Range of EPDM expansion joints. Maximum working pressures: YXY6: 6.0 bar, YXY10: 10.0 bar, YXY16: 16.0 bar, YXY25: 25.0 bar. Maximum operating temperature 85°C.
Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.
Range of multistage pumps with stainless steel bodies Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 37902W-MB5 | BLACK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-MG5 | GREEN | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-GB5 | BLUE | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-CS5 | GREY | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-BP5 | PINK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37903W-MB5 | BLACK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-MG5 | GREEN | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-GB5 | BLUE | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-CS5 | GREY | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-BP5 | PINK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| WJ V/HANDLE CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 931 IX | STAINLESS STEEL | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 23931 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 27931 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 28931 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 21931 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 649510 CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 639510 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 679510 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 689510 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 619510 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH G | POLISHED GOLD | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH NK | NICKEL | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 15930 CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 23930 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 27930 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 28930 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 21930 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No |
Range of drain cock elbows incorporating a DZR brass body, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures:16.0 bar. Maximum operating temperature 85°C.
Range of ‘THINK-A-FLEX’, EPDM lined, stainless steel braided flexible hose assemblies incorporating various end connections Maximum working pressure: 10 BAR Maximum operating temperature: 65°C
Range of stainless steel braided silicone lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.
Range of single or double tank water heaters, incorporating enamel coated carbon steel tank. The secondary circuit is factory fitted with a temperature and pressure relief valve (10.0 Bar). Maximum working pressure 8 bar. Maximum operating temperature 75 °C.
Range of 2, 3 and 4 port manifold assemblies with either DRZ brass (3834.1, 3834.34, 3835.34, 3835.1, 3837.37 & 3837.1) or brushed chrome plated brass bodies incorporating screw down isolation valves with dome type operating members at each of the outlets. Maximum working pressure: 16 Bar. Maximum operating temperature: 95°C.
Range of concealed, wall mounted thermostatic shower valves with brass bodies (chromium plated trim sets). The products incorporate a one or two-way function and a thermostatic cartridge controlling the temperature with lever type operating members. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 10 bar. Maximum operating temperature 60°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SD-ZJXXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD124-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD205-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD127-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD170-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD190-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD246-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD191-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD109-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD207-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD101-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD116-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD117-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD125-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD128-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD156-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD168-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD209-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD210-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD212-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD213-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD220-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD222-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD236-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD238-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD240-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc |
XXXX represent five series shower valves and can be replaced to 2500, 2501, 2503, 2504, 2702.
2101 Range of butterfly valves with blue epoxy coated ductile iron bodies, stainless-steel discs and PTFE seats. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of lugged, wafer or double flanged butterfly valves incorporating blue epoxy coated ductile iron bodies, EPDM seats and stainless steel or blue epoxy coated ductile iron discs. The products can be supplied with a gear box and handheel operating member (all models) or a lever operating members (all models except TB-RF). Maximum working pressure 10.0 bar, 16.0 bar or 25.0 bar (see model). Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D22P-1D | 22mm | 16 bar | 85 °C | MS, D22-1D | Body | No | |||||
| D26P-3 | 26mm | 16 bar | 85 °C | MS, D26P-3 | Body | No | |||||
| D26P-3B | 26mm | 16 bar | 85 °C | MS, D26P-3B | Body | No | |||||
| D26P-3FY | 26mm | 16 bar | 85 °C | MS, D26P-3FY | Body | No | |||||
| D28P-3B2 | 28mm | 16 bar | 85 °C | MS, D28P-3B2 | Body | No | |||||
| D28P-3B3 | 28mm | 16 bar | 85 °C | MS, D28P-3B3 | Body | No | |||||
| D28P-3D2 | 28mm | 16 bar | 85 °C | MS, D28P-3D2 | Body | No | |||||
| D28P-6 | 28mm | 16 bar | 85 °C | MS, D28P-6 | Body | No | |||||
| D40P-19A | 40mm | 16 bar | 85 °C | MS, D40P-19A | Body | No | |||||
| D40P-19B2 | 40mm | 16 bar | 85 °C | MS, D40P-19B2 | Body | No | |||||
| D56P-1 | 56mm | 16 bar | 85 °C | MS, D56P-1 | Body | No | |||||
| D56P-2 | 56mm | 16 bar | 85 °C | MS, D56P-2 | Body | No | |||||
| D56P-3 | 56mm | 16 bar | 85 °C | MS, D56P-3 | Body | No |
2-way, ceramic disc, rotary diverter valve which controls and diverts the flow, for insertion into specifically dimensioned bodies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of swing gate, non-return valves with blue epoxy coated ductile iron bodies and EPDM swing gates. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of pilot operated pressure reducing valves with ductile iron bodies (blue epoxy coating) and EPDM diaphragm and O-rings. The products are supplied with auxiliary fittings: spherical valves, pressure gauges, a pilot valve, a needle valve and stainless steel tubes. The DN400 model also includes a Y-pattern strainer. Maximum inlet supply pressure 16.0 bar. The outlet pressure is adjustable between 0.7~16.0 bar. Maximum operating temperature 65°C.
