Plas4 Universal range of plastic compression fittings with polypropylene bodies incorporating nitrile `O` rings. The fittings are intended for connecting metric polyethylene pipe (manufactured in accordance with BS 6572 and 6730), imperial polyethylene pipe (manufactured in accordance with BS 1972 & BS 3284), copper pipe, galvanised steel pipe and lead pipe. Fittings are for above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1706342
• Expiry date: 30/06/2022
• Size: 15mm compression id Copper pipe 35mm compression Copper tube 22mm compression Copper tube ½” id Lead pipe compression ¾” id Lead pipe compression DN15 21.4mm od Galvanised compression DN25 33.8mm od Galvanised compression ½” od Polyethelene imperial compression 1” od Polyethelene imperial compression
• Marking: Plasson, Size and PPB moulded on shoulder, with date clock on body.
• Installation Requirements R001
• Model
  Plas4 Universal range: 77017251 – Coupler Plass4 25 x 15-22 (S) 77017252 – Coupler Plass4 25 x 20-27 (M) 77017253 – Coupler Plass4 25 x 27-35 (L) 77057251 – Elbow Plass4 25 x 15-22 77057252 – Elbow Plass4 25 x 20-27 77057253 – Elbow Plass4 25 x 27-35
• Manufacturer: Plasson UK Ltd
  Company Name

  Plasson UK Ltd
  View All Listings by this Company

‘Supreme S16’ range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707307
• Expiry date: 31/07/2022
• Size: 20mm to 110mm
• Marking: Supreme, Size, W, KIWA & Made in italy on compression shoulder. Date of manufacture (clock format) on body.
• Installation Requirements R001
• Model
  Supreme S16 range: 90° Increasing tee, 90° Decreasing tee, 90° Tee, 90° Tee with female thread, 90° Tee with male thread, Male adaptor, Female adaptor, Straight coupling, Repair coupling, Reducing coupling, Plug, 90° Elbow, 90° Elbow with female thread, 90° Elbow with male thread, Victaulic, Flange adaptor, Wall plate elbow & Pipe liner.
• Manufacturer: Sab SpA
  Company Name

  Sab SpA
  View All Listings by this Company

Range of black coloured, PE100 butt fusion fittings for use with PE100 pipes (manufactured to EN 12201). Maximum working pressure for fittings used with SDR11 pipe is 16.0 bar and for fittings used with SDR17 pipe is 10.0 bar. For above and below ground use. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707060
• Expiry date: 31/07/2022
• Size: SDR11: 32mm to 315 SDR17: 50mm to 315
• Marking: Unidelta, PE100, size, SDR11 OR SDR17 and made in Italy on the body.
• Installation Requirements R001
• Model
  To be used with SDR11 pipe: 3145 stub end, 3140 reducer, 3141 90° elbow, 3142 45° elbow, 3143 90° tee & 3144 cap. To be used with SDR17 pipe: 3155 stub end, 3151 90° elbow, 3152 45° elbow, 3153 90° tee & 3154 cap tee. Model added September 2017 to be used with SDR17 pipe: 3150 reducer.
• Manufacturer: Unidelta SpA
  Company Name

  Unidelta SpA
  View All Listings by this Company

Range of Polyfast compression fittings with polypropylene bodies and EPDM O-rings, for use with PE80 & PE100 pipes (manufactured to BS EN 12201:2). Maximum working pressures: 16 bar when used with PE100 pipe & 12.5 bar when used with PE80 pipe. Cold water use only. For above and below ground use

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707061
• Expiry date: 31/07/2022
• Note: Inserts are supplied and to be used with these fittings.
• Size: 20, 25, 32 & 40mm
• Marking: Polypipe name and logo, pressure rating and size on compression nut.
• Installation Requirements R001
• Model
  Polyfast range.
• Factor: Polypipe Building Products Ltd
  Company Name

  Polypipe Building Products Ltd
  View All Listings by this Company

Range of Polyfast compression fittings with acetal bodies and EPDM O-rings, for use with PE80 & PE100 pipes (manufactured to BS EN 12201:2). Maximum working pressures: 16 bar when used with PE100 pipe & 12.5 bar when used with PE80 pipe. Cold water use only. For above and below ground use

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707063
• Expiry date: 31/07/2022
• Note: R008 (to be installed where light is excluded) applies only to the reducing sets. Inserts are supplied and to be used with these fittings.
• Size: 20, 25, 32, 50 & 63mm
• Marking: Polypipe name and logo, PN16 and size on compression nut.
• Installation Requirements R001 R008
• Model
  Polyfast range.
• Manufacturer: Polypipe Building Products Ltd
  Company Name

