Two-hole, single outlet, (fixed), combination tap assembly (chrome plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a manual diverter to shower outlet. The product is supplied with a shower hose, handset and metal back nuts. Maximum working pressure 10 bar. Maximum operating temperature 75°C

Section:

0525 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a semi-automatic (lockable) diverter to a shower outlet.

WRAS Approval Number:

2310404

Size:

¾” BSP (M)

Marking:

Bristan on Tap Body

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2028

Model:

RP3 GLD2 BSM C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies various finishes incorporating quarter turn ceramic disc headworks with various operating members and lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. temperature 60°C.

Section:

0525 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a semi-automatic (lockable) diverter to a shower outlet.

WRAS Approval Number:

2303397

Note:

Not supplied with hose or shower handset

Size:

¾” BSP(M)

Marking:

HIB on tap body

Installation Requirements:

R001 R006 R020

Expiry date:

31/03/2028

Model:

N0TAP06ATL Models added September 2024 N1TAP06ATL N2TAP06ATL N3TAP06ATL N4TAP06ATL

Approval Holder:

HiB Ltd.

Company Name

HiB Ltd.

Address

Building 3, North London Business Park New Southgate London

Postcode

N11 1GN

View All Listings by this Company

Range of wall mounted or floor standing spout outlets (fixed or swivel - see model in various finishes). All models incorporate a plastic flow straightener, except for the 93-Floor Mounted Bath Filler which has a plastic aerator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2303079

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

ABI on tab base

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

Floor Mounted Bath Filler 12126 – Matte Black 12128 – Brushed Brass 12127 – Brushed Nickel 12125 - Chrome 12130 – Brushed Copper 12131 - White 12129 – Brushed Gunmetal Wall Mounted Spout 15386 – Brushed Nickel 15388 – Matte Black 15385 – Brushed Gunmetal 16704 – Tumbled Aged Brass 15383 – Brushed Brass 15384 – Brushed Copper 11666 - White 15387 - Chrome Mini Wall Mounted Spout 15379 – Brushed Nickel 15381 – Matte Black 15376 – Brushed Brass 12292 – Brushed Copper 15380 - Chrome 12293 - White 12291 – Brushed Gunmetal Kingsley Wall Mounted Spout 15367 - Chrome 14654 – Matte Black 15366 – Brushed Nickel 15365 – Brushed Brass 16929 – Brushed Copper

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Range of deck mounted spout outlets (fixed or swivel - see model, Various finishes) incorporating a plastic flow straightener. The products are supplied with metal backnuts.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2303080

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

ABI ON TAP BODY

Installation Requirements:

R001 R006

Expiry date:

31/03/2028

Model:

Kingsley Mini Hob Spout 15362 – Brushed Nickel 15363 - Chrome 14650 – Matte Black 15361 – Brushed Brass 16930 – Brushed Copper Kingsley Gooseneck Swivel Hob Spout 16931 – Brushed Copper 15358 – Brushed Nickel 15359 - Chrome 15357 – Brushed Brass 15360 – Matte Black

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Range of wall mounted spout outlets with (brass bodies - various finishes) incorporating a plastic aerator in the outlet. Open outlet use only. Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240902008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Villeroy & Boch Logo on spout

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

TVW126005000xx 61 = Chrome , 74 = Brushed Chrome, 63 = Graphite, 64 = Brushed Nickel matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, 70 = Dune, K5 = Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of stainless-steel expansion bellows with either threaded or flanged end connections. Maximum working pressure JP115: 10.0 bar & JP116VS: 16.0 bar. Maximum operating temperature JP115: 82oC & JP116VS: 100°C.

Section:

0870 Tubes

Section Subtitle:

Stainless Steel.

WRAS Approval Number:

240704051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

JP115: Stourflex JP115 on ferrule end of BSP connections. JP116VS: Stourflex JP116VS on flanged end.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

JP115 Range - Stainless Steel Axial Expansion Joints With S/S BSPT Male Ends - DN15-DN80 (1/2” BSPT (M) - 3” BSPT (M)). JP116VS Range - Stainless Steel Axial Expansion Joints With Carbon Steel Vanstone Swivel NP16 Flanged End Connections (DN32-DN300).

Approval Holder:

Stourflex Ltd

Company Name

Stourflex Ltd

Address

Junction Road Audnam Stourbridge

Postcode

DY8 4YH

Country

United Kingdom

Phone

+441384 393 329

General Email

james.croydon@stourflex.co.uk

View All Listings by this Company

Range of mini shock arrestors with a stainless steel body. Models with compression connections are for use with copper tube (manufactured to EN 1057). Maximum working pressure 10.0 or 15.0 bar (please refer to model). Maximum operating temperature 70°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Altecnic, model and other information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Maximum working pressure 10.0 bar: PV05RS (0.5 litre capacity) & PV2RS (2 litre): 15mm compression. SSV05A (0.5 litre), SSV2A ACX 2 (2 litre) & SSV1C ACX 1 (1 litre): ½” BSP (M). SSV8C (8 litre): ¾” BSP (M). SSV18C (18 litre): 1” BSP (M). Maximum working pressure 15.0 bar, 0.16 litre capacity: PV016RS: 15mm compression. PV016D: ¼” BSP (M). PV016C, PV016EV ACX 0.16 EV, PC016C & PV016E: ½” BSP (M).

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models SMTFW-SLSS / SMTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2205101

Note:

Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.

Marking:

Spectrum on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/05/2027

Model:

SMSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) SMTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) SMTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT)

Approval Holder:

Spectrum

Company Name

Spectrum

Address

20/20 Business Park, Maidstone, Kent

Postcode

ME16 0LS

Country

United Kingdom

Phone

01622621940

General Email

jasmine@fileder.co.uk

View All Listings by this Company

Range of PFD press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404060

Size:

see models

Marking:

