Officine Rigamonti Spa Approvals


WRAS Approval Number: 1905390

Filling link assembly incorporating a pressure reducing valve (maximum outlet pressure between 1.0 & 5.0 bar) and a double check valve assembly which incorporates check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3) housed within a DZR brass body. The product incorporates a push type valve which allows water to flow when operated until the required pressure is achieved. Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 1015 Filling Loop
  • WRAS Approval Number: 1905390
  • Expiry date: 31/05/2024
  • Size: 15mm compression inlet /outlet.
  • Marking: Officine Rigamonti spa logo, (the letters ‘OR’ within an oval), size, DR, direction of flow and date of manufacture (MMYY) on body.
  • Installation Requirements R001
  • Model
    Art. 523.815 & Art 523.816 filling loop device
  • Manufacturer: Officine Rigamonti Spa
    Company Name
    Officine Rigamonti Spa
    Address
    Via Circonvallazione 9, 13018 Valduggia (VC), Italy
    Phone
    +39 0163 48 165 Fax: +39 0163347254
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007375

Range of brass bodied automatic air venting valves incorporating a plasitc float. The 501.512 AAV and 501.515 AAV models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

  • Section: 1980 Valves
  • Section Subtitle: Air venting. Fittings in this section are suitable for above ground installations only.
  • WRAS Approval Number: 2007375
  • Expiry date: 31/07/2025
  • Size: See model.
  • Marking: Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.
  • Installation Requirements R001 R200
  • Model
    502.012: ⅜” BSP (M). 502.015: ½” BSP (M). 502.020: ¾” BSP (M). 502.024: 1” BSP (M). 501.512 AAV: ⅜” BSP (M). 501.515 AAV: ½” BSP (M).
  • Manufacturer: Officine Rigamonti Spa
    Company Name
    Officine Rigamonti Spa
    Address
    Via Circonvallazione 9, 13018 Valduggia (VC), Italy
    Phone
    +39 0163 48 165 Fax: +39 0163347254
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007383

Range of brass bodied automatic air venting valves incorporating a plasitc float. The D2004 models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

  • Section: 1980 Valves
  • Section Subtitle: Air venting. Fittings in this section are suitable for above ground installations only.
  • WRAS Approval Number: 2007383
  • Expiry date: 31/07/2025
  • Size: See model.
  • Marking: Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.
  • Installation Requirements R001 R200
  • Model
    RANGE OF AUTOMATIC AIR VENTING VALVES: D2003: 3/8” BSP (M). D2003: ½” BSP (M). D2003: ¾” BSP (M). D2003: 1” BSP (M). D2004: ½” BSP (M).
  • Factor: Crane Ltd
    Company Name
    Crane Ltd
    Address
    Crane House, Epsilon Terrace, West Road, Ipswich,
    Postcode
    IP3 9FJ
    Phone
    01473 277 364
    General Email
    bwiggins@crane-ltd.co.uk
    View All Listings by this Company
  • Manufacturer: Officine Rigamonti Spa
    Company Name
    Officine Rigamonti Spa
    Address
    Via Circonvallazione 9, 13018 Valduggia (VC), Italy
    Phone
    +39 0163 48 165 Fax: +39 0163347254
    General Email
    info@officinerigamonti.it
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007380

Range of brass bodied automatic air venting valves incorporating a plasitc float. The FIG 776 models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

  • Section: 1980 Valves
  • Section Subtitle: Air venting. Fittings in this section are suitable for above ground installations only.
  • WRAS Approval Number: 2007380
  • Expiry date: 31/07/2025
  • Size: See model.
  • Marking: Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.
  • Installation Requirements R001 R200
  • Model
    RANGE OF AUTOMATIC AIR VENTING VALVES: FIG 775: 3/8” BSP (M). FIG 775: ½” BSP (M). FIG 775: ¾” BSP (M). FIG 775: 1” BSP (M). FIG 776: ½” BSP (M).
  • Factor: Hattersley
    Company Name
    Hattersley
    Address
    Crane House, Epsilon Terrace, West Road, Ipswich,
    Postcode
    IP3 9FJ
    View All Listings by this Company
  • Manufacturer: Officine Rigamonti Spa
    Company Name
    Officine Rigamonti Spa
    Address
    Via Circonvallazione 9, 13018 Valduggia (VC), Italy
    Phone
    +39 0163 48 165 Fax: +39 0163347254
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105806