  Polypipe Building Products Ltd
  View All Listings by this Company

Range of universal compression fittings with plastic bodies for use with imperial PE pipe (manufactured to BS1972 & BS3284 Classes C & D) and metric PE pipe (manufactured to BSEN12201: 2). Maximum working pressure 12.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1709377
• Expiry date: 30/09/2022
• Size: ½” to 2” (ID) & 20mm to 63mm
• Marking: Plasson, size and date clock moulded on body and nut.
• Installation Requirements R001
• Model
  7404 – Imperial Coupling (½”-2”); 7418 – Metric to Imperial Slip Coupling (½”-2” & 20mm-63mm); 7428 – Imperial to BSP (M) Adaptor (½”-2”); 7444 – Imperial Tee (½”-2”); 7454 – Imperial Elbow (½”-2”); 7474 – Imperial to BSP (F) elbow (½”-¾”); 7478 – Metric to Imperial 90° elbow (½”-2” & 20mm-63mm) & 7494 – Imperial to BSP (M) elbow (½”-¾”)
• Factor: Plasson UK Ltd
  Company Name

  Plasson UK Ltd
  View All Listings by this Company

Range of spigot reducers and end caps with polyethylene bodies. Intended for use with ‘Polyfast’ compression fittings. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1709080
• Expiry date: 30/09/2022
• Marking: Polypipe logo, PN and size on body.
• Installation Requirements R001
• Model
  Spigot reducers: 3085020 50mm x 20mm 3085025 50mm x 25mm 3085032 50mm x 32mm 3086320 63mm x 20mm 3086325 63mm x 25mm 3086332 63mm x 32mm Stop Ends: 30920 20mm 30925 25mm 30932 32mm 30940 40mm 30950 50mm 30963 63mm
• Manufacturer: Polypipe Building Products Ltd
  Company Name

  Polypipe Building Products Ltd
  View All Listings by this Company

SAB A16 Range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707398
• Expiry date: 31/07/2022
• Size: 20mm to 110mm
• Marking: Models A16 - SAB on body
• Installation Requirements R001
• Model
  SAB A16 RANGE
• Factor: Sab SpA
  Company Name

  Sab SpA
  View All Listings by this Company

‘Floplast Supreme’ range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707399
• Expiry date: 31/07/2022
• Size: 20mm to 110mm
• Marking: Supreme on body
• Installation Requirements R001
• Model
  Floplast Supreme Range of fittings
• Factor: FloPlast Ltd
  Company Name

  FloPlast Ltd
  View All Listings by this Company

AVK Pentomech range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707400
• Expiry date: 31/07/2022
• Size: 20mm to 110mm
• Marking: AVK on body
• Installation Requirements R001
• Model
  AVK PENTOMECH part numbers and descriptions: Mech Coupler 1110/01 Mech Repair Coupler 1110/02 Mech Reducing Coupler 1110/03 Mech End Cap 1110/04 Mech Female Adaptor 1110/05 Mech Male Adaptor 1110/06 Mech Equal Tee 1110/07 Mech Female Tee 1110/08 Mech Male Tee 1110/09 Mech Red Tee 1110/10 Mech Enlarge Tee 1111/11 Mech 90° Elbow 1110/12 Mech Female Elbow 1110/13 Mech Male Elbow 1110/14 Mech Flange Adap 1110/15
• Factor: AVK UK Ltd
  Company Name

