'Super Poxy 505TL'. Factory applied, grey coloured, two-component Epoxy coating. Mix Parts A & B in a 100:20 weight ratio and apply as per manufacturer's TDS dated '2026.01.14'. Cure for 24 hours@20°C. For use with water up to 23°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

251155067

Expiry date:

30/11/2030

Approval Holder:

Moonchang Co., Ltd.

Company Name

Moonchang Co., Ltd.

Address

61, Guksandan-daero, 40-gil, Guji-myeon, Dalseong-gun, Daegu, Gyeongsangbuk-Do

Country

Korea, Republic of

View All Listings by this Company

'DUAYEN ANTIBLAST GEÇIRIMSIZ SPREY BOYA KAPLAMA'. Factory applied, two-component, black coloured (once mixed and applied), Polyurea coating. Mix parts A & B in a 1:1 volume ratio and apply as per manufacturer's TDS 'Rev01', date of issue '22.04.2024'. Cure for 14 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

251255044

Expiry date:

31/12/2030

Approval Holder:

DUAYEN YAPI KIMYA VE MAKINE SAN.TIC.A.S

Company Name

DUAYEN YAPI KIMYA VE MAKINE SAN.TIC.A.S

Address

Nato Yolu 18 Mart Caddesi, No 23, Kat 1, Y.Dudullu-Umraniye, Istanbul

Country

Turkey

View All Listings by this Company

‘Intergard 269’ primer for use with ‘Interline 975’ coating. Site applied, off-white coloured (once mixed and applied) epoxy coating system comprising of a two-part primer and two-part topcoat. Mix parts A & B of ‘Intergard 269’ primer in a 4:1 volume ratio and apply as per manufacturer’s TDS reference ‘206’, dated ‘11/03/2016’. Cure for 24 hours@10°C. Mix parts A & B of ‘Interline 975’ coating in a 2.2:1 volume ratio and apply as per manufacturer’s TDS reference ‘4236’, dated ‘04/02/2015’. Cure for 14 days@10°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250955071

Expiry date:

30/09/2030

Approval Holder:

AkzoNobel - International Paint

Company Name

AkzoNobel - International Paint

Postcode

NE10 0LX

View All Listings by this Company

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260101701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male

Marking:

Cap of Syphon marked ‘Cascade +’ or ‘Dudley Turbo’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley BS1212 part 3 on front face of back plate

Installation Requirements:

R001 R280

Expiry date:

31/01/2031

Model:

Slimline WC Cistern.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260101702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Cap of Syphon marked ‘Cascade +’ or ‘Dudley Turbo’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley BS1212 part 3 on front face of back plate

Installation Requirements:

R001 R280

Expiry date:

31/01/2031

Model:

Mirage WC Cistern.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260101703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male or 15mm Push-fit Inlet connection.

Marking:

Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.

Installation Requirements:

R001 R280

Expiry date:

31/01/2031

Model:

OBC Concealed Cistern (Category 3)

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260101705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male or 15mm Push-fit Inlet connection.

Marking:

Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.

Installation Requirements:

R001 R280

Expiry date:

31/01/2031

Model:

Element Cistern

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a Pneumatic or Cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2034 Cistern - Flushing

Section Subtitle:

Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.

WRAS Approval Number:

260101704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male or 15mm Push-fit Inlet connection.

Marking:

Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.

Installation Requirements:

R001 R280

Expiry date:

31/01/2031

Model:

OBC Concealed Cistern (Category 5).

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Wall mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/12/2030

Approval Holder:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD

Company Name

ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave Jiaojiang District, Taizhou City Zhejiang Province

Postcode

318000

Country

CHINA

Phone

+86-576-88675561

General Email

weijoy@weijoy.cn

View All Listings by this Company

Manufacturers:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Plastic body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/01/2031

Approval Holder:

Wenzhou City Yuebo Cartridge Co., Ltd

Company Name

Wenzhou City Yuebo Cartridge Co., Ltd

Address

22-9 Luomei Avenue, Haicheng Street Wezhou

Postcode

325055

Country

China

General Email

5273363642@qq.com

View All Listings by this Company

Manufacturers:

Wenzhou City Yuebo Cartridge Co., Ltd

Section:

0442 Thermostatic cartridges

Description:

A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

Plastic bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

28/02/2031

Approval Holder:

Kaiping Yizhan Valve Core Co., Ltd

Company Name

Kaiping Yizhan Valve Core Co., Ltd

Address

BUILDING 1, NO.9, 2nd CUIHU ROAD CUISHANHU NEW DISTRICT Kaiping City, Guangdong Province

Postcode

529300

Country

China

General Email

yizhan@twmj.com

View All Listings by this Company

Manufacturers:

Kaiping Yizhan Valve Core Co., Ltd.

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck mounted. Stainless-steel braided, EPDM lined flexible inlet hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

28/02/2031

Notes & Further Information

Where ** represents finish and can be replaced by: CR = Chrome plated, MB = Matt black， BB = Brushed brass， BN = Brushed nickel, GM = Gun Metal

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

Phone

0086-13777626837

General Email

305779895@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Carlota Sanitary Ware Manufactory Co., Ltd

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted Stainless steel braided PE or PEX lined flexible inlet hoses Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2031

Notes & Further Information

CHR - Chrome ANT - anthracite SGW - silgranite white CAF - coffee BLA - black BL - black matt VGR - volcano grey SOW - soft white

Approval Holder:

BLANCO GmbH + Co KG

Company Name

BLANCO GmbH + Co KG

Address

Flehinger Strasse 59 Oberderdingen

Postcode

75038

Country

Germany

General Email

certification-water@blanco.de

View All Listings by this Company

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted. Capable of achieving AUK3 tap gap. EPDM lined Stainless Steel braided inlet hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2031

Approval Holder:

Clearwater Products Limited t/a Sterling

Company Name

Clearwater Products Limited t/a Sterling

Address

Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire

Postcode

GL20 8BB

Country

United Kingdom

Phone

0168429955

General Email

2894475300@qq.com

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0470 Combination Tap Assemblies

Description:

A Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted Capable of achieving AUK3 Tap Gap EPDM lined Stainless Steel Braided inlet hoses

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2031

Approval Holder:

Clearwater Products Limited t/a Sterling

Company Name

Clearwater Products Limited t/a Sterling

Address

Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire

Postcode

GL20 8BB

Country

United Kingdom

Phone

0168429955

General Email

2894475300@qq.com

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes) incorporating quarter turn ceramic disc headworks with hand wheel operating members (ZA1145SG model) or a ceramic cartridge headwork with a single lever operating member (all other models). The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250912026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

ZA1145SG model: GAOAO on front of body. All other models: GAOAO on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

ZA3086SG, ZA3087SG, ZA3087YB(PC), ZA3073SG, ZA3073LR, ZA3073YB, ZA1145SG, ZA3088YB, MA3583.

Approval Holder:

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Postcode

318020

Country

China

General Email

2900324142@qq.com

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2031

Approval Holder:

Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.

Company Name

Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.

Address

Saozhoushan Industrial Zone Qinggang Town, Yuhuan, Zhejiang

Postcode

317600

Country

China

General Email

105069040@qq.com

View All Listings by this Company

Manufacturers:

Yuhuan Bokeya Sanitary Ware Technology Co., Ltd

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2031

Notes & Further Information

Where ** represents finish and can be replaced by: CR = Chrome plated, MB = Matt black， BB = Brushed brass， BN = Brushed nickel, GM = Gun Metal

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

Phone

0086-13777626837

General Email

305779895@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Carlota Sanitary Ware Manufactory Co., Ltd

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2031

Approval Holder:

Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.

Company Name

Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.

Address

Saozhoushan Industrial Zone Qinggang Town, Yuhuan, Zhejiang

Postcode

317600

Country

China

General Email

105069040@qq.com

View All Listings by this Company

Manufacturers:

Yuhuan Bokeya Sanitary Ware Technology Co., Ltd

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with Mingshi (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304386

Size:

See model for size.

Marking:

