Range of single hole, double outlet (fixed) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied). All models incorporate a separate vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature 98°C. Hot-water circuit has a maximum operating temperature of 65°C.
Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.
Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only
Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.
Range of in-line, non-verifiable single check valve assemblies with DZR brass bodies and spring loaded, resilient trim check valve cartridges. For use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.
Range of single check valve assemblies consisting of a single check valve cartridge housed within a DZR brass body. Compression connections on for use with popper pipe to BS EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 65°C.
Floguard range of in-line non-verifiable double check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass body (FLOW230002 model is nickel plated). Compression models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 Bar Maximum operating temperature: 65°C
Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 812003A | 23.8mm | 10 bar | 85 °C | GAOAO | Body | No | 1/4 Turn ceramic disk | Not Applicable | |||
| 812038A | 23.5mm | 10 bar | 85 °C | GAOAO | Body | No | 1/2 Turn ceramic disk | Not Applicable | |||
| 812049A | 19mm | 10 bar | 85 °C | GAOAO | Body | No | 1/2 Turn ceramic disk | Not Applicable | |||
| 812056 | 18.3mm | 10 bar | 85 °C | GAOAO | Body | No | 1/4 Turn ceramic disk | Not Applicable | |||
| 812057 | 19.0mm | 10 bar | 85 °C | GAOAO | Body | No | 1/4 Turn ceramic disk | Not Applicable | |||
| 812072 | 24.3mm | 10 bar | 85 °C | GAOAO | Body | No | 1/4 Turn ceramic disk | Not Applicable | |||
| 812073 | 24.3mm | 10 bar | 85 °C | GAOAO | Body | No | 1/4 Turn ceramic disk | Not Applicable | |||
| 812114 | 18.5mm | 10 bar | 85 °C | GAOAO | Body | No | 1/2 Turn ceramic disk | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 30D-9 | 29.91mm | 10 bar | 85 °C | WANHAI, WRAS, 30D-9, Production date (DD/MM/YYYY) | Body | No |
Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various styles and finishes) incorporating ceramic cartridge headworks, and single lever operating members. The spout outlets incorporate a plastic or metal aerator. The products are supplied with click type pop-up wastes (not verified by test). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EC SNK EF C | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| EC SNK EF BB | Brushed Brass | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| EC SNK EF BLK | Black | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| EC SNK EF BN | Brush Nickel | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| EC SNK EF GM | Gun Metal | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| BQSOL EFSNK C | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| RP3 EC SNK EF C | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| RP3 EC SNK EF BB | Brushed Brass | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| RP3 EC SNK EF GM | Gun Metal | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 4648G | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 288489 | Black | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 288491 | Gun Metal | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 311098 | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 3311102 | Brushed Brass | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 311106 | Brush Nickel | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 311162 | Black | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| MZ SNK EF C | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| MZ SNK EF BB | Brushed Brass | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| MZ SNK EF BLK | Black | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| MZ SNK EF BN | Brush Nickel | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| MZ SNK EF GM | Gun Metal | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| BQMEN EFSNK BN | Brush Nickel | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| RP3 MZ SNK EF C | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| RP3 MZ SNK EF BB | Brushed Brass | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| RP3 MZ SNK EF GM | Gun Metal | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 9087G | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 288493 | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 288503 | Brush Nickel | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 311105 | Black | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 311114 | Brushed Brass | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 311125 | Gun Metal | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| 311164 | Chrome | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | ||
| RP3 EC SNK EF BLK | Black | ½” captive nut end connections. | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disc | C-plate |
Model added February 2026: RP3 EC SNK EF BLK