  AVK UK Ltd
  View All Listings by this Company

‘CONNECTO +ULTRA’ range of plastic compression fittings incorporating NBR or EPDM ‘O’-rings for use with PE100 pipe (manufactured to EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1712054
• Expiry date: 31/12/2022
• Size: 20mm - 63mm.
• Marking: Irritec, PN and size on the compression nut, PP-B and (mm,yy) on fitting body.
• Installation Requirements R001
• Model
  401 - female adaptor DN: 20 x ½”, 20 x ¾”, 20 x 1", 25 x ½”, 25 x ¾”, 25 x 1", 32 x ½”, 32 x ¾” , 32 x 1", 32 x 1¼”, 40 x 1", 40 x 1¼”, 40 x 1½”, 50 x 1¼”, 50 x 1½” , 50 x 2", 63 x 1¼”, 63 x 1½”, 63 x 2”. 410 – coupling DN: 20, 25, 32, 40, 50 and 63. 411 - male adaptor DN: 20 x ½”, 20 x ¾”, 20 x 1”, 25 x ½”, 25 x ¾”, 25 x 1”, 32 x ¾”, 32 x 1”, 32 x 1¼”, 40 x 1”, 40 x 1¼”, 40 x 1½”, 50 x 1”, 50 x 1¼”, 50 x 1½”, 50 x 2”, 63 x 1½”, 63 x 2”, 63 x 2½”. 412 - reducer coupling DN: 20 x 16, 25 x 20, 32 x 25, 40 x 25, 40 x 32, 50 x 20, 50 x 25, 50 x 32, 50 x 40, 63 x 32, 63 x 40, 63 x 50. 413 - 90° elbow DN: 20, 25, 32, 40, 50, 63. 414 - 90° Tee DN: 20 x 20 x 20, 25 x 25 x 25, 32 x 32 x 32, 40 x 40 x 40, 50 x 50 x 50, 63 x 63 x 63. 415 - 90° Tee with female threaded offtake DN: 20 x ½” x 20, 20 x ¾” x 20, 25 x ½” x 25, 25 x ¾” x 25, 25 x 1” x 25, 32 x ½” x 32, 32 x ¾” x 32, 32 x 1” x 32, 32 x 1” ¼ x 32, 40 x 1” x 40, 40 x 1¼” x 40, 40 x 1½” x 40, 50 x 1¼” x 50, 50 x 1½” x 50, 50 x 2” x 50, 63 x 1½” x 63, 63 x 2” x 63. 416 - 90° Tee with male threaded offtake DN: 20 x ½” x 20, 20 x ¾” x 20, 25 x ½” x 25, 25 x ¾” x 25, 25 x 1” x 25, 32 x ¾” x 32, 32 x 1” x 32, 32 x 1¼” x 32, 40 x 1¼” x 40, 40 x 1½”, x 40, 50 x 1½” x 50, 50 x 2” x 50, 63 x 2” x 63. 418 - 90° elbow female threaded offtake DN: 20 x ½”, 20 x ¾”, 25 x ½”, 25 x ¾”, 25 x 1”, 32 x ¾”, 32 x 1”, 32 x 1¼”, 40 x 1”, 40 x 1¼”, 50 x 1”, 50 x 2”, 63 x 1”, 63 x 2”. 419 - 90° elbow male threaded offtake DN: 20 x ½”, 20 x ¾”, 25 x ½”, 25 x ¾”, 25 x 1", 32 x ¾”, 32 x 1”, 32 x 1¼” , 40 x 1”, 40 x 1¼”, 40 x 1½”, 50 x 1½”, 50 x 2”, 63 x 2”, 63 x 2½”. 421 - End plug DN: 20, 25, 32, 40, 50, 63. 423 - Wall plate elbow DN: 20 x ½", 25 x ¾". 424 - Reduced 90° Tee 20 x 16 x 20, 20 x 25 x 20, 25 x 20 x 25, 25 x 32 x 25, 32 x 25 x 32, 40 x 32 x 40, 50 x 40 x 50, 63 x 50 x 63.
• Manufacturer: Irritec S.p.A
  Company Name

  Irritec S.p.A
  View All Listings by this Company

‘Elysee Agriflow’ range of plastic compression fittings with polypropylene bodies for use with polyethylene pipe (IS 134 type 32 and IS134 type 50). Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1905380
• Expiry date: 31/05/2024
• Size: ½” – 2” BSP (M).
• Marking: Elysee Irrigation Ltd. on body.
• Installation Requirements R001
• Model
  ELYSEE Agriflow range.
• Manufacturer: Elysee Irrigation Ltd.
  Company Name