YuGuard and size

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

OYH-U-Pre-Brass-Coupling 16×16 OYH-U-Pre-Brass-Coupling 18×18 OYH-U-Pre-Brass-Coupling 20×20 OYH-U-Pre-Brass-Coupling 25×25 OYH-U-Pre-Brass-Coupling 26×26 OYH-U-Pre-Brass-Coupling 32×32 OYH-U-Pre-Brass-Red Coupling 20×16 OYH-U-Pre-Brass-Red Coupling 20×18 OYH-U-Pre-Brass-Red Coupling 25×16 OYH-U-Pre-Brass-Red Coupling 25×18 OYH-U-Pre-Brass-Red Coupling 25×20 OYH-U-Pre-Brass-Red Coupling 26×16 OYH-U-Pre-Brass-Red Coupling 26×18 OYH-U-Pre-Brass-Red Coupling 26×20 OYH-U-Pre-Brass-Red Coupling 32×16 OYH-U-Pre-Brass-Red Coupling 32×18 OYH-U-Pre-Brass-Red Coupling 32×20 OYH-U-Pre-Brass-Red Coupling 32×25 OYH-U-Pre-Brass-Red Coupling 32×26 OYH-U-Pre-Brass-M Coupling 16×1/2"M OYH-U-Pre-Brass-M Coupling 16×3/4"M OYH-U-Pre-Brass-M Coupling 18×1/2"M OYH-U-Pre-Brass-M Coupling 18×3/4"M OYH-U-Pre-Brass-M Coupling 20×1/2"M OYH-U-Pre-Brass-M Coupling 20×3/4"M OYH-U-Pre-Brass-M Coupling 20×1"M OYH-U-Pre-Brass-M Coupling 25×1/2"M OYH-U-Pre-Brass-M Coupling 25×3/4"M OYH-U-Pre-Brass-M Coupling 25×1"M OYH-U-Pre-Brass-M Coupling 26×1/2"M OYH-U-Pre-Brass-M Coupling 26×3/4"M OYH-U-Pre-Brass-M Coupling 26×1"M OYH-U-Pre-Brass-M Coupling 32×1/2"M OYH-U-Pre-Brass-M Coupling 32×3/4"M OYH-U-Pre-Brass-M Coupling 32×1"M OYH-U-Pre-Brass-M Coupling 32×1-1/4"M OYH-U-Pre-Brass-M Coupling 32×1-1/2"M OYH-U-Pre-Brass-F Coupling 16×1/2"F OYH-U-Pre-Brass-F Coupling 16×3/4"F OYH-U-Pre-Brass-F Coupling 16×1"F OYH-U-Pre-Brass-F Coupling 18×1/2"F OYH-U-Pre-Brass-F Coupling 18×3/4"F OYH-U-Pre-Brass-F Coupling 20×1/2"F OYH-U-Pre-Brass-F Coupling 20×3/4"F OYH-U-Pre-Brass-F Coupling 20×1"F OYH-U-Pre-Brass-F Coupling 25×1/2"F OYH-U-Pre-Brass-F Coupling 25×3/4"F OYH-U-Pre-Brass-F Coupling 25×1"F OYH-U-Pre-Brass-F Coupling 26×1/2"F OYH-U-Pre-Brass-F Coupling 26×3/4"F OYH-U-Pre-Brass-F Coupling 26×1"F OYH-U-Pre-Brass-F Coupling 32×1/2"F OYH-U-Pre-Brass-F Coupling 32×3/4"F OYH-U-Pre-Brass-F Coupling 32×1"F OYH-U-Pre-Brass-F Coupling 32×1-1/4"F OYH-U-Pre-Brass-F Coupling 32×1-1/2"F OYH-U-Pre-Brass-Elbow 16×16 OYH-U-Pre-Brass-Elbow 18×18 OYH-U-Pre-Brass-Elbow 20×20 OYH-U-Pre-Brass-Elbow 25×25 OYH-U-Pre-Brass-Elbow 26×26 OYH-U-Pre-Brass-Elbow 32×32 OYH-U-Pre-Brass-M Elbow 16×1/2"M OYH-U-Pre-Brass-M Elbow 16×3/4"M OYH-U-Pre-Brass-M Elbow 18×1/2"M OYH-U-Pre-Brass-M Elbow 18×3/4"M OYH-U-Pre-Brass-M Elbow 20×1/2"M OYH-U-Pre-Brass-M Elbow 20×3/4"M OYH-U-Pre-Brass-M Elbow 20×1"M OYH-U-Pre-Brass-M Elbow 25×1/2"M OYH-U-Pre-Brass-M Elbow 25×3/4"M OYH-U-Pre-Brass-M Elbow 25×1"M OYH-U-Pre-Brass-M Elbow 26×1/2"M OYH-U-Pre-Brass-M Elbow 26×3/4"M OYH-U-Pre-Brass-M Elbow 26×1"M OYH-U-Pre-Brass-M Elbow 32×1/2"M OYH-U-Pre-Brass-M Elbow 32×3/4"M OYH-U-Pre-Brass-M Elbow 32×1"M OYH-U-Pre-Brass-M Elbow 32×1-1/4"M OYH-U-Pre-Brass-F Elbow 16×1/2"F OYH-U-Pre-Brass-F Elbow 16×3/4"F OYH-U-Pre-Brass-F Elbow 18×1/2"F OYH-U-Pre-Brass-F Elbow 18×3/4"F OYH-U-Pre-Brass-F Elbow 20×1/2"F OYH-U-Pre-Brass-F Elbow 20×3/4"F OYH-U-Pre-Brass-F Elbow 20×1"F OYH-U-Pre-Brass-F Elbow 25×1/2"F OYH-U-Pre-Brass-F Elbow 25×3/4"F OYH-U-Pre-Brass-F Elbow 25×1"F OYH-U-Pre-Brass-F Elbow 26×1/2"F OYH-U-Pre-Brass-F Elbow 26×3/4"F OYH-U-Pre-Brass-F Elbow 26×1"F OYH-U-Pre-Brass-F Elbow 32×1/2"F OYH-U-Pre-Brass-F Elbow 32×3/4"F OYH-U-Pre-Brass-F Elbow 32×1"F OYH-U-Pre-Brass-F Elbow 32×1-1/4"F OYH-U-Pre-Brass-Wpl Elbow 16×1/2"F OYH-U-Pre-Brass-Wpl Elbow 16×3/4"F OYH-U-Pre-Brass-Wpl Elbow 18×1/2"F OYH-U-Pre-Brass-Wpl Elbow 20×1/2"F OYH-U-Pre-Brass-Wpl Elbow 20×3/4"F OYH-U-Pre-Brass-Tee 16×16 ×16 OYH-U-Pre-Brass-Tee 18×18 ×18 OYH-U-Pre-Brass-Tee 20×20 ×20 OYH-U-Pre-Brass-Tee 25×25×25 OYH-U-Pre-Brass-Tee 26×26×26 OYH-U-Pre-Brass-Tee 32×32×32 OYH-U-Pre-Brass-Red Tee 16×20×16 OYH-U-Pre-Brass-Red Tee 16×25×16 OYH-U-Pre-Brass-Red Tee 16×26×16 OYH-U-Pre-Brass-Red Tee 18×16×18 OYH-U-Pre-Brass-Red Tee 18×20×18 OYH-U-Pre-Brass-Red Tee 18×25×18 OYH-U-Pre-Brass-Red Tee 18×26×18 OYH-U-Pre-Brass-Red Tee 20×16×20 OYH-U-Pre-Brass-Red Tee 20×18×20 OYH-U-Pre-Brass-Red Tee 20×25×20 OYH-U-Pre-Brass-Red Tee 25×16×25 OYH-U-Pre-Brass-Red Tee 25×16×16 OYH-U-Pre-Brass-Red Tee 26×16×16 OYH-U-Pre-Brass-Red Tee 25×18×25 OYH-U-Pre-Brass-Red Tee 25×20×25 OYH-U-Pre-Brass-Red Tee 25×32×25 OYH-U-Pre-Brass-Red Tee 20×26×20 OYH-U-Pre-Brass-Red Tee 26×16×26 OYH-U-Pre-Brass-Red Tee 26×18×26 OYH-U-Pre-Brass-Red Tee 26×20×26 OYH-U-Pre-Brass-Red Tee 26×32×26 OYH-U-Pre-Brass-Red Tee 32×16×32 OYH-U-Pre-Brass-Red Tee 32×18×32 OYH-U-Pre-Brass-Red Tee 32×20×32 OYH-U-Pre-Brass-Red Tee 32×25×32 OYH-U-Pre-Brass-Red Tee 25×16×20 OYH-U-Pre-Brass-Red Tee 32×20×25 OYH-U-Pre-Brass-Red Tee 26×16×20 OYH-U-Pre-Brass-Red Tee 32×20×26 OYH-U-Pre-Brass-Red Tee 20×16×16 OYH-U-Pre-Brass-Red Tee 20×20×16 OYH-U-Pre-Brass-Red Tee 25×25×18 OYH-U-Pre-Brass-Red Tee 25×25×20 OYH-U-Pre-Brass-Red Tee 25×18×18 OYH-U-Pre-Brass-Red Tee 25×20×20 OYH-U-Pre-Brass-Red Tee 25×16×20 OYH-U-Pre-Brass-Red Tee 32×20×25 OYH-U-Pre-Brass-Red Tee 26×26×16 OYH-U-Pre-Brass-Red Tee 26×26×18 OYH-U-Pre-Brass-Red Tee 26×26×20 OYH-U-Pre-Brass-Red Tee 26×18×18 OYH-U-Pre-Brass-Red Tee 26×20×20 OYH-U-Pre-Brass-Red Tee 26×20×16 OYH-U-Pre-Brass-Red Tee 32×20×26 OYH-U-Pre-Brass-Red Tee 32×32×16 OYH-U-Pre-Brass-Red Tee 32×32×20 OYH-U-Pre-Brass-Red Tee 32×32×26 OYH-U-Pre-Brass-Red Tee 32×25×25 OYH-U-Pre-Brass-Red Tee 32×26×26 OYH-U-Pre-Brass-Red Tee 32×26×32 OYH-U-Pre-Brass-M Tee 16×1/2"M×16 OYH-U-Pre-Brass-M Tee 16×3/4"M×16 OYH-U-Pre-Brass-M Tee 20×1/2"M×20 OYH-U-Pre-Brass-M Tee 20×3/4"M×20 OYH-U-Pre-Brass-F Tee 16×1/2"F×16 OYH-U-Pre-Brass-F Tee 16×3/4"F×16 OYH-U-Pre-Brass-F Tee 18×1/2"F×18 OYH-U-Pre-Brass-F Tee 18×3/4"F×18 OYH-U-Pre-Brass-F Tee 20×1/2"F×20 OYH-U-Pre-Brass-F Tee 20×3/4"F×20 OYH-U-Pre-Brass-F Tee 20×1"F×20 OYH-U-Pre-Brass-F Tee 25×1/2"F×25 OYH-U-Pre-Brass-F Tee 25×3/4"F×25 OYH-U-Pre-Brass-F Tee 25×1"F×25 OYH-U-Pre-Brass-F Tee 26×1/2"F×26 OYH-U-Pre-Brass-F Tee 26×3/4"F×26 OYH-U-Pre-Brass-F Tee 26×1"F×26 OYH-U-Pre-Brass-F Tee 32×1/2"F×32 OYH-U-Pre-Brass-F Tee 32×3/4"F×32 OYH-U-Pre-Brass-F Tee 32×1"F×32 OYH-U-Pre-Brass-F Tee 32×1-1/4"F×32 OYH-U-Pre-Brass-End cap 16×16 OYH-U-Pre-Brass-End cap 18×18 OYH-U-Pre-Brass-End cap 20×20 OYH-U-Pre-Brass-End cap 25×25 OYH-U-Pre-Brass-End cap 26×26 OYH-U-Pre-Brass-End cap 32×32 OYH-U-Pre-Brass-F Union16×1/2"F OYH-U-Pre-Brass-F Union16×3/4"F OYH-U-Pre-Brass-F Union20×1/2"F OYH-U-Pre-Brass-F Union20×3/4"F OYH-U-Pre-Brass-F Union25×1/2"F OYH-U-Pre-Brass-F Union25×3/4"F OYH-U-Pre-Brass-F Union25×1"F OYH-U-Pre-Brass-F Union26×1/2"F OYH-U-Pre-Brass-F Union26×3/4"F OYH-U-Pre-Brass-F Union26×1"F OYH-U-Pre-Brass-F Union32×1"F OYH/YG-AluFlex-B1216 OYH/YG-AluFlex-B1418 OYH/YG-AluFlex-B1620 OYH/YG-AluFlex-B2025 OYH/YG-AluFlex-B2026 OYH/YG-AluFlex-B2632

