Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass) bodies. The flow is controlled via a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a thermostatic cartridge. The products incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate a stainless-steel strainer. The products are supplied with spherical valves for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0685 Combination Tap Assembly

Section Subtitle:

Tap(s) with a non-touch method of flow control incorporating temperature control.

WRAS Approval Number:

250504028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” Male BSP.

Marking:

IDRAL on operating member. Model number and date (WW/YY) on underside of tap.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

09125/3R - WALL MOUNTED TAP (MAINS OPERATED) I90H1-01000 - WALL MOUNTED REMOVABLE SPOUT TAP (MAINS OPERATED) I90H1-00000 - WALL MOUNTED REMOVABLE SPOUT TAP (BATTERY OPERATED) 09125/3 - WALL MOUNTED TAP (BATTERY OPERATED)

Approval Holder:

Idral S.p.A.

Company Name

Idral S.p.A.

Address

Via Isei, 8/10 - I-28010 Gargallo (NO)

Country

Italy

Phone

+39 0322 912017

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall Mounted Concealed Two-way diverter

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

31/07/2030

Notes & Further Information

Product Identification with an * as suffix = models added 11/082025

Product Images

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Section:

2052 Diverter

Description:

A Range of Diverter(s) incorporating manual control

Plastic body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Product Images

Approval Holder:

Ningbo Wanhai Cartridge Technology Co. Ltd.

Company Name

Ningbo Wanhai Cartridge Technology Co. Ltd.

Address

Xiachen Development Zone, Chunhu, Fenghua

Country

Zhejiang, China

View All Listings by this Company

Manufacturers:

Ningbo Wanhai Cartridge Technology Co

Section:

0440 Headworks

Description:

A Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Brass body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Plastic body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Product Images

Approval Holder:

Guangdong Hent Technology Co., Ltd

Company Name

Guangdong Hent Technology Co., Ltd

Address

No. 28 Pingsha Dadao Pingsha Industrial Area, Zhishan Town Heshan City 529729 Guangdong

Country

China

View All Listings by this Company

Manufacturers:

Guangdong Hent Technology Co., Ltd.

Section:

0442 Thermostatic cartridges

Description:

A Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

Plastic body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Product Images

Approval Holder:

Ningbo Wanhai Cartridge Technology Co. Ltd.

Company Name

Ningbo Wanhai Cartridge Technology Co. Ltd.

Address

Xiachen Development Zone, Chunhu, Fenghua

Country

Zhejiang, China

View All Listings by this Company

Manufacturers:

Ningbo Wanhai Cartridge Technology Co

Range of single hole, single outlet (swivel) combination tap assemblies with (stainless steel bodies - various finishes), incorporating a ceramic cartridge headwork controlling the hot and cold with a single lever operating member. The boiling and purified water is controllied via a ceramic disc headwork incorporating a manual override button and a dome type headwork. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway: 98 °C; for other water pathway: 85 °C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240604039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Hot – Stainless steel braided PEX lined flexible hose assemblies incorporating a ½” BSP (F) captive nut end connection. Cold - Stainless steel braided PEX lined flexible hose assemblies incorporating a 3/8” BSP (F) captive nut end connection ½” (F) x 3/8” (M) x 3/8” (M) tee connector.

Marking:

Alfred Victoria "crown" brand marking on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2029

Model:

BOT01CR, BOT01K & BOT01BB BOT02CR, BOT02K & BOT02BB BOT03CR, BOT03K & BOT03BB BOT04CR, BOT04K & BOT04BB BOT05CR, BOT05K & BOT05BB BOT06CR, BOT06K & BOT06BB Suffix CR = Chrome, K = Black & BB = Zirconium gold brushed

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Section:

0470 Combination Tap Assemblies

Description:

A Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted. Stainless steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap. Supplied with a 15x15mm compression isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Concealed Supplied with an Inlet adaptor

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (brass body – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240402092

Size:

¾” BSP (M)

Marking:

ESTEEM on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2029

Model:

E61112 Brushed Brass E61109 Matt Black E61118 Brushed Brass E61115 Matt Black

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of deck mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator, and the product is supplied with shower hose and handset (with flow regulator) and metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

240402091

Size:

¾” BSP (M). Claims for flow rate, accuracy & working pressure by are made by the manufacturer and not considered part of the listing.

Marking:

ESTEEM on body.

Installation Requirements:

R001 R006 R020

Expiry date:

30/04/2029

Model:

E61113 Brushed Brass E61110 Matt Black E61119 Brushes Brass E61116 Matt Black

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

Section:

0530 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

Wall Mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Section:

0530 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

31/08/2030

Notes & Further Information

1）No Suffix-Chrome 2) -**Represents the following different surface treatments: 1.H = Black 2.DYB = Matte white 3.BZ = Perl white painted 4.HGTS = Red bronze 5.HTL = Yellow bronze brushed 6.Q = Bronze 7.QTSL = Bronze brushed bright 8.QTS = Bronze brushed matte 9.STS = Acid copper brushed 10.SDMGJ = Water plated rose gold 11.N = Nickel brushed bright light 12.NP = Nickel brushed 13.TJ = Titanium gold 14.TJLS = Titanium gold brushed 15.G = Gold 16.GJS = Gold brushed 17.GJSY = Zirconium gold wire drawing matte 18.PGJFY = Zirconium gold wire drawing matte bright light 19.PLSJ = Brushed gold 20.LSJY = Brushed gold matte 21.MGJ = Rose gold 22.MGJL = Rose gold brushed 23.DMGJ = Light rose gold brushed 24.HTS = Red bronze brushed 25.QHP = Grey 26.LSQH = Grey brushed 27.LHMGJ = Brushed yellow rose gold

Product Images

Approval Holder:

Ningbo Syton Testing & Technology Service Co., Ltd.

Company Name

Ningbo Syton Testing & Technology Service Co., Ltd.

Address

F5 No. 5 Building Zhongchuanghui No. 128 Jingyuan Road Ningbo

Postcode

315040

Country

China

Phone

0086‐574‐87042953

General Email

justine.yu@syton.com.cn

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Range of cylindrical or tubular expansion vessels with epoxy coated carbon steel bodies. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” or 1” BSP (M)

Marking:

Trade-Tec, size in L and technical information on adhesive label

Installation Requirements:

R001 R530

Expiry date:

30/06/2029

Model:

TRPVES08 TRPVES12 TRPVES19 TRPVES24 TRPVES35 TRPVES50 TRPVES80 TRPVES100

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of filling loop assemblies consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression or 15mm pushfit.

Marking:

Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

521726, 941192.

