Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309366

Size:

See model.

Marking:

Lawton tubes logo, EN1254 and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

EFBTC0151/2: 15MM X 1/2" Bent Tap Connector EF, EFBTC0223/4: 22MM X 3/4" Bent Tap Connector EF, EFCOFI0151/2: 15MM X 1/2" Female Adaptor Brass EF, EFCOFI0153/4: 15MM X 3/4" Female Adaptor Brass EF, EFCOFI0221/2: 22MM X 1/2" Female Adaptor Brass EF, EFCOFI0223/4: 22MM X 3/4" Female Adaptor Brass EF, EFCOFI0281: 28MM X 1" Female Adaptor Brass EF, EFCOFI0283/4: 28MM X 3/4" Female Adaptor Brass EF, EFCOFI03511/4: 35MM X 1.1/4" Female Adaptor Brass EF, EFCOFI04211/2: 42MM X 1.1/2" Female Adaptor Brass EF, EFCOFI0542: 54MM X 2" Female Adaptor Brass EF, EFCOFI06721/2: 66.7MM X 2.1/2" Female Adaptor Brass EF, EFCOFI0763: 76MM X 3" Female Adaptor Brass EF, EFCOFI1084: 108MM X 4" Female Adaptor Brass EF, EFCOMI0151/2: 15MM X 1/2" Male Adaptor Brass EF, EFCOMI0223/4: 22MM X 3/4" Male Adaptor Brass EF, EFCOMI0281: 28MM X 1" Male Adaptor Brass EF, EFCOMI03511/4: 35MM X 1.1/4" Male Adaptor Brass EF, EFCOMI04211/2: 42MM X 1.1/2" Male Adaptor Brass EF, EFCOMI0542: 54MM X 2" Male Adaptor Brass EF, EFCOMI06721/2: 66.7MM X 2.1/2" Male Adaptor Brass EF, EFCOMI0763: 76MM X 3" Male Adaptor Brass EF, EFCOMI1084: 108MM X 4" Male Adaptor Brass EF, EFCP008: 8MM Coupler EF, EFCP010: 10MM Coupler EF, EFCP015: 15MM Coupler EF, EFCP022: 22MM Coupler EF, EFCP028: 28MM Coupler EF, EFCP035: 35MM Coupler EF, EFCP042: 42MM Coupler EF, EFCP054: 54MM Coupler EF, EFCP067: 66.7MM Coupler EF, EFCP076: 76.1MM Coupler EF, EFCP108: 108MM Coupler EF, EFCP133: 133MM Coupler EF, EFCP159: 159MM Coupler EF, EFCP219: 219MM Coupler EF, EFCP0108: 10MM X 8MM Reducer Coupler EF, EFCP01510: 15MM X 10MM Reducer Coupler EF, EFCP01512: 15MM X 12MM Reducer Coupler EF, EFCP0158: 15MM X 8MM Reducer Coupler EF, EFCP02215: 22MM X 15MM Reducer Coupler EF, EFCP02815: 28MM X 15MM Reducer Coupler EF, EFCP02822: 28MM X 22MM Reducer Coupler EF, EFCP03528: 35MM X 28MM Reducer Coupler EF, EFCP04235: 42MM X 35MM Reducer Coupler EF, EFCP05422: 54MM X 22MM Reducer Coupler EF, EFCP05442: 54MM X 42MM Reducer Coupler EF, EFCP06728: 66.7MM X 28MM Reducer Coupler EF, EFCP06754: 66.7MM X 54MM Reducer Coupler EF, EFCP07635: 76.1MM X 35MM Reducer Coupler EF, EFCP07642: 76.1MM X 42MM Reducer Coupler EF, EFCP07654: 76.1MM X 54MM Reducer Coupler EF, EFCP07667: 76.1MM X 66.7MM Reducer Coupler EF, EFCP10854: 108MM X 54MM Reducer Coupler EF, EFCP10867: 108MM X 66.7MM Reducer Coupler EF, EFCP10876: 108MM X 76.1MM Reducer Coupler EF, EFCP0151/2: 15MM X 1/2" Adaptor Coupler (Metric/Imperial) EF, EFCP0223/4: 22MM X 3/4" Adaptor Coupler (Metric/Imperial) EF, EFCP0281: 28MM X 1" Adaptor Coupler (Metric/Imperial) EF, EFCP03511/4: 35MM X 1.1/4" Adaptor Coupler (Metric/Imperial) EF, EFCU0221: 22MM X 1" Straight Cylinder Union EF, EFCU0281: 28MM X 1" Straight Cylinder Union EF, EFEC008: 8MM End Cap EF, EFEC010: 10MM End Cap EF, EFEC012: 12MM End Cap EF, EFEC015: 15MM End Cap EF, EFEC022: 22MM End Cap EF, EFEC028: 28MM End Cap EF, EFEC035: 35MM End Cap EF, EFEC042: 42MM End Cap EF, EFEC054: 54MM End Cap EF, EFEC067: 66.7MM End Cap EF, EFEC076: 76.1MM End Cap EF, EFEC108: 108MM End Cap EF, EFEC133: 133MM End Cap EF, EFEC159: 159MM End Cap EF, EFEL008: 8MM 90° Elbow EF, EFEL010: 10MM 90° Elbow EF, EFEL015: 15MM 90° Elbow EF, EFEL022: 22MM 90° Elbow EF, EFEL028: 28MM 90° Elbow EF, EFEL035: 35MM 90° Elbow EF, EFEL042: 42MM 90° Elbow EF, EFEL054: 54MM 90° Elbow EF, EFEL067: 66.7MM 90° Elbow EF, EFEL076: 76.1MM 90° Elbow EF, EFEL108: 108MM 90° Elbow EF, EFEL133: 133MM 90° Elbow EF, EFEL159: 159MM 90° Elbow EF, EFEL219: 219MM 90° Elbow EF, EFELFI0151/2: 15MM X 1/2" Female Elbow Brass EF, EFELFI0221/2: 22MM X 1/2" Female Elbow Brass EF, EFELFI0223/4: 22MM X 3/4" Female Elbow Brass EF, EFELFI0281: 28MM X 1" Female Elbow Brass EF, EFELLR015: 15MM Long Radius 90° Elbow EF, EFELLR022: 22MM Long Radius 90° Elbow EF, EFELLR028: 28MM Long Radius 90° Elbow EF, EFELLR067: 66.7MM Long Radius 90° Elbow EF, EFELLR076: 76.1MM Long Radius 90° Elbow EF, EFELLR108: 108MM Long Radius 90° Elbow EF, EFELMI0151/2: 15MM X 1/2" Male Elbow Brass EF, EFELMI0223/4: 22MM X 3/4" Male Elbow Brass EF, EFELMI0281: 28MM X 1" Male Elbow Brass EF, EFELS015: 15MM 90° Street Elbow EF, EFELS022: 22MM 90° Street Elbow EF, EFELS028: 28MM 90° Street Elbow EF, EFELS035: 35MM 90° Street Elbow EF, EFELS042: 42M 90° Street Elbow EF, EFELS054: 54MM 90° Street Elbow EF, EFELSLT015: 15MM 90° Long Tail Street Elbow EF, EFELSLT022: 22MM 90° Long Tail Street Elbow EF, EFELWC0151/2: 15MM X 1/2" Gas Connector Elbow Brass EF, EFELWL0151/2: 15MM X 1/2" Wallplate Elbow Brass EF, EFELWL0223/4: 22MM X 3/4" Wallplate Elbow Brass EF, EFEL00845: 8MM X 45° Elbow EF, EFEL01045: 10MM X 45° Elbow EF, EFEL01545: 15MM X 45° Elbow EF, EFEL02245: 22MM X 45° Elbow EF, EFEL02845: 28MM X 45° Elbow EF, EFEL03545: 35MM X 45° Elbow EF, EFEL04245: 42MM X 45° Elbow EF, EFEL05445: 54MM X 45° Elbow EF, EFEL06745: 66.7MM X 45° Elbow EF, EFEL07645: 76.1MM X 45° Elbow EF, EFEL10845: 108MM X 45° Elbow EF, EFEL13345: 133MM X 45° Elbow EF, EFEL15945: 159MM X 45° Elbow EF, EFEL21945: 219MM X 45° Elbow EF, EFELS01545: 15MM X 45° Street Elbow EF, EFELS02245: 22MM X 45° Street Elbow EF, EFELS02845: 28MM X 45° Street Elbow EF, EFELS03545: 35MM X 45° Street Elbow EF, EFELS04245: 42MM X 45° Street Elbow EF, EFELS05445: 54MM X 45° Street Elbow EF, EFELS06745: 66.7MM X 45° Street Elbow EF, EFELS07645: 76.1MM X 45° Street Elbow EF, EFFCO015: 15MM Full Crossover EF, EFFCO022: 22MM Full Crossover EF, EFFCO028: 28MM Full Crossover EF, EFPCO015: 15MM Part Crossover EF, EFPCO022: 22MM Part Crossover EF, EFRED0108: 10MM X 8MM Fitting Reducer EF, EFRED01510: 15MM X 10MM Fitting Reducer EF, EFRED0158: 15MM X 8MM Fitting Reducer EF, EFRED02215: 22MM X 15MM Fitting Reducer EF, EFRED02815: 28MM X 15MM Fitting Reducer EF, EFRED02822: 28MM X 22MM Fitting Reducer EF, EFRED03515: 35MM X 15MM Fitting Reducer EF, EFRED03522: 35MM X 22MM Fitting Reducer EF, EFRED03528: 35MM X 28MM Fitting Reducer EF, EFRED04215: 42MM X 15MM Fitting Reducer EF, EFRED04222: 42MM X 22MM Fitting Reducer EF, EFRED04228: 42MM X 28MM Fitting Reducer EF, EFRED04235: 42MM X 35MM Fitting Reducer EF, EFRED05415: 54MM X 15MM Fitting Reducer EF, EFRED05422: 54MM X 22MM Fitting Reducer EF, EFRED05428: 54MM X 28MM Fitting Reducer EF, EFRED05435: 54MM X 35MM Fitting Reducer EF, EFRED05442: 54MM X 42MM Fitting Reducer EF, EFRED06728: 66.7MM X 28MM Fitting Reducer EF, EFRED06735: 66.7MM X 35MM Fitting Reducer EF, EFRED06742: 66.7MM X 42MM Fitting Reducer EF, EFRED06754: 66.7MM X 54MM Fitting Reducer EF, EFRED07635: 76.1MM X 35MM Fitting Reducer EF, EFRED07642: 76.1MM X 42MM Fitting Reducer EF, EFRED07654: 76.1MM X 54MM Fitting Reducer EF, EFRED07667: 76.1MM X 66.7MM Fitting Reducer EF, EFRED10842: 108MM X 42MM Fitting Reducer EF, EFRED10854: 108MM X 54MM Fitting Reducer EF, EFRED10867: 108MM X 66.7MM Fitting Reducer EF, EFRED10876: 108MM X 76.1MM Fitting Reducer EF, EFRED133108: 133MM X 108MM Fitting Reducer EF, EFRED13367: 133MM X 66.7MM Fitting Reducer EF, EFRED13376: 133 X 76.1MM Fitting Reducer EF, EFRED159108: 159MM X 108MM Fitting Reducer EF, EFRED159133: 159MM X 133MM Fitting Reducer EF, EFRED15976: 159MM X 76.1MM Fitting Reducer EF, EFRED219159: 219MM X 159MM Fitting Reducer EF, EFREDLT01510: 15MM X 10MM Long Tail Fitting Reducer EF, EFREDLT0158: 15MM X 8MM Long Tail Fitting Reducer EF, EFSC015: 15MM Slip Coupler EF, EFSC022: 22MM Slip Coupler EF, EFSC028: 28MM Slip Coupler EF, EFSC035: 35MM Slip Coupler EF, EFSC042: 42MM Slip Coupler EF, EFSC054: 54MM Slip Coupler EF, EFSTC0151/2: 15MM X 1/2" Straight Tap Connector EF, EFSTC0153/4: 15MM X 3/4" Straight Tap Connector EF, EFSTC0223/4: 22MM X 3/4" Straight Tap Connector EF, EFTE008: 8MM Equal Tee EF, EFTE010: 10MM Equal Tee EF, EFTE015: 15MM Equal Tee EF, EFTE022: 22MM Equal Tee EF, EFTE028: 28MM Equal Tee EF, EFTE035: 35MM Equal Tee EF, EFTE042: 42MM Equal Tee EF, EFTE054: 54MM Equal Tee EF, EFTE067: 66.7MM Equal Tee EF, EFTE076: 76.1MM Equal Tee EF, EFTE108: 108MM Equal Tee EF, EFTE133: 133MM Equal Tee EF, EFTE159: 159MM Equal Tee EF, EFTE219: 219MM Equal Tee EF, EFTE0151508: 15MM X 15MM X 8MM Reducer Tee EF, EFTE0151510: 15MM X 15MM X 10MM Reducer Tee EF, EFTE0151522: 15MM X 15MM X 22MM Reducer Tee EF, EFTE0221515: 22MM X 15MM X 15MM Reducer Tee EF, EFTE0221522: 22MM X 15MM X 22MM Reducer Tee EF, EFTE0222215: 22MM X 22MM X 15MM Reducer Tee EF, EFTE0222228: 22MM X 22MM X 28MM Reducer Tee EF, EFTE0281515: 28MM X 15MM X 15MM Reducer Tee EF, EFTE0281528: 28MM X 15MM X 28MM Reducer Tee EF, EFTE0282215: 28MM X 22MM X 15MM Reducer Tee EF, EFTE0282222: 28MM X 22MM X 22MM Reducer Tee EF, EFTE0282228: 28MM X 22MM X 28MM Reducer Tee EF, EFTE0282815: 28MM X 28MM X 15MM Reducer Tee EF, EFTE0282822: 28MM X 28MM X 22MM Reducer Tee EF, EFTE0282835: 28MM X 28MM X 35MM Reducer Tee EF, EFTE0351535: 35MM X 15MM X 35MM Reducer Tee EF, EFTE0352222: 35MM X 22MM X 22MM Reducer Tee EF, EFTE0352235: 35MM X 22MM X 35MM Reducer Tee EF, EFTE0352822: 35MM X 28MM X 22MM Reducer Tee EF, EFTE0352828: 35MM X 28MM X 28MM Reducer Tee EF, EFTE0352835: 35MM X 28MM X 35MM Reducer Tee EF, EFTE0353515: 35MM X 35MM X 15MM Reducer Tee EF, EFTE0353522: 35MM X 35MM X 22MM Reducer Tee EF, EFTE0353528: 35MM X 35MM X 28MM Reducer Tee EF, EFTE0421542: 42MM X 15MM X 42MM Reducer Tee EF, EFTE0422242: 42MM X 22MM X 42MM Reducer Tee EF, EFTE0422828: 42MM X 28MM X 28MM Reducer Tee EF, EFTE0422842: 42MM X 28MM X 42MM Reducer Tee EF, EFTE0423528: 42MM X 35MM X 28MM Reducer Tee EF, EFTE0423535: 42MM X 35MM X 35MM Reducer Tee EF, EFTE0423542: 42MM X 35MM X 42MM Reducer Tee EF, EFTE0424215: 42MM X 42MM X 15MM Reducer Tee EF, EFTE0424222: 42MM X 42MM X 22MM Reducer Tee EF, EFTE0424228: 42MM X 42MM X 28MM Reducer Tee EF, EFTE0424235: 42MM X 42MM X 35MM Reducer Tee EF, EFTE0544242: 54MM X 42MM X 42MM Reducer Tee EF, EFTE0544254: 54MM X 42MM X 54MM Reducer Tee EF, EFTE0545415: 54MM X 54MM X 15MM Reducer Tee EF, EFTE0545422: 54MM X 54MM X 22MM Reducer Tee EF, EFTE0545428: 54MM X 54MM X 28MM Reducer Tee EF, EFTE0545435: 54MM X 54MM X 35MM Reducer Tee EF, EFTE0545442: 54MM X 54MM X 42MM Reducer Tee EF, EFTE0676728: 66.7MM X 66.7MM X 28MM Reducer Tee EF, EFTE0676735: 66.7MM X 66.7MM X 35MM Reducer Tee EF, EFTE0676742: 66.7MM X 66.7MM X 42MM Reducer Tee EF, EFTE0676754: 66.7MM X 66.7MM X 54MM Reducer Tee EF, EFTE0767628: 76.1MM X 76.1MM X 28MM Reducer Tee EF, EFTE0767635: 76.1MM X 76.1MM X 35MM Reducer Tee EF, EFTE0767642: 76.1MM X 76.1MM X 42MM Reducer Tee EF, EFTE0767654: 76.1MM X 76.1MM X 54MM Reducer Tee EF, EFTE0767667: 76.1MM X 76.1MM X 66.7MM Reducer Tee EF, EFTE10810835: 108MM X 108MM X 35MM Reducer Tee EF, EFTE10810842: 108MM X 108MM X 42MM Reducer Tee EF, EFTE10810854: 108MM X 108MM X 54MM Reducer Tee EF, EFTE10810867: 108MM X 108MM X 66.7MM Reducer Tee EF, EFTE10810876: 108MM X 108MM X 76.1MM Reducer Tee EF, EFTE159159108: 159MM X 159MM X 108MM Reducer Tee EF, EFTE159159133: 159MM X 159MM X 133MM Reducer Tee EF, EFTE15915976: 159MM X 159MM X 76.1MM Reducer Tee EF, EFTEFI015151/2: 15MM X 15MM X 1/2" Reducer Tee Brass EF, EFTEFI022221/2: 22MM X 22MM X 1/2" Reducer Tee Brass EF, EFTEFI022223/4: 22MM X 22MM X 3/4" Reducer Tee Brass EF, EFTEFI028281: 28MM X 28MM X 1" Reducer Tee Brass EF, EFTEFI028281/2: 28MM X 28MM X 1/2" Reducer Tee Brass EF, EFUNF0151/2: 15MM X 1/2" Female Union Adaptor Brass EF, EFUNF0223/4: 22MM X 3/4" Female Union Adaptor Brass EF, EFUNF0281: 28MM X 1" Female Union Adaptor Brass EF, EFUNF03511/4: 35MM X 1.1/4" Female Union Adaptor Brass EF, EFUNF04211/2: 42MM X 1.1/2" Female Union Adaptor Brass EF, EFUNF0542: 54MM X 2" Female Union Adaptor Brass EF, EFUNM0151/2: 15MM X 1/2" Male Union Adaptor Brass EF, EFUNM0223/4: 22MM X 3/4" Male Union Adaptor Brass EF, EFUNM0281: 28MM X 1" Male Union Adaptor Brass EF, EFUNM03511/4: 35MM X 1.1/4" Male Union Adaptor Brass EF, EFUNM04211/2: 42MM X 1.1/2" Male Union Adaptor Brass EF, EFUNM0542: 54MM X 2" Male Union Adaptor Brass EF, EFUNM06721/2: 67MM X 2.1/2" Male Union Adaptor Brass EF, EFUNM0763: 76MM X 3" Male Union Adaptor Brass EF.