Approval Holder:

OYH Holdings LLC

Company Name

OYH Holdings LLC

Address

3 Spring House Innovation Park, Suite 201 Lower Gwynedd

Postcode

PA 19002

View All Listings by this Company

Range of brass press fittings for use with MLC PE-RT/AL/PE-RT pipe. Maximum operating pressure 10 bar. Maximum operating temperature 80°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260104016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Multipipe and size on fitting. Multipipe, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

120200 16x16mm Coupling brass press-fit 120300 20x20mm Coupling brass press-fit 120320 20x16mm Reduced Coupling brass press-fit 120400 25x25mm Coupling brass press-fit 120420 25x16mm Reduced Coupling brass press-fit 120430 25x20mm Reduced Coupling brass press-fit 120500 32x32mm Coupling brass press-fit 120530 32x20mm Reduced Coupling brass press-fit 120540 32x25mm Reduced Coupling brass press-fit 120600 40x40mm Coupling brass press-fit 120640 40x25mm Reduced Coupling brass press-fit 120650 40x32mm Reduced Coupling brass press-fit 120700 50x50mm Coupling brass press-fit 120750 50x32mm Reduced Coupling brass press-fit 120760 50x40mm Reduced Coupling brass press-fit 120800 63x63mm Coupling brass press-fit 120860 63x40mm Reduced Coupling brass press-fit 120870 63x50mm Reduced Coupling brass press-fit 121200 16x16mm Elbow 90° brass press-fit 121300 20x20mm Elbow 90° brass press-fit 121400 25x25mm Elbow 90° brass press-fit 121500 32x32mm Elbow 90° brass press-fit 121600 40x40mm Elbow 90° brass press-fit 121700 50x50mm Elbow 90° brass press-fit 121800 63x63mm Elbow 90° brass press-fit 122200 16x16x16mm Tee brass press-fit 122232 16x20x16mm Reducing Tee brass press-fit 122300 20x20x20mm Tee brass press-fit 122322 20x16x16mm Reducing Tee brass press-fit 122323 20x16x20mm Reducing Tee brass press-fit 122332 20x20x16mm Reducing Tee brass press-fit 122343 20x25x20mm Reducing Tee brass press-fit 122400 25x25x25mm Tee brass press-fit 122422 25x16x16mm Reducing Tee brass press-fit 122423 25x16x20mm Reducing Tee brass press-fit 122424 25x16x25mm Reducing Tee brass press-fit 122433 25x20x20mm Reducing Tee brass press-fit 122434 25x20x25mm Reducing Tee brass press-fit 122442 25x25x16mm Reducing Tee brass press-fit 122443 25x25x20mm Reducing Tee brass press-fit 122500 32x32x32mm Tee brass press-fit 122525 32x16x32mm Reducing Tee brass press-fit 122535 32x20x32mm Reducing Tee brass press-fit 122544 32x25x25mm Reducing Tee brass press-fit 122545 32x25x32mm Reducing Tee brass press-fit 122600 40x40x40mm Tee brass press-fit 122636 40x20x40mm Reducing Tee brass press-fit 122646 40x25x40mm Reducing Tee brass press-fit 122655 40x32x32mm Reducing Tee brass press-fit 122656 40x32x40mm Reducing Tee brass press-fit 122700 50x50x50mm Tee brass press-fit 122747 50x25x50mm Reducing Tee brass press-fit 122757 50x32x50mm Reducing Tee brass press-fit 122767 50x40x50mm Reducing Tee brass press-fit 122800 63x63x63mm Tee brass press-fit 122868 63x40x63mm Reducing Tee brass press-fit 122878 63x50x63mm Reducing Tee brass press-fit 123220 16x1/2" MT Connection brass press-fit 123230 16x3/4" MT Connection brass press-fit 123320 20x1/2" MT Connection brass press-fit 123330 20x3/4" MT Connection brass press-fit 123340 20x1" MT Connection brass press-fit 123430 25x3/4" MT Connection brass press-fit 123440 25x1" MT Connection brass press-fit 123540 32x1" MT Connection brass press-fit 123550 32x1.25 MT Connection brass press-fit 123650 40x1-1/4" MT Connection brass press-fit 123660 40x1-1/2" MT Connection brass press-fit 123760 50x1-1/2" MT Connection brass press-fit 123770 50x2" MT Connection brass press-fit 123870 63x2" MT Connection brass press-fit 124220 16x1/2" FT Connection brass press-fit 124230 16 x 3/4 " FT Connection Brass Press Fit 124320 20x1/2" FT Connection brass press-fit 124330 20x3/4" FT Connection brass press-fit 124430 25x3/4" FT Connection brass press-fit 124440 25x1" FT Connection brass press-fit 124540 32x1" FT Connection brass press-fit 124550 32x1-1/4" FT Connection brass press-fit 124650 40x1-1/4" FT Connection brass press-fit 124660 40x1-1/2" FT Connection brass press-fit 124760 50x1-1/2" FT Connection brass press-fit 124870 63x2" FT Connection brass press-fit 125220 16x1/2"FT Swivel Nut brass press fit 125230 16x3/4"FT Swivel Nut brass press fit 125320 20x1/2"FT Swivel Nut brass press fit 125330 20x3/4"FT Swivel Nut brass press fit 125430 25x3/4"FT Swivel Nut brass press fit 125440 25x1"FT Swivel Nut brass press fit 125540 32x1"FT Unplated Swivel Nut brass press fit 125550 32x1-1/4"FT Swivel Nut brass press fit 126222 16x1/2"FTx16mm Tee brass press-fit 126323 20x1/2"FTx20mm Tee brass press-fit 126424 25x1/2"FTx25mm Tee brass press-fit 126434 25x3/4"FTx25mm Tee brass press-fit 126848 63x1"FTx63mm Tee brass press-fit 128500 32x32mm 45° Elbow brass press-fit 128600 40x40mm 45° Elbow brass press-fit 128700 50x50mm 45° Elbow brass press-fit 128800 63x63mm 45° Elbow brass press-fit 129220 16x1/2" MT Elbow 90° brass press-fit 129320 20x1/2" MT Elbow 90° brass press-fit 129330 20x3/4" MT Elbow 90° brass press-fit 129430 25x3/4" MT Elbow 90° brass press-fit 129540 32x1" MT Elbow 90° brass press-fit 130220 16x1/2" FT Elbow 90° brass press-fit 130320 20x1/2" FT Elbow 90° brass press-fit 130330 20x3/4" FT Elbow 90° brass press-fit 130430 25x3/4" FT Elbow 90° brass press-fit 130540 32x1" FT Elbow 90° brass press-fit 132220 16x1/2"FT Backplate Elbow brass press fit 132320 20x1/2"FT Backplate Elbow brass press fit 135200 16mm press lever ball valve 150200 16x2mm Stop End press fit 150300 20x2.25mm Stop End press fit 150400 25x2.5mm Stop End press fit 150500 32x3mm Stop End press fit 160130 Type 1 12x15mm Nut & Insert Adapter Nickel (3 pie 160230 Type 1 16x15mm Nut & Insert Adapter Nickel (3 pie 161230 Hydris Type 1 16x15mm Compression Adaptor 3-piece 161340 Hydris Type 1 20x22mm Compression Adaptor 3-piece 163230 Type 3 16x15mm Brass Spigot Adapter Press-Fit 163340 Type 3 20x22mm Brass Spigot Adapter Press-Fit 163230 Type 3 16x15mm Brass Spigot Adapter Press-Fit 163340 Type 3 20x22mm Brass Spigot Adapter Press-Fit 164230 Type 3 16x15mm Copper Spigot Adapter Press-Fit 164340 Type 3 20x22mm Copper Spigot Adapter Press-Fit 164440 Type 3 25x22mm Copper Spigot Adapter Press-Fit 164450 Type 3 25x28mm Copper Spigot Adapter Press-Fit 164550 Type 3 32x28mm Copper Spigot Adapter Press-Fit 165232 16xCu15 x 150mm Radiator elbow Copper 165233 16xCu15 x 330mm Radiator elbow Copper 166230 Type 4 16x15mm Brass Press-Fit to Copper Comp 166340 Type 4 20x22mm Brass Press-Fit to Copper Comp 166440 Type 4 25x22mm Brass Press-Fit to Copper Comp 167230 Type 4 16x15mm Press-Fit Elbow to Copper Comp 169232 16xCu15 x 150mm Radiator elbow chrome plate 169233 16xCu15 x 330mm Radiator elbow Chrome Plate 175230 Type 5 MLC to Press copper 16x15mm M Profile 175330 Type 5 MLC to Press copper 20x15mm M Profile 175340 Type 5 MLC to Press copper 20x22mm M Profile 175440 Type 5 MLC to Press copper 25x22mm M Profile 135300 20mm press lever ball valve 135400 25mm press lever ball valve 135500 32mm press lever ball valve 135600 40mm press lever ball valve 135700 50mm press lever ball valve 135800 63mm press lever ball valve 20-03124 Eurocone (3/4" FT) Pipe Connector 12x1.4mm (3-piece) 20-03141 Eurocone (3/4" FT) Pipe Connector 14x2mm (3-piece) 20-03201 Eurocone (3/4"FT) Pipe Connector 20x2.25mm (3 Piece) 20-03161 Eurocone (3/4" FT) Pipe Connector 16x2mm (3-piece) 20-03171 Eurocone (3/4" FT) Pipe Connector 17x2mm (3-piece) 20-03123 Eurocone (3/4" FT) Pipe Connector 12x1.6mm (3-piece) 101320 20x2.25mm MLC pipe 50m coil 101220 16x2mm MLC pipe 50m coil 101230 16x2mm MLC pipe 75m coil 101240 16x2mm MLC pipe 100m coil 101250 16x2mm MLC pipe 120m coil 101260 16x2mm MLC pipe 200m coil 101270 16x2mm MLC pipe 500m coil 101420 25x2.5mm MLC pipe 50m coil 109221 16x2mm MLC pipe 50m coil 9mm Insulated Blue 109222 16x2mm MLC pipe 50m coil 9mm Insulated Red 109421 25x2.5mm MLC pipe 50m coil 9mm Insulated Blue 109422 25x2.5mm MLC pipe 50m coil 9mm Insulated Red 109521 32x3mm MLC pipe 50m coil 9mm Insulated Blue 109522 32x3mm MLC pipe 50m coil 9mm Insulated Red 110321 20x2.25mm MLC pipe 50m coil 13mm pre-ins Grey 101510 32x3mm MLC pipe 25m coil 103216 16x2mm MLC straight length 3m 103425 25x2.5mm MLC straight length 3m 103532 32x3mm MLC straight length 3m 105016 16x2mm MLC straight length 5m 105020 20x2.25mm MLC straight length 5m 105025 25x2.5mm MLC straight length 5m 105032 32x3mm MLC straight length 5m 105040 40x4mm MLC straight length 5m 105050 50x4.5mm MLC straight length 5m 105063 63x6mm MLC straights 5m 105075 75x7.5mm MLC straight length 5m 105090 90x8.5mm MLC straight length 5m 105110 110x10mm MLC straight length 5m 109321 20x2.25mm MLC pipe 50m coil 9mm Insulated Blue 109322 20x2.25mm MLC pipe 50m coil 9mm Insulated Red 110221 16x2mm MLC pipe 50m coil 13mm pre-ins Grey 110421 25x2.5mm MLC pipe 50m coil 13mm pre-ins Grey 110521 32x3mm MLC pipe 50m coil 13mm pre-ins Grey 109323 20x2.25mm MLC pipe 50m coil 9mm Insulated Grey