  Elysee Irrigation Ltd.
  View All Listings by this Company

Range of compression fittings with polypropylene bodies, nuts, acetal grip rings, EPDM ‘O’-rings and plastic pipe liners for use with MDPE pipe manufactured to BS EN 12201. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2009337
• Expiry date: 30/09/2025
• Note: The supplied pipe liners must be installed to maintain the validity of this approval.
• Size: 20-63mm compression. ½”-2” BSP (M) or (F)
• Marking: Manufacturers name, size and date of manufacture (clock format) on body.
• Installation Requirements R001
• Model
  Couplers: 20.41.2005.020: 20mm 20.41.2005.025: 25mm 20.41.2005.032: 32mm 20.41.2005.040: 40mm 20.41.2005.050: 50mm 20.41.2005.063: 63mm Reducing Couplers: 20 41 2007 005: 25mm x 20mm 20 41 2007 009: 32mm x 20mm 20 41 2007 010: 32mm x 25mm 20 41 2007 015: 40mm x 32mm 20 41 2007 019: 50mm x 32mm 20 41 2007 020: 50mm x 40mm 20 41 2007 023: 63mm x 32mm 20 41 2007 024: 63mm x 40mm 20 41 2007 025: 63mm x 50mm Male Adaptors - Male BSP Thread: 20 41 2037 005: 20mm x ½” 20 41 2037 010: 20mm x ¾” 20 41 2037 011: 20mm x 1” 20 41 2037 015: 25mm x ½” 20 41 2037 020: 25mm x ¾” 20 41 2037 025: 25mm x 1” 20 41 2037 030: 32mm x ¾” 20 41 2037 035: 32mm x 1” 20 41 2037 040: 32mm x 1¼ 20 41 2037 042: 40mm x 1” 20 41 2037 045: 40mm x 1¼” 20 41 2037 046: 40mm x 1½” 20 41 2037 049: 50mm x 1¼” 20 41 2037 050: 50mm x 1½” 20 41 2037 052: 50mm x 2” 20 41 2037 053: 63mm x 1½” 20 41 2037 055: 63mm x 2” Female Adaptors - Female BSP Thread: 20 41 2065 005: 20mm x ½” 20 41 2065 010: 20mm x ¾” 20 41 2065 019: 25mm x ½” 20 41 2065 020: 25mm x ¾” 20 41 2065 022: 25mm x 1” 20 41 2065 033: 32mm x ½” 20 41 2065 034: 32mm x ¾” 20 41 2065 035: 32mm x 1” 20 41 2065 036: 32mm x 1¼” 20 41 2065 044: 40mm x 1” 20 41 2065 045: 40mm x 1¼” 20 41 2065 046: 40mm x 1½” 20 41 2065 049: 50mm x 1¼” 20 41 2065 050: 50mm x 1½” 20 41 2065 051: 50mm x 2” 20 41 2065 054: 63mm x 1½” 20 41 2065 055: 63mm x 2” Elbow 90°: 20 41 2001 020: 20mm 20 41 2001 025: 25mm 20 41 2001 032: 32mm 20 41 2001 040: 40mm 20 41 2001 050: 50mm 20 41 2001 063: 63mm Elbow 90° Female BSP Thread: 20 41 2002 005: 20mm x ½’ 20 41 2002 006: 20mm x ¾” 20 41 2002 009: 25mm x ½” 20 41 2002 010: 25mm x ¾” 20 41 2002 011: 25mm x 1” 20 41 2002 013: 32mm x ¾” 20 41 2002 015: 32mm x 1” 20 41 2002 019: 40mm x 1” 20 41 2002 020: 40mm x 1¼” 20 41 2002 025: 50mm x 1½” 20 41 2002 026: 50mm x 2” 20 41 2002 030: 63mm x 2” Elbow 90° Male BSP Thread: 20 41 2085 005: 20mm x ½” 20 41 2085 006: 20mm x ¾” 20 41 2085 009: 25mm x ½” 20 41 2085 010: 25mm x ¾” 20 41 2085 011: 25mm x 1” 20 41 2085 014: 32mm x ¾” 20 41 2085 015: 32mm x 1” 20 41 2085 016: 32mm x 1¼” 20 41 2085 019: 40mm x 1” 20 41 2085 020: 40mm x 1¼” 20 41 2085 021: 40mm x 1½” 20 41 2085 022: 40mm x 2” 20 41 2085 022: 50mm x 1¼” 20 41 2085 025: 50mm x 1½” 20 41 2085 026: 50mm x 2” 20 41 2085 029: 63mm x 1½” 20 41 2085 030: 63mm x 2” Tee Male BSP Threaded: 20 41 2086 005: 20mm x ½” 20 41 2086 006: 20mm x ¾” 20 41 2086 009: 25mm x ½” 20 41 2086 010: 25mm x ¾” 20 41 2086 011: 25mm x 1” 20 41 2086 014: 32mm x ¾” 20 41 2086 015: 32mm x 1” 20 41 2086 019: 40mm x 1” 20 41 2086 020: 40mm x 1¼” 20 41 2086 021: 40mm x 1½” 20 41 2086 025: 50mm x 1½” 20 41 2086 026: 50mm x 2” 20 41 2086 030: 63mm x 2” Tee Female BSP Threaded: 20 41 2004 005: 20mm x ½” 20 41 2004 006: 20mm x ¾” 20 41 2004 009: 25mm x ½” 20 41 2004 010: 25mm x ¾” 20 41 2004 011: 25mm x 1” 20 41 2004 014: 32mm x ¾” 20 41 2004 015: 32mm x 1” 20 41 2004 019: 40mm x 1” 20 41 2004 020: 40mm x 1¼” 20 41 2004 021: 40mm x 1½” 20 41 2004 024: 50mm x 1¼” 20 41 2004 025: 50mm x 1½” 20 41 2004 026: 50mm x 2” 20 41 2004 030: 63mm x 2” Tee: 20 41 2003 020: 20mm 20 41 2003 025: 25mm 20 41 2003 032: 32mm 20 41 2003 040: 40mm 20 41 2003 050: 50mm 20 41 2003 063: 63mm Reducing Tee: 20 41 2004 104: 20 x 25 x 20mm 20 41 2004 105: 25 x 20 x 25mm 20 41 2004 110: 32 x 25 x 32mm 20 41 2004 115: 40 x 32 x 40mm 20 41 2004 118: 50 x 25 x 50mm 20 41 2004 119: 50 x 32 x 50mm 20 41 2004 120: 50 x 40 x 50mm 20 41 2004 122: 63 x 25 x 63mm 20 41 2004 123: 63 x 32 x 63mm 20 41 2004 124: 63 x 40 x 63mm 20 41 2004 125: 63 x 50 x 63mm End Cap: 20 41 2012 020: 20mm 20 41 2012 025: 25mm 20 41 2012 032: 32mm 20 41 2012 040: 40mm 20 41 2012 050: 50mm 20 41 2012 063: 63mm
• Factor: Plimat (UK) Ltd
  Company Name