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

View All Listings by this Company

Range of M profile copper press fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404076

Size:

see models

Marking:

Brand name MAMBA, size, month/year & WRAS on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

MAMBA Range: STRAIGHT COUPLING CxC: 60111515 15mm PRESSFIT COUPLER 60112222 22mm PRESSFIT COUPLER 60112828 28mm PRESSFIT COUPLER 60113535 35mm PRESSFIT COUPLER 60114242 42mm PRESSFIT COUPLER 60115454 54mm PRESSFIT COUPLER SLIP COUPLING C x C: 60171515 15mm PRESSFIT SLIP COUPLER 60172222 22mm PRESSFIT SLIP COUPLER 60172828 28mm PRESSFIT SLIP COUPLER 60173535 35mm PRESSFIT SLIP COUPLER 60174242 42mm PRESSFIT SLIP COUPLER 60175454 54mm PRESSFIT SLIP COUPLER REDUCING COUPLING C x C: 60112215 22mm X 15mm PRESSFIT REDUCING COUPLER 60112815 28mm X 15mm PRESSFIT REDUCING COUPLER 60112822 28mm X 22mm PRESSFIT REDUCING COUPLER 60113515 35mm X 15mm PRESSFIT REDUCING COUPLER 60113522 35mm X 22mm PRESSFIT REDUCING COUPLER 60113528 35mm X 28mm PRESSFIT REDUCING COUPLER 60114215 42mm X 15mm PRESSFIT REDUCING COUPLER 60114222 42mm X 22mm PRESSFIT REDUCING COUPLER 60114228 42mm X 28mm PRESSFIT REDUCING COUPLER 60114235 42mm X 35mm PRESSFIT REDUCING COUPLER 60115415 54mm X 15mm PRESSFIT REDUCING COUPLER 60115422 54mm X 22mm PRESSFIT REDUCING COUPLER 60115428 54mm X 28mm PRESSFIT REDUCING COUPLER 60115435 54mm X 35mm PRESSFIT REDUCING COUPLER 60115442 54mm X 42mm PRESSFIT REDUCING COUPLER FITTING REDUCER F x C: 60132215 22mm X 15mm PRESSFIT FITTNG REDUCER 60132815 28mm X 15mm PRESSFIT FITTNG REDUCER 60132822 28mm X 22mm PRESSFIT FITTNG REDUCER 60133515 35mm X 15mm PRESSFIT FITTNG REDUCER 60133522 35mm X 22mm PRESSFIT FITTNG REDUCER 60133528 35mm X 28mm PRESSFIT FITTNG REDUCER 60134215 42mm X 15mm PRESSFIT FITTNG REDUCER 60134222 42mm X 22mm PRESSFIT FITTNG REDUCER 60134228 42mm X 28mm PRESSFIT FITTNG REDUCER 60134235 42mm X 35mm PRESSFIT FITTNG REDUCER 60135415 54mm X 15mm PRESSFIT FITTNG REDUCER 60135422 54mm X 22mm PRESSFIT FITTNG REDUCER 60135428 54mm X 28mm PRESSFIT FITTNG REDUCER 60135435 54mm X 35mm PRESSFIT FITTNG REDUCER 60135442 54mm X 42mm PRESSFIT FITTNG REDUCER 90DEG ELBOW C x C: 60411515 15mm PRESSFIT ELBOW 60412222 22mm PRESSFIT ELBOW 60412828 28mm PRESSFIT ELBOW 60413535 35mm PRESSFIT ELBOW 60414242 42mm PRESSFIT ELBOW 60415454 54mm PRESSFIT ELBOW 90DEG STREET ELBOW F x C: 60431515 15mm PRESSFIT STREET ELBOW 60432222 22mm PRESSFIT STREET ELBOW 60432828 28mm PRESSFIT STREET ELBOW 60433535 35mm PRESSFIT STREET ELBOW 60434242 42mm PRESSFIT STREET ELBOW 60435454 54mm PRESSFIT STREET ELBOW 45DEG ELBOW C x C: 60451515 15mm PRESSFIT OBTUSE ELBOW 60452222 22mm PRESSFIT OBTUSE ELBOW 60452828 28mm PRESSFIT OBTUSE ELBOW 60453535 35mm PRESSFIT OBTUSE ELBOW 60454242 42mm PRESSFIT OBTUSE ELBOW 60455454 54mm PRESSFIT OBTUSE ELBOW 45DEG STREET ELBOW F x C: 60481515 15mm PRESSFIT OBTUSE STREET ELBOW 60482222 22mm PRESSFIT OBTUSE STREET ELBOW 60482828 28mm PRESSFIT OBTUSE STREET ELBOW 60483535 35mm PRESSFIT OBTUSE STREET ELBOW 60484242 42mm PRESSFIT OBTUSE STREET ELBOW 60485454 54mm PRESSFIT OBTUSE STREET ELBOW CAP C x C: 60811515 15mm PRESSFIT STOP END 60812222 22mm PRESSFIT STOP END 60812828 28mm PRESSFIT STOP END 60813535 35mm PRESSFIT STOP END 60814242 42mm PRESSFIT STOP END 60815454 54mm PRESSFIT STOP END EQUAL TEE C x C: 60151515 15mm PRESSFIT TEE 60222222 22mm PRESSFIT TEE 60282828 28mm PRESSFIT TEE 60353535 35mm PRESSFIT TEE 60424242 42mm PRESSFIT TEE 60545454 54mm PRESSFIT TEE PART CROSSOVER F x C: 60271515 15mm PRESSFIT PART CROSSOVER 60272222 22mm PRESSFIT PART CROSSOVER CROSSOVER C x C: 60291515 15mm PRESSFIT FULL CROSSOVER 60292222 22mm PRESSFIT FULL CROSSOVER REDUCER ELBOW 60412215 22mm X 15mm PRESSFIT REDUCING ELBOW REDUCING TEE: 60221515 22mm X 15mm X 15mm PRESSFIT REDUCING TEE 60221522 22mm X 15mm X 22mm PRESSFIT REDUCING TEE 60282222 28mm X 22mm X 22mm PRESSFIT REDUCING TEE 60282228 28mm X 22mm X 28mm PRESSFIT REDUCING TEE 60222215 22mm X 22mm X 15mm PRESSFIT REDUCING TEE 60282815 28mm X 28mm X 15mm PRESSFIT REDUCING TEE 60282822 28mm X 28mm X 22mm PRESSFIT REDUCING TEE 60353515 35mm X 35mm X 15mm PRESSFIT REDUCING TEE 60353522 35mm X 35mm X 22mm PRESSFIT REDUCING TEE 60353528 35mm X 35mm X 28mm PRESSFIT REDUCING TEE 60424215 42mm X 42mm X 15mm PRESSFIT REDUCING TEE 60424222 42mm X 42mm X 22mm PRESSFIT REDUCING TEE 60424228 42mm X 42mm X 28mm PRESSFIT REDUCING TEE 60424235 42mm X 42mm X 35mm PRESSFIT REDUCING TEE 60545415 54mm X 54mm X 15mm PRESSFIT REDUCING TEE 60545422 54mm X 54mm X 22mm PRESSFIT REDUCING TEE 60545428 54mm X 54mm X 28mm PRESSFIT REDUCING TEE 60545435 54mm X 54mm X 35mm PRESSFIT REDUCING TEE 60545442 54mm X 54mm X 42mm PRESSFIT REDUCING TEE