Approval Holder:

Multipipe Ltd

Company Name

Multipipe Ltd

Address

Unit 12 Great Hayes Business Park Lower Burnham Road Chelmsford

Postcode

CM3 6SQ

Country

Chelmsford

View All Listings by this Company

Range of press fittings (brass bodies) “KMU” with stainless steel press (‘U’ profile) collars and EPDM O-rings for use with “KELOX” range of PERT/AL/PERT multilayer pipe (‘butt welded’ variant 16mm-63mm & ‘lap welded’ variant 16mm-20mm). Maximum working pressure: 10 bar. Maximum operating temperature: 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260106001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm, 20mm, 25mm, 32mm, 40 mm, 50 mm and 63 mm.

Marking:

KE KELIT, on crimp sleeve. KELOX; size (outer diameter x wall thickness); line and batch no. and product information on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

“KELOX” PE-RT type II/AL/PE-RT type II multilayer pipes: 7521160 KM100 KELOX multilayer pipe 16x2 7521200 KM100 KELOX multilayer pipe 20x2,25 7411250 KM100 KELOX multilayer pipe 25x2,5 7411320 KM100 KELOX multilayer pipe 32x3 7410160 KM110 KELOX multilayer pipe 16x2 /5m 7527200 KM110 KELOX multilayer pipe 20x2,25 /5m 7410250 KM110 KELOX multilayer pipe 25x2,5 /5m 7410320 KM110 KELOX multilayer pipe 32x3 /5m 7410400 KM110 KELOX multilayer pipe 40x4 /5m 7410500 KM110 KELOX multilayer pipe 50x4,5 /5m 7410630 KM110 KELOX multilayer pipe 63x6 /5m 74101601 KM111 KELOX multilayer pipe nipple 16x2 75272001 KM111 KELOX multilayer pipe nipple 20x2,25 74102501 KM111 KELOX multilayer pipe nipple 25x2,5 74103201 KM111 KELOX multilayer pipe nipple 32x3 7521161 KM130 KELOX plus pipe - 9mm 16x2 7521201 KM130 KELOX plus pipe - 9mm 20x2,25 7521251 KM130 KELOX plus pipe - 9mm 25x2,5 7521321 KM130 KELOX plus pipe - 9mm 32x3 75211613 KM133 KELOX plus pipe - 13mm 16x2 75212013 KM133 KELOX plus pipe - 13mm 20x2,25 75212513 KM133 KELOX plus pipe - 13mm 25x2,5 75213213 KM133 KELOX plus pipe - 13mm 32x3 7521164 KM134 KELOX plus pipe - 4mm 16x2 7521204 KM134 KELOX plus pipe - 4mm 20x2,25 7521254 KM134 KELOX plus pipe - 4mm 25x2,5 7521324 KM134 KELOX plus pipe - 4mm 32x3 Model/Code /Number Product Name Description Connection size 75211618 KM138 KELOX Lambda Plus pipe 20 16x2 75212018 KM138 KELOX Lambda Plus pipe 20 20x2,25 75212518 KM138 KELOX Lambda Plus pipe 20 25x2,5 75213218 KM138 KELOX Lambda Plus pipe 20 32x3 1005160 KM140 KELOX pro pipe 16x2/25 1005161 KM140 KELOX pro pipe 16x2/25 1005200 KM140 KELOX pro pipe 20x2,25/28 1005201 KM140 KELOX pro pipe 20x2,25/28 71100BB0 KMU410 Coupling 16/16 71100DB0 KMU410 Coupling 20/16 71100DD0 KMU410 Coupling 20/20 71100EB0 KMU410 Coupling 25/16 71100ED0 KMU410 Coupling 25/20 71100EE0 KMU410 Coupling 25/25 71100FD0 KMU410 Coupling 32/20 71100FE0 KMU410 Coupling 32/25 71100FF0 KMU410 Coupling 32/32 71100GE0 KMU410 Coupling 40/25 71100GF0 KMU410 Coupling 40/32 71100GG0 KMU410 Coupling 40/40 71100HF0 KMU410 Coupling 50/32 71100HG0 KMU410 Coupling 50/40 71100HH0 KMU410 Coupling 50/50 71100IG0 KMU410 Coupling 63/40 71100IH0 KMU410 Coupling 63/50 71100II0 KMU410 Coupling 63/63 Model/Code /Number Product Name Description Connection size 71103BB0 KMU420 Elbow 90° 16 71103DD0 KMU420 Elbow 90° 20 71103EE0 KMU420 Elbow 90° 25 71103FF0 KMU420 Elbow 90° 32 71103GG0 KMU420 Elbow 90° 40 71103HH0 KMU420 Elbow 90° 50 71103II0 KMU420 Elbow 90° 63 71104BB0 KMU420Z Zeta elbow 90° 16 71104DD0 KMU420Z Zeta elbow 90° 20 71104EE0 KMU420Z Zeta elbow 90° 25 71106FF0 KMU425 Elbow 45° 32 71106GG0 KMU425 Elbow 45° 40 71106HH0 KMU425 Elbow 45° 50 71106II0 KMU425 Elbow 45° 63 Model/Code /Number Product Name Description Connection size 71110BBB KMU440 Tee 16/16/16 71110BDB KMU440 Tee 16/20/16 71110DBB KMU440 Tee 20/16/16 71110DBD KMU440 Tee 20/16/20 71110DDB KMU440 Tee 20/20/16 71110DDD KMU440 Tee 20/20/20 71110DED KMU440 Tee 20/25/20 71110EBB KMU440 Tee 25/16/16 71110EBD KMU440 Tee 25/16/20 71110EBE KMU440 Tee 25/16/25 71110EDD KMU440 Tee 25/20/20 71110EDE KMU440 Tee 25/20/25 71110EEE KMU440 Tee 25/25/25 71110FBF KMU440 Tee 32/16/32 71110FDF KMU440 Tee 32/20/32 71110FEE KMU440 Tee 32/25/25 71110FEF KMU440 Tee 32/25/32 71110FFF KMU440 Tee 32/32/32 71110GDG KMU440 Tee 40/20/40 71110GEG KMU440 Tee 40/25/40 71110GFF KMU440 Tee 40/32/32 71110GFG KMU440 Tee 40/32/40 71110GGG KMU440 Tee 40/40/40 71110HEH KMU440 Tee 50/25/50 71110HFH KMU440 Tee 50/32/50 71110HGH KMU440 Tee 50/40/50 71110HHH KMU440 Tee 50/50/50 71110IEI KMU440 Tee 63/25/63 71110IFI KMU440 Tee 63/32/63 71110IGI KMU440 Tee 63/40/63 71110IHI KMU440 Tee 63/50/63 71110III KMU440 Tee 63/63/63 Model/Code /Number Product Name Description Connection size 71111BBB KMU440Z Zeta tee 16/16/16 71111DDD KMU440Z Zeta tee 20/20/20 71111EEE KMU440Z Zeta tee 25/25/25 71240B02 KMU447 Adaptor tee female 16x1/2" 71240D02 KMU447 Adaptor tee female 20x1/2" 71240D04 KMU447 Adaptor tee female 20x3/4" 71240E02 KMU447 Adaptor tee female 25x1/2" 71240E04 KMU447 Adaptor tee female 25x3/4" 71240F02 KMU447 Adaptor tee female 32x1/2" 71240F04 KMU447 Adaptor tee female 32x3/4" 71240G04 KMU447 Adaptor tee female 40x3/4" 71240G05 KMU447 Adaptor tee female 40x1" 71240H05 KMU447 Adaptor tee female 50x1" 71240I05 KMU447 Adaptor tee female 63x1" 71202B01 KMU450 Adaptor male 16x3/8" 71202B02 KMU450 Adaptor male 16x1/2" 71202B04 KMU450 Adaptor male 16x3/4" 71202D02 KMU450 Adaptor male 20x1/2" 71202D04 KMU450 Adaptor male 20x3/4" 71202D05 KMU450 Adaptor male 20x1" 71202E04 KMU450 Adaptor male 25x3/4" 71202E05 KMU450 Adaptor male 25x1" 71202F04 KMU450 Adaptor male 32x3/4" 71202F05 KMU450 Adaptor male 32x1" 71202F06 KMU450 Adaptor male 32x5/4" 71202G06 KMU450 Adaptor male 40x5/4" 71202G07 KMU450 Adaptor male 40x6/4" 71202H07 KMU450 Adaptor male 50x6/4" 71202H09 KMU450 Adaptor male 50x2" 71202I09 KMU450 Adaptor male 63x2" Model/Code /Number Product Name Description Connection size 71206B02 KMU457 Adaptor female 16x1/2" 71206B04 KMU457 Adaptor female 16x3/4" 71206D02 KMU457 Adaptor female 20x1/2" 71206D04 KMU457 Adaptor female 20x3/4" 71206D05 KMU457 Adaptor female 20x1" 71206E04 KMU457 Adaptor female 25x3/4" 71206E05 KMU457 Adaptor female 25x1" 71206F04 KMU457 Adaptor female 32x3/4" 71206F05 KMU457 Adaptor female 32x1" 71206F06 KMU457 Adaptor female 32x5/4" 71206G06 KMU457 Adaptor female 40x5/4" 71206G07 KMU457 Adaptor female 40x6/4" 71206H07 KMU457 Adaptor female 50x6/4" 71206I09 KMU457 Adaptor female 63x2" 71212B01 KMU460 Elbow adaptor 90° male 16x3/8" 71212B02 KMU460 Elbow adaptor 90° male 16x1/2" 71212D02 KMU460 Elbow adaptor 90° male 20x1/2" 71212D04 KMU460 Elbow adaptor 90° male 20x3/4" 71212E04 KMU460 Elbow adaptor 90° male 25x3/4" 71212E05 KMU460 Elbow adaptor 90° male 25x1" 71212F05 KMU460 Elbow adaptor 90° male 32x1" 71216B02 KMU467 Elbow adaptor 90° female 16x1/2" 71216D02 KMU467 Elbow adaptor 90° female 20x1/2" 71216D04 KMU467 Elbow adaptor 90° female 20x3/4" 71216E04 KMU467 Elbow adaptor 90° female 25x3/4" 71216E05 KMU467 Elbow adaptor 90° female 25x1" 71216F05 KMU467 Elbow adaptor 90° female 32x1" Model/Code /Number Product Name Description Connection size 71120B00 KMU471 End cap 16 71120D00 KMU471 End cap 20 71120E00 KMU471 End cap 25 71120F00 KMU471 End cap 32 71252B2B KMU475 Wall bracket female 16x1/2" 71252D2D KMU475 Wall bracket female 20x1/2" 71254B2B KMU477 U-Wall bracket female 16x1/2" 71254D2D KMU477 U-Wall bracket female 20x1/2" 71254E2E KMU477 U-Wall bracket female 25x1/2" 71250B02 KMU480 Wall bracket 90° female 16x1/2" 71250D02 KMU480 Wall bracket 90° female 20x1/2" 71250D04 KMU480 Wall bracket 90° female 20x3/4" 71250E04 KMU480 Wall bracket 90° female 25x3/4" 71251B02 KMU480L Wall bracket 90° female 20mm 16x1/2" 71251D02 KMU480L Wall bracket 90° female 20mm 20x1/2" 71255B02 KMU480K Wall bracket 90° female short 16x1/2" 71255D02 KMU480K Wall bracket 90° female short 20x1/2" 71252B02 KMU480Z Zeta wall bracket 90° female 16x1/2" 71252D02 KMU480Z Zeta wall bracket 90° female 20x1/2"