Range of 3-way brass spherical valves incorporating a chrome plated brass ball and PTFE seats. Maximum working pressure: See models Maximum operating temperature 60.0°C
Range of in line spherical valves incorporating chrome plated brass bodies, chrome plated brass ball. Model 825212 & 803815 incorporate a single lever operating member, models 825015 and 8250152 have no operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of in-line lever operated spherical (SB2415) or screwdriver operated servicing (SB1915 & SB1922) valves with chromium plated brass bodies and balls, EPDM seals and ‘SharkBite’ push fit end connections. For use with PB pipe manufactured to EN7291-2:2010, PEX Pipe Manufactured to EN 7291-3:2010 and copper pipe manufactured to EN1057. Maximum working pressure: 12.5 Bar at 20°C (PEX & PB Pipe) 6.0 Bar at 95°C (PEX & PB Pipe) 20.0 Bar at 20°C (Copper Pipe) 16.0 Bar at 95°C (Copper Pipe)
Range of spherical valves incorporating brass bodies and balls (nickel plated), EPDM rubber ‘O’-rings, PTFE seats and red or blue coloured lever type operating members. Maximum working pressure; 10 Bar Maximum operating temperature; 65°c
Range of spherical valves incorporating brass bodies and ball. Maximum working pressure see models. Maximum operating temperature 100°C.
Range of press fit spherical valves with brass bodies, stainless steel balls and PTFE seats. The valve are available with lever, extended lever, lockshield lever and butterfly handle operating members. For use with copper pipe (manufactured to EN1057) and stainless-steel pipe (manufactured to EN10312). Jointing is achieved via a crimping tool using a ‘M’ or ‘V’ profile (model dependent). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Screwdriver operated angled spherical valve with a brass body and ball, PTFE seats and EPDM ‘O’-rings. Compression connection is to be used with copper pipe EN1057. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of blue epoxy coated ductile iron gate valves with an EPDM coated ductile iron wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of inlet control groups with DZR brass bodies consisting of an in-line, adjustable pressure reducing valve (adjustable in the range of 1.0 bar to 6.0 bar, pre-set at 3.0 bar), a pressure relief valve (6.0 bar) and an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 16 Bar Maximum operating temperature 85°C
'Grilamid TR ICR 12 LS natural' (appears white, transparent), 'Grilamid TR ICR 12 LS yellow 6908' (yellow coloured) and 'Grilamid TR ICR 12 LS blue 4271' (blue coloured). Injection moulded PA MACM12/X materials. For use with water up to 85°C.
'Anchor Pro Plus'. Site applied, two-part (supplied with internal mixing nozzle so no manual mixing required), brown coloured chemical anchor resin. Apply as per manufacturer's instructions dated 2025 - 12 - 09. Cure for 4 days@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'TIMCO VESF 300/VESF 410'. Site applied, two-part (supplied with internal mixing nozzle so no manual mixing required), brown coloured chemical anchor resin. Apply as per manufacturer's instructions dated 01.12.2025. Cure for 4 days@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 24016** | Various | 1/2" BSP (F) | 8 bar | 85 °C | NLB | On body | No | Ceramic cartridge | C-plate | Aerator | Interconnecting Hoses, |
** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.
Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless brass body). Flow is controlled by a solenoid valve and is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C
Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use
BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a Pneumatic or Cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| WJ 15212 CH | Chrome | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 23212BBR | Brushed Brass | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 27212 BBL | Brushed Black | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 28212 MB | Matt Black | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 21212 BRZ | Brushed Bronze | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 32412 CH | Chrome | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 33412 BBR | Brushed Brass | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 37412 BBL | Brushed Black | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 38412 MB | Matt Black | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No | ||||
| WJ 31412 BRZ | Brushed Bronze | 1/2BSP(M) | Open outlet bar | 60 °C | ZHONGRUIYISHENG | on the plate | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| WSH** | Various | BSP 1/2(F) | 12 bar | 65 °C | Kind | Body | No | Ceramic cartridge | Not Applicable |
C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F1200* | chrome or matte black | 3/4” BSP(F) | 5 bar | 85 °C | KY-LIN | on body | No | Ceramic cartridge |
Where * denotes the finish color, and can be replaced with the following: CHR = Chrome BLK = Matte Black The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T2609 | 26mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T3503 | 35mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T3505 | 35mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T4003 | 40mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T4005 | 40mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T3507 | 35mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T3506 | 35mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T4010 | 40mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T3511 | 35mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge | ||||
| T3516 | 35mm | 16 bar | 85 °C | Company brand, WRAS | Body | No | Ceramic cartridge |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 108-1010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 310-1010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 365-1010 | Chrome plated | 1/2" BSP (F) | 5 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 220-1010 | Chrome plated | 1/2" BSP (F) | 10 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 108-1080 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 310-1080 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 365-1080 | Chrome plated | 1/2" BSP (F) | 5 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 220-1080 | Chrome plated | 1/2" BSP (F) | 10 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3320-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3188-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3313-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3322-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3322A-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3322B-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3274-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3271-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator |
Where ** represents finish and can be replaced by: CR = Chrome plated, MB = Matt black， BB = Brushed brass， BN = Brushed nickel, GM = Gun Metal
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 521502 - KANO TP HP CHR | Chrome (CHR) | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 525028 - KANO TP HP ANT / CHR | ANT / CHR | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 525030 - KANO TP HP SGW / CHR | SGW / CHR | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 525033 - KANO TP HP CAF / CHR | CAF / CHR | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 526175 - KANO TP HP BLA / CHR | BLA / CHR | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 526667 - KANO TP HP BL | BL | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 526950 - KANO TP HP VGR / CHR | VGR / CHR | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 526951 - KANO TP HP SOW / CHR | SOW / CHR | 3/8"" | 10 bar | 70 °C | BLANCO | body | Yes | Ceramic cartridge | Not Applicable | Aerator |
CHR - Chrome ANT - anthracite SGW - silgranite white CAF - coffee BLA - black BL - black matt VGR - volcano grey SOW - soft white
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ROC2MB | MATT BLACK | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ROC2RC | REGENCY COPPER | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ROC2AB | ARTISAN BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ROC2BN | BRUSHED NICKEL | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ROC2CP | CHROME | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ROC2BB | BRUSHED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ROC2PB | PATINATED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| TU81073BV | MATT BLACK | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| TU81073RC | REGENCY COPPER | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| TU81073AB | ARTISAN BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| TU81073PB | PATINATED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| TU81073CP | CHROME | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| TU81073BB | BRUSHED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| TU81073BS | BRUSHED NICKEL | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| VITCP | CHROME | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| VITPB | PATINATED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| VITBS | BRUSHED NICKEL | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| SA2CP | CHROME | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| SA2PB | PATINATED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| SA2BN | BRUSHED NICKEL | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| SA2CP | CHROME | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ZO3BB | BRUSHED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| ZO2BB | BRUSHED BRASS | 1/2" BSP | 5 bar | 60 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EMB20CP | CHROME | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20BN | BRUSHED NICKEL | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20MB | MATT BLACK | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20AB | ARTISAN BRASS | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20BB | BRUSHED BRASS | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20PB | PATINATED BRASS | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 41805 | Chrome plated | 3/4" BSP (M) | 10 bar | 60 °C | BOKEYA | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 81205 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | BOKEYA | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Open Outlet | |
| 81405 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | BOKEYA | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Open Outlet | |
| 91205 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | BOKEYA | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Open Outlet |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 108-4020 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| 310-4010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| 220-4010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| 365-4010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Not Applicable | Aerator |
Range of two-hole, fixed, single outlet combination tap assemblies (brass body – various finishes) consisting of a ceramic cartridge with single lever operating member and a spout outlet with a plastic aerator. Products are supplied with stainless steel braided, PE lined flexible interconnecting hose assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.
Page 47 of 50
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