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QST SNK EF C | Chrome | ½” captive nut end connections. | 5.0 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disk | C-plate | Flow Straightener | |
| DUL SNK EF C | Chrome | ½” captive nut end connections. | 5.0 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disk | C-plate | Flow Straightener | |
| RP3 DUL SNK EF C | Chrome | ½” captive nut end connections. | 5.0 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disc | C-plate | Flow Straightener |
Model added February 2026: RP3 DUL SNK EF C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 34 113 xx0 | Various | basic set G 1/2 | 10 bar | 70 °C | AXOR | On Spout | Yes | Ceramic cartridge | Aerator | ||
| 34 115 xx0 | Various | basic set G 1/2 | 10 bar | 70 °C | AXOR | On Spout | Yes | Ceramic cartridge | Aerator | ||
| 34 112 xx0 | Various | basic set G 1/2 | 10 bar | 70 °C | AXOR | On Spout | Yes | Ceramic cartridge | Aerator | ||
| 34 116 xx0 | Various | basic set G 1/2 | 10 bar | 70 °C | AXOR | On Spout | Yes | Ceramic cartridge | Aerator |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Products to be installed in combination with 13623180 Basic set, which does not form part of this approval.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AL 2TH WMBAS C | Chrome | 15mm compression | 5 bar | 65 °C | Bristan | Handle | No | Ceramic cartridge | Not Applicable | Aerator | Flow Regulator Fitted, |
| AL 2TH WMBAS BLK | Black | 15mm compression | 5 bar | 65 °C | Bristan | Handle | No | Ceramic cartridge | Not Applicable | Aerator | Flow Regulator Fitted, |
| AL 2TH WMBAS BB | Brushed Brass | 15mm compression | 5 bar | 65 °C | Bristan | Handle | No | Ceramic cartridge | Not Applicable | Aerator | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AR2 THLBSM C | Chrome | 3/4" BSP (M) | 10 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| AR2 THBSM C | Chrome | 3/4" BSP (M) | 10 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| BRT AR2 THBSM C | Chrome | 3/4" BSP (M) | 10 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| CN AR2 THBSM C | Chrome | 3/4" BSP (M) | 10 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| RP3 AR2 THBSM C | Chrome | 3/4" BSP (M) | 10 bar | 60 °C | Bristan | Body | No | 1/2 Turn ceramic disc | Metal Backnuts | Flow Straightener |
Model added February 2026: RP3 AR2 THBSM C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IRS BSM C | Chrome | 3/4" BSP (M) | 5.0 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | Shower Hose, Handset, |
| OPS BSM C | Chrome | 3/4" BSP (M) | 5.0 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | Shower Hose, Handset, |
Range of deck mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), and incorporating a quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. Maximum temperature 60 degrees Maximum pressure 5 bar.
Range of three hole, wall mounted, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model) comprising of a spout outlet, a clipsed extension set for accommodating headworks and a trim set with various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Hyddro Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Hyddro stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of Hyddro press fittings incorporating EPDM ‘O’-rings. For use with Hyddro (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C
Range of M profile copper press fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C
N·U Range of stainless steel (304S31/316S11) press fittings for use with N·U series 1 & 2 stainless steel (304S31/316S11) pipe. The fittings and tube are assembled using a crimping tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of stainless-steel(SS304L) press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
‘ISR’ range of copper, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. (Products YP62, YP63, YP63L, YP64, YP68, YP68FF, YP69, YP69F & YP69P Maximum working pressure - 16 bar Maximum operating temperature - 65C All other fittings Maximum working pressure - 16 Bar Maximum operating temperature - 95°C.
‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of compression fittings incorporating polypropylene bodies, plastic pipe liners, plastic grip rings and EPDM seals. For use with PE100 pipe manufactured to BS EN 12201. Maximum working pressure: 16Bar. Maximum operating temperature: 23°C
Range of Victaulic rigid couplings (905, H10, H11, H20, H50) for use with plain end HDPE pipe (EN 12201-2), and for product 907, for use with EN 12201-2 HDPE and EN 10217-1 steel pipe. For above and below ground use. Maximum working pressure: SDR7.4 25bar, SDR11 16bar or SDR17 10bar. Maximum operating temperature: Cold water use only.
Range of polypropylene push-fit fittings and inserts for use with PE80 MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.
Range of metric and imperial PVC-U Solvent cement or Threaded fittings for use with PVC-U pressure pipe Class E manufacture to BS EN 1452 Maximum working pressure; 16 Bar Maximum operating temperature; Cold water only
Range of WC dual flush drop valves with ABS bodies and silicon seals. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal, adjustable height overflow.