Product Images

Approval Holder:

MDS Global Sourcing Ltd

Company Name

MDS Global Sourcing Ltd

Address

10 Alesbury Court Lapworth

Postcode

B94 6BE

Country

United Kingdom

Phone

07771 755057

General Email

scott@mdsgroup.co.uk

View All Listings by this Company

N·U Range of stainless steel (304S31/316S11) press fittings for use with N·U series 1 & 2 stainless steel (304S31/316S11) pipe. The fittings and tube are assembled using a crimping tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309386

Size:

⅜” - 4” BSPT (M). ⅜” - 4” BSPT (F). ½” - 2½” captive nut.

Marking:

Fittings: N·U Mech & model Pipe: N·U mech brand logo on pipe, size, 304S31 or 316S11 & EN10312

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Fittings: D15C-15 (15° elbow with plain ends): 15mm, D15C-18 (15° elbow with plain ends): 18mm, D15C-22 (15° elbow with plain ends): 22mm, D15C-28 (15° elbow with plain ends): 28mm, D15C-35 (15° elbow with plain ends): 35mm, D15C-42 (15° elbow with plain ends): 42mm, D15C-54 (15° elbow with plain ends): 54mm, D15C-76.1 (15° elbow with plain ends): 76.1mm, D15C-88.9 (15° elbow with plain ends): 88.9mm, D15C-108 (15° elbow with plain ends): 108mm, D30C-15 (30° elbow with plain ends): 15mm, D30C-18 (30° elbow with plain ends): 18mm, D30C-22 (30° elbow with plain ends): 22mm, D30C-28 (30° elbow with plain ends): 28mm, D30C-35 (30° elbow with plain ends): 35mm, D30C-42 (30° elbow with plain ends): 42mm, D30C-54 (30° elbow with plain ends): 54mm, D30C-76.1 (30° elbow with plain ends): 76.1mm, D30C-88.9 (30° elbow with plain ends): 88.9mm, D30C-108 (30° elbow with plain ends): 108mm, D45C-15 (45° elbow with plain ends): 15mm, D45C-18 (45° elbow with plain ends): 18mm, D45C-22 (45° elbow with plain ends): 22mm, D45C-28 (45° elbow with plain ends): 28mm, D45C-35 (45° elbow with plain ends): 35mm, D45C-42 (45° elbow with plain ends): 42mm, D45C-54 (45° elbow with plain ends): 54mm, D45C-76.1 (45° elbow with plain ends): 76.1mm, D45C-88.9 (45° elbow with plain ends): 88.9mm, D45C-108 (45° elbow with plain ends): 108mm, D60C-15 (60° elbow with plain ends): 15mm, D60C-18 (60° elbow with plain ends): 18mm, D60C-22 (60° elbow with plain ends): 22mm, D60C-28 (60° elbow with plain ends): 28mm, D60C-35 (60° elbow with plain ends): 35mm, D60C-42 (60° elbow with plain ends): 42mm, D60C-54 (60° elbow with plain ends): 54mm, D60C-76.1 (60° elbow with plain ends): 76.1mm, D60C-88.9 (60° elbow with plain ends): 88.9mm, D60C-108 (60° elbow with plain ends): 108mm, D75C-15 (75° elbow with plain ends): 15mm, D75C-18 (75° elbow with plain ends): 18mm, D75C-22 (75° elbow with plain ends): 22mm, D75C-28 (75° elbow with plain ends): 28mm, D75C-35 (75° elbow with plain ends): 35mm, D75C-42 (75° elbow with plain ends): 42mm, D75C-54 (75° elbow with plain ends): 54mm, D75C-76.1 (75° elbow with plain ends): 76.1mm, D75C-88.9 (75° elbow with plain ends): 88.9mm, D75C-108 (75° elbow with plain ends): 108mm, D90C-12 (90° elbow with plain ends): 12mm, D90C-15 (90° elbow with plain ends): 15mm, D90C-18 (90° elbow with plain ends): 18mm, D90C-22 (90° elbow with plain ends): 22mm, D90C-28 (90° elbow with plain ends): 28mm, D90C-35 (90° elbow with plain ends): 35mm, D90C-42 (90° elbow with plain ends): 42mm, D90C-54 (90° elbow with plain ends): 54mm, D90C-76.1 (90° elbow with plain ends): 76.1mm, D90C-88.9 (90° elbow with plain ends): 88.9mm, D90C-108 (90° elbow with plain ends): 108mm, DSQ-15 (Pipe bridge): 15mm, DSQ-18 (Pipe bridge): 18mm, DSQ-22 (Pipe bridge): 22mm, DSQ-28 (Pipe bridge): 28mm, DSQS-15 (Short pipe bridge): 15mm, DSQS-18 (Short pipe bridge): 18mm, DSQS-22 (Short pipe bridge): 22mm, DSQS-28 (Short pipe bridge): 28mm, DDGQ-12 (Single card pipe bridge): 12mm, DDGQ-15 (Single card pipe bridge): 15mm, DDGQ-18 (Single card pipe bridge): 18mm, DDGQ-22 (Single card pipe bridge): 22mm, DDGQ-28 (Single card pipe bridge): 28mm, D45-12 (45° elbow): 12mm, D45-15 (45° elbow): 15mm, D45-18 (45° elbow): 18mm, D45-22 (45° elbow): 22mm, D45-28 (45° elbow): 28mm, D45-35 (45° elbow): 35mm, D45-42 (45° elbow): 42mm, D45-54 (45° elbow): 54mm, D45-66.7 (45° elbow): 66.7mm, D45-76.1 (45° elbow): 76.1mm, D45-88.9 (45° elbow): 88.9mm, D45-108 (45° elbow): 108mm, D45D-12 (45° one-way elbow (long radius): 12mm, D45D-15 (45° one-way elbow (long radius): 15mm, D45D-18 (45° one-way elbow (long radius): 18mm, D45D-22 (45° one-way elbow (long radius): 22mm, D45D-28 (45° one-way elbow (long radius): 28mm, D45D-35 (45° one-way elbow (long radius): 35mm, D45D-42 (45° one-way elbow (long radius): 42mm, D45D-54 (45° one-way elbow (long radius): 54mm, D45D-66.7 (45° one-way elbow (long radius): 66.7mm, D45D-76.1 (45° one-way