Combination Tap Assemblies

Section Code 0530 : Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

Back To Directory Sections

WRAS Approval Number: 1609019

Range of wall mounted two hole, single outlet (fixed), combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1609019
  • Expiry date: 30/09/2021
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” offset unions.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R030
  • Model
    31 480 xxx Hansgrohe Metris, 13 040 xxx Hansgrohe Picta & 14 403 xxx Hansgrohe Sanibel. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609036

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork, single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Shower outlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1609036
  • Expiry date: 30/09/2021
  • Note: Not supplied with shower hose and handset
  • Size: ½” BSP male
  • Marking: Ideal standard on operating member
  • Installation Requirements R001 R030
  • Model
    A6338AA Tonic II
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609037

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The shower outlet incorporates a single check valve cartridge (suitable for backflow prevention against Fluid Category 2).The shower handset incorporates a flow regulator at the inlet. The product is supplied with metal back nuts and a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1609021

Range of two hole, single outlet (fixed) floor mounted or deck mounted combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and either single lever (LD50XT model) or cross top (LD40XT model) operating members, and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset, both the shower outlet and shower handset incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3). The product is also supplied with ¾” NPT (F) x ¾” BSP (M) adaptors. Maximum working pressure 5.5 Bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1609022

Range of two hole, single outlet (fixed) floor mounted combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and either single lever (LDXT70 & LDXTSE) or cross top (LDXT60) operating members, and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Both the shower outlet and shower handset incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3). Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1609022
  • Expiry date: 30/09/2021
  • Size: ¾” BSP male
  • Marking: WS on rear of body
  • Installation Requirements R001 R030
  • Model
    LDXT60 & LDXT70 Model added December 2019: LDXTSE
  • Factor: Waterworks
    Company Name
    Waterworks
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610051

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1610051
  • Expiry date: 31/10/2021
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” BSP offset unions.
  • Marking: ‘Ideal Standard’ located on the operating member.
  • Installation Requirements R001 R030
  • Model
    Tesi range: A6583AA
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611028

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headworks with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the shower outlet incorporates a single check valve cartridge (suitable for backflow prevention against fluid category 2). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1611028
  • Expiry date: 30/11/2021
  • Note: This approval does not include a hose and handset.
  • Size: ¾” x ½” offset unions
  • Marking: Grohe logo on operating member. Grohe Germany and product info on rear of body
  • Installation Requirements R001 R030
  • Model
    “Eurostyle New” OHM bath mixer Grohe product no. 33.591.003, 33.591.LS3 & 23.726.003 “Wave New” OHM bath mixer Grohe product no. 32.286.001.
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1708700

Range of two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members, and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts. Model VAL BSM E8 C CD is also supplied with a flow regulator, intended for installation at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1708700
  • Expiry date: 31/08/2022
  • Size: ¾” BSP (M).
  • Marking: Bristan logo on operating members.
  • Installation Requirements R001 R005 R030
  • Model
    VAL BSM C CD. Model Added March 2018: VAL BSM E8 C CD. Model Added January 2021: VAL2 BSM C CD
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611047

Wall mounted, two hole, bar type thermostatic blending valve (chromium plated brass) incorporating a half turn ceramic disc for diverting between bath/off/shower positions and a thermostatic cartridge controlling the temperature, both with dome type operating members. The product also incorporates a self-cancelling diverter to a shower handset. The product is supplied with an overhead shower head, shower hose and handset. The spout outlet incorporates a plastic aerator. Each inlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1611047
  • Expiry date: 30/11/2021
  • Size: ½” x ¾” offset unions
  • Marking: Hansgrohe logo on top of body. Hansgrohe logo and product info on underside of body
  • Installation Requirements R001 R030
  • Model
    27 117 xxx Raindance Select 240 Showerpipe Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611059

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts. Both the outlet to the shower hose and the inlet to shower handset incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3). Maximum working pressure 5.5 Bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1611059
  • Expiry date: 30/11/2021
  • Size: ¾” BSP (M)
  • Marking: Waterworks ”W” logo on rotating spout escutcheon
  • Installation Requirements R001 R005 R030
  • Model
    HN40XT & HN50XT
  • Factor: Waterworks
    Company Name
    Waterworks
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611060

Floor mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts. Both the outlet to the shower hose and the inlet to shower handset incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3). Maximum working pressure 5.5 Bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1611060
  • Expiry date: 30/11/2021
  • Size: 22mm compression inlets
  • Marking: Waterworks ”W” logo on rotating spout escutcheon
  • Installation Requirements R001 R010 R040
  • Model
    HNXT60 & HNXT70
  • Factor: Waterworks
    Company Name
    Waterworks
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611055

Range of wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating half turn ceramic disc headworks, lever or dome type operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Both inlets and shower outlet incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1611055
  • Expiry date: 30/11/2021
  • Note: This approval does not include a shower hose and handset
  • Size: ½” x ¾” off-set unions
  • Marking: Grohe on body
  • Installation Requirements R001 R030
  • Model
    34.215.002, 34.323.002, 34.441.002, 34.567, 34.568 & 34.569
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709702

Two hole, single outlet fixed combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlets incorporate plastic flow straighteners and the products are supplied with metal backnuts, shower hose & handset. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1709702
  • Expiry date: 1/09/2022
  • Size: ¾ ” BSP male
  • Marking: Bristan on escutcheon. H and date of manufacture (MM/YY) on rear of body
  • Installation Requirements R001 R005 R030
  • Model
    QST BSM C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612330

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headwork, single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1612330
  • Expiry date: 31/12/2021
  • Size: ½” x ¾” offset unions
  • Marking: Grohe on operating member
  • Installation Requirements R001 R030
  • Model
    32.887 & 32.831
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609117

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork, single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Shower outlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1609117
  • Expiry date: 30/09/2021
  • Note: Not supplied with shower hose and handset
  • Size: ½” BSP male
  • Marking: Sottini on operating member
  • Installation Requirements R001 R030
  • Model
    A6626AA Turano SL
  • Factor: Sottini
    Company Name
    Sottini
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702006

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork, single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts, shower handset & hose assembly. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1702006
  • Expiry date: 28/02/2022
  • Size: ¾” BSP Male inlets.
  • Marking: Ideal Standard logo on operating member.
  • Installation Requirements R001 R006 R030
  • Model
    B7892AA Ceraplan.
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702007

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork, dome type operating members and a self-cancelling diverter to shower outlet (which incorporates a single check valve). The spout outlets incorporate a plastic flow straightener & the products are supplied with metal backnuts, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1702007
  • Expiry date: 28/02/2022
  • Size: ¾” BSP male
  • Marking: Sottini on operating member.
  • Installation Requirements R001 R005 R010 R030
  • Model
    B8428AA – Sottini Rosita Bath Shower Mixer
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702344

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork, single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic aerator. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1702344
  • Expiry date: 28/02/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions
  • Marking: Grohe on spout
  • Installation Requirements R001 R010 R040
  • Model
    23.317 & 23.317.IGO
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702008

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating member and self-cancelling diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) The spout outlet incorporates a plastic flow straightener. The shower handset incorporates a plastic flow regulator at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1703011

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Print This Approval


WRAS Approval Number: 1703367

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks, single lever top operating members and self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1703367
  • Expiry date: 31/03/2022
  • Note: Approval doesn’t include shower hose & handset
  • Size: ¾” BSP (M)
  • Marking: Twyford on operating members
  • Installation Requirements R001 R005 R020
  • Model
    X525255CP
  • Factor: Twyford Bathrooms (Geberit Service)
    Company Name
    Twyford Bathrooms (Geberit Service)
    View All Listings by this Company
  • Manufacturer: NSK Armatur AS
    Company Name
    NSK Armatur AS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611058