PFD & size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

60111515 15mm Pressfit Coupler 60112222 22mm Pressfit Coupler 60112828 28mm Pressfit Coupler 60113535 35mm Pressfit Coupler 60114242 42mm Pressfit Coupler 60115454 54mm Pressfit Coupler 60171515 15mm Pressfit Slip Coupler 60172222 22mm Pressfit Slip Coupler 60172828 28mm Pressfit Slip Coupler 60173535 35mm Pressfit Slip Coupler 60174242 42mm Pressfit Slip Coupler 60175454 54mm Pressfit Slip Coupler 60411515 15mm Pressfit Elbow 60412222 22mm Pressfit Elbow 60412828 28mm Pressfit Elbow 60413535 35mm Pressfit Elbow 60414242 42mm Pressfit Elbow 60415454 54mm Pressfit Elbow 60431515 15mm Pressfit Street Elbow 60432222 22mm Pressfit Street Elbow 60432828 28mm Pressfit Street Elbow 60433535 35mm Pressfit Street Elbow 60434242 42mm Pressfit Street Elbow 60435454 54mm Pressfit Street Elbow 60451515 15mm Pressfit Obtuse Elbow 60452222 22mm Pressfit Obtuse Elbow 60452828 28mm Pressfit Obtuse Elbow 60453535 35mm Pressfit Obtuse Elbow 60454242 42mm Pressfit Obtuse Elbow 60455454 54mm Pressfit Obtuse Elbow 60481515 15mm Pressfit Obtuse Street Elbow 60482222 22mm Pressfit Obtuse Street Elbow 60482828 28mm Pressfit Obtuse Street Elbow 60483535 35mm Pressfit Obtuse Street Elbow 60484242 42mm Pressfit Obtuse Street Elbow 60485454 54mm Pressfit Obtuse Street Elbow 60132215 22 x 15mm Pressfit Fitting Reducing 60132815 28 x 15mm Pressfit Fitting Reducing 60132822 28 x 22mm Pressfit Fitting Reducing 60133515 35mm x 15mm Pressfit Fitting Reducing 60133522 35 x 22mm Pressfit Fitting Reducing 60133528 35 x 28mm Pressfit Fitting Reducing 60134215 42 x 15mm Pressfit Fitting Reducing 60134222 42 x 22mm Pressfit Fitting Reducing 60134228 42 x 28mm Pressfit Fitting Reducing 60134235 42 x 35mm Pressfit Fitting Reducing 60135415 54 x 15mm Pressfit Fitting Reducing 60135422 54 x 22mm Pressfit Fitting Reducing 60135428 54 x 28mm Pressfit Fitting Reducing 60135435 54 x 35mm Pressfit Fitting Reducing 60135442 54 x 42mm Pressfit Fitting Reducing 60151515 15x15x15 mm Pressfit Equal Tee 60222222 22x22x22 mm Pressfit Equal Tee 60282828 28x28x28 mm Pressfit Equal Tee 60353535 35x35x35 mm Pressfit Equal Tee 60424242 42x42x42 mm Pressfit Equal Tee 60545454 54x54x54 mm Pressfit Equal Tee 60222215 22x22x15 mm Pressfit Reducing Tee 60282815 28x28x15 mm Pressfit Reducing Tee 60282822 28x28x22 mm Pressfit Reducing Tee 60353515 35x35x15 mm Pressfit Reducing Tee 60353522 35x35x22 mm Pressfit Reducing Tee 60353528 35x35x28 mm Pressfit Reducing Tee 60424215 42x42x15 mm Pressfit Reducing Tee 60424222 42x42x22 mm Pressfit Reducing Tee 60424228 42x42x28 mm Pressfit Reducing Tee 60424235 42x42x35 mm Pressfit Reducing Tee 60545415 54x54x15 mm Pressfit Reducing Tee 60545422 54x54x22 mm Pressfit Reducing Tee 60545428 54x54x28 mm Pressfit Reducing Tee 60545435 54x54x35 mm Pressfit Reducing Tee 60545442 54x54x42 mm Pressfit Reducing Tee 60221522 22x15x22 mm Pressfit Reducing Tee 60221515 22x15x15 mm Pressfit Reducing Tee 60282222 28x22x22 mm Pressfit Reducing Tee 60282228 28x22x28 mm Pressfit Reducing Tee 60151522 15x15x22 mm Pressfit Reducing Tee 60811515 15mm Pressfit End Cap 60812222 22mm Pressfit End Cap 60812828 28mm Pressfit End Cap 60813535 35mm Pressfit End Cap 60814242 42mm Pressfit End Cap 60815454 54mm Pressfit End Cap 60112215 22 x 15mm Pressfit Reducing Coupler 60112815 28 x 15mm Pressfit Reducing Coupler 60112822 28 x 22mm Pressfit Reducing Coupler 60113515 35 x 15mm Pressfit Reducing Coupler 60113522 35 x 22mm Pressfit Reducing Coupler 60113528 35 x 28mm Pressfit Reducing Coupler 60114215 42 x 15mm Pressfit Reducing Coupler 60114222 42 x 22mm Pressfit Reducing Coupler 60114228 42 x 28mm Pressfit Reducing Coupler 60114235 42 x 35mm Pressfit Reducing Coupler 60115415 54 x 15mm Pressfit Reducing Coupler 60115422 55 x 22mm Pressfit Reducing Coupler 60115428 56 x 28mm Pressfit Reducing Coupler 60115435 54 x 35mm Pressfit Reducing Coupler 60115442 54 x 42mm Pressfit Reducing Coupler 60291515 15MM Pressfit Full Crossover 60292222 22MM Pressfit Full Crossover 60271515 15MM Pressfit Part Crossover 60272222 22MM Pressfit Part Crossover 60422215 22mm x 15mm Pressfit Reducing Elbow 60422815 28 x 15mm Pressfit Reducing Elbow 60422822 28mm x 22mm Pressfit Reducing Elbow

Approval Holder:

PressFit Direct Ltd.

Company Name

PressFit Direct Ltd.

Address

10 Aylesbury Court Lapworth

Postcode

B94 6BE

View All Listings by this Company

Range of fohn stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with FOHN stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303394

Size:

see model

Marking:

FOHN (brand of KONTUR EESTI OÜ), size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler S15х1/2"W – 15 x 15mm S15х3/4"W – 15 x 15mm S18х1/2"W – 18 x 18mm S18х3/4"W – 18 x 18mm S22х1/2"W – 22 x 22mm S22х3/4"W – 22 x 22mm S22х1"W – 22 x 22mm S28х3/4"W – 28 x 28mm S28x1"W – 28 x 28mm S35x1"W – 35 x 35mm S35x1 1/4"W – 35 x 35mm S42х1 1/2"W – 42 x 42mm S54х2"W – 54 x 54mm Male threaded coupler with straight pipe 15х1/2"W – 15 x 15mm 15x3/4"W – 15 x 15mm 18х1/2"W – 18 x 18mm 18х3/4"W – 18 x 18mm 18x1"W – 18 x 18mm 22х1/2"W – 22 x 22mm 22х3/4"W – 22 x 22mm 22x1"W – 22 x 22mm 28х3/4"W – 28 x 28MM 28х1"W – 28 x 28mm 35х1 1/4"W – 35 x 35mm 42х1 1/2"W – 42 x 42mm 54х2"W – 54 x 54mm Female threaded coupler S15х1/2"N – 15 x 15mm S18х1/2"N – 18 x 18mm S18х3/4"N – 18 x 18mm S22х1/2"N – 22 x 22mm S22х3/4"N – 22 x 22mm S28х3/4"N – 28 x 28mm S28х1"N – 28 x 28mm S35x1"N – 35 x 35mm S35x1 1/4"N – 35 x 35mm S42х1 1/2"N – 42 x 42mm S54х2"N – 54 x 54mm Female threaded coupler with straight pipe 15х1/2"N – 15 x 15mm 15x3/4"N – 15 x 15mm 18х1/2"N – 18 x 18mm 18х3/4"N – 18 x 18mm 18x1"N – 18 x 18mm 22х1/2"N – 22 x 22mm 22х3/4"N – 22 x 22mm 22x1"N – 22 x 22mm 28х3/4"N – 28 x 28mm 28х1"N – 28 x 28mm 35х1 1/4"N – 35 x 35mm 42х1 1/2"N – 42 x 42mm 54х2"N – 54 x 54mm Coupler S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S18х15Ⅱ – 15 x 15mm S22х15Ⅱ – 15 x 15mm S22х18Ⅱ – 18 x 18mm S28х15Ⅱ – 15 x 15mm S28х18Ⅱ – 18 x 18mm S28х22Ⅱ – 22 x 22mm S35х15Ⅱ – 15 x 15mm S35х18Ⅱ – 18 x 18mm S35х22Ⅱ – 22 x 22mm S35х28Ⅱ – 28 x 28mm S42х22Ⅱ – 22 x 22mm S42х28Ⅱ – 28 x 28mm S42х35Ⅱ – 35 x 35mm S54х28Ⅱ – 28 x 28mm S54х35Ⅱ – 35 x 35mm S54х42Ⅱ – 42 x 42mm Adjustable connector S15Ⅱ – 15 x 15mm S18Ⅱ – 18 x 18mm S22Ⅱ – 22 x 22mm S28Ⅱ – 28 x 28mm S35Ⅱ – 35 x 35mm S42Ⅱ – 42 x 42mm S54Ⅱ – 54 x 54mm Union H15х1/2" – 15 x 15mm H15х3/4" – 15 x 15mm H18х1/2" – 18 x 18mm H18х3/4" – 18 x 18mm H22х1/2" – 22 x 22mm H22х3/4" – 22 x 22mm H28х3/4" – 28 x 28mm H28х1" – 28 x 28mm H35x1" – 35 x 35mm H35x1 1/4" – 35 x 35mm H42х1 1/2" – 42 x 42mm H54х2" – 54 x 54mm Tee T15 – 15 x 15mm T18х15х18 – 18 x 18mm T18 – 18 x 18mm T22х18х22 – 22 x 22mm T22х15х22 – 22 x 22mm T22 – 22 x 22mm T28x15x28 – 28 x 28mm T28х22х22 – 28 x 28mm T28x22x28 – 28 x 28mm T28 – 28 x 28mm T35x15x35 – 35 x 35mm T35x22x35 – 35 x 35mm T35x28x35 – 35 x 35mm T35 – 35 x 35mm T42х35х42 – 42 x 42mm T42 – 42 x 42mm T54х42х54 – 54 x 54mm T54 – 54 x 54mm Female threaded Tee T15х1/2"Nx15 – 15 x 15mm T18х1/2"Nx18 – 18 x 18mm T18х3/4"Nx18 – 18 x 18mm T22х1/2"Nx22 – 22 x 22mm T22х3/4"Nx22 – 22 x 22mm T28х1/2"Nx28 – 28 x 28mm T28х3/4"Nx28 – 28 x 28mm T28х1"Nx28 – 28 x 28mm T35х1"Nx35 – 35 x 35mm T35х1 1/4"Nx35 – 35 x 35mm T42х1 1/2"Nх42 – 42 x 42mm T54х2"Nх54 – 54 x 54mm Male threaded Tee T15х1/2"Wx15 – 15 x 15mm T18х1/2"Wx18 – 18 x 18mm T18х3/4"Wx18 – 18 x 18mm T22х1/2"Wx22 – 22 x 22mm T22х3/4"Wx22 – 22 x 22mm T28х1/2"Wx28 – 28 x 28mm T28х3/4"Wx28 – 28 x 28mm T28х1"Wx28 – 28 x 28mm T35х1"Wx35 – 35 x 35mm T35х1 1/4"Wx35 – 35 x 35mm T42х1 1/2"Wх42 – 35 x 35mm T54х2"Wх54 – 54 x 54mm 90°B Elbow L15a – 15 x 15mm L18а – 18 x 18mm L22a – 22 x 22mm L28a – 28 x 28mm L35a – 35 x 35mm L42а – 42 x 42mm L54а – 54 x 54mm 90°A Elbow L15 – 15 x 15mm L18 – 18 x 18mm L22 – 22 x 22mm L28 – 28 x 28mm L35 – 35 x 35mm L42 – 42 x 42mm L54 – 54 x 54mm Female threaded elbow L15х1/2"N – 15 x 15mm L18х1/2"N – 18 x 18mm L18х3/4"N – 18 x 18mm L22х1/2"N – 22 x 22mm L22х3/4"N – 22 x 22mm L28х3/4"N – 28 x 28mm L35х1"N – 35 x 35mm Male threaded elbow L15x1/2"W – 15 x 15mm L18х1/2"W – 18 x 18mm L18х3/4"W – 15 x 15mm L22x1/2"W – 22 x 22mm L22x3/4"W – 22 x 22mm L28x3/4"W – 28 x 28mm L35x1"W – 35 x 35mm Female threaded elbow with base L15х1/2"N(a) – 15 x 15mm L18х1/2"N(a) – 18 x 18mm L22х1/2"N(a) – 22 x 22mm L22х3/4"N(a) – 22 x 22mm 45°B Elbow 45°L15a – 15 x 15mm 45°L18а – 18 x 18mm 45°L22a – 22 x 22mm 45°L28a – 28 x 28mm 45°L35a – 35 x 35mm 45°L42а – 42 x 42mm 45°L54а – 54 x 54mm 45°A Elbow 45°L15 – 15 x 15mm 45°L18 – 18 x 18mm 45°L22 – 22 x 22mm 45°L28 – 28 x 28mm 45°L35 – 35 x 35mm 45°L42 – 42 x 42mm 45°L54 – 54 x 54mm One end pipe bridge Ω15a – 15 x 15mm Ω18a – 18 x 18mm Ω22a – 22 x 22mm Pipe Bridge Ω15 – 15 x 15mm Ω18 – 18 x 18mm Ω22 – 22 x 22mm Ω28 – 28 x 28mm Cap D15 – 15 x 15mm D18 – 18 x 18mm D22 – 22 x 22mm D28 – 28 x 28mm D35 – 35 x 35mm D42 – 42 x 42mm D54 – 54 x 54mm Pipe Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm

Approval Holder:

KONTUR EESTI OÜ

Company Name

KONTUR EESTI OÜ

Address

Türi tn 10d, Tallinn, 11313, Harju maakond

Country

Estonia

View All Listings by this Company

TP range of capillary solder ring copper fittings for use with copper tube EN1057, for above ground use only. Maximum working pressure: 25.0 bar. Maximum operating temperature: 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404065

Size:

see models

Marking:

TPX & size etched on body

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLER TP0108 8mm, TP0110 10mm, TP0112 12mm, TP0115 15mm, TP0122 22mm, TP0128 28mm, TP0135 35mm, TP0142 42mm, TP0154 54mm. SLIP COUPLER TP01S15 15mm, TP01S22 22mm, TP01S28 28mm, REDCUED COUPLER TP01R1008 10mm x 8mm, TP01R1508 15mm x 8mm, TP01R1510 15mm x 10mm, TP01R1512 15mm x 12mm, TP01R2210 2mm x 10mm, TP01R2215 22mm x 15mm, TP01R2815 28mm x 15mm, TP01R2822 28mm x 22mm, TP01R3522 35mm x 22mm, TP01R3528 35mm x 28mm, TP01R4235 42mm x 35mm, TP01R5442 54mm x 42mm. 90° Elbow TP1208 8mm, TP1210 10mm, TP1212 12mm, TP1215 15mm, TP1222 22mm, TP1228 28mm, TP1235 35mm, TP1242 42mm, TP1254 54mm. STREET ELBOW TP12S15 15mm, TP12S22 22mm, TP12S28 28mm, 45° ELBOW TP2115 15mm, TP2122 22mm, TP2128 28mm, TP2135 35mm, TP2142 42mm, TP2154 54mm. FITTING REDUCER TP061008 10mm x 8mm, TP061508 15mm x 8mm, TP061510 15mm x 10mm, TP061512 15mm x 12mm, TP062212 22mm x 12mm, TP062215 22mm x 15mm, TP062815 28mm x 15mm, TP062822 28mm x 22mm, TP063515 35mm x 15mm, TP063522 35mm x 22mm, TP063528 35mm x 28mm, TP064215 42mm x 15mm, TP064222 42mm x 22mm, TP064228 42mm x 28mm, TP064235 42mm x 35mm, TP065415 54mm x 15mm, TP065422 54mm x 22mm, TP065428 54mm x 28mm, TP065435 54mm x 35mm, TP065442 54mm x 42mm STOP END 10mm, TP6110 12mm, TP6112 15mm, TP6115 22mm, TP6122 28mm, TP6128 35mm, TP6135 42mm, TP6142 54mm. TP6154 EQUAL TEE TP2408 8mm, TP2410 10mm, TP2412 12mm, TP2415 15mm, TP2422 22mm, TP2428 28mm, TP2435 35mm, TP2442 42mm, TP2454 54mm TEE - REDUCED BOTH ENDS TP25222215 22mm x 22mm x 15mm, TP25282815 28mm x 28mm x 15mm, TP25282822 28mm x 28mm x 22mm, TP25353515 35mm x 35mm x 15mm, TP25353522 35mm x 35mm x 22mm, TP25353528 35mm x 35mm x 28mm, TP25424215 42mm x 42mm x 15mm, TP25424222 42mm x 42mm x 22mm, TP25424228 42mm x 42mm x 28mm, TP25424235 42mm x 42mm x 35mm, TP25545415 54mm x 54mm x 15mm, TP25545422 54mm x 54mm x 22mm, TP25545428 54mm x 54mm x 28mm, TP25545435 54mm x 54mm x 35mm, TP25545442 54mm x 54mm x 42mm,

