Water Regulations Approval Scheme Ltd

ALMAR s.r.l Approvals

WRAS Approval Number: #2012303

Range of thermostatic mixing valves incorporating brass bodies (various finishes). Flow is controlled via a detent headworks and depending on model can be either a 2 or 3 headwork option supplying shower or bath outlets. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate a plastic strainer and a single check valve cartridge (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 2010 Shower Valves
Section Subtitle:: Blending, thermostatic.
WRAS Approval Number:: 2012303
Expiry date:: 31/12/2025
Size:: ½” BSP (F) x ½” BSP (F)
Marking:: Almar logo (Almar with triangle above it), made in Italy on face plate.
Installation Requirements:: R001 R010 R040
Model:: E176632.xxxyyzz – 2 way – round trim E176633.xxxyyzz – 3 way – round trim E176672.xxxyyzz – 2 way with fixed rod – square trim E176673.xxxyyzz – 3 way with fixed rod – square trim E176682.xxxyyzz – 2 way – square trim E176683.xxxyyzz – 3 way – square trim Where xxx denotes finish and can be replaced with: 021 – Polished chrome 033 – Raw brass 130 – Matt black 131 – Matt white 275 – Nickel brushed 104 – Brushed brass yy alphanumeric code to indicate each customer individually. zz alphanumeric code to indicate packaging information.
Approval Holder:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company
Manufacturer:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company

WRAS Approval Number: #2210358

Range of shower handsets with plastic bodies (various finishes - see model). The E082051.XXXAWZZ and E082073.XXXAWZZ models incorporate a combined TPE washer and stainless steel strainer on the inlet. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
WRAS Approval Number:: 2210358
Expiry date:: 31/10/2027
Note:: Open outlet use only.
Size:: ½” BSP (M)
Marking:: Almar Logo on body.
Installation Requirements:: R001 R040
Model:: E082027.XXXAWZZ Emotion Ø100 hand shower single jet, E082043.XXXAWZZ Emotion Ø130 hand shower single jet, E082051.XXXAWZZ Emotion Ø100 hand shower multi jet, E082073.XXXAWZZ Emotion Ø130 hand shower multi jet. XXX can be replaced by the following to denote finish: 002 - Chrome, 011 - Chrome/Black, 116 - Chrome/White, 136 - Black painted, 141 - White painted, 245 - PVD Gold, 246 - PVD Stainless Steel, 277 - Nickel brushed, 284 - PVD Copper brushed, 285 - PVD High Brass Brushed, 286 - PVD Gune Metal Brushed. ZZ is replaced with alphanumeric characters to denote packing information.
Approval Holder:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company
Manufacturer:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company

WRAS Approval Number: #2311362

Range of overhead shower outlets, (chrome plated ABS bodies). The inlets incorporate a plastic flow regulator. Maximum operating temperature 65°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2311362
Expiry date:: 30/11/2028
Size:: ½ BSP (F)
Marking:: Almar logo on body
Installation Requirements:: R001 R040
Model:: Round Emotion Shower Head D200 – D300 E044075 E044076 E044210 E044049 E044050 E044252 E044040 E044044 E044072 Square Emotion Shower Head D200 – D300 E044077 E044078 E044209 E044220 E044229 E044234 E044039 E044043 E044069
Approval Holder:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company
Manufacturer:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company

WRAS Approval Number: #2312323

Range of plastic shower handsets available in various finishes. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
WRAS Approval Number:: 2312323
Expiry date:: 31/12/2028
Note:: Open Outlet use only.
Size:: ½” BSP (M).
Marking:: Laser marking, Almar, MADE IN ITALLY.
Installation Requirements:: R001 R040
Model:: E082019.XXXYYZZ, E082050.XXXYYZZ, E082070.XXXYYZZ, E082094.XXXYYZZ. Where: XXX denotes finish and can be replaced by: 002 - Chrome. 136 - White painted. 141 - Black plainted. 245 - PVD Gold. 246 - PVD Stainless steel. 277 - Nickel nrushed. 284 - PVD Copper brushed. 285 - PVD High brass brushed. 286 - PVD Gun metal brushed. YY is replaced by an alphanumeric code to denote customer. ZZ is replaced by an alphanumeric code to denote packaging information.
Approval Holder:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company
Manufacturer:: ALMAR s.r.l

Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
General Email
info@almarmadeinitaly.it

View All Listings by this Company