  Plimat (UK) Ltd
  View All Listings by this Company

NORMA MARLIN range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 1707425
• Expiry date: 31/07/2022
• Size: 20mm to 110mm
• Marking: NORMA MARLIN, Size, KIWA & Made in Italy on compression shoulder. Date of manufacture (clock format) on body.
• Installation Requirements R001
• Model
  B075020016G 90° reducing tee 20X20X16 B075025020G 90° reducing tee 25x25x20 B075032025G 90° reducing tee 32x32x25 B075040032G 90° reducing tee 40x40x32 B075050040G 90° reducing tee 50x50x40 B075063050G 90° reducing tee 63x63x50 B075075063G 90° reducing tee 75x75x63 B075090075G 90° reducing tee 90x90x75 B075110090G 90° reducing tee 110x110x90 B075110063G 90° reducing tee 110x63x110 B080016016G 90° tee 16x16x16 B080020020G 90° tee 20x20x20 B080025025G 90° tee 25x25x25 B080032032G 90° tee 32x32x32 B080040040G 90° tee 40x40x40 B080050050G 90° tee 50x50x50 B080063063G 90° tee 63x63x63 B080075075G 90° tee 75x75x75 B080090090G 90° tee 90x90x90 B080110110G 90° tee 110x110x110 B08501600BG 90° tee with female thread 16X16X1/2" B08501600CG 90° tee with female thread 16x16x3/4" B08502000BG 90° tee with female thread 20X20X1/2" B08502000CG 90° tee with female thread 20X20X3/4" B08502500BG 90° tee with female thread 25X25X1/2" B08502500CG 90° tee with female thread 25X25X3/4" B08502500DG 90° tee with female thread 25X25X1" B08503200BG 90° tee with female thread 32X32X1/2" B08503200CG 90° tee with female thread 32X32X3/4" B08503200DG 90° tee with female thread 32X32X1" B08503200EG 90° tee with female thread 32X32X1"1/4 B08504000DG 90° tee with female thread 40X40X1" B08504000EG 90° tee with female thread 40X40X1"1/4 B08504000FG 90° tee with female thread 40X40X1"1/2 B08505000EG 90° tee with female thread 50X50X1"1/4 B08505000FG 90° tee with female thread 50x50x1"1/2 B08505000GG 90° tee with female thread 50x50x2" B08506300FG 90° tee with female thread 63x63x1"1/2 B08506300GG 90° tee with female thread 63x63x2" B08506300IG 90° tee with female thread 63x63x2"1/2 B08507500GG 90° tee with female thread 75x75x2" B08507500I G 90° tee with female thread 75x75x2"1/2 B08507500LG 90° tee with female thread 75x75x3" B08509000IG 90° tee with female thread 90x90x2"1/2 B08509000LG 90° tee with female thread 90x90x3" B08511000LG 90° tee with female thread 110x110x3" B08511000MG 90° tee with female thread 110x110x4" B09001600BG 90° tee with male thread 16x16x1/2" B09001600CG 90° tee with male thread 16x16x3/4" B09002000BG 90° tee with male thread 20x20x1/2" B09002000CG 90° tee with male thread 20x20x3/4" B09002500BG 90° tee with male thread 25x25x1/2" B09002500CG 90° tee with male thread 25x25x3/4" B09002500DG 90° tee with male thread 25x25x1" B09003200BG 90° tee with male thread 32x32x1/2" B09003200CG 90° tee with male thread 32x32x3/4" B09003200DG 90° tee with male thread 32x32x1" B09003200EG 90° tee with male thread 32x32x1"1/4 B09004000DG 90° tee with male thread 40x40x1" B09004000EG 90° tee with male thread 40x40x1"1/4 B09004000FG 90° tee with male thread 40x40x1"1/2 B09005000EG 90° tee with male thread 50x50x1"1/4 B09005000FG 90° tee with male thread 50x50x1"1/2 B09005000GG 90° tee with male thread 50x50x2" B09006300FG 90° tee with male thread 63x63x1"1/2 B09006300GG 90° tee with male thread 63x63x2" B09006300IG 90° tee with male thread 63x63x2"1/2 B09007500IG 90° tee with male thread 75x75x2"1/2 B09007500LG 90° tee with male thread 75x75x3" B09009000LG 90° tee with male thread 90x90x3" B09011000MG 90° tee with male thread 110x110x4" B09501600BG male adaptor 16x1/2" B09501600CG male adaptor 16x3/4" B09502000BG male adaptor 20x1/2" B09502000CG male adaptor 20x3/4" B09502500BG male adaptor 25x1/2" B09502500CG male adaptor 25x3/4" B09502500DG male adaptor 25x1" B09503200BG male adaptor 32x1/2" B09503200CG male adaptor 32x3/4" B09503200DG male adaptor 32x1" B09503200EG male adaptor 32x1"1/4 B09503200FG male adaptor 32x1"1/2 B09504000DG male adaptor 40x1" B09504000EG male adaptor 40x1"1/4 B09504000FG male adaptor 40x1"1/2 B09504000GG male adaptor 40x2" B09505000EG male adaptor 50x1"1/4 B09505000FG male adaptor 50x1"1/2 B09505000GG male adaptor 50x2" B09506300EG male adaptor 63x1"1/4 B09506300FG male adaptor 63x1"1/2 B09506300GG male adaptor 63x2" B09506300IG male adaptor 63x2"1/2 B09507500GG male adaptor 75x2" B09507500IG male adaptor 75x2"1/2 B09507500LG male adaptor 75x3" B09509000GG male adaptor 90x2" B09509000IG male adaptor 90x2"1/2 B09509000LG male adaptor 90x3" B09509000MG male adaptor 90x4" B09511000GG male adaptor 110x2" B09511000LG male adaptor 110x3" B09511000MG male adaptor 110x4" B10001600BG female adaptor 16x1/2" B10001600CG female adaptor 16x3/4" B10002000BG female adaptor 20x1/2" B10002000CG female adaptor 20x3/4" B10002500BG female adaptor 25x1/2" B10002500CG female adaptor 25x3/4" B10002500DG female adaptor 25x1" B10003200BG female adaptor 32x1/2" B10003200CG female adaptor 32x3/4" B10003200DG female adaptor 32x1" B10003200EG female adaptor 32x1"1/4 B10004000DG female adaptor 40x1" B10004000EG female adaptor 40x1"1/4 B10004000FG female adaptor 40x1"1/2 B10005000EG female adaptor 50x1"1/4 B10005000FG female adaptor 50x1"1/2 B10005000GG female adaptor 50x2" B10006300FG female adaptor 63x1"1/2 B10006300GG female adaptor 63x2" B10006300IG female adaptor 63x2"1/2 B10007500GG female adaptor 75x2" B10007500IG female adaptor 75x2"1/2 B10007500LG female adaptor 75x3" B10009000GG female adaptor 90x2" B10009000IG female adaptor 90x2"1/2 B10009000LG female adaptor 90x3" B10009000MG female adaptor 90x4" B10011000GG female adaptor 110x2" B10011000LG female adaptor 110x3" B10011000MG female adaptor 110x4" B105016000G coupling 16 B105020000G coupling 20 B105025000G coupling 25 B105032000G coupling 32 B105040000G coupling 40 B105050000G coupling 50 B105063000G coupling 63 B105075000G coupling 75 B105090000G coupling 90 B105110000G coupling 110 B106020000G repair coupling 20 B106025000G repair coupling 25 B106032000G repair coupling 32 B106040000G repair coupling 40 B106050000G repair coupling 50 B106063000G repair coupling 63 B106075000G repair coupling 75 B106090000G repair coupling 90 B106110000G repair coupling 110 B110020016G reducing coupling 20x16 B110025016G reducing coupling 25x16 B110025020G reducing coupling 25x20 B110032020G reducing coupling 32x20 B110032025G reducing coupling 32x25 B110040025G reducing coupling 40x25 B110040032G reducing coupling 40x32 B110050032G reducing coupling 50x32 B110050040G reducing coupling 50x40 B110063032G reducing coupling 63x32 B110063040G reducing coupling 63x40 B110063050G reducing coupling 63x50 B110075050G reducing coupling 75x50 B110075063G reducing coupling 75x63 B110090063G reducing coupling 90x63 B110090075G reducing coupling 90x75 B110110063G reducing coupling 110x63 B110110075G reducing coupling 110x75 B110110090G reducing coupling 110x90 B115016000G plug 16 B115020000G plug 20 B115025000G plug 25 B115032000G plug 32 B115040000G plug 40 B115050000G plug 50 B115063000G plug 63 B115075000G plug 75 B115090000G plug 90 B115110000G plug 110 B120016000G 90° elbow 16 B120020000G 90° elbow 20 B120025000G 90° elbow 25 B120032000G 90° elbow 32 B120040000G 90° elbow 40 B120050000G 90° elbow 50 B120063000G 90° elbow 63 B120075000G 90° elbow 75 B120090000G 90° elbow 90 B120110000G 90° elbow 110 B12501600BG 90° elbow with female thread 16x1/2" B12501600CG 90° elbow with female thread 16x3/4" B12502000BG 90° elbow with female thread 20x1/2" B12502000CG 90° elbow with female thread 20x3/4" B12502500BG 90° elbow with female thread 25x1/2" B12502500CG 90° elbow with female thread 25x3/4" B12502500DG 90° elbow with female thread 25x1" B12503200BG 90° elbow with female thread 32x1/2" B12503200CG 90° elbow with female thread 32x3/4" B12503200DG 90° elbow with female thread 32x1" B12503200EG 90° elbow with female thread 32x1"1/4 B12504000DG 90° elbow with female thread 40x1" B12504000EG 90° elbow with female thread 40x1"1/4 B12504000FG 90° elbow with female thread 40x1"1/2 B12505000EG 90° elbow with female thread 50x1"1/4 B12505000FG 90° elbow with female thread 50x1"1/2 B12505000GG 90° elbow with female thread 50x2" B12506300FG 90° elbow with female thread 63x1"1/2 B12506300GG 90° elbow with female thread 63x2" B12506300IG 90° elbow with female thread 63x2"1/2 B12507500IG 90° elbow with female thread 75x2"1/2 B12507500LG 90° elbow with female thread 75x3" B12509000LG 90° elbow with female thread 90x3" B12509000MG 90° elbow with female thread 90x4" B12511000MG 90° elbow with female thread 110x4" B13001600BG 90° elbow with male thread 16x1/2" B13001600CG 90° elbow with male thread 16x3/4" B13002000BG 90° elbow with male thread 20x1/2" B13002000CG 90° elbow with male thread 20x3/4" B13002500BG 90° elbow with male thread 25x1/2" B13002500CG 90° elbow with male thread 25x3/4" B13002500DG 90° elbow with male thread 25x1" B13003200BG 90° elbow with male thread 32x1/2" B13003200CG 90° elbow with male thread 32x3/4" B13003200DG 90° elbow with male thread 32x1" B13003200EG 90° elbow with male thread 32x1"1/4 B13004000DG 90° elbow with male thread 40x1" B13004000EG 90° elbow with male thread 40x1"1/4 B13004000FG 90° elbow with male thread 40x1"1/2 B13005000EG 90° elbow with male thread 50x1"1/4 B13005000FG 90° elbow with male thread 50x1"1/2 B13005000GG 90° elbow with male thread 50x2" B13006300FG 90° elbow with male thread 63x1"1/2 B13006300GG 90° elbow with male thread 63x2" B13006300IG 90° elbow with male thread 63x2"1/2 B13007500GG 90° elbow with male thread 75x2"1/2 B13007500LG 90° elbow with male thread 75x3" B13009000LG 90° elbow with male thread 90x3" B13009000MG 90° elbow with male thread 90x4" B13011000MG 90° elbow with male thread 110x4" B13405000GG victaulic 50x2" B13406300GG victaulic 63x2" B13411000MG victaulic 110x4" B13505000FG flange adaptor 50x1"1/2 B13505000GG flange adaptor 50x2" B13506300GG flange adaptor 63x2" B13507500IG flange adaptor 75x2"1/2 B13509000LG flange adaptor 90x3" B13509000MG flange adaptor 90x4" B13511000MG flange adaptor 110x4"
• Factor: NORMA GROUP HOLDING GMBH- EMEA
  Company Name

  NORMA GROUP HOLDING GMBH- EMEA
  View All Listings by this Company

The 3G Metric Imperial range of plastic compression fittings with polypropylene bodies, compression nut and silicone seal for use with PE80 pipe (manufactured to BS EN 12201). Maximum working pressure: Fittings when used with PE100 pipe = 16.0 bar. Fittings when used with PE80 pipe = 12.0 bar. For above and below ground and cold water use only.

• Section: 1160 Fittings for use with Tube and Pipe
• Section Subtitle: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
• WRAS Approval Number: 2206349
• Expiry date: 30/06/2027
• Size: see model
• Marking: Philmac and size on nut
• Installation Requirements R001
• Model
  3G Metric Imperial Range: Wall Plate Elbow models: 98902200 20mm(½”) x ½” 98903100 25mm(¾”) x ½” 98903200 25mm(¾”) x ¾” End Cap models: 98902900 20(½") 98903900 25(¾") 98904900 32(1") 98905900 40(1¼") 98906900 50(1½") 98907900 63(2") Elbow models: 98902800 45˚ 20(½") 98903800 45˚ 25(¾") 98904800 45˚ 32(1") 98905800 45˚ 40(1¼") 98906800 45˚ 50(1½") 98907800 45˚ 63(2") 98952200 20(½") x 20(½") 98953300 25(¾") x 25(¾") 98954400 32(1") x 32(1") 98955500 40(1¼") x 40(1¼") 98956600 50(1½") x 50(1½") 98957700 63(2") x 63(2") 98962100 20(½") x ½" FI BSP 98962200 20(½") x ¾" FI BSP 98963100 25(¾") x ½" FI BSP 98963200 25(¾") x ¾" FI BSP 98963300 25(¾") x 1" FI BSP 98964300 32(1") x 1" FI BSP 98964400 32(1") x 1¼" FI BSP 98965400 40(1¼") x 1¼" FI BSP 98965500 40(1¼") x 1½" FI BSP 98966500 50(1½") x 1½" FI BSP 98966600 50(1½") x 2" FI BSP 98967600 63(2") x 2" FI BSP 98973200 25(¾") x ¾" MI BSP 98974300 32(1") x 1" MI BSP Joiner/Coupler models: 98912200 20(½") x 20(½") 98913300 25(¾") x 25(¾") 98914400 32(1") x 32(1") 98915500 40(1¼") x 40(1¼") 98916600 50(1½") x 50(1½") 98917700 63(2") x 63(2") Reducing Joiner/Coupler models: 98913200 25(¾") x 20(½") 98914200 32(1") x 20(½") 98914300 32(1") x 25(¾") 98915300 40(1¼") x 25(¾") 98915400 40(1¼") x 32(1") 98916300 50(1½") x 25(¾") 98916400 50(1½") x 32(1") 98916500 50(1½") x 40(1¼") 98917400 63(2") x 32(1") 98917500 63(2") x 40(1¼") 98917600 63(2") x 50(1½") End Connector models: 98922100 20(½") x ½" MI BSP 98922200 20(½") x ¾" MI BSP 98922300 20(½") x 1" MI BSP 98923100 25(¾") x ½" MI BSP 98923200 25(¾") x ¾" MI BSP 98923300 25(¾") x 1" MI BSP 98924200 32(1") x ¾" MI BSP 98924300 32(1") x 1" MI BSP 98924400 32(1") x 1¼" MI BSP 98924500 32(1") x 1½" MI BSP 98925300 40(1¼") x 1" MI BSP 98925400 40(1¼") x 1¼" MI BSP 98925500 40(1¼") x 1½" MI BSP 98925600 40(1¼") x 2" MI BSP 98926500 50(1½") x 1½" MI BSP 98926600 50(1½") x 2" MI BSP 98927500 63(2") x 1½" MI BSP 98927600 63(2") x 2" MI BSP 98982100 20(½") x ½" FI BSP 98982200 20(½") x ¾" FI BSP 98982300 20(½") x 1" FI BSP 98983100 25(¾") x ½" FI BSP 98983200 25(¾") x ¾" FI BSP 98983300 25(¾") x 1" FI BSP 98984200 32(1") x ¾" FI BSP 98984300 32(1") x 1" FI BSP 98984400 32(1") x 1¼" FI BSP 98985400 40(1¼") x 1¼" FI BSP 98985500 40(1¼") x 1½" FI BSP 98986500 50(1½") x 1½" FI BSP 98986600 50(1½") x 2" FI BSP 98987500 63(2") x 1½" FI BSP 98987600 63(2") x 2" FI BSP Tee models: 98932200 20(½") x 20(½") x 20(½") 98933300 25(¾") x 25(¾") x 25(¾") 98934400 32(1") x 32(1") x 32(1") 98935500 40(1¼") x 40(1¼") x 40(1¼") 98936600 50(1½") x 50(1½") x 50(1½") 98937700 63(2") x 63(2") x 63(2") 98942100 20(½") x 20(½") x ½" FI BSP 98942200 20(½") x 20(½") x ¾" FI BSP 98943100 25(¾") x 25(¾") x ½" FI BSP 98943200 25(¾") x 25(¾") x ¾" FI BSP 98943300 25(¾") x 25(¾") x 1" FI BSP 98944100 32(1") x 32(1") x ½" FI BSP 98944200 32(1") x 32(1") x ¾" FI BSP 98944300 32(1") x 32(1") x 1" FI BSP 98944400 32(1") x 32(1") x 1½" FI BSP 98945100 40(1¼") x 40(1¼") x ½" FI BSP 98945200 40(1¼") x 40(1¼") x ¾" FI BSP 98945400 40(1¼") x 40(1¼") x 1¼" FI BSP 98945500 40(1¼") x 40(1¼") x 1½" FI BSP 98946100 50(1½") x 50(1½") x ½" FI BSP 98946200 50(1½") x 50(1½") x ¾" FI BSP 98946500 50(1½") x 50(1½") x 1½" FI BSP 98946600 50(1½") x 50(1½") x 2" FI BSP 98947600 63(2") x 63(2") x 2" FI BSP 98993100 25(¾") x 25(¾") x ½" MI BSP 98993200 25(¾") x 25(¾") x ¾" MI BSP Reducing Tee models: 98933200 25(¾") x 25(¾") x 20(½") 98933400 25(¾") x 25(¾") x 32(1") 98934300 32(1") x 32(1") x 25(¾") 98935300 40(1¼") x 40(1¼") x 25(¾") 98935400 40(1¼") x 40(1¼") x 32(1") 98936300 50(1½") x 50(1½") x 25(¾") 98936400 50(1½") x 50(1½") x 32(1") 98936500 50(1½") x 50(1½") x 40(1¼") 98937300 63(2") x 63(2") x 25(¾") 98937400 63(2") x 63(2") x 32(1") 98937600 63(2") x 63(2") x 50(1½") Reducing Elbow models: 98952300 25(¾") x20(½")
• Manufacturer: Philmac Pty Ltd
  Company Name

  Philmac Pty Ltd
  View All Listings by this Company