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts. Both the outlet to the shower hose and the inlet to shower handset incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3). Maximum working pressure 5.5 Bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1611058
  • Expiry date: 30/11/2021
  • Size: 22mm Compression inlets
  • Marking: Waterworks ”W” logo on rotating spout escutcheon
  • Installation Requirements R001 R030
  • Model
    HNXT20 & HNXT30
  • Factor: Waterworks
    Company Name
    Waterworks
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704011

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies available in various styles and finishes. Models Incorporate ¼ turn ceramic disc headworks and available with a variety of operating members (as specified below in models section) and a self-cancelling diverter to shower outlet. The spout outlet incorporates a metal aerator, and the shower handsets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2). The products are supplied with a shower hose and handset. Maximum working pressure 3.5 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1704011
  • Expiry date: 30/04/2022
  • Size: ½” Male BSP
  • Marking: THG under Spout
  • Installation Requirements R001 R010 R040
  • Model
    13G/W RANGE. A complete model number consists of the range, 13G/W and three digit codes at either end indicating style (xxx) and finish (yyy), resulting in the format xxx.13G/W.yyy. Available Styles - Spout Shao: A2I - Perle (Dome Type) A33 - Bambou cristal noir (Single Lever) A34 - Bambou cristal Ambre (Single Lever) A35 - Bambou cristal clair (Single Lever) A7D - Capucine mauve décor Or (Dome Type) A7E - Capucine vert décor Platine (Dome Type) G1V - Shao (Cross Top) G1W - Shao à manettes (Single Lever) G2J - Faubourg porcelaine blanche à manettes (Single Lever) G2K - Faubourg porcelaine blanche (Dome Type) G2L - Faubourg porcelaine noire (Dome Type) G2M - Faubourg porcelaine noire à manettes (Single Lever) G2N - Froufrou (Dome Type) G2P - Froufrou à manettes (Single Lever) G2R - Frivole (Dome Type) G2S - Frivole à manettes (Single Lever) G2T - Faubourg métal (Dome Type) G2U - Faubourg métal à manettes (Single Lever) G50 – Tango (Single Lever) G58 - Spirit à manettes (Single Lever) G64 - Primo (Cross Top) G69 - Spirit (Cross Top) G78 – Tendance (Single Lever) G7A - Beaubourg (Cross Top) G7B - Beaubourg à manettes (Single Lever) G7C - Saint Germain (Cross Top) G7D - Saint Germain à manettes (Single Lever) Available Finishes: A02 – Polished Chrome C02 – Matt Chrome C03 – Satin Chrome G02 – Polished Chrome/Polished Gold F18 – Rhodium Silver F19 – Matt Rhodium Silver H03 – Varnished Antique Silver H08 – Varnished Matt Antique Silver B01 – Polished Nickel C01 – Matt Nickel G01 – Polished Nickel/Polished Gold E02 – Matt Nickel/Polished Gold D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze H24 – Varnished Antique Red Copper H07 – Matt Antique Red Copper H44 – Polished Luxbrass H16 – Matt Luxbrass H12 – Satin Luxbrass F01 – Polished Gold F02 – Matt Gold F27 - Rose Gold F23 - PVD aspect chrome H50 - PVD aspect laiton mat F33 - PVD brown bronze colour F34 - PVD brown bronze colour – mât F35 - PVD brown bronze colour – satiné H52 - PVD couleur doré H53 - PVD couleur doré mat H54 - PVD couleur doré satiné H49 - PVD couleur laiton H51 - PVD couleur laiton satiné H55 - PVD couleur nickel H56 - PVD couleur nickel mat H57 - PVD couleur nickel satiné F20 - PVD DORE
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704008

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork and single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates a single check valve cartridge. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1704008
  • Expiry date: 30/04/2022
  • Note: Approval doesn’t include shower hose or handset.
  • Size: ¾” BSP (F) x ½” BSP (F) offset unions
  • Marking: OWIM GmbH & Co. KG and other information on rear of body.
  • Installation Requirements R001 R010 R030
  • Model
    HG01834B
  • Factor: Owim GmbH & Co. Kg
    Company Name
    Owim GmbH & Co. Kg
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704010