Approval Holder:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Coventry

Postcode

CV4 9AB

Country

United Kingdom

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

mlis@lawtontubes.co.uk

View All Listings by this Company

Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309367

Size:

See model.

Marking:

Lawton tubes logo, EN1254 and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

JET BRAZING REDUCER 67X28 JET BRAZING REDUCER 67X35 JET BRAZING REDUCER 67X42 JET BRAZING REDUCER 67X54 JET BRAZING REDUCER 76X35 JET BRAZING REDUCER 76X42 JET BRAZING REDUCER 76X54 JET BRAZING REDUCER 76X67 JET BRAZING REDUCER 108X42 JET BRAZING REDUCER 108X54 JET BRAZING REDUCER 108X67 JET BRAZING REDUCER 108X76 JET BRAZING REDUCER 133X42 JET BRAZING REDUCER 133X54 JET BRAZING REDUCER 133X67 JET BRAZING REDUCER 133X76 JET BRAZING REDUCER 133X108 JET BRAZING REDUCER 159X54 JET BRAZING REDUCER 159X67 JET BRAZING REDUCER 159X76 JET BRAZING REDUCER 159X108 JET BRAZING REDUCER 159X133 JET BRAZING REDUCER 219X159 JET BRAZING STRAIGHT COUPLING 67 JET BRAZING STRAIGHT COUPLING 76 JET BRAZING STRAIGHT COUPLING 108 JET BRAZING STRAIGHT COUPLING 133 JET BRAZING STRAIGHT COUPLING 159 JET BRAZING STRAIGHT COUPLING      219 JET BRAZING REDUCED TEE 67X67X28 JET BRAZING REDUCED TEE 67X67X35 JET BRAZING REDUCEDTEE 67X67X42 JET BRAZING REDUCED TEE 67X67X54 JET BRAZING REDUCED TEE 76X76X28 JET BRAZING REDUCED TEE 76X76X35 JET BRAZING REDUCED TEE 76X76X42 JET BRAZING REDUCED TEE 76X76X54 JET BRAZING REDUCED TEE 108X108X35 JET BRAZING REDUCED TEE 108X108X54 JET BRAZING REDUCED TEE 108X108X76 JET BRAZING REDUCED TEE 133X133X54 JET BRAZING REDUCED TEE 133X133X108 JET BRAZING REDUCED TEE 159X159X54 JET BRAZING REDUCED TEE 159X159X133 JET BRAZING EQUAL TEE 67 JET BRAZING EQUAL TEE 76 JET BRAZING EQUAL TEE 108 JET BRAZING EQUAL TEE 133 JET BRAZING EQUAL TEE 159 JET BRAZING EQUAL TEE 219 JET BRAZING STOP END 67 JET BRAZING STOP END 76 JET BRAZING STOP END 108 JET BRAZING STOP END 133 JET BRAZING STOP END 159 JET BRAZING 90D ELBOW 67 JET BRAZING 90D ELBOW 76 JET BRAZING 90D ELBOW 108 JET BRAZING 90D ELBOW 133 JET BRAZING 90D ELBOW 159 JET BRAZING 90D ELBOW 219 JET BRAZING 45D ELBOW 67 JET BRAZING 45D ELBOW 76 JET BRAZING 45D ELBOW 108 JET BRAZING 45D ELBOW 133 JET BRAZING 45D ELBOW 159 JET BRAZING 45D ELBOW 219 JET BRAZING 45D STREET ELBOW 67 JET BRAZING 45D STREET ELBOW 76 JET BRAZING FEMALE IRON ADAPTOR 67X21.1/2 JET BRAZING FEMALE IRON ADAPTOR 76X3 JET BRAZING FEMALE IRON ADAPTOR 108X4 JET BRAZING MALE IRON ADAPTOR 67X2.1/2 JET BRAZING MALE IRON ADAPTOR 76X3 JET BRAZING MALE IRON ADAPTOR 108X4

