Range of single hole, single outlet (swivel) combination tap assemblies with (stainless steel bodies - various finishes), incorporating a ceramic cartridge headwork controlling the hot and cold with a single lever operating member. The boiling and purified water is controllied via a ceramic disc headwork incorporating a manual override button and a dome type headwork. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway: 98 °C; for other water pathway: 85 °C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240604034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

30/06/2029

Size:

Hot – Stainless steel braided PEX lined flexible hose assemblies incorporating a ½” BSP (F) captive nut end connection. Cold - Stainless steel braided PEX lined flexible hose assemblies incorporating a 3/8” BSP (F) captive nut end connection ½” (F) x 3/8” (M) x 3/8” (M) tee connector.

Marking:

NLB on body

Installation Requirements:

R001 R006 R010

Model:

13024** 13026** 14026** 14036** ** represent different finishes No suffix: Chrome plated H: Black N: Nickel brushed GJS: Zirconium gold brushed G: Zirconium gold QTSL: Brushed bronze bright QTS: Brushed bronze matte TJ: Titanium gold TJLS: Titanium gold brushed MGJ: Rose gold MGJL: Rose gold brushed HGT: Red bronze HTL: Yellow bronze brushed HTS: Red bronze brushed PVDQH: Gun grey HQ: Gun grey brushed Q: Bronze DYB: Matte white STS: Acid copper brushed BZ: Spray pearl white DMGJ: Light rose gold brushed

Approval Holder:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Address

JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU

View All Listings by this Company

Manufacturer:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Address

JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU

View All Listings by this Company

Range of single-hole, multiple outlet, swivel, combination tap assemblies (brass bodies - various finishes) a quarter turn ceramic disc controlling the flow to the swivel arm with a dome type operating member and a ceramic cartridge with a single lever controlling the flow to the pull-out spray outlet incorporating a plastic aerator. The spray outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway 98°C, for mixed water pathway 65C and purified water pathway 85°C

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.

WRAS Approval Number:

241004027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/10/2029

Note:

IRN R170 only applies to the pure water outlet on the swivel arm.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections

Marking:

NLB on body.

Installation Requirements:

R001 R006 R009 R010 R170

Model:

14013** ** represent different finishes No suffix: Chrome plated H: Black N: Nickel brushed GJS: Zirconium gold brushed G: Zirconium gold QTSL: Brushed bronze bright QTS: Brushed bronze matte TJ: Titanium gold TJLS: Titanium gold brushed MGJ: Rose gold MGJL: Rose gold brushed HGT: Red bronze HTL: Yellow bronze brushed HTS: Red bronze brushed PVDQH: Gun grey HQ: Gun grey brushed Q: Bronze DYB: Matte white STS: Acid copper brushed BZ: Spray pearl white DMGJ: Light rose gold brushed

Manufacturer:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Address

JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU

View All Listings by this Company

Braided, double outlet, silicone hose assembly with stainless steel connectors. Maximum operating temperature 98°C. Open outlet use only.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

241004713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/10/2029

Size:

14.69mm OD spigot.

Marking:

NLB logo, WRAS, year of manufacture by YYYY on ferrule

Installation Requirements:

R001 R040

Model:

13013-17C - Pull out hose

Approval Holder:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Address

JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU

View All Listings by this Company