Section:

0470 Combination Tap Assemblies

Description:

A Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted. Stainless steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap. Supplied with a 15x15mm compression isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with cross top operating members. The product is supplied with metal backnuts. Maximum temperature 60°C Maximum Pressure 10 bar

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250615012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP(M)

Marking:

DTC59 on rear of body

Installation Requirements:

R001 R006 R020

Expiry date:

30/06/2030

Model:

TUD08 & TUD08/501

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2030

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Products to be installed in combination with 13623180 Basic set, which does not form part of this approval.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE

Range of two-hole, single outlet (fixed) combination tap assembly (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating member. Maximum working pressure Bar 10.0 Maximum operating temperature 85°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250788005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Range of stainless steel braided, EPDM lined flexible hose assemblies Incorporating 1/2" BSP captive nut end connections.

Marking:

SCUDO logo, hot & cold indicators on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

TAP307, BLACK304ORBL, BR-BRASS304, SWBR048 PBBR048, SWBR057, PBBR057, SWBR066 PBBR066, SWBR110, SWBR119, TAP249L BLACK249ORBL, BR-BRASS249, SWBR021, PBBR021 SWBR030, PBBR030, SWBR039, PBBR039 SWBR092 & SWBR101

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Concealed Undefinable Air Gap – See IRN’s

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome, RG - Rose Gold, BTG - Brushed Titanium gold, BZG - Brushed Zirconium gold, BRG - Brushed Rose gold, MW - Matte white, BS - Brushed stainless, BN - Brushed nickel, PN - Polished nickel, GM - Gunmetal, B - Matte black, TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Product Images

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Concealed Supplied with an Inlet adaptor

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (brass body – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240402092

Size:

¾” BSP (M)

Marking:

ESTEEM on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2029

Model:

E61112 Brushed Brass E61109 Matt Black E61118 Brushed Brass E61115 Matt Black

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly (chrome plated brass body) incorporating a two-way diverter headwork that controls the flow between the spout outlet and shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic mixing cartridge, the incorporates a manual override button. The spout outlet incorporates a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 5 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2303407

Size:

¾” BSP (M)

Marking:

Aqualisa & 707096 on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/03/2028

Model:

707096

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

GE03, GE03/501, CR23 & CR23/501 Range of two hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating quarter turn ceramic disc headworks with single lever or cross-top operating members and manual diverters to shower outlets. The spout outlets incorporate plastic flow straighteners. This approval includes a hose & handset and the products are supplied with metal back-nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250715307

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP

Marking:

Deva - DTC59 on rear

Installation Requirements:

R001 R006 R020

Expiry date:

31/07/2030

Model:

GE03, GE03/501, CR23 & CR23/501

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Wall Mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of deck mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator, and the product is supplied with shower hose and handset (with flow regulator) and metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

240402091

Size:

¾” BSP (M). Claims for flow rate, accuracy & working pressure by are made by the manufacturer and not considered part of the listing.

Marking:

ESTEEM on body.

Installation Requirements:

R001 R006 R020

Expiry date:

30/04/2029

Model:

E61113 Brushed Brass E61110 Matt Black E61119 Brushes Brass E61116 Matt Black

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

Section:

0530 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

Wall Mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Section:

0530 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

31/08/2030

Notes & Further Information

1）No Suffix-Chrome 2) -**Represents the following different surface treatments: 1.H = Black 2.DYB = Matte white 3.BZ = Perl white painted 4.HGTS = Red bronze 5.HTL = Yellow bronze brushed 6.Q = Bronze 7.QTSL = Bronze brushed bright 8.QTS = Bronze brushed matte 9.STS = Acid copper brushed 10.SDMGJ = Water plated rose gold 11.N = Nickel brushed bright light 12.NP = Nickel brushed 13.TJ = Titanium gold 14.TJLS = Titanium gold brushed 15.G = Gold 16.GJS = Gold brushed 17.GJSY = Zirconium gold wire drawing matte 18.PGJFY = Zirconium gold wire drawing matte bright light 19.PLSJ = Brushed gold 20.LSJY = Brushed gold matte 21.MGJ = Rose gold 22.MGJL = Rose gold brushed 23.DMGJ = Light rose gold brushed 24.HTS = Red bronze brushed 25.QHP = Grey 26.LSQH = Grey brushed 27.LHMGJ = Brushed yellow rose gold

Product Images

Approval Holder:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of three-hole, brass bodied, single outlet (fixed) combination tap assemblies available with various finishes (see models). The products incorporate either a non-rising spindle (models 1648 and 1881 only) or quarter turn ceramic disc (all other models) headworks with either cross top (models 1648 and 1881 only) or single lever (all other models) operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts and lever operated pop-up wastes. Maximum working pressure 3.0 Bar Maximum operating temperature 65.0°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250702039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Drummonds logo on side valve operating member

Installation Requirements:

R001 R005 R010

Expiry date:

31/07/2030

Model:

DAD1640*UK The Coll Lever 3 Hole Basin Mixer DAD1648*UK The Mull Classic 3 Hole Basin Mixer DAD1659*MUK The Chessleton Lever 3 Hole Basin Mixer DAD1659*UK The Chessleton Lever 3 Hole Basin Mixer DAD1663*UK The Chessleton Lever 3 Hole Basin Mixer DAD1668*MUK The Coll Lever 3 Hole Basin Mixer DAD1668*UK The Coll Lever 3 Hole Basin Mixer DAD1881* The Bibury 3 Hole Basin Mixer Where * denotes the finish, and can be replaced with any of the following: B – Unlacquered Brass, C – Chrome, N – Nickel, Q – Brushed Nickel, V – Antique Brushed Brass, W – Antique Nickel, X – Brushed Brass, Y – Antique Bronze, Z - Antique Brass

Approval Holder:

Drummonds Bathrooms Ltd

Company Name

Drummonds Bathrooms Ltd

Address

Unit 2c Henley Business Park Pirbright Road Normandy Surrey

Postcode

GU3 2DX

Country

United Kingdom

General Email

nick@drummonds-uk.com

View All Listings by this Company

Range of cylindrical or tubular expansion vessels with epoxy coated carbon steel bodies. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” or 1” BSP (M)

Marking:

Trade-Tec, size in L and technical information on adhesive label

Installation Requirements:

R001 R530

Expiry date:

30/06/2029

Model:

TRPVES08 TRPVES12 TRPVES19 TRPVES24 TRPVES35 TRPVES50 TRPVES80 TRPVES100

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve (suitable for back flow protection against fluid category 3) and a stainless-steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Orkli logoon valve body, production date and hour (DD/MM/YY hh:mm) printed on ball valve body; CR, flow arrow, Orkli logo on double check valve body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

9E26009

Approval Holder:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

Range of filling loop assemblies consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression or 15mm pushfit.

Marking:

Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

521726, 941192.

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

View All Listings by this Company

Range of M profile copper press fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404076

Size:

see models

Marking:

Brand name MAMBA, size, month/year & WRAS on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

MAMBA Range: STRAIGHT COUPLING CxC: 60111515 15mm PRESSFIT COUPLER 60112222 22mm PRESSFIT COUPLER 60112828 28mm PRESSFIT COUPLER 60113535 35mm PRESSFIT COUPLER 60114242 42mm PRESSFIT COUPLER 60115454 54mm PRESSFIT COUPLER SLIP COUPLING C x C: 60171515 15mm PRESSFIT SLIP COUPLER 60172222 22mm PRESSFIT SLIP COUPLER 60172828 28mm PRESSFIT SLIP COUPLER 60173535 35mm PRESSFIT SLIP COUPLER 60174242 42mm PRESSFIT SLIP COUPLER 60175454 54mm PRESSFIT SLIP COUPLER REDUCING COUPLING C x C: 60112215 22mm X 15mm PRESSFIT REDUCING COUPLER 60112815 28mm X 15mm PRESSFIT REDUCING COUPLER 60112822 28mm X 22mm PRESSFIT REDUCING COUPLER 60113515 35mm X 15mm PRESSFIT REDUCING COUPLER 60113522 35mm X 22mm PRESSFIT REDUCING COUPLER 60113528 35mm X 28mm PRESSFIT REDUCING COUPLER 60114215 42mm X 15mm PRESSFIT REDUCING COUPLER 60114222 42mm X 22mm PRESSFIT REDUCING COUPLER 60114228 42mm X 28mm PRESSFIT REDUCING COUPLER 60114235 42mm X 35mm PRESSFIT REDUCING COUPLER 60115415 54mm X 15mm PRESSFIT REDUCING COUPLER 60115422 54mm X 22mm PRESSFIT REDUCING COUPLER 60115428 54mm X 28mm PRESSFIT REDUCING COUPLER 60115435 54mm X 35mm PRESSFIT REDUCING COUPLER 60115442 54mm X 42mm PRESSFIT REDUCING COUPLER FITTING REDUCER F x C: 60132215 22mm X 15mm PRESSFIT FITTNG REDUCER 60132815 28mm X 15mm PRESSFIT FITTNG REDUCER 60132822 28mm X 22mm PRESSFIT FITTNG REDUCER 60133515 35mm X 15mm PRESSFIT FITTNG REDUCER 60133522 35mm X 22mm PRESSFIT FITTNG REDUCER 60133528 35mm X 28mm PRESSFIT FITTNG REDUCER 60134215 42mm X 15mm PRESSFIT FITTNG REDUCER 60134222 42mm X 22mm PRESSFIT FITTNG REDUCER 60134228 42mm X 28mm PRESSFIT FITTNG REDUCER 60134235 42mm X 35mm PRESSFIT FITTNG REDUCER 60135415 54mm X 15mm PRESSFIT FITTNG REDUCER 60135422 54mm X 22mm PRESSFIT FITTNG REDUCER 60135428 54mm X 28mm PRESSFIT FITTNG REDUCER 60135435 54mm X 35mm PRESSFIT FITTNG REDUCER 60135442 54mm X 42mm PRESSFIT FITTNG REDUCER 90DEG ELBOW C x C: 60411515 15mm PRESSFIT ELBOW 60412222 22mm PRESSFIT ELBOW 60412828 28mm PRESSFIT ELBOW 60413535 35mm PRESSFIT ELBOW 60414242 42mm PRESSFIT ELBOW 60415454 54mm PRESSFIT ELBOW 90DEG STREET ELBOW F x C: 60431515 15mm PRESSFIT STREET ELBOW 60432222 22mm PRESSFIT STREET ELBOW 60432828 28mm PRESSFIT STREET ELBOW 60433535 35mm PRESSFIT STREET ELBOW 60434242 42mm PRESSFIT STREET ELBOW 60435454 54mm PRESSFIT STREET ELBOW 45DEG ELBOW C x C: 60451515 15mm PRESSFIT OBTUSE ELBOW 60452222 22mm PRESSFIT OBTUSE ELBOW 60452828 28mm PRESSFIT OBTUSE ELBOW 60453535 35mm PRESSFIT OBTUSE ELBOW 60454242 42mm PRESSFIT OBTUSE ELBOW 60455454 54mm PRESSFIT OBTUSE ELBOW 45DEG STREET ELBOW F x C: 60481515 15mm PRESSFIT OBTUSE STREET ELBOW 60482222 22mm PRESSFIT OBTUSE STREET ELBOW 60482828 28mm PRESSFIT OBTUSE STREET ELBOW 60483535 35mm PRESSFIT OBTUSE STREET ELBOW 60484242 42mm PRESSFIT OBTUSE STREET ELBOW 60485454 54mm PRESSFIT OBTUSE STREET ELBOW CAP C x C: 60811515 15mm PRESSFIT STOP END 60812222 22mm PRESSFIT STOP END 60812828 28mm PRESSFIT STOP END 60813535 35mm PRESSFIT STOP END 60814242 42mm PRESSFIT STOP END 60815454 54mm PRESSFIT STOP END EQUAL TEE C x C: 60151515 15mm PRESSFIT TEE 60222222 22mm PRESSFIT TEE 60282828 28mm PRESSFIT TEE 60353535 35mm PRESSFIT TEE 60424242 42mm PRESSFIT TEE 60545454 54mm PRESSFIT TEE PART CROSSOVER F x C: 60271515 15mm PRESSFIT PART CROSSOVER 60272222 22mm PRESSFIT PART CROSSOVER CROSSOVER C x C: 60291515 15mm PRESSFIT FULL CROSSOVER 60292222 22mm PRESSFIT FULL CROSSOVER REDUCER ELBOW 60412215 22mm X 15mm PRESSFIT REDUCING ELBOW REDUCING TEE: 60221515 22mm X 15mm X 15mm PRESSFIT REDUCING TEE 60221522 22mm X 15mm X 22mm PRESSFIT REDUCING TEE 60282222 28mm X 22mm X 22mm PRESSFIT REDUCING TEE 60282228 28mm X 22mm X 28mm PRESSFIT REDUCING TEE 60222215 22mm X 22mm X 15mm PRESSFIT REDUCING TEE 60282815 28mm X 28mm X 15mm PRESSFIT REDUCING TEE 60282822 28mm X 28mm X 22mm PRESSFIT REDUCING TEE 60353515 35mm X 35mm X 15mm PRESSFIT REDUCING TEE 60353522 35mm X 35mm X 22mm PRESSFIT REDUCING TEE 60353528 35mm X 35mm X 28mm PRESSFIT REDUCING TEE 60424215 42mm X 42mm X 15mm PRESSFIT REDUCING TEE 60424222 42mm X 42mm X 22mm PRESSFIT REDUCING TEE 60424228 42mm X 42mm X 28mm PRESSFIT REDUCING TEE 60424235 42mm X 42mm X 35mm PRESSFIT REDUCING TEE 60545415 54mm X 54mm X 15mm PRESSFIT REDUCING TEE 60545422 54mm X 54mm X 22mm PRESSFIT REDUCING TEE 60545428 54mm X 54mm X 28mm PRESSFIT REDUCING TEE 60545435 54mm X 54mm X 35mm PRESSFIT REDUCING TEE 60545442 54mm X 54mm X 42mm PRESSFIT REDUCING TEE