Approval Holder:

KE KELIT

Company Name

KE KELIT

Address

Kunstsoffwerk Gesellschaft m.b.h

View All Listings by this Company

Range of brass or copper capillary solder ring fittings for use with copper pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2212381

Size:

see model

Marking:

Flowflex logo, EN1254 & Size.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

677888 Copper Capillary Solder Ring Equal Tee 15mm. 678012 Copper Capillary Solder Ring Equal Tee 22mm. 677919 Copper Capillary Solder Ring Equal Tee 28mm. 677925 Copper Capillary Solder Ring Equal Tee 35mm. 677896 Copper Capillary Solder Ring Reduced Branch Tee 22 x 22 x 15mm. 677921 Copper Capillary Solder Ring Reduced End Tee 22 x 15 x 22mm. 677992Copper Capillary Solder Ring Reduced Branch Tee 28 x 28 x 15mm. 677924 Copper Capillary Solder Ring Reduced Branch Tee 28 x 28 x 22mm. 677920 Copper Capillary Solder Ring Reduced Branch Tee 35 x 35 x 28mm. 678028Copper Capillary Solder Ring Reduced Branch and End Tee 22 x 15 x 15mm. 677989 Copper Capillary Solder Ring Equal Elbow 8mm. 677990 Copper Capillary Solder Ring Equal Elbow 10mm. 677912 Copper Capillary Solder Ring Equal Elbow 15mm. 677914 Copper Capillary Solder Ring Equal Elbow 22mm. 677916 Copper Capillary Solder Ring Equal Elbow 28mm. 677991 Copper Capillary Solder Ring Equal Elbow 35mm. 678003 Copper Capillary Solder Ring Street Elbow 15mm. 677889 Copper Capillary Solder Ring Street Elbow 22mm. 677999 Copper Capillary Solder Ring Street Elbow 28mm. 677993Copper Capillary Solder Ring 45 Deg Elbow 15mm. 678026 Copper Capillary Solder Ring 45 Deg Elbow 22mm. 678031 Copper Capillary Solder Ring 45 Deg Elbow 28mm. 678040 Copper Capillary Solder Ring 45 Deg Elbow 35mm. 677891 Copper Capillary Solder Ring Straight Coupling 8mm. 677892 Copper Capillary Solder Ring Straight Coupling 10mm. 677994 Copper Capillary Solder Ring Straight Coupling 15mm. 677997 Copper Capillary Solder Ring Straight Coupling 22mm. 677995 Copper Capillary Solder Ring Straight Coupling 28mm. 677913 Copper Capillary Solder Ring Straight Coupling 35mm. 677893 Copper Capillary Solder Ring Reducing Coupling 15 x 10mm. 678009 Copper Capillary Solder Ring Reducing Coupling 22 x 15mm. 677897 Copper Capillary Solder Ring Reducing Coupling 28 x 15mm. 678007 Copper Capillary Solder Ring Reducing Coupling 28 x 22mm. 677928 Copper Capillary Solder Ring Fitting Reducer 28 x 22mm. 677895 Copper Capillary Solder Ring Metric Imperial Coupling 22mm x 3/4". 677899 Copper Capillary Solder Ring Fitting Reducer 15 x 8mm. 677900 Copper Capillary Solder Ring Fitting Reducer 15 x 10mm. 677927 Copper Capillary Solder Ring Fitting Reducer 22 x 15mm. 677901 Copper Capillary Solder Ring Fitting Reducer 28 x 15mm. 677903 Copper Capillary Solder Ring Fitting Reducer 35 x 22mm. 677929 Copper Capillary Solder Ring Fitting Reducer 35 x 28mm. 677930 Copper Capillary Solder Ring Stop End 15mm. 677982 Copper Capillary Solder Ring Stop End 22mm. 677985 Copper Capillary Solder Ring Stop End 28mm. 677984 Copper Capillary Solder Ring Bent Tap Connector 15mm x 1/2". 677906 Copper Capillary Solder Ring Bent Tap Connector 22mm x 3/4". 677904 Copper Capillary Solder Ring Straight Tap Connector 15mm x 1/2". 677894 Copper Capillary Solder Ring Straight Tap Connector 15mm x 3/4". 677905 Copper Capillary Solder Ring Straight Tap Connector 22mm x 3/4". 677902 Copper Capillary Solder Ring Wallplate Elbow 15mm x 1/2". 677908 Copper Capillary Solder Ring Male Taper Adaptor 15mm x 1/2". 677907 Copper Capillary Solder Ring Male Taper Adaptor 22mm x 3/4". 677898 Copper Capillary Solder Ring Female Adaptor 15mm x 1/2". 677090 Copper Capillary Solder Ring Female Adaptor 22mm x 3/4".

Approval Holder:

City Plumbing Supplies Holdings Ltd.