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: EV30, EV45, 30VR & 45VR models - 32.0 bar, EV65, EV95, 65VR & 95VR models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305073

Size:

DN65 - DN100

Marking:

Franklin electric S.r.l logo, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

EV and VR ranges. Code example (EV range): EV 30 /13 A B C D E F G H J K L M N. Where: EV = Pump model EV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). EV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); EV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); EV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); EV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz). Code example (VR range): 30 VR0700 A B C X-XXXX. Where: 30 = Rated flow [m³/h] (varies: 30-95). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "G" - (cast iron/304SS); "N" - (AISI316/EN 1.4401). B = Flange type: "F" - round. C = Mechanical Seal: “A” - (BQBE, BE1); “B” - (BQQE, BE2). X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. 30VR: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); 45VR: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); 65VR: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A (60Hz); 95VR: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Manufacturer:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

CMBE range of horizontal multistage centrifugal booster pumps with stainless steel bodies and impellers and EPDM ‘O’-rings. All models include an expansion vessel, non-return valve, pressure gauge and sensor on the outlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2306903

Size:

CMBE1 & CMBE3: 1” BSPT (F) Inlet/Outlet. CMBE5: 1 ¼” BSPT (F) Inlet/1” BSPT (F) Outlet. CMBE10: 1 ½” BSPT (F) Inlet/Outlet.

Marking:

Grundfos and Grundfos logo, type, Model, P/N no. and technical info on adhesive label on end of motor housing.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

CMBE-XX1-XX2-I-U-C-X3-D-X4 Where: CMBE = Booster type - booster with integrated frequency inverter. XX1 = Rated flow rate [m³/h] @ 50Hz - 1, 3, 5 or 10. XX2 = Maximum head [m] - 44, 54, 62 or 93 (CMBE 1 = 44, CMBE 3 = 62 or 93, CMBE 5 = 62, CMBE 10 = 54). I = Materials in contact with liquid - Sleeve, Pump shaft, Impellers/chamber, 5-way valve: EN1.4301/AISI 304, Pressure manager: PP 30GF, Pressure tank: EPDM/steel/PP/Butyl. U = Supply Voltage [V] - 1 x 200-240 V, 50/60 Hz. C = Motor - High-efficiency motor with frequency converter (IP55). X3 = Main cable and plug options - A/B/C/D/E/H/G/J/O. D = Controller - Integrated frequency converter. X4 = Thread - A: Rp 1, B: Rp 1 1/4 or C: Rp 1 1/2.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: NKV32 & NKV45 models - 32.0 bar, NKV65 & NKV95 models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305076

Size:

DN65 - DN100

Marking:

DAB Pumps Spa, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

Code example (EV range): NVK 30 /13 A B C D E F G H J K L M N. Where: NVK = Pump model 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). NKV 32: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); NKV 45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); NKV 65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); NKV 95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: FGV30, FGV45 - 32.0 bar, FGV65, FGV95 - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305078

Size:

DN65 - DN100

Marking:

Fourgroup, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

FGV range. Code example (FGV range): FGV 30 /13 A B C D E F G H J K L M N. Where: FGV = Pump model FGV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). FGV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); FGV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); FGV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); FGV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:

FOURGROUP

Company Name

FOURGROUP

Address

via E. Fermi 8, 35020 Polverara (PD)

Country

Italy

View All Listings by this Company

Range of vertical multistage pumps with cast iron bodies with a black electrodeposition coating, stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: MVX 30 & MVX 45- 32.0 bar, MVX 65 & MVX95 VR - 25.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305084

Size:

DN65 - DN100

Marking:

Sea-Land SRL, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

Code example - MVX range: MVX 30 /13 A B C D E F G H J K L M N. Where: MVX = Pump model 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). MVX30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); MVX45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); MVX65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); MVX95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:

SEA-LAND SRL

Company Name

SEA-LAND SRL

Address

Via. E. Mattei 25 Torreglia (PD)

Postcode

35038

Country

Italy

Phone

+39 049 5212944

General Email

info@sea-land.it

View All Listings by this Company

Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310916

Size:

CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.

Marking:

Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2028

Model:

Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of overhead shower outlets with brass or stainless-steel bodies (various finishes - see model), with NBR ‘O’-rings. The inlet incorporates a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306075

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

Elisa on Connector

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

706344 Chrome (16” circle stainless steel shower head), 706345 Matt Black (16” circle stainless steel shower head), 706346 Brushed Brass (16” circle stainless steel shower head), 706347 Chrome (16” square stainless steel shower head), 706348 Matt Black (16” square stainless steel shower head), 706349 Brushed Black (16” square stainless steel shower head),

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of shower heads with a chromium plated brass bodies, with stainless-steel strainer plastic flow regulator on the inlet. Models P42802 & P45300 have plastic bodies.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2307002

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Solex on back of shower body

Installation Requirements:

R001 R040

Expiry date:

31/07/2028

Model:

P43300 P43301 (39174W – CP) P47000 P42701 P42702 P42801 P42802 P45300 P44900 P40700 P40600

Product Images

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Range of wall and ceiling mounted shower arms with (brass bodies - various styles and finishes). Maximum operating temperature 60°C. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306330

Size:

½” BSP (M)

Marking:

THG on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

82/W, 82V/W (ceiling mounted), 84/W, 84BC/W, 84C/W, 84L/W, 85/W Style: A04 Broadway à manettes, A1J Amboise Malachite, A1K Amboise Lapis Lazuli, A1L Amboise Jaspe rouge, A1M Amboise Onyx noir, A1S Cheverny Malachite, A1T Cheverny Lapis Lazuli, A1U Cheverny Jaspe rouge, A1V Sully Malachite, A1W Sully Lapis Lazuli, A1X Sully Jaspe rouge, A2A Métropolis cristal clair, A2B Métropolis cristal clair à manettes, A2C Océania, A2E Venice, A2F Naïade, A2G Ange, A2H Panthère cristal clair, A2I Perle, A2J Papillon, A2K Panthère cristal noir, A2L Métropolis cristal noir, A2M Métropolis cristal noir à manettes, A2N Mossi cristal clair, A2R Masque de Femme lunaire, A2S Masque de Femme solaire, A2T Masque de Femme métal grave, A2U Masque de Femme, métal lisse, A33 Bambou cristal noir, A34 Bambou cristal Ambre, A35 Bambou cristal clair, A38 Niagara, A3T Amboise Marbre à définir, A3V Cheverny Marbre à définir, A41 Dahlia, A42 Pomme cristal clair satiné, A44 Ellipse, A46 Pomme cristal lustré, A4J Hirondelles, A4K Hirondelles tamponnées platine, A4L Hirondelles tamponnées, A52 Broadway, A54 Art Déco, A55 Art Déco à manettes, A56 Art Déco Cristal, A57 Tradition, A58 Tradition à manettes, A59 Tradition Cristal, A60 Marina Onyx noir, A61 Marina metal, A6A Profil metal, A6B Profil métal à manettes, A6G Profil Lalique cristal clair, A6H Profil Lalique cristal clair à manettes, A6N Profil Onyx noir, A6P Profil Onyx noir à manettes, A7A Ithaque décor, A7B Ithaque décor Platine, A7D Capucine mauve décor, A7E Capucine vert décor Platine, A7F Marquise noir décor, A7G Marquise blanc décor Platine, A8M Vogue Malachite, A8N Vogue Jaspe rouge, A8P Vogue Onyx noir, A8R Vogue Oeil de tigre, A8S Vogue Lapis Lazuli, A9B Jaipur cristal satiné, A9C Jaipur Onyx noir, A9F Jaipur metal. E53 Najem. G04 Pure, G08 Pompadour, G13 Rochambeau, G14 Versailles, G1T Beluga, G1U Beluga à manettes, G24 Amour de Trianon, G25 1900, G28 1900 à manettes, G29 Charleston, G2H Le 9 Howlite, G2I Le 9 Nero Marquina, G2J Faubourg porcelaine blanche à manettes, G2K Faubourg porcelaine blanche, G2L Faubourg porcelaine noire, G2M Faubourg porcelaine noire à manettes, G2N Froufrou, G2P Froufrou à manettes, G2R Frivole, G2S Frivole à manettes, G2T Faubourg metal, G2U Faubourg métal à manettes, G31 Cygne, G3M 1900 à manettes métal lisse, G3N Charleston à manettes métal lisse, G3R Montaigne marbre Grand Antique, G3S Montaigne marbre Grand Antique à manettes, G3T Montaigne marbre Leonardo Grey, G3U Montaigne marbre Leonardo Grey à manettes, G3V Montaigne marbre blanc Vénus, G3W Montaigne marbre blanc Vénus à manettes, G47 Vendôme, G4P Collection "O", G4R Hamptons, G4S Hamptons à manettes, G58 Spirit à manettes, G5A Nano, G5B Nano à manettes, G5D Anoa, G5E Soho, G69 Spirit, G6A Métamorphose, G6B Métamorphose à manettes, G6C M tamorphose carbone, G6D Métamorphose céramique noire, G6E Métamorphose céramique blanche, G6F Métamorphose à manettes coloris spécifique, G75 Charleston à manettes, G79 Cubica, G7A Beaubourg, G7B Beaubourg à manettes, G7C Saint-Germain, G7D Saint-Germain à manettes, G7E Dean, G7F Bondi, G7G Bondi à manettes, G7H Club Saint-Germain, G7J Club Saint-Germain à manettes, G8A Les Ondes, G8B Les Ondes à manettes, G9A SYSTEM métal lisse, G9B SYSTEM métal lisse à manettes, G9C SYSTEM métal diamant, G9D SYSTEM métal diamant à manettes, G9E SYSTEM métal quadrille, G9F SYSTEM métal quadrillé à manettes, G9G SYSTEM Howlite, G9H SYSTEM Howlite à manettes, G9J SYSTEM cristal, G9K SYSTEM cristal à manettes, G9L SYSTEM croisillon bague à définir, G9M SYSTEM manette bague à définir. J17 Beverley. O01 LUXURY COLLECTION, O02 MASTER COLLECTION. U1A Mandarine metal, U1D Mandarine cristal clair, U1E Mandarine cristal clair satiné, U1K Mandarine Cristallia Diamant, U1S Sully Onyx blanc, U1T Sully Onyx noir, U1V Cheverny Onyx noir, U2A Le 11, U2B Le 11 à manettes, U2D INFINI porcelaine blanche, U2E INFINI porcelaine blanche décor platine, U2F INFINI porcelaine blanche décor, U2L Nihal porcelaine bleue, U2M Nihal métal lisse, U2N Nihal porcelaine ivoire, U2P Nihal porcelaine noire, U2R Nihal porcelaine verte, U3J Estrela, U3K Estrela à manettes, U3L Estrela - insert metal, U4A Diplomate bagues lisses, U4B Diplomate bagues annelées, U4C Diplomate bagues torsadées, U4D Diplomate Royale, U4E Duomo, U4F Duomo cristal, U5A Flore, U5B Island, U5C Paradise, U5D Sun Dragon, U5E Ginkgo, U5F Vegetal, U5G Moon Dragon, U5H Jade Dragon, U5J Rose, U6A Pétale de Cristal clair, U6B Pétale de Cristal bleu, U6C Pétale de Cristal rouge, U6D Pétale de Cristal noir, U6E Pétale de Cristal clair liseré doré, U6F Beyond Crystal - cristal clair, U6G Beyond Crystal - cristal aqua, U6H Beyond Crystal - cristal rouge, U6J Beyond Crystal - cristal couleur champagne, U6K Beyond Crystal - cristal bleu, U7A Trocadéro Malachite, U7B Trocadéro Lapis Lazuli, U7C Trocadéro Jaspe Rouge, U7D Trocadéro Onyx noir, U7E Trocadéro Oeil de Tigre, U7G Icon-X, U7H Icon-X à manettes, U7J Icon-X - insert metal, U7K Icon-X à manettes - insert metal, U7L Icon-X – Titane, U7M Icon-X à manettes – Titane, U7S Icon-X – Carbone, U7T Icon-X à manettes- Carbone, U8A Wedding, U8B Monte Carlo porcelaine, U8C Monte Carlo porcelaine or blanc, U8D Corvair, U8E Corvair à manettes, U8F Corvair Howlite, U8G Corvair Howlite à manettes, U8H Corvair Portoro, U8J Corvair à manettes Portoro, U8K Corvair Fior di Bosco, U8L Corvair à manettes Fior di Bosco, U93 Malmaison metal, U94 Malmaison cristal, U95 Malmaison Portoro, U97 Malmaison Howlite, U9A West Coast croisillon metal, U9B West Coast manette metal, U9C West Coast croisillon guilloché lin, U9D West Coast manette guilloché lin, U9E West Coast croisillon onyx noir, U9F West Coast manette onyx noir, U9G West Coast croisillon onyx blanc, U9H West Coast manette onyx blanc, U9I West Coast manette - insert à définir, U9J West Coast croisillons - insert à définir, U9K Grand Central croisillon metal, U9L Grand Central manette metal, U9M Grand Central croisillon onyx noir, U9N Grand Central manette onyx noir, U9P Grand Central manette - insert à définir, U9Q Grand Central croisillon - insert à définir, U9R Grand Central croisillon onyx blanc, U9S Grand Central manette onyx blanc.