Product Images

Approval Holder:

MDS Global Sourcing Ltd

Company Name

MDS Global Sourcing Ltd

Address

10 Alesbury Court Lapworth

Postcode

B94 6BE

Country

United Kingdom

Phone

07771 755057

General Email

scott@mdsgroup.co.uk

View All Listings by this Company

N·U Range of stainless steel (304S31/316S11) press fittings for use with N·U series 1 & 2 stainless steel (304S31/316S11) pipe. The fittings and tube are assembled using a crimping tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309386

Size:

⅜” - 4” BSPT (M). ⅜” - 4” BSPT (F). ½” - 2½” captive nut.

Marking:

Fittings: N·U Mech & model Pipe: N·U mech brand logo on pipe, size, 304S31 or 316S11 & EN10312

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Fittings: D15C-15 (15° elbow with plain ends): 15mm, D15C-18 (15° elbow with plain ends): 18mm, D15C-22 (15° elbow with plain ends): 22mm, D15C-28 (15° elbow with plain ends): 28mm, D15C-35 (15° elbow with plain ends): 35mm, D15C-42 (15° elbow with plain ends): 42mm, D15C-54 (15° elbow with plain ends): 54mm, D15C-76.1 (15° elbow with plain ends): 76.1mm, D15C-88.9 (15° elbow with plain ends): 88.9mm, D15C-108 (15° elbow with plain ends): 108mm, D30C-15 (30° elbow with plain ends): 15mm, D30C-18 (30° elbow with plain ends): 18mm, D30C-22 (30° elbow with plain ends): 22mm, D30C-28 (30° elbow with plain ends): 28mm, D30C-35 (30° elbow with plain ends): 35mm, D30C-42 (30° elbow with plain ends): 42mm, D30C-54 (30° elbow with plain ends): 54mm, D30C-76.1 (30° elbow with plain ends): 76.1mm, D30C-88.9 (30° elbow with plain ends): 88.9mm, D30C-108 (30° elbow with plain ends): 108mm, D45C-15 (45° elbow with plain ends): 15mm, D45C-18 (45° elbow with plain ends): 18mm, D45C-22 (45° elbow with plain ends): 22mm, D45C-28 (45° elbow with plain ends): 28mm, D45C-35 (45° elbow with plain ends): 35mm, D45C-42 (45° elbow with plain ends): 42mm, D45C-54 (45° elbow with plain ends): 54mm, D45C-76.1 (45° elbow with plain ends): 76.1mm, D45C-88.9 (45° elbow with plain ends): 88.9mm, D45C-108 (45° elbow with plain ends): 108mm, D60C-15 (60° elbow with plain ends): 15mm, D60C-18 (60° elbow with plain ends): 18mm, D60C-22 (60° elbow with plain ends): 22mm, D60C-28 (60° elbow with plain ends): 28mm, D60C-35 (60° elbow with plain ends): 35mm, D60C-42 (60° elbow with plain ends): 42mm, D60C-54 (60° elbow with plain ends): 54mm, D60C-76.1 (60° elbow with plain ends): 76.1mm, D60C-88.9 (60° elbow with plain ends): 88.9mm, D60C-108 (60° elbow with plain ends): 108mm, D75C-15 (75° elbow with plain ends): 15mm, D75C-18 (75° elbow with plain ends): 18mm, D75C-22 (75° elbow with plain ends): 22mm, D75C-28 (75° elbow with plain ends): 28mm, D75C-35 (75° elbow with plain ends): 35mm, D75C-42 (75° elbow with plain ends): 42mm, D75C-54 (75° elbow with plain ends): 54mm, D75C-76.1 (75° elbow with plain ends): 76.1mm, D75C-88.9 (75° elbow with plain ends): 88.9mm, D75C-108 (75° elbow with plain ends): 108mm, D90C-12 (90° elbow with plain ends): 12mm, D90C-15 (90° elbow with plain ends): 15mm, D90C-18 (90° elbow with plain ends): 18mm, D90C-22 (90° elbow with plain ends): 22mm, D90C-28 (90° elbow with plain ends): 28mm, D90C-35 (90° elbow with plain ends): 35mm, D90C-42 (90° elbow with plain ends): 42mm, D90C-54 (90° elbow with plain ends): 54mm, D90C-76.1 (90° elbow with plain ends): 76.1mm, D90C-88.9 (90° elbow with plain ends): 88.9mm, D90C-108 (90° elbow with plain ends): 108mm, DSQ-15 (Pipe bridge): 15mm, DSQ-18 (Pipe bridge): 18mm, DSQ-22 (Pipe bridge): 22mm, DSQ-28 (Pipe bridge): 28mm, DSQS-15 (Short pipe bridge): 15mm, DSQS-18 (Short pipe bridge): 18mm, DSQS-22 (Short pipe bridge): 22mm, DSQS-28 (Short pipe bridge): 28mm, DDGQ-12 (Single card pipe bridge): 12mm, DDGQ-15 (Single card pipe bridge): 15mm, DDGQ-18 (Single card pipe bridge): 18mm, DDGQ-22 (Single card pipe bridge): 22mm, DDGQ-28 (Single card pipe bridge): 28mm, D45-12 (45° elbow): 12mm, D45-15 (45° elbow): 15mm, D45-18 (45° elbow): 18mm, D45-22 (45° elbow): 22mm, D45-28 (45° elbow): 28mm, D45-35 (45° elbow): 35mm, D45-42 (45° elbow): 42mm, D45-54 (45° elbow): 54mm, D45-66.7 (45° elbow): 66.7mm, D45-76.1 (45° elbow): 76.1mm, D45-88.9 (45° elbow): 88.9mm, D45-108 (45° elbow): 108mm, D45D-12 (45° one-way elbow (long radius): 12mm, D45D-15 (45° one-way elbow (long radius): 15mm, D45D-18 (45° one-way elbow (long radius): 18mm, D45D-22 (45° one-way elbow (long radius): 22mm, D45D-28 (45° one-way elbow (long radius): 28mm, D45D-35 (45° one-way elbow (long radius): 35mm, D45D-42 (45° one-way elbow (long radius): 42mm, D45D-54 (45° one-way elbow (long radius): 54mm, D45D-66.7 (45° one-way elbow (long radius): 66.7mm, D45D-76.1 (45° one-way elbow (long radius): 76.1mm, D45D-88.9 (45° one-way elbow (long radius): 88.9mm, D45D-108 (45° one-way elbow (long radius): 108mm, D45DS-12 (45° one-way elbow (short radius): 12mm, D45DS-15 (45° one-way elbow (short radius): 15mm, D45DS-18 (45° one-way elbow (short radius): 18mm, D45DS-22 (45° one-way elbow (short radius): 22mm, D45DS-28 (45° one-way elbow (short radius): 28mm, D45DS-35 (45° one-way elbow (short radius): 35mm, D45DS-42 (45° one-way elbow (short radius): 42mm, D45DS-54 (45° one-way elbow (short radius): 54mm, D45DS-66.7 (45° one-way elbow (short radius): 66.7mm, D45DS-76.1 (45° one-way elbow (short radius): 76.1mm, D45DS-88.9 (45° one-way elbow (short radius): 88.9mm, D45DS-108 (45° one-way elbow (short radius): 108mm, D45R-22X18 (45° variable diameter elbow): 22X18mm, D90-12 (90° elbow): 12mm, D90-15 (90° elbow): 15mm, D90-18 (90° elbow): 18mm, D90-22 (90° elbow): 22mm, D90-28 (90° elbow): 28mm, D90-35 (90° elbow): 35mm, D90-42 (90° elbow): 42mm, D90-54 (90° elbow): 54mm, D90-66.7 (90° elbow): 66.7mm, D90-76.1 (90° elbow): 76.1mm, D90-88.9 (90° elbow): 88.9mm, D90-108 (90° elbow): 108mm, D90S-12 (90° elbow (short radius): 12mm, D90S-15 (90° elbow (short radius): 15mm, D90S-18 (90° elbow (short radius): 18mm, D90S-22 (90° elbow (short radius): 22mm, D90S-28 (90° elbow (short radius): 28mm, D90S-35 (90° elbow (short radius): 35mm, D90S-42 (90° elbow (short radius): 42mm, D90S-54 (90° elbow (short radius): 54mm, D90S-66.7 (90° elbow (short radius): 66.7mm, D90S-76.1 (90° elbow (short radius): 76.1mm, D90S-88.9 (90° elbow (short radius): 88.9mm, D90S-108 (90° elbow (short radius): 108mm, D90D-12 (90° one-way elbow (long radius): 12mm, D90D-15 (90° one-way elbow (long radius): 15mm, D90D-18 (90° one-way elbow (long radius): 18mm, D90D-22 (90° one-way elbow (long radius): 22mm, D90D-28 (90° one-way elbow (long radius): 28mm, D90D-35 (90° one-way elbow (long radius): 35mm, D90D-42 (90° one-way elbow (long radius): 42mm, D90D-54 (90° one-way elbow (long radius): 54mm, D90D-66.7 (90° one-way elbow (long radius): 66.7mm, D90D-76.1 (90° one-way elbow (long radius): 76.1mm, D90D-88.9 (90° one-way elbow (long radius): 88.9mm, D90D-108 (90° one-way elbow (long radius): 108mm, D90DS-12 (90° one-way elbow (short radius): 12mm, D90DS-15 (90° one-way elbow (short radius): 15mm, D90DS-18 (90° one-way elbow (short radius): 18mm, D90DS-22 (90° one-way elbow (short radius): 22mm, D90DS-28 (90° one-way elbow (short radius): 28mm, D90DS-35 (90° one-way elbow (short radius): 35mm, D90DS-42 (90° one-way elbow (short radius): 42mm, D90DS-54 (90° one-way elbow (short radius): 54mm, D90DS-66.7 (90° one-way elbow (short radius): 66.7mm, D90DS-76.1 (90° one-way elbow (short radius): 76.1mm, D90DS-88.9 (90° one-way elbow (short radius): 88.9mm, D90DS-108 (90° one-way elbow (short radius): 108mm, D90R-22X18 (90° variable diameter elbow): 22X18mm, D90R-28X18 (90° variable diameter elbow): 28X18mm, D90R-28X22 (90° variable diameter elbow): 28X22mm, D90R-35X22 (90° variable diameter elbow): 35X22mm, D90R-35X28 (90° variable diameter elbow): 35X28mm, D90R-42X22 (90° variable diameter elbow): 42X22mm, D90R-42X28 (90° variable diameter elbow): 42X28mm, D90R-42X35 (90° variable diameter elbow): 42X35mm, D90R-54X22 (90° variable diameter elbow): 54X22mm, D90R-54X28 (90° variable diameter elbow): 54X28mm, D90R-54X35 (90° variable diameter elbow): 54X35mm, D90R-54X42 (90° variable diameter elbow): 54X42mm, D90F-15-15 (90° elbow with female thread): 15-15mm, D90F-18-15 (90° elbow with female thread): 18-15mm, D90F-22-20 (90° elbow with female thread): 22-20mm, D90F-28-25 (90° elbow with female thread): 28-25mm, D90F-35-32 (90° elbow with female thread): 35-32mm, D90F-42-40 (90° elbow with female thread): 42-40mm, D90F-54-50 (90° elbow with female thread): 54-50mm, D90RF-15-10 (90° reducing elbow with female thread): 15-10mm, D90RF-22-15 (90° reducing elbow with female thread): 22-15mm, D90RF-28-15 (90° reducing elbow with female thread): 28-15mm, D90RF-28-20 (90° reducing elbow with female thread): 28-20mm, D90RF-35-15 (90° reducing elbow with female thread): 35-15mm, D90RF-35-25 (90° reducing elbow with female thread): 35-25mm, D90RF-42-32 (90° reducing elbow with female thread): 42-32mm, D90RF-54-40 (90° reducing elbow with female thread): 54-40mm, D90M-15-15 (90° external thread elbow): 15-15mm, D90M-18-15 (90° external thread elbow): 18-15mm, D90M-22-20 (90° external thread elbow): 22-20mm, D90M-28-25 (90° external thread elbow): 28-25mm, D90M-35-32 (90° external thread elbow): 35-32mm, D90M-42-40 (90° external thread elbow): 42-40mm, D90M-54-50 (90° external thread elbow): 54-50mm, D90RM-15-10 (90° reducing elbow with male thread): 15-10mm, D90RM-22-15 (90° reducing elbow with male thread): 22-15mm, D90RM-28-15 (90° reducing elbow with male thread): 28-15mm, D90RM-35-15 (90° reducing elbow with male thread): 35-15mm, D90RM-35-25 (90° reducing elbow with male thread): 35-25mm, D90RM-42-32 (90° reducing elbow with male thread): 42-32mm, D90RM-54-40 (90° reducing elbow with male