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of compression fitting with brass and DZR brass bodies, supplied with brass compression rings. For use with copper tube (manufactured to BS EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Marking: Conex Sanbra & size on body. DZR brass models also have CR on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Model: Conex Compression range. 303 D021020303- - 12 x 3/8” D031020303- - 12 x ½” E021020303- - 15 x 3/8” E031020303- - 15 x ½” E041020303- - 15 x ¾” E051020303- - 15 x 1” F031020303- - 18 x ½” F041020303- - 18 x ¾” G031020303- - 22 x ½” G041020303- - 22 x ¾” G051020303- - 22 x 1” H051020303- - 28 x 1” H061020303- - 28 x 1-1/4” B015020303 - 8 x ¼” B025020303 - 8 x 3/8” B035020303 - 8 x ½” C015020303 – 10 x ¼” C025020303 – 10 x 3/8” C035020303 – 10 x ½” D025020303 – 12 x 3/8” D035020303 – 12 x ½” E025020303 – 15 x 3/8” E035020303 – 15 x ½” E045020303 – 15 X ¾” F035020303 – 18 x ½” F045020303 – 18 x ¾” G045020303 – 22 x ¾” G055020303 – 22 x 1” H045020303 – 28 x ¾” H055020303 – 28 x 1” J055020303 – 35 x 1” J065020303 – 35 x 1-1/4” K075020303 – 42 x 1-1/2” N085020303 – 54 x 2” 303SF E031020303SF – 15 x ½” G041020303SF – 22 x ¾” E035020303SF – 15 x ½” E045020303SF – 15 x ¾” G045050303SF – 22 x ¾” 303ST E031020303ST – 15MM E041020303ST – 15MM G041020303ST – 22MM 321 E- - 1020321- - 15MM G- - 1020321- - 22MM H- - 1020321- - 28MM J- - 1020321- - 35MM K- - 5020321- - 42MM N- - 5020321- - 54MM 323 D- - 1020323- - 12MM E- - 1020323- - 15MM G- - 1020323- - 22MM H- - 1020323- - 28MM B- - 5020323- - 8MM C- - 5020323- - 10MM D- - 5020323- - 12MM E- - 5020323- - 15MM F- - 5020323- - 18MM G- - 5020323- - 22MM H- - 5020323- - 28MM J- - 5020323- - 35MM K- - 5020323- - 42MM N- - 5020323- - 54MM 401 DD-1020401- - 12MM EE-1020401- - 15MM FF-1020401- - 18MM GG-1020401- - 22MM HH-1020401- - 28MM JJ-1020401- - 35MM KK-1020401- - 42MM NN-1020401- - 54MM BB-5020401- - 8MM CC-5020401- - 10MM DD-5020401- - 12MM EE-5020401- - 15MM FF-5020401- - 18MM GG-5020401- - 22MM HH-5020401- - 28MM JJ-5020401- - 35MM KK-5020401- - 42MM 401R ED-1020401- - 15x12MM GE-1020401- - 22x15MM DC-5020401- - 12x10MM EC-5020401- - 15x10MM GE-5020401- - 22x15MM HG-5020401- - 28x22MM 401DA EE-1020401DA – 15MM GG-1020401DA – 22MM HH-1020401DA – 28MM 401/O EE-1020401/O – 15MM GG-1020401/O – 22MM HH-1020401/O – 28MM S401S EE-5020401S- 15MM GG-5020401S – 22MM HH-5020401S – 28MM 401V EE-1020401V- 15MM GG-1020401V – 22MM 402 E031020402- - 15 x ½” E041020402- - 15 x ¾” F031020402- - 18 x ½” G041020402- - 22 x ¾” G051020402- - 22 x 1” H041020402- - 28 x ¾” H051020402- - 28 x 1” B015020402- - 8 x ¼” C025020402- - 10 x 3/8” C035020402- - 10 x ½” D025020402- - 12 x 3/8” D035020402- - 12 x ½” E025020402- - 15 x 3/8” E035020402- - 15 x ½” E045020402- - 15 x ¾” F035020402- - 18 x ½” F045020402- - 18 x ¾” G035020402- - 22 x ½” G045020402- - 22 x ¾” H055020402- - 28 x 1” J065020402- - 35 x 1-1/4” K075020402- - 42 x 1-1/2” 402PCB E031020402CB – 15 x ½” x 38MM G041020402CB – 22 x ½” x 38MM 402TA – D021020402TA – 12 x 3/8” D031020402TA – 12 x ½” E021020402TA – 15 x 3/8” E031020402TA – 15 x ½” E041020402TA – 15 x ¾” F041020402TA – 18 x ¾” G041020402TA – 22 x ¾” G051020402TA – 22 x 1” H051020402TA – 28 x 1” 403 D031020403- - 12 X ½” E031020403- - 15 x ½” E041020403- - 15 x ¾” F031020403- - 18 x ½” F041020403- - 18 x ¾” G031020403- - 22 x ½” G041020403- - 22 x ¾” G051020403- - 22 x 1” H041020403- - 28 x ¾” H051020403- - 28 x 1” K071020403- - 42 x 1-1/2” B015020403- - 8 x ¼” C025020403- - 10 x 3/8” C035020403- - 10 x ½” D025020403- - 12 x 3/8” D035020403- - 12 x ½” E025020403- - 15 x 3/8” E035020403- - 15 x ½” E045020403- - 15 x ¾” F045020403- - 18 x ¾” G035020403- - 22 x ½” G045020403- - 22 x ¾” H055020403- - 28 x 1” J065020403- - 35 x 1-1/4” 403SF E031020403SF – 15 x ½” G031020403SF – 22 x ½” G041020403SF – 22 x ¾” E035020403SF – 15 x ½” 403W E031020403W- 15 x ½” E035020403W- 15 x ½” 403WL E031020403WE – 15 x ½” E031020403WL – 15 x ½” G031020403WL – 22 x ½” C035020403WL – 10 x ½” D035020403WL – 12 x ½” E035020403WL – 15 x ½” G045020403WL – 22 x ¾” 601EQ DDD1020601EQ – 12MM EEE1020601EQ – 15MM FFF1020601EQ – 18MM GGG1020601EQ – 22MM HHH1020601EQ – 28MM BBB5020601EQ – 8MM CCC5020601EQ – 10MM DDD5020601EQ – 12MM EEE5020601EQ – 15MM FFF5020601EQ – 18MM GGG5020601EQ – 22MM HHH5020601EQ – 28MM JJJ5020601EQ – 35MM KKK5020601EQ – 42MM 601RB GGE1020601- - 22 x 22 x 15MM HHE1020601- - 28 x 28 x 15MM HHG1020601- - 28 x 28 x 22MM NNE1020601- - 54 x 54 x 15MM NNG1020601- - 54 x 54 x 22MM NNH1020601- - 54 x 54 x 28MM DDC5020601- - 12 x 12 x 10MM EEC5020601- - 15 x 15 x 10MM EED5020601- - 15 x 15 x 12MM FFD5020601- - 18 x 18 x 12MM FFE5020601- - 18 x 18 x 15MM GGD5020601- - 22 x 22 x 12MM GGE5020601- - 22 x 22 x 15MM GGF5020601- - 28 x 28 x 18MM HHE5020601- - 28 x 28 x 15MM HHG5020601- - 28 x 28 x M22M JJE5020601- - 35 x 35 x 15MM JJG5020601- - 35 x 35 x 22MM JJH5020601- - 42 x 42 x 28MM KKE5020601- - 42 x 42 x 15MM KKG5020601- - 42 x 42 x 22MM KKH5020601- - 42 x 42 x 28MM KKJ5020601- - 42 x 42 x 35MM 601RE GEG1020601- - 22 x 15 x 22MM HEH1020601- - 28 x 15 x 28MM GEG5020601- - 22 x 15 x 22MM HGH5020601- - 28 x 22 x 28MM 601REB GEE1020601- - 22 x 15 x 15MM EDD5020601- - 15 x 12 x 12MM GEE5020601- - 22 x 15 x 15MM HGG5020601- - 28 x 22 x 22MM 601REE EEG1020601- - 15 x 15 x 22MM GGH5020601- - 22 x 22 x 28MM 615 EE35020615- - 15 x 15 x ½” GG35020615- - 22 x 22 x ½” GG45020615- - 22 x 22 x ¾” 617 EE11020617- - 15 x 15 x ¼” Ee31020317- - 15 x 15 x ½” EE41020617- - 15 x 15 x ¾” FF31020617- - 18 x 18 x ½” GG31020617- - 22 x 22 x ½” GG51020617- - 22 x 22 x 1” HH41020617- - 28 x 28 x ¾” DD2502617- - 12 x 12 x 3/8” DD3502617- - 12 x 12 x ½” EE3502617- - 15 x 15 x ½” GG3502617- - 22 x 22 x ½” GG4502617- - 22 x 22 x ¾” HH3502617- - 28 x 28 x ½” HH5502617- - 28 x 28 x 1” EE3502617W- - 15 x 15 x ½” GG3502617W- - 22 x 22 x ½” E3E502631- - 15 x ½” x 15MM G4G502631- - 22 x ¾” x 22MM 631 G4G1020631 – 22 x ¾” x 22MM 645 33E1020645- - 22 x ¾” x 22MM 684 G3G1020684 – 22 x ½” x 22MM G4G1020684 – 22 x ¾” X 22MM E3E5020684- - 15 x ½” x 15MM 901 GGGG1020901 – 22 x 22 x 22 x 22MM 301 DD-1020301- - 12MM TT-1020301- - 14MM EE-1020301- - 15MM UU-1020301- - 16MM FF-1020301- - 18MM VV-1020301- - 20MM GG-1020301- - 22MM HH-1020301- - 28MM JJ-1020301- - 35MM 301BH EE-1020301BH – 15mm 301BP DZB1020301BP – 12mm EZB1020301BP – 15mm GZB1020301BP – 22mm 301CO EE5020301CO – 15mm GG5020301CO – 22mm 301DA EE-1020301DA – 15mm GG-1020301DA – 22mm 301V EE-1020301V- 302 D011020302 – 12 x ¼” D021020302 – 12 x -3/8” D031020302 – 12 x ½” E011020302 – 15 x 1/4” E021020302 – 15 x 3/8” E031020302 – 15 x ½” E041020302 – 15 x ¾” F031020302 – 18 x ½” F041020302 – 18 x ¾” G031020302 – 22 x ½” G041020302 – 22 x ¾” G051020302 – 22 x 1” H051020302 – 28 x 1” H061020302 – 28 x 1-1/4” J061020302 – 35 x 1-1/4” K071020302 – 42 x 1-1/2” N081020302 – 54 X 2” 302B E031020302B – 15 x ½” G041020302B- 22 x ¾” H051020302B – 28 x 1” J061020302B – 35 x 1-1/4” K071020302B- 42 x 1-1/2” N081020302B – 54 x2” 302CB E031020302CB – 15 x ½” G041020302CB – 22 x ¾” 302TA D021020302TA – 12 x 3/8” D031020302TA – 12 x ½” T031020302TA – 14 x ½” E021020302TA – 15 x 3/8” E031020302TA – 15 x ½” E041020302TA – 15 x ¾” U031020302TA – 16 x ½” U041020302TA – 16 x ¾” F031020302TA – 18 x ½” F041020302TA – 18 x ¾” G031020302TA – 22 x ½” G041020302TA – 22 x ¾” G051020302TA – 22 x 1” H041020302TA – 28 x ¾” H051020302TA – 28 x 1” 401 ED-1020401 - - 15 x 12mm GE-1020401- - 22 x 15mm 403WE E031020403WE – 15 x ½” 601C EEE5020601C- 15mm GGG5020601C- 22mm