New Styles added November 2024: A8L - Vogue marbre à définir G6G - New Spirit G6H - New Spirit à manettes G7K - Soho 2023 G7L - SOHO METAL (nouveau design) G7R - Yoko G7S - Yoko Color G7T - Yoko Ice G7U - Yoko Howlite G7V - Yoko Delta G7W - Yoko Delta Howlite U2K - So U4J - ZOOM.5 U4K - ZOOM.7 U4L - ZOOM.12 U5K - Camélia Cristal noir U5L - Camélia Cristal clair U5N - New Island U5P - New Paradise U6M - Mille nuits Cristal clair U6N - Mille nuits Cristal couleur Champagne U6P - Mille nuits - cristal brume XA2 - Peter/One Hype Park XA5 - Plaza XB7 - Charleston – Spirit XC1 - XC1 A3Z - Marina Marbre à définir Finishes: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD. Complete model number compiles of a three digit code from each section above, for example A04 82/W A01.

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of shower handsets with (plastic bodies - various finishes). The inlets incorporate a plastic flow restrictor. Maximum operating temperature 60.0°C Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309055

Size:

½” BSP (M)

Marking:

Ideal Standard on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

A7896AA A7896A2 A7896A5 A7896GN A7896XG B953144AA B953144A2 B953144A5 B953144GN B953144XG A7895AA A7896**and B953144** are 3 functions hand showers. All models have same structures and same materials in contact with water. The difference between the A7896**and B953144** is only package. The package of A7896** is colour box packing and B953144** is white box packing. “**” indicates different finishes AA: Chrome A2: Brushed gold A5: Magnetic grey GN: Silver Storm XG: Silk black A7895AA is a single function hand shower. Chrome finish.

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2306071

Size:

Please refer to model.

Marking:

Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

C54400 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ½" BSP C54401 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ¾" BSP C54402 *CB WRAS 30CM FLEX TAP CONNS 22mm X F ¾" BSP C54403 *CB WRAS 50CM FLEX TAP CONNS 15mm X F ½" BSP C54404 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ½"BSP C54405 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ¾" BSP C54406 *CB WRAS ISO FLEX TAP CONS 22mm iso valve x F ¾" BSP C54412 *CB WRAS M10 MONO FLEX TAP CONNS 15mm x M10 C54413 *CB WRAS M12 MONO FLEX TAP CONNS 15mm x M12 C54414 *CB WRAS 30CM FLEX TAP CONNS 15mm x 15mm

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

General Email

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

General Email

View All Listings by this Company

Range of shower hoses with TPE linings and EPDM ‘O’-rings. Maximum operating temperature 60°C. Open outlet use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303074

Marking:

Hansgrohe on conical nut.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

30 334 118 Hansgrohe Metaflex'C 800mm chrome, 28 152 xxx Hansgrohe Mariflex showerhose 1250mm, 28 262 xxx Hansgrohe Metaflex C showerhose 1250mm chrome, 28 644 xxx Hansgrohe Metaflex Shower hose 1250mm, 30 475 518 Hansgrohe Metaflex C showerhose 1250mm, 28 153 xxx Hansgrohe Mariflex showerhose 1500mm, 28 263 xxx Hansgrohe Metaflex C showerhose 1500mm, 28 645 xxx Hansgrohe Metaflex Shower hose 1500mm, 28 266 xxx Hansgrohe Metaflex C showerhose 1600mm chrome, 30 475 618 Hansgrohe Meta showerhose 1600mm, 31 475 618 Hansgrohe Metaflex C 1600mm, 28 155 xxx Hansgrohe Mariflex showerhose 1750mm, 28 265 xxx Hansgrohe Metaflex C showerhose 1750mm, 28 646 xxx Hansgrohe Metaflex Shower hose 1750mm, 30 511 718 Hansgrohe Metaflex showerhose 1750mm, 28 154 xxx Hansgrohe Mariflex showerhose 2000mm, 28 264 xxx Hansgrohe Metaflex C showerhose 2000mm chrome, 28 647 xxx Hansgrohe Metaflex Shower hose 2000mm.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of 2 and 3 port manifold assemblies with brass bodies incorporating ‘Tectite Classic’ push-fit fittings for use with either copper pipe (manufactured to EN1057), PEX pipe (manufactured to BS7291-3:2010) or PB pipe (manufactured to BS7291-2). Maximum working temperature and pressure: Use with copper pipe: 16.0 bar @ 30°C, 10.0 bar @ 65°C & 6.0 bar @ 95°C. Use with PEX & Polybutylene: 12.0 bar @ 20°C, 6.0 bar @ 65°C & 3.0 bar @ 92°C.

Non-metallic materials and components comply with BS6920 at See description °C

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

2306056

Size:

22mm stub, 22mm push-fit with 15mm push-fit ports.

Marking:

Tectite, CR & Size on body.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

45943 (2 Port) & 45944 (3 Port).

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of exposed and conceled thermostatic mixing valves with brass bodies (chrome plated or finished for concelled). Incorporating single check valves at the inlets, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2305331

Size:

15mm compression

Marking:

Rada logo on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2028

Model:

1.0.407.06.3 Rada 215 Rada 215-T3 DK 1.0.440.01.1 Rada 215 Rada 215-T3 C 1.0.440.03.1 Rada 215 Rada 215-T3 ZC 1.1374.008 Rada 215 Rada 215-T3 OEM 1.1624.001 Rada 215 Rada 215-T3 BC 1.0.407.07.3 Rada 222 Rada 222-T3 DK

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of T type thermostatic blending valves incorporating stainless steel strainers at the inlet. “2 IN 1” models incorporate check valve cartridges at both inlets. “4 IN 1” models have angled isolation valves at both inlets which incorporate a check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2309015

Size:

Please refer to model

Marking:

TGL, Flow arrow and OBR on body

Installation Requirements:

R001 R120

Expiry date:

30/09/2028

Model:

TG LYNES TMV2/3 (2 IN 1) - 15mm V0001599 (HEAT110060), TG LYNES TMV2/3 (2 IN 1) - 22mm V0001600 (HEAT110090), TG LYNES TMV2/3 (4 IN 1) - 15mm V0001446 (HEAT110065) TG LYNES TMV2/3 (4 IN 1) - 22mm V0001598 (HEAT110095)

Approval Holder:

TG Lynes Limited

Company Name

TG Lynes Limited

Address

115 Brancroft Way, Enfield, Middlesex

Postcode

EN3 7QE

View All Listings by this Company

Range of T type thermostatic blending valves (chromium plated, DZR brass) Maximum working pressure 10.0 bar. Maximum operating temperature 62°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2309349

Size:

34401010400 (DN15): ½” BSP (M) x ¾” BSP (F) adaptor. 34401010500 (DN20): ¾” BSP (M) x ½” BSP (M) adaptor.

Marking:

IMI TA and TA Mix on cap and body. CR on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2028

Model:

34401010400 – T36 Multi-user thermostatic mixer T360120G.GR-IM, TA MIX DN15. 34401010500 – T36 Multi-user thermostatic mixer T360120G.GR-IM, TA MIX DN20.

Approval Holder:

IMI Hydronic Engineering International

Company Name

IMI Hydronic Engineering International

Address

Route de Crassier 19, CH - 1262 Eysins, CHE-168.471.117

View All Listings by this Company

Manufacturer:

Boeme srl.

Company Name

Boeme srl.

Address

IT01590160030 VIA ALLO STREGO 1 28010 CAVALLIRIO

Country

ITALY

View All Listings by this Company

Range of wall mounted, concealed thermostatic blending valves or exposed bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button incorporate. An approved check valve cartridge is also supplied, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (NU‐035 & NU‐037 models. All other models 60°C only).

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2212362

Size:

¾” x ½” BSP (M) offset union for exposed models & ¾” BSP (F) for concealed models.

Marking:

Harrison Bathrooms Logo on cover panel.

Installation Requirements:

R001 R010 R040

Expiry date:

31/12/2027

Model:

NU‐036, NU‐043, NU‐037, NU‐044, NU‐035 & NU‐042

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Range of wafer, lugged and double bridge type butterfly valves with blue epoxy coated ductile iron bodies, stainless steel or blue epoxy coated ductile iron discs and EPDM seats. JMC 31300/71300/61300 and PAR W/L/DF.112 models have stainless steel discs (DN50 to 250: ASTM CF3 M (1.4409) DN>250 ASTM CF8M (1.4408)); all other models have blue epoxy coated ductile iron discs. All valves are bare shaft without an operating member. Maximum working pressure 25.0 bar. Maximum operating temperature: JMC 31V00/71V00/61V00, PAR W/L/DF.P07 and PAR W/L/DF.112 models are 50°C. JMC 31W00/71W00/61W00 and PAR W/L/DF.P08 models are cold water use only.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2307049

Size:

Wafer and Lugged: DN50 - 1000 flanged. Double bridged: DN500 - 1000 flanged.