Range of heat interface units providing heating and instantaneous hot water. The central heating and hot water are generated via plate heat exchangers. The central heating circuit contains a pressure relief valve (3.0 bar) and an expansion vessel. The cold inlet supply to the plate heat exchanger incorporates an in line single check valve assembly, (suitable for backflow protection against Fluid Category 2). Max Temperature & Pressure for models A/7892284 & B/7892283: Primary Circuit: 6.0 bar at 90°C DHW Circuit: 10.0 bar at 55°C Secondary Circuit 6.0 bar at 90°C Max Temperature & Pressure for all other models: Primary Circuit: 16.0 bar at 90*C, DHW Circuit: 10.0 bar at 65*C, Secondary Circuit 3 bar at 85*C.
Mini expansion vessels/shock arrestor with a stainless-steel body and butyl rubber diaphragm. Maximum working pressure 10.0 bar. Cold water use only.
Shock arrestors with a copper body, plastic shuttle and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The DPV(M/S) models and DPV(S) models can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: DPV models 10.0 bar, DPVM models with an oval flange or VME models with integral check valve 16.0 bar, All other DPVM models 25.0 bar. DPV(S) models with an oval flange or DPV(S)(E) models with integral check valve 16.0 bar, All other DPV(S) models and DPH(S)I models 25.0 bar. Maximum operating temperatures: DPHM, DPVE and DPVME models with integral check valve 60°C, all other model variants 100°C.
Range of (chrome plated) plastic shower handsets with flexible shower hose and stainless-steel braided connection hose. The inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only.
Range of draining taps, straight or elbowed with brass bodies incorporating a rising spindle headwork. Maximum working pressure 10.0 Bar Maximum operating temperature 95.0°C
Range of wall mounted self-closing pillar taps (chromium plated brass), incorporating a spring-loaded headwork with a dome type operating member. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts. Maximum operating pressure 10 bar. Maximum operating temperature 65°C
Range of air venting valves with brass bodies. The P0508.015 compression model is for use with copper pipe (manufacturer to EN 1057) Maximum working pressure: 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed, manually operated blending valves with (brass bodies - various finishes), incorporating ceramic cartridge or quarter turn ceramic disc headworks and single lever or dome type operating members. Maximum working pressure 5.0 Bar Maximum operating temperature 70 °C.
Range of wall mounted bar type thermostatic shower valves (chrome plated brass bodies) incorporating ceramic disc headwork which controls the flow with cubed type operating members. Temperature is controlled independently via a thermostatic cartridge with cubed type operating member that incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E80018 | Chrome | 15mm | 5 bar | 60 °C | ESTEEM | Handle | No | Non-rising spindle | Not Applicable | Not Applicable | Shower Hose, Handset, Riser Rail, |
Range of combined temperature and pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm. Valves incorporate a manually operated rotational easing gear. The valves are pre-set at 6.0 or 7.0 bar (see models). Compression connections are for use with copper pipes (manufactured to EN 1057). Maximum operating temperature 90°C.
Range of combined temperature and relief valves incorporating DZR brass bodies and PTFE washers. Valves incorporate a manually operated rotational easing gear and can be supplied pre-set at 6.0 bar, 7.0 bar, 8.0 bar or 10.0 bar. Compression outlet connections are for use with copper pipe (manufactured to EN1057, R250). Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of angle valves (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork with single lever operating members. Maximum working pressure 5.0 Bar, Maximum operating temperature 60.0°C
Range of spring loaded, non-return valves with ductile iron bodies (blue epoxy powder coated) with stainless steel discs, springs and shafts and EPDM seat. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Non-metallic materials and components comply with BS6920 at 85°C
UNIWAT 5107Range of swing gate, non-return valves with blue epoxy coated ductile iron bodies and EPDM swing gates. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of normally open (L282 prefix models), normally closed (L182 models) or latching (61 suffix models) solenoid valves with either brass, nickel plated brass or stainless-steel bodies and an EPDM diaphragm. Please refer to model for maximum working pressure. Maximum operating temperature 85.0°C
Solenoid valve with a plastic body, incorporating an EPDM diaphram and EPDM sealing rings. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.
Range of angled spherical valves with (brass bodies - various finishes), PTFE seats and NBR seals. Model Art. 1251 incorporates a stainless-steel filter. Maximum working pressure 10.0, 35.0 or 55.0 Bar (see models) Maximum operating temperature 90.0°C (Art. 1251 Cold water only)
Page 40 of 50
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