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies available in various styles and finishes. Models Incorporate ¼ turn ceramic disc headworks and are available with a variety of operating members (as specified below in models section) and a self-cancelling diverter to shower outlet. The shower handsets incorporate a single check valve cartridge (suitable for backflow prevention against Fluid Category 2). The products are supplied with a shower hose and handset. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1704010
  • Expiry date: 30/04/2022
  • Size: ½” BSP (M)
  • Marking: THG under Spout
  • Installation Requirements R001 R006 R030
  • Model
    13G/W RANGE. A complete model number consists of the range, 13G/W and three digit codes at either end indicating style (xxx) and finish (yyy), resulting in the format xxx.13G/W.yyy. Available Styles - Spout Amboise Malachit: A1J - Amboise Malachite (Dome Type) A1K - Amboise Lapis Lazuli (Dome Type) A1L - Amboise Jaspe rouge (Dome Type) A1M - Amboise Onyx noir (Dome Type) A1S - Cheverny Malachite (Dome Type) A1T - Cheverny Lapis Lazuli (Dome Type) A1U - Cheverny Jaspe rouge (Dome Type) A1V - Sully Malachite (Dome Type) A1W - Sully Lapis Lazuli (Dome Type) A1X - Sully Jaspe rouge (Dome Type) A2C – Oceania (Cross Type) A2E – Venice (Dome Type) A2F - Naïade (Dome Type) A2G - Ange (Dome Type) A2H - Panthère cristal clair (Dome Type) A2J - Papillon (Single Lever) A2K - Panthère cristal noir (Dome Type) A41 - Dahlia (Dome Type) A7A - Ithaque décor Or (Dome Type) A7B - Ithaque décor Platine (Dome Type) A7F - Marquise noir décor Or (Dome Type) A7G - Marquise blanc décor Platine (Dome Type) A7L - Poèmes (Dome Type) A8B - Vogue Améthyste (Dome Type) A8H - Vogue Quartz rose (Dome Type) A8M - Vogue Malachite (Dome Type) A8N - Vogue Jaspe rouge (Dome Type) A8P - Vogue Onyx noir (Dome Type) A8R - Vogue Oeil de tigre (Dome Type) A8S - Vogue Lapis Lazuli (Dome Type) A9B - Jaipur cristal satiné (Dome Type) A9C - Jaipur Onyx noir (Dome Type) A9D - Jaipur Quartz rose (Dome Type) A9F - Jaipur métal (Dome Type) G11 - Elysée (Dome Type) G13 - Rochambeau (Dome Type) G14 - Versailles (Dome Type) G24 - Amour de Trianon (Dome Type) G31 - Cygne (Dome Type) G47 - Vendôme (Dome Type) U1A - Mandarine métal (Dome Type) U1D - Mandarine cristal clair (Dome Type) U1E - Mandarine cristal clair satiné (Dome Type) U1K - Mandarine Cristallia Diamant (Dome Type) U1S - Sully Onyx blanc (Dome Type) U1V - Cheverny Onyx noir (Dome Type) U5A - Flore (Dome Type) U5D - Sun Dragon (Dome Type) U5G - Moon Dragon (Dome Type) U5H - Jade Dragon (Dome Type) U5J - Rose (Dome Type) U7A - Trocadéro Malachite (Dome Type) U7B - Trocadéro Lapis Lazuli (Dome Type) U7C - Trocadéro Jaspe Rouge (Dome Type) U7D - Trocadéro Onyx noir (Dome Type) U7E - Trocadéro Oeil de Tigre (Dome Type) U8B - Monte Carlo porcelaine or (Dome Type) U8C - Monte Carlo porcelaine or blanc (Dome Type) U93 - Malmaison métal (Dome Type) U94 - Malmaison cristal (Dome Type) U95 - Malmaison Portoro (Dome Type) U96 - Malmaison Bianca carrara (Dome Type) Spout 1900: A2N - Mossi cristal clair (Dome Type) A04 - Broadway à manettes (Single Lever) A52 - Broadway (Cross Top) G08 - Pompadour (Cross Top) G25 – 1900 (Cross Top) G28 - 1900 à manettes (Single Lever) G85 - Honfleur (Cross Top) N21 - Victoria (Cross Top) U4A - Diplomate bagues lisses (Dome Type) U4B - Diplomate bagues annelées (Dome Type) U4C - Diplomate bagues torsadées (Dome Type) U4D - Diplomate Royale (Dome Type) U4E - Duomo (Dome Type) U4F - Duomo cristal (Dome Type) U5B - Island (Dome Type) U5C - Paradise (Dome Type) U6A - Pétale de Cristal clair (Cuboid) U6B - Pétale de Cristal bleu (Cuboid) U6C - Pétale de Cristal rouge (Cuboid) U6D - Pétale de Cristal noir (Cuboid) U6E - Pétale de Cristal clair liseré doré (Cuboid) U6L - Numéro 60 (Cuboid) U8A - Wedding (Dome Type) Spout Pullman: A2L - Métropolis cristal noir (Cuboid) A2M - Métropolis cristal noir à manettes (Single Lever) A2R - Masque de Femme lunaire (Cuboid) A2S - Masque de Femme solaire (Cuboid) A2T - Masque de Femme, métal gravé (Cuboid) A2U - Masque de Femme, métal lisse (Cuboid) A2A - Métropolis cristal clair (Cuboid) A2B - Métropolis cristal clair à manettes (Single Lever) A38 - Niagara (Cuboid) A42 – Pomme cristal clair satine (Dome Type) A46 - Pomme cristal lustré or (Dome Type) A60 - Marina Onyx noir (Single Lever) A61 - Marina métal (Single Lever) G04 - Pure (Single Lever) G79 - Cubica (Cuboid) J06 - Pullman (Dome Type) J17 - Beverley (Dome Type) U2D - Infini porcelain blanche (Dome Type) U2E - Infini porcelain blanche décor platine (Dome Type) U2F - Infini porcelain blanche décor Or (Dome Type) U5E – Ginkgo (Single Lever) U5F – Vegetal (Single Lever) Spout Charleston A54 - Art Déco (Cross Top) A55 - Art Déco à manettes (Single Lever) A56 - Art Déco Cristal (Single Lever) A57 – Tradition (Cuboid) A58 - Tradition à manettes (Single Lever) A59 - Tradition Cristal (Dome Type) A6A - Profil metal (Cross Top) A6B - Profil métal à manettes (Single Lever) A6G - Profil Lalique cristal clair (Cross Top) A6H - Profil Lalique cristal clair à manettes (Single Lever) A6N - Profil Onyx noir (Cross Top) A6P - Profil Onyx noir à manettes (Single Lever) E53 - Najem (Dome Type) G1T – Beluga (Cross Top) G1U - Beluga à manettes (Single Lever) G29 – Charleston (Cross Top) G3N - Charleston à manettes métal lisse (Single Lever) G75 - Charleston à manettes (Single Lever) Available Finishes: A02 – Polished Chrome C02 – Matt Chrome C03 – Satin Chrome G02 – Polished Chrome/Polished Gold F18 – Rhodium Silver F19 – Matt Rhodium Silver H03 – Varnished Antique Silver H08 – Varnished Matt Antique Silver B01 – Polished Nickel C01 – Matt Nickel G01 – Polished Nickel/Polished Gold E02 – Matt Nickel/Polished Gold D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze H24 – Varnished Antique Red Copper H07 – Matt Antique Red Copper H44 – Polished Luxbrass H16 – Matt Luxbrass H12 – Satin Luxbrass F01 – Polished Gold F02 – Matt Gold F27 - Rose Gold F23 - PVD aspect chrome H50 - PVD aspect laiton mat F33 - PVD brown bronze colour F34 - PVD brown bronze colour – mât F35 - PVD brown bronze colour – satiné H52 - PVD couleur doré H53 - PVD couleur doré mat H54 - PVD couleur doré satiné H49 - PVD couleur laiton H51 - PVD couleur laiton satiné H55 - PVD couleur nickel H56 - PVD couleur nickel mat H57 - PVD couleur nickel satiné F20 - PVD DORE
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705013

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork, single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates a single check valve cartridge. The inlet connections incorporate an EPDM rubber noise reducer. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1705013
  • Expiry date: 31/05/2022
  • Size: ¾” x ½” offset union
  • Marking: Sottini on body
  • Installation Requirements R001 R030
  • Model
    Valsura A6640AA
  • Factor: Ideal Standard International
    Company Name
    Ideal Standard International
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706328

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating members and self cancelling diverter to shower outlet. Supplied with shower hose and handset.The spout outlet incorporates a plastic aerator. The diverter outlet to the shower hose incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1706328
  • Expiry date: 30/06/2022
  • Size: ¾” BSP (M)
  • Marking: Roca etched on operating member
  • Installation Requirements R001 R030
  • Model
    A5A1860C00 - Targa, A5A1825C00 - Victoria (V2), A5A1807C00 - Monodin-n, A5A1809C00 - L20, A5A1827C00 - Logica, A5A1861C00 - Vectra, A5A1831C00 - Esmai, A5A1896C00 - Naia.
  • Manufacturer: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706353

Wall mounted, two hole, single outlet (fixed) combination tap assemb/ies (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating members and self cancelling diverter to shower outlet. Supplied with shower hose and handset.The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1706353
  • Expiry date: 30/06/2022
  • Size: ½” x ¾” offset unions
  • Marking: Roca etched on operating member
  • Installation Requirements R001 R030
  • Model
    A5A0109C0R – L20
  • Manufacturer: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706058

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a manual diverter controlling the flow between the spout outlet and the overhead shower with a dome type operating member, and a self-cancelling diverter that diverts flow between the spout outlet and the shower handset. Temperature is controlled independently by a thermostatic cartridge with a dome type operating member that includes a manual override button. The spout outlet incorporates a plastic flow straightener. Both inlets and the outlet to the shower handset incorporate a single check valve cartridge (suitable for backflow protection against fluid category 3). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1706058
  • Expiry date: 30/06/2022
  • Size: ½” x ¾” offset union
  • Marking: Grohe on top of body and on the shower handset.
  • Installation Requirements R001 R030
  • Model
    Grohe ‘Euphoria 180’ bath/shower system ½”, Grohe product no. 27.475, Grohe product no. 27.476.
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709058

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member that also incorporates a manual override button. The assembly incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate single check valve cartridges (suitable for backflow prevention up to fluid category 2) and stainless steel strainers. Supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1709058
  • Expiry date: 30/09/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (M)
  • Marking: Mariner logo and made in Italy on body.
  • Installation Requirements R001 R005 R030
  • Model
    1361
  • Manufacturer: Mariner Rubinetterie Srl
    Company Name
    Mariner Rubinetterie Srl
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710006

