'RADILON® DT RV300RKC2 205 WT'. White coloured, injection moulded, glass filled Polyamide 612 material. For use with water up to 85°C.
'DF1212'. White coloured, extruded PTFE tape. For use with water up to 85°C.
'Weld-On 705 ECO Gray PVC Solvent Cement'. Grey coloured solvent cement. Apply as per manufacturer's data sheet '705 ECO-09-2024'. Cure for 12 hours at 5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use only
BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.
Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.
BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SH001* | Various | ½” BSP (F) conical nut x ½” BSP(F) conical nut | For open outlet use only bar | 85 °C | WINSDRUM | On conical nut | No | Not applicable | Not Applicable | Not Applicable | |
| SH002* | Various | ½” BSP (F) conical nut x M15x1 | For open outlet use only bar | 85 °C | WINSDRUM | On conical nut | No | Not applicable | Not Applicable | Not Applicable |
1) The products are interlock type 2) * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AQRNDCV2 | Chrome | 5 bar | 80 °C | AQUALISA | shower valve | No | Ceramic cartridge | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, |
AQRNDCV2 Packed Products. Waterway contents are: SDCV.002 (Valve) 704418 (handset) ACY1008(hose) ACY1013(wall outlet) ACY1002(fixed arm) 704426(top shower)
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 35H-5 | 35mm | 10 bar | 85 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge | ||||
| 35H-F | 35mm | 10 bar | 65 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge | ||||
| 35P-1 | 35mm | 10 bar | 85 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge | ||||
| 35PH-1 | 35mm | 10 bar | 85 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge | ||||
| 40D-5 | 40mm | 10 bar | 85 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge | ||||
| 40D-F | 40mm | 10 bar | 65 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge | ||||
| 40H-5 | 40mm | 10 bar | 85 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge | ||||
| 40H-F | 40mm | 10 bar | 65 °C | company name (WANHAI), WRAS，model and date of manufacture (DD/MM/YYYY) | on body | No | Ceramic cartridge |
Model D25-2 and D39 are diverter with open/close function
Range of quarter turn ceramic disc headworks incorporating brass bodies (HW-12, HW -34, HW - 38) or plastic body (HP-12). Maximum working pressure 12 Bar. Maximum operating temperature 85°C.
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) with a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The pull-out spray hose connector incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 71 550 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 551 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 557 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 558 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | |||
| 71 559 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | |||
| 71 560 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 561 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 580 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | |||
| 71 584 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 585 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 589 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Click Type | ||
| 71 593 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 594 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Pop Up | ||
| 71 598 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Click Type | ||
| 71 526 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | |||
| 71 527 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | |||
| 71 528 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | |||
| 71 529 xx0 | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator |
Where xx0 denotes the surface finish. It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 003 xx0 | Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish | G 3/8 | 10 bar | 60 °C | AXOR | on the body | Yes | Ceramic cartridge | Metal Backnuts | Aerator | ||
| 10 001 xx0 | Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish | G 3/8 | 10 bar | 60 °C | AXOR | on the body | Yes | Ceramic cartridge | Metal Backnuts | Aerator | Pop Up | |
| 10 007 xx0 | Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish | G 3/8 | 10 bar | 60 °C | AXOR | on the body | Yes | Ceramic cartridge | Metal Backnuts | Aerator | Pop Up | |
| 10 102 xx0 | Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish | G 3/8 | 10 bar | 60 °C | AXOR | on the body | Yes | Ceramic cartridge | Metal Backnuts | Aerator | Pop Up | |
| 10 103 xx0 | Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish | G 3/8 | 10 bar | 60 °C | AXOR | on the body | Yes | Ceramic cartridge | Metal Backnuts | Aerator |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 681104 | chrome | ½” BSP (F) | 5 bar | 60 °C | KINEN | On handle | No | Ceramic Cartridge | C-plate | Aerator | |
| 681101 | chrome | ½” BSP (F) | 5 bar | 60 °C | KINEN | On handle | No | Ceramic Cartridge | C-plate | Aerator | |
| 691104 | chrome | ½” BSP (F) | 5 bar | 60 °C | KINEN | On handle | No | Ceramic Cartridge | C-plate | Aerator | |
| 691101 | chrome | ½” BSP (F) | 5 bar | 60 °C | KINEN | On handle | No | Ceramic Cartridge | C-plate | Aerator | |
| 891105-1 | chrome | ½” BSP (F) | 5 bar | 60 °C | KINEN | On handle | No | Ceramic Cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 71 052 xx0 | various | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | ||
| 71 051 xx0 | various | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Click Type | |
| 71 053 xx0 | various | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | ||
| 71 054 xx0 | various | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Click Type | |
| 71 055 xx0 | various | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 32002 | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 60℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | Aerator | |
| 41202 | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 60℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | Aerator | |
| 41802 | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 60℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | Aerator | |
| 41802L | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 60℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | Aerator | |
