Norcros Group (Holdings) Limited T/A Abode Approvals


WRAS Approval Number: 1703085

Range of in-line replacement water filter cartridges (plastic bodies). Maximum working pressure: 8.6 Bar. Cold water use only.

  • Section: 1055 Filter Cartridges
  • WRAS Approval Number: 1703085
  • Expiry date: 31/03/2022
  • Size: ¼” Pushfit
  • Marking: Model, WRAS, Flow arrow and technical information on adhesive label on body.
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    PT1204, RE1003 & HK1077
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703092

Range of in-line replacement water filter cartridges (plastic bodies). Maximum working pressure: 8.6 Bar. Cold water use only.

  • Section: 1055 Filter Cartridges
  • WRAS Approval Number: 1703092
  • Expiry date: 31/03/2022
  • Size: ¼” Pushfit
  • Marking: Montpellier, WRAS logo & technical information on label on body
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    MP1001 MONTPELLIER & MP1003 MONTPELLIER
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710366

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710366
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided, EPDM lined hose assembly with ½” captive nut end connection.
  • Marking: SMR on underside of operating member.
  • Installation Requirements R001 R006 R010
  • Model
    Linear
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: San Marco Rubinetteria Srl
    Company Name
    San Marco Rubinetteria Srl
    Address
    Via Carducci 10 13867 Pray Biellese (Biella)
    Phone
    +39 15765 5244
    General Email
    info@sanmarcotaps.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710324

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator and is also available with an optional flow regulator. The inlet hoses also incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2) & stainless steel strainers. Maximum working pressure 5.5 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710324
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” BSP (M) threaded end connections.
  • Marking: SMR on operating member.
  • Installation Requirements R001 R006
  • Model
    Althia single lever (Quad) Althia single lever (Round)
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: San Marco Rubinetteria Srl
    Company Name
    San Marco Rubinetteria Srl
    Address
    Via Carducci 10 13867 Pray Biellese (Biella)
    Phone
    +39 15765 5244
    General Email
    info@sanmarcotaps.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611377

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a self-closing mechanism. The spout outlet incorporates a plastic flow straightener. The product is intended for dispensing instantaneous filtered hot water. Maximum working pressure 5.0 bar. Maximum operating temperature 98°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1611377
  • Expiry date: 30/11/2021
  • Note: This approval does not include the instantaneous filtered hot water heater.
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with 3/8” captive nut end connections, (main inlet to tap and to instantaneous wáter heater). Stainless steel braided silicone lined flexible hose assemblies with 3/8” captive nut end connections, (connection from instantaneous hot wáter heater to tap).
  • Marking: SMR & SMR logo on body
  • Installation Requirements R001 R006
  • Model
    Onestream Prouno Dispenser
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: San Marco Rubinetteria Srl
    Company Name
    San Marco Rubinetteria Srl
    Address
    Via Carducci 10 13867 Pray Biellese (Biella)
    Phone
    +39 15765 5244
    General Email
    info@sanmarcotaps.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711325

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass)., incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The cold water inlet hose incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711325
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut (hot) and ½” BSP (F) (cold) end connections.
  • Marking: SMR on operating member
  • Installation Requirements R001 R006 R010
  • Model
    ACT3010, Single lever quad spout & Alvo - quad Spout
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: SAN MARCO Rubinetteria s.r.l.
    Company Name
    SAN MARCO Rubinetteria s.r.l.
    Address
    Via Carducci 10 13867 Pray (BI) Italy
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703097

Range of in-line replacement water filter cartridges (plastic bodies). Maximum working pressure: 8.6 Bar. Cold water use only.

  • Section: 1055 Filter Cartridges
  • WRAS Approval Number: 1703097
  • Expiry date: 31/03/2022
  • Size: ¼” Pushfit
  • Marking: Model and technical information on adhesive label on body
  • Installation Requirements R001 R008 R120 R150 R170
  • Model
    12” x 2.5” In-line water filter: SWITCH RESIN & GAC AND SWITCH GAC
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806348

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1806348
  • Expiry date: 30/06/2023
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: SMR on base plate
  • Installation Requirements R001
  • Model
    Upton
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: SAN MARCO Rubinetteria s.r.l.
    Company Name
    SAN MARCO Rubinetteria s.r.l.
    Address
    Via Carducci 10 13867 Pray (BI) Italy
    General Email
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806342

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass, incorporating quarter turn ceramic disc headworks and single lever operating members. The pull-down spray outlet incorporates a plastic aerator. Both inlets and the connection to pull-down spray hose incorporate single check valve cartridges (that have not been fully verified by test to demonstrate that they provide adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1806342
  • Expiry date: 30/06/2023
  • Note: IRN R090 applies to the product unless otherwise agreed by the Water Supplier in the area of installation.
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: SMR logo and Abode on handle
  • Installation Requirements R001 R010 R090
  • Model
    Genio Pull Out
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: San Marco Rubinetteria Srl
    Company Name
    San Marco Rubinetteria Srl
    Address
    Via Carducci 10 13867 Pray Biellese (Biella)
    Phone
    +39 15765 5244
    General Email
    info@sanmarcotaps.com
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807354

Single hole, single outlet (swivel) combination tap assembly (brass body with brushed steel effect finish) incorporating a ceramic cartridge headwork with a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1807354
  • Expiry date: 31/07/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (M) end connections.
  • Marking: SMR logo on rear of operating member. Abode on top of operating member.
  • Installation Requirements R001 R006 r010
  • Model
    Prime
  • Factor: Norcros Group (Holdings) Limited T/A Abode
    Company Name
    Norcros Group (Holdings) Limited T/A Abode
    Address
    Unit L Zenith Park Whailey Road
    Postcode
    S75 1HT
    General Email
    pillingworth@abodedesigns.co.uk
    View All Listings by this Company
  • Manufacturer: SAN MARCO Rubinetteria s.r.l.
    Company Name
    SAN MARCO Rubinetteria s.r.l.
    Address
    Via Carducci 10 13867 Pray (BI) Italy
    General Email
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5