Range of stainless steel (SS316L) pressfit fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207398

Size:

15-108mm. ½” BSP (M) or (F) - 4” BSP (M) or (F) (see model - some incorporate a captive nut).

Marking:

Brymec and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Coupler OD15 29439 OD22 29440 OD28 29441 OD35 29442 OD42 29443 OD54 29444 OD76.1 29445 OD88.9 29446 OD108 29447 Slip coupling OD15 29448 OD22 29449 OD28 29450 OD35 29451 OD42 29452 OD54 29453 OD76.1 29454 OD88.9 29455 OD108 29456 Fitting Reducer OD22xOD15 29459 OD28xOD15 29460 OD28xOD22 29461 OD35xOD22 29462 OD35xOD28 29463 OD42xOD22 29464 OD42xOD28 29465 OD42xOD35 29466 OD54xOD28 29467 OD54xOD35, 29468 OD54xOD42 29469 OD76.1xOD54 29470 OD88.9xOD54 29471 OD88.9xOD76.1 29472 OD108xOD54 29473 OD108xOD76.1 29474 OD108xOD88.9 29475 F x F 90° Bend OD15 29317 OD22 29318 OD28 29319 OD35 29320 OD42 29321 OD54 29322 OD76.1 29323 OD88.9 23924 OD108 29325 M x F 90° Bend OD15 29308 OD22 29309 OD28 29310 OD35 29311 OD42 29312 OD54 29313 OD76.1 29314 OD88.9 29315 OD108 29316 F X F 45° Bend OD15 29346 OD22 29347 OD28 29348 OD35 29349 OD42 29350 OD54 23951 OD76.1 29353 OD88.9 29354 OD108 29355 M x F 45° Bend OD15 29336 OD22 29337 OD28 29338 OD35 29339 OD42 29340 OD54 29341 OD76.1 29343 OD88.9 29344 OD108 29345 Full Crossover OD15 29356 OD22 29357 OD28 29358 Equal Tee OD15 29376 OD22 29377 OD28 29378 OD35 29379 OD42 29380 OD54 29381 OD76.1 29382 OD88.9 29383 OD108 29384 Reducing Tee OD22xOD15 29385 OD22xOD15 29386 OD28xOD15 29387 OD28xOD22 29389 OD35xOD15 29390 OD35xOD22 29391 OD35xOD28 29392 OD42xOD22 29393 OD42xOD28 29394 OD42xOD35 29395 OD54xOD22 29396 OD54xOD28 29397 OD54xOD35 29398 OD54xOD42 29399 OD76.1xOD22 29400 OD76.1xOD28 29401 OD76.1xOD35 29402 OD76.1xOD42 29403 OD76.1xOD54 29404 OD88.9xOD22 29405 OD88.9xOD28 29406 OD88.9xOD35 29407 OD88.9xOD42 29408 OD88.9xOD54 29409 D88.9xOD76.1 29410 OD108xOD22 29411 OD108xOD28 29412 OD108xOD35 29413 OD108xOD42 29414 OD108xOD54 29415 OD108xOD76.1 29416 OD108xOD88.9 29417 Female Branch Tee OD15xRp 1/2 29418 OD22xRp 1/2 29419 OD22xRp 3/4 29420 OD28xRp 3/4 29421 OD28xRp 1/2 29422 OD28xRp 1 29423 OD35xRp 1/2 29424 OD35xRp 3/4 29425 OD35xRp1 1/4 29426 OD42xRp 1/2 29427 OD42xRp 3/4 29428 OD42xRp1 1/2 29429 OD54xRp 1/2 29430 OD54xRp 3/4 29431 OD54xRp 2 29432 OD76.1xRp 3/4 29433 OD76.1xRp 2 29434 OD88.9xRp 3/4 29435 OD88.9xRp 2 29436 OD108xRp 3/4 29437 OD108xRp 2 29438 Male 90° Elbow OD15xR 1/2 29370 OD22xR 3/4 29371 OD28xR 1 29372 OD35xR 1 1/4 29373 OD42xR 1 1/2 29374 OD54xR 2 29375 Female 90° Elbow OD15xRp 1/2 29362 OD22xRp 3/4 29363 OD28xRp 1 29366 OD35xRp 1 ¼ 29369 Female Backplate Elbow OD15xRp 1/2 29531 OD22xRp 3/4 29532 Male Adaptor OD15xR 1/2 29477 OD15xR 3/4 29478 OD22xR 1/2 29479 OD22xR 3/4 29480 OD22xR 1 29481 OD28xR 3/4 29482 OD28xR 1 29483 OD35xR1 29484 OD35xR 1 1/4 29485 OD42xR 1 1/2 29486 OD54xR 2 29487 OD76.1xR 2 1/2 29488 OD88.9xR 3 29489 OD108xR4 29490 Female Adaptor OD15xRp 1/2 29491 OD15xRp 3/4 29492 OD22xRp 1/2 29493 OD22xRp 3/4 29494 OD22xRp 1 29495 OD28xRp 3/4 29496 OD28xRp 1 29497 OD35xRp 1 1/4 29498 OD42xRp 1 1/2 29499 OD54xRp 2 29500 Plug-In Male Adaptor OD15xR1/2 29259 OD22xR 1/2 29260 OD22xR 3/4 29261 OD28xR 1 29262 Plug-In Female Adaptor OD15xRp 1/2 29245 OD22xRp 1/2 29245 OD22xRp 3/4 29247 OD28xR 3/4 29248 End Cap OD15 29533 OD22 29534 OD28 29535 OD35 29536 OD42 29537 OD54 29538 Male Union Flat Sealing OD15xR 1/2 29523 OD15xR 3/4 29524 OD22xR 3/4 29525 OD28xR 1 29526 OD35xR 1 1/4 29527 OD42xR 1 1/2 29528 OD54xR 2 29529 Female Union Flat Sealing OD15xRp 1/2 29514 OD15xRp 3/4 29515 OD22xRp 3/4 29516 OD22xRp 1 29517 OD28xRp 1 29519 OD35xRp 1 1/4 29520 OD42xRp 1 1/2 29521 OD54xRp 2 29522 Union Flat Sealing OD15 29508 OD22 29509 OD28 29510 OD35 29511 OD42 29512 OD54 29513

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902084

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Brymec and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