thread): 54-40mm, D90FZ-15-15 (90° short elbow with female thread): 15-15mm, D90FZ-18-15 (90° short elbow with female thread): 18-15mm, D90FZ-22-20 (90° short elbow with female thread): 22-20mm, D90FZ-28-25 (90° short elbow with female thread): 28-25mm, D90FZ-35-32 (90° short elbow with female thread): 35-32mm, D90RFZ-15-20 (90° short structure variable diameter elbow): 15-20mm, D90RFZ-18-20 (90° short structure variable diameter elbow): 18-20mm, D90RFZ-22-15 (90° short structure variable diameter elbow): 22-15mm, D90RFZ-22-25 (90° short structure variable diameter elbow): 22-25mm, D90RFZ-28-15 (90° short structure variable diameter elbow): 28-15mm, D90FCB-15-15 (90° bearing plate elbow with female thread): 15-15mm, D90FCB-18-15 (90° bearing plate elbow with female thread): 18-15mm, D90FCB-22-20 (90° bearing plate elbow with female thread): 22-20mm, D90FCBL-15-15 (90° Female Elbow with Long wall Plate): 15-15mm, D90FCBL-18-15 (90° Female Elbow with Long wall Plate): 18-15mm, D90FCBL-22-20 (90° Female Elbow with Long wall Plate): 22-20mm, D90FZP-15-15 (90° Female Elbow with Seat Plate): 15-15mm, D90FZP-18-15 (90° Female Elbow with Seat Plate): 18-15mm, D90FZP-22-20 (90° Female Elbow with Seat Plate): 22-20mm, DM90F-15-15 (Double Tap Connector 90°/90° with Female Thread): 15-15mm, D90MZ-15-15 (90° short elbow with male thread): 15-15mm, D90MZ-18-15 (90° short elbow with male thread): 18-15mm, D90MZ-22-20 (90° short elbow with male thread): 22-20mm, D90MZ-28-25 (90° short elbow with male thread): 28-25mm, D90MZ-35-32 (90° short elbow with male thread): 35-32mm, D90MZ-42-40 (90° short elbow with male thread): 42-40mm, D90MZ-54-50 (90° short elbow with male thread): 54-50mm, D90RMZ-18-20 (90° reducing short elbow with male thread): 18-20mm, DL-15 (Flange): 15mm, DL-18 (Flange): 18mm, DL-22 (Flange): 22mm, DL-28 (Flange): 28mm, DL-35 (Flange): 35mm, DL-42 (Flange): 42mm, DL-54 (Flange): 54mm, DL-76.1 (Flange): 76.1mm, DL-88.9 (Flange): 88.9mm, DL-108 (Flange): 108mm, DDSL-15 (Adaptador flange): 15mm, DDSL-18 (Adaptador flange): 18mm, DDSL-22 (Adaptador flange): 22mm, DDSL-28 (Adaptador flange): 28mm, DDSL-35 (Adaptador flange): 35mm, DDSL-42 (Adaptador flange): 42mm, DDSL-54 (Adaptador flange): 54mm, DDSL-66.7 (Adaptador flange): 66.7mm, DDSL-76.1 (Adaptador flange): 76.1mm, DDSL-88.9 (Adaptador flange): 88.9mm, DDSL-108 (Adaptador flange): 108mm, DSS-22 (Flexible coupling): 22mm, DSFC-12-15 (Straight pipe with female thread): 12-15mm, DSFC-15-15 (Straight pipe with female thread): 15-15mm, DSFC-18-15 (Straight pipe with female thread): 18-15mm, DSFC-18-20 (Straight pipe with female thread): 18-20mm, DSFC-22-15 (Straight pipe with female thread): 22-15mm, DSFC-22-20 (Straight pipe with female thread): 22-20mm, DSFC-42-40 (Straight pipe with female thread): 42-40mm, DSFC-28-20 (Straight pipe with female thread): 28-20mm, DSFC-28-25 (Straight pipe with female thread): 28-25mm, DSFC-35-32 (Straight pipe with female thread): 35-32mm, DSFC-54-50 (Straight pipe with female thread): 54-50mm, DSMC-15-15 (Straight pipe with male thread): 15-15mm, DSMC-18-15 (Straight pipe with male thread): 18-15mm, DSMC-18-20 (Straight pipe with male thread): 18-20mm, DSMC-22-15 (Straight pipe with male thread): 22-15mm, DSMC-22-20 (Straight pipe with male thread): 22-20mm, DSMC-22-25 (Straight pipe with male thread): 22-25mm, DSMC-28-20 (Straight pipe with male thread): 28-20mm, DSMC-28-25 (Straight pipe with male thread): 28-25mm, DSMC-28-32 (Straight pipe with male thread): 28-32mm, DSMC-35-32 (Straight pipe with male thread): 35-32mm, DSMC-42-40 (Straight pipe with male thread): 42-40mm, DSMC-54-50 (Straight pipe with male thread): 54-50mm, DDS-12 (Coupling): 12mm, DDS-15 (Coupling): 15mm, DDS-18 (Coupling): 18mm, DDS-22 (Coupling): 22mm, DDS-28 (Coupling): 28mm, DDS-35 (Coupling): 35mm, DDS-42 (Coupling): 42mm, DDS-54 (Coupling): 54mm, DDS-66.7 (Coupling): 66.7mm, DDS-76.1 (Coupling): 76.1mm, DDS-88.9 (Coupling): 88.9mm, DDS-108 (Coupling): 108mm, DSK-12 (Coupling without stop): 12mm, DSK-15 (Coupling without stop): 15mm, DSK-18 (Coupling without stop): 18mm, DSK-22 (Coupling without stop): 22mm, DSK-28 (Coupling without stop): 28mm, DSK-35 (Coupling without stop): 35mm, DSK-42 (Coupling without stop): 42mm, DSK-54 (Coupling without stop): 54mm, DSK-66.7 (Coupling without stop): 66.7mm, DSK-76.1 (Coupling without stop): 76.1mm, DSK-88.9 (Coupling without stop): 88.9mm, DSK-108 (Coupling without stop): 108mm, DSF-15-15 (Female thread coupling): 15-15mm, DSF-18-15 (Female thread coupling): 18-15mm, DSF-22-20 (Female thread coupling): 22-20mm, DSF-28-25 (Female thread coupling): 28-25mm, DSF-35-32 (Female thread coupling): 35-32mm, DSF-42-40 (Female thread coupling): 42-40mm, DSF-54-50 (Female thread coupling): 54-50mm, DSF-108-100 (Female thread coupling): 108-100mm, DSF-76.1-65 (Female thread coupling): 76.1-65mm, DSF-88.9-80 (Female thread coupling): 88.9-80mm, DSRF-12-15 (Female thread reducing coupling): 12-15mm, DSRF-15-10 (Female thread reducing coupling): 15-10mm, DSRF-15-20 (Female thread reducing coupling): 15-20mm, DSRF-18-20 (Female thread reducing coupling): 18-20mm, DSRF-22-15 (Female thread reducing coupling): 22-15mm, DSRF-22-25 (Female thread reducing coupling): 22-25mm, DSRF-28-15 (Female thread reducing coupling): 28-15mm, DSRF-28-20 (Female thread reducing coupling): 28-20mm, DSRF-28-32 (Female thread reducing coupling): 28-32mm, DSRF-35-20 (Female thread reducing coupling): 35-20mm, DSRF-35-25 (Female thread reducing coupling): 35-25mm, DSRF-35-40 (Female thread reducing coupling): 35-40mm, DSRF-42-32 (Female thread reducing coupling): 42-32mm, DSRF-42-50 (Female thread reducing coupling): 42-50mm, DSRF-54-40 (Female thread reducing coupling): 54-40mm, DSRF-76.1-40 (Female thread reducing coupling): 76.1-40mm, DSM-12-10 (Male thread coupling): 12-10mm, DSM-15-15 (Male thread coupling): 15-15mm, DSM-18-15 (Male thread coupling): 18-15mm, DSM-22-20 (Male thread coupling): 22-20mm, DSM-28-25 (Male thread coupling): 28-25mm, DSM-35-32 (Male thread coupling): 35-32mm, DSM-42-40 (Male thread coupling): 42-40mm, DSM-54-50 (Male thread coupling): 54-50mm, DSM-76.1-65 (Male thread coupling): 76.1-65mm, DSM-88.9-80 (Male thread coupling): 88.9-80mm, DSM-108-100 (Male thread coupling): 108-100mm, DSRM-12-15 (Male thread reducing coupling): 12-15mm, DSRM-15-10 (Male thread reducing coupling): 15-10mm, DSRM-15-20 (Male thread reducing coupling): 15-20mm, DSRM-18-20 (Male thread reducing coupling): 18-20mm, DSRM-22-15 (Male thread reducing coupling): 22-15mm, DSRM-22-25 (Male thread reducing coupling): 22-25mm, DSRM-28-20 (Male thread reducing coupling): 28-20mm, DSRM-28-32 (Male thread reducing coupling): 28-32mm, DSRM-35-15 (Male thread reducing coupling): 35-15mm, DSRM-35-25 (Male thread reducing coupling): 35-25mm, DSRM-35-40 (Male thread reducing coupling): 35-40mm, DSRM-42-32 (Male thread reducing coupling): 42-32mm, DSRM-54-40 (Male thread reducing coupling): 54-40mm, DSRM-66.7-65 (Male thread reducing coupling): 66.7-65mm, DSR-22X15 (Reducing coupling): 22X15mm, DSR-22X18 (Reducing coupling): 22X18mm, DSR-28X15 (Reducing coupling): 28X15mm, DSR-28X18 (Reducing coupling): 28X18mm, DSR-28X22 (Reducing coupling): 28X22mm, DSR-35X18 (Reducing coupling): 35X18mm, DSR-35X22 (Reducing coupling): 35X22mm, DSR-35X28 (Reducing coupling): 35X28mm, DSR-42X18 (Reducing coupling): 42X18mm, DSR-42X22 (Reducing coupling): 42X22mm, DSR-42X28 (Reducing coupling): 42X28mm, DSR-42X35 (Reducing coupling): 42X35mm, DSR-54X18 (Reducing coupling): 54X18mm, DSR-54X22 (Reducing coupling): 54X22mm, DSR-54X28 (Reducing coupling): 54X28mm, DSR-54X35 (Reducing coupling): 54X35mm, DSR-54X42 (Reducing coupling): 54X42mm, DSR-76.1X35 (Reducing coupling): 76.1X35mm, DSR-76.1X42 (Reducing coupling): 76.1X42mm, DSR-76.1X54 (Reducing coupling): 76.1X54mm, DSR-88.9X42 (Reducing coupling): 88.9X42mm, DSR-88.9X54 (Reducing coupling): 88.9X54mm, DSR-88.9X76.1 (Reducing coupling): 88.9X76.1mm, DSR-108X54 (Reducing coupling): 108X54mm, DSR-108X76.1 (Reducing coupling): 108X76.1mm, DSR-108X88.9 (Reducing coupling): 108X88.9mm, DSRCK-12X15 (Reducer with plain end): 12X15mm, DSRCK-12X18 (Reducer with plain end): 12X18mm, DSRCK-12X22 (Reducer with plain end): 12X22mm, DSRCK-12X28 (Reducer with plain end): 12X28mm, DSRCK-15X18 (Reducer with plain end): 15X18mm, DSRCK-15X22 (Reducer with plain end): 15X22mm, DSRCK-15X28 (Reducer with plain end): 15X28mm, DSRCK-15X35 (Reducer with plain end): 15X35mm, DSRCK-15X42 (Reducer with plain end): 15X42mm, DSRCK-15X54 (Reducer with plain end): 15X54mm, DSRCK-18X22 (Reducer with plain end): 18X22mm, DSRCK-18X28 (Reducer with plain end): 18X28mm, DSRCK-18X35 (Reducer with plain end): 18X35mm, DSRCK-18X42 (Reducer with plain end): 18X42mm, DSRCK-18X54 (Reducer with plain end): 18X54mm, DSRCK-22X28 (Reducer with plain end): 22X28mm, DSRCK-22X35 (Reducer with plain end): 22X35mm, DSRCK-22X42 (Reducer with plain end): 22X42mm, DSRCK-22X54 (Reducer with plain end): 22X54mm, DSRCK-28X35 (Reducer with plain end): 28X35mm, DSRCK-28X42 (Reducer with plain end): 28X42mm, DSRCK-28X54 (Reducer with plain end): 28X54mm, DSRCK-28X66.7 (Reducer with plain end): 28X66.7mm, DSRCK-35X42 (Reducer with plain end): 35X42mm, DSRCK-35X54 (Reducer with plain end): 35X54mm, DSRCK-35X66.7 (Reducer with plain end): 35X66.7mm, DSRCK-42X54 (Reducer with plain end): 42X54mm, DSRCK-42X66.7 (Reducer with plain end): 42X66.7mm, DSRCK-42X76.1 (Reducer with plain end): 42X76.1mm, DSRCK-54X66.7 (Reducer with plain end): 54X66.7mm, DSRCK-54X76.1 (Reducer with plain end): 54X76.1mm, DSRCK-54X88.9 (Reducer with plain end): 54X88.9mm, DSRCK-54X108 (Reducer with plain end): 54X108mm, DSRCK-66.7X76.1 (Reducer