Company Name

City Plumbing Supplies Holdings Ltd.

Address

Highbourne House, Eldon Way, Crick

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

View All Listings by this Company

Type ‘J’ range of plate heat exchangers with stainless steel (AISI 304L or AISI 316L) fin and end plates. Maximum working pressure 3.0 bar (primary circuit) and 10.0 bar (secondary circuit). Maximum operating temperature 80°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) Primary circuit. ½” BSP (M) Sanitary circuit.

Marking:

Condevo S.p.A. and model on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Type ‘J’ range comprising of: PP10FJX. PP12FJX. PP14FJX. PP16FJX. PP18FJX. PP20FJX. PP22FJX. PP24FJX. PP26FJX. PP28FJX. PP30FJX. PP32FJX. PP34FJX. X denotes the body material and is replaced with: 4 = AISI304L 6 = AISI316L

Approval Holder:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Range of copper brazed, stainless steel (316) heat exchangers in various sizes (4-300 plates, see models). Maximum working pressure: see models. Maximum operating temperature: 99°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” - 3” BSP (M).

Marking:

SWEP, models, PN and tech info on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

X8T-SC-S - Number or Plates: MIN 4 – MAX 60, Max Flow rate – 4 m3/h - ½”, ¾” - 32/26bar. 10T-SC-M - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 9 m3/h - 3/8” to 1 ¼” - 41/36bar. 15T-SC-M - Number or Plates: MIN 4 – MAX 60, Max Flow rate – 4 m3/h - ½” to 1” - 45/45bar. 16DW-SC-S - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 11,3 m3/h ½” to 1 ¼” - 16/16bar. 16DW-SC-M - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 11,3 m3/h - ½” to 1 ¼” - 45/45bar. 220-SC-S - Number or Plates: MIN 4 – MAX 300, Max Flow rate – 39 m3/h 1” to 2 ½” -25/25bar. 320HT-SC-S - Number or Plates: MIN 4 – MAX 300, Max Flow rate – 61,7 m3/h - 1 ½” to 2 ½” - 33/29bar. 320LT-SC-S - Number or Plates: MIN 4 – MAX 260, Max Flow rate – 76,2 m3/h - 1 ½” to 3” - 25/25bar.

Approval Holder:

SWEP International AB

Company Name

SWEP International AB

Address

Järvgatan 3B, Box 105, 26122 Landskrona

Country

Sweden

View All Listings by this Company

Manufacturer:

SWEP International AB/SWEP Slovakia s.r.o.

Company Name

SWEP International AB/SWEP Slovakia s.r.o.

Address

Box 105, 26122, Landskrona

Country

Sweden

Phone

+46 418400406

View All Listings by this Company

Range of electronically controlled heat interface units (HIU) with a stainless-steel plate heat exchanger providing space heating and instantaneous hot water. The domestic hot water (secondary) circuit incorporates a pressure relief valve (set at 10.0 bar). The inlets and outlets of all circuits incorporate a T-handled spherical valve. Maximum working pressures: 10.0 bar (Primary circuit), 9.5 Bar (Secondary circuit). Maximum operating temperature 95°C. Cold supply only.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

260102725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

IRN R511 applies to all spherical valves that can be used for draining the system down.

Size:

1½” BSP (M).

Marking:

Oventrop Logo on body.

Installation Requirements:

R001 R140 R360 R511

Expiry date:

31/01/2031

Proviso:

Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with Schedule 2 paragraph 7 of the Water Supply (Water Fittings) Regulations 1999.

Model:

1681580 - Requmaq X-80, 1681480 - Requmaq X-70.

Approval Holder:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Huba Control logo and technical info on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Type 520: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 7/16"-20 UNF, sealed at front ISO 11926-1 Male G1/4", sealed at front, Female 1/2"-14 NPT, thread sealing, Male 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/8", sealed at front, Male G1/4", sealed at back without sealing groove, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/4", sealed at front, Female G1/4", sealed at front + Manometer, Male G1/4", sealed at back DIN 3852-2, Male R1/4", thread sealing EN 10226, Male G1/2", sealed at front, Male M20x1.5, sealed at front + Manometer, Male 7/16"-20 UNF, sealing cone with schrader, Female Type 522: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/2", sealed at front, Male G1/2", sealed at front + Manometer, Male M20x1.5, sealed at front + Manometer, Male Type 540: Dimension, Sealing type, Male/Female Thread G1/4", sealed at front, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male R1/4", thread sealing EN 10226, Male Additional Information The pressure orifice and the connectors are all made from stainless steel X2CrNiMo17-12-2/1.4404 / AISI316L. The Schrader is made from Stainless X8CrNi18-9/1.4305/303 All variants can use the following pressure cell options, based on application requirements: -1…9 Bar / 0…2.5 - 100 bar (Stainless Steel Cell X6Cr17-1.4016) The only difference between the models 520, 522 & 540 is the input and output signal, and the approvals (not relevant to WRAS) All the different type variants can be given a unique customer article number, to trace the full specification: Example: 520.99XXX 520 = Model Type 99 = Client / project specific number XXX = Unique file for client containing all the above options specified within model.

Manufacturer:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Range of flanged ball type non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron balls, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

260115704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This device does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.

Size:

DN80-DN500 flanged.

Marking:

KSB logo, KSB, model, DN, PN, material and production date (MM/YYYY) on data plate on body. DN, PN, KSB and flow arrow on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

ECOLINE RPL.

Approval Holder:

KSB Valves (Changzhou) Co., Ltd.

Company Name

KSB Valves (Changzhou) Co., Ltd.

Address

Environment Protection Industrial Park, Xinbei District, 68 Huanbao Four Road, 213022 Changzhou, Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

KSB Valves (Changzhou) Co., Ltd.

Company Name

KSB Valves (Changzhou) Co., Ltd.

Address

No.68 Huanbao Four Road, Xinbei District, Changzhou, Jiangsu Province

Country

China

View All Listings by this Company

Range of rotary vane pumps with either brass, stainless-steel or plastic bodies, stainless steel impellor and EPDM ‘O’ rings. Maximum working pressure 20 Bar. Cold water use.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260202701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Fluid-o-tech, Fluid-o-tech logo, model on label on body, Fluid-o-tech logo, flow arrow on body.

Installation Requirements:

R001

Expiry date:

28/02/2031

Model:

