KWC DVS Approvals


#2102801

Range of wall mounted, electronically controlled spout outlets with stainless steel bodies. Flow is controlled via a solenoid valve activated via an infra-red sensor. Models AT07-102 and AT07-103 are supplied with a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2102801
Size:
15mm compression
Marking:
AT07-101 and AT07104: DVS on underside of spout. AT07-102 and AT103: DVS on end of spout.
Installation Requirements:
R001 R040
Expiry date:
28/02/2026
Model:
AT07-101 AT07-102 AT07-103 AT07-104

Approval Holder:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company
Manufacturer:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#2011047

Range of wall mounted, single hole, single outlet (fixed) combination tap assemblies with chromium plated, DZR brass bodies. The products incorporate a single sequential headwork with a single lever operating member or a push button. The spout outlets incorporate a plastic flow straightener. The inlets incorporate an approved check valve cartridge however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with metal back nuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011047
Size:
10mm copper tails
Marking:
DVS on indice.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
MT04-001 & AT04-002
Product Images

Approval Holder:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company
Manufacturer:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#2105314

DC type pipe interrupter with a permanent atmospheric vent. Chomium plated DZR brass body and shroud. Maximum working pressure 8.0 bar. Maximum operating temperature 40°C.

Section:
0014 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2. Type DC - Pipe interrupter with permanent atmosphere vent. The device must be fitted with the lowest point of the air aperture not less than 150mm above the free discharge point, or spillover level of an appliance, and have no valve, flow restrictor or tap on its outlet.
WRAS Approval Number:
2105314
Size:
15mm compression x 22mm compression
Marking:
Company logo, (DVS) CR & flow arrow on body.
Installation Requirements:
R001 R165
Expiry date:
31/05/2026
Model:
UC00-001

Approval Holder:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company
Manufacturer:
Ideal China Building Material Int’l Corp
Company Name
Ideal China Building Material Int’l Corp
Address
2F-2 No 137 Sec 4 Hsin Yi Rd Taipei
General Email

View All Listings by this Company

Print This Approval


#2309515

'Medi-Discs'. White coloured, injection moulded ABS shower disc component. For use with water up to 85°C.

Section:
5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:
30/09/2028

Approval Holder:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#2311323

Single flush WC outlet valves with an ABS plastic body (WC01), operated via a mains powered infra red sensor assembly (WC03). Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2311323
Size:
1 ½” BSP(M) SIZE ADDED OCTOBER 2024 2” BSP
Marking:
DVS, website, telephone no on sensor rosette.
Installation Requirements:
R001 R571 R572
Expiry date:
30/11/2028
Model:
WCO1 (flush valve) To be installed using the following kit: WCO3 (flush valve kit)
Product Images

Approval Holder:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#240602060

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
240602060
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
DVS on cap IMIX, CR and size on body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
15mm Compression Models: AC17-047 22mm Compression Models: AC17-048

Approval Holder:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#241204724

Range of urinal flushing mechanisms, consisting of a solenoid valve controlling the flow which is actuated via an infra-red sensor. Models are either mains or battery operated and are available in a variety of enclosure options Maximum operating pressure 8 bar. Maximum operating temperature 23°C

Section:
1307 Flushing Mechanisms
Section Subtitle:
Urinals.
WRAS Approval Number:
241204724
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compresion
Marking:
Flushmatic & DVS on body.
Installation Requirements:
R001 R075 R090
Expiry date:
31/12/2029
Model:
Flushmatic range: UC01-001 UC01-003 UC01-004 UC01-005 UC01-006 UC01-007 UC01-008 UC01-009 UC01-014 UC01-015 UC01-016 UC01-017 UC01-018 UC01-024
Product Images

Approval Holder:
KWC DVS
Company Name
KWC DVS
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.