| 81202 | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 85℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | ||
| 81202L | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 85℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | ||
| 81402 | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 85℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | ||
| 81402L | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 85℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate | ||
| 91202 | chromium plated | ½” BSF (F) Captive nut | 10bar bar | 85℃ °C | Bokeya | on body | No | Ceramic cartridge | C-plate |
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The tap also incorporates a quarter turn ceramic disc headwork with a dome type operating member controlling the filtered water outlet. The spout outlet incorporates a plastic combination aerator (63868-00X, 63868-01X) and 2 separate plastic aerators for the hot & cold outlet or filtered outlet (63869-00X, 63869-01X). Maximum working pressure: 5.0 bar Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SL-KT053 | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SL-KT014 | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SL-KT015 | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SL-KT004 | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | Non-rising spindle | C-plate | Aerator | |
| SL-KT40602R | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SL-KT032 | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Side of body | No | Ceramic cartridge | C-plate | Aerator | |
| SL-KT054 | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SL-KT30602W | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SL-KT40202L | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company Logo | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener |
Various finish: (1)Without suffix to current model number:Chrome plated (2)With suffix B:Black (3)With suffix BB:Brushed brass
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 519413 - MILI RH HP CHR | Chrome | 3/8” | 5 bar | 60 °C | BLANCO | Body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 517742 - MIDA RH HP CHR | Chrome | 3/8" | 5 bar | 60 °C | BLANCO | Body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 528156 - MIDA ECO RH HP BL | Black matt | 3/8” | 5 bar | 60 °C | BLANCO | Body | Yes | Ceramic cartridge | Not Applicable | Aerator | Flow Regulator Fitted, |
| 519414 - MILA RH HP CHR | Chrome | 3/8” | 5 bar | 60 °C | BLANCO | Body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 526657 - MILA RH HP BL | Black matt | 3/8” | 5 bar | 60 °C | BLANCO | Body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 528154 - MILA ECO EH HP CHR | Chrome | 3/8” | 5 bar | 60 °C | BLANCO | Body | Yes | Ceramic cartridge | Not Applicable | Aerator | Flow Regulator Fitted, |
| 528155 - MILA ECO EH HP BL | Black | 3/8” | 5 bar | 60 °C | BLANCO | Body | Yes | Ceramic cartridge | Not Applicable | Aerator | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| K006* | Various | ½" captive nut | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| B006* | Various | ½" captive nut | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| B007* | Various | ½" captive nut | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| K012* | Various | ½" captive nut | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| K013* | Various | ½" captive nut | 5 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | Not Applicable | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SL-KT40602W | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company LOGO | Rear of body | No | 1/4 Turn ceramic disk | C-plate | Flow Straightener | |
| SL-KT40502W | Various | 1/2" BSP (F) | 10 bar | 60 °C | Company LOGO | Rear of body | No | Non-rising spindle | C-plate | Flow Straightener |
Various finish: (1)Without suffix to current model number:Chrome plated (2)With suffix B:Black (3)With suffix BB:Brushed brass
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SJS-WB102* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| SJS-WB202* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB742* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB793* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB793-1* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB703-1* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Body | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB703-2* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Body | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB703* ** | Various | BSP 1/2" (F) | 10 bar | 60 °C | Kind | Body | No | Ceramic cartridge | Not Applicable | Aerator |
The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
Range of three-hole, metal, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). Incorporating quarter turn ceramic disc headworks with lever type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TS231** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Spout and handle | No | Not applicable | Not Applicable | Aerator | |
| TS232** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Spout and handle | No | Not applicable | Not Applicable | Aerator |
** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
‘EPS50’ range of stainless-steel axial compensators with threaded end connections and ‘EPSF-10’ range of stainless-steel expansion joints with rotatable flanged end connections. Maximum working pressure: 16bar. Maximum operating temperature: 100°C.
Fastwarm range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C
Range of ‘PPS/GF BFS (black)’ shrink back fittings for use with ‘Uponor Combi pipe’ (PEX/EVOH/PEX). Maximum operating pressures 12 bar & 6 bar, with maximum operating temperatures 20°C & 95°C respectively.
'Instantor’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Instantor’ stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
Range of polypropylene push-fit fittings. The 20, 25 and 32mm sizes are for use with MDPE Pipe (manufactured to BS EN 12201-2). The 15, 22 and 28mm connections are for use with the following pipes: PEX (manufactured to BS 7291-3) for 15, 22 and 28mm sizes. PB (manufactured to BS 7291-2) and Copper (manufactured to BS EN 1057) for 15 and 22mm sizes only. Maximum working pressures: UG601B model: 16.0 bar. All other models: 12.5 bar. Cold water use only.