Wall mounted two hole, single outlet (fixed) combination tap assembly (brass with various finishes) incorporating a ceramic cartridge headworks controlling temperature and flow using a single lever operating member. The assembly also incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Shower outlet connection incorporates a single check valve cartridge (suitable for backflow prevention against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710006
  • Expiry date: 31/10/2022
  • Note: Not supplied with a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: AXOR Hansgrohe on top of body
  • Installation Requirements R001 R030
  • Model
    39 400 xxx AXOR Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710037

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (except model 170605). The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710037
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI logo on rear of body
  • Installation Requirements R001 R006 R030
  • Model
    900505, M33175, 100805, 100805A, 170605 & 111305.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710038

Floor mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose & handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710038
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI logo on back of body
  • Installation Requirements R001 R030
  • Model
    900525
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710042

Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Print This Approval


WRAS Approval Number: 1710303

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members.The assembly also incorporates a self-canceling diverter to shower outlet. The spout outlet incorporates a flow straightener. The products are also supplied with a shower hose, handset and retainer. Supplied with a metal back nut. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710303
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: T.K. on main body
  • Installation Requirements R001 R005 R030
  • Model
    K-968-H1 K-968-H2
  • Manufacturer: Tsangkuo Industrial Co Ltd
    Company Name
    Tsangkuo Industrial Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710313

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn rising ceramic disc headworks, single lever operating members and self cancelling diverter to shower outlet. Supplied with shower hose and handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710313
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: Lota on body
  • Installation Requirements R001 R006 R030
  • Model
    60827-5001, 60827-5101 & 60827-5201. 60131-5001 & 60131-5201. 62278-5001, 62278-5101 & 62278-5201. 62254-5001. 62242-5001, 62242-5101 & 62242-5201. 62316-5001. 62336-5001.
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711027

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with various operating members and a self-cancelling diverter to shower outlet. This product is supplied with a shower hose and handset. The inlet of the shower handset incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The Shao and Charleston spout outlets incorporate a plastic aerator. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1711027
  • Expiry date: 30/11/2022
  • Size: ¾” BSP Captive Nut
  • Marking: THG on the underside of the spout and on the shower handset.
  • Installation Requirements R001 R030
  • Model
    13SR/W 2 HOLE BATH / SHOWER MIXER SHOWER AND HOSE Styles: A04 - Broadway à manettes ; A1J - Amboise Malachite ; A1K - Amboise Lapis Lazuli ; A1L - Amboise Jaspe rouge ; A1M - Amboise Onyx noir ; A1S - Cheverny Malachite ; A1T - Cheverny Lapis Lazuli ; A1U - Cheverny Jaspe rouge ; A1V - Sully Malachite ; A1W - Sully Lapis Lazuli ; A1X - Sully Jaspe rouge ; A2A - Métropolis cristal clair ;A2B - Métropolis cristal clair à manettes ; A2C - Oceania ; A2E - Venice ; A2F - Naïade ; A2G - Ange ; A2H - Panthère cristal clair ; A2I - Perle ; A2J - Papillon ; A2K - Panthère cristal noir ; A2L - Métropolis cristal noir ; A2M - Métropolis cristal noir à manettes ; A2N - Mossi cristal clair ; A2R - Masque de Femme lunaire ; A2S - Masque de Femme solaire ; A2T - Masque de Femme, métal gravé ; A2U - Masque de Femme, métal lisse ; A33 - Bambou cristal noir ; A34 - Bambou cristal Ambre ; A35 - Bambou cristal clair ; A38 - Niagara ; A41 - Dahlia ; A42 – Pomme cristal clair satiné ; A46 - Pomme cristal lustré or ; A52 - Broadway ; A54 - Art Déco ; A55 - Art Déco à manettes ; A56 - Art Déco Cristal ; A57 - Tradition ; A58 - Tradition à manettes ; A59 - Tradition Cristal ; A60 - Marina Onyx noir ; A61 - Marina métal ; A6A - Profil métal ; A6B - Profil métal à manettes ; A6G - Profil Lalique cristal clair ; A6H - Profil Lalique cristal clair à manettes ; A6N - Profil Onyx noir ; A6P - Profil Onyx noir à manettes ; A7A - Ithaque décor Or ; A7B - Ithaque décor Platine ; A7D - Capucine mauve décor Or ; A7E - Capucine vert décor Platine ; A7F - Marquise noir décor Or ; A7G - Marquise blanc décor Platine ; A7L - Poèmes ; A8B - Vogue Améthyste ; A8H - Vogue Quartz rose ; A8M - Vogue Malachite ; A8N - Vogue Jaspe rouge ; A8P - Vogue Onyx noir ; A8R - Vogue Oeil de tigre ; A8S - Vogue Lapis Lazuli ; A9B - Jaipur cristal satiné ; A9C - Jaipur Onyx noir ; A9D - Jaipur Quartz rose ; A9F - Jaipur métal ; E53 - Najem ; G04 - Pure ; G08 - Pompadour ; G11 - Elysée ; G13 - Rochambeau ; G14 - Versailles ; G1T - Beluga ; G1U - Beluga à manettes ; G1V - Shao ; G1W - Shao à manettes ; G24 - Amour de Trianon ;G25 - 1900 ;G28 - 1900 à manettes ;G29 - Charleston ;G2J - Faubourg porcelaine blanche à manettes ;G2K - Faubourg porcelaine blanche ;G2L - Faubourg porcelaine noire ;G2M - Faubourg porcelaine noire à manettes ;G2N - Froufrou ; G2P - Froufrou à manettes ;G2R - Frivole ; G2S - Frivole à manettes ; G2T - Faubourg métal ; G2U - Faubourg métal à manettes ; G31 - Cygne ; G3N - Charleston à manettes métal lisse ; G47 - Vendôme ; G50 - Tango ; G58 - Spirit à manettes ; G64 - Primo ; G69 - Spirit ; G75 - Charleston à manettes ; G78 - Tendance ; G79 - Cubica ; G7A - Beaubourg ; G7B - Beaubourg à manettes ; G7C - Saint Germain ; G7D - Saint Germain à manettes ; G85 - Honfleur ; J06 - Pullman ; J17 - Beverley ; N21 - Victoria ; U1A - Mandarine métal ; U1D - Mandarine cristal clair ; U1E - Mandarine cristal clair satiné ; U1K - Mandarine Cristallia Diamant ; U1S - Sully Onyx blanc ; U1V - Cheverny Onyx noir ; U2D – Infini porcelaine blanche ; U2E – Infini porcelain blanche décor platine ; U2F – Infini Porcelaine blanche décor Or ; U4A - Diplomate bagues lisses ; U4B - Diplomate bagues annelées ; U4C - Diplomate bagues torsadées ; U4D - Diplomate Royale ; U4E - Duomo ; U4F - Duomo cristal ;U5A - Flore ;U5B - Island ;U5C - Paradise ;U5D - Sun Dragon ;U5E - Ginkgo ;U5F - Vegetal ;U5G - Moon Dragon ;U5H - Jade Dragon ;U5J - Rose ;U6A - Pétale de Cristal clair ;U6B - Pétale de Cristal bleu ;U6C - Pétale de Cristal rouge ;U6D - Pétale de Cristal noir ;U6E - Pétale de Cristal clair liseré doré ;U6L - Numéro 60 ;U7A - Trocadéro Malachite ;U7B - Trocadéro Lapis Lazuli ;U7C - Trocadéro Jaspe Rouge ; U7D - Trocadéro Onyx noir ; U7E - Trocadéro Oeil de Tigre ; U8A - Wedding ; U8B - Monte Carlo porcelaine or ; U8C - Monte Carlo porcelaine or blanc ; U93 - Malmaison métal ; U94 - Malmaison cristal ; U95 - Malmaison Portoro ; U96 - Malmaison Bianca carrara ; Finishes: A02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné ,F20 - PVD DORE A complete model number compiles of a three digit code from each section above, for example A04.13SR/W.A02. This would give you 2 HOLE BATH / SHOWER MIXER SHOWER AND HOSE WITHOUT CONNECTION - in Broadway à manettes style and polished chrome finish.
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711096