27800 15mm Copper-Press 90° M/F Bend 27801 22mm Copper-Press 90° M/F Bend 27802 28mm Copper-Press 90° M/F Bend 27803 35mm Copper-Press 90° M/F Bend 27804 42mm Copper-Press 90° M/F Bend 27805 54mm Copper-Press 90° M/F Bend 27806 67mm Copper-Press 90° M/F Bend 27807 76mm Copper-Press 90° M/F Bend 27809 108mm Copper-Press 90° M/F Bend 27810 15mm Copper-Press 90° F/F Bend 27811 22mm Copper-Press 90° F/F Bend 27812 28mm Copper-Press 90° F/F Bend 27813 35mm Copper-Press 90° F/F Bend 27814 42mm Copper-Press 90° F/F Bend 27815 54mm Copper-Press 90° F/F Bend 27816 67mm Copper-Press 90° F/F Bend 27817 76mm Copper-Press 90° F/F Bend 27819 108mm Copper-Press 90° F/F Bend 27820 15mm Copper-Press 45° M/F Bend 27821 22mm Copper-Press 45° M/F Bend 27822 28mm Copper-Press 45° M/F Bend 27823 35mm Copper-Press 45° M/F Bend 27824 42mm Copper-Press 45° M/F Bend 27825 54mm Copper-Press 45° M/F Bend 27826 67mm Copper-Press 45° M/F Bend 27827 76mm Copper-Press 45° M/F Bend 27829 109mm Copper-Press 45° M/F Bend 27830 15mm Copper-Press 45° F/F Bend 27831 22mm Copper-Press 45° F/F Bend 27832 28mm Copper-Press 45° F/F Bend 27833 65mm Copper-Press 45° F/F Bend 27834 42mm Copper-Press 45° F/F Bend 27835 54mm Copper-Press 45° F/F Bend 27836 67mm Copper-Press 45° F/F Bend 27837 76mm Copper-Press 45° F/F Bend 27839 108mm Copper-Press 45° F/F Bend 27840 15mm Copper-Press Full Crossover 27841 22mm Copper-Press Full Crossover 27845 15mm Copper-Press Partial Crossover 27846 22mm Copper-Press Partial Crossover 27850 15mm Copper-Press Equal Tee 27851 22mm Copper-Press Equal Tee 27852 28mm Copper-Press Equal Tee 27853 35mm Copper-Press Equal Tee 27854 42mm Copper-Press Equal Tee 27855 54mm Copper-Press Equal Tee 27856 67mm Copper-Press Equal Tee 27857 76mm Copper-Press Equal Tee 27859 108mm Copper-Press Equal Tee 27860 15 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27861 22 x 15 x 15mm Copper-Press Reducing Tee ExBxE 27862 22 x 15 x 22 mm Copper-Press Reducing Tee ExBxE 27863 22 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27865 28 x 15 x 22mm Copper-Press Reducing Tee ExBxE 27866 28 x 15 x 28mm Copper-Press Reducing Tee ExBxE 27867 28 x 22 x 22mm Copper-Press Reducing Tee ExBxE 27868 28 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27869 28 x 28 x 15mm Copper-Press Reducing Tee ExBxE 27870 28 x 28 x 22mm Copper-Press Reducing Tee ExBxE 27872 35 x 15 x 35mm Copper-Press Reducing Tee ExBxE 27874 35 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27875 35 x 22 x 35mm Copper-Press Reducing Tee ExBxE 27876 35 x 28 x 28mm Copper-Press Reducing Tee ExBxE 27877 35 x 28 x 35mm Copper-Press Reducing Tee ExBxE 27880 42 x 15 x 42mm Copper-Press Reducing Tee ExBxE 27881 42 x 22 x 42mm Copper-Press Reducing Tee ExBxE 27882 42 x 28 x 42mm Copper-Press Reducing Tee ExBxE 27884 42 x 35 x 42mm Copper-Press Reducing Tee ExBxE 27885 54 x 22 x 54mm Copper-Press Reducing Tee ExBxE 27886 54 x 28 x 54mm Copper-Press Reducing Tee ExBxE 27887 54 x 35 x 54mm Copper-Press Reducing Tee ExBxE 27888 54 x 42 x 54mm Copper-Press Reducing Tee ExBxE 27889 67 x 54 x 67mm Copper-Press Reducing Tee ExBxE 27890 76 x 54 x 76mm Copper-Press Reducing Tee ExBxE 27893 108 x 54 x 108mm Copper-Press Reducing Tee ExBxE 27896 42 x 42 x 35mm Copper-Press Reducing Tee ExBxE 27900 22 x 15mm Copper-Press Reducing Coupling 27901 28 x 15mm Copper-Press Reducing Coupling 27902 28 x 22 mm Copper-Press Reducing Coupling 27903 35 x 22mm Copper-Press Reducing Coupling 27904 35 x 28mm Copper-Press Reducing Coupling 27905 42 x 22mm Copper-Press Reducing Coupling 27906 42 x 28mm Copper-Press Reducing Coupling 27907 42 x 35mm Copper-Press Reducing Coupling 27908 54 x 28mm Copper-Press Reducing Coupling 27909 54 x 35mm Copper-Press Reducing Coupling 27910 54 x 42mm Copper-Press Reducing Coupling 27915 22 x 15mm Copper-Press Reducer 27916 28 x 15mm Copper-Press Reducer 27917 28 x 22mm Copper-Press Reducer 27918 35 x 22mm Copper-Press Reducer 27919 35 x 28mm Copper-Press Reducer 27920 42 x 22mm Copper-Press Reducer 27921 42 x 28mm Copper-Press Reducer 27922 42 x 35mm Copper-Press Reducer 27923 54 x 35mm Copper-Press Reducer 27924 54 x 42mm Copper-Press Reducer 27925 67 x 54mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 27926 76 x 54mm Copper-Press Reducer 27929 108 x54mm Copper-Press Reducer 27930 108 x76mm Copper-Press Reducer 27932 54 x 28mm Copper-Press Reducer 27940 15mm Copper-Press Coupling 27941 22mm Copper-Press Coupling 27942 28mm Copper-Press Coupling 27943 35mm Copper-Press Coupling 27944 42mm Copper-Press Coupling 27945 54mm Copper-Press Coupling 27946 67mm Copper-Press Coupling 27947 76mm Copper-Press Coupling 27949 108mm Copper-Press Coupling 27950 15mm Copper-Press Slip Coupling 27951 22mm Copper-Press Slip Coupling 27952 28mm Copper-Press Slip Coupling 27953 35mm Copper-Press Slip Coupling 27954 42mm Copper-Press Slip Coupling 27955 54mm Copper-Press Slip Coupling 27956 67mm Copper-Press Slip Coupling 27957 76mm Copper-Press Slip Coupling 27960 15mm Copper-Press End Cap 27961 22mm Copper-Press End Cap 27962 28mm Copper-Press End Cap 27963 35mm Copper-Press End Cap 27964 42mm Copper-Press End Cap 27965 54mm Copper-Press End Cap 27966 67mm Copper-Press End Cap 27967 76mm Copper-Press End Cap 28071 15mm x1/2" Copper-Press Female Iron 90° Elbow 28074 22mm x3/4" Copper-Press Female Iron 90° Elbow 28081 15mm x1/2" Copper-Press Male Iron 90° Elbow 28101 15mm x1/2" x 15mm Copper-Press Female Branch Reducing Tee 28102 22mm x1/2" x 22mm Copper-Press Female Branch Reducing Tee 28104 28mm x1/2" x 28mm Copper-Press Female Branch Reducing Tee 28106 35mm x1/2" x 35mm Copper-Press Female Branch Reducing Tee 28108 42mm x1/2" x 42mm Copper-Press Female Branch Reducing Tee 28110 54mm x1/2" x 54mm Copper-Press Female Branch Reducing Tee 28115 15mm x 3/8" Copper-Press Male Iron Adaptor 28116 15mm x 1/2" Copper-Press Male Iron Adaptor 28117 15mm x 3/4" Copper-Press Male Iron Adaptor 28118 22mm x 1/2" Copper-Press Male Iron Adaptor 28119 22mm x 3/4" Copper-Press Male Iron Adaptor 28120 22mm x 1" Copper-Press Male Iron Adaptor 28121 28mm x 3/4" Copper-Press Male Iron Adaptor 28122 28mm x 1" Copper-Press Male Iron Adaptor 28125 35mm x 1 1/4" Copper-Press Male Iron Adaptor 28128 42mm x 1 1/2" Copper-Press Male Iron Adaptor 28130 54mm x 2" Copper-Press Male Iron Adaptor 28131 67mm x 2 1/2" Copper-Press Male Iron Adaptor 28133 76mm x 3" Copper-Press Male Iron Adaptor 28134 108mm x 4" Copper-Press Male Iron Adaptor 28141 15mm x 1/2" Copper-Press Plug-In Female Adapter 28142 22mm x 1/2" Copper-Press Plug-In Female Adapter 28143 22mm x 3/4" Copper-Press Plug-In Female Adapter 28145 28mm x 1" Copper-Press Plug-In Female Adapter 28148 54mm x 2" Copper-Press Plug-In Female Adapter 28149 35mm x 1" Copper-Press Plug-In Female Adapter 28151 15mm x 1/2" Copper-Press Female Iron Adaptor 28153 22mm x 1/2" Copper-Press Female Iron Adaptor 28154 22mm x 3/4" Copper-Press Female Iron Adaptor 28157 28mm x 1" Copper-Press Female Iron Adaptor 28160 35mm x 1 1/4" Copper-Press Female Iron Adaptor 28163 42mm x 1 1/2" Copper-Press Female Iron Adaptor 28165 54mm x 2" Copper-Press Female Iron Adaptor 28166 67mm x 2 1/2" Copper-Press Female Iron Adaptor 28169 76mm x 3" Copper-Press Female Iron Adaptor 28171 15mm x 1/2" Copper-Press Plug-In Male Adapter 28173 22mm x 3/4" Copper-Press Plug-In Male Adapter 28231 67 x 28mm Copper-Press Reducer 28232 67 x 35mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 28233 67 x 42mm Copper-Press Reducer 28236 76 x 67mm Copper-Press Reducer 28237 108 x42mm Copper-Press Reducer 28238 108 x42mm Copper-Press Reducer 28255 67 x 28 x 67mm Copper-Press Reducing Tee ExBxE 28260 76 x 35 x 76mm Copper-Press Reducing Tee ExBxE 27897 54 x 22 x 54mm Extended Spigot Manifold Tee 27898 54 x 28 x 54mm Extended Spigot Manifold Tee 27911 67mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27912 76mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27913 108mm x 3/4" 4 Port Copper‐Press Multiport Coupler 28190 15mm x 1/2" Copper Press Female Union 28192 22mm x 3/4" Copper Press Female Union 28195 28mm x 1" Copper Press Female Union 28196 35mm x 1 1/4" Copper Press Female Union 28197 42mm x 1 1/2" Copper Press Female Union 28198 54mm x 2" Copper Press Female Union 28200 15mm x 1/2" Copper Press Male Union 28203 22mm x 3/4" Copper Press Male Union 28206 28mm x 1" Copper Press Male Union 28207 35mm x 1 ¼ Copper Press Male Union 28208 42mm x 1 1/2" Copper Press Male Union 28209 54mm x 2" Copper Press Male Union 28225 15mm x1/2"Copper Press Female Backplate Elbow 28241 42mm Copper Press Flange (1 1/2" / DN40) 28242 54mm Copper Press Flange (2" / DN50) 28243 67mm Copper Press Flange (2 1/2" / DN65) 28244 76mm Copper Press Flange (3”/DN 80) 28246 108mm Copper Press Flange (4" / DN100)