with plain end): 66.7X76.1mm, DSRCK-66.7X88.9 (Reducer with plain end): 66.7X88.9mm, DSRCK-66.7X108 (Reducer with plain end): 66.7X108mm, DSRCK-76.1X108 (Reducer with plain end): 76.1X108mm, DSRCK-76.1X88.9 (Reducer with plain end): 76.1X88.9mm, DSRCK-88.9X108 (Reducer with plain end): 88.9X108mm, DSRCK-108X168.3 (Reducer with plain end): 108X168.3mm, DSHJRM-15-20 (Variable diameter outer silk alive joint): 15-20mm, DSHJRM-18-20 (Variable diameter outer silk alive joint): 18-20mm, DSHJRM-22-15 (Variable diameter outer silk alive joint): 22-15mm, DSHJRM-22-25 (Variable diameter outer silk alive joint): 22-25mm, DSHJRM-28-32 (Variable diameter outer silk alive joint): 28-32mm, DHF-15-15 (Moveable union): 15-15mm, DHF-18-15 (Moveable union): 18-15mm, DHF-22-20 (Moveable union): 22-20mm, DHF-28-25 (Moveable union): 28-25mm, DHF-35-32 (Moveable union): 35-32mm, DHF-42-40 (Moveable union): 42-40mm, DHF-54-50 (Moveable union): 54-50mm, DHF-76.1-65 (Moveable union): 76.1-65mm, DHRF-15-20 (Reducing moveable union): 15-20mm, DHRF-18-20 (Reducing moveable union): 18-20mm, DHRF-22-15 (Reducing moveable union): 22-15mm, DHRF-22-25 (Reducing moveable union): 22-25mm, DHRF-28-32 (Reducing moveable union): 28-32mm, DHRF-35-40 (Reducing moveable union): 35-40mm, DHRF-42-G1 3/4 (Reducing moveable union): 42-G1 3/4mm, DHRF-42-50 (Reducing moveable union): 42-50mm, DHRF-54-65 (Reducing moveable union): 54-65mm, DHRF-54-G2 3/8 (Reducing moveable union): 54-G2 3/8mm, D3T-12X12X12 (Equal tee): 12X12X12mm, D3T-15X15X15 (Equal tee): 15X15X15mm, D3T-18X18X18 (Equal tee): 18X18X18mm, D3T-22X22X22 (Equal tee): 22X22X22mm, D3T-28X28X28 (Equal tee): 28X28X28mm, D3T-35X35X35 (Equal tee): 35X35X35mm, D3T-42X42X42 (Equal tee): 42X42X42mm, D3T-54X54X54 (Equal tee): 54X54X54mm, D3T-66.7X66.7X66.7 (Equal tee): 66.7X66.7X66.7mm, D3T-76.1X76.1X76.1 (Equal tee): 76.1X76.1X76.1mm, D3T-88.9X88.9X88.9 (Equal tee): 88.9X88.9X88.9mm, D3T-108X108X108 (Equal tee): 108X108X108mm, DTF-15-15X15 (Female thread equal tee): 15-15X15mm, DTF-18-15X18 (Female thread equal tee): 18-15X18mm, DTF-22-20X22 (Female thread equal tee): 22-20X22mm, DTF-28-25X28 (Female thread equal tee): 28-25X28mm, DTF-35-32X35 (Female thread equal tee): 35-32X35mm, DTF-42-40X42 (Female thread equal tee): 42-40X42mm, DTF-54-50X54 (Female thread equal tee): 54-50X54mm, DTRF-18-20X18 (Reducing tee with female thread branch): 18-20X18mm, DTRF-22-15X22 (Reducing tee with female thread branch): 22-15X22mm, DTRF-28-15X28 (Reducing tee with female thread branch): 28-15X28mm, DTRF-28-20X28 (Reducing tee with female thread branch): 28-20X28mm, DTRF-35-15X35 (Reducing tee with female thread branch): 35-15X35mm, DTRF-35-20X35 (Reducing tee with female thread branch): 35-20X35mm, DTRF-35-25X35 (Reducing tee with female thread branch): 35-25X35mm, DTRF-42-15X42 (Reducing tee with female thread branch): 42-15X42mm, DTRF-42-20X42 (Reducing tee with female thread branch): 42-20X42mm, DTRF-42-25X42 (Reducing tee with female thread branch): 42-25X42mm, DTRF-42-32X42 (Reducing tee with female thread branch): 42-32X42mm, DTRF-54-15X54 (Reducing tee with female thread branch): 54-15X54mm, DTRF-54-20X54 (Reducing tee with female thread branch): 54-20X54mm, DTRF-54-25X54 (Reducing tee with female thread branch): 54-25X54mm, DTRF-54-32X54 (Reducing tee with female thread branch): 54-32X54mm, DTRF-54-40X54 (Reducing tee with female thread branch): 54-40X54mm, DTRF-66.7-20X66.7 (Reducing tee with female thread branch): 66.7-20X66.7mm, DTRF-76.1-20X76.1 (Reducing tee with female thread branch): 76.1-20X76.1mm, DTRF-76.1-50X76.1 (Reducing tee with female thread branch): 76.1-50X76.1mm, DTRF-88.9-20X88.9 (Reducing tee with female thread branch): 88.9-20X88.9mm, DTRF-88.9-50X88.9 (Reducing tee with female thread branch): 88.9-50X88.9mm, DTRF-108-20X108 (Reducing tee with female thread branch): 108-20X108mm, DTRF-108-50X108 (Reducing tee with female thread branch): 108-50X108mm, DTM-15-15X15 (Male thread equal tee): 15-15X15mm, DTM-18-15X18 (Male thread equal tee): 18-15X18mm, DTM-22-20X22 (Male thread equal tee): 22-20X22mm, DTM-28-25X28 (Male thread equal tee): 28-25X28mm, DTM-35-32X35 (Male thread equal tee): 35-32X35mm, DTM-42-40X42 (Male thread equal tee): 42-40X42mm, DTM-54-50X54 (Male thread equal tee): 54-50X54mm, DTRM-22-25X22 (Reducing tee with male thread branch): 22-25X22mm, DTRM-22-15X22 (Reducing tee with male thread branch): 22-15X22mm, DTRM-28-15X28 (Reducing tee with male thread branch): 28-15X28mm, DTRM-28-20X28 (Reducing tee with male thread branch): 28-20X28mm, DTRM-35-20X35 (Reducing tee with male thread branch): 35-20X35mm, DTRM-35-25X35 (Reducing tee with male thread branch): 35-25X35mm, DTRM-35-40X35 (Reducing tee with male thread branch): 35-40X35mm, DTRM-42-20X42 (Reducing tee with male thread branch): 42-20X42mm, DTRM-42-25X42 (Reducing tee with male thread branch): 42-25X42mm, DTRM-42-32X42 (Reducing tee with male thread branch): 42-32X42mm, DTRM-54-25X54 (Reducing tee with male thread branch): 54-25X54mm, DTRM-54-40X54 (Reducing tee with male thread branch): 54-40X54mm, DTR-15X12X15 (Reducing tee): 15X12X15mm, DTR-15X18X15 (Reducing tee): 15X18X15mm, DTR-15X22X15 (Reducing tee): 15X22X15mm, DTR-18X15X15 (Reducing tee): 18X15X15mm, DTR-18X12X18 (Reducing tee): 18X12X18mm, DTR-18X15X18 (Reducing tee): 18X15X18mm, DTR-18X22X18 (Reducing tee): 18X22X18mm, DTR-22X12X22 (Reducing tee): 22X12X22mm, DTR-22X15X15 (Reducing tee): 22X15X15mm, DTR-22X18X18 (Reducing tee): 22X18X18mm, DTR-22X28X22 (Reducing tee): 22X28X22mm, DTR-22X15X22 (Reducing tee): 22X15X22mm, DTR-22X18X22 (Reducing tee): 22X18X22mm, DTR-28X15X28 (Reducing tee): 28X15X28mm, DTR-28X18X28 (Reducing tee): 28X18X28mm, DTR-28X22X22 (Reducing tee): 28X22X22mm, DTR-28X22X28 (Reducing tee): 28X22X28mm, DTR-35X15X35 (Reducing tee): 35X15X35mm, DTR-35X18X35 (Reducing tee): 35X18X35mm, DTR-35X22X35 (Reducing tee): 35X22X35mm, DTR-35X28X35 (Reducing tee): 35X28X35mm, DTR-42X15X42 (Reducing tee): 42X15X42mm, DTR-42X18X42 (Reducing tee): 42X18X42mm, DTR-42X22X42 (Reducing tee): 42X22X42mm, DTR-42X28X35 (Reducing tee): 42X28X35mm, DTR-42X28X42 (Reducing tee): 42X28X42mm, DTR-42X35X42 (Reducing tee): 42X35X42mm, DTR-42X54X42 (Reducing tee): 42X54X42mm, DTR-54X15X54 (Reducing tee): 54X15X54mm, DTR-54X18X54 (Reducing tee): 54X18X54mm, DTR-54X22X54 (Reducing tee): 54X22X54mm, DTR-54X28X54 (Reducing tee): 54X28X54mm, DTR-54X35X54 (Reducing tee): 54X35X54mm, DTR-54X42X54 (Reducing tee): 54X42X54mm, DTR-66.7X22X66.7 (Reducing tee): 66.7X22X66.7mm, DTR-66.7X28X66.7 (Reducing tee): 66.7X28X66.7mm, DTR-66.7X35X66.7 (Reducing tee): 66.7X35X66.7mm, DTR-66.7X42X66.7 (Reducing tee): 66.7X42X66.7mm, DTR-66.7X54X66.7 (Reducing tee): 66.7X54X66.7mm, DTR-76.1X22X76.1 (Reducing tee): 76.1X22X76.1mm, DTR-76.1X28X76.1 (Reducing tee): 76.1X28X76.1mm, DTR-76.1X35X76.1 (Reducing tee): 76.1X35X76.1mm, DTR-76.1X42X76.1 (Reducing tee): 76.1X42X76.1mm, DTR-76.1X54X76.1 (Reducing tee): 76.1X54X76.1mm, DTR-76.1X66.7X76.1 (Reducing tee): 76.1X66.7X76.1mm, DTR-88.9X22X88.9 (Reducing tee): 88.9X22X88.9mm, DTR-88.9X28X88.9 (Reducing tee): 88.9X28X88.9mm, DTR-88.9X35X88.9 (Reducing tee): 88.9X35X88.9mm, DTR-88.9X42X88.9 (Reducing tee): 88.9X42X88.9mm, DTR-88.9X54X88.9 (Reducing tee): 88.9X54X88.9mm, DTR-88.9X66.7X88.9 (Reducing tee): 88.9X66.7X88.9mm, DTR-88.9X76.1X88.9 (Reducing tee): 88.9X76.1X88.9mm, DTR-108X22X108 (Reducing tee): 108X22X108mm, DTR-108X28X108 (Reducing tee): 108X28X108mm, DTR-108X35X108 (Reducing tee): 108X35X108mm, DTR-108X42X108 (Reducing tee): 108X42X108mm, DTR-108X54X108 (Reducing tee): 108X54X108mm, DTR-108X66.7X108 (Reducing tee): 108X66.7X108mm, DTR-108X76.1X108 (Reducing tee): 108X76.1X108mm, DTR-108X88.9X108 (Reducing tee): 108X88.9X108mm, DTR-28X35X28 (Reducing tee): 28X35X28mm, DTR-28X42X28 (Reducing tee): 28X42X28mm, DTR-35X28X28 (Reducing tee): 35X28X28mm, DTR-35X42X35 (Reducing tee): 35X42X35mm, DTR-35X54X35 (Reducing tee): 35X54X35mm, DTR-54X35X28 (Reducing tee): 54X35X28mm, DTR-54X42X35 (Reducing tee): 54X42X35mm, DTR-54X42X42 (Reducing tee): 54X42X42mm, DMTF-15-15X15 (Misaligned T-piece): 15-15X15mm, DTFZP-18-15X18 (Chassis tee joint): 18-15X18mm, DTFZP-22-15X22 (Chassis tee joint): 22-15X22mm, D4T-22X22X22X22 (Equal cross): 22X22X22X22mm, D4T-28X28X28X28 (Equal cross): 28X28X28X28mm, D4T-35X35X35X35 (Equal cross): 35X35X35X35mm, D4T-42X42X42X42 (Equal cross): 42X42X42X42mm, D4T-54X54X54X54 (Equal cross): 54X54X54X54mm, D4T-76.1X76.1X76.1X76.1 (Equal cross): 76.1X76.1X76.1X76.1mm, D4TR-28X22X28X22 (Reducing cross): 28X22X28X22mm, D4TR-35X22X35X22 (Reducing cross): 35X22X35X22mm, D4TR-35X28X35X28 (Reducing cross): 35X28X35X28mm, D4TR-42X22X42X22 (Reducing cross): 42X22X42X22mm, D4TR-42X28X42X28 (Reducing cross): 42X28X42X28mm, D4TR-42X35X42X35 (Reducing cross): 42X35X42X35mm, D4TR-54X22X54X22 (Reducing cross): 54X22X54X22mm, D4TR-54X28X54X28 (Reducing cross): 54X28X54X28mm, D4TR-54X35X54X35 (Reducing cross): 54X35X54X35mm, D4TR-54X42X54X42 (Reducing cross): 54X42X54X42mm, D4TF-22-20X22-20 (Female thread equal cross): 22-20X22-20mm, D4TF-28-25X28-25 (Female thread equal cross): 28-25X28-25mm, D4TF-35-32X35-32 (Female thread equal cross): 35-32X35-32mm, D4TF-42-40X42-40 (Female thread equal cross): 42-40X42-40mm, D4TRF-22-15X22-15 (reducing cross with female thread): 22-15X22-15mm, D4TRF-54-40X54-40 (reducing cross with female thread): 54-40X54-40mm. DDC-12 (End cap): 12mm, DDC-15 (End cap): 15mm, DDC-18 (End cap): 18mm, DDC-22 (End cap): 22mm, DDC-28 (End cap): 28mm, DDC-35 (End cap): 35mm, DDC-42 (End cap): 42mm, DDC-54 (End cap): 54mm, DDC-66.7 (End cap): 66.7mm, DDC-76.1 (End cap): 76.1mm, DDC-88.9 (End cap): 88.9mm, DDC-108 (End cap): 108mm. Pipe: N·U Series 1 N·U Series 2