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self- cancelling diverter to shower outlet. The product is supplied with a shower hose and handset. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1711096
  • Expiry date: 30/11/2022
  • Size: ¾” BSP (M)
  • Marking: Bristan on operating member.
  • Installation Requirements R001 R005 R030
  • Model
    QD BSM C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709120

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member that also incorporates a manual override button. The assembly incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate single check valve cartridges (suitable for backflow prevention up to fluid category 2) and stainless steel strainers. Supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1709120
  • Expiry date: 30/09/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (M)
  • Marking: "Aqualisa" on body
  • Installation Requirements R001 R005 R030
  • Model
    485902 & 700295 COMBINATION TAP ASSEMBLIES
  • Factor: Aqualisa Products Ltd
    Company Name
    Aqualisa Products Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802038

Two hole, single outlet, wall mounted combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1802038
  • Expiry date: 28/02/2023
  • Size: ½” x ¾” offset unions
  • Marking: Kludi Rak on operating member. Date of manufacture (MM/YYYY) on rear of body.
  • Installation Requirements R001 R010 R040
  • Model
    RAK10002 Polaris
  • Factor: KLUDI RAK L.L.C
    Company Name
    KLUDI RAK L.L.C
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804053

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with brass back nuts and a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1804053
  • Expiry date: 30/04/2023
  • Size: ¾” BSP (M)
  • Marking: BRISTAN on operating member
  • Installation Requirements R001 R005 R030
  • Model
    CAD BSM C
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710153

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (except model 311094). The product is supplied with metal backnuts, a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710153
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: TP on operating member.
  • Installation Requirements R001 R006 R030
  • Model
    311094 - IFLO TOLOSA, 724739 - IFLO GARDA & 724768 - IFLO RENO.
  • Factor: Travis Perkins Plc
    Company Name
    Travis Perkins Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710390

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn rising ceramic disc headworks, single lever operating members and self cancelling diverter to shower outlet. Supplied with shower hose and handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710390
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: CROSSWATER LOGO ON BODY "SMALL X" ON REAR
  • Installation Requirements R001 R006 R030
  • Model
    MBPS422D, MBST422D & MBFW422D
  • Manufacturer: Crosswater Ltd.
    Company Name
    Crosswater Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805324

Hansgrohe ‘Metropol’ range of wall mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks with single lever operating members. The products incorporate a self-cancelling diverter to shower outlet and a plastic aerator in the spout outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1805324
  • Expiry date: 31/05/2023
  • Note: Not supplied with a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    Hansgrohe Metropol 32 540 xxx & 74 540 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805334

Wall mounted, concealed manual blending valve with brass body and a chrome plated trim set, incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling operated diverter, which directs the flow to a top outlet intended to supply a shower (not supplied) or a bottom outlet intended to supply a bath spout (not supplied). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Print This Approval


WRAS Approval Number: 1805002

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), Incorporating non-rising spindle headworks with either dome type or cross top operating members. The products also incorporate a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1805002
  • Expiry date: 31/05/2023
  • Size: ¾” BSP (M)
  • Marking: ‘Bristan’ on operating member
  • Installation Requirements R001 R005 R030
  • Model
    VAX BSM C & VAC LBSM C MT
  • Factor: Bristan Group Ltd.
    Company Name
    Bristan Group Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805012

‘CERAFLEX’ wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The product also incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the shower outlet connection incorporates a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection. The product is supplied with a shower hose and handset which incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1805012
  • Expiry date: 31/05/2023
  • Note: Model B1721AA is supplied without the shower hose and handset.
  • Size: ¾” BSP (M) x ½” BSP (M) offset union.
  • Marking: Ideal Standard logo on operating member
  • Installation Requirements R001 R030
  • Model
    B1722AA - CERAFLEX Model added May 2021: B1721AA
  • Factor: Ideal Standard International NV
    Company Name
    Ideal Standard International NV
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802322

Tradename: Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass incorporating ceramic cartridge headworks and manual diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge and dome type operating members. The spout outlets incorporate a plastic flow straightner. Inlet incorporates a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection Model A5A1109C0R – T-1000-T is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1802322
  • Expiry date: 28/02/2023
  • Size: ½” BSP x ¾” BSP (M) off-set union connection
  • Marking: Roca on body
  • Installation Requirements R001 R020
  • Model
    A5A1109C0R – T-1000-T. A5A1209C00 – T- 1000-T. A5A1118C00 – Victoria (V2) – T.
  • Manufacturer: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806009

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts, a shower hose and handset. The shower handset incorporates an approved single check valve cartridge (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1710169

Floor mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose & handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710169
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: TP ON REAR OF TAP BODY
  • Installation Requirements R001 R030
  • Model
    724742
  • Factor: Travis Perkins Plc
    Company Name
    Travis Perkins Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710170

Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Print This Approval


WRAS Approval Number: 1804013

Range of wall mounted two holes, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet connection incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60ºC.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1804013
  • Expiry date: 30/04/2023
  • Size: ½” X ¾” offset Unions
  • Marking: Dornbracht logo on body
  • Installation Requirements R001 R010 R040
  • Model
    33200845 & 52000031
  • Factor: Aloys F.Dornbracht GmbH & Co. KG
    Company Name
    Aloys F.Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807010

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork and single lever operating members. The product also features a self-cancelling diverter to shower outlet. The spout outlet incorporates a flow straightener and the product is supplied with a shower handset, hose and metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 1807012

Two hole, wall mounted, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with single lever operating member. Inlets and shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The inlets also incorporate stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60˚C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807012
  • Expiry date: 31/07/2023
  • Size: 15mm compression
  • Marking: Armitage Shanks on operating member
  • Installation Requirements R001 R030
  • Model
    A7004AA Contour 21+
  • Factor: Armitage Shanks
    Company Name
    Armitage Shanks
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807013

Two hole, deck mounted, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. Inlets and shower outlet incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate stainless-steel strainers. The spout outlet incorporates a plastic aerator and the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60˚C.

Print This Approval


WRAS Approval Number: 1807025

‘Axor Uno’ wall mounted, two hole, single outlet (fixed) combination tap assembly (brass body - in various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to a shower outlet. The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807025
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions
  • Marking: AXOR on body
  • Installation Requirements R001 r030
  • Model
    Axor Uno - 38 421 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807026

‘Hansgrohe Ecostat Select’ wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ½ turn ceramic disc headwork with a single lever operating member and self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member. The spout outlet incorporates a plastic aerator. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807026
  • Expiry date: 31/07/2023
  • Size: ½” BSP (M)
  • Marking: Hansgrohe logo on body
  • Installation Requirements R001 R030
  • Model
    Hansgrohe Ecostat Select - 13 141 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710152

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710152
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: TP on rear of body
  • Installation Requirements R001 R006 R030
  • Model
    100395, 148606 & 212347
  • Factor: Wickes Building Supplies Ltd.
    Company Name
    Wickes Building Supplies Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809003

Wall mounted two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes) incorporating a ceramic cartridge with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator the shower outlet incorporates an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809003
  • Expiry date: 30/09/2023
  • Note: Not supplied with a shower hose or handset
  • Size: ¾” – ½” BSP (M) offset connectors
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    32 420 xxx - Talis S: Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809005

Two hole, single outlet, wall mounted combination tap assembly with brass body (various finishes) incorporating ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809005
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset
  • Size: ½” x ¾” BSP (M) offset unions
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    31 340 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809028

Wall mounted two hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to the shower outlet. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809028
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” off set union.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    31 460 xxx Hansgrohe Metris S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809308

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The main body shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an interlocked shower hose and a shower handset (chromium plated plastic). The shower handset inlet incorporates a plastic flow restrictor. Maximum working pressure 10.0 Bar. Maximum working temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809308
  • Expiry date: 30/09/2023
  • Size: ½” x ¾” offset unions
  • Marking: Roca on operating member
  • Installation Requirements R001 R030
  • Model
    A5A0190C0R - Atlas
  • Manufacturer: Roca Sanitario SA
    Company Name
    Roca Sanitario SA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809358

Range of two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks, dome type operating members and manually operated diverter to shower outlet over head or hand held. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The spout outlet incorporates a plastic aerator. The product is supplied with an overhead shower, shower hose and handset. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809358
  • Expiry date: 30/09/2023
  • Size: ½” x ¾” offset unions
  • Marking: Grohe logo on main body, shower head and hand held shower outlet
  • Installation Requirements R001 R010 R040
  • Model
    Grohe Ntemp Cosmopolitan 210 - 26.223.001
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809311

‘Hansgrohe Novus’ range of wall mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809311
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” offset unions.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    Hangrohe Novus Range: 71 340 xxx & 71 040 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810024

Deck mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass or matte black) with a self-cancelling diverter to a shower outlet. The product incorporates a ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts, a PVC lined shower hose and chromium plated shower handset which is supplied with a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1810024
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (M)
  • Marking: METHVEN on left leg, handset and body. Satinjet on handset faceplate.
  • Installation Requirements R001 R006 R030
  • Model
    AMBSMCPUK Models added November 2019: AMBSMBK, ALBSMBK & ALBSMCP
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710389

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn rising ceramic disc headworks, single lever operating members and self cancelling diverter to shower outlet. Supplied with shower hose and handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710389
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: Swirl on rear of tap body
  • Installation Requirements R001 R006 R030
  • Model
    3619C
  • Factor: Watersmith (UK) Ltd.
    Company Name
    Watersmith (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812308

Grohe ‘Euphoria 260’ wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a rotary headwork both controlling and diverting the flow between the spout outlet and the overhead shower using a dome type operating member. The product also incorporates a self-cancelling diverter to the hand shower outlet. Temperature is controlled independently via thermostatic cartridge using a dome type operating member that incorporates a manual override button. The spout outlet incorporates a plastic flow straightener. The tap inlet and the shower outlet connection incorporates an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1812308
  • Expiry date: 31/12/2023
  • Size: ½” x ¾” BSP (M) offset union.
  • Marking: Grohe & date of manufacture yy-mm-dd on valve body, shower outlets and hose ferrule.
  • Installation Requirements R001 R030
  • Model
    Grohe ‘Euphoria 260’ – 26.114.001
  • Manufacturer: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901364

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork, with single lever operating members, controlling both flow and temperature and a self-cancelling to shower outlet. The inlets incorporate a stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1901364
  • Expiry date: 31/01/2024
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” BSP(M)
  • Marking: Solex & WRAS on body
  • Installation Requirements R001 R030
  • Model
    B55960
  • Manufacturer: XIAMEN Solex High-Tech Industries Co.Ltd
    Company Name
    XIAMEN Solex High-Tech Industries Co.Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901025

Deck mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose, shower handset and plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1901025
  • Expiry date: 31/01/2024
  • Size: ¾” BSP (M)
  • Marking: LOTA on front of left leg
  • Installation Requirements R001 R006 R030
  • Model
    62908-5201
  • Manufacturer: Xiamen Lota International Co. Ltd.
    Company Name
    Xiamen Lota International Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901026

Deck mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. The product is supplied with a shower hose, handset and plastic backnuts. The product incorporates a plastic flow regulator on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1901026
  • Expiry date: 31/01/2024
  • Size: ¾” BSP (M)
  • Marking: LOTA on front of left leg
  • Installation Requirements R001 R006 R030 R160
  • Model
    62794-5101
  • Manufacturer: Xiamen Lota International Co. Ltd.
    Company Name
    Xiamen Lota International Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709143

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member that also incorporates a manual override button. The assembly incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate single check valve cartridges (Incorporates an approved check valve cartridge, however the complete assembly has not been fully tested to demonstrate that it provides backflow protection.) and stainless steel strainers. Supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1709143
  • Expiry date: 30/09/2022
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (M)
  • Marking: BRISTAN ON FRONT OF TAP
  • Installation Requirements R001 R005 R030
  • Model
    AS2 THBSM C & DUL3 THBSM C
  • Factor: Bristan Group Limited
    Company Name
    Bristan Group Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903010

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is fitted with metal backnuts. The product is also supplied with a shower hose and handset.. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1903010
  • Expiry date: 31/03/2024
  • Size: ¾” BSP (M)
  • Marking: ISI on operating members. Ideal Standard logo on the shower handset.
  • Installation Requirements R001 R006 R030
  • Model
    BC263AA - Opus
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901404

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork, with single lever operating members, controlling both flow and temperature and a self-cancelling to shower outlet. The inlets incorporate a stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1901404
  • Expiry date: 31/01/2024
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” BSP(M)
  • Marking: Kingfisher Good Home Logo on rear of body
  • Installation Requirements R001 R030
  • Model
    3663602665052
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904010

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass finish), incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1904010
  • Expiry date: 30/04/2024
  • Size: ¾” BSP (M)
  • Marking: Ottanta Otto on rear of body.
  • Installation Requirements R001 R006 R030
  • Model
    91 6366-1 01 & 91 6367-1 01
  • Factor: Jiangmen Ottanta Otto Faucet Co. Ltd.
    Company Name
    Jiangmen Ottanta Otto Faucet Co. Ltd.
    View All Listings by this Company
  • Manufacturer: Kaiping Lai Da Faucet Co. Ltd.
    Company Name
    Kaiping Lai Da Faucet Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901066

Deck mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose, shower handset and plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1901066
  • Expiry date: 31/01/2024
  • Size: ¾” BSP (M)
  • Marking: KINGFISHER "GOOD HOME LOGO" ON REAR OF TAP BODY
  • Installation Requirements R001 R006 R030
  • Model
    3663602665694
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901065

Deck mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. The product is supplied with a shower hose, handset and plastic backnuts. The product incorporates a plastic flow regulator on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1901065
  • Expiry date: 31/01/2024
  • Size: ¾” BSP (M)
  • Marking: Kingfisher "Good Home" logo on rear of tap body
  • Installation Requirements R001 R006 R030 R160
  • Model
    3663602665359
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905356

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and self-cancelling operated diverter to shower outlet. The spout outlet is a water fall design and the product is supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1905356
  • Expiry date: 31/05/2024
  • Size: ¾” BSP(M)
  • Marking: Xindong Logo on body
  • Installation Requirements R001 R006 R160
  • Model
    T2301S
  • Manufacturer: Zhejiang Xindong Sanitary Ware Co.,Ltd.
    Company Name
    Zhejiang Xindong Sanitary Ware Co.,Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905362

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1905362
  • Expiry date: 31/05/2024
  • Note: No testing on pop-up waste.
  • Size: ¾” x ½” BSP(M) off set union
  • Marking: Gaoao on body
  • Installation Requirements R001 R030
  • Model
    YA3000, YA3410 & YA3412
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903019

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1903019
  • Expiry date: 31/03/2024
  • Size: ¾” BSP (M)
  • Marking: ISI on rear of body
  • Installation Requirements R001 R006 R030
  • Model
    BC189AA CERALINE 2 HOLE BATH SHOWER MIXER.
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905009

Deck mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with dome type operating members and a self-cancelling diverter. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts, shower hose and handset (which incorporates a plastic flow restrictor). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1905009
  • Expiry date: 31/05/2024
  • Size: ¾” BSP (M)
  • Marking: ISI on rear of tap body
  • Installation Requirements R001 R006 R030
  • Model
    B1823AA Ceraflex 2H Dual Control Bath Shower Mixer with Shower Set
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1708713

two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members, and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts also supplied with a flow regulator, intended for installation at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1708713
  • Expiry date: 31/08/2022
  • Size: ¾” BSP (M).
  • Marking: SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
  • Installation Requirements R001 R005 R030
  • Model
    C58117
  • Factor: Wolseley
    Company Name
    Wolseley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805116

two hole, single outlet (fixed) combination tap assembly (chromium plated brass), Incorporating non-rising spindle headwork with either dome type or cross top operating members. The products also incorporate a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1805116
  • Expiry date: 31/05/2023
  • Size: ¾” BSP (M)
  • Marking: SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
  • Installation Requirements R001 R005 R030
  • Model
    C58102
  • Factor: Wolseley
    Company Name
    Wolseley
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906085

Range of two-hole, single outlet combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. Models 63195-5001 and 62638-5101 incorporate a plastic aerator in the spout outlet and the products are supplied with metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1906085
  • Expiry date: 30/06/2024
  • Size: ¾” BSP (M)
  • Marking: Lota on body
  • Installation Requirements R001 R006 R030
  • Model
    62638-5101, 62914-5101 & 63195-5001
  • Manufacturer: Xiamen Lota International Co. Ltd.
    Company Name
    Xiamen Lota International Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905397

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1905397
  • Expiry date: 31/05/2024
  • Note: No testing on pop-up waste.
  • Size: ¾” x ½” BSP(M) off set union
  • Marking: KINGFISHER GOOD HOME LOGO ON REAR OF TAP BODY
  • Installation Requirements R001 R030
  • Model
    3663602665021, 3663602665014 & 3663602665038
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907055

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The product also features a self-cancelling diverter to shower outlet. The product is supplied with a shower handset, hose and metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1907055
  • Expiry date: 31/07/2024
  • Size: ¾” BSP (M)
  • Marking: Lota on rear of body
  • Installation Requirements R001 R006 R030
  • Model
    62252-5001 & 62252-5101
  • Manufacturer: Xiamen Lota International Co. Ltd.
    Company Name
    Xiamen Lota International Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907348

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The (rotating) spout outlet incorporates a plastic aerator. Both inlets incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1907348
  • Expiry date: 31/07/2024
  • Note: Shower hose and handset are not supplied as part of this approval
  • Size: ½” x ¾” offset union.
  • Marking: Vitra and date of manufacture (YY/MM) on body
  • Installation Requirements R001 R030
  • Model
    SUIT L A42488EXP
  • Manufacturer: Eczacibasi Building Materials VITRA Faucet Division
    Company Name
    Eczacibasi Building Materials VITRA Faucet Division
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807095

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork and single lever operating members. The product also features a self-cancelling diverter to shower outlet. The spout outlet incorporates a flow straightener and the product is supplied with a shower handset, hose and metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807095
  • Expiry date: 31/07/2023
  • Size: ¾” BSP (M)
  • Marking: INSTINCT (BRAND OF PHG) ON OPERATING MEMBER
  • Installation Requirements R001 R005 R030
  • Model
    4E1006 DELLA COMBINATION TAP ASSEMBLY
  • Factor: PHG
    Company Name
    PHG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909019

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset and plastic backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1909019
  • Expiry date: 30/09/2024
  • Size: ¾” BSP (M)
  • Marking: LOTA on rear of body.
  • Installation Requirements R001 R006 R030
  • Model
    62638-5001
  • Manufacturer: Xiamen Lota International Co., Ltd
    Company Name
    Xiamen Lota International Co., Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909072

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator (except for model 62914-5001). The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1909072
  • Expiry date: 30/09/2024
  • Size: ¾” BSP (M)
  • Marking: LOTA on left inlet leg.
  • Installation Requirements R001 R006 R030
  • Model
    62902-5101 62905-5001 62908-5001 62908-5101 62908-536801 62914-5001
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907356

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1907356
  • Expiry date: 31/07/2024
  • Note: This approval does not include a shower hose and handset, overhead shower or bath spout.
  • Size: ¾” BSP (F)
  • Marking: AXOR on face plate
  • Installation Requirements R001 R010 R040
  • Model
    46 420 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination, 46 421 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination – Diamond cut, 46 450 xx0 AXOR Edge Single lever bath mixer for concealed installation, 46 451 xx0 AXOR Edge Single lever bath mixer for concealed installation – Diamond cut. To be used in conjuction with I-Box 01700180 Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906127

Range of two-hole, single outlet combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. Model 424852 incorporates a plastic aerator in the spout outlet and the products are supplied with metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1906127
  • Expiry date: 30/06/2024
  • Size: ¾” BSP (M)
  • Marking: IFLO ON REAR OF BADY
  • Installation Requirements R001 R006 R030
  • Model
    424817 IFLO TAY BATH SHOWER MIXER & 424852 IFLO BELAYA BATH SHOWER MIXER
  • Factor: City Plumbing Supplies/ Plumbing Trade Supplies
    Company Name
    City Plumbing Supplies/ Plumbing Trade Supplies
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807096

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork and single lever operating members. The product also features a self-cancelling diverter to shower outlet. The spout outlet incorporates a flow straightener and the product is supplied with a shower handset, hose and metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2001066

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The assembly incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2001066
  • Expiry date: 31/01/2025
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP captive nut
  • Marking: Aqualona on rear of body
  • Installation Requirements R001 R030
  • Model
    18705
  • Factor: Aqualona Products Ltd
    Company Name
    Aqualona Products Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003020

Deck mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass, matt black or brushed brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a shower hose, handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2003020
  • Expiry date: 31/03/2025
  • Size: ¾” BSP (M)
  • Marking: Lota on rear of tap inlet leg
  • Installation Requirements R001 R006 R030
  • Model
    63189-5001, 63189-506801 & 63189-504408.
  • Manufacturer: Xiamen Lota International Co. Ltd.
    Company Name
    Xiamen Lota International Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805118

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), Incorporating non-rising spindle headworks with a dome type operating member. The products also incorporate a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1805118
  • Expiry date: 31/05/2023
  • Size: ¾” BSP (M)
  • Marking: ‘ALTERNA ON OPERATING MEMBER & H & DATE OF MANUFACTURE MM/YY ON REAR OF TAP BODY
  • Installation Requirements R001 R005 R030
  • Model
    TRDCBHSM COMBINATION TAP ASSEMBLIES.
  • Factor: Saint-Gobain Building Distribution Ltd
    Company Name
    Saint-Gobain Building Distribution Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004329

Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener (BRBSMCPUK model) or a plastic aerator (AOBSMCPUK model). The products are supplied with metal backnuts. The shower hose incorporates a stainless steel strainer and the shower handset inlet incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2004329
  • Expiry date: 30/04/2025
  • Size: ¾” BSP (M)
  • Marking: Methven logo on body and operating member.
  • Installation Requirements R001 R006 R030
  • Model
    BRBSMCPUK & AOBSMCPUK Model added June 2020: CABSMCPUK
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004336

Two hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2004336
  • Expiry date: 30/04/2025
  • Size: ¾” BSP (M)
  • Marking: Methven on body Marking from November 2020: DTC53 (brand of Methven) on rear of body. Methven on left leg.
  • Installation Requirements R001 R006 R030
  • Model
    WAIBSMCPUK From November 2020 the following new finishes have been added: WAIBSMCPUK: WAIBSMBB - Brushed Brass WAIBSMBK - Matte Black WAIBSMBN - Brushed Nickel WAIBSMGM - Gunmetal
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003073

Deck mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass, matt black or brushed brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a shower hose, handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2003073
  • Expiry date: 31/03/2025
  • Size: ¾” BSP (M)
  • Marking: Bathroom Brands logo on rear of tap
  • Installation Requirements R001 R006 R030
  • Model
    HOX.008CP, HOX.008MB & HOX.008BB COMBINATION TAP ASSEMBLIES
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710217

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710217
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: EBB & FLO ON BODY
  • Installation Requirements R001 R006 R030
  • Model
    20561 BRAYE BATH SHOWER COMBINATION TAP ASSEMBLIES
  • Factor: TOOLSTATION LTD
    Company Name
    TOOLSTATION LTD
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909118

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator (except for model 8267P). The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1909118
  • Expiry date: 30/09/2024
  • Size: ¾” BSP (M)
  • Marking: WATERSMITH LOGO ON FRONT OF BODY
  • Installation Requirements R001 R006 R030
  • Model
    6038P & 8267P COMBINATION TAP ASSEMBLIES
  • Factor: Watersmith (UK) Ltd.
    Company Name
    Watersmith (UK) Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007321

Two hole, single outlet (fixed) combination tap assembly with brass body (various finishes). Incorporating quarter turn ceramic disc headworks with single lever, dome or cross top operating members and self canceling diverter to shower outlet. The spout outlets incorporate plastic flow straighteners. This approval includes a hose, handset and wall bracket and the products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2007321
  • Expiry date: 31/07/2025
  • Size: ¾” BSP (M)
  • Marking: DTC53 (brand of Methven) on rear of body.
  • Installation Requirements R001 R005 R030
  • Model
    DAR106
  • Factor: Methven UK Ltd
    Company Name
    Methven UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010001

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose, shower handset and metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2010019

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2010028

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2010038

Wall mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with dome type operating members, the temperature is controlled independently via a thermostatic cartridge with single lever operating members with a manual override button and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Inlets incorporate stainless steel strainers approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2010038
  • Expiry date: 31/10/2025
  • Size: ¾” x ½” BSP (M) offset unions.
  • Marking: Zhejiang Xindong Sanitary Ware logo on body.
  • Installation Requirements R001 R030
  • Model
    T41001
  • Manufacturer: Zhejiang Xindong Sanitary Ware Co.,Ltd
    Company Name
    Zhejiang Xindong Sanitary Ware Co.,Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010040

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headworks with single lever operating member and self-cancelling diverter to shower outlet. The inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2010040
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M) x ½” BSP (M) offset union.
  • Marking: Gaoao on rear of body.
  • Installation Requirements R001 R030
  • Model
    YA3580 YA3590
  • Manufacturer: Zhejiang Gaoao Sanitary Ware Co. Ltd.
    Company Name
    Zhejiang Gaoao Sanitary Ware Co. Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011050

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or an optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2010085

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2010085
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M)
  • Marking: Instinct on operating member.
  • Installation Requirements R001 R006 R030
  • Model
    4E1155 ESPADA BSM - COMBINATION TAP ASSEMBLIES
  • Factor: PHG
    Company Name
    PHG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010086

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose, shower handset and metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2010088

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2010088
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M)
  • Marking: INSTINCT ON OPERATING MEMBER
  • Installation Requirements R001 R006 R030
  • Model
    4E1286 - ELION DESK BSMCOMBINATION TAP ASSEMBLIES
  • Factor: PHG
    Company Name
    PHG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011088

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or an optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2011088
  • Expiry date: 30/11/2025
  • Size: ¾” BSP (M)
  • Marking: INSTINCT on operating member.
  • Installation Requirements R001 R005 R030
  • Model
    4E1124 - PARAGON BATH SHOWER MIXER
  • Factor: PHG
    Company Name
    PHG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011090

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or an optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Print This Approval


WRAS Approval Number: 2010089

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2010089
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M)
  • Marking: Esteem on operating member.
  • Installation Requirements R001 R006 R030
  • Model
    E60075 KISDON H PATTERN BATH FILLER & SHOWER MIXER COMBINATION TAP ASSEMBLIES
  • Factor: Plumbing and Heating Ltd
    Company Name
    Plumbing and Heating Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012021

Two-hole, single outlet, (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2012021
  • Expiry date: 31/12/2025
  • Size: ½” by ¾” BSP (M) Offset Unions.
  • Marking: AXOR (brand of Hansgrohe) on body.
  • Installation Requirements R001 R030
  • Model
    10 411 xxx AXOR Starck Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012306

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork, single lever operating members and self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. The product includes a shower hose and handset. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2012306
  • Expiry date: 31/12/2025
  • Size: ¾” BSP (M).
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R030
  • Model
    M1005
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105001

Two-hole, single outlet, (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2105001
  • Expiry date: 31/05/2026
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R030
  • Model
    M4005SL
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010090

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose, shower handset and metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2010090
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M)
  • Marking: Esteem on operating member.
  • Installation Requirements R001 R006 R030
  • Model
    E60070 VETTIS H PATTERN BATH & SHOWER MIXER COMBINATION TAP ASSEMBLIES
  • Factor: PHIL- PLUMBING AND HEATING INVESTMENTS LIMITED
    Company Name
    PHIL- PLUMBING AND HEATING INVESTMENTS LIMITED
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011106

Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener or an optional aerator. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2011106
  • Expiry date: 30/11/2025
  • Size: ¾” BSP (M)
  • Marking: Esteem on operating member.
  • Installation Requirements R001 R005 R030
  • Model
    E60059 CANIM BATH & SHOWER MIXER
  • Factor: PHIL- PLUMBING AND HEATING INVESTMENTS LIMITED
    Company Name
    PHIL- PLUMBING AND HEATING INVESTMENTS LIMITED
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109304

Range of two hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating quarter turn ceramic disc headworks, cross top operating members and self cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2109304
  • Expiry date: 30/09/2026
  • Size: ¾” BSP (M)
  • Marking: Bathroom Brands logo (stylised B) on rear of body.
  • Installation Requirements R001 R030 R040
  • Model
    RIV4 CHR – Chrome plated RIV4 GOLD – Gold finish
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of