20 SERIES - BRASS VERSION TW030, TW031, TW034, TW034Z, TW050, TW051, TW054, TW054Z, TW070, TW071, TW074, TW074Z, TW100, TW101, TW104, TW104Z, TW150, TW151, TW154, TW154Z, TW180, TW181, TW184, TW184Z, TW200, TW201, TW204, TW204Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 20 SERIES - PLASTIC VERSION TWEP031, TWEP034, TWEP051, TWEP054, TWEP071, TWEP074, TWEP101, TWEP104, TWEP151, TWEP154, TWEP181, TWEP184, TWEP201, TWEP204, TWEP231, TWEP234 QUICK CONNECTION Ø14.5 MM 20 SERIES – INOX VERSION TW0310, TW0311, TW0314, TW0314Z, TW0510, TW0511, TW0514, TW0514Z, TW0710, TW0711, TW0714, TW0714Z, TW110, TW111, TW114, TW114Z, TW1510, TW1511, TW1514, TW1514Z, TW1810, TW1811, TW1814, TW1814Z, TW210, TW211, TW214, TW214Z, TW2310, TW2311, TW2314, TW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 22 SERIES - BRASS VERSION PW070, PW070X, PW070F, PW070FX, PW071, PW071X, PW071F, PW071FX, PW074, PW074X, PW074F, PW074FX, PW074Z, PW074XZ, PW074FZ, PW074FXZ, PW100, PW100F, PW100X, PW100FX, PW101, PW101X, PW101F, PW101FX, PW104, PW104Z, PW104X, PW104XZ, PW104F, PW104FZ, PW104FX, PW104FXZ, PW150, PW150X, PW150F, PW150FX, PW151, PW151X, PW151F, PW151FX, PW154, PW154Z, PW154X, PW154XZ, PW154F, PW154FZ, PW154FX, PW154FXZ, PW200, PW200X, PW200F, PW201, PW201X, PW201F, PW201FX, PW204, PW204Z, PW204X, PW204XZ, PW204F, PW204FZ, PW204FX, PW204FXZ, PW250, PW250F, PW250X, PW254X, PW254XZ, PW254F, PW254FZ, PW254FX, PW254FXZ, PW300, PW300X, PW300F, PW300FX, PW301, PW301X, PW301F, PW301FX, PW304, PW304Z, PW304X, PW304XZ, PW304F, PW304FZ, PW304FX, PW304FXZ, PW350, PW350F, PW350X, PW350FX, PW351, PW351X, PW351F, PW351FX, PW354, PW354Z, PW354X, PW354XZ, PW354F, PW354FZ, PW354FX, PW354FXZ, PW400, PW400F, PW400X, PW400FX, PW401, PW401X, PW401F, PW401FX, PW404, PW404Z, PW404X, PW404XZ, PW404F, PW404FZ, PW404FX, PW404FXZ, RW070, RW070X, RW070F, RW070FX, RW071, RW071X, RW071F, RW071FX, RW074, RW074X, RW074F, RW074FX, RW074Z, RW074XZ, RW074FZ, RW074FXZ, RW100, RW100F, RW100X, RW100FX, RW101, RW101X, RW101F, RW101FX, RW104, RW104Z, RW104X, RW104XZ, RW104F, RW104FZ, RW104FX, RW104FXZ, RW150, RW150X, RW150F, RW150FX, RW151, RW151X, RW151F, RW151FX, RW154, RW154Z, RW154X, RW154XZ, RW154F, RW154FZ, RW154FX, RW154FXZ, RW200, RW200X, RW200F, RW201, RW201X, RW201F, RW201FX, RW204, RW204Z, RW204X, RW204XZ, RW204F, RW204FZ, RW204FX, RW204FXZ, RW250, RW250F, RW250X, RW250FX, RW251, RW251X, RW251F, RW251FX, RW254, RW254Z, RW254X, RW254XZ, RW254F, RW254FZ, RW254FX, RW254FXZ, RW300, RW300X, RW300F, RW300FX, RW301, RW301X, RW301F, RW301FX, RW304, RW304Z, RW304X, RW304XZ, RW304F, RW304FZ, RW304FX, RW304FXZ, RW350, RW350F, RW350X, RW350FX, RW351, RW351X, RW351F, RW351FX, RW354, RW354Z, RW354X, RW354XZ, RW354F, RW354FZ, RW354FX, RW354FXZ, RW400, RW400F, RW400X, RW400FX, RW401, RW401X, RW401F, RW401FX, RW404, RW404Z, RW404X, RW404XZ, RW404F, RW404FZ, RW404FX, RW404FXZPW250FX, PW251, PW251X, PW251F, PW251FX, PW254, PW254Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 22 SERIES – INOX VERSION PW0710, PW0710X, PW0710F, PW0710FX, PW0711, PW0711X, PW0711F, PW711FX, PW0714, PW0714Z, PW0714X, PW0714XZ, PW0714F, PW0714FZ, PW0714FX, PW0714FXZ, PW110, PW110X, PW110F, PW110FX, PW111, PW111X, PW111F, PW111FX, PW114, PW114Z, PW114X, PW114XZ, PW114F, PW114FZ, PW114FX, PW114FXZ, PW1510, PW1510X, PW1510F, PW1510FX, PW1511, PW1511X, PW1511F, PW1511FX, PW1514, PW1514Z, PW1514X, PW1514XZ, PW1514F, PW1514FZ, PW1514FX, PW1514FXZ, PW210, PW210X, PW210F, PW210FX, PW211, PW211X, PW211F, PW211FX, PW214, PW214Z, PW214X, PW214XZ, PW214F, PW214FZ, PW214FX, PW214FXZ, PW2510, PW2510X, PW2510F, PW2510FX, PW2511, PW2511X, PW2511F, PW2511FX, PW2514, PW2514Z, PW2514X, PW2514XZ, PW2514F, PW2514FZ, PW2514FX, PW2514FXZ, PW310, PW310X, PW310F, PW310FX, PW311, PW311X, PW311F, PW311FX, PW314, PW314Z, PW314X, PW314XZ, PW314F, PW314FZ, PW314FX, PW314FXZ, PW3510, PW3510X, PW3510F, PW3510FX, PW3511, PW3511X, PW3511F, PW3511FX, PW3514, PW3514Z, PW3514X, PW3514XZ, PW3514F, PW3514FZ, PW3514FX, PW3514FXZ, PW410, PW410X, PW410F, PW410FX, PW411, PW411X, PW411F, PW411FX, PW414, PW414Z, PW414X, PW414XZ, PW414F, PW414FZ, PW414FX, PW414FXZ, RW0710, RW0710X, RW0710F, RW0710FX, RW0711, RW0711X, RW0711F, RW711FX, RW0714, RW0714Z, RW0714X, RW0714XZ, RW0714F, RW0714FZ, RW0714FX, RW0714FXZ, RW110, RW110X, RW110F, RW110FX, RW111, RW111X, RW111F, RW111FX, RW114, RW114Z, RW114X, RW114XZ, RW114F, RW114FZ, RW114FX, RW114FXZ, RW1510, RW1510X, RW1510F, RW1510FX, RW1511, RW1511X, RW1511F, RW1511FX, RW1514, RW1514Z, RW1514X, RW1514XZ, RW1514F, RW1514FZ, RW1514FX, RW1514FXZ, RW210, RW210X, RW210F, RW210FX, RW211, RW211X, RW211F, RW211FX, RW214, RW214Z, RW214X, RW214XZ, RW214F, RW214FZ, RW214FX, RW214FXZ, RW2510, RW2510X, RW2510F, RW2510FX, RW2511, RW2511X, RW2511F, RW2511FX, RW2514, RW2514Z, RW2514X, RW2514XZ, RW2514F, RW2514FZ, RW2514FX, RW2514FXZ, RW310, RW310X, RW310F, RW310FX, RW311, RW311X, RW311F, RW311FX, RW314, RW314Z, RW314X, RW314XZ, RW314F, RW314FZ, RW314FX, RW314FXZ, RW3510, RW3510X, RW3510F, RW3510FX, RW3511, RW3511X, RW3511F, RW3511FX, RW3514, RW3514Z, RW3514X, RW3514XZ, RW3514F, RW3514FZ, RW3514FX, RW3514FXZ, RW410, RW410X, RW410F, RW410FX, RW411, RW411X, RW411F, RW411FX, RW414, RW414Z, RW414X, RW414XZ, RW414F, RW414FZ, RW414FX, RW414FXZ QUICK CONNECTION Ø14.5 MM 24 SERIES - BRASS VERSION CW031, CW034, CW034Z, CW051, CW054, CW054Z, CW071, CW074, CW074Z, CW101, CW104, CW104Z, CW151, CW154, CW154Z, CW181, CW184, CW184Z, CW201, CW204, CW204Z, CW231, CW234, CW234Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 24 SERIES - INOX VERSION CW0311, CW0314, CW0314Z, CW0511, CW0514, CW0514Z, CW0711, CW0714, CW0714Z, CW111, CW114, CW114Z, CW1511, CW1514, CW1514Z, CW1811, CW1814, CW1814Z, CW211, CW214, CW214Z, CW2311, CW2314, CW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 26 SERIES - BRASS VERSION MW030, MW031, MW034, MW034Z, MW050, MW051, MW054, MW054Z, MW070, MW071, MW074, MW074Z, MW100, MW101, MW104, MW104Z, MW150, MW151, MW154, MW154Z, MW180, MW181, MW184, MW184Z, MW200, MW201, MW204, MW204Z, MW230, MW231, MW234, MW234Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 26 SERIES – INOX VERSION MW0310, MW0311, MW0314, MW0314Z, MW0510, MW0511, MW0514, MW0514Z, MW0710, MW0711, MW0714, MW0714Z, MW110, MW111, MW114, MW114Z, MW1510, MW1511, MW1514, MW1514Z, MW1810, MW1811, MW1814, MW1814Z, MW210, MW211, MW214, MW214Z, MW2310, MW2311, MW2314, MW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 28 SERIES - BRASS VERSION PW500, PW500F, PW501, PW501F,, PW504, PW504F, PW600, PW600F, PW601, PW601F,, PW604, PW604F, PW700, PW700F, PW701, PW701F, PW704, PW704F, PW800, PW800F, PW801, PW801F,PW804, PW804F, PW900, PW900F, PW901, PW901F, PW904, PW904F, PW1000, PW1000F, PW1001, PW1001F, PW1004, PW1004F 1/2” BSP F inlet/outlet or 1/2” NPT F inlet/outlet 28 SERIES – INOX VERSION PW510, PW510F, PW511, PW511F, PW514, PW514F, PW610, PW610F, PW611, PW611F, PW614, PW614F, PW710, PW710F, PW711, PW711F, PW714, PW714F, PW810, PW810F, PW811, PW811F, PW814, PW814F, PW910, PW910F, PW911, PW911F, PW914, PW914F, PW1010, PW1010F, PW1011, PW1011F, PW1014, PW1014F 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 31 SERIES - BRASS VERSION TSFROT070AW, TSFROT071AW, TSFROT074AW, TSFROT100AW, TSFROT101AW, TSFROT104AW, TSFROT150AW, TSFROT151AW, TSFROT154AW, TSFROT200AW, TSFROT201AW, TSFROT204AW, TSFROT250AW, TSFROT251AW, TSFROT254AW, TSFROT300AW, TSFROT301AW, TSFROT304AW, TSFROT350AW, TSFROT351AW, TSFROT354AW, TSFROT400AW, TSFROT401AW, TSFROT404AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 31 SERIES – INOX VERSION TSFRSS070AW, TSFRSS071AW, TSFRSS074AW, TSFRSS100AW, TSFRSS101AW, TSFRSS104AW, TSFRSS150AW, TSFRSS151AW, TSFRSS154AW, TSFRSS200AW, TSFRSS201AW, TSFRSS204AW, TSFRSS250AW, TSFRSS251AW, TSFRSS254AW, TSFRSS300AW, TSFRSS301AW, TSFRSS304AW, TSFRSS350AW, TSFRSS351AW, TSFRSS354AW, TSFRSS400AW, TSFRSS401AW, TSFRSS404AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 32 SERIES - BRASS VERSION TMFROT030AW, TMFROT031AW, TMFROT034AW, TMFROT050AW, TMFROT051AW, TMFROT054AW, TMFROT070AW, TMFROT071AW, TMFROT074AW, TMFROT100AW, TMFROT101AW, TMFROT104AW, TMFROT150AW, TMFROT151AW, TMFROT154AW, TMFROT180AW, TMFROT181AW, TMFROT184AW, TMFROT200AW, TMFROT201AW, TMFROT204AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 32 SERIES – INOX VERSION TMFRSS030AW, TMFRSS031AW, TMFRSS034AW, TMFRSS050AW, TMFRSS051AW, TMFRSS054AW, TMFRSS070AW, TMFRSS071AW, TMFRSS074AW, TMFRSS100AW, TMFRSS101AW, TMFRSS104AW, TMFRSS150AW, TMFRSS151AW, TMFRSS154AW, TMFRSS180AW, TMFRSS181AW, TMFRSS184AW, TMFRSS200AW, TMFRSS201AW, TMFRSS204AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 33 SERIES - BRASS VERSION TW500, TW501, TW504, TW600, TW601, TW604, TW700, TW701, TW704, TW800, TW801, TW804, TW900, TW901, TW904, TW1000, TW1001, TW1004 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 33 SERIES – INOX VERSION TW510, TW511, TW514, TW610, TW611, TW614, TW710, TW711, TW714, TW810, TW811, TW814, TW910, TW911, TW914, TW1010, TW1011, TW1014 1/2” BSP F inlet/outlet or 1/2” NPT F inlet/outlet 34 SERIES – INOX VERSION TW310, TW311, TW314, TW410, TW0411, TW0414 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet

Approval Holder:

Fluid-o-Tech

Company Name

Fluid-o-Tech

Address

Via Leonardo Da Vinci, 40 20094 - Corsico (Milano) Italy

View All Listings by this Company

Manufacturer:

Fluid-o-Tech

Company Name

Fluid-o-Tech

Address

Via Leonardo Da Vinci, 40 20094 - Corsico (Milano) Italy

View All Listings by this Company

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/01/2031

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck Mounted Capable of Achieving AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005

Expiry date:

31/01/2031

Approval Holder:

LECICO Plc.