elbow (long radius): 76.1mm, D45D-88.9 (45° one-way elbow (long radius): 88.9mm, D45D-108 (45° one-way elbow (long radius): 108mm, D45DS-12 (45° one-way elbow (short radius): 12mm, D45DS-15 (45° one-way elbow (short radius): 15mm, D45DS-18 (45° one-way elbow (short radius): 18mm, D45DS-22 (45° one-way elbow (short radius): 22mm, D45DS-28 (45° one-way elbow (short radius): 28mm, D45DS-35 (45° one-way elbow (short radius): 35mm, D45DS-42 (45° one-way elbow (short radius): 42mm, D45DS-54 (45° one-way elbow (short radius): 54mm, D45DS-66.7 (45° one-way elbow (short radius): 66.7mm, D45DS-76.1 (45° one-way elbow (short radius): 76.1mm, D45DS-88.9 (45° one-way elbow (short radius): 88.9mm, D45DS-108 (45° one-way elbow (short radius): 108mm, D45R-22X18 (45° variable diameter elbow): 22X18mm, D90-12 (90° elbow): 12mm, D90-15 (90° elbow): 15mm, D90-18 (90° elbow): 18mm, D90-22 (90° elbow): 22mm, D90-28 (90° elbow): 28mm, D90-35 (90° elbow): 35mm, D90-42 (90° elbow): 42mm, D90-54 (90° elbow): 54mm, D90-66.7 (90° elbow): 66.7mm, D90-76.1 (90° elbow): 76.1mm, D90-88.9 (90° elbow): 88.9mm, D90-108 (90° elbow): 108mm, D90S-12 (90° elbow (short radius): 12mm, D90S-15 (90° elbow (short radius): 15mm, D90S-18 (90° elbow (short radius): 18mm, D90S-22 (90° elbow (short radius): 22mm, D90S-28 (90° elbow (short radius): 28mm, D90S-35 (90° elbow (short radius): 35mm, D90S-42 (90° elbow (short radius): 42mm, D90S-54 (90° elbow (short radius): 54mm, D90S-66.7 (90° elbow (short radius): 66.7mm, D90S-76.1 (90° elbow (short radius): 76.1mm, D90S-88.9 (90° elbow (short radius): 88.9mm, D90S-108 (90° elbow (short radius): 108mm, D90D-12 (90° one-way elbow (long radius): 12mm, D90D-15 (90° one-way elbow (long radius): 15mm, D90D-18 (90° one-way elbow (long radius): 18mm, D90D-22 (90° one-way elbow (long radius): 22mm, D90D-28 (90° one-way elbow (long radius): 28mm, D90D-35 (90° one-way elbow (long radius): 35mm, D90D-42 (90° one-way elbow (long radius): 42mm, D90D-54 (90° one-way elbow (long radius): 54mm, D90D-66.7 (90° one-way elbow (long radius): 66.7mm, D90D-76.1 (90° one-way elbow (long radius): 76.1mm, D90D-88.9 (90° one-way elbow (long radius): 88.9mm, D90D-108 (90° one-way elbow (long radius): 108mm, D90DS-12 (90° one-way elbow (short radius): 12mm, D90DS-15 (90° one-way elbow (short radius): 15mm, D90DS-18 (90° one-way elbow (short radius): 18mm, D90DS-22 (90° one-way elbow (short radius): 22mm, D90DS-28 (90° one-way elbow (short radius): 28mm, D90DS-35 (90° one-way elbow (short radius): 35mm, D90DS-42 (90° one-way elbow (short radius): 42mm, D90DS-54 (90° one-way elbow (short radius): 54mm, D90DS-66.7 (90° one-way elbow (short radius): 66.7mm, D90DS-76.1 (90° one-way elbow (short radius): 76.1mm, D90DS-88.9 (90° one-way elbow (short radius): 88.9mm, D90DS-108 (90° one-way elbow (short radius): 108mm, D90R-22X18 (90° variable diameter elbow): 22X18mm, D90R-28X18 (90° variable diameter elbow): 28X18mm, D90R-28X22 (90° variable diameter elbow): 28X22mm, D90R-35X22 (90° variable diameter elbow): 35X22mm, D90R-35X28 (90° variable diameter elbow): 35X28mm, D90R-42X22 (90° variable diameter elbow): 42X22mm, D90R-42X28 (90° variable diameter elbow): 42X28mm, D90R-42X35 (90° variable diameter elbow): 42X35mm, D90R-54X22 (90° variable diameter elbow): 54X22mm, D90R-54X28 (90° variable diameter elbow): 54X28mm, D90R-54X35 (90° variable diameter elbow): 54X35mm, D90R-54X42 (90° variable diameter elbow): 54X42mm, D90F-15-15 (90° elbow with female thread): 15-15mm, D90F-18-15 (90° elbow with female thread): 18-15mm, D90F-22-20 (90° elbow with female thread): 22-20mm, D90F-28-25 (90° elbow with female thread): 28-25mm, D90F-35-32 (90° elbow with female thread): 35-32mm, D90F-42-40 (90° elbow with female thread): 42-40mm, D90F-54-50 (90° elbow with female thread): 54-50mm, D90RF-15-10 (90° reducing elbow with female thread): 15-10mm, D90RF-22-15 (90° reducing elbow with female thread): 22-15mm, D90RF-28-15 (90° reducing elbow with female thread): 28-15mm, D90RF-28-20 (90° reducing elbow with female thread): 28-20mm, D90RF-35-15 (90° reducing elbow with female thread): 35-15mm, D90RF-35-25 (90° reducing elbow with female thread): 35-25mm, D90RF-42-32 (90° reducing elbow with female thread): 42-32mm, D90RF-54-40 (90° reducing elbow with female thread): 54-40mm, D90M-15-15 (90° external thread elbow): 15-15mm, D90M-18-15 (90° external thread elbow): 18-15mm, D90M-22-20 (90° external thread elbow): 22-20mm, D90M-28-25 (90° external thread elbow): 28-25mm, D90M-35-32 (90° external thread elbow): 35-32mm, D90M-42-40 (90° external thread elbow): 42-40mm, D90M-54-50 (90° external thread elbow): 54-50mm, D90RM-15-10 (90° reducing elbow with male thread): 15-10mm, D90RM-22-15 (90° reducing elbow with male thread): 22-15mm, D90RM-28-15 (90° reducing elbow with male thread): 28-15mm, D90RM-35-15 (90° reducing elbow with male thread): 35-15mm, D90RM-35-25 (90° reducing elbow with male thread): 35-25mm, D90RM-42-32 (90° reducing elbow with male thread): 42-32mm, D90RM-54-40 (90° reducing elbow with male thread): 54-40mm, D90FZ-15-15 (90° short elbow with female thread): 15-15mm, D90FZ-18-15 (90° short elbow with female thread): 18-15mm, D90FZ-22-20 (90° short elbow with female thread): 22-20mm, D90FZ-28-25 (90° short elbow with female thread): 28-25mm, D90FZ-35-32 (90° short elbow with female thread): 35-32mm, D90RFZ-15-20 (90° short structure variable diameter elbow): 15-20mm, D90RFZ-18-20 (90° short structure variable diameter elbow): 18-20mm, D90RFZ-22-15 (90° short structure variable diameter elbow): 22-15mm, D90RFZ-22-25 (90° short structure variable diameter elbow): 22-25mm, D90RFZ-28-15 (90° short structure variable diameter elbow): 28-15mm, D90FCB-15-15 (90° bearing plate elbow with female thread): 15-15mm, D90FCB-18-15 (90° bearing plate elbow with female thread): 18-15mm, D90FCB-22-20 (90° bearing plate elbow with female thread): 22-20mm, D90FCBL-15-15 (90° Female Elbow with Long wall Plate): 15-15mm, D90FCBL-18-15 (90° Female Elbow with Long wall Plate): 18-15mm, D90FCBL-22-20 (90° Female Elbow with Long wall Plate): 22-20mm, D90FZP-15-15 (90° Female Elbow with Seat Plate): 15-15mm, D90FZP-18-15 (90° Female Elbow with Seat Plate): 18-15mm, D90FZP-22-20 (90° Female Elbow with Seat Plate): 22-20mm, DM90F-15-15 (Double Tap Connector 90°/90° with Female Thread): 15-15mm, D90MZ-15-15 (90° short elbow with male thread): 15-15mm, D90MZ-18-15 (90° short elbow with male thread): 18-15mm, D90MZ-22-20 (90° short elbow with male thread): 22-20mm, D90MZ-28-25 (90° short elbow with male thread): 28-25mm, D90MZ-35-32 (90° short elbow with male thread): 35-32mm, D90MZ-42-40 (90° short elbow with male thread): 42-40mm, D90MZ-54-50 (90° short elbow with male thread): 54-50mm, D90RMZ-18-20 (90° reducing short elbow with male thread): 18-20mm, DL-15 (Flange): 15mm, DL-18 (Flange): 18mm, DL-22 (Flange): 22mm, DL-28 (Flange): 28mm, DL-35 (Flange): 35mm, DL-42 (Flange): 42mm, DL-54 (Flange): 54mm, DL-76.1 (Flange): 76.1mm, DL-88.9 (Flange): 88.9mm, DL-108 (Flange): 108mm, DDSL-15 (Adaptador flange): 15mm, DDSL-18 (Adaptador flange): 18mm, DDSL-22 (Adaptador flange): 22mm, DDSL-28 (Adaptador flange): 28mm, DDSL-35 (Adaptador flange): 35mm, DDSL-42 (Adaptador flange): 42mm, DDSL-54 (Adaptador flange): 54mm, DDSL-66.7 (Adaptador flange): 66.7mm, DDSL-76.1 (Adaptador flange): 76.1mm, DDSL-88.9 (Adaptador flange): 88.9mm, DDSL-108 (Adaptador flange): 108mm, DSS-22 (Flexible coupling): 22mm, DSFC-12-15 (Straight pipe with female thread): 12-15mm, DSFC-15-15 (Straight pipe with female thread): 15-15mm, DSFC-18-15 (Straight pipe with female thread): 18-15mm, DSFC-18-20 (Straight pipe with female thread): 18-20mm, DSFC-22-15 (Straight pipe with female thread): 22-15mm, DSFC-22-20 (Straight pipe with female thread): 22-20mm, DSFC-42-40 (Straight pipe with female thread): 42-40mm, DSFC-28-20 (Straight pipe with female thread): 28-20mm, DSFC-28-25 (Straight pipe with female thread): 28-25mm, DSFC-35-32 (Straight pipe with female thread): 35-32mm, DSFC-54-50 (Straight pipe with female thread): 54-50mm, DSMC-15-15 (Straight pipe with male thread): 15-15mm, DSMC-18-15 (Straight pipe with male thread): 18-15mm, DSMC-18-20 (Straight pipe with male thread): 18-20mm, DSMC-22-15 (Straight pipe with male thread): 22-15mm, DSMC-22-20 (Straight pipe with male thread): 22-20mm, DSMC-22-25 (Straight pipe with male thread): 22-25mm, DSMC-28-20 (Straight pipe with male thread): 28-20mm, DSMC-28-25 (Straight pipe with male thread): 28-25mm, DSMC-28-32 (Straight pipe with male thread): 28-32mm, DSMC-35-32 (Straight pipe with male thread): 35-32mm, DSMC-42-40 (Straight pipe with male thread): 42-40mm, DSMC-54-50 (Straight pipe with male thread): 54-50mm, DDS-12 (Coupling): 12mm, DDS-15 (Coupling): 15mm, DDS-18 (Coupling): 18mm, DDS-22 (Coupling): 22mm, DDS-28 (Coupling): 28mm, DDS-35 (Coupling): 35mm, DDS-42 (Coupling): 42mm, DDS-54 (Coupling): 54mm, DDS-66.7 (Coupling): 66.7mm, DDS-76.1 (Coupling): 76.1mm, DDS-88.9 (Coupling): 88.9mm, DDS-108 (Coupling): 108mm, DSK-12 (Coupling without stop): 12mm, DSK-15 (Coupling without stop): 15mm, DSK-18 (Coupling without stop): 18mm, DSK-22 (Coupling without stop): 22mm, DSK-28 (Coupling without stop): 28mm, DSK-35 (Coupling without stop): 35mm, DSK-42 (Coupling without stop): 42mm, DSK-54 (Coupling without