Marking:

JMC models: SAPAG, JMC, SAPAG sales code (e.g., 31V00), size, maximum pressure, maximum temperature, year of manufacture followed by production order no. (YY/production order no.) and SAPAG on data plate on body. PARASEAL models: KEYSTONE, PARASEAL, trim (e.g., W.P07), size, maximum pressure, maximum temperature, Keystone sales code, year of manufacture followed by production order no. (YY/production order no.) and SAPAG on data plate on body.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

JMC - SAPAG Branded: JMC 31300 (Wafer), JMC 61300 (Lugged), JMC 71300 (Double flanged). JMC 31V00 (Wafer), JMC 61V00 (Lugged), JMC 71V00 (Double flanged), JMC 31W00 (Wafer), JMC 61W00 (Lugged), JMC 71W00 (Double flanged). PARASEAL - KEYSTONE branded: PAR W.112 (31300) (Wafer), PAR L.112 (71300) (Lugged), PAR DF.112 (61300) (Double flanged), PAR W.P07 (31V00) (Wafer), PAR L.P07 (71V00) (Lugged), PAR DF.P07 (61V00) (Double flanged), PAR W.P08 (31W00) (Wafer), PAR L.P08 (71W00) (Lugged), PAR DF.P08 (61W00) (Double flanged).

Approval Holder:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

Manufacturer:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

Range of bath mixer valves with brass bodies, incorporating a ceramic cartridge headwork, single lever operating members and self cancelling diverter to bath and shower outlet. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

2306302

Size:

¾” BSP (F)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

Rebris S range: 72 448 xxx 72 449 xxx 72 466 xxx 72 467 xxx Rebris E range: 72 458 xxx 72 459 xxx 72 468 xxx 72 469 xxx Models added September 2023: 71 467 xxx, 71 469 xxx. Models added April 2024: 71 408 xxx, 71 246 xxx, 71 245 xxx, 31 779 xxx. Models added June 2025: 71 482 xx0, 71 483, xx0, 71 484 xx0.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2207394

Size:

05272082, 5059340244747 & 05317004 15mm compression x ¾” BSP (M), 05317011 15mm comp n x ¾” BSP (M), 05317035 15mm compression x 15mm compression x ¾” BSP (M), 5063022070173 15mm compression x ¾” BSP (M) x ¾” BSP (M),

Marking:

Model 05317035 & 5063022070173 flomasta, flow arrow and date of manufacture (MM-YY) on body. Model 05272082 B&Q flow arrow and date of manufacture (MM-YY) on body. Models 5059340244747, 05317004 & 05317011 SF, flow arrow and date of manufacture (MM-YY) on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

05272082 STR WASHING MACHINE TAP CP, 5059340244747 ELBOW WASHING MACHINE TAP CP, 05317004 TEE WASHING MACHINE TAP CP, 05317035 TEE WASHING MACHINE TAP CP, 5063022070173 ISOLATING VALVE WITH T HANDLE 05317011 ISOLATING VALVE WITH T HANDLE .

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of stainless steel spherical valves, incorporating T-type or single lever operating members with a stainless steel ball and PTFE seats. Maximum working pressure 63.0bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2307908

Marking:

Models: ½” – 1” VTc, material code 1.4408, date of manufacture, valve size in DN & inch format, pressure rating (PN) and cast numbers. Models: 1 ¼” – 2” VTc, material code 1.4408, date of manufacture, valve size in DN & inch format, pressure rating (PN), cast numbers, CE mark and min/max temperature ratings.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

V6200 (Lever handle) ½” – 2” BSP (F) V6205 (Tee Handle) ½” – 1” BSP (F).

Approval Holder:

LEENGATE VALVES LIMITED

Company Name

LEENGATE VALVES LIMITED

Address

UNIT 2, GRANGE CLOSE Clovernook Industrial Estate Derby

Postcode

DE55 4QT

Country

United Kingdom

Phone

+44 (0) 1773 521555

General Email

arran@leengatevalves.co.uk

View All Listings by this Company

Manufacturer:

Valtec Ind.co.Ltd

Company Name

Valtec Ind.co.Ltd

Address

105 Cheng Kuang Str Taiping Taichung

Country

Taiwan

General Email

View All Listings by this Company

Range of stainless spherical valves, incorporating a stainless steel ball, PTFE seats and single ever operating members. Maximum working pressure 16.0 bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2307909

Size:

½” – 4” Flanged (DN15 – DN100).

Marking:

Models: ½” – 1” VTc, material code 1.4408, date of manufacture, valve size in DN & inch format, pressure rating (PN) and cast numbers. Models: 1 ¼” – 4” VTc, material code 1.4408, date of manufacture, valve size in DN & inch format, pressure rating (PN), cast numbers, CE mark and min/max temperature ratings.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

V6350

Approval Holder:

LEENGATE VALVES LIMITED

Company Name

LEENGATE VALVES LIMITED

Address

UNIT 2, GRANGE CLOSE Clovernook Industrial Estate Derby

Postcode

DE55 4QT

Country

United Kingdom

Phone

+44 (0) 1773 521555

General Email

arran@leengatevalves.co.uk

View All Listings by this Company

Manufacturer:

Valtec Ind.co.Ltd

Company Name

Valtec Ind.co.Ltd

Address

105 Cheng Kuang Str Taiping Taichung

Country

Taiwan

General Email

View All Listings by this Company

Range of inline spherical valves, (nickel plated brass bodies), chrome plated brass balls, PTFE seats and washers with lock-shield, single lever or T-type operating members. Maximum working pressure: ¼” to 1” = 40.0 bar, 1¼” to 2” = 32.0 bar, 2½” to 3” = 25.0 bar, 4” = 20.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2304089

Size:

See Models

Marking:

Boss, WRAS and Model on operating member Size, PN & DN on body.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

37184108 - 8MM 966SBL BOSS NP BALL VALVE 37184119 - 10MM 966SBL BOSS NP BALL VALVE 37184130 - 15MM 966SBL BOSS NP BALL VALVE 37184141 - 20MM 966SBL BOSS NP BALL VALVE 37184152 - 25MM 966SBL BOSS NP BALL VALVE 37184163 - 32MM 966SBL BOSS NP BALL VALVE 37184174 - 40MM 966SBL BOSS NP BALL VALVE 37184185 - 50MM 966SBL BOSS NP BALL VALVE 37184204 - 8MM 966SRL BOSS NP BALL VALVE 37184215 - 10MM 966SRL BOSS NP BALL VALVE 37184226 - 15MM 966SRL BOSS NP BALL VALVE 37184237 - 20MM 966SRL BOSS NP BALL VALVE 37184248 - 25MM 966SRL BOSS NP BALL VALVE 37184259 - 32MM 966SRL BOSS NP BALL VALVE 37184270 - 40MM 966SRL BOSS NP BALL VALVE 37184281 - 50MM 966SRL BOSS NP BALL VALVE 37184300 - 8MM 966T BOSS NP BALL VALVE 37184311 - 10MM 966T BOSS NP BALL VALVE 37184322 - 15MM 966T BOSS NP BALL VALVE 37184333 - 20MM 966T BOSS NP BALL VALVE 37184344 - 25MM 966T BOSS NP BALL VALVE 37184355 - 32MM 966T BOSS NP BALL VALVE 37184407 - 15MM 966EXT BOSS NP BALL VALVE 37184418 - 20MM 966EXT BOSS NP BALL VALVE 37184429 - 25MM 966EXT BOSS NP BALL VALVE 37184440 - 32MM 966EXT BOSS NP BALL VALVE 37184451 - 40MM 966EXT BOSS NP BALL VALVE 37184462 - 50MM 966EXT BOSS NP BALL VALVE 37184503 - 15MM 966LS BOSS NP BALL VALVE 37184514 - 20MM 966LS BOSS NP BALL VALVE 37184525 - 25MM 966LS BOSS NP BALL VALVE 37184536 - 32MM 966LS BOSS NP BALL VALVE 37184547 - 40MM 966LS BOSS NP BALL VALVE 37184558 - 50MM 966LS BOSS NP BALL VALVE 37184643 - 65MM 967SBL BOSS NP BALL VALVE 37184654 - 80MM 967SBL BOSS NP BALL VALVE 37184665 - 100MM 967SBL BOSS NP BALL VVE 37184706 - 65MM 967SRL BOSS NP BALL VALVE 37184717 - 80MM 967SRL BOSS NP BALL VALVE 37184728 - 100MM 967SRL BOSS NP BALL VVE

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of lever operated, full bore spherical valves with brass bodies (brushed chrome) and chrome plated brass balls and a range of different operating members. Sizes ¼” to ½” have a maximum working pressure of 64.0 bar. Sizes ¾” to 2½” have a maximum working pressure of 40.0 bar. Cold water use only.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2309304

Size:

See models

Marking:

RIV logo & technical info on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

'Professional Series', comprising of models: RIV4190 ¼” – 2½” (aluminium lever type). RIV4192 ¼” – 2” (steel lever type). RIV4194 ¼” – 1” (aluminium butterfly lever type). RIV4195 ½” – 2½” (brass square cap). RIV4197 3/8" - 2½” (brass square cap). RIV4198 ½” – 2” (tamperproof brass square cap). RIV4199 ¼” – 2½” (aluminium lever handle). RIV4350 3/8" - 2½” (aluminium lever handle). RIV4354 3/8" - 1” (aluminium butterfly handle). RIV4355 ½” – 2½” (brass square cap). RIV4357 ½” – 2½” (brass square cap). RIV4358 ½” – 2” (tamperproof brass square cap). RIV4420 ½” – 2” (aluminium lever handle). RIV4424 ½” – 1” (aluminium lever handle). RIV4425 ½” – 2” (brass square cap). RIV4427 ½” – 2” (brass square cap). Models added July 2025: RIV7163 ¼” to ½” & ¾” to 2”. RIV7164 ¼” to ½” & ¾” to 1”. RIV7220 ¼” to ½” & ¾” to 2”. RIV7224 ¼” to ½” & ¾” to 1”.

Approval Holder:

RIV Rubinetterie Italiane Velatta S.p.A.

Company Name

RIV Rubinetterie Italiane Velatta S.p.A.

Address

Via Delle Acacie 8, Zona Industriale D4 Grignasco

Postcode

28075

Country

Italy

General Email

quality@riv-vg.com

View All Listings by this Company

Manufacturer:

RIV Rubinetterie Italiane Velatta S.p.A.

Company Name

RIV Rubinetterie Italiane Velatta S.p.A.

Address

Via Delle Acacie 8, Zona Industriale D4 Grignasco

Postcode

28075

Country

Italy

General Email

quality@riv-vg.com

View All Listings by this Company

Range of press fit spherical valves with DZR brass bodies and balls with EPDM O-Rings. Joints are achieved by the use of a press fitting tool. For use with Multi-layered Pert/Al/Pert pipe compliant to EN21003-2 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2309047

Size:

16mm, 20mm, 26mm, & 32mm

Marking:

South coast sales logo, Size and PN on body. South coast sales logo and Wras on operating member.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

SLV11-16MM SVL22-20MM SLV33-26MM SLV44-32MM

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

Ultra-violet disinfection unit comprising of a stainless-steel body and quartz sleeve. Maximum working pressure 8.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Size:

See models.