Approval Holder:

Meide Archung (Jinan) Piping Industry Co., Ltd.

Company Name

Meide Archung (Jinan) Piping Industry Co., Ltd.

Address

No.49, Huxi Street North Side, Jinshui Subdistrict, Pingyin County, Jinan, Shandong

Country

China

View All Listings by this Company

Range of stainless-steel(SS304L) press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

MTF, model number, Size on fitting

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Marla Tube Fittings Limited

Company Name

Marla Tube Fittings Limited

Address

Kinwarton Farm Road Alcester

Postcode

B49 6EH

Country

United Kingdom

Phone

01789 761207

General Email

graham.walker@marla.co.uk

View All Listings by this Company

Range of green Sappro butt-welded polypropylene fittings for use with Sappro PPR pipes. Maximum working pressure: 20 Bar. Maximum operating temperature: 23°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250802006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sappro logo and size on body. Sappro logo, ISO 15874-2 and size on pipe body

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Pipe: SFP6285205000015 20 mm SFP6285205000022 25 mm SFP6285205000039 32 mm SFP6285205000046 40 mm SFP6285205000053 50 mm SFP6285205000060 63 mm SFP6285205000077 75 mm SFP6285205000084 90 mm Elbow 90°: SFP6285205002613 20 mm SFP6285205002620 25 mm SFP6285205002637 32 mm SFP6285205002644 40 mm SFP6285205002651 50 mm SFP6285205002668 63 mm SFP6285205002675 75 mm SFP6285205002682 90 mm Elbow 45°: SFP6285205002798 20 mm SFP6285205002804 25 mm SFP6285205002811 32 mm SFP6285205003030 40 mm SFP6285205003047 50 mm SFP6285205003054 63 mm SFP6285205003061 75 mm SFP6285205003078 90 mm Equal Tee: SFP6285205003566 20 mm SFP6285205003573 25 mm SFP6285205003580 32 mm SFP6285205003597 40 mm SFP6285205003603 50 mm SFP6285205003610 63 mm SFP6285205003627 75 mm SFP6285205003634 90 mm Socket: SFP6285205003221 20 mm SFP6285205003238 25 mm SFP6285205003245 32 mm SFP6285205003252 40 mm SFP6285205003269 50 mm SFP6285205003276 63 mm SFP6285205003283 75 mm SFP6285205003290 90 mm Bridge Bend: SFP6285205001593 20mm SFP6285205001609 25mm SFP6285205001616 32mm Socket Bridge Bend: SFP6285205002033 25mm End Cap: SFP6285205003740 20mm SFP6285205003962 25mm SFP6285205003979 32mm SFP6285205003986 40mm SFP6285205003993 50mm SFP6285205004006 63mm SFP6285205004013 75mm SFP6285205004020 90mm Male Plug: SFP6285205004136 20mm Reducer Socket: SFP6285205007267 25mm x 20mm SFP6285205007281 32mm x 25mm SFP6285205007274 32mm x 20mm SFP6285205007304 40mm x 25mm SFP6285205007311 40mm x 32mm SFP6285205007313 50mm x 25mm SFP6285205007314 50mm x 32mm SFP6285205007315 50mm x 40mm SFP6285205007317 63mm x 25mm SFP6285205007318 63mm x 32mm SFP6285205007319 63mm x 40mm SFP6285205007320 63mm x 50mm Reducer: SFP6285205005331 75mm x 32mm SFP6285205005348 75mm x 40mm SFP6285205005355 75mm x 50mm SFP6285205005362 75mm x 63mm Reducer Tee: SFP6285205005911 25mm x 20mm SFP6285205006208 32mm x 25mm SFP6285205006222 40mm x 25mm SFP6285205006239 40mm x 32mm SFP6285205006604 50mm x 25mm SFP6285205006628 50mm x 32mm SFP6285205006642 63mm x 25mm SFP6285205006666 63mm x 32mm SFP6285205006673 63mm x 40mm SFP6285205006697 75mm x 32mm SFP6285205006703 75mm x 40mm SFP6285205006710 75mm x 50mm SFP6285205006727 75mm x 63mm Female Socket: SFP6285205007625 20mm x 1/2" BSP (F) SFP6285205007626 20mm x 3/4" BSP (F) SFP6285205007627 25mm x 1/2" BSP (F) SFP6285205007628 25mm x 3/4" BSP (F) SFP6285205007629 32mm x 1/2" BSP (F) SFP6285205007630 32mm x 3/4" BSP (F) SFP6285205007631 32mm x 1" BSP (F) Male Socket: SFP6285205007660 20mm x 1/2" BSP (M) SFP6285205007661 20mm x 3/4" BSP (M) SFP6285205007662 25mm x 1/2" BSP (M) SFP6285205007663 25mm x 3/4" BSP (M) SFP6285205007664 32mm x 1/2" BSP (M) SFP6285205007665 32mm x 3/4" BSP (M) Female Double Tee: SFP6285205007458 25mm x 1/2" BSP (F) Female Elbow: SFP6285205008039 20mm x 1/2" BSP (F) SFP6285205008041 25mm x 1/2" BSP (F) SFP6285205008042 25mm x 3/4" BSP (F) SFP6285205008043 32mm x 1/2" BSP (F) SFP6285205008044 32mm x 3/4" BSP (F) SFP6285205008045 32mm x 1" BSP (F) Male Elbow: SFP6285205008055 25mm x 1/2" BSP (M) SFP6285205008056 25mm x 3/4" BSP (M) SFP6285205008058 32mm x 1" BSP (M) Male Hexagon: SFP6285205008025 32mm x 1" BSP (M) SFP6285205008027 40mm x 1 1/4" BSP (M) SFP6285205008028 50mm x 1 1/2" BSP (M) SFP6285205008029 63mm x 2" BSP (M) SFP6285205008030 75mm x 2 1/2" BSP (M) SFP6285205008031 90mm x 3" BSP (M) Female Tee: SFP6285205007599 25mm x 1/2" BSP (F) SFP6285205007600 25mm x 3/4" BSP (F) SFP6285205007601 32mm x 1/2" BSP (F) SFP6285205007602 32mm x 3/4" BSP (F) SFP6285205007603 32mm x 1" BSP (F)

Approval Holder:

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Company Name

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Address

Albjadiya Industrial RIYADH

Country

Saudi Arabia

View All Listings by this Company

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with Mingshi (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304383

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Fitting: Mingshi and size on body. Pipe: Mingshi, Mingshi logo, WRAS, size, length, temperature, pressure, date of manufacture (DD/MM/YYYY) and ISO standard on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

Straight: PS16X16 PS20X20 PS25X25 PS32X32 Reduced straight: PS20X16 PS25X16 PS25X20 PS32X16 PS32X20 PS32X25 Male straight: PS16X1/2M PS16X3/4M PS20X1/2M PS20X3/4M PS20x1M PS25x1/2M PS25X3/4M PS25X1M PS32x1/2M PS32X3/4M PS32X1M PS32x11/4M PS32x11/2M Female straight: PS16X1/2F PS16X3/4F PS16X1F PS20X1/2F PS20X3/4F PS20x1F PS25X1/2F PS25X3/4F PS25X1F PS32x1/2F PS32X3/4F PS32X1F PS32X11/4F PS32x11/2F Elbow: PL16X16 PL20X20 PL25x25 PL32X32 Male elbow: PL16X1/2M PL16X3/4M PL20X1/2M PL20X3/4M PL20x1M PL25X1/2M PL25X3/4M PL25X1M PL32x1/2M PL32x3/4M PL32X1M PL32x11/4M Female elbow: PL16X1/2F PL16X3/4F PL20X1/2F PL20X3/4F PL20x1F PS25X1/2F PS25X3/4F PS25X1F PL32x1/2F PS32X3/4F PS32X1F PL32x11/4F Wall plated elbow: PZL16X1/2F PZL16x3/4F PZL20X1/2F PZL20X3/4F Tee: PT16X16X16 PT20X20X20 PT25X25X25 PT32X32X32 Reduced tee: PT16X20X16 PT16X25X16 PT20X16X20 PT20X25X20 PT25X16X25 PT25X16X16 PT25X20X25 PT25X32X25 PT32X16X32 PT32X20X32 PT32X25X32 PT25x16x20 PT32x20x25 PT32x20x26 PT20X16X16 PT20X20X16 PT25X25X20 PT25X20X20 PT25x16x20 PT32x20x25 PT32x32x16 PT32x32x20 PT32x25x25 Male tee: PT16X1/2MX16 PT16x3/4Mx16 PT20X1/2MX20 PT20X3/4MX20 Female tee: PT16X1/2FX16 PT16X3/4FX16 PT20X1/2FX20 PT20X3/4FX20 PT20X1FX20 PT25X1/2FX25 PT25X3/4FX25 PT25X1FX25 32X1/2FX32 PT32X3/4FX32 PT32X1FX32 PT32X11/4FX32 Cap: PSE16 PSE20 PSE25 PSE32 Female union: PS16X1/2F-H PS16X3/4F-H PS20X1/2F-H PS20X3/4F-H PS25X1/2F-H PS25X3/4F-H PS25X1F-H PS32X1F-H Pipe: ALPEX162 ALPEX202 ALPEX252 ALPEX323

Approval Holder:

Pedarson LTD

Company Name

Pedarson LTD

Address

Unit 16 Martlesham Creek Ind Est Sandy Lane Woodbridge Suffolk

Postcode

IP12 4SD

Country

United Kingdom

Phone

01394384077

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15MM– 54MM & 1/2” – 1”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression SB-COMCP015 – 15mm SB-COMCP022 – 22mm SB-COMCP028 – 28mm SB-COMCP035 – 35mm SB-COMCP042 – 42mm SB-COMCP054 – 54mm 90 Degree Elbow Compression SB-COMEL015 – 15mm SB-COMEL022 – 22mm SB-COMEL028 – 28mm SB-COMEL035 – 35mm SB-COMEL042 – 42mm SB-COMEL054 – 54mm Equal Tee Compression SB-COMTE015 – 15mm SB-COMTE022 – 22mm SB-COMTE028 – 28mm SB-OMTE035 – 35mm SB-COMTE042 – 42mm SB-COMTE054 – 54mm Male Iron Coupling Compression SB-COMCPMI0153/8 – 15mm x 3/8” SB-COMCPMI0151/2 – 15mm x ½” SB-COMCPMI0221/2 – 22mm x ½” SB-COMCPMI0223/4 – 22mm x ¾” SB-COMCPMI0221 – 22mm x 1 “ SB-COMCPMI0281 – 28mm x 1” Female Iron Coupling Chrome Compression SB-COMCPFI0151/2CP – 15mm x ½” SB-COMCPFI0223/4CP – 22mm x ¾” End Cap Compression SB-COMEC015 – 15mm SB-COMEC022 – 22mm

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Manufacturer:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

IDC logo (E) and Size on body. EN 1254-2 and Size on Nut

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of compression fittings incorporating polypropylene bodies, plastic pipe liners, plastic grip rings and EPDM seals. For use with PE100 pipe manufactured to BS EN 12201. Maximum working pressure: 16Bar. Maximum operating temperature: 23°C

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702043

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Compression: 20mm, 25mm, 32mm and 75mm sizes only are approved. Threaded ½” - 2 ½” BSP (M & F).

Marking:

Poliext, Size and pressure on nut.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

627_01 Couplings, 627_05 Female Couplings, 627_12 Male Couplings, 627_19 Elbows, 627_23 Female Elbows, 627_28 Male Elbows, 627_32 End Plugs, 627_36 Reducing Couplings, 627_39 Tee Couplings, 627_43 Tee Coupling Females, 627_49 Tee Coupling Males.

Approval Holder:

Poliext Kft

Company Name

Poliext Kft

Address

Matkó tanya 232, Kecskemét

Country

Hungary

View All Listings by this Company

Range of Victaulic rigid couplings (905, H10, H11, H20, H50) for use with plain end HDPE pipe (EN 12201-2), and for product 907, for use with EN 12201-2 HDPE and EN 10217-1 steel pipe. For above and below ground use. Maximum working pressure: SDR7.4 25bar, SDR11 16bar or SDR17 10bar. Maximum operating temperature: Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For H10, H11, H20 and H50, sizes 75, 140, 225mm not available in SDR7.4.

Size:

See Models below.

Marking:

Victaulic and size on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

905 Style 905 Coupling 63mm – 315mm Rigid Coupling, 907 Style 907 Transition Coupling 63mm x DN50 - 280mm x DN250 Rigid Coupling H10, HDPE 90° Elbow 63mm – 225mm Rigid Coupling, H11, HDPE 45° Elbow 63mm – 225mm Rigid Coupling, H20, HDPE Straight Tee 63mm – 225mm Rigid Coupling, H50, HDPE Concentric Reducer 90mm x 63mm – 160mm x 110 mm Rigid Coupling.

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Range of metric and imperial PVC-U Solvent cement or Threaded fittings for use with PVC-U pressure pipe Class E manufacture to BS EN 1452 Maximum working pressure; 16 Bar Maximum operating temperature; Cold water only

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Omega, Size, pressure and material on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

PVC Fitting Plain Socket Elbow 90° PFPGOI0200 20 mm SC PFPGOI0250 25 mm SC PFPGOI0320 32 mm SC PFPGOI0400 40 mm SC PFPGOI0500 50 mm SC PVC Fitting Plain TEE 90° PFPTII0200 20 mm SC PFPTII0250 25 mm SC PFPTII0320 32 mm SC PFPTII0400 40 mm SC PFPTII0500 50 mm SC PVC Fitting Plain Elbow 45° PFPGYI0200 20 mm SC PFPGYI0250 25 mm SC PFPGYI0320 32 mm SC PFPGYI0400 40 mm SC PFPGYI0500 50 mm SC PVC Fitting Plain Socket (Metric) PFPMAI0200 20 mm SC PFPMAI0250 25 mm SC PFPMAI0320 32 mm SC PFPMAI0400 40 mm SC PFPMAI0500 50 mm SC PFPMAI0630 63 mm SC PFPMAI0750 75 mm SC PFPMAI0900 90 mm SC PFPMAI1100 110 mm SC PVC Fitting Reducing Piece (M/F) PFPMRI032B 25mm SC x 32mm SC x 20mm SC PFPMRI040B 32mm SC x 40mm SC x 20mm SC PFPMRI040C 32mm SC x 40mm SC x 25mm SC PFPMRI050B 40mm SC x 50mm SC x 20mm SC PFPMRI050C 40mm SC x 50mm SC x 25mm SC PFPMRI050D 40mm SC x 50mm SC x 32mm SC PVC Fitting Plain Reducing Tee 90° (Metric) PFPTRI032B 32mm SC x 20mm SC PFPTRI032C 32mm SC x 25mm SC PFPTRI050B 50mm SC x 20mm SC PFPTRI050C 50mm SC x 25mm SC PFPTRI050D 50mm SC x 32mm SC PVC Fitting Plain Serrated Stub Flange (Metric) PFPQRI0250 25 mm SC PFPQRI0320 32 mm SC PFPQRI0400 40 mm SC PFPQRI0500 50 mm SC PVC Fitting Plain Reducing Bush (Metric) PFPRCI025B 25mm SC x 20mm SC PFPRCI032B 32mm SC x 20mm SC PFPRCI032C 32mm SC x 25mm SC PFPRCI040B 40mm SC x 20mm SC PFPRCI040C 40mm SC x 25mm SC PFPRCI040D 40mm SC x 32mm SC PFPRCI050C 50mm SC x 25mm SC PFPRCI050D 50mm SC x 32mm SC PFPRCI050E 50mm SC x 40mm SC PVC Fitting Plain Cap (Metric) PFPCAI0200 20 mm SC PFPCAI0250 25 mm SC PFPCAI0320 32 mm SC PFPCAI0400 40 mm SC PFPCAI0500 50 mm SC PVC Fitting Loose Flange PFPFLI0500 50 mm SC PVC Fitting Plain Union with O-Ring PFPBOI0200 20 mm SC PFPBOI0250 25 mm SC PFPBOI0320 32 mm SC PFPBOI0400 40 mm SC PFPBOI0500 50 mm SC PVC Fitting Adaptor Threaded Elbow 90° PFTGOF0200 ½˝ PFTGOF0250 ¾˝ PFTGOF0320 1˝ PFTGOF0400 1¼˝ PFTGOF0500 1½˝ PVC Fitting Threaded Elbow 45° (Imperial) PFTGYF0500 1½˝ PVC Fitting Threaded 90° Tee Female BSP PFTTIF0200 ½˝ PFTTIF0250 ¾˝ PFTTIF0320 1˝ PFTTIF0400 1¼˝ PFTTIF0500 1½˝ PVC Fitting Reducer Male/Female PFTRIF025B ¾˝ x ½˝ PFTRIF032B 1” BSP x ½˝ PFTRIF032C 1” BSP x ¾˝ PFTRIF050D 1½” BSPx1” BSP PVC Fitting Adaptor Union Threaded BSP (F/M) PFTBOF0200 ½˝ PFTBOF0250 ¾˝ PFTBOF0320 1” BSP PFTBOF0400 1¼” BSP PFTBOF0500 1½˝ PVC Fitting Threaded Socket Female BSP PFTMAF0200 ½˝ PFTMAF0250 ¾˝ PFTMAF0320 1” BSP PFTMAF0400 1¼” BSP PFTMAF0500 1½˝ PVC Fitting Threaded Nipple Male BSP PFTNIF0200 ½˝ PFTNIF0250 ¾˝ PFTNIF0320 1” BSP PFTNIF0400 1¼” BSP PFTNIF0500 1½˝ PVC Fitting Cap Threaded PFTCAF0200 ½˝ PFTCAF0250 ¾˝ PFTCAF0320 1” BSP PFTCAF0400 1¼” BSP PFTCAF0500 1½˝ PVC Fitting 90O Elbow Plain Threaded PFAGOR020B 20 mm SC x½˝ PFAGOR025C 25mm SC x¾˝ PFAGOR032D 32mm SC x1” BSP PFAGOR040E 40mm SC x1¼” BSP PFAGOR050F 50mm SC x1½˝ PVC Fitting Adaptor 90° Tee Plain to BSP PFATIR020B 20 mm SC X½˝ PFATIR025C 25mm SC x¾˝ PFATIR032D 32mm SC x1” BSP PFATIR040E 40 mm SC x 1¼” BSP PFATIR050F 50mm SC x1½˝ PVC Fitting 90O Tee Reduced Plain Threaded PFATRIR032C 32 mm SC x ¾” BSP PFATRIR050B 50 mm SC x ½” BSP PFATRIR050D 50 mm SC x 1” BSP PVC Fitting Male Adaptor PFAAMR020B 20x 25mm SC x½” BSP PFAAMR025B 25mm SC x 32mm SC x½” BSP PFAAMR025C 25mm SC x 32mm SC x¾” BSP PFAAMR025D 25mm SC x 32mm SC x1” BSP PFAAMR032C 32mm SC x 40mm SC x¾” BSP PFAAMR032D 32mm SC x 40mm SC x1” BSP PFAAMR040E 40mm SC x 50mm SC x1¼” BSP PFAAMR040F 40mm SC x 50mm SC x1½” BSP PFAAMR050F 50mm SC x 63mm SC x1½” BSP PFAAMR050G 50mm SC x 63mm SC x2” BSP PVC Fitting Adaptor Reducing Bush PFARCC032B 32 mm SC x ½” BSP PFARCC032C 32 mm SC x ¾” BSP PFARCC040D 40mm SC x1” BSP PFARCC050E 50mm SC x1¼” BSP PVC Fitting Female Adaptor PFAMAR020B 20 mm SC X½” BSP PFAMAR025C 25mm SC x¾” BSP PFAMAR040E 40mm SC x1¼” BSP PFAMAR050F 50mm SC x1½” BSP PVC Fitting Union with O-Ring Plain Threaded PFABOR020B 20 mm SC X½” BSP PFABOR025C 25mm SC x¾” BSP PFABOR032D 32mm SC x1” BSP PFABOR040E 40mm SC x1¼” BSP PFABOR050F 50mm SC x1½” BSP PVC Fitting Plain Socket 90o Elbow PFPGOP0200 ½” PFPGOP0250 ¾” PFPGOP0320 1” PFPGOP0400 1¼” PFPGOP0500 1½” PVC Fitting Plain Socket 45o Elbow PFPGYP0200 ½” PFPGYP0250 ¾” PFPGYP0320 1” PFPGYP0400 1¼” PFPGYP0500 1½” PVC Fitting Plain 90o Tee (Imperial) PFPTIP0200 ½” PFPTIP0250 ¾” PFPTIP0320 1” PFPTIP0400 1¼” PFPTIP0500 1½” PVC Fitting Socket PFPMAP0200 ½” PFPMAP0250 ¾” PFPMAP0320 1” PFPMAP0400 1¼” PFPMAP0500 1½” PVC Reducing Bush PFPRCP025B ¾” x ½” PFPRCP032B 1” x ½” PFPRCP032C 1” x ¾” PFPRCP040D 1¼” x1” PFPRCP050C 1½” x¾” PFPRCP050D 1½” x1” PFPRCP050E 1½” x1¼” PVC Fitting 90o Tee Reducing PFPTRP032B 1” x ½” PFPTRP032C 1” x ¾” PFPTRP050D 1½” x1” PVC Fitting Stub Flange PFPQRP0200 ½” PFPQRP0250 ¾” PFPQRP0320 1” PFPQRP0400 1¼” PFPQRP0500 1½” PVC Fitting Plain Cap PFPCAP0200 ½” BSP PFPCAP0250 ¾” BSP PFPCAP0320 1” BSP PFPCAP0400 1¼” BSP PFPCAP0500 1½” BSP PVC Fitting Union with O-Ring PFPBOP0200 ½” BSP PFPBOP0250 ¾” BSP PFPBOP0320 1” BSP PFPBOP0400 1¼” BSP PFPBOP0500 1½” BSP PVC Fitting Adaptor Plain/Threaded 90o Elbow All Threaded BSP PFAGOC020B ½” BSP x ½” BSP PFAGOC025C ¾” BSP x ¾” BSP PFAGOC032D 1” BSP x 1” BSP PFAGOC040E 1¼” BSPx 1¼” BSP PFAGOC050F 1½” BSPx 1½” BSP PVC Fitting Female Adaptor PFAMAC0200 ½” BSPx½” BSP PFAMAC0250 ¾” BSPx¾” BSP PFAMAC0320 1” BSPX1” BSP PFAMAC0400 1¼” BSPx1¼” BSP PFAMAC0500 1½” BSPx1½” BSP PVC Fitting Tee Plain/Threaded PFATICR020B ½” BSPx½” BSP PFATICR025C ¾” BSPx¾” BSP PFATICR032D 1” BSPX1” BSP PFATICR040E 1¼” BSPx1¼” BSP PFATICR050F 1½” BSPx1½” BSP PVC Fitting Male Threaded Adaptor PFAAMC0200 ½” BSPx¾” BSPx½” BSP PFAAMC0250 ¾” BSPx1” BSPx¾” BSP PFAAMC0320 1” BSPx1¼” BSPx1” BSP PFAAMC0400 1¼” BSPx1½” BSPx1½” BSP PFAAMC050F 1½” BSPx2” BSPx1½” BSP PVC Fitting Adaptor Socket PFAMAB020B 20 mm SC x½” BSP PFAMAB025C 25mm SC x¾” BSP PFAMAB032D 32mm SC x1” BSP PFAMAB040E 40mm SC x1¼” BSP PFAMAB050F 50mm SC x1½” BSP PVC Fitting Tee Reducer PFATRF032B 1” x ½” PFATRF032C 1” x ¾” PFATRF050B 1½” x1½” PFATRF050C 1½” x¾” PVC Fitting Union with O-Ring Plain Threaded PFABOC0200 ½” BSP x ½” BSP PFABOC0250 ¾” BSP x ¾” BSP PFABOC0320 1” BSP x 1” BSP PFABOC0400 1¼” BSP x 1¼” BSP PFABOC0500 1½” BSP x 1½” BSP PVC Fitting Union with O-Ring Plain (Metric/Imp.) PFABOB0200 20 mm SC x ½” BSP PFABOB0250 25 mm SC x ¾” BSP PFABOB0320 32 mm SC x 1” BSP PFABOB0400 40 mm SC x 1¼” BSP PFABOB0500 50 mm SC x 1½” BSP PVC Fitting Union F/M with O-Ring Plain/ Threaded PFABOCM050F 1½” BSP x 1½” BSP PVC Fitting Union F/M with O-Ring Plain/ Threaded PFABORM050F 50mm x 1½” BSP

Approval Holder:

PPFV Ltd.

Company Name

PPFV Ltd.

Address

6 Cedar Trade Park, Cobham Road Ferndown Industrial Estate, Wimbourne, Dorset

Postcode

BH21 7SD

View All Listings by this Company

Manufacturer:

Niesco For Modern Water Systems Production

Company Name

Niesco For Modern Water Systems Production

Address

Industrial District Six, Piece 69, 71, Badr City, Cairo

Country

Egypt

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of dual flush WC syphons incorporating polypropylene bodies and stainless-steel C-links. Cold water use only

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250702707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” BSP (M).

Marking:

Armitage Shanks and FreeFlo on top of flush valve

Installation Requirements:

R001 R556

Expiry date:

31/07/2030

Model:

EEM10073M67 (7.5”), EEM10073L67 (8”), EEM10073O67 (9.5”), EEM10073U67 (11.5”).

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Alfred Victoria "crown" logo on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

F104M

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Range of heat interface units providing heating and instantaneous hot water. The central heating and hot water are generated via plate heat exchangers. The central heating circuit contains a pressure relief valve (3.0 bar) and an expansion vessel. The cold inlet supply to the plate heat exchanger incorporates an in line single check valve assembly, (suitable for backflow protection against Fluid Category 2). Max Temperature & Pressure for models A/7892284 & B/7892283: Primary Circuit: 6.0 bar at 90°C DHW Circuit: 10.0 bar at 55°C Secondary Circuit 6.0 bar at 90°C Max Temperature & Pressure for all other models: Primary Circuit: 16.0 bar at 90*C, DHW Circuit: 10.0 bar at 65*C, Secondary Circuit 3 bar at 85*C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (F) captive nut connections

Marking:

Baxi on front cover, Baxi, product info on label on front cover

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

A/7892284 AquaHeat HD/HWI 12/50 with Heat Meter & Mercurius B/7892283 AquaHeat HD/HWI 12/50 Models added September 2025: 7867470 AquaHeat HI/HWI 4/50 with Heat Meter & Mercurius, 7867472 AquaHeat HI/HWI 4/50, 7867574 AquaHeat HI 50 with Heat Meter & Mercurius, 7867575 AquaHeat HI 50, 7867476 AquaHeat HI/HWI 14/50 with Heat Meter & Mercurius, 7867477 AquaHeat HI/HWI 14/50.

Approval Holder:

Baxi Heating UK Limited

Company Name

Baxi Heating UK Limited

Address

Brooks House, Coventry Road, Warwick

Postcode

CV34 3LL

View All Listings by this Company

Manufacturer:

Baxi Heating UK Limited

Company Name

Baxi Heating UK Limited

Address

Brooks House, Coventry Road, Warwick

Postcode

CV34 3LL

View All Listings by this Company

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The DPV(M/S) models and DPV(S) models can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: DPV models 10.0 bar, DPVM models with an oval flange or VME models with integral check valve 16.0 bar, All other DPVM models 25.0 bar. DPV(S) models with an oval flange or DPV(S)(E) models with integral check valve 16.0 bar, All other DPV(S) models and DPH(S)I models 25.0 bar. Maximum operating temperatures: DPHM, DPVE and DPVME models with integral check valve 60°C, all other model variants 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250302723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DPHM 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. DPV(M/S)(F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. DPV(S) (F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. DPV(S)F 25/40/60/85/125 B: Round flange: DN65, DN80, DN100, DN125. DPH(S)I 2/4/6 B: 1¼” BSP or NPT (F). DPH(S)I 10/15 B/C: 2” BSP or NPT (F).

Marking:

DPVF & logo, model name, PN, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

DPHM x yy B. Where: x = flow rate m³/h (2, 4 or 6). yy = no. of stages ranges 1-6 stages. ------------------------------------- DPV(M/S)(F/E/V/T) x yy B/C Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages DPV(M/S)(F/E/V/T)……2 B 1-30 stages. DPV(M/S)(F/E/V/T)……4/6 B 1-26 stages. DPV(S)(F/E/V/T)……10 B 1-21 stages. DPV(S)(F/E/V/T)……15 B/C 1-17 stages. -------------------------------------- DPV(S) F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90(model 85) or 125). yy = no. of stages ……25 B 1-12 stages. ……40/60 B 1-10 stages. ……85 B 1-6 stages. ……125 B 1-4 stages. -------------------------------------- DPHI x yy = Vertically oriented (AISI 304). DPHSI x yy = Vertically oriented (AISI 316). Where: I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages DPH(S)I 2/4/6 B 1-14 stages. DPH(S)I 10 B/15 B/15 C 1-8 stages.

Approval Holder:

Duijvelaar Pompen B.V.

Company Name

Duijvelaar Pompen B.V.

Address

Kalkovenweg 13 2401 LJ Alpen aan den Rijn

Country

Netherlands

Phone

0031 0172 488388

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U3, U5, P3 or P5: 1” BSP (F) inlet x 1” BSP (F) outlet. U7 or P7: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 or P9: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 or P18: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Ultra Models: Pentax logo and other technical data on data plate on body. Plus Models: Foras logo (brand of Pentax SpA) and other technical data on data plate on body

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Proviso:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Model:

ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. PLUS range: P 3 – XX/Y, P 5 – XX/Y, P 7 – XX/Y, P 9 – XX/Y, P 3 – XX/Y T, P 5 – XX/Y T, P 7 – XX/Y T, P 9 – XX/Y T, P 18 – XX/Y T. Where: U or P = model type. U = ULTRA, P = PLUS. 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3 or P3 (single or three phase): 50-150. U5 or P5 (single or three phase): 70-200. U7 or P7 (single phase): 100-300. U7 or P7 (three phase): 100-350. U9 or P9 (single or three phase): 100-250. U18 or P18 (three phase only): 180-400. Y = Number of impellers. U3, U5, P3 or P5 (single or three phase): 2-7 stages. U7 or P7 (single phase): 2-6 stages. U7 or P7 (three phase): 2-7 stages. U9 or P9 (single or three phase): 2-5 stages. U18 or P18 (three phase only): 2-4 stages. Blank or T = motor: blank = single phase, T = 3 phase

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Manufacturer:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

HS183 and HS3013 shower handset. HS2018 and HS2019 overhead shower outlet.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Notes & Further Information

XXX Denotes the following: First, second & third different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Range of shower handsets and headsets with chromium plated plastic bodies. Models P60901 and P61400 have check valves fitted at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Maximum working pressure: Open outlet. Maximum operating temperature: 60.0°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250702021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Female (shower head) ½” BSP Male (shower handset)

Marking:

Solex on ball joint (overhead shower), Solex on body (handset).

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

P22000 (Shower head), P22200 (Shower head), P26500 (Shower head), P60901 (shower handset), P61501 (shower handset), P61400 (shower handset), P61403 (shower handset), P60700 (shower handset), P60701 (shower handset).

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Range of fixed shower arms, (brass bodies - various finishes) with EPDM O-Rings. Maximum operating temperature: 85°C, open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250702026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm female inlet x 1/2" BSP (M)

Marking:

Aqualisa on cover plate

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

1001413 XX OPN2003 XXXXXX Finish options: 704232-Chrome, 706385 – PVD Matt Black, 706394 – PVD Brushed Brass)

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of shower arms with brass bodies. Models 91xx7034 & 91xx9323 incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 80.0°C (models 86xxxxxx) or 60.0°C (models 91xxxxxx)

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250702049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet

Size:

½” BSP (M)

Marking:

Fantini on backplate

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

86xx8027 86xx8028 86xx8137 91xx7034 91xx9323 Where xx is replaced with the following to denote finish: 01 = Gold Plus, 02 = Chrome, 13 = Matt Black, 29 = Matt White, 38 = Polished Stainless Steel, 93 = Brushed Stainless Steel, 95 = Nickel PVD, P5 = Matt Gun Metal PVD, P6 = Matt British Gold PVD, P9 = Matt Copper PVD, S1 = Deep Black PVD, Q7 = Pure Brass PVD, Q8 = Raw Metal PVD.

Manufacturer:

Fratelli Fantini Spa

Company Name

Fratelli Fantini Spa

Address

Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Range of (chrome plated) plastic shower handsets with flexible shower hose and stainless-steel braided connection hose. The inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250504008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R009 only applied to the flexible braided inlet hose that connects to the shower hose.

Size:

½” BSP (F) captive nut.

Marking:

Gessi Emporio etched on face plate.

Installation Requirements:

R001 R009 R040

Expiry date:

31/05/2030

Model:

47227, 47127.

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Range of draining taps, straight or elbowed with brass bodies incorporating a rising spindle headwork. Maximum working pressure 10.0 Bar Maximum operating temperature 95.0°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

250702048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

IDC E logo and size on body. size and EN number on nut

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

BF8712 Elbow Drain off Mi x C Compression x Male 3/4”Mx 21mm BF8713 Elbow Drain off Mi x C Compression x Male 1”M x 27.4mm BF4712 Elbow Drain off compression 21mm x 21mm BF4713 Elbow Drain off compression 27.4mm x 27.4mm BF1711 Straight Drain off compression 14.7mm x 14.7mm BF1712 Straight Drain off compression 21mm x 21mm BF1713 Straight Drain off compression 27.4mm x 27.4mm

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

Zhejiang IDC Fluid Control Co Ltd

Company Name

Zhejiang IDC Fluid Control Co Ltd

Address

Machinery Industrial Park Zhugang Town Yuhuan County

Country

Zhejiang

General Email

View All Listings by this Company

CR27A Chrome Pillar tap with single lever or cross-top operating members incorporating a 1/4 turn ceramic disc headwork. The spout incorporates a flow straightener. Maximum pressure 10 bar. Maximum temperature 60 °C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250715308

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP

Marking:

Deva, DTC59 – on rear of body

Installation Requirements:

R001 R005

Expiry date:

31/07/2030

Model:

CR27A

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

GE01, GE01/501, CR19 & CR19/501 Pillar taps with single lever or cross-top operating members incorporating a 1/4 turn ceramic disc headwork. Models GE01 & GE01/501 incorporate a flow straightener. Maximum pressure 10 bar. Maximum temperature 60 °C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250715309

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2 BSP

Marking:

Deva, DTC59 on rear of body

Installation Requirements:

R001 R005

Expiry date:

31/07/2030

Model:

GE01 & GE01/501 incorporate a flow straightener. CR19 & CR19/501

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of pillar taps (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure Bar 10.0 Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250788006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

SCUDO logo, hot & cold indicators on body.

Installation Requirements:

R001 R005

Expiry date:

31/07/2030

Model:

TAP301 PBBR009 TAP302 PBBR011

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Range of pillar taps (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure Bar 10.0 Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250788007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) ¾” BSP (M)

Marking:

SCUDO logo, hot & cold indicators on body.

Installation Requirements:

R001 R006

Expiry date:

31/07/2030

Model:

TAP303, BLACK300ORBL, BR-BRASS300 SWBR015, PBBR015, SWBR024 PBBR024, SWBR033, PBBR033 SWBR086, PBBR086 TAP304, BLACK301ORBL, BR-BRASS301 SWBR019, PBBR019, SWBR028 PBBR028, SWBR037, PBBR037 SWBR090, SWBR099, TAP305, BLACK302ORBL, BR-BRASS302, SWBR042 PBBR042, SWBR051, PBBR051 SWBR060, PBBR060, SWBR104 SWBR113 TAP306, BLACK303ORBL BR-BRASS303, SWBR046, PBBR046 SWBR055, PBBR055, SWBR064 PBBR064, SWBR108 & SWBR117

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Softpex® Range of Stainless Steel and Polyamide braided, PE lined connection hoses with various end connections DN6 (S/S & PA braided – PE-RT) , DN8 (S/S & PA braided – PEX), DN10 (S/S braided - PEX ONLY), DN13 (S/S braided - PEX ONLY) Maximum working pressure; 10 Bar Maximum operating temperature; 70°c

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250702033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Female elbow (BSP) ⅜, ½, ¾ Female straight (BSP) ⅜, ½, ¾ Tube ø10, ø12 & ø15 Male M8, M10, M12 Male straight (BSP)- ⅜, ½, ¾ Comp. joint (Compression)- ø10

Marking:

Neoperl, SPX, size, temperature, date of manufacture (YYMMDD) on ferrule

Installation Requirements:

R001 R008

Expiry date:

31/07/2030

Model:

Softpex® 39.00CD.EFG.HI Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type (supply hose, outlet hose, shower hose etc.) B = Hose (inliner) Material CD.EFG = Manufacturing sequential number HI = Packaging information DN6 (S/S & PA braided - PEX & PE-RT) DN8 (S/S & PA braided - PEX & PE-RT) DN10 (S/S braided - PEX ONLY) DN13 (S/S braided - PEX ONLY)

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Range of wall mounted, concealed, manually operated blending valves with (brass bodies - various finishes), incorporating ceramic cartridge or quarter turn ceramic disc headworks and single lever or dome type operating members. Maximum working pressure 5.0 Bar Maximum operating temperature 70 °C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

250713002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Gessi on operating member

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

19710 & 38312 Emporio Shower mixer. 66132 & 54169 Origini Shower mixer

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control

Wall Mounted Inlets incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Manufacturers:

PPI Xiamen Industry Co Ltd

Wall mounted shower valve (various finishes) incorporating a quarter turn ceramic disc headwork controlling flow on/off and to either the overhead shower or the handset (CAM-149T-RRK-XXX). Temperature is controlled via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure: 5bar. Maximum operating temperature: 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250708019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are not supplied with shower hose, overhead shower headset or shower handset.

Size:

15m compression.

Marking:

Vado on mixer body & accessories.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

CAM-149T-XXX, CAM-149T-RRK-XXX. T- Thermostatic. RRK- Rigid riser kit. Suffixes that replace XXX to denote colour finish: MB- Matt Black, MW- Matt White, SBR- Satin Brass CP or C/P - Chrome.

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar Somerset

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Wall mounted thermostatic bar type shower valves with a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250588001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” x ½” offset unions. 15mm compression end connections.

Marking:

All models: Aqualisa on valve. Aqualisa on shower hose. Aqualisa on shower handset.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

RNDSBV1.MB - Round Bar Valve - Matt Black. AQ75BAR1.MB - AQ COOL TOUCH ROUND BAR VALVE (INC FIXING KIT) LP/HP - MATT BLACK. 590HP.MB - Sierra Cool Touch Round Bar Valve (inc fixing kit) - MATT BLACK.

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company