Range of brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
“>B<Press NZ” range of press fittings incorporating copper (EN12165 CW024A) or copper alloy (CC499K-DW) bodies. For use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of copper press fittings (‘M’ type crimp profile) and brass threaded adaptor fittings, for use with copper pipe (manufactured to EN1057). Maximum working pressure and operating temperatures: 16.0 bar @ 30°C and 10.0 bar @ 95°C.
Range of water meter measuring capsules with brass bodies. Maximum working pressure 16.0 bar. Please refer to model for maximum operating temperature.
Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.
Range of water meter manifolds with plastic bodies, for use with MDPE pipe to BS EN 12201 pipe (for the push-fit models). The inlets incorporate a spherical valve and a non-return valve (not suitable for back flow protection). Maximum operating pressure 12.5 bar. Maximum operating temperature 23°C
‘Hansen True Fit’ range of black coloured, plastic threaded fittings. Maximum working pressure 1/8” – 2” BSP: 16.0bar, 2½” BSP: 12.0bar, 3” – 4”: 10.0bar. Cold water and above ground use only.
Range of in-line flow sensors incorporating either brass (type 230, 235 & 236) or plastic (type 200 & 210) bodies & EPDM ‘O’-rings. Maximum working pressure 12.0 Bar Maximum operating temperature 100.0°C
Range of stainless steel bodied mechanical pump shaft seals. Cold water use only.
Range of multistage pumps with stainless steel bodies Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.
Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 51OH-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 52CS-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 52DS-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 52OH-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 53OS-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 62OS-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 62OH-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 6301-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 6302-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 6303-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 63OH-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 6300-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 42OS-** | Various | G3/8(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 42OH-** | Various | G3/8(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator | ||
| 53OH-** | Various | G1/2(M) | open outlet bar | 65 °C | KAIPING BOYU | BODY | No | Not applicable | Aerator |
** Representative all models are available with the following finish code: CP-Polished Chrome BN-Brushed Nickel MB-Matte Black ORB-Oil Rubber Bronze PB-Polished Brass WP-Weathered Pewter BB-Brushed Brass
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S015* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S016* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S017* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S018* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S019* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S020* | Various | 1/2" BSP (M) | For open outlet use only bar | 75 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S021* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S022* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 13.20205.G15.CP03-8510 | Chromed | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | ||||
| 13.20205.G15.CP5R-8510 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20205.G15.CP5R-8511 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, CR, size, production date (MM-YY) | Body | No | |||||
| 13.20205.G20.CP03-8510 | Chromed | BSP 3/4" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | ||||
| 13.20205.G20.CP5R-8510 | BSP 3/4" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20205.G20.CP5R-8511 | BSP 3/4" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, CR, size, production date (MM-YY) | Body | No | |||||
| 13.20245.A15.CP5R-8510 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20245.A20.CP5R-8510 | BSP 3/4" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20255.G15.CP03-8510 | Chromed | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | ||||
| 13.20255.G15.CP5R-8510 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20255.G15.CP5R-8511 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, CR, size, production date (MM-YY) | Body | No | |||||
| 13.20275.G15.CP5R-8510 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20305.G15.CP03-8510 | Chromed | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | ||||
| 13.20305.G15.CP5R-8510 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20305.G15.CP5R-8511 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, CR, size, production date (MM-YY) | Body | No | |||||
| 13.20305.G20.CP03-8510 | Chromed | BSP 3/4" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | ||||
| 13.20305.G20.CP5R-8510 | BSP 3/4" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20305.G20.CP5R-8511 | BSP 3/4" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, CR, size, production date (MM-YY) | Body | No | |||||
| 13.20365.G15.CP03-8510 | Chromed | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | ||||
| 13.20365.G15.CP5R-8510 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, size, production date (MM-YY) | Body | No | |||||
| 13.20365.G15.CP5R-8511 | BSP 1/2" (M) | 16 bar | 85 °C | Company logo (V&G), WRAS, CR, size, production date (MM-YY) | Body | No |
Range of self-closing taps (chromium plated brass) incorporating a push button headwork with a dome type operating member. The inlet hoses each incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C.
Range of self-closing taps (chromium plated brass) with a dome type operating member. The spout outlet incorporates a plastic aerator. Model 02 122 06 99 model is supplied with a metal backnut. Maximum working pressure 10 bar. Maximum operating temperature 65C
‘TAQ PEX’ range of PEX lined flexible hose assemblies with either stainless steel braiding or grey polymeric (PET - Polyethylene terephthalate) braiding. G3/8" captive nut connection includes an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Hoses with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel, interlocked shower hoses with EPDM liner and O-rings. Open outlet use only. Maximum operating temperature 65°C.
Page 45 of 50
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