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101811

Size:

SEE MODEL

Marking:

Conex >B< logo and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupler Straight Coupler 8mm 5270 008000000 10mm 5270 010000000 12mm 5270 012000000 15mm 5270 015000000 22mm 5270 022000000 28mm 5270 028000000 35mm 5270 035000000 42mm 5270 042000000 ,54mm 5270 054000000 67mm 5270 067000000 76mm 5270 076000000 108mm 5270 108000000 Slip Coupler Slip Coupler 15mm 5270S015000000 22mm 5270S022000000 28mm 5270S028000000 35mm 5270S035000000 42mm 5270S042000000 54mm 5270S054000000 Reducing Coupler Reducing Coupler 10mmX8mm 5240 010008000 15mmX8mm 5240 015008000 15mmX10mm 5240 015010000 15mmX12mm 5240 015012000 22mmX15mm 5240 022015000 28mmX15mm 5240 028015000 28mmX22mm 5240 028022000 35mmX15mm 5240 035015000 35mmX22mm 5240 035022000 35mmX28mm 5240 035028000 42mmX22mm 5240 042022000 42mmX28mm 5240 042028000 42mmX35mm 5240 042035000 54mmX15mm 5240 054015000 54mmX22mm 5240 054022000 54mmX28mm 5240 054028000 54mmX35mm 5240 054035000 54mmX42mm 5240 054042000 Fitting Reducer Fitting Reducer 10mmX8mm 5243 010008000 12mmX8mm 5243 012008000 15mmX8mm 5243 015008000 15mmX10mm 5243 015010000 15mmX12mm 5243 015012000 22mmX15mm 5243 022015000 28mmX15mm 5243 028015000 28mmX22mm 5243 028022000 35mmX15mm 5243 035015000 35mmX22mm 5243 035022000 35mmX28mm 5243 035028000 42mmX15mm 5243 042015000 42mmX22mm 5243 042022000 42mmX28mm 5243 042028000 42mmX35mm 5243 042035000 54mmX15mm 5243 054015000 54mmX22mm 5243 054022000 54mmX28mm 5243 054028000 54mmX35mm 5243 054035000 54mmX42mm 5243 054042000 67mmX28mm 5243 067028000 67mmX35mm 5243 067035000 67mmX42mm 5243 067042000 67mmX54mm 5243 067054000 76mmX35mm 5243 076035000 76mmX42mm 5243 076042000 76mmX54mm 5243 076054000 76mmX67mm 5243 076067000 108mmX54mm 5243 108054000 108mmX67mm 5243 108067000 108mmX76mm 5243 108076000 End cap End Cap 10mm 5301 010000000 8mm 5301 008000000 15mm 5301 015000000 22mm 5301 022000000 28mm 5301 028000000 35,35mm 5301 035000000 42mm 5301 042000000 54mm 5301 054000000 Equal Tee Equal Tee 8mm 5130 008008008 10mm 5130 010010010 12mm 5130 012012012 15mm 5130 015015015 22mm 5130 022022022 28mm 5130 028028028 35mm 5130 035035035 42mm 5130 042042042 54mm 5130 054054054 67mm 5130 067067067 76mm 5130 076076076 108mm 5130 108108108 Partial Crossover Partial Crossover 15mm 5086 015000000 22mm 5086 022000000 Full crossover Full crossover 15mm 5085 015000000 22mm 5085 022000000 Imperial coupler Imperial coupler 15mmX1/2" 5241 015004000 22mmX3/4" 5241 022006000 28mmX1" 5241 028008000 90° Elbow 90° Elbow 8mm 5090 008000000 10mm 5090 010000000 15mm 5090 015000000 22mm 5090 022000000 28mm 5090 028000000 35mm 5090 035000000 42mm 5090 042000000 54mm 5090 054000000 67mm 5090 067000000 76mm 5090 076000000 108mm 5090 108000000 90° Street Elbow 90° Street Elbow 10mm 5092 010000000 15mm 5092 015000000 22mm 5092 022000000 28mm 5092 028000000 35mm 5092 035000000 42mm 5092 042000000 44mm 5092 054000000 45° Elbow 45° Elbow 15mm 5041 015000000 22mm 5041 022000000 28mm 5041 028000000 35mm 5041 035000000 42mm 5041 042000000 54mm 5041 054000000 67mm 5041 067000000 76mm 5041 076000000 108mm 5041 108000000 45° Street Elbow 45° Street Elbow 15mm 5040 015000000 22mm 5040 022000000 28mm 5040 028000000 35mm 5040 035000000 42mm 5040 042000000 54mm 5040 054000000 Reducing Tee (LXRXM) Reducing Tee 15mmX15mmX10mm 5130 015010015 15mmX15mmX12mm 5130 015012015 22mmX22mmX15mm 5130 022015015 28mmX28mmX15mm 5130 028028015 28mmX28mmX22mm 5130 028028022 35mmX35mmX15mm 5130 035015035 35mmX35mmX22mm 5130 035022035 35mmX35mmX28mm 5130 035028035 42mmX42mmX15mm 5130 042015042 42mmX42mmX22mm 5130 042022042 42mmX42mmX28mm 5130 042028042 42mmX42mmX35mm 5130 042035042 54mmX54mmX15mm 5130 054015054 54mmX54mmX22mm 5130 054022054 54mmX54mmX28mm 5130 054028054 54mmX54mmX35mm 5130 054035054 54mmX54mmX42mm 5130 054042054 67mmX67mmX28mm 5130 067028067 67mmX67mmX35mm 5130 067035067 67mmX67mmX42mm 5130 067042067 67mmX67mmX54mm 5130 067054067 76mmX76mmX28mm 5130 076028076 76mmX76mmX35mm 5130 076035076 76mmX76mmX42mm 5130 076042076 76mmX76mmX54mm 5130 076054076 76mmX76mmX67mm 5130 076067076 108mmX108mmX54mm 5130 108054108 108mmX108mmX67mm 5130 108067108 108mmX108mmX76mm 5130 108076108 Reducing Tee Reducing Tee 22mmX15mmX22mm 5130 022022015 28mmX15mmX28mm 5130 028028015 28mmX22mmX28mm 5130 028028022 35mmX28mmX35mm 5130 035035028 Reducing Tee Reducing Tee 15mmX15mmX22mm 5130 015022015 22mmX22mmX28mm 5130 022028022 Straight Tap connector (With Gasket) Straight Tap Connector 15mmX1/2" 5240G015004000 15mmX3/4" 5240G015006000 22mmX3/4" 5240G022006000 Bent tap connector (with Gasket) Bent tap connector 15mmX1/2" 5002G015004000 15mmX3/4" 5002G015006000 22mmX3/4" 5002G022006000

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper or stainless-steel brazed heat exchangers available with various number of plates as listed below. Maximum working pressure 25.0 Bar (copper brazed models). Maximum working pressure 10.0 Bar (stainless steel brazed models). Maximum operating temperature 100.0°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

4G3/4 models = ¾” BSP, 4AYB models = 8mm porthole (XB05H-1-xx-2STS_10/10_S1_4AYB Only) or 15mm porthole for all other models, 4clip models = 15mm ID clip connection.