Marking:

Silverline, model number and serial number on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/06/2028

Model:

½” BSP (F) ports: UV-DS08/PP/1/2, UV-DS08/1/2/12V, UV-DS08/1/2/R. ¾” BSP (F) ports: UV-DS15/PP/3/4, UV-DS15/PP/3/4/12V, UV-DS15/PP/3/4/R, UV-DS36, UV-DS36AM, UV-DS36AM/R, UV-DS30/PP/3/4, UV-DS30/PP/3/4/12V, UV-DS30/PP/3/4/R, UV-DS30/OS/3/4, UV-DS30/OS/3/4/12V, UV-DS30/OS/3/4/R, UV-DS55/PP/3/4, UV-DS55/PP/3/4/12V, UV-DS55/PP/3/4/R, UV-DS55/OS/3/4, UV-DS55/OS/3/4/12V, UV-DS55/OS/3/4/R, 1” BSP (F) ports: UV-DS75/PP/1, UV-DS75/PP/1/12V, UV-DS75/PP/1/R. 1½” BSP (M) ports: UV-CS110, UV-CS110/AUX, UV-CS165, UV-CS165/AUX. 2” BSP (M) ports: UV-CS220, UV-CS220/AUX, 2½” flanged ports: UV-CS330, UV-CS330/AUX. 3” flanged ports: UV-CS440, UV-CS440/AUX, UV-CS550, UV-CS550/AUX

Approval Holder:

Silverline UK Ltd

Company Name

Silverline UK Ltd

Address

Whitemoor Iddesleigh Winkleigh

Postcode

EX19 8BN

Country

Devon

Phone

01805 804202

General Email

enquiries@silverlineuk.co.uk

View All Listings by this Company

Manufacturer:

Silverline UK Ltd

Company Name

Silverline UK Ltd

Address

Whitemoor Iddesleigh Winkleigh

Postcode

EX19 8BN

Country

Devon

Phone

01805 804202

General Email

enquiries@silverlineuk.co.uk

View All Listings by this Company

Ultra-violet disinfection unit comprising of a stainless-steel body and quartz sleeve. Maximum working pressure 8.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Size:

See models.

Marking:

Beresford-Grey & Company Information on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/06/2028

Model:

1½” BSP (M) ports: BGUV-CS072 & BGUV-CS108 2” BSP (M) ports: BGUV-CS144 2½” flanged ports: BGUV-CS216 3” flanged ports: BGUV-CS288 & BGUV-CS360

Approval Holder:

Pumps & Controls Ltd

Company Name

Pumps & Controls Ltd

Address

The Fox Inn Little Ryton Dorrington Shrewsbury

Postcode

SY5 7LS

Country

United Kingdom

General Email

sales@pumpsandcontrolsltd.co.uk

View All Listings by this Company

KARUMEL EX4413-F103. Factory applied, fusion bonded, epoxy powder coating available in blue or red. Apply and cure in accordance with 'Application Guide KARUMEL EX4413-F103', issue 'KCSA-230201', dated February 2023, (curing as per Section 3.6). For use with water up to 85°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2310524

Expiry date:

31/10/2028

Approval Holder:

KCC International Paints Co., Ltd.

Company Name

KCC International Paints Co., Ltd.

Address

3942 Road 118, 3rd Industrial Area, Al Jubail 35729-7317

Country

Saudi Arabia

View All Listings by this Company

''Teflon® PFA 340 X, 345 X, 350 X, 350-T-J, 440 HP X, 445 HP X, 450 HP X & 416 HP X'. Unpigmented (white coloured), compression moulded PFA materials. For use with water up to 85°C.

Section:

5293 Perfluoroalkoxy (PFA) Copolymer

Expiry date:

31/03/2028

Approval Holder:

Chemours International Operations Sàrl

Company Name

Chemours International Operations Sàrl

Address

Route du Nant-d'Avril 150, 1217 Meyrin

Country

Switzerland

View All Listings by this Company

'24410001 & 24410002'. White coloured, compression moulded PTFE materials. For use with water up to 85°C.

Section:

5295 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211565

Expiry date:

30/11/2027

Approval Holder:

Eautechnik GmbH

Company Name

Eautechnik GmbH

Country

Germany

View All Listings by this Company

'Z440'. Black coloured, compression moulded FKM 'O' ring. Shore hardness 70. Tested in-radius size 5.0mm. For use with water up to 85°C.

Section:

5370 Rubbers

Section Subtitle:

Fluoroelastomers - components.

WRAS Approval Number:

2306524

Expiry date:

30/06/2028

Approval Holder:

Oringone S.R.L

Company Name

Oringone S.R.L

Address

Grumello del Monte (BG) Via Tribolina 16B, 24064

Country

Italy

View All Listings by this Company

Single hole, triple outlet (swivel) combination tap assembly (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with single lever operating member. Electronic controls allow the tap to dispense boiling, chilled or sparkling water. The vented models are supplied with a brass adaptor containing a plastic flow regulator and a combined EPDM washer and stainless-steel strainer, for installation on the mains cold water into the ceramic cartridge. They are also supplied with a stainless steel braided PEX lined flexible hose assembly and a stainless steel braided TPSiV lined flexible hose assembly both with ½” captive nut end connections for installation between the tap and a command centre, (which is not included as part of this approval). Maximum working pressure 5.0 bar. Maximum operating temperatures: Near boiling water circuit: 100°C. Ambient hot and cold (mixed) circuit: 65°C. Chilled/Chilled and sparkling circuit: Cold water use only.

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.

WRAS Approval Number:

2307066

Note:

R008 applies to items on the chilled and sparkling circuit.

Size:

Mains models: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections. Vented models: Stainless steel braided PEX lined flexible hose assembly with ½” captive nut end connection.

Marking:

Zip logo (‘Zip’) on operating member.

Installation Requirements:

R001 R006 R007 R008 R009 R160

Expiry date:

31/07/2028

Model:

HydroTap Classic Plus All In One range: 91625XXX: BC Mains, 91626XXX: BCS Mains, 91633XXX: BC Vented, 91634XXX: BC Vented. Where XXX denotes finish: Blank = Bright Chrome, Z01 = Brushed Chrome, Z03 = Matt Black. HydroTap Classic All In One range: 93331UK: BC Mains (Bright Chrome), 93339UK: BC Mains (Brushed Chrome), 93355UK: BC Mains (Matt Black), 93335UK: BCS Mains (Bright Chrome), 93343UK: BCS Mains (Brushed Chrome), 93359UK: BCS Mains (Matt Black), 93332UK: BC Vented (Bright Chrome), 93340UK: BC Vented (Brushed Chrome), 93356UK: BC Vented (Matt Black), 93336UK: BCS Vented (Bright Chrome), 93344UK: BCS Vented (Brushed Chrome), 93360UK: BCS Vented (Matt Black). Where (for all models): B = (Near) Boiling water. C = Chilled water. S = Sparkling water.

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Range of overhead shower outlets, (chrome plated ABS bodies). The inlets incorporate a plastic flow regulator. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2311362

Size:

½ BSP (F)

Marking:

Almar logo on body

Installation Requirements:

R001 R040

Expiry date:

30/11/2028

Model:

Round Emotion Shower Head D200 – D300 E044075 E044076 E044210 E044049 E044050 E044252 E044040 E044044 E044072 Square Emotion Shower Head D200 – D300 E044077 E044078 E044209 E044220 E044229 E044234 E044039 E044043 E044069

Approval Holder:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with or without a pop-up waste (see model), Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2307043

Note:

No testing performed on pop-up waste.

Size:

71 443 xxx and 31931xx0 models: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating ⅜” captive nut end connections. All other models: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

71 581 xxx Vernis Blend Single lever basin mixer 190 with metal pop-up waste set, 71 582 xxx Vernis Blend Single lever basin mixer 190 without waste set, 71 562 xxx Vernis Shape Single lever basin mixer 190 with pop-up waste set, 71 590 xxx Vernis Shape Single lever basin mixer 190 with metal pop-up waste set, 71 591 xxx Vernis Shape Single lever basin mixer 190 without waste set, 71 552 xxx Vernis Blend Single lever basin mixer 190 with pop-up waste set, 71 443 xxx Vernis Blend Single lever bath mixer Monotrou. 31 931 xx0 Focus Blend Single lever bath mixer Monotrou. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of overhead shower outlets, (chrome plated ABS bodies). The inlets incorporate a plastic flow regulator. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2311370

Size:

½ BSP (F)

Marking:

Fima on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2028

Model:

Square Ø200-Ø300 F2216/2xx.WR F2950/2INOX.WR F2949/2INOX.WR F2630/2xx.WR F2445/2xx.WR F2620/2xx.WR F2987/2xx.WR F2630/2INOX.WR F2795/2xx.wR Round Ø200-Ø300 F2948/2INOX.WR F2224/2xx.WR F2947/2INOX.WR F2117/2xx.WR F2621/2xx.WR F2267/2xx.WR F2794/2xx.WR F2621/2INOX.WR xx indicate finish= CR CHROME CN BLACK CHROME CS BRUSHED BLACK CHROME SN BRUSHED NIKEL OS BRUSHED GOLD OR GOLD BS WHITE MATT NS BLACK MATT BR OLD BRONZE RA OLD COPPER IN STAINLESS STEEL MN BLACK MARBLE MB WHITE MATT AZ INDIGO BLUE VE AGAVE GREEN AG IVORY WHITE ZL AMBER BRONZE ZS BRUSHED AMBER BRONZE HL CHAMPAGNE HS BRUSHED CHAMPAGNE

Approval Holder:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Range of two-hole, single outlet, fixed combination tap assemblies, (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates plastic flow straighteners. The products are supplied with a shower hose, handset and metal back nuts. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2312357

Size:

¾” BSP (M)

Marking:

Bristan on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/12/2028

Model:

APL BSM C APL BSM BLK APL BSM BB APE BSM C APE BSM BLK APE BSM BB APE BSM GM 283644 283647 Model added February 2026: RP3 APE BSM BLK

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of floor mounted single hole, single outlet (swivel), combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C.

Section:

0471 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout incorporating a manual diverter to a shower outlet.

WRAS Approval Number:

240402024

Size:

Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Lota on body

Installation Requirements:

R001 R009 R020

Expiry date:

30/04/2029

Model:

63661-50X 63668-50X 1.X means different finishes as the following: Finishes as 01= Chrome, 6801 = Matt black, 4408 = Brushed brass, 0402 = Brushed nickel PVD, 5804 = Heirloom silver, 04 = Brushed nickel 4403= Brushed brass(light) 0408=Brushed stainless steel. 2. 63661-50X and 63668-50X are with total identical swivel spout function but the only difference is shape of spout outlet and handle.

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of two-hole, single outlet fixed combination tap assemblies (brass bodies - various finishes, see model), incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. BS6920 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2311048

Size:

¾” BSP (M).

Marking:

Lota on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

63659-50X & 63666-50X Where X denotes finish and can be replaced with: 01 = Chrome, 6801 = Matt Black, 4408 = Brushed brass, 0402 = Brushed nickel PVD, 5804 = Heirloom silver, 04 = Brushed nickel, 4403 = Brushed brass (light), 0408 = Brushed stainless steel.

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating ceramic cartridge headworks and single lever type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240102038

Size:

½” BSP F

Marking:

Lota logo on spout faceplate

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2029

Model:

63658-50X 63665-50X X means different finishes as the following: Finishes as 01= Chrome 6801 = Matt black 4408 = Brushed brass 0402 = Brushed nickel PVD 5804 = Heirloom silver 04 = Brushed nickel 4403= Brushed brass(light) 0408=Brushed stainless steel.

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (brass body – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240402023

Size:

¾” BSP (M)

Marking:

Lota on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2029

Model:

63682-50X, 63685-50X, 63688-50X, 63699-50X. Where X denotes the finish and can be replaced with any of the following: 0107 Chrome, 0004 Brushed Nickel, 4408 Brushed Brass, 6801 Matt Black, 4403 Brushed Brass (light), 0402 Brushed Nickel PVD, 5804 Heirloom silver, 0408 Brushed stainless steel.

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with metal back nuts, shower hose and handset. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2311027

Size:

¾” BSP (M)

Marking:

Lota on body

Installation Requirements:

R001 R006 R020

Expiry date:

30/11/2028

Model:

63667-50X 63660-50X X means different finishes as the following: Finishes as 01= Chrome, 6801 = Matt black, 4408 = Brushed brass, 0402 = Brushed nickel PVD, 5804 = Heirloom silver, 04 = Brushed nickel,4403= Brushed brass(light),0408=Brushed stainless steel.

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of deck mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator, and the product is supplied with shower hose and handset (with flow regulator) and metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

240402022

Size:

¾” BSP (M). Claims for flow rate, accuracy & working pressure by are made by the manufacturer and not considered part of the listing.

Marking:

Lota on body.

Installation Requirements:

R001 R006 R020

Expiry date:

30/04/2029

Model:

63683-50X, 63686-50X, 63689-50X, 63444-51X. Where ‘X’ denotes the finish and can be replaced with any of the following: 0107 = Chrome, 0004 = Brushed Nickel, 4408 = Brushed Brass, 6801 = Matt Black, 4403 = Brushed Brass(light), 0402 = Brushed Nickel PVD, 5804 = Heirloom silver, 0408 = Brushed stainless steel.

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (brass bodies – chrome plated), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240202039

Size:

3/4" BSP (M) X 1/2" BSP (M) offset union

Marking:

Delabie logo on operating member

Installation Requirements:

R001 R040

Expiry date:

28/02/2029

Model:

2446EP 2446EPS 2446LEP 2446LEPS

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with either cross top, dome type or single lever operating members (see model). The spout outlet, excluding the F6134 & F6144 models, incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240402067

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

F5175 model: ¾” BSP (M). All other models: ½” BSP (M).

Marking:

Lanbiao on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2029

Model:

F6144** (Single Lever), F6134** (Dome Type), F1027** (Cross Top), F1087** (Cross Top), F1079** (Single Lever), F5175** (Single Lever), F1077** (Single Lever). Where ** denotes finish and can be replaced with: No Suffix = Chrome, H = Black, N = Nickel Brushed, GJS = Gold Brushed, G = Gold, QTSL = Bronze Brushed Bright, QTS = Bronze Brushed Matt, TJ = Titanium Gold, TJLS = Titanium Gold Brushed, MGJ = Rose Gold, MGJL = Rose Gold Brushed, HGT = Red Bronze, HTL = Yellow Bronze Brushed, HTS = Red Bronze Brushed, PVDQH = Grey, HQ = Grey Brushed, Q = Bronze, DYB = Matt White, STS = Acid Copper Brushed, BZ = Perl White Painted, B = Matt White Painted, DMGJ = Gold Rose Brushed.

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Manufacturer:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2402703

Size:

¾” BSP (M)

Marking:

Samuel Heath on base of spout

Installation Requirements:

R001 R006 R010

Expiry date:

28/02/2029

Model:

V7K44-1YY-XX V7K44-2YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LL = Lathe Lever, LW = Lathe Wheel. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of deck mounted, three-hole, combination tap assemblies, (various finishes - see model), comprising of two ceramic cartridge headworks each with a single lever operating member. The product is supplied with stainless steel braided thermoplastic silicone (TPSiV) lined flexible connection hoses and a nylon braided silicone lined flexible hose assembly, which connects to a shower hose (brass double interlocked, PEX lined) and a deck mounted shower handset. Spout not supplied. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2210070

Note:

R007 does not apply to the shower hose. This approval does not include a spout.

Size:

½” BSP (M) (to tee piece).

Marking:

C.P.Hart on operating member and shower handset.

Installation Requirements:

R001 R007 R009 R010 R040

Expiry date:

31/10/2027

Model:

CPHSP30441XX lever w/ ABS handshower, CPHSP30441XXX lever w/ ABS handshower, CPHSP30441VXX lever w/ ABS handshower, CPHSP30441GXX lever w/ ABS handshower. CPHSP30441BXX lever w/ BRASS handshower, CPHSP30441BXXX lever w/ BRASS handshower, CPHSP30441BVXX lever w/ BRASS handshower, CPHSP30441BGXX lever w/ BRASS handshower. CPHMA31441XX ABS handshower, CPHMA31441BXX BRASS handshower. CPHSP30741SS lever w/ INOX handshower. The last “XX” indicates the finish suffix Each code may begin with “Z” or “s” CR: chrome, SN: brushed nickel, CN: black chrome, CS: brushed black chrome, BS: white matt, NS: black matt OR: gold, OS: brushed gold, BR: bronze RA: old copper F3074/INOX.WR does not have XX within the model code - INOX = Stainless steel.

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Range of four-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset. The shower handset inlet incorporates a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

240202033

Note:

The products are to be used with rough kit 13 444 180 Hansgrohe basic set for 4-hole rim mounted bath mixer or 15 480 180 AXOR basic set for 4-hole rim mounted bath mixer which are not part of this approval

Size:

Specifically for use with rough kit 13 444 180 or 15 480 180 which both have ½” BSP (M) inlets

Marking:

Axor or Hansgrohe on spout

Installation Requirements:

R001 R006 R020

Expiry date:

28/02/2029

Model:

39 446 xx0 (lever) 39 445 xx0 (cross top) 31 442 xx0 (lever) 16 546 xx0 (cross top) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

‘Uponor S-Press Plus’ compatible pipe and fittings system consisting of Uponor MLC pipe and Uponor Uni Pipe for use with Uponor S-Press plus metal and PPSU fittings. Maximum working pressure and operating temperature: 10.0 bar@70°C. Maximum working pressure and operating temperature: 16.0 bar @ Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2404900

Size:

16, 20, 25 & 32mm

Marking:

Uponor S-Press Plus and ‘U’ on fittings. Uponor and product information on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

1039929 Uponor S-Press PLUS elbow PPSU 16-16 1039930 Uponor S-Press PLUS elbow PPSU 20-20 1039931 Uponor S-Press PLUS elbow PPSU 25-25 1039932 Uponor S-Press PLUS elbow PPSU 32-32 1039933 Uponor S-Press PLUS coupling PPSU 16-16 1039934 Uponor S-Press PLUS coupling PPSU 20-20 1039935 Uponor S-Press PLUS coupling PPSU 25-25 1039936 Uponor S-Press PLUS coupling PPSU 32-32 1039937 Uponor S-Press PLUS reducer PPSU 20 -16 1039938 Uponor S-Press PLUS reducer PPSU 25-16 1039939 Uponor S-Press PLUS reducer PPSU 25-20 1039940 Uponor S-Press PLUS reducer PPSU 32-25 1039944 Uponor S-Press PLUS tee PPSU 16-16-16 1039945 Uponor S-Press PLUS tee PPSU 20-20-20 1039946 Uponor S-Press PLUS tee PPSU 25-25-25 1039947 Uponor S-Press PLUS tee PPSU 32-32-32 1039948 Uponor S-Press PLUS tee red. PPSU 16-20-16 1039949 Uponor S-Press PLUS tee red. PPSU 20-16-16 1039950 Uponor S-Press PLUS tee red. PPSU 20-16-20 1039951 Uponor S-Press PLUS tee red. PPSU 20-20-16 1039952 Uponor S-Press PLUS tee red. PPSU 20-25-20 1039953 Uponor S-Press PLUS tee red. PPSU 25-16-16 1039954 Uponor S-Press PLUS tee red. PPSU 25-16-20 1039955 Uponor S-Press PLUS tee red. PPSU 25-16-25 1039956 Uponor S-Press PLUS tee red. PPSU 25-20-20 1039957 Uponor S-Press PLUS tee red. PPSU 25-20-25 1039958 Uponor S-Press PLUS tee red. PPSU 32-16-32 1039959 Uponor S-Press PLUS tee red. PPSU 32-20-32 1039960 Uponor S-Press PLUS tee red. PPSU 32-25-25 1039961 Uponor S-Press PLUS tee red. PPSU 32-25-32 1070501 Uponor S-Press PLUS adapter male thread 16-R3/8"MT 1070502 Uponor S-Press PLUS adapter male thread 16-R1/2"MT 1070503 Uponor S-Press PLUS adapter male thread 16-R3/4"MT 1070504 Uponor S-Press PLUS adapter male thread 20-R1/2"MT 1070505 Uponor S-Press PLUS adapter male thread 20-R3/4"MT 1070506 Uponor S-Press PLUS adapter male thread 20-R1"MT 1070507 Uponor S-Press PLUS adapter male thread 25-R3/4"MT 1070508 Uponor S-Press PLUS adapter male thread 25-R1"MT 1070509 Uponor S-Press PLUS adapter male thread 32-R1"MT 1070510 Uponor S-Press PLUS adapter male thread 32-R1 1/4"MT 1070515 Uponor S-Press PLUS adapt. female thread 16-Rp1/2"FT 1070516 Uponor S-Press PLUS adapt. female thread 20-Rp1/2"FT 1070517 Uponor S-Press PLUS adapt. female thread 20-Rp3/4"FT 1070518 Uponor S-Press PLUS adapt. female thread 20-Rp1"FT 1070519 Uponor S-Press PLUS adapt. female thread 25-Rp3/4"FT 1070520 Uponor S-Press PLUS adapt. female thread 25-Rp1"FT 1070521 Uponor S-Press PLUS adapt. female thread 32-Rp1"FT 1070522 Uponor S-Press PLUS adapt. female thread 32-Rp1 1/4"FT 1070523 Uponor S-Press PLUS elbow 16-16 1070524 Uponor S-Press PLUS elbow 20-20 1070525 Uponor S-Press PLUS elbow 25-25 1070526 Uponor S-Press PLUS elbow 32-32 1070531 Uponor S-Press PLUS elbow male thread 16-R3/8"MT 1070532 Uponor S-Press PLUS elbow male thread 16-R1/2"MT 1070533 Uponor S-Press PLUS elbow male thread 20-R1/2"MT 1070534 Uponor S-Press PLUS elbow male thread 20-R3/4"MT 1070535 Uponor S-Press PLUS elbow male thread 25-R3/4"MT 1070536 Uponor S-Press PLUS elbow male thread 25-R1"MT 1070537 Uponor S-Press PLUS elbow male thread 32-R1"MT 1070539 Uponor S-Press PLUS elbow female thread 16-Rp1/2"FT 1070540 Uponor S-Press PLUS elbow female thread 20-Rp1/2"FT 1070541 Uponor S-Press PLUS elbow female thread 20-Rp3/4"FT 1070542 Uponor S-Press PLUS elbow female thread 25-Rp3/4"FT 1070543 Uponor S-Press PLUS elbow female thread 25-Rp1"FT 1070544 Uponor S-Press PLUS elbow female thread 32-Rp1"FT 1070545 Uponor S-Press PLUS elbow 45deg 25-25 1070546 Uponor S-Press PLUS elbow 45deg 32-32 1070547 Uponor S-Press PLUS coupling 16-16 1070548 Uponor S-Press PLUS coupling 20-20 1070549 Uponor S-Press PLUS coupling 25-25 1070550 Uponor S-Press PLUS coupling 32-32 1070552 Uponor S-Press PLUS reducer 20-16 1070553 Uponor S-Press PLUS reducer 25-16 1070554 Uponor S-Press PLUS reducer 25-20 1070555 Uponor S-Press PLUS reducer 32-20 1070556 Uponor S-Press PLUS reducer 32-25 1070560 Uponor S-Press PLUS tee 16-16-16 1070561 Uponor S-Press PLUS tee 20-20-20 1070562 Uponor S-Press PLUS tee 25-25-25 1070563 Uponor S-Press PLUS tee 32-32-32 1070566 Uponor S-Press PLUS tee reducer 16-20-16 1070567 Uponor S-Press PLUS tee reducer 20-16-16 1070568 Uponor S-Press PLUS tee reducer 20-16-20 1070569 Uponor S-Press PLUS tee reducer 20-20-16 1070570 Uponor S-Press PLUS tee reducer 20-25-16 1070571 Uponor S-Press PLUS tee reducer 20-25-20 1070572 Uponor S-Press PLUS tee reducer 25-16-16 1070573 Uponor S-Press PLUS tee reducer 25-16-20 1070574 Uponor S-Press PLUS tee reducer 25-16-25 1070575 Uponor S-Press PLUS tee reducer 25-20-16 1070576 Uponor S-Press PLUS tee reducer 25-20-20 1070577 Uponor S-Press PLUS tee reducer 25-20-25 1070578 Uponor S-Press PLUS tee reducer 25-25-16 1070579 Uponor S-Press PLUS tee reducer 25-32-25 1070580 Uponor S-Press PLUS tee reducer 32-16-32 1070581 Uponor S-Press PLUS tee reducer 32-20-32 1070582 Uponor S-Press PLUS tee reducer 32-25-25 1070583 Uponor S-Press PLUS tee reducer 32-25-32 1070592 Uponor S-Press PLUS tee male thread 16-R1/2"MT-16 1070593 Uponor S-Press PLUS tee male thread 25-R3/4"MT-25 1070594 Uponor S-Press PLUS tee male thread 32-R3/4"MT-32

1070595 Uponor S-Press PLUS tee female thread 16-Rp1/2"FT-16 1070596 Uponor S-Press PLUS tee female thread 20-Rp1/2"FT-20 1070597 Uponor S-Press PLUS tee female thread 20-Rp3/4"FT-20 1070598 Uponor S-Press PLUS tee female thread 25-Rp1/2"FT-25 1070599 Uponor S-Press PLUS tee female thread 25-Rp3/4"FT-25 1070600 Uponor S-Press PLUS tee female thread 32-Rp1/2"FT-32 1070601 Uponor S-Press PLUS tee female thread 32-Rp3/4"FT-32 1070602 Uponor S-Press PLUS adapter swivel nut 16-G1/2"SN 1070708 Uponor S-Press PLUS adapter swivel nut 16-G3/8"SN 1070603 Uponor S-Press PLUS adapter swivel nut 16-G3/4"SN 1070604 Uponor S-Press PLUS adapter swivel nut 20-G1/2"SN 1070605 Uponor S-Press PLUS adapter swivel nut 20-G3/4"SN 1070606 Uponor S-Press PLUS adapter swivel nut 25-G3/4"SN 1070607 Uponor S-Press PLUS adapter swivel nut 25-G1"SN 1070608 Uponor S-Press PLUS adapter swivel nut 25-G1 1/4 "SN 1070609 Uponor S-Press PLUS adapter swivel nut 32-G1"SN 1070610 Uponor S-Press PLUS adapter swivel nut 32-G1 1/4"SN 1070611 Uponor S-Press PLUS elbow swivel nut 16-G3/8"SN 1070612 Uponor S-Press PLUS elbow swivel nut 16-G1/2"SN 1105818 Uponor S-Press PLUS elbow swivel nut 16-G 3/4"SN 1070613 Uponor S-Press PLUS elbow swivel nut 20-G1/2"SN 1070819 Uponor S-Press PLUS elbow swivel nut 20-G3/4"SN 1070614 Uponor S-Press PLUS elbow swivel nut 25-G3/4"SN 1070653 Uponor S-Press PLUS tap elbow LWC 16-Rp1/2"FT l=25 1070621 Uponor S-Press PLUS stop end 16 1070622 Uponor S-Press PLUS stop end 20 1070623 Uponor S-Press PLUS stop end 25 1070624 Uponor S-Press PLUS stop end 32 1070638 Uponor S-Press PLUS tap elbow M 16-Rp3/8"FT 1070639 Uponor S-Press PLUS tap elbow M 16-Rp1/2"FT 1070640 Uponor S-Press PLUS tap elbow M 20-Rp1/2"FT 1070641 Uponor S-Press PLUS tap elbow M 20-Rp3/4"FT 1070642 Uponor S-Press PLUS tap elbow M 25-Rp3/4"FT 1070644 Uponor S-Press PLUS tap elbow L 16-Rp1/2"FT 1070645 Uponor S-Press PLUS tap elbow L 20-Rp1/2"FT 1070646 Uponor S-Press PLUS tap elbow XL 16-Rp1/2"FT 1070647 Uponor S-Press PLUS tap elbow XL 20-Rp1/2"FT 1070648 Uponor S-Press PLUS tap elbow twin 90deg long 16-Rp1/2"FT-16 1070649 Uponor S-Press PLUS tap elbow twin 90deg long 20-Rp1/2"FT-20 1070652 Uponor S-Press PLUS adapter wall penetr. 16-G1/2"FT 1070654 Uponor S-Press PLUS tap elbow LWC 16-Rp1/2"FT l=35 1070661 Uponor S-Press PLUS tap elbow mount.Unit 16-Rp1/2"FT c/c80mm 1070662 Uponor S-Press PLUS tap elbow mount.Unit 16-Rp1/2"FT c/c150mm 1070683 Smart Aqua tap elbow mount unit 16-Rp½" FT c/c 35mm 1070684 Smart Aqua tap elbow mount unit 16-Rp½" FT c/c 50mm 1118706 Uponor S-Press PLUS sliding coupling 16-16 1118707 Uponor S-Press PLUS sliding coupling 20-20 1118708 Uponor S-Press PLUS sliding coupling 25-25 1118709 Uponor S-Press PLUS sliding coupling 32-32 1070629 Uponor S-Press PLUS U-tap elbow 16-Rp1/2"FT-16 1070630 Uponor S-Press PLUS U-tap elbow 20-Rp1/2"FT-20 1070631 Uponor S-Press PLUS U-tap elbow 20-Rp1/2"FT-16 1070632 Uponor S-Press PLUS U-tap elbow 16-Rp1/2"FT-20 1070633 Uponor S-Press PLUS U-tap elbow 25-Rp1/2"FT-25 1070634 Uponor S-Press PLUS U-tap elbow 25-Rp1/2"FT-20 1070635 Uponor S-Press PLUS U-tap elbow 20-Rp1/2"FT-25 1070636 Uponor S-Press PLUS U-tap elbow mixer 16-16-R1/2"MT 1070637 Uponor S-Press PLUS U-tap elbow mixer 20-20-R3/4"MT 1070527 Uponor S-Press PLUS bend 16-16 1070528 Uponor S-Press PLUS bend 20-20 1070529 Uponor S-Press PLUS bend 25-25 1070530 Uponor S-Press PLUS bend 32-32 1070655 Uponor S-Press PLUS U-tap elbow LWC 16-Rp1/2"FT-16 l=25 1070656 Uponor S-Press PLUS U-tap elbow LWC 16-Rp1/2"FT-16 l=35 1070615 Uponor S-Press PLUS adapter 16-15CU 1070616 Uponor S-Press PLUS adapter 20-18CU 1070617 Uponor S-Press PLUS adapter 20-22CU 1070618 Uponor S-Press PLUS adapter 25-22CU 1070619 Uponor S-Press PLUS adapter 25-28CU 1070620 Uponor S-Press PLUS adapter 32-28CU 1070705 Uponor S-Press PLUS adapter 16-10CU 1070706 Uponor S-Press PLUS adapter 16-12CU 1070707 Uponor S-Press PLUS adapter 20-15CU 1070650 Uponor S-Press PLUS elbow adapter 16-15CU l=150mm 1070651 Uponor S-Press PLUS elbow adapter 16-12CU l=150mm 1070538 Uponor S-Press PLUS elbow male CU adapt. 16-G3/8"MT/10CU 1060783 Uponor Uni Pipe PLUS white S 16x2,0 3m 1060784 Uponor Uni Pipe PLUS white S 20x2,25 3m 1060785 Uponor Uni Pipe PLUS white S 25x2,5 3m 1060786 Uponor Uni Pipe PLUS white S 32x3,0 3m 1059572 Uponor Uni Pipe PLUS white S 16x2,0 5m 1059573 Uponor Uni Pipe PLUS white S 20x2,25 5m 1059574 Uponor Uni Pipe PLUS white S 25x2,5 5m 1059575 Uponor Uni Pipe PLUS white S 32x3,0 5m 1059576 Uponor Uni Pipe PLUS white 16x2,0 100m 1059577 Uponor Uni Pipe PLUS white 16x2,0 200m 1059578 Uponor Uni Pipe PLUS white 16x2,0 500m 1059579 Uponor Uni Pipe PLUS white 20x2,25 100m 1059581 Uponor Uni Pipe PLUS white 25x2,5 50m 1059583 Uponor Uni Pipe PLUS white 32x3,0 50m 1063059 Uponor Uni Pipe PLUS white in conduit 16x2,0 - 25/20 blue 75m 1063060 Uponor Uni Pipe PLUS white in conduit 20x2,25 - 28/23 blue 75m 1063061 Uponor Uni Pipe PLUS white in conduit 20x2,25 - 28/23 red 75m 1063062 Uponor Uni Pipe PLUS white in conduit 20x2,25 - 28/23 red 75m 1063556 Uponor Uni Pipe PLUS white insulated S6 WLS 035 16x2,0 blue 75m 1063557 Uponor Uni Pipe PLUS white insulated S6 WLS 035 20x2,25 blue 75 m 1063558 Uponor Uni Pipe PLUS white insulated S6 WLS 035 25x2,5 blue 50m 1062181 Uponor Uni Pipe PLUS white insulated S10 WLS 035 16x2,0 blue 75m 1062182 Uponor Uni Pipe PLUS white insulated S10 WLS 035 20x2,25 blue 75m 1062183 Uponor Uni Pipe PLUS white insulated S10 WLS 035 25x2,5 blue 50m 1093952 Uponor MLC pipe insulated S13 BL-S2-D0 16x2 blue 75m 1093954 Uponor MLC pipe insulated S13 BL-S2-D0 20x2,25 blue 75m 1094883 Uponor MLC pipe insulated S13 BL-S2-D0 25x2,5 blue 50m 1093953 Uponor MLC pipe insulated S13 BL-S2-D0 16x2 red 75m 1093955 Uponor MLC pipe insulated S13 BL-S2-D0 20x2,25 red 75m

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company