 06011231 - 32x1½", 06011233 - 32x1¼", 06011235 - 40x1¼", 06011237 - 50x1½", 06011239 - 50x2", 06011241 - 63x2". FEMALE PRESS CONNECTION: 06011305 - 16x½", 06011307 - 16x¾", 06011309 - 16x1", 06011311 - 18x½”, 06011313 - 18x¾”, 06011315 - 20x½", 06011317 - 20x¾", 06011319 - 20x1", 06011321 - 25x½", 06011323 - 25x¾", 06011325 - 25x1", 06011327 - 32x¾", 06011329 - 32x1", 06011331 - 40x1¼", 06011333 - 50x1½". PRESS SCREW CONNECTION WITH FEMALE THREAD: 06011403 - 16x½", 06011405 - 20x¾", 06011407 - 20x1", 06011409 - 25x¾", 06011411 - 25x1", 06011413 - 32x1". PRESS ELBOW 90: 06012003 - 16x16, 06012005 - 18x18, 06012007 - 20x20, 06012009 - 25x25, 06012011 - 32x32, 06012013 - 40x40, 06012015 - 50x50, 06012017 - 63x63. PRESS ELBOW 90 WITH MALE thread: 06012103 - 16x½", 06012107 - 16x¾", 06012105 - 18x½”, 06012109 - 20x½", 06012111 - 20x¾", 06012113 - 25x½", 06012115 - 25x¾", 06012117 - 25x1", 06012119 - 32x1", 06012121 - 40x1". PRESS ELBOW 90 WITH FEMALE thread: 06012203 - 16x½", 06012205 - 16x¾", 06012207 - 18x½", 06012209 - 20x½", 06012211 - 20x¾", 06012213 - 25x½", 06012215 - 25x¾", 06012217 - 25x1", 06012219 - 32x1", 06012222 - 40x1½", 06012225 - 50x1½". PRESS ELBOW 90 REDUCER: 06012303 - 20x16, 06012305 - 25x16, 06012307 - 25x20, 06012309 - 32x20, 06012311 - 40x25, 06012313 - 40x32. PRESS ELBOW 90 - TAP CONNECTION: 06012403 - 16x½", 06012404 - 16x½"x16, 06012405 - 18x½", 06012407 - 20x½". PRESS TEE: 06013003 - 16x16x16, 06013005 - 18x18x18, 06013007 - 20x20x20, 06013009 - 25x25x25, 06013011 - 32x32x32, 06013013 - 40x40x40, 06013015 - 50x50x50, 06013017 - 63x63x63. PRESS TEE WITH REDUCER: 06013103 - 16x25x16, 06013105 - 16x20x16, 06013106 - 16x18x16, 06013107 - 20x16x16, 06013108 - 18x16x16, 06013109 - 20x16x20, 06013110 - 18x16x18, 06013111 - 20x18x20, 06013113 - 20x20x16, 06013115 - 20x25x20, 06013117 - 25x16x25, 06013119 - 25x18x25, 06013121 - 25x20x25, 06013123 - 25x20x20, 06013125 - 25x25x20, 06013127 - 25x32x25, 06013129 - 32x16x32, 06013131 - 32x20x32, 06013133 - 32x25x32, 06013134 - 40x20x40, 06013135 - 40x25x40, 06013137 - 40x32x40, 06013138 - 50x25x50, 06013139 - 50x32x50, 06013141 - 50x40x50, 06013142 - 63x32x63, 06013143 - 63x40x63, 06013145 - 63x50x63. PRESS TEE WITH FEMALE thread: 06013203 - 16x½"x16, 06013205 - 20x½"x20, 06013207 - 20x¾"x20, 06013209 - 25x½"x25, 06013211 - 25x¾"x25, 06013213 - 25x1"x25, 06013215 - 32x¾"x32, 06013217 - 32x1"x32, 06013219 - 40x¾"x40. PRESS TEE WITH MALE thread: 06013303 - 16x½"x16, 06013305 - 20x½"x20. BRASS STOP END PRESS FIT: 06011803 - 16. COMPRESSION COUPLING: 06021001 - 16x16, 06021003 - 20x20, 06021005 - 25x25. COMPRESSION COUPLING REDUCER: 06021101 - 20x16, 06021103 - 25x20, 06021105 - 25x16. MALE COMPRESSION CONNECTION: 06021201 - 16x½", 06021203 - 16x¾", 06021205 - 16x1", 06021207 - 20x½", 06021209 - 20x¾", 06021211 - 20x1", 06021213 - 25x½", 06021215 - 25x¾", 06021217 - 25x1". FEMALE COMPRESSION CONNECTION: 06021301 - 16x½", 06021303 - 16x¾", 06021305 - 16x1" , 06021307 - 20x½", 06021309 - 20x¾", 06021311 - 20x1" , 06021313 - 25x½", 06021315 - 25x¾", 06021317 - 25x1". COMPRESSION ELBOW 90: 06022001 - 16x16, 06022003 - 20x20, 06022005 - 25x25. COMPRESSION ELBOW 90 WITH MALE thread: 06022101 - 16x½", 06022103 - 16x¾", 06022105 - 20x½", 06022107 - 20x¾". COMPRESS. ELBOW 90 WITH FEMALE thread: 06022201 - 16x½", 06022203 - 16x¾", 06022205 - 20x½", 06022207 - 20x¾", 06022209 - 25x½", 06022211 - 25x¾". COMPRESSION TEE: 06030201 - 16x16x16, 06030203 - 20x20x20, 06030205 - 25x25x25. COMPRESSION TEE WITH REDUCER: 06031201 - 16x25x16, 06031203 - 20x16x20, 06031205 - 20x25x20, 06031207 - 25x16x25, 06031209 - 25x20x25, 06031211 - 25x20x20, 06031213 - 25x25x20. COMPRESSION TEE WITH FEMALE thread: 06032201 - 16x½"x16, 06032203 - 20x½"x20, 06032205 - 20x¾"x20, 06032207 - 25x½"x25, 06032209 - 25x¾"x25. COMPRESSION TEE WITH MALE thread: 06033201 - 16x½"x16, 06033203 - 20x½"x20. COMPRESSION ELBOW 90 - TAP CONN: 06022401 - 16x½"F, 06022403 - 20x½"F. COMPRESSION FOUR WAY FITTING: 06024001 - 16x16x16x16, 06024003 - 20x20x20x20. MULTILAYER PIPE PERT/AL/PERT: 06010103/100 - 16x2, 06010103/200 - 16x2, 06010103/600 - 16x2, 06010103/4 - straight bars 16x2,0, 06010105/200 - 18x2, 06010107/100 - 20x2, 06010107/200 - 20x2, 06010107/4 - straight bars 20x2,0, 06010109/50 - 25x2,5, 06010109/100 - 25x2,5, 06010109/4 - straight bars 25x2,5, 06010111/50 - 32x3, 06010111/4 - straight bars 32x3,0, 06010113 - straight bars 40x4,0, 06010115 - straight bars 50x4,5, 06010117 - straight bars 63x6,0, 06010103/100 - 16x2.
• Factor: Tweetop Sp Z.o.o
  Company Name

  Tweetop Sp Z.o.o
  View All Listings by this Company

‘Viega System Raxofix’ range of press-fit fittings with PPSU and gunmetal bodies for use with Viega Raxofix multilayer pipe PERT/AL/PERT. The press fitting is achieved by use of a press fitting tool. Maximum working pressure 10.0 Bar. Maximum working temperature 70°C

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1901375
• Expiry date: 31/01/2024
• Size: 16mm - 63mm
• Marking: Viega and size on body of fitting. Pipe is printed with Viega, size and material type
• Installation Requirements R001
• Model
  Viega system Raxofix range Fittings: 5311, 5312, 5313, 5313P, 5314, 531411, 5315, 51153, 5316, 5317, 5318, 53189, 532161, 532171, 532172, 532181, 5323, 53243, 5325, 53254, 53255, 53256, 53257, 532578, 53528, 5326, 532605, 532606, 532607, 532608, 532608, 532609, 532631, 532632, 53264, 5329, 53321, 533211, 533231, 53324, 533281, 5355, 5356, 5363, 5376 & 5381 Pipe: 5301, 5302, 53023, 53023, 53024, 53025, 53026, 5303, 5304 & 53041.
• Manufacturer: Viega GmbH & Co. KG
  Company Name

  Viega GmbH & Co. KG
  View All Listings by this Company

Range of Speedit+ push-fit fittings for use with Speedit+ Composite (PE-Xc/Al/PE-Xb) pipe. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1901387
• Expiry date: 31/01/2024
• Size: See model
• Marking: Fittings: JG logo (brand of Reliance Worldwide Corporation (UK) Ltd.) & size on body. Pipes: JG Speedfit, size, PE-Xc/Al/PE-Xb, operating parameters and technical information on pipe.
• Installation Requirements R001
• Model
  ‘Speedit+’ Range of Fittings: Straight Connector: AC0416 – 16mm, AC0420 – 20mm, AC0426 – 26mm & AC0432 – 32mm. Elbow Connector: AC0316 – 16mm, AC0320 – 20mm, AC0326 – 26mm & AC0332 – 32mm. Tee Connector: AC0216 – 16mm, AC0220 – 20mm, AC0226 – 26mm & AC0232 – 32mm. End Stop: AC4616 – 16mm, AC4620 – 20mm, AC4626 – 26mm & AC4632 – 32mm. BSP (F) Straight Adaptor: AC451614 – 16mm x ½” & AC452014 – 20mm x ½”, AC452016 – 20mm x ¾”, AC452616 – 26mm x ¾”, AC452618 – 26mm x 1” & AC453218 – 32mm x 1”. BSP (M) Straight Adaptor: AC011614 – 16mm x ½”, AC011616 – 16mm x ¾”, AC012014 – 20mm x ½”, AC012016 – 20mm x ¾”, AC012618 – 26mm x 1” & AC013218 – 32mm x 1”. Unequal Straight Connector: AC202016 – 20mm x 16mm, AC202620 – 26mm x 20mm & AC203226 – 32mm x 26mm. Copper Convertor: ACASC1615 – 16mm x 15mm, ACASC1616 – 16mm x 16mm, ACASC2020 – 20mm x 20mm, ACASC2022 – 20mm x 22mm & ACASC2622 – 26mm x 22mm. Unequal Tee Connector: AC30162016 – 16mm x 20mm x 16mm, . AC30201616 – 20mm x 16mm x 16mm, AC30201620 – 20mm x 16mm x 20mm, AC30202016 – 20mm x 20mm x 16mm, AC30202620 – 20mm x 26mm x 20mm, AC30261620 – 26mm x 16mm x 20mm, AC30261626 – 26mm x 16mm x 26mm, AC30262020 – 26mm x 20mm x 20mm, AC30262026 – 26mm x 20mm x 26mm, AC30262620 – 26mm x 26mm x 26mm & AC30261620 – 30mm x 26mm x 20mm. BSP (F) Tap Adaptor: ACSTC1614 – 16mm x ½”, ACSTC2014 – 20mm x ½”, ACSTC2016 – 20mm x ¾”, ACSTC2616 – 26mm x ¾”, ACSTC2618 – 26mm x 1” & ACSTC3218 – 32mm x 1”. BSP (F) Female Elbow Adaptor: ACFEA1614 – 16mm x ½” & ACFEA2016 – 20mm x ¾”. ‘Speedfit+’ Composite (PE-Xc/Al/PE-Xb) Pipe: 16ACP-5L - 16mm x 5m length, 16ACP-50C - 16mm x 50m coil, 16ACP-100C - 16mm x 100m coil, 16ACP-150-C - 16mm x 150m coil, 20ACP-20X5L - 20mm x 5m length, 20ACP-50C - 20mm x 50m coil, 20ACP-100C - 20mm x 100m coil, 20ACP-150C - 20mm x 150m coil, 26ACP-20X5L - 26mm x 5m length, 26ACP-50C - 26mm x 50m coil, 32ACP-20X5L - 32mm x 5m length & 32ACP-50C - 32mm x 50m coil.
• Factor: Reliance Worldwide Corporation (UK) Limited
  Company Name

  Reliance Worldwide Corporation (UK) Limited
  View All Listings by this Company

‘Hetta system’ consisting of brass bodied nickel plated (external plating) compression or press for use with ‘Hetta Pert pipe’ PERT/AL/PERT. The press fitting is achieved by use of a press fitting tool. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1812391
• Expiry date: 31/12/2023
• Size: Compression: 16mm, 20mm, 25mm. Press Fittings: 16mm, 20mm, 25mm, 32mm, 40mm, 63mm. Pipe: 16 - 63mm.
• Marking: COMPRESSION FITTINGS TWEETOP "T" LOGO, SIZE, ISO 21003 ON COMPRESSION NUT. TWEETOP LOGO ON BODY PIPE: HETTA, WRAS, PERT, DATE OF MANUFACTURE YYYY/MM/DD, DN & PN ON PIPE
• Installation Requirements R001
• Model
  Imperial threaded connections = BSP, all other sizes = mm. PRESS COUPLING: HSPS16 - 16x16, HS06011005 - 18x18, HS06011007 - 20x20, HS06011009 - 25x25, HS06011011 - 32x32, HS06011013 - 40x40, HS06011015 - 50x50, HS06011017 - 63x63. PRESS COUPLING-REDUCER: HS06011103 - 18x16, HS06011105 - 20x16, HS06011107 - 25x16, HS6011109 - 32x16, HS06011111 - 20x18, HS06011113 - 25x18, HS06011115 - 32x18, HS06011117 - 25x20, HS06011119 - 32x20, HS06011121 - 32x25, HS06011122 - 40x20, HS06011123 - 40x25, HS06011124 - 50x25, HS06011125 - 40x32, HS06011126 - 50x32, HS06011127 - 50x40, HS06011120 - 63x25, HS06011128 - 63x32, HS06011129 - 63x40, HS06011131 - 63x50. MALE PRESS CONNECTION: HSPS1612 - 16x½", HS06011207 - 16x¾", HS06011209 - 16x1", HS06011211 - 18x½”, HS06011213 - 18x¾”, HS06011215 - 20x½", HS06011217 - 20x¾", HS06011219 - 20x1", HS06011221 - 25x½", HS06011223 - 25x¾", HS06011225 - 25x1", HS06011227 - 32x¾", HS06011229 - 32x1", HS06011231 - 32x1½", HS06011233 - 32x1¼", HS06011235 - 40x1¼", HS06011237 - 50x1½", HS06011239 - 50x2", HS06011241 - 63x2". FEMALE PRESS CONNECTION: HS06011305 - 16x½", HS06011307 - 16x¾", HS06011309 - 16x1", HS06011311 - 18x½”, HS06011313 - 18x¾”, HS06011315 - 20x½", HS06011317 - 20x¾", HS06011319 - 20x1", HS06011321 - 25x½", HS06011323 - 25x¾", HS06011325 - 25x1", HS06011327 - 32x¾", HS06011329 - 32x1", HS06011331 - 40x1¼", HS06011333 - 50x1½". PRESS SCREW CONNECTION WITH FEMALE THREAD: HS06011403 - 16x½", HS06011405 - 20x¾", HS06011407 - 20x1", HS06011409 - 25x¾", HS06011411 - 25x1", HS06011413 - 32x1". PRESS ELBOW 90: HS06012003 - 16x16, HS06012005 - 18x18, HS06012007 - 20x20, HS06012009 - 25x25, HS06012011 - 32x32, HS06012013 - 40x40, HS06012015 - 50x50, HS06012017 - 63x63. PRESS ELBOW 90 WITH MALE thread: HSPE1612 - 16x½", HSPE16 - 16x¾", HS06012105 - 18x½”, HS06012109 - 20x½", HS06012111 - 20x¾", HS06012113 - 25x½", HS06012115 - 25x¾", HS06012117 - 25x1", HS06012119 - 32x1", HS06012121 - 40x1". PRESS ELBOW 90 WITH FEMALE thread: HS06012203 - 16x½", HS06012205 - 16x¾", HS06012207 - 18x½", HS06012209 - 20x½", HS06012211 - 20x¾", HS06012213 - 25x½", HS06012215 - 25x¾", HS06012217 - 25x1", HS06012219 - 32x1", HS06012222 - 40x1½", HS06012225 - 50x1½". PRESS ELBOW 90 REDUCER: HS06012303 - 20x16, HS06012305 - 25x16, HS06012307 - 25x20, HS06012309 - 32x20, HS06012311 - 40x25, HS06012313 - 40x32. PRESS ELBOW 90 - TAP CONNECTION: HS06012403 - 16x½", HS06012404 - 16x½"x16, HS06012405 - 18x½", HS06012407 - 20x½". PRESS TEE: HSET01 - 16x16x16, HS06013005 - 18x18x18, HS06013007 - 20x20x20, HS06013009 - 25x25x25, HS06013011 - 32x32x32, HS06013013 - 40x40x40, HS06013015 - 50x50x50, HS06013017 - 63x63x63. PRESS TEE WITH REDUCER: HS06013103 - 16x25x16, HS06013105 - 16x20x16, HS06013106 - 16x18x16, HS06013107 - 20x16x16, HS06013108 - 18x16x16, HS06013109 - 20x16x20, HS06013110 - 18x16x18, HS06013111 - 20x18x20, HS06013113 - 20x20x16, HS06013115 - 20x25x20, HS06013117 - 25x16x25, HS06013119 - 25x18x25, HS06013121 - 25x20x25, HS06013123 - 25x20x20, HS06013125 - 25x25x20, HS06013127 - 25x32x25, HS06013129 - 32x16x32, HS06013131 - 32x20x32, HS06013133 - 32x25x32, HS06013134 - 40x20x40, HS06013135 - 40x25x40, HS06013137 - 40x32x40, HS06013138 - 50x25x50, HS06013139 - 50x32x50, HS06013141 - 50x40x50, HS06013142 - 63x32x63, HS06013143 - 63x40x63, HS06013145 - 63x50x63. PRESS TEE WITH FEMALE thread: HS06013203 - 16x½"x16, HS06013205 - 20x½"x20, HS06013207 - 20x¾"x20, HS06013209 - 25x½"x25, HS06013211 - 25x¾"x25, HS06013213 - 25x1"x25, HS06013215 - 32x¾"x32, HS06013217 - 32x1"x32, HS06013219 - 40x¾"x40. PRESS TEE WITH MALE thread: HS06013303 - 16x½"x16, HS06013305 - 20x½"x20. BRASS STOP END PRESS FIT: HS06011803 - 16. COMPRESSION COUPLING: HS06021001 - 16x16,
• Factor: Hetta Systems (UK) Ltd.
  Company Name

  Hetta Systems (UK) Ltd.
  View All Listings by this Company
• Manufacturer: Tweetop Sp Z.o.o
  Company Name

  Tweetop Sp Z.o.o
  View All Listings by this Company

Tectite Pro and Classic range of de-mountable push-fit fittings (DZR brass bodies, gunmetal elbows on Pro range) with EPDM ‘O’-rings and stainless steel grab rings. For use with Tectite standard multi-layered pipe (PE–xc/AL/PE-xc). Supplied with TectSEAL™ 3PS (TMLCP 3PS) plastic inserts. Maximum working pressure 6.0 bar @ 95°C. Maximum working pressure 16.0 bar @ 20°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1903083
• Expiry date: 31/03/2024
• Note: The plastic inserts must be used to maintain the validity of this approval.
• Size: 22mm Pushfit.
• Marking: Fitting: Tectite, size and CR marking on fitting body. Pipe: Tectite tube, date of manufacture (dd/mm/yy), WRAS and technical info printed on pipe.
• Installation Requirements R001
• Model
  Tectite Pro: TX270: straight coupling 22mm. TX270S: straight coupling slip pattern 22mm. TX270G: straight female connector 22mm x ¾” BSP.TX243G: straight male connector taper 22mm x ¾” BSP. TX243G: straight male connector parallel 22mm x ¾” BSP. TX090: elbow 22mm. TX092: street elbow 22mm. TX092G: male elbow BSP 22mm x 1”. TX090G: female elbow BSP 22mm x 1”. TX041: obtuse elbow 22mm. TX040: obtuse street elbow 22mm. TX130: equal tee 22mm . TX130G: female branch tee 22 x 22mm x ½” BSP. TX301: stop end 22mm. TX302: air release stop end 22mm. Item code 04305250: 22mm pushfit x ¾” BSP end connector. Tectite Classic: T270: straight coupling 22mm. T270S: slip coupling 22mm. T270G: straight female connector 22mm x ¾” BSP. T243G: straight male connector taper 22mm x ¾” BSP. T243G: straight male connector parallel 22mm x ¾” BSP. T5: tank connector 22mm x ¾”. T090: elbow 22mm. . T092: street elbow 22mm. T092G: Male elbow 22mm x ¾”. T471G: backplate elbow 22mm x ¾”. T041: obtuse elbow 22mm. T040: obtuse street elbow 22mm. . T130: equal tee 22mm. T130G: female branch tee 22mm x 22mm x ¾”. T301: stop end 22mm. T302: air release stop end 22mm. T062: tap connector 22mm x ¾” BSP. T063: bent tap connector 22mm x ¾” BSP. Tectite standard composite pipe. TectSEAL™ 3PS (TMLCP 3PS) plastic inserts.
• Factor: Aalberts Integrated Piping Systems Ltd.
  Company Name

  Aalberts Integrated Piping Systems Ltd.
  View All Listings by this Company
• Manufacturer: Pegler Yorkshire Group Ltd. & Yorkshire Fittings Gyártó Kft.
  Company Name

  Pegler Yorkshire Group Ltd. & Yorkshire Fittings Gyártó Kft.
  View All Listings by this Company

‘System KAN-therm Press LBP’ consisting of brass or (black) plastic press fittings for use with ‘KAN-therm’ PERT/AL/PERT pipe. The press fitting is achieved by use of a press fitting tool. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1904345
• Expiry date: 30/04/2024
• Size: 16mm, 20mm, 25mm, 26mm, 32mm, 40mm, 50mm, 63mm
• Marking: Body of fitting: company logo (‘KAN’) and size. Straight couplers are marked with the letters KAN not a logo. Stainless steel sleeve: KAN and size. Pipe: KAN-therm, production date (DD/MM/YY) & technical information.
• Installation Requirements R001
• Model
  System KAN-therm Press LBP
• Factor: KAN Sp. z o.o.
  Company Name

  KAN Sp. z o.o.
  View All Listings by this Company

‘Prineto’ sliding sleeve system consisting of brass fittings for use with ‘Prineto Stabil Multilayer Pipe' (white coloured PE-X inner layer, aluminium middle layer & white coloured PE-X outer layer). The connection is achieved by a sleeve over the pipe and fitting with the use of a sliding tool. Maximum working pressure 10.0 Bar. Maximum working temperature 90°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1907301
• Expiry date: 31/07/2024
• Size: 16mm, 20mm, 25mm, 32mm.
• Marking: Fittings: IVT , dimensions , indication of material and supplier and certification marks (DVGW, KK) and batch numbers on body. Sleeve: IVT, Size, certification mark (DVGW), Supplier indicator and batch numbers on body. Pipes: PRINETO Stabil, dimensions and certification marks on pipe.
• Installation Requirements R001
• Model
  PRINETO Wall angle: Wall angle: 20-Rp 3/4 - (article no. 878 650 090), Wall angle: 25-Rp 3/4 - (article no. 878 650 100), PRINETO Ceiling Angle: Ceiling angle: 25-Rp 3/4 - (article no. 878 650 180), Ceiling angle: 32-Rp 3/4 - (article no. 878 650 240), PRINETO Angle 90°: Angle: 16 - (article no. 878 674 110), Angle: 20 - (article no. 878 674 220), Angle: 25 - (article no. 878 674 330), Angle: 32 - (article no. 878 674 440), PRINETO Angle 45°: Angle 45°: 16 - (article no. 878 675 110), Angle 45°: 20 - (article no. 878 675 220), Angle 45°: 25 - (article no. 878 675 330), Angle 45°: 32 - (article no. 878 675 440), PRINETO Angle transition with external thread: Angle transition: 16-R 3/4 - (article no. 878 674 160), Angle transition: 20-R 3/4 - (article no. 878 674 260), Angle transition: 25-R 3/4 - (article no. 878 674 360), Angle transition: 32-R 3/4 - (article no. 878 674 460), PRINETO Angle transition with internal thread: Angle transition: 16-Rp 3/4 - (article no. 878 672 160), Angle transition: 20-Rp 3/4 - (article no. 878 672 260), Angle transition: 25-Rp 3/4 - (article no. 878 672 360), Angle transition: 25-Rp 1 - (article no. 878 672 370), Angle transition: 32-Rp 3/4 - (article no. 878 672 460), Angle transition: 32-Rp 1 - (article no. 878 672 470), PRINETO Tee with inner threaded outlet: Tee: 20-Rp 3/4-20 - (article no. 878 662 262), Tee: 25-Rp 3/4-25 - (article no. 878 662 363), Tee: 32-Rp 3/4-32 - (article no. 878 662 464), PRINETO Tee: Tee: 16 - (article no. 878 660 111), Tee: 16-20-16 - (article no. 878 660 121), Tee: 16-25-16 - (article no. 878 660 131), Tee: 20-14-20 - (article no. 878 660 202), Tee: 20-16-16 - (article no. 878 660 211), Tee: 20-16-20 - (article no. 878 660 212), Tee: 20-20-16 - (article no. 878 660 221), Tee: 20 - (article no. 878 660 222), Tee: 20-25-20 - (article no. 878 660 232), Tee: 25-16-16 - (article no. 878 660 311), Tee: 25-16-20 - (article no. 878 660 312), Tee: 25-16-25 - (article no. 878 660 313), Tee: 25-20-16 - (article no. 878 660 321), Tee: 25-20-20 - (article no. 878 660 322), Tee: 25-20-25 - (article no. 878 660 323), Tee: 25-25-16 - (article no. 878 660 331), Tee: 25-25-20 - (article no. 878 660 332), Tee: 25 - (article no. 878 660 333), Tee: 25-32-25 - (article no. 878 660 343), Tee: 32-16-32 - (article no. 878 660 414), Tee: 32-20-25 - (article no. 878 660 423), Tee: 32-20-32 - (article no. 878 660 424), Tee: 32-25-20 - (article no. 878 660 432), Tee: 32-25-25 - (article no. 878 660 433), Tee: 32-25-32 - (article no. 878 660 434), Tee: 32 - (article no. 878 660 444), PRINETO Coupler: Coupler: 16 - (article no. 878 640 110), Coupler: 20 - (article no. 878 640 220), Coupler: 25 - (article no. 878 640 330), Coupler: 32 - (article no. 878 640 440), PRINETO Reducing coupler: Reducing coupler: 20-16 - (article no. 878 640 210), Reducing coupler: 25-16 - (article no. 878 640 310), Reducing coupler: 25-20 - (article no. 878 640 320), Reducing coupler: 32-25 - (article no. 878 640 430), PRINETO Transition with external thread: Transition: 16-R 3/4 - (article no. 878 641 160), Transition: 20-R 3/4 - (article no. 878 641 260), Transition: 25-R 3/4 - (article no. 878 641 360), Transition: 32-R 3/4 - (article no. 878 641 460), PRINETO Transition with internal thread: Transition: 16-Rp 3/4 - (article no. 878 642 160), Transition: 20-Rp 3/4 - (article no. 878 642 260), Transition: 25-Rp 3/4 - (article no. 878 642 360), Transition: 32-Rp 3/4 - (article no. 878 642 460), PRINETO Transition for radial pressing: Press-type: 16-P 15 - (article no. 878 643 190), Press-type: 20-P 18 - (article no. 878 643 290), Press-type: 20-P 22 - (article no. 878 643 294), Press-type: 25-P 22 - (article no. 878 643 390), Press-type: 32-P 28 - (article no. 878 643 490), PRINETO Blind plug: Blind plug: 16 - (article no. 878 343 150), Blind plug: 20 - (article no. 878 343 160), Blind plug: 25 - (article no. 878 643 170), Blind plug: 32 - (article no. 878 643 180), PRINETO Stabil multilayer pipe: Stabil pipe 16 bundle: 16 - (article no. 878 520 100), Stabil pipe 16, 4 m rod: 16 - (article no. 878 620 100), Stabil pipe 20 bundle: 20 - (article no. 878 520 200), Stabil pipe 20, 4 m rod: 20 - (article no. 878 620 200), Stabil pipe 25 bundle: 25 - (article no. 878 520 300), Stabil pipe 25, 4 m rod: 25 - (article no. 878 620 300), Stabil pipe 32, 4 m rod: 32 - (article no. 878 620 400).
• Factor: IVT Installations – und Verbindungstechnik GmbH & Co. KG
  Company Name

  IVT Installations – und Verbindungstechnik GmbH & Co. KG
  View All Listings by this Company

‘EL’ range of compression fittings and ‘EJ’ range of press fittings (brass bodies) for use with ‘EA’ range of PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1907357
• Expiry date: 31/07/2024
• Size: ‘EL’ and ‘EJ ranges: 16mm, 20mm, 25mm, 32mm Size added to 'EL' range October 2019: 26mm
• Marking: Efield, DN & PN on fitting. Efield & technical information on pipe.
• Installation Requirements R001
• Model
  ‘EL’ and ‘EJ ranges’ of fittings for use with ‘EA16, EA20, EA25 & EA32’ multi-layered pipes.
• Manufacturer: Shandong Efield Piping System Co.,Ltd.
  Company Name

  Shandong Efield Piping System Co.,Ltd.
  View All Listings by this Company

‘Safety` range of press fittings (PPSU bodies) for use ‘Multicalor’ multi-layered PEX/Al/PEX pipe. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1907377
• Expiry date: 31/07/2024
• Size: 16mm – 75mm.
• Marking: Aquatechnik logo on fitting body. Aquatechnik, ‘Multicalor’ & techncial information on pipe.
• Installation Requirements R001
• Model
  ‘Safety’ range of fittings for use with ‘Multicalor’ multi-layered pipe.
• Manufacturer: Aquatechnik Group S.p.a.
  Company Name

  Aquatechnik Group S.p.a.
  View All Listings by this Company

Unipress range of press fittings (brass bodies) for use with Unipress PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.

• Section: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
• Section Subtitle: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
• WRAS Approval Number: 1907405
• Expiry date: 31/07/2024
• Size: 16mm, 20mm, 25mm, 32mm
• Marking: UP & SIZE ON BODY UNIPRESS & technical information on pipe.
• Installation Requirements R001
• Model
  Unipress 16 Unipress 20 Unipress 25 Unipress 26 Unipress 32 Unipress ML-Pipe 16 Unipress ML-Pipe 20 Unipress ML-Pipe 25 Unipress ML-Pipe 26 Unipress ML-Pipe 32
• Factor: PCC GmbH
  Company Name

  PCC GmbH
  View All Listings by this Company