Marking:

DANFOSS logo, model code, date of manufacture (YYYY/WW), PN and other technical data laser engraved into the body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

XB05M-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2CU_25/25_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4AYB, XB05X-1-xx-2CU_25/25_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-xx-2STS_10/10_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-20-2CU_25/25_S1_4Clip, XB05X-1-20-2STS_10/10_S1_4Clip, XB05H-1-xx-2CU_25/25_S1_4Clip, XB05H-1-xx-2STS_10/10_S1_4Clip. XB05 - frame size (XB05 = 312 mm x 76 mm) M, X, H - heatplate corrugation (different dimple design) - 1 - one pass heat exchanger (all XB05 range is one pass) “xx” = number of plates from 8 to 70. HP material = always 2; meaning material of heatplate which is always 1.4404. Brazing material = Stainless steel brazed = StS, Copper brazed = Cu. Pressure = approved pressure for primary and secondary channels (for XB05 is 25 bar when copper brazed and 10 bar when stainless steel brazed visible from application list in 202_f2). Connection configuration = position of connections (on XB05 only S1 applies). Connection type = G3/4 threaded ¾ connections AYB -no connections. Clip - tailormade solder and / or clip connections; usually tailormade for specific customer.

Product Images

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Range of ultrasonic water meters models U-WR have brass bodies and models U-WR2 have plastic bodies. The inlets incorporate a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50⁰C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Manufacturers logo and barcode, size and technical data laser etched under digital display cover of the plastic bodied U-WR2 models and on the top of the body and display cover of the brass bodied U-WR models. Flow arrow on the plastic case of both models

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

U-WR (brass bodied) - DN15 / ¾" (M), DN20 / 1" (M). U-WR2 (plastic bodied) - DN15 / ¾" (M), DN20 / 1" (M), DN25 / 1 1/4’’ (M). Models added December 2024: U-WR2 (plastic bodied with pressure sensor) - DN15 / ¾" (M), DN20 / 1" (M), DN25 / 1 1/4’’ (M).

Approval Holder:

Viewshine Metering Ltd.

Company Name

Viewshine Metering Ltd.

Address

Building 6, Moganshan Road 1418-41 Hangzhou Zhejiang Province

Country

China

Phone

15267464630

General Email

xiongdong@viewshine.cn

View All Listings by this Company

Range of water meters with cast iron bodies (blue epoxy coating) and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 (200mm) & DN150 (500mm)

Marking:

SENSUS on cover. Cordonel, DN, Max pressure and other technical information on meter face. Size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

GN Q3 40 – Cordonel DN50 (200mm) GN Q3 400 – Cordonel DN150 (500mm)

Approval Holder:

Sensus UK Systems Ltd

Company Name

Sensus UK Systems Ltd

Address

North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU

Country

Basingstoke

View All Listings by this Company

Manufacturer:

Sensus GmbH Hannover

Company Name

Sensus GmbH Hannover

Address

Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperatures Sizes DN15-25 models: 50°C, sizes DN32-40 models: 85°C.

Section:

1505 Water Meters

Size:

See model.

Marking:

GAER and product info on dial. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

GMS DN15 GAER: ¾” BSP (M), GMS DN20 GAER: 1” BSP (M), GMS DN25 GAER: 1¼” BSP (M). GMS DN32 GAER: 1½” BSP (M), GMS DN40 GAER: 2” BSP (M).

Approval Holder:

Hidroglobal Tecnologia del Agua S.A.

Company Name

Hidroglobal Tecnologia del Agua S.A.

Address

C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS

Postcode

08150

Country

Spain

Phone

+34 93 573 74 00

General Email

acalderon@regaber.com

View All Listings by this Company

Range of in-line water meters with either a brass or plastic composite body. The product incorporates a plastic strainer on the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

DIEHL metering, model code and product information on dial face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Aries 15/110 Composite Body ¾” BSP (M) Aries 15/110 Brass Body ¾” BSP (M) Aries 20/130 Brass Body 1” BSP (M)

Product Images

Approval Holder:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Manufacturer:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Range of in-line water meters with brass bodies. The inlets incorporate a plastic filter. The outlets incorporate a non-return valve (not intended for or suitable for backflow protection). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M), 1” BSP (M) & 1¼” BSP (M)

Marking:

Shenzhen Kaifa logo, date of manufacture (YYYY), model & technical info on meter face.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

MA408K

Product Images

Approval Holder:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company

Manufacturer:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

CIM & Made in Italy on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

CIM 1450 – Water Hammer shock absorber

Approval Holder:

Cimberio S.p.A

Company Name

Cimberio S.p.A

Address

Via Torchio, 57 San Maurizio d’Opaglio

Postcode

28017

Country

Italy

Phone

+39.0322.923001

General Email

tguidetti@cimberio.it

View All Listings by this Company

‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only. ‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240707001

Note:

Approval doesn’t include pressure vessels.

Size:

Small Booster Sets Systems with 2 to 3 Pumps = 2” BSP (M), Systems with 4 to 6 pumps = 2½” BSP (M). Medium Booster Sets Systems with CRI(E)10 pumps: Systems with 2 to 3 pumps = 2½” BSP (M), Systems with 4 to 5 pumps = DN80 flanges, Systems with 6 pumps = DN100 flanges. Systems with CRI(E)15 and CRI(E)20 pumps: Systems with 2 pumps = DN80 flanges, Systems with 3 to 4 pumps = DN100 flanges, Systems with 5 to 6 pumps = DN150 flanges. Sizes added November 2024: Large Booster Sets Systems with CR(E)32 pumps: Systems with 2 pumps = DN100 flanges, Systems with 3 to 6 pumps = DN150 flanges. Systems with CR(E)45 and CR(E)64 pumps: Systems with 2 pumps = DN150 flanges, Systems with 3 to 6 pumps = DN200 flanges.

Marking:

Grundfos logo, model, serial number, P/N, manufacturing country and technical information on adhesive label on base frame.

Installation Requirements:

R001 R008 R415

Expiry date:

31/07/2029

Model:

Small Booster Sets (PN16): HYDRO MPC-E “X” CRIE3, HYDRO MPC-E “X” CRIE5, HYDRO MPC-F “X” CRI3, HYDRO MPC-F “X” CRI5, HYDRO MPC-S “X” CRI3, HYDRO MPC-S “X” CRI5. Medium Booster Sets (PN16): HYDRO MPC-E “X” CRIE10, HYDRO MPC-E “X” CRIE15, HYDRO MPC-E “X” CRIE20, HYDRO MPC-F “X” CRI10, HYDRO MPC-F “X” CRI15, HYDRO MPC-F “X” CRI20, HYDRO MPC-S “X” CRI10, HYDRO MPC-S “X” CRI15, HYDRO MPC-S “X” CRI20. Models added November 2024: Large Booster Sets (PN16): HYDRO MPC-E “X” CRE32, HYDRO MPC-E “X” CRE45, HYDRO MPC-E “X” CRE64, HYDRO MPC-F “X” CR32, HYDRO MPC-F “X” CR45, HYDRO MPC-F “X” CR64, HYDRO MPC-S “X” CR32, HYDRO MPC-S “X” CR45, HYDRO MPC-S “X” CR64. The “X” preceding CR indicates the number of pumps in the booster set, between 2 and 6 pumps. The number following the pump type designation (e.g.: 32, 45 and 64) indicates the flow rate of the pump in m³/h. Full code example: Hydro MPC-E 2 CRE32-2-U2D-A-A-GHJ Where: Hydro MPC = Product name. -E = System type; All pumps with E-motor or CUE, and can also be -F for Fixed-speed pumps, 1 CUE or -S for Fixed-speed pumps. 2 = Number of pumps, this can be any number between 2 and 6. CRE = Pump type, can also be pumps beginning CR, CRI or CRIE. 3, 5, 10, 15, 20, 32, 45, 64 = flow rate of the pump in m³/h. U2 = Voltage, can also be U1, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD or UX. D = Design, can also be A, B, C, E, F, G, H, I or W. -A = Starting method; E (speed control). -A = Material combination; Stainless steel manifold, base frame and standard valves. -HJ = Options;, H - Dry-running protection, J - Redundant sensor.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower handsets with plastic bodies in various finishes (see models).

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301102

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Bristan on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

HS1002

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower outlets with matte black finishes, consisting of a shower hose, handset, riser rail and a brass wall mounted inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205915

Note:

Open outlet use only.

Size:

1/2" BSP (M)

Marking:

Bristan on shower handset.

Installation Requirements:

R040

Expiry date:

31/05/2027

Model:

RP3 SQR KIT01 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of overhead shower outlets, (chrome plated) ABS material incorporating a swivel connection, incorporates a stainless-steel strainer with an EPDM gasket. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207916

Size:

½” (F)

Marking:

Bristan on rosette

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

RP3 FHC ABRD01 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower kits, comprising of an overhead shower incorporating a stainless-steel strainer washer and riser rail assembly.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309935

Note:

STC16 STA16

Size:

15mm compression.

Marking:

HERITAGE on shower head.

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

RP3 STC16

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of overhead shower outlets, (stainless steel bodies – various finishes). The inlet incorporates a stainless-steel strainer washer.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2311921

Note:

Open outlet use only.

Size:

1/2" BSP (F)

Marking:

Bristan on shower face

Installation Requirements:

R001 R040

Expiry date:

30/11/2028

Model:

RP3 FH SLSQ01 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Overhead ceiling or wall mounted (depending on shower arm) shower outlet with chrome plated plastic body, EPDM o-rings and a plastic flow restrictor at the ball joint. Maximum working pressure: Open outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

23113748

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) – inlet to shower arm. ½” BSP (M) – inlet to showerhead.

Marking:

Grohe logo on shower outlet.

Installation Requirements:

R001 R010

Expiry date:

30/11/2028

Model:

26.054 Rainshower Allure 230. The showerhead can be installed together with either of the following shower arms: 27.709 Rainshower Grohe shower arm (wall), 27.711 Rainshower Grohe shower arm (ceiling).

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of overhead shower outlets, (brass bodies - various finishes. The inlets incorporate combined EPDM washers and stainless-steel strainers. Open outlet use only Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240902003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Model 27 607 xx0 is supplied with a shower arm Model 27 620 xx0 is supplied with a ceiling connector

Size:

1/2" BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

27 607 xx0 27 620 xx0 27 623 xx0 Models added February 2025: 27 624 xx0 & 28 821 xx0. Models added September 2025: 33 291 7xx & 32 291 7xx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of in-line `Y` patterned strainers with brass bodies and stainless steel filters. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

BSP (F) - 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4".

Marking:

Double-Lin logo, PN & flow arrow moulded on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

BYTS015 BYTSW020 BYTSW025 BYTSW032 BYTSW040 BYTSW050

Approval Holder:

Plumbing & Heating Distribution Ltd. (PHD Ltd.)

Company Name

Plumbing & Heating Distribution Ltd. (PHD Ltd.)

Address

Piksa House, 2 Penrod Way, Heysham, Lancashire

Postcode

LA3 2UZ

View All Listings by this Company

Manufacturer:

Zhejiang Double-Lin Valves Co. Ltd.

Company Name

Zhejiang Double-Lin Valves Co. Ltd.

Address

Yanpan Hardware Industrial Area, Ganjiang Town, Yuhuan

Country

China

Phone

+86-576-89915157

View All Listings by this Company

Range of `Y` patterned in-line strainers with black epoxy coated cast iron bodies and stainless-steel screens. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN65, DN80, DN100, DN125 & DN150 Flanged

Marking:

Crane logo, pressure and max temp on dataplate on body. Crane logo, date of manufacture (YYYY), size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

FM 276W

Product Images

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of pillar taps (chromium plated or matte black brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2204919

Size:

1/2" BSP (M) OR 3/4" BSP (M)

Marking:

Bristan on tap body

Installation Requirements:

R001 R006

Expiry date:

30/04/2027

Model:

RP3 MI ½ C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of pillar taps (chromium plated or matte black brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2204920

Size:

1/2" BSP (M) OR 3/4" BSP (M)

Marking:

Bristan on tap body

Installation Requirements:

R001 R006

Expiry date:

30/04/2027

Model:

RP3 MI ¾ C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240703015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) ¾” BSP (M)

Marking:

‘INFINITA’ on tap body

Installation Requirements:

R001 R006

Expiry date:

31/07/2029

Model:

INF-LGS-002 INF-LGS-003

Approval Holder:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Range of pillar taps (chrome plated brass) incorporating quarter turn ceramic disc headworks with cross-top operating members. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2206915

Size:

½” BSP (M)

Marking:

Bristan on indice.

Installation Requirements:

R001 R006

Expiry date:

30/06/2027

Model:

RP3 K 1/2 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with cross top operating members. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2305924

Size:

1/2" BSP (M)

Marking:

Heritage Bathrooms on indice.

Installation Requirements:

R001 R006

Expiry date:

31/05/2028

Model:

RP3 THRC00

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with cross top operating members. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2305925

Size:

3/4" BSP (M)

Marking:

Heritage Bathrooms on Indice.

Installation Requirements:

R001 R005

Expiry date:

31/05/2028

Model:

RP3 THRC01

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of pillar taps, (brass bodies – various finishes), incorporating a quarter turn ceramic disc headwork with a cross top operating member. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240902005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assembly incorporating a 3/8" BSP (F) captive nut end connection.

Marking:

Dornbracht logo on body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2029

Model:

17500809

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Self-closing, wall mounted bib tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlet incorporates a plastic aerator with integral flow regulator or optional flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240902016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Armitage Shanks on operating member

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

S7241AA Avon 21

Product Images

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Country

Staffordshire,

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602065

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Dolphin logo on end connections

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Model Code: Dolphin Blue DB30abb.ccc.d.eee a’ indentifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: o DB303bb. for brass material o DB304bb. for stainless steel material  ‘bb’ identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a11. Can be either one or two digits.  ‘ccc’ identifies the length range of the metal interlocked hose from 500mm ‘DB30abb.050’ to 2000mm ‘DB30abb.200’  ‘d’ identifies the external finish to the metal parts from ‘DB30abb.ccc.1 to DB30ab.ccc.9’: o ‘.1’ denotes brushed/satin polished o ‘.2’ denotes mirror polished o ‘.3’ denotes brushed/satin polished with PVD coating o ‘.4’ denotes mirror polished with PVD coating o ‘.5’ denotes powder coated o ‘.6 - .9’ to denote other material and finish options that may be available in the future  ‘eee’ indicates the colour of PVD or powder coat that has been applied from ‘DB30abb.ccc.d.00’ to ‘DB30abb.ccc.d.999’. Can be either two or three digits.

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

SHS on end connections.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Stainless steel interlocked (chrome plated) silicone lined kitchen tap pull-out hose. Open outlet use only. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240902006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

M12 x M12.

Marking:

Dornbracht on ferule.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

04300212000

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of stainless-steel expansion joints with flanged or threaded end connections. For maximum working pressure please refer to model. Maximum operating temperature 100°C.

Section:

1870 Tubes

Section Subtitle:

Flexible - Metal.

WRAS Approval Number:

240704052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Model number

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Threaded connections: Maximum working pressure 16.0 bar: JP20BS, JP20HS, JP250BS, JP250HS: ½", ¾”, 1”, 1¼”, 1½”, 2”, 2½” & 3” BSP (M). Flanged connections: Maximum working pressure 16.0 bar: JP251FS & JP251VS:15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm & 100mm. Maximum working pressure 14.0 bar. JP251FS & JP251VS:125mm. Maximum working pressure 8.0 bar: JP251FS & JP251VS: 200mm. Maximum working pressure 10.0 bar JP251FS & JP251VS: 150mm.

Approval Holder:

Stourflex Ltd

Company Name

Stourflex Ltd

Address

Junction Road Audnam Stourbridge

Postcode

DY8 4YH

Country

United Kingdom

Phone

+441384 393 329

General Email

james.croydon@stourflex.co.uk

View All Listings by this Company

Ultraflow ranges of Direct, Indirect, Solar Single, Solar Twin, Slim Direct and Slim Indirect stainless steel insulated unvented hot water storage cylinders with external expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:

1890 Unvented Heating Apparatus

WRAS Approval Number:

2103041

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.

Size:

22mm compression (Inlet Manifold)

Marking:

Ultraflow on front, technical information on adhesive label on body.

Installation Requirements:

R001 R140 R360

Expiry date:

31/03/2026

Proviso:

All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°c and 45°c.

Model:

UD90 - ULTRAFLOW 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD120 - ULTRAFLOW 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UD150 – ULTRAFLOW 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD170 – ULTRAFLOW 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UD200 – ULTRAFLOW 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD250 – ULTRAFLOW 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD300 – ULTRAFLOW 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UI90-ULTRAFLOW 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI120 - ULTRAFLOW 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI150 - ULTRAFLOW 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI170 - ULTRAFLOW 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI200 - ULTRAFLOW 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI250 - ULTRAFLOW 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI300 - ULTRAFLOW 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UWD170 -ULTRAFLOW 170 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWD200 -ULTRAFLOW 200 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWD250 -ULTRAFLOW 250 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWD300 -ULTRAFLOW 300 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWI170 ULTRAFLOW 170 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UWI200 ULTRAFLOW 200 NDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UWI250 ULTRAFLOW 250 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UWI300 ULTRAFLOW 300 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UDS60-ULTRAFLOW SLIM 60 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UDS90-ULTRAFLOW SLIM 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS120-ULTRAFLOW SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS150D-ULTRAFLOW SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS170D-ULTRAFLOW SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS200D-ULTRAFLOW SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UIS60-ULTRAFLOW SLIM 60 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS90-ULTRAFLOW SLIM 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS120-ULTRAFLOW SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS150-ULTRAFLOW SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS170-ULTRAFLOW SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS200-ULTRAFLOW SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:

L & M (HEATING) SUPPLIES LTD.

Company Name

L & M (HEATING) SUPPLIES LTD.

Address

103 LOCKFIELD AVENUE ENFIELD, ENFIELD, MIDDLESEX

Postcode

EN3 7PY

View All Listings by this Company

Range of Ultraflow Air bubble top indirect and direct single coil unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 10.0 bar@90˚C. A safety kit (manifold) consisting of a single check valve assembly, verified by test (suitable for backflow prevention against fluid category 2), strainer, an expansion relief valve set at 8.0 bar and a pressure reducing valve set at 3.0 bar and a tundish is also provided. Alternative inlet control group and temperature and pressure relief valve added January 2023. Maximum working pressure: Secondary circuit: 7.5 bar. Primary circuit: 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1890 Unvented Heating Apparatus

Size:

Secondary circuit: 22mm compression. Primary circuit: 22mm compression. Return circuit: 22mm compression.

Marking:

Ultraflow Air on label on front of body.

Installation Requirements:

R001 R140 R360

Expiry date:

31/01/2027

Model:

UOD120 – ULTRAFLOW AIR 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD150 – ULTRAFLOW AIR 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD170 – ULTRAFLOW AIR 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD200 – ULTRAFLOW AIR 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD250 – ULTRAFLOWAIR 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD300 – ULTRAFLOW AIR 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI120 – ULTRAFLOW AIR 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI150 – ULTRAFLOW AIR 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI170 – ULTRAFLOW AIR 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI200 – ULTRAFLOW AIR 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI250 – ULTRAFLOW AIR 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI300 - ULTRAFLOW AIR 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS120-ULTRAFLOW AIR SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS150-ULTRAFLOW AIR SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS170-ULTRAFLOW AIR SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS200-ULTRAFLOW AIR SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOIS120-ULTRAFLOW AIR SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS150-ULTRAFLOW AIR SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS170-ULTRAFLOW AIR SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS200-ULTRAFLOW AIR SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:

L & M (HEATING) SUPPLIES LTD.

Company Name

L & M (HEATING) SUPPLIES LTD.

Address

103 LOCKFIELD AVENUE ENFIELD, ENFIELD, MIDDLESEX

Postcode

EN3 7PY

View All Listings by this Company

Range of manually operated flow control valves with (brass bodies - various finishes), incorporating either a non-rising spindle headwork or (quarter turn ceramic disc headwork model 16 973 180 only) with cross top, lever or dome type operating members. Maximum working pressure; 10Bar Maximum operating temperature 70°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

240402064

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) ¾” BSP (F)

Marking:

Axor on face plate, Hansgrohe, model on label under face plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2029

Model:

Trim sets: 10 970 xx0 10 972 xx0 11 960 xx0 12 771 xx0 16 871 xx0 16 872 xx0 34 960 xx0 36 771 xx0 38 976 xx0 39 960 xx0 39 965 xx0 46 770 xx0 46 771 xx0 Trim sets to be used in combination with the following basic sets: 15 970 180 – ¾” BSP (F) 15 973 180 – ½” BSP (F) 15 974 180 – ½” BSP (F) 16 970 180 – ¾” BSP (F) 16 973 180 – ½” BSP (F) 16 974 180 – ½” BSP (F) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted, thermostatic bar shower mixers (brass bodies – various finishes), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Models 801524.001 & 801540.001 incorporate a half turn ceramic disc headwork that diverts the flow to an overhead shower or shower handset. Both inlets incorporate an approved check valve cartridge and stainless steel strainers however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models 801508.001 & 801508.002. Maximum working pressure 10 bar. Maximum operating temperature 65 C. Model 801509.001. Maximum working pressure 10 bar. Maximum operating temperature 60 C. Model 801524.001. Maximum working pressure 5 bar. Maximum operating temperature 60 C. Model 801540.001. Maximum working pressure 5 bar. Maximum operating temperature 65 C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240888001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Models 801524.001 & 801540.001 are supplied with an overhead shower, shower hose & handset. Models 801508.001, 801508.002 & 801509.001 are supplied with a shower hose and handset.

Size:

½”x ¾” BSP (M) offset unions 15mm compression

Marking:

PPI on rear of valves,

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2029

Model:

801508.001 801508.002 801509.001 801524.001 801540.001

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturer:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Wall mounted, exposed shower valve which has a brass body, available in different finishes. Flow is controlled by a quarter turn ceramic disc headwork with dome operating member and temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporate a single check valve cartridge however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240788007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Ideal Standard logo on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2029

Model:

BD578XX Ceratherm ALU+ Exposed Thermostatic Mixer Valve. ‘XX’ denotes finish and is replaced with: RO (Rose), SI (Silver) and XG (Matt Black).

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Wall mounted thermostatic shower valve (chrome plated brass), incorporating a non-rising spindle headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2205914

Size:

15mm Compression

Marking:

Bristan on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2027

Model:

RP3 SHDCB02

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of exposed wall mounted thermostatic shower valves, (chrome plated brass bodies). Both inlets incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2207917

Size:

15mm Compression

Marking:

Heritage (Brand of Bristan) on indice.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2027

Model:

RP3 SHDCT02

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of wall mounted thermostatic bar shower mixers, (chrome plated brass bodies), incorporating a ceramic disc diverter cartridge controlling the flow with a dome type operating member. The temperature is controlled independently with a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless steel strainer washers, approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection and screwdriver operated isolation valves. The products are supplied with a shower hose, handset, riser rail assembly and an overhead shower outlet. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2306924

Size:

15mm compression.

Marking:

Bristan on body

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2028

Model:

RP3 BZ SHXDVCTFF C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company