stop): 54mm, DSK-66.7 (Coupling without stop): 66.7mm, DSK-76.1 (Coupling without stop): 76.1mm, DSK-88.9 (Coupling without stop): 88.9mm, DSK-108 (Coupling without stop): 108mm, DSF-15-15 (Female thread coupling): 15-15mm, DSF-18-15 (Female thread coupling): 18-15mm, DSF-22-20 (Female thread coupling): 22-20mm, DSF-28-25 (Female thread coupling): 28-25mm, DSF-35-32 (Female thread coupling): 35-32mm, DSF-42-40 (Female thread coupling): 42-40mm, DSF-54-50 (Female thread coupling): 54-50mm, DSF-108-100 (Female thread coupling): 108-100mm, DSF-76.1-65 (Female thread coupling): 76.1-65mm, DSF-88.9-80 (Female thread coupling): 88.9-80mm, DSRF-12-15 (Female thread reducing coupling): 12-15mm, DSRF-15-10 (Female thread reducing coupling): 15-10mm, DSRF-15-20 (Female thread reducing coupling): 15-20mm, DSRF-18-20 (Female thread reducing coupling): 18-20mm, DSRF-22-15 (Female thread reducing coupling): 22-15mm, DSRF-22-25 (Female thread reducing coupling): 22-25mm, DSRF-28-15 (Female thread reducing coupling): 28-15mm, DSRF-28-20 (Female thread reducing coupling): 28-20mm, DSRF-28-32 (Female thread reducing coupling): 28-32mm, DSRF-35-20 (Female thread reducing coupling): 35-20mm, DSRF-35-25 (Female thread reducing coupling): 35-25mm, DSRF-35-40 (Female thread reducing coupling): 35-40mm, DSRF-42-32 (Female thread reducing coupling): 42-32mm, DSRF-42-50 (Female thread reducing coupling): 42-50mm, DSRF-54-40 (Female thread reducing coupling): 54-40mm, DSRF-76.1-40 (Female thread reducing coupling): 76.1-40mm, DSM-12-10 (Male thread coupling): 12-10mm, DSM-15-15 (Male thread coupling): 15-15mm, DSM-18-15 (Male thread coupling): 18-15mm, DSM-22-20 (Male thread coupling): 22-20mm, DSM-28-25 (Male thread coupling): 28-25mm, DSM-35-32 (Male thread coupling): 35-32mm, DSM-42-40 (Male thread coupling): 42-40mm, DSM-54-50 (Male thread coupling): 54-50mm, DSM-76.1-65 (Male thread coupling): 76.1-65mm, DSM-88.9-80 (Male thread coupling): 88.9-80mm, DSM-108-100 (Male thread coupling): 108-100mm, DSRM-12-15 (Male thread reducing coupling): 12-15mm, DSRM-15-10 (Male thread reducing coupling): 15-10mm, DSRM-15-20 (Male thread reducing coupling): 15-20mm, DSRM-18-20 (Male thread reducing coupling): 18-20mm, DSRM-22-15 (Male thread reducing coupling): 22-15mm, DSRM-22-25 (Male thread reducing coupling): 22-25mm, DSRM-28-20 (Male thread reducing coupling): 28-20mm, DSRM-28-32 (Male thread reducing coupling): 28-32mm, DSRM-35-15 (Male thread reducing coupling): 35-15mm, DSRM-35-25 (Male thread reducing coupling): 35-25mm, DSRM-35-40 (Male thread reducing coupling): 35-40mm, DSRM-42-32 (Male thread reducing coupling): 42-32mm, DSRM-54-40 (Male thread reducing coupling): 54-40mm, DSRM-66.7-65 (Male thread reducing coupling): 66.7-65mm, DSR-22X15 (Reducing coupling): 22X15mm, DSR-22X18 (Reducing coupling): 22X18mm, DSR-28X15 (Reducing coupling): 28X15mm, DSR-28X18 (Reducing coupling): 28X18mm, DSR-28X22 (Reducing coupling): 28X22mm, DSR-35X18 (Reducing coupling): 35X18mm, DSR-35X22 (Reducing coupling): 35X22mm, DSR-35X28 (Reducing coupling): 35X28mm, DSR-42X18 (Reducing coupling): 42X18mm, DSR-42X22 (Reducing coupling): 42X22mm, DSR-42X28 (Reducing coupling): 42X28mm, DSR-42X35 (Reducing coupling): 42X35mm, DSR-54X18 (Reducing coupling): 54X18mm, DSR-54X22 (Reducing coupling): 54X22mm, DSR-54X28 (Reducing coupling): 54X28mm, DSR-54X35 (Reducing coupling): 54X35mm, DSR-54X42 (Reducing coupling): 54X42mm, DSR-76.1X35 (Reducing coupling): 76.1X35mm, DSR-76.1X42 (Reducing coupling): 76.1X42mm, DSR-76.1X54 (Reducing coupling): 76.1X54mm, DSR-88.9X42 (Reducing coupling): 88.9X42mm, DSR-88.9X54 (Reducing coupling): 88.9X54mm, DSR-88.9X76.1 (Reducing coupling): 88.9X76.1mm, DSR-108X54 (Reducing coupling): 108X54mm, DSR-108X76.1 (Reducing coupling): 108X76.1mm, DSR-108X88.9 (Reducing coupling): 108X88.9mm, DSRCK-12X15 (Reducer with plain end): 12X15mm, DSRCK-12X18 (Reducer with plain end): 12X18mm, DSRCK-12X22 (Reducer with plain end): 12X22mm, DSRCK-12X28 (Reducer with plain end): 12X28mm, DSRCK-15X18 (Reducer with plain end): 15X18mm, DSRCK-15X22 (Reducer with plain end): 15X22mm, DSRCK-15X28 (Reducer with plain end): 15X28mm, DSRCK-15X35 (Reducer with plain end): 15X35mm, DSRCK-15X42 (Reducer with plain end): 15X42mm, DSRCK-15X54 (Reducer with plain end): 15X54mm, DSRCK-18X22 (Reducer with plain end): 18X22mm, DSRCK-18X28 (Reducer with plain end): 18X28mm, DSRCK-18X35 (Reducer with plain end): 18X35mm, DSRCK-18X42 (Reducer with plain end): 18X42mm, DSRCK-18X54 (Reducer with plain end): 18X54mm, DSRCK-22X28 (Reducer with plain end): 22X28mm, DSRCK-22X35 (Reducer with plain end): 22X35mm, DSRCK-22X42 (Reducer with plain