Company Name

LECICO Plc.

Address

2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD

Postcode

MK410QB

General Email

jrichards@lecico.co.uk

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

260402002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

‘Justlink’ (brand of Yuhuan Jianglin Plumbing Hose & Parts Inc.), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2031

Model:

JL–A*B–XX–D–E–XXX. Where: A*B denotes connection size and type and can be replaced with any of the following options under each DN size (see below). XX denotes bore diameter of hose and can be replaced with any of the following: 06 = DN6, 08 = DN8, 10 = DN10, 13 = DN13, 19 = DN19. D denotes the outer braided material: SS = stainless steel wire SN = stainless steel wire plus black nylon wire N = Nylon wire E denotes the liner material: 0 = EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number, as examples: 015 = 15cm length, 100 = 100cm length, 200 = 200cm length. Size Codes: DN6 (denoted by 06) bore diameter available with the following end connections: 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 26 = F15, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring. DN8 (denoted by 08) bore diameter available with the following end connections: 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN10 (denoted by 10) bore diameter available with the following end connections: 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN13 (denoted by 13) bore diameter available with the following end connections: 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 37 = 15mm pushfit, 38 = 22mm pushfit, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN19 (denoted by 19) bore diameter available with the following end connections: 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 19 = M8*(12-110) with single O-ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 32 = 22mm compression, 34 = 22mm compression isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve.

Product Images

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of concealed flow controls (brass body with various finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

260102015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Outlet hose must be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

½” captive nut end connections.

Marking:

Vola on operating member

Installation Requirements:

R001 R007 R009 R010 R040

Expiry date:

31/01/2031

Model:

VOLA BK2, VOLA BK2A & VOLA BK2B VOLA BK2 – Mixer with Adjustable Bracket and water collection box VOLA BK2A – Mixer with Bracket VOLA BK2B – Mixer Alone Models with Brass and Stainless Steel operating members. Brass and Stainless Steel handles are available with different surface finishes. Suffix in the end of the product name indicate the surface finish and denotes: For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper. For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed Copper, B69=Brushed Silver, B70=Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Model:

RNDSCBV2.MB AQ150BAR2 300RSC TWBAR2.21 AQ150BAR2.MB TS150BAR2 126HP 126HP.MB AQSQBAR2 TSSQBAR2 408HP 300SSC AQSQBAR2.MB

Notes & Further Information

The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

Phone

0086-19527590441

General Email

carina07@126.com

View All Listings by this Company

Range of gate valves with blue epoxy coated ductile iron bodies and EPDM wedges. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

240402093

Size:

DN40, 50, 60, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600 flanged inlet and outlet.

Marking:

T.I.S, size, PN and product info on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

A20-29-PN10/16 Series 14/15 BS5163 type A/B

Approval Holder:

T.I.S Service SpA

Company Name

T.I.S Service SpA

Address

Via Lago d'Iseo 4/6 24060 Bolgare (Bergamo) Italy

View All Listings by this Company

Range of gate valves incorporating blue epoxy coated ductile iron bodies. EPDM coated ductile iron wedges and a non-rising spindle headwork. Some models incorporate a bypass. Maximum working pressure 16.0 bar. Maximum operating temperature 45°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

260188006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

AVK, PN and DN on both the body and label on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

2105035#140069 2108035#140069 2110035#140069 2115035#140069 2120035#140069 2125035#140069 2130035#140069 2135035#140069 2140035#140069 Where # is: 2 – Clockwise to close, fitted with BS 5163 stemcap (white insert) (All sizes) 3 - Clockwise to open, fitted with BS 5163 stemcap (red insert) (All sizes) G – Clockwise to close, fitted with BS 5163 stemcap (white insert), Bypass fitted (DN350+400 ONLY) H - Clockwise to open, fitted with BS 5163 stemcap (red insert), Bypass fitted (DN350+400 ONLY)

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Manufacturer:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

‘Safecure Super’. White coloured, spray applied SBR latex solution intended to act as a concrete curing membrane. Apply as per manufacturer`s 'Tech Data Sheet no. 306', 'Revision no. v4', dated '02.01.2026'. Cure for 14 days at 25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5057 Concrete, Cement and Mortar

Section Subtitle:

Curing compounds.

WRAS Approval Number:

260155016

Expiry date:

31/01/2031

Approval Holder:

Adomast Manufacturing Ltd.

Company Name

Adomast Manufacturing Ltd.

Address

Units 1 & 2 Barkston Road, Carlton Industrial Estate, Barnsley

Postcode

S71 3HU

View All Listings by this Company

'PPE HY3140GYellow' & 'PPE HY3140GBlack'. Yellow or black coloured, injection moulded PPE materials. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

260155026

Expiry date:

31/01/2031

Approval Holder:

Hunan Henyl Advanced Materials Co., Ltd.

Company Name

Hunan Henyl Advanced Materials Co., Ltd.

Address

Xianghong Industrical Park, Xinhua Economic and Technological Development Zone, Loudi City, Hunan 417600

Country

China

View All Listings by this Company

'Smart S-IRV'. Site applied, grey coloured, two-part (resin & hardener is automatically mixed in a 10:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 14/0141’, dated ‘29/11/2023’. For use with water up to 23°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 14/0104’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:

5311 Resin Anchors

Expiry date:

30/06/2030

Approval Holder:

PGB-Polska

Company Name

PGB-Polska

Address

Ul. Fryderyka Wilhelma Redena 3, 41-807 Zabrze

Country

Poland

View All Listings by this Company

‘Sika AnchorFix®-2+’. Site applied, grey coloured, two-part (resin & hardener is automatically mixed in a 10:1 volume ratio through dispensing nozzle) anchor resin. Apply and cure as per ’T Load’ cures set out in Table B4 of European Technical Assessment ‘ETA 14/0346’, dated ‘07/11/2025’. For use with water up to 23°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B4 of European Technical Assessment ‘ETA 14/0346’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:

5311 Resin Anchors

Expiry date:

30/06/2030

Approval Holder:

Sika Services AG

Company Name

Sika Services AG

Address

Tueffenwies 16, CH-8048 Zuerich

Country

Switzerland

Phone

+41 58 436 40 40

General Email

sika@sika.ch

View All Listings by this Company

Section:

0683 Combination Tap Assemblies

Description:

A Range of Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.

Deck Mounted with Filtered Water Capable of achieving AUK3 tap gap PEX lined stainless steel braided inlet hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

28/02/2031

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Section:

0531 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

Deck mounted. Capable of achieving AUK2 Tap gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005 R030

Expiry date:

31/01/2031

Model:

604587 X XXX

Notes & Further Information

X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Single lever type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0673 Combination Tap Assemblies

Description:

A Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.

Deck Mounted Stainless steel braided, EPDM lined interconnecting hoses. Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

31/01/2031

Notes & Further Information

** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Wall Mounted Some models incorporate wall outlets - See manufacturer’s instructions for model-specific details.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Approval Holder:

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Manufacturers:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Shower hose EPDM Liner and stainless steel outer finish. All shower handsets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Wall outlets on models JD 744 and JD 795 incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Notes & Further Information

The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Section:

1670 Shower Outlets

Description:

A Shower kit(s)

Wall mounted. Incorporates a check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturers:

Grohe AG

Wall Mounted Shower Outlets in various finishes. Open Outlet. Maximum operating temperature 60 °C

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

251212307

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Just Taps Plus logo in face plate

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

24212 CH, 23212 BBR, 27212 BBL, 28212 MB, 21212 BRZ, 32412 CH, 33412 BBR, 37412 BBL, 38412 MB & 31412 BRZ Shower outlets

Approval Holder:

Just Taps Plus UK Ltd

Company Name

Just Taps Plus UK Ltd

Address

Innovia House, Marish Wharf, St Mary's Rd, Langley

Postcode

SL3 6DA

Country

Berkshire

Phone

01895 44 22 11

General Email

info@jtpuk.co.uk

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

All models, except GR-LY-10C are concealed. Incorporates an approved check valve cartridge (however the complete assembly has not been fully tested to demonstrate it provides backflow protection).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Approval Holder:

Taizhou Guoren Thermostatic Sanitaryware Co., Ltd.

Company Name

Taizhou Guoren Thermostatic Sanitaryware Co., Ltd.

Address

No.108 Minhe Road, Zeguo Town, Wenling City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Guoren Thermostatic Sanitaryware Co., Ltd.

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Brass body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/03/2031

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

QIANPAI VILLAGE, CHUMEN TOWN YUHUAN CITY, ZHEJIANG PROVINCE

Postcode

31760,

Country

CHINA

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD