Range of Talbot pushfit fittings with polyprolylene or acetal bodies and EPDM o-rings for use with MDPE PE80 pipe (BS EN 12201). For use above and below ground use. Maximum working pressure 16 bar. Cold water use only.
‘DELBRAZE’ range of copper and copper alloy braze fittings for use with copper pipe (EN1057). Maximum working pressure: 16 bar. Maximum working temperature: 85°C.
Single flush WC outlet valves with an ABS plastic body (WC01), operated via a mains powered infra red sensor assembly (WC03). Cold water use only.
Range of syphonic flush valves with plastic bodies. Cold water only
WC dual flush valve with a plastic body, operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating temperature – Cold water use only.
Range of manually operated and sensor operated dual flush WC outlet valves. Cold water use only.
Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.
Range of plate heat exchangers with stainless steel plate bodies and copper brazing. Maximum working pressure: 45 Bar. Maximum operating temperature: 99 °C.
‘MJ-SDC plus’ range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate plastic filters. Maximum working pressure 16 Bar. Maximum operating temperature 50°C.
‘Wesan WP’ range of water meters with black epoxy coated cast iron bodies, plastic impellers and EPDM ‘O’-rings and seal. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic in-line water meters with brass bodies, inlets incorporating plastic strainers. Model (MA408 – DN25) incorporates a non-return valve (not suitable for backflow prevention) at the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meter manifolds with brass or DZR brass bodies. The outlets incorporate non-return valves (not suitable for backflow protection). For use with copper pipe manufactured to BS EN 1057 (WBBADAPT112). Maximum working pressure 10.0 bar. Cold water use only.
Range of (below ground) water meter manifolds (gunmetal bodies), meter carriers (DZR brass bodies) and stopcock carriers (gunmetal bodies). All meter carriers incorporate a non-return valve. All manifold ports and the stopcock carriers incorporate a non-rising spindle stopcock with a T shaped operating member. Maximum working pressure: 16.0°C Cold water use only.
Threaded adapter with plastic body. Maximum working pressure 12.5 bar. Cold water use only.
Isolation valve, stainless-steel braided EPDM lined flexible hose assembly and a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). For use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of vertical multistage pumps with either stainless-steel bodies or cast-iron bodies with a black epoxy powder coating, stainless-steel impellers, shaft and outer sleeve, EPDM ‘O’-rings and a silicon carbide + EPDM shaft seal. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.
Range of cold water supply booster sets, incorporating stainless steel manifold system connecting 2 or 3 wholesome water pumps. The set also includes spherical valves, non-return valves (not intended or suitable for backflow protection) and expansion vessels. Maximum working pressure 10.0 bar. Cold water supply only.
Range of shower handsets with chrome plated bodies. Open outlet use only Maximum operating temperature 85°C
Wall mounted shower kit comprising of shower hose, handset, overhead shower and a riser rail assembly incorporating a shower to shower diverter valve, (available in various finishes).
Non-metallic materials and components comply with BS6920 at 65°C
‘Waterforms’ shower pipe riser rail with chromium plated brass body. Open outlet use only. Maximum operating temperature 60°C.
Range of shower handsets with plastic bodies (chrome plated). Maximum operating temperature 65°C.
Range of shower outlets with plastic bodies available in white or chromium finishes. Model 2.1605.154 (1867.012) is supplied with a shower hose. Open outlet use only. Maximum operating temperature 55°C.
Range of electronic steaming ovens with flow controlled via solenoid valve. Maximum working pressure 6 Bar Cold water use
Range of brass bodied Y-strainers incoproating stainless steel strainer. Maximum operating pressure 20 bar. Maximum operating temperature 85°C
Range of ‘Y’- pattern strainers with brass bodies incorporating stainless steel filters and EPDM ‘O’-rings. M profile press connection to be used with copper pipe EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of pillar taps (chromium plated brass), incorporating non-rising spindle headworks with various operating members (see model). The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. BS6920 65°C.
Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc (VL102 & POR102) and single lever operating member or non-rising spindle headworks (all other models) with dome or cross top operating members and metal back nuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 Bar. Non-metallic materials and components comply with BS6920 at 65°C
Self-closing basin tap (chromium plated brass), incorporating a self-closing headwork with dome type operating memeber. Temperature is controlled independently by a manual lever. Spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete assembly has not been tested to demonstrate backflow protection.. Maximum working pressure 10.0 bar.
Range of PEX or PVC lined interlocked shower hoses (chrome plated) incorporating a stainless steel EPDM strainer washers or EPDM washers. Maximum operating temperature 85.0°C (PEX models) or 65.0°C (PVC models).
Range of plastic shower hoses with a PEX inner liner and external PVC outer in various finishes (see model). Maximum operating temperature 65°C.
Range of stainless steel interlocked shower hoses with PVC inner liner and EPDM gaskets and stainless steel strainers.
Non-metallic materials and components comply with BS6920 at 65°C
Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.
Wall mounted, one or two hole, concealed blending valves with a brass body, incorporating a ceramic cartridge headwork. Maximum working pressure 3.5 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Self-closing shower mixer (chromium plated brass) incorporating spring loaded non-concussive headworks with dome type operating member. Temperature is adjusted manually with a dome type operating member. Both inlets and the shower outlet incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection). The inlets also incorporate a stainless steel strainer. Shower hose, handset or headset are not supplied supplied with this product. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed or exposed (see models) thermostatic shower valves (chromium plated brass), incorporating a ceramic disc headwork controlling the flow and an independent thermostatic cartridge controlling the temperature, both with single lever type operating members. The temperature control incorporates a manual override. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted concealed two and three hole thermostatic shower valves with brass bodies. Incorporating two-way diverter valves. Model (V132-IS-XX) also incorporates a quarter turn ceramic disc headwork. Temperature is controlled independently via a thermostatic cartridge. The products incorporate single check valve cartridges, (however, the complete products have not been fully tested to demonstrate it provides backflow protection). Maximum operating pressure 10.0 bar.
Range of wall mounted concealed and exposed thermostatic shower valves, (chrome plated brass bodies or chrome trim sets), incorporating single sequential headworks controlling both the flow and temperature. The inlets incorporate single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with flow regulators. Maximum operating pressure 5.0 bar. Maximum operating temperature 50°C
Range of MIRA MODE high pressure or pumped, wall fed or ceiling fed bath/shower mixing valves supplied with overhead shower and shower handsets. Inlets are supplied with isolation valves. Maximum working pressure 5 bar for high pressure models and 1 bar for pumped models. Non-metallic materials and components comply with BS6920 at 48°C.
Wall mounted, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using single lever operating members incorporating a manual override. The temperature is controlled independently via a thermostatic cartridge, using a single lever operating member incorporating a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. Compression fitting connection to be used with copper pipe to BS EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models CORETMV015MX & CORETMV022MX both 60°C
Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products consist of two-way diverter cartridges and a thermostatic cartridges. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted thermostatic bar shower mixers, (chrome plated brass bodies), incorporating half turn ceramic disc headwork with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. The products are supplied with shower kits that consist of a shower hose, handset and riser rail assembly. Maximum working pressure 10.0Bar Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated, ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of wafer and lugged butterfly valves with blue epoxy coated ductile iron bodies and stainless steel disc. DN50-DN300 are lever operated and DN350 – DN600 are handwheel operated. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of butterfly valves incorporating blue epoxy coated ductile iron bodies and discs, incorporating EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of double flanged, handwheel operated butterfly valves with blue epoxy coated ductile iron bodies, incorporating either stainless-steel or blue epoxy coated ductile iron discs and EPDM seals. Maximum working pressure 16.0 Bar (DN50 to DN300) or 10.0 Bar (DN350 to DN2000) Maximum operating temperature 23.0°C
Self-closing concealed shower valve assembly with (DZR) brass body incorporating a non-concussive headwork and dome type operating member (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted, self-closing shower valve assembly (chromium plated brass) with non-concussive headwork and dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Page 95 of 209
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