Range of adjustable, in-line pressure reducing valves with DZR brass bodies. Adjsutable between 1.0 bar and 5.5 bar outlet pressure. Compression models are for use with copper pipe to EN1057. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 80°C.

  • Section: 2200 Valves
  • Section Subtitle: Pressure reducing.
  • WRAS Approval Number: 2105806
  • Expiry date: 31/05/2026
  • Size: See model.
  • Marking: OR (Trademark of Officine Rigamonti SpA), DN, flow arrow, pressure, DR, WRAS and forging/cast date (MMYY) on body.
  • Installation Requirements R001 R120
  • Model
    232.007: 15mm compression. 232.008: 22mm compression. 232.009: ½” BSP (F) internal or ¾” BSP (M) external thread on both inlets.
  • Manufacturer: Officine Rigamonti Spa
    Company Name
    Officine Rigamonti Spa
    Address
    Via Circonvallazione 9, 13018 Valduggia (VC), Italy
    Phone
    +39 0163 48 165 Fax: +39 0163347254
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205802

Pressure relief valve pre-set at 6.0 bar, with a brass body and EPDM seat washer. Maximum operating temperature 115°C.

  • Section: 2210 Valves
  • Section Subtitle: Pressure relief.
  • WRAS Approval Number: 2205802
  • Expiry date: 31/05/2027
  • Note: For closed circuit use only.
  • Size: ½” BSP (F) x ½” BSP (F)
  • Marking: Officine Rigamonti logo (OR), size, PN10 and flow arrow on body. Made in Italy and 6.0 bar on cap
  • Installation Requirements R001 R200
  • Model
    Art.487
  • Manufacturer: Officine Rigamonti Spa
    Company Name
    Officine Rigamonti Spa
    Address
    Via Circonvallazione 9, 13018 Valduggia (VC), Italy
    Phone
    +39 0163 48 165 Fax: +39 0163347254
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205803

Range of pressure reducing valves with DZR brass bodies, internal stainless steel filter, EPDM ‘O’-rings and diaphragm. Adjustable outlet pressures between 1.0 and 6.0 bar or 1.0 and 12.0 bar (see model). Maximum inlet supply pressure 25.0 bar. Maximum operating temperature 80°C.

  • Section: 2200 Valves
  • Section Subtitle: Pressure reducing.
  • WRAS Approval Number: 2205803
  • Expiry date: 31/05/2027
  • Size: SEE MODEL
  • Marking: Officine Rigamonti logo (‘OR’), size, DN, flow arrow, DR and date of manufacturer (MM.YY) on body.
  • Installation Requirements R001 R120
  • Model
    Adjustable between 1.0-6.0 bar: 216.015: ½” BSP (M) Union, 216.020: ¾” BSP (M) Union, 216.025: 1” BSP (M) Union, 216.033: 1 ¼” BSP (M) Union, 216.042: 1 ½” BSP (M) Union, 216.050: 2” BSP (M) Union. Adjustable between 1.0-12.0 bar: 216.016: ½” BSP (M) Union, 216.021: ¾” BSP (M) Union, 216.026: 1” BSP (M) Union, 216.034: 1 ¼” BSP (M) Union, 216.043: 1 ½” BSP (M) Union, 216.051: 2” BSP (M) Union.
  • Manufacturer: Officine Rigamonti Spa
    Company Name
    Officine Rigamonti Spa
    Address
    Via Circonvallazione 9, 13018 Valduggia (VC), Italy
    Phone
    +39 0163 48 165 Fax: +39 0163347254
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1