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of copper end feed fittings for use with copper tube to EN 1057. For above and below ground use. Maximum working pressure: 6mm-54mm 16.0bar, 64mm-108mm 10.0bar. Maximum operating temperature 85°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250108002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Manufactures logo & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

5001: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5002: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm，64mm，67mm，76mm，89mm，108mm 5040: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5041: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5090: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5092: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5085: 12mm，14mm，15mm，16mm，18mm，22mm 5086: 12mm，14mm，15mm，16mm，18mm，22mm 5270: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5301: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，22mm，28mm，35mm，42mm， 45mm, 64mm，67mm，76mm，89mm，108mm 5240: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 15mm，20mm x 16mm，20mm x 18mm， 22mm x 10mm，22mm x 12mm，22mm x 14mm， 22mm x 15mm，22mm x 16mm，22mm x 18mm， 22mm x 20mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 16mm，32mm x 18mm， 32mm x 20mm，32mm x 22mm，32mm x 28mm， 35mm x 12mm，35mm x 15mm，35mm x 18mm， 35mm x 22mm，35mm x 28mm，36mm x 22mm， 36mm x 28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 36mm，42mm x 15mm，42mm x 18mm， 42mm x 22mm，42mm x 28mm，42mm x 32mm， 42mm x 35mm，42mm x 36mm，52mm x 32mm， 52mm x 36mm，52mm x 40mm，52mm x 42mm， 54mm x 15mm，54mm x 22mm，54mm x 28mm， 54mm x 35mm，54mm x 42mm，54mm x 52mm 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm, 108mm x 64mm, 108mm x 76mm，108mm x 89mm 5243: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 16mm，20mm x 18mm，22mm x 10mm， 22mm x 12mm，22mm x 14mm，22mm x 15mm， 22mm x 16mm，22mm x 18mm，22mm x 20mm， 25mm x 12mm，25mm x 14mm，25mm x 16mm， 25mm x 18mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 18mm，32mm x 20mm， 32mm x 22mm，32mm x 28mm，35mm x 12mm， 35mm x 15mm，35mm x 18mm，35mm x 22mm， 35mm x 28mm，36mm x 18mm，36mm x 22mm， 36mm x28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 35mm，40mm x 36mm，42mm x 15mm， 42mm x 18mm，42mm x 22mm，42mm x 28mm， 42mm x 32mm，42mm x 35mm，42mm x 36mm， 42mm x 40mm，52mm x 28mm，52mm x 32mm， 52mm x 35mm，52mm x 36mm，52mm x 40mm， 52mm x42mm，54mm x 15mm，54mm x 18mm， 54mm x 22mm，54mm x 28mm，54mm x 32mm， 54mm x 35mm，54mm x 36mm，54mm x 40mm， 54mm x 42mm，54mm x 52mm, 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm，108mm x 64mm， 108mm x 76mm，108mm x 89mm 5130: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5130R: 6mm x 8mm x 6mm，8mm x 6mm x 6mm ， 8mm x 6mm x 8mm，8mm x 10mm x 8mm， 10mm x 8mm x 6mm ， 10mm x 6mm x 10mm ， 10mm x 8mm x 8mm ， 10mm x 8mm x 10mm ，10mm x 10mm x 8mm ， 10mm x 12mm x 10mm ， 10mm x 15mm x 10mm ， 12mm x 8mm x 8mm ， 12mm x 8mm x 10mm ， 12mm x 8mm x 12mm ， 12mm x 10mm x 8mm ， 12mm x 10mm x 10mm ， 12mm x 10mm x 12mm ， 12mm x 12mm x 8mm ， 12mm x 12mm x 10mm，12mm x 14mm x 12mm， 12mm x 15mm x 12mm，12mm x 16mm x 12mm， 12mm x 18mm x 12mm，14mm x 10mm x 10mm， 14mm x 10mm x 12mm，14mm x 10mm x 14mm， 14mm x 12mm x 10mm，14mm x 12mm x 12mm， 14mm x 12mm x 14mm，14mm x 14mm x 10mm， 14mm x 14mm x 12mm，14mm x 16mm x 12mm， 14mm x 16mm x 14mm，14mm x 18mm x 12mm， 14mm x 18mm x 14mm，14mm x 22mm x 14mm， 15mm x 8mm x 10mm ， 15mm x 8mm x 12mm ， 15mm x 10mm x 10mm，15mm x 10mm x 12mm， 15mm x 12mm x 10mm，15mm x 12mm x 12mm， 15mm x 15mm x 10mm，15mm x 15mm x 12mm， 15mm x 18mm x 12mm，15mm x 18mm x 15mm， 15mm x 22mm x 15mm，15mm x 28mm x 15mm， 16mm x 10mm x 16mm，16mm x 12mm x 12mm， 16mm x 12mm x 14mm，16mm x 12mm x 16mm， 16mm x 14mm x 12mm，16mm x 14mm x 14mm， 16mm x 14mm x 16mm，16mm x 16mm x 10mm， 16mm x 16mm x 12mm，16mm x 16mm x 14mm， 16mm x 18mm x 14mm，16mm x 18mm x 16mm， 16mm x 20mm x 16mm，16mm x 22mm x 16mm， 18mm x 10mm x 10mm，18mm x 10mm x 12mm， 18mm x 10mm x 15mm，18mm x 10mm x 18mm， 18mm x 12mm x 12mm，18mm x 12mm x 14mm， 18mm x 12mm x 15mm，18mm x 12mm x 16mm， 18mm x 12mm x 18mm，18mm x 14mm x 12mm， 18mm x 14mm x 14mm，18mm x 14mm x 16mm， 18mm x 14mm x 18mm，18mm x 15mm x 12mm， 18mm x 15mm x 15mm，18mm x 15mm x 18mm， 18mm x 16mm x 12mm，18mm x 16mm x 14mm， 18mm x 16mm x 16mm，18mm x 16mm x 18mm， 18mm x 18mm x 10mm，18mm x 18mm x 12mm， 18mm x 18mm x 14mm，18mm x 18mm x 15mm， 18mm x 18mm x 16mm，18mm x 20mm x 18mm， 18mm x 22mm x 14mm，18mm x 22mm x 15mm， 18mm x 22mm x 18mm，18mm x 28mm x 18mm， 20mm x 12mm x 20mm，20mm x 14mm x 18mm， 20mm x 14mm x 20mm，20mm x 16mm x 16mm， 20mm x 16mm x 18mm，20mm x 16mm x 20mm， 20mm x 18mm x 16mm，20mm x 18mm x 18mm， 20mm x 18mm x 20mm，20mm x 20mm x 12mm， 20mm x 20mm x 14mm，20mm x 20mm x 16mm， 20mm x 20mm x 18mm，20mm x 22mm x 20mm， 22mm x 10mm x 22mm，22mm x 12mm x 12mm， 22mm x 12mm x 14mm，22mm x 12mm x 15mm， 22mm x 12mm x 18mm，22mm x 12mm x 22mm， 22mm x 14mm x 12mm，22mm x 14mm x 14mm， 22mm x 14mm x 15mm，22mm x 14mm x 16mm， 22mm x 14mm x 18mm，22mm x 14mm x 22mm， 22mm x 15mm x 12mm，22mm x 15mm x 15mm， 22mm x 15mm x 18mm，22mm x 15mm x 22mm， 22mm x 16mm x 14mm，22mm x 16mm x 16mm， 22mm x 16mm x 18mm，22mm x 16mm x 22mm， 22mm x 18mm x 12mm，22mm x 18mm x 14mm， 22mm x 18mm x 15mm，22mm x 18mm x 16mm， 22mm x 18mm x 18mm，22mm x 18mm x 22mm， 22mm x 20mm x 22mm ，22mm x 22mm x10mm ， 22mm x 22mm x 12mm，22mm x 22mm x 14mm， 22mm x 22mm x 15mm，22mm x 22mm x 16mm， 22mm x 22mm x 18mm，22mm x 22mm x 20mm， 22mm x 28mm x 15mm，22mm x 28mm x 22mm， 22mm x 35mm x 22mm，28mm x 10mm x 28mm， 28mm x 12mm x 12mm，28mm x 12mm x 15mm， 28mm x 12mm x 18mm ，28mm x 12mm x22mm ， 28mm x 12mm x 28mm，28mm x 14mm x 18mm， 28mm x 14mm x 28mm，28mm x 15mm x 12mm， 28mm x 15mm x 15mm，28mm x 15mm x 18mm， 28mm x 15mm x 22mm，28mm x 15mm x 28mm， 28mm x 16mm x 15mm，28mm x 16mm x 16mm， 28mm x 16mm x 18mm，28mm x 16mm x 22mm， 28mm x 16mm x 28mm，28mm x 18mm x 12mm， 28mm x 18mm x 15mm，28mm x 18mm x 16mm， 28mm x 18mm x 18mm，28mm x 18mm x 22mm， 28mm x 18mm x 28mm，28mm x 20mm x 20mm， 28mm x 20mm x 28mm，28mm x 22mm x 12mm， 28mm x 22mm x 15mm，28mm x 22mm x 16mm， 28mm x 22mm x 18mm，28mm x 22mm x 22mm， 28mm x 22mm x 28mm，28mm x 28mm x 12mm， 28mm x 28mm x 14mm，28mm x 28mm x 15mm， 28mm x 28mm x 16mm，28mm x 28mm x 18mm， 28mm x 28mm x 22mm，28mm x 42mm x 28mm， 35mm x 12mm x 35mm，35mm x 15mm x 15mm， 35mm x 15mm x 22mm，35mm x 15mm x 28mm， 35mm x 15mm x 35mm，35mm x 18mm x 22mm， 35mm x 18mm x 28mm，35mm x 18mm x 35mm， 35mm x 22mm x 15mm，35mm x 22mm x 18mm， 35mm x 22mm x 22mm，35mm x 22mm x 28mm， 35mm x 22mm x 35mm，35mm x 28mm x 15mm， 35mm x 28mm x 18mm，35mm x 28mm x 22mm， 35mm x 28mm x 28mm，35mm x 28mm x 35mm， 35mm x 35mm x 15mm，35mm x 35mm x 18mm， 35mm x 35mm x 22mm，35mm x 35mm x 28mm， 35mm x 42mm x 35mm，42mm x 14mm x 42mm， 42mm x 15mm x 42mm，42mm x 18mm x 42mm， 42mm x 22mm x 35mm，42mm x 22mm x 42mm， 42mm x 28mm x 22mm，42mm x 28mm x 28mm， 42mm x 28mm x 35mm，42mm x 28mm x 42mm， 42mm x 35mm x 28mm，42mm x 35mm x 35mm， 42mm x 35mm x 42mm，42mm x 42mm x 22mm， 42mm x 42mm x 28mm，42mm x 42mm x 35mm， 42mm x 54mm x 42mm，52mm x 28mm x 52mm， 52mm x 32mm x 52mm，54mm x 15mm x 54mm， 54mm x 18mm x 54mm，54mm x 22mm x 42mm， 54mm x 22mm x 54mm，54mm x 28mm x 42mm， 54mm x 28mm x 54mm，54mm x 35mm x 35mm， 54mm x 35mm x 42mm，54mm x 35mm x 54mm， 54mm x 42mm x 42mm ，54mm x42mm x 54mm ， 54mm x 54mm x 22mm，54mm x 54mm x 28mm， 54mm x 54mm x 35mm，54mm x 54mm x 42mm， 64mm x 35mm x 64mm，64mm x 42mm x 64mm， 64mm x 54mm x 64mm，67mm x 28mm x 67mm， 67mm x 35mm x 67mm，67mm x 42mm x 67mm， 67mm x 54mm x 67mm，76mm x 28mm x 76mm， 76mm x 35mm x 76mm，76mm x 42mm x 76mm， 76mm x 54mm x 76mm，76mm x 64mm x 76mm， 89mm x 54mm x 89mm，89mm x 64mm x 89mm， 89mm x 76mm x 89mm，108mm x 35mm x 108mm， 108mm x 54mm x 108mm， 108mm x 64mm x 108mm， 108mm x 76mm x 108mm， 108mm x 89mm x 108mm 5060: 10mm，12mm，14mm，15mm，16mm，18mm， 22mm，28mm，35mm，42mm，54mm 5062: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，18mm x 1/2"，12mm x 3/4''， 14mm x 3/4''，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，18mm x 1''， 22mm x 1''，28mm x 11/4''，54mm x 2'' 5063: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，22mm x 1'' 5064: 12mm x 3/8"，10mm x 1/2"，12mm x 1/2"， 14mm x 1/2"，15mm x 1/2"，16mm x 1/2"， 18mm x 1/2"，12mm x 3/4''，14mm x 3/4''， 15mm x 3/4''，16mm x 3/4''，18mm x 3/4''， 22mm x 3/4''，18mm x 1''，22mm x 1''， 22mm x 11/4''，28mm x 11/4''，54mm x 2'' 5065: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，16mm x 3/4''，18mm x 3/4''， 22mm x 3/4''，22mm x 1'' 5270S: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm 5090R: 15mm x 12mm，22mm x 12mm，22mm x 15mm， 22mm x 18mm，28mm x 15mm，28mm x 12mm， 5180: 15mm，18mm，22mm 5270M: 15mm x 1/2''，22mm x 3/4"，28mm x 1"， 35mm x 11/4''，42mm x 11/2"

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range electric, instantaneous, open outlet, mains water heaters. Maximum working pressure 6.6 bar. Maximum operating temperature 70 ˚C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250304707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

REDRING (brand of RK Wholesale Limited) model name, max static pressure, min working pressure on adhesive label.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

078421 078438 078391

Product Images

Approval Holder:

RK Wholesale Limited.

Company Name

RK Wholesale Limited.

Address

Berry Hill Road, Berryhill Trading Estate

Postcode

ST4 2NL

View All Listings by this Company

Electric instantaneous water heater with a plastic casing. Flow is controlled via a solenoid valve operated by an infrared sensor. Temperature is controlled by a dial on the front of the unit. The product incorporates a swivel arm outlet from the base. Maximum working pressure 3.0 bar. Maximum operating temperature 48˚C. Cold supply only.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250304709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm (plain plastic pipe).

Marking:

REDRING (brand of RK Wholesale Limited) on front casing. REDRING (brand of RK Wholesale Limited), model and model name, maximum static pressure and minimum working pressure on adhesive label side of unit.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

43679902: RAHW3 Autosensor Handwash 3kw white.

Product Images

Approval Holder:

RK Wholesale Limited.

Company Name

RK Wholesale Limited.

Address

Berry Hill Road, Berryhill Trading Estate

Postcode

ST4 2NL

View All Listings by this Company

Range of near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

KoGE by Scudo on body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

KoGE WATER DISPENSERS

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Direct coupler (brass with a range of finishes). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

M28 X M28

Marking:

SHS on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

V296-XX ‘XX’ denotes the surface finish which will always be 2 or 3 digits and can be any combination of numbers and/or letters.

Product Images

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of Fastec® F13 and Fastec® F14 fittings for use with Fastec® manifold assemblies, incorporated with brass bodies and EPDM O-rings. To be used with copper pipe complying with BS EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Teco logo etched on body; F13 or F14, Year and batch/month No. (YYMM) on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Fastec® F13 Elbow DN2105503 F13 Fastec fitting 90° M/F DN15 DN2105504 F13 Fastec fitting 90° F/F DN15 Tee DN2105507 F13 Fastec fitting M/F/F DN15 DN2105508 F13 Fastec fitting F/F/F DN15 2 way DN2105510 F13F Fastec splitter DN15 Straight DN2105531 F13 Fastec nipple M/M DN15 DN2105691 F13 Fastec cap Kit DN15 DN2208098 Fastec cap F13F DN15 DN2208080 Fastec fitting F13F DN15 DN2208081 Fastec Fitting extender F13F DN15 Fastec® F14 Elbow DN2208065 F14 Fastec Fitting 90° MF DN20 DN2208066 F14 Fastec Fitting 90° FF DN20 Tee DN2208067 F14 Fastec Fitting 90° MFF DN20 DN2208069 F14 Fastec Fitting 90° FFF DN20 Straight DN2410738 Fastec Fitting extender F14F DN20 DN2410737 Fastec Fitting F14F DN20 DN2208085 Fastec nipple F14M DN20 DN2208099 Fastec cap F14F DN20 DN2208087 Plug fastec F14M DN20 DN2208094 Fastec fitting F13M/F14M DN15

Product Images

Manufacturer:

TECO Srl

Company Name

TECO Srl

Address

Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)

Country

Italy

View All Listings by this Company

Range of spherical valves with a DZR brass body and lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Altecnic logo casted on body; CR, date of manufacture (YYMM); CR etched on body and on 0560/05MC

Installation Requirements:

R001 R511

Expiry date:

31/03/2030

Model:

O560/05FL-HI ¾”BSP(M) O560/05DH ¾”BSP(M) O560/05RT ¾”BSP(M) - with drain valve O560/05HO ¾”BSP(M)

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of click type, pop-up wastes with metal bodies. Maximum operating temperature 60.0°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241002704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ¼” BSP (M)

Marking:

Vinzia Fratelli logo, EN274, NF logo and date of manufacturer (DDD/YY)

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

04, 05, 06 family types. Code example: 00 AA 00 00 00 00 AA(A). Made up of the below. TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 05 - Waste Simple-Rapid with waste drains 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 (in this case the first two numbers are”04 or 05”) or TA200 + TA413 in this case the first two numbers are”06”) BA – TA191 BC – TA193 (in this case the first two number as “05”) or TA198 (in this case the first two number are”06”) BD – TA197 BE – TA195 BH – TA201 CA - TA6 + TA217 / TA229 (in this case the first two numbers are”04 or 05”) or TA6 + PA001 in this case the first two numbers are”06”) WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 51 – PI209 52 – PI210 62 – PI207 85 – PI010 BASE (2 numbers) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2 numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINISH (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238

Product Images

Approval Holder:

VINZIA Fratelli S.p.A.

Company Name

VINZIA Fratelli S.p.A.

Address

Via Borgomanero, 121 Briga Novarese (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 94847

General Email

gianfranco.calzoni@vinzia.com

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

ESPH XXS-XX\XX 1.XX:Rated flow(m³/h),range:2、3、4、8、10、12、16、20m³/h 2.XX:Impeller progession (1,2,3,4,5,6,7)*5 3.xx:Small Impeller (1) 4.End connection mode and size Rated flow(2、3m³ /h) :G1"XG1" Rated flow(4m³ /h) :G1¼"XG1" Rated flow(8、10、12m³ /h) :G1½"XG1½" Rated flow(16、20m³ /h) :G2"XG2"

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TPF on cover. TPF, model & technical information on data label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

TPVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2 ， On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 THM(-3)XX-XX\XX-SE 1. -3: different phase. -- -3: three phase，none: single phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、 16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Approval Holder:

TADMUR PUMP FACTORY WLL

Company Name

TADMUR PUMP FACTORY WLL

Address

P.O. BOX 212023 DOHA

Country

Qatar

View All Listings by this Company

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Please refer to model for maximum operating pressure. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm pushfit

Marking:

Stuart Turner and product info label

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Maximum working pressure 3.8 bar: 47342 Showermate S1.5 bar Twin. 47343 Showermate S2.0 bar Twin. 44925 Showermate S2.0 bar Twin. 44923 Showermate S2.0 bar Single. 44924 Showermate S1.5 bar Twin. 47340 Showermate S2.0 bar Single. Maximum working pressure 4.0 bar: 47341 Showermate S2.6 bar Single. 44920 Showermate S2.6 bar Twin. 44919 Showermate S2.6 bar Single. 47344 Showermate S2.6 bar Twin.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of combined storage and booster sets, incorporating a cold-water storage cistern, submersible pump, solenoid valve or alternative actuated ball valve, non-return valve (not suitable for backflow protection), isolation valves and expansion vessel. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Dutypoint, model & product info on label.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Dutypoint Systems ScubaTANK range comprising of models: ‘ WX A BBBB CCC’ – where: ‘A’ denotes number of pumps and is replaced with 1 or 2. ‘BBBB’ denotes pump size and is replaced with 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060 or 9090. ‘CCC’ denotes size of storage cistern in litres and is replaced with 175, 300, 375, 440, 490, 490, 575, 650, 750, 800, 1050, 1250, 1650 or 2250.

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of overhead shower outlets with brass bodies (various finishes), stainless steel strainers and NBR ‘O’-rings. Open outlet use only. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250708007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP captive nut.

Marking:

Coalbrook (Davroc brand) logo on upper face.

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

XX4003YY, XX4004YY. XX denotes the trim and can be replaced with: CO - Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: CP - Chrome GM - Gunmetal BB - Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of wall and ceiling overhead shower outlets with chromium plated brass bodies. The inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250102019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

DORNBRACHT on cover plate

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

28544977, 28545977, 28564977 & 28565977

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Conditions of use Type 1 Overhead shower

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Notes & Further Information

XXX Denotes the following: First, second & third XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Range of In-line ‘Y’ patterned strainer with ductile iron bodies (blue epoxy powder coated) and stainless-steel screens. Maximum working pressure 16.0 bar. Maximum operating temperature 85ºC.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40-DN300 Flanged.

Marking:

GEMAK, size, PN and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

IV012

Approval Holder:

GEMAK SOTIRAS ANGELOS

Company Name

GEMAK SOTIRAS ANGELOS

Address

Esperidon str. 57013 Thessaloniki

Postcode

Greece

View All Listings by this Company

BOSS Range of Y-pattern strainers with DZR brass bodies and stainless steel strainers. The compression connection is for use with copper pipe to BS EN1057. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (compression models). Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

BOSS, date of manufacture: MM-YY, CR & flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/08/2030

Model:

10460003 - 15MM BOSS 46W Y STRAINER DZR 1/2" BSP (F) 10460014 - 20MM BOSS 46W Y STRAINER DZR 3/4" BSP (F) 10460025 - 25MM BOSS 46W Y STRAINER DZR 1" BSP (F) 10460036 - 32MM BOSS 46W Y STRAINER DZR 1-1/4" BSP (F) 10460047 - 40MM BOSS 46W Y STRAINER DZR 1-1/2" BSP (F) 10460058 - 50MM BOSS 46W Y STRAINER DZR 2" BSP (F) 10460110 - 15MM BOSS 46CW Y STRAINER DZR 15MM Compression 10460121 - 22MM BOSS 46CW Y STRAINER DZR 22MM Compression

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Ningbo Rian Valve Co Ltd. logo, size, PN, DN and flow arrow body

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

604X-15: ½" BSP, BSPP and NPT (F), 604X-20: ¾" BSP, BSPP and NPT (F), 604X-25: 1" BSP, BSPP and NPT (F), 604X-32: 1¼" BSP, BSPP and NPT (F), 604X-40: 1½" BSP, BSPP and NPT (F), 604X-50: 2" BSP, BSPP and NPT (F).

Product Images

Approval Holder:

Ningbo Rian Valve Co., Ltd

Company Name

Ningbo Rian Valve Co., Ltd

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Rian Valve Co., Ltd

Company Name

Ningbo Rian Valve Co., Ltd

Country

China

View All Listings by this Company

Range of in-line Y-patterned strainers with flanged cast iron bodies (blue epoxy powder coated) and stainless steel mesh strainers. The strainers also incorporate a drain plug. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flange end DN50-DN600 (DN50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600)

Marking:

Weflo or Weilong, size, PN, flow arrow, DI No. on body; Weflo or Weilong, Fig No. W.P.(Working pressure), Series No. on data label on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

7102 Y-Strainer

Manufacturer:

WEFLO Valve Co., Ltd.

Company Name

WEFLO Valve Co., Ltd.

Address

No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong

Country

China

View All Listings by this Company

Range of drain taps with brass (or DZR brass, see models) bodies and non-rising spindle headwork. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

250302032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below

Marking:

Size, D.O.M (MM:YY) BS2879-2 & Zhejiang logo on body. DZR Brass models: Size, CR, D.O.M (MM:YY) BS2879-2 & Zhejiang logo

Installation Requirements:

R001 R511

Expiry date:

31/03/2030

Model:

P1013.G15: 1/2 BSP M P1016.G15: 1/2 BSP M (DZR) P1020.G15: 1/2 BSP M P1030.015: 15MM Tail P1050.015: 15MM Tail (DZR) P1040.015: 15MM Tail

Product Images

Manufacturer:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company

Range of wall mounted hose union bib taps incorporating a rising spindle headwork with a T - handle operating member. Products have a brass body. The spout outlets incorporate a hose union connector. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union tap(s).

WRAS Approval Number:

250104026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M)

Marking:

TPK, size & date of manufacture (MM-YY) on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

960981

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

1800 Taps

Description:

A Pillar tap(s).

Deck Mounted Capable of achieving AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005

Expiry date:

28/05/2030

Notes & Further Information

X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Cross top type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Range of pillar taps, incorporating a non-rising spindle headwork with cross top or dome type operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with metal back nuts. All taps are supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250288003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

TP on body

Installation Requirements:

R001 R006

Expiry date:

28/02/2030

Model:

604570 Base sink taps 604583 Cross head sink taps

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

250104025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Bristan on body.

Installation Requirements:

R001 R006

Expiry date:

31/01/2030

Model:

VA NC 1/2 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

'ELS108'. Dual layered, extruded PVC hose incorporating EPDM washers. Maximum working pressure 10.0 Bar Cold water use only.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250302003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (captive nut) x 3/4" BSP (captive nut)

Marking:

ELSE, ELS108, Temperature, Pressure, and date of manufacture (DD/MM/YYYY) on hose body.

Installation Requirements:

R001 R008

Expiry date:

31/03/2030

Model:

ELS108

Product Images

Manufacturer:

EL-SE Kablo ve Plastik Sanayi A.S.

Company Name

EL-SE Kablo ve Plastik Sanayi A.S.

Address

Geposb 11. Cadde No. 13, PK. 41400 Gebze

Country

Turkey

View All Listings by this Company

Range of stainless steel braided, nylon braided, double locked (metal outer) or reinforced (see model), PEX/HTRPE lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections (see model). Maximum operating temperature 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250302005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

See model

Marking:

WRAS, YS and date of manufacture (YYMM) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

2012 XX X DNX AxB LXXXX Where 2012 denotes the series name and hose lining: 20 = series name 12 = inner hose material: PEX/HTRPE Where the first two XX denotes the colour of the exterior hose and can be replaced by: GY = grey, YS = transparent, WH = white, BK = black, GO = golden, CP = chrome, BR = bronze, BN = nickel, Blank = stainless nature, RE = red, BL = blue, SS = stainless nature, ORB = oil rubbed bronze, AC = antique copper plated Where the third X denotes exterior hose and replaced by: T = reinforced hose, LL = nylon braided sheath, SS = stainless steel braided sheath, S = double lock hose Where DNX denotes the nominal diameter of inner hose and can be replaced by: DN4, DN6, DN8, DN10 Where A×B denotes the free combination of hose end connector and can be replaced by: T8 = (8mm Quick Release Spigot), T10 = (10mm Quick Release Spigot), T12 = (12mm Quick Release Spigot), T14 = (14mm Quick Release Spigot), T15 = (15mm Quick Release Spigot), T16 = (16mm Quick Release Spigot), T18 = (18mm Quick Release Spigot), M8 = (8mm Male M Thread), M10 = (10mm Male M Thread), M12 = (12mm Male M Thread), M14 = (14mm Male M Thread), M15 = (15mm Male M Thread), M16 = (16mm Male M Thread), M18 = (18mm Male M Thread), F1/2" = ½” BSP (F), M1/2" = ½” BSP (M), F3/8" = 3/8” BSP (F), M3/8" = 3/8” BSP (M), F3/4" = ¾” BSP (F), M3/4" = ¾” BSP (M), F7/16" = 7/16” BSP (F), M7/16" = 7/16” BSP (M), F9/16" = 9/16” BSP (F), M9/16" = 9/16” BSP (M), F11/16" = 11/16” BSP (F), M11/16" = 11/16” BSP (M). Where LXXXX denotes the length of hose and be replaced by anything between: L0200 (200mm) and L2500 (2500mm)

Product Images

Manufacturer:

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Company Name

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Address

41th Building, No.1777 Jilong Road, Tongan Industrial Zone (Huli), Xiamen, Fujian, 361100

Country

China

View All Listings by this Company

Range of stainless steel braided EPDM lined flexible hose assemblies. The captive nut and M15x1 end connections incorporate a washer. The M8x1, M10x1 and M12x1 end connections incorporate an ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250115009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

YUHUAN WEILEBAO SANITARY WARE CO., LTD. WRAS, year of manufacture by YYYY on ferrule.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

WLB-EPDM-01 series. Bore diameters: DN6, DN8 and DN10. Available end connections: ⅜”, ½”, ¾”, F12x1, F15x1 captive nut. F10x1. 9/16” BSW (F). M8x1, M10x1, M12x1, M15x1. ⅜”, ½”, ¾” BSP (M). 9/16” BSW (M).

Product Images

Approval Holder:

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Company Name

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Address

No. 209 Shuangyang Road, Qinggang Town, Yuhuan City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Company Name

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Address

No. 209 Shuangyang Road, Qinggang Town, Yuhuan City, Zhejiang Province

Country

China

View All Listings by this Company

Range of stainless-steel braided flexible hose assemblies incorporating EPDM inner and plastic (BFSFH12-EE80/150) or brass (BFSFH19-EE60) captive nut end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241002101

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP X 3/4” BSP ELBOW.

Marking:

MIDBRASS®, WRAS and Year of manufacture (YYYY).

Installation Requirements:

R001 R008

Expiry date:

31/10/2029

Model:

BFSFH12-EE80, BFSFH19-EE60 & BFSFH12-EE150.

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company

Manufacturer:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

General Email

View All Listings by this Company

Range of stainless steel inter-locked shower hoses incorporating PVC linings in various finishes. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240988026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only

Size:

See model

Marking:

Aqualisa on ferrule

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

ACY1008 1.5M METAL HOSE CHROME

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of unvented storage cylinders. The secondary circuit is fitted with a temperature and pressure relief valve set at 7.0 bar at 90˚C and an expansion relief valve set at 6.0 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also Supplied with an expansion vessel and tundish. Maximum working pressures: Primary circuit: 5.5 bar Secondary circuit: 6.0 bar Solar circuit:6.0 bar Maximum operating temperature 85.0°C

Section:

1890 Unvented Heating Apparatus

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression all connections

Marking:

Joule, model name, capacity, pressure ratings and other technical information on adhesive label on cylinder

Installation Requirements:

R001 R140 R360

Expiry date:

31/01/2030

Model:

TRSMVD-0090LFC TRSMVD-0120LFB TRSMVD-0150LFB TRSMVD-0180LFB TRSMVD-0210LFC TRSMVD-0250LFC TRSMVD-0300LFC TRSMVI-0090LFC TRSMVI-0120LFB TRSMVI-0150LFB TRSMVI-0180LFB TRSMVI-0210LFC TRSMVI-0250LFC TRSMVI-0300LFC TRSMVS-0150LFB TRSMVS-0180LFB TRSMVS-0210LFC TRSMVS-0250LFC TRSMVS-0300LFC

Product Images

Manufacturer:

Joule Hot Water Systems UK Ltd

Company Name

Joule Hot Water Systems UK Ltd

Address

Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Range of indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: Primary circuit: 6.0 Bar Secondary circuit: 5.5 bar Maximum operating temperature: 85.0°C

Section:

1890 Unvented Heating Apparatus

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Primary circuit: 1” BSP (F) Secondary circuit: 22mm compression

Marking:

Joule logo, model and technical information on adhesive label on body

Installation Requirements:

R001 R140 R360

Expiry date:

31/03/2030

Model:

TRJMVH -0150LFB 150 Cyclone Plus High Gain Indirect Standard TRJMVH -0180LFB 180 Cyclone Plus High Gain Indirect Standard TRJMVH -0210LFC 210 Cyclone Plus High Gain Indirect Standard TRJMVH -0250LFC 250 Cyclone Plus High Gain Indirect Standard TRJMVH -0300LFC 300 Cyclone Plus High Gain Indirect Standard TRJMVH -0150SFB 150 Cyclone Plus High Gain Indirect Slim TRJMVH -0180SFB 180 Cyclone Plus High Gain Indirect Slim TRJMVH -0210SFC 210 Cyclone Plus High Gain Indirect Slim

Product Images

Manufacturer:

Joule Hot Water Systems UK Ltd

Company Name

Joule Hot Water Systems UK Ltd

Address

Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Range of 2, 3, 4, 5 or 6 port manifold assemblies with brass bodies. The products incorporate a spherical valve with a plastic ball on either the inlet or on each outlet (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

250304703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Fastec® F13 internal Ø 20.75 - 20.93mm

Marking:

Teco logo, DN, PN, year and batch/month (YYMM) and F13 on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Manifold with valve on each outlet: DN2309727: DN10 Manifold 2 ways F13F, DN2105548: DN10 Manifold 3 ways F13F, DN1901798: DN10 Manifold 4 ways F13F, DN1901797: DN10 Manifold 5 ways F13F, DN2309733: DN10 Manifold 6 ways F13F, Manifold with valve on inlet: DN2410745: DN15 Manifold 4 ways F13F, DN1901854: DN15 Manifold 5 ways F13F.

Product Images

Manufacturer:

TECO Srl

Company Name

TECO Srl

Address

Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)

Country

Italy

View All Listings by this Company

Range of air venting valves with a gunmetal body. Maximum working pressure 13.5 bar. Maximum operating temperature 95°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

250704007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

NABIC 568, DN size, and product batch code on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

NABIC FIG. 568 range comprising of models: N-568-015: ½” BSP (M). N-568-020: ¾” BSP (M). N-568-025: 1” BSP (M). N-568-032: 1¼” BSP (M). N-568-040: 1½” BSP (M). N-568-050: 2” BSP (M).

Manufacturer:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

View All Listings by this Company

Range of wall mounted, manually operated blending valves with brass bodies (various finishes) and ceramic cartridge headworks controlling both the flow and temperature with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

250302008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Needs to get installed in combination with Rapido Smart Box 35.600.

Size:

Only to be used with compatible Grohe products.

Marking:

Grohe SPA logo on rosette or Grohe logo on operating member. Models 24.259, 24.277 and 24.354 include the new Grohe SPA Logo, all other models include standard Grohe Logo.

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2030

Model:

24.259.xxx 24.277.xxx 24.354.xxx 24.071.xxx 24.069.xxx 24.065.xx3 24.067.xxx 24.063xx1 24.061.xxx 24.059.xx3 24.057.xx1 24.055.xx2 24.053.xx1 24.051.xx2 24.046.xx3 24.048.xx3 24.044.xxx 24.042.xx2 Where xxx / xx1 / xx2 / xx3 denotes finish, can be replaced by: 000 / 001 / 002 / 003– Chrome DC0 / DC1 / DC2 / DC3 – Supersteel DA0 / DA1 / DA2 / DA3 – Warm sunset AL0 / AL1 / AL2 / AL3 – Brushed hard graphite GL0 / GL1 / GL2 / GL3 – cool sunrise IG0 / IG1 / IG2 / IG3 – chrome/gold

Product Images

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of wall mounted, exposed, thermostatic shower valves (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork which diverts the flow between the shower outlets using round or square operating members. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button also using round or square operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250188001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

SCUDO on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2030

Model:

RR-SQUARE-X SQUARE-RR-X RR-ROUND-X ROUND-RR-X Where X denotes the finish and is replaced with: Brushed Brass = BRASS or BB, Black = BLACK or BLK, Brushed Bronze = BRONZE or BZ, Gunmetal = GUN or GM, Chrome = No prix, CHR or CHROME, Nickel = NK or NICKEL, Copper = COPPER or COP, Gold = GOLD or GD, Rose Gold = ROSE or RG, Anthracite = ANTH or AN and White = WH or WHITE.

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Range of wall mounted concealed, shower valves (brass bodies – various plated trim sets) incorporating a ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). Maximum operating pressure 10 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250104010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Products are not supplied with a shower hose, handset, riser rail or spout outlet. Product to be used in combination with 01700180 AXOR iBox universal Basic set or 01400180 AXOR iBox universal 2 Basic set + 13588000 Adapter plate for iBox universal 2.

Size:

¾” BSP (F)

Marking:

Axor on faceplate

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2030

Model:

46450xx0 46451xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

View All Listings by this Company

Range of wall mounted, concealed, digitally controlled thermostatic blending valve with a 1, 2 or 3 outlets, incorporating a plastic body, the flow and temperature is controlled via a digital user interface. Products incorporate a built-in pump and a solenoid valve. Maximum working pressure 1.0 Bar Maximum operating temperature 65.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250302013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm spigot connection

Marking:

Aqualisa logo, pressure, temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R040

Expiry date:

31/03/2029

Model:

705758 705759 705760 Models added July 2025 1013928 1013929 1001269 1001271 1001273

Product Images

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Wall mounted, bar type thermostatic blending valve, (brass bodies - various finishes), incorporating a half turn ceramic disc for manually diverting the flow between the shower handset, on off position, and the overhead shower with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button with a dome type operating member. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250302017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) x ½” BSP (M) offset unions

Marking:

Hansgrohe on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2030

Model:

27 633 xx0. Models added April 2025: 24592xx0, 24593xx0. Models added July 2025: 48 794 xx0 & 48 795 xx0. Model added September 2025: 24 594 xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

View All Listings by this Company

Range of butterfly valves with black epoxy coated ductile iron bodies & aluminium bronze discs. The closing mechanism can be controlled by lever or handwheel (via gearbox). Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250108016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

F621- DN50-200, F622: DN50-300. F624 DN50-150, F625 DN50-300, DM925LW DN65-150.

Marking:

Crane, model, WRAS, temp 80°C, temperature rating, PN, BS EN 593 & year of manufacture (YYYY) on ID plate on body. Size on body and disc. Crane on lever.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

Crane F621: Lever Operated semi-lugged Butterfly Valve. Crane F622: Gearbox Operated semi-lugged Butterfly Valve. Crane F624: Lever Operated fully lugged Butterfly Valve. Crane F625: Gearbox Operated fully lugged Butterfly Valve. DM925LW – Lever operated double regulating butterfly valve fully lugged.

Product Images

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of butterfly valves with black epoxy coated ductile iron bodies & aluminium bronze discs. The closing mechanism can be controlled by lever or handwheel (via gearbox). Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250108017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

950W- DN50-200 950WG - DN50-300 970W - DN50-150 970WG - DN50-300 973W DN65-150

Marking:

Hattersley, model, WRAS, temp 80°C, temperature rating, PN, BS EN 593 & year of manufacture (YYYY) on ID plate on body. Size on body and disc. Hattersley on lever.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

950W: Lever Operated semi-lugged Butterfly Valve. 950WG: Gearbox Operated semi-lugged Butterfly Valve. 970W: Lever Operated fully lugged Butterfly Valve. 970WG: Gearbox Operated fully lugged Butterfly Valve. 973W: Lever operated double regulating butterfly valve fully lugged.

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of eccentric lugged or wafer type butterfly valves with stainless teel or blue epoxy coated bodies and stainless steel or epoxy coated ductile iron discs, incorporating EPDM or PTFE seats (see models). Max working pressure: 10.0 Bar, 16.0 Bar or 20.0 Bar (see models). Max operating temperature 80°C or 99°C (see models).

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250302009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Models 301-371X-125LB Wafer Type & 302-371X-125LB Lug type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’, 12’’, 14’’, 16’’, 18", 20" & 24" Models: 811-372F-150LB Wafer Type & 812-372F-150LB Lug Type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’ & 12” Lug type connections Model: D342X-16Q: DN200, DN300, DN400, DN500, DN600, DN800, DN1000 & DN1200 Flange connections

Marking:

EMV, PN, temperature and other technical information on data plate on body. Shanghai Ever Mark Valves logo, flow arrow and size cast on body. Note Flow Arrow is only present on models 811-372F-150LB & 812-372F-150LB.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

301-371X-125LB Wafer type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 302-371X-125LB Lug type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 811-372F-150LB Wafer type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C 812-372F-150LB Lug type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C D342X-16Q. Eccentric flanged type, Epoxy coated ductile iron discs and stainless steel seats, 16.0 Bar, 80°C

Product Images

Manufacturer:

Shanghai Ever Mark Valves Co., LTD

Company Name

Shanghai Ever Mark Valves Co., LTD

Address

No.88 Jinle Road, Bao Shan District, Shanghai, China

View All Listings by this Company

Range of butterfly valves with blue epoxy coated ductile iron bodies, coated ductile iron or stainless-steel discs & EPDM sealing ring. The closing mechanism can be controlled by single lever or a handwheel. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250302033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN 32 to DN 300 Flanged

Marking:

VIR Logo, products info and temperature and PN on data plate.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

4025L (with lever) 4025G (with gear) 402WL (with lever) 402WG (with gear) 4325L (with lever) 4325G (with gear) 432WL (with lever) 432WG (with gear)

Product Images

Approval Holder:

VIR Valvoindustria Ing. Rizzio S.p.A.

Company Name

VIR Valvoindustria Ing. Rizzio S.p.A.

Address

Via Circonvallazione n. 10, 13018 Valduggia (VC)

Country

Italy

View All Listings by this Company

Range of wafer and fully lugged butterfly valves (gear or handwheel operation) with a cast iron body (blue epoxy coated), EPDM seat and stainless steel disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250704005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

Weflo or Weilong, PN, DN casted onto body; Weflo or Weilong, Fig., size, body, disc, liner, Series No., WRAS on data label on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

2302-00-H wafer DN 50-300 Hand operation Stainless Steel disc(DN50,65, 80, 100, 125,150, 200, 250, 300) 2302-00-G wafer DN 50-600 Gear operation Stainless Steel disc(DN50,65, 80, 100, 125,150, 200, 250, 300, 350, 400, 450, 500, 600) 2502-00-H lug DN 50-300 Hand operation Stainless Steel disc(DN50,65, 80, 100, 125,150, 200, 250, 300) 2502-00-G lug DN 50-600 Gear operation Stainless Steel disc(DN50,65, 80, 100, 125,150, 200, 250, 300, 350, 400, 450, 500, 600) 23 stands for Wafer, 25 stands for lug, 02 stands for stainless steel disc, H stands for Hand operation, G stands for Gear operation.

Manufacturer:

WEFLO Valve Co., Ltd.

Company Name

WEFLO Valve Co., Ltd.

Address

No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong

Country

China

View All Listings by this Company

Range of wafer and fully lugged butterfly valves (gear or handwheel operation) with a cast iron body and disc (blue epoxy coated), EPDM seat. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250304004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Weflo or Weilong, PN, DN casted onto body; Weflo or Weilong, Fig. Series No. size, body, disc, liner, WRAS on data label on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

2304-00-H wafer DN 50-300 Hand operation blue epoxy coated iron disc(DN50,65, 80, 100, 125,150, 200, 250, 300) 2304-00-G wafer DN 50-600 Gear operation blue epoxy coated iron disc(DN50,65, 80, 100, 125,150, 200, 250, 300, 350, 400, 450, 500, 600) 2504-00-H lug DN 50-300 Hand operation blue epoxy coated iron disc(DN50,65, 80, 100, 125,150, 200, 250, 300) 2504-00-G lug DN 50-600 Gear operation blue epoxy coated iron disc(DN50,65, 80, 100, 125,150, 200, 250, 300, 350, 400, 450, 500, 600) 23 stands for Wafer, 25 stands for lug, 04 stands for blue epoxy coated iron disc, H stands for Hand operation, G stands for Gear operation.

Product Images

Manufacturer:

WEFLO Valve Co., Ltd.

Company Name

WEFLO Valve Co., Ltd.

Address

No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong

Country

China

View All Listings by this Company

Range of black nylon coated cast iron equilibrium float operated valves with EPDM seals. Maximum working pressure 10.0 Bar Maximum operating temperature 23.0°C

Section:

2100 Valves

Section Subtitle:

Float operated, equilibrium, metal.

WRAS Approval Number:

250302714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Peter Smith, model code and other technical information on data plate on body. DN and PN on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

FIG:501 DN50, DN80, DN100, DN150, DN200 FIG:501ZFB DN50, DN80, DN100, DN200

Product Images

Manufacturer:

The Peter Smith Valve Company

Company Name

The Peter Smith Valve Company

Address

Occupation Road Cinderhill Road Bulwell

Postcode

NG6 8RX

Country

Nottingham

Phone

0115 9272831

View All Listings by this Company

Range of in-line, manually adjustable pressure reducing valves with DZR brass bodies. Some models are available with a pressure gauge. Maximum working pressure: 16bar – outlet pressure range: 1.0 - 6.0 bar. Maximum working temperature: 80°C

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

250302707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Caleffi & technical information on band. CR, flow arrow, DN on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

535015H: 15 mm compression. 535022H: 22 mm compression. 535040H: DN 15 ½". 535041H: DN 15 ½" with manometer. 535050H: DN 20 ¾". 535051H: DN 20 ¾" with manometer. 535060H: DN 25 1". 535061H: DN 25 1" with manometer. 535070H: DN 32 1¼". 535071H: DN 32 1¼" with manometer. 535080H: DN 40 1½". 535081H: DN 40 1½" with manometer. 535090H: DN 50 2". 535091H: DN 50 2" with manometer Model added July 2025 535028H: DN 28 28mm x 28mm

Product Images

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of in-line, manually adjustable pressure reducing valves with brushed chrome DZR brass bodies. Outlet pressure range: 1.0 - 6.0 bar. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

250304721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) ¾” BSP (F) 15mm compression 22mm compression

Marking:

Officine Rigamonti Spa logo, DN, PN, flow arrow, DR, Made in Italy on body.

Installation Requirements:

R001 R120

Expiry date:

31/03/2030

Model:

Art.0218.515 Art.0218.514 Art.0218.520 Art.0218.522

Product Images

Manufacturer:

Officine Rigamonti Spa

Company Name

Officine Rigamonti Spa

Address

Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)

Country

Italy

Phone

+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company