end): 22X42mm, DSRCK-22X54 (Reducer with plain end): 22X54mm, DSRCK-28X35 (Reducer with plain end): 28X35mm, DSRCK-28X42 (Reducer with plain end): 28X42mm, DSRCK-28X54 (Reducer with plain end): 28X54mm, DSRCK-28X66.7 (Reducer with plain end): 28X66.7mm, DSRCK-35X42 (Reducer with plain end): 35X42mm, DSRCK-35X54 (Reducer with plain end): 35X54mm, DSRCK-35X66.7 (Reducer with plain end): 35X66.7mm, DSRCK-42X54 (Reducer with plain end): 42X54mm, DSRCK-42X66.7 (Reducer with plain end): 42X66.7mm, DSRCK-42X76.1 (Reducer with plain end): 42X76.1mm, DSRCK-54X66.7 (Reducer with plain end): 54X66.7mm, DSRCK-54X76.1 (Reducer with plain end): 54X76.1mm, DSRCK-54X88.9 (Reducer with plain end): 54X88.9mm, DSRCK-54X108 (Reducer with plain end): 54X108mm, DSRCK-66.7X76.1 (Reducer with plain end): 66.7X76.1mm, DSRCK-66.7X88.9 (Reducer with plain end): 66.7X88.9mm, DSRCK-66.7X108 (Reducer with plain end): 66.7X108mm, DSRCK-76.1X108 (Reducer with plain end): 76.1X108mm, DSRCK-76.1X88.9 (Reducer with plain end): 76.1X88.9mm, DSRCK-88.9X108 (Reducer with plain end): 88.9X108mm, DSRCK-108X168.3 (Reducer with plain end): 108X168.3mm, DSHJRM-15-20 (Variable diameter outer silk alive joint): 15-20mm, DSHJRM-18-20 (Variable diameter outer silk alive joint): 18-20mm, DSHJRM-22-15 (Variable diameter outer silk alive joint): 22-15mm, DSHJRM-22-25 (Variable diameter outer silk alive joint): 22-25mm, DSHJRM-28-32 (Variable diameter outer silk alive joint): 28-32mm, DHF-15-15 (Moveable union): 15-15mm, DHF-18-15 (Moveable union): 18-15mm, DHF-22-20 (Moveable union): 22-20mm, DHF-28-25 (Moveable union): 28-25mm, DHF-35-32 (Moveable union): 35-32mm, DHF-42-40 (Moveable union): 42-40mm, DHF-54-50 (Moveable union): 54-50mm, DHF-76.1-65 (Moveable union): 76.1-65mm, DHRF-15-20 (Reducing moveable union): 15-20mm, DHRF-18-20 (Reducing moveable union): 18-20mm, DHRF-22-15 (Reducing moveable union): 22-15mm, DHRF-22-25 (Reducing moveable union): 22-25mm, DHRF-28-32 (Reducing moveable union): 28-32mm, DHRF-35-40 (Reducing moveable union): 35-40mm, DHRF-42-G1 3/4 (Reducing moveable union): 42-G1 3/4mm, DHRF-42-50 (Reducing moveable union): 42-50mm, DHRF-54-65 (Reducing moveable union): 54-65mm, DHRF-54-G2 3/8 (Reducing moveable union): 54-G2 3/8mm, D3T-12X12X12 (Equal tee): 12X12X12mm, D3T-15X15X15 (Equal tee): 15X15X15mm, D3T-18X18X18 (Equal tee): 18X18X18mm, D3T-22X22X22 (Equal tee): 22X22X22mm, D3T-28X28X28 (Equal tee): 28X28X28mm, D3T-35X35X35 (Equal tee): 35X35X35mm, D3T-42X42X42 (Equal tee): 42X42X42mm, D3T-54X54X54 (Equal tee): 54X54X54mm, D3T-66.7X66.7X66.7 (Equal tee): 66.7X66.7X66.7mm, D3T-76.1X76.1X76.1 (Equal tee): 76.1X76.1X76.1mm, D3T-88.9X88.9X88.9 (Equal tee): 88.9X88.9X88.9mm, D3T-108X108X108 (Equal tee): 108X108X108mm, DTF-15-15X15 (Female thread equal tee): 15-15X15mm, DTF-18-15X18 (Female thread equal tee): 18-15X18mm, DTF-22-20X22 (Female thread equal tee): 22-20X22mm, DTF-28-25X28 (Female thread equal tee): 28-25X28mm, DTF-35-32X35 (Female thread equal tee): 35-32X35mm, DTF-42-40X42 (Female thread equal tee): 42-40X42mm, DTF-54-50X54 (Female thread equal tee): 54-50X54mm, DTRF-18-20X18 (Reducing tee with female thread branch): 18-20X18mm, DTRF-22-15X22 (Reducing tee with female thread branch): 22-15X22mm, DTRF-28-15X28 (Reducing tee with female thread branch): 28-15X28mm, DTRF-28-20X28 (Reducing tee with female thread branch): 28-20X28mm, DTRF-35-15X35 (Reducing tee with female thread branch): 35-15X35mm, DTRF-35-20X35 (Reducing tee with female thread branch): 35-20X35mm, DTRF-35-25X35 (Reducing tee with female thread branch): 35-25X35mm, DTRF-42-15X42 (Reducing tee with female thread branch): 42-15X42mm, DTRF-42-20X42 (Reducing tee with female thread branch): 42-20X42mm, DTRF-42-25X42 (Reducing tee with female thread branch): 42-25X42mm, DTRF-42-32X42 (Reducing tee with female thread branch): 42-32X42mm, DTRF-54-15X54 (Reducing tee with female thread branch): 54-15X54mm, DTRF-54-20X54 (Reducing tee with female thread branch): 54-20X54mm, DTRF-54-25X54 (Reducing tee with female thread branch): 54-25X54mm, DTRF-54-32X54 (Reducing tee with female thread branch): 54-32X54mm, DTRF-54-40X54 (Reducing tee with female thread branch): 54-40X54mm, DTRF-66.7-20X66.7 (Reducing tee with female thread branch): 66.7-20X66.7mm, DTRF-76.1-20X76.1 (Reducing tee with female thread branch): 76.1-20X76.1mm, DTRF-76.1-50X76.1 (Reducing tee with female thread branch): 76.1-50X76.1mm, DTRF-88.9-20X88.9 (Reducing tee with female thread branch): 88.9-20X88.9mm, DTRF-88.9-50X88.9 (Reducing tee with female thread branch): 88.9-50X88.9mm, DTRF-108-20X108 (Reducing tee with female thread branch): 108-20X108mm, DTRF-108-50X108 (Reducing tee with female thread branch): 108-50X108mm, DTM-15-15X15 (Male thread equal tee): 15-15X15mm, DTM-18-15X18 (Male thread equal tee): 18-15X18mm, DTM-22-20X22 (Male thread equal tee): 22-20X22mm, DTM-28-25X28 (Male thread equal tee): 28-25X28mm, DTM-35-32X35 (Male thread equal tee): 35-32X35mm, DTM-42-40X42 (Male thread equal tee): 42-40X42mm, DTM-54-50X54 (Male thread equal tee): 54-50X54mm, DTRM-22-25X22 (Reducing tee with male thread branch): 22-25X22mm, DTRM-22-15X22 (Reducing tee with male thread branch): 22-15X22mm, DTRM-28-15X28 (Reducing tee with male thread branch): 28-15X28mm, DTRM-28-20X28 (Reducing tee with male thread branch): 28-20X28mm, DTRM-35-20X35 (Reducing tee with male thread branch): 35-20X35mm, DTRM-35-25X35 (Reducing tee with male thread branch): 35-25X35mm, DTRM-35-40X35 (Reducing tee with male thread branch): 35-40X35mm, DTRM-42-20X42 (Reducing tee with male thread branch): 42-20X42mm, DTRM-42-25X42 (Reducing tee with male thread branch): 42-25X42mm, DTRM-42-32X42 (Reducing tee with male thread branch): 42-32X42mm, DTRM-54-25X54 (Reducing tee with male thread branch): 54-25X54mm, DTRM-54-40X54 (Reducing tee with male thread branch): 54-40X54mm, DTR-15X12X15 (Reducing tee): 15X12X15mm, DTR-15X18X15 (Reducing tee): 15X18X15mm, DTR-15X22X15 (Reducing tee): 15X22X15mm, DTR-18X15X15 (Reducing tee): 18X15X15mm, DTR-18X12X18 (Reducing tee): 18X12X18mm, DTR-18X15X18 (Reducing tee): 18X15X18mm, DTR-18X22X18 (Reducing tee): 18X22X18mm, DTR-22X12X22 (Reducing tee): 22X12X22mm, DTR-22X15X15 (Reducing tee): 22X15X15mm, DTR-22X18X18 (Reducing tee): 22X18X18mm, DTR-22X28X22 (Reducing tee): 22X28X22mm, DTR-22X15X22 (Reducing tee): 22X15X22mm, DTR-22X18X22 (Reducing tee): 22X18X22mm, DTR-28X15X28 (Reducing tee): 28X15X28mm, DTR-28X18X28 (Reducing tee): 28X18X28mm, DTR-28X22X22 (Reducing tee): 28X22X22mm, DTR-28X22X28 (Reducing tee): 28X22X28mm, DTR-35X15X35 (Reducing tee): 35X15X35mm, DTR-35X18X35 (Reducing tee): 35X18X35mm, DTR-35X22X35 (Reducing tee): 35X22X35mm, DTR-35X28X35 (Reducing tee): 35X28X35mm, DTR-42X15X42 (Reducing tee): 42X15X42mm, DTR-42X18X42 (Reducing tee): 42X18X42mm, DTR-42X22X42 (Reducing tee): 42X22X42mm, DTR-42X28X35 (Reducing tee): 42X28X35mm, DTR-42X28X42 (Reducing tee): 42X28X42mm, DTR-42X35X42 (Reducing tee): 42X35X42mm, DTR-42X54X42 (Reducing tee): 42X54X42mm, DTR-54X15X54 (Reducing tee): 54X15X54mm, DTR-54X18X54 (Reducing tee): 54X18X54mm, DTR-54X22X54 (Reducing tee): 54X22X54mm, DTR-54X28X54 (Reducing tee): 54X28X54mm, DTR-54X35X54 (Reducing tee): 54X35X54mm, DTR-54X42X54 (Reducing tee): 54X42X54mm, DTR-66.7X22X66.7 (Reducing tee): 66.7X22X66.7mm, DTR-66.7X28X66.7 (Reducing tee): 66.7X28X66.7mm, DTR-66.7X35X66.7 (Reducing tee): 66.7X35X66.7mm, DTR-66.7X42X66.7 (Reducing tee): 66.7X42X66.7mm, DTR-66.7X54X66.7 (Reducing tee): 66.7X54X66.7mm, DTR-76.1X22X76.1 (Reducing tee): 76.1X22X76.1mm, DTR-76.1X28X76.1 (Reducing tee): 76.1X28X76.1mm, DTR-76.1X35X76.1 (Reducing tee): 76.1X35X76.1mm, DTR-76.1X42X76.1 (Reducing tee): 76.1X42X76.1mm, DTR-76.1X54X76.1 (Reducing tee): 76.1X54X76.1mm, DTR-76.1X66.7X76.1 (Reducing tee): 76.1X66.7X76.1mm, DTR-88.9X22X88.9 (Reducing tee): 88.9X22X88.9mm, DTR-88.9X28X88.9 (Reducing tee): 88.9X28X88.9mm, DTR-88.9X35X88.9 (Reducing tee): 88.9X35X88.9mm, DTR-88.9X42X88.9 (Reducing tee): 88.9X42X88.9mm, DTR-88.9X54X88.9 (Reducing tee): 88.9X54X88.9mm, DTR-88.9X66.7X88.9 (Reducing tee): 88.9X66.7X88.9mm, DTR-88.9X76.1X88.9 (Reducing tee): 88.9X76.1X88.9mm, DTR-108X22X108 (Reducing tee): 108X22X108mm, DTR-108X28X108 (Reducing tee): 108X28X108mm, DTR-108X35X108 (Reducing tee): 108X35X108mm, DTR-108X42X108 (Reducing tee): 108X42X108mm, DTR-108X54X108 (Reducing tee): 108X54X108mm, DTR-108X66.7X108 (Reducing tee): 108X66.7X108mm, DTR-108X76.1X108 (Reducing tee): 108X76.1X108mm, DTR-108X88.9X108 (Reducing tee): 108X88.9X108mm, DTR-28X35X28 (Reducing tee): 28X35X28mm, DTR-28X42X28 (Reducing tee): 28X42X28mm, DTR-35X28X28 (Reducing tee): 35X28X28mm, DTR-35X42X35 (Reducing tee): 35X42X35mm, DTR-35X54X35 (Reducing tee): 35X54X35mm, DTR-54X35X28 (Reducing tee): 54X35X28mm, DTR-54X42X35 (Reducing tee): 54X42X35mm, DTR-54X42X42 (Reducing tee): 54X42X42mm, DMTF-15-15X15 (Misaligned T-piece): 15-15X15mm, DTFZP-18-15X18 (Chassis tee joint): 18-15X18mm, DTFZP-22-15X22 (Chassis tee joint): 22-15X22mm, D4T-22X22X22X22 (Equal cross): 22X22X22X22mm, D4T-28X28X28X28 (Equal cross): 28X28X28X28mm, D4T-35X35X35X35 (Equal cross): 35X35X35X35mm, D4T-42X42X42X42 (Equal cross): 42X42X42X42mm, D4T-54X54X54X54 (Equal cross): 54X54X54X54mm, D4T-76.1X76.1X76.1X76.1 (Equal cross): 76.1X76.1X76.1X76.1mm, D4TR-28X22X28X22 (Reducing cross): 28X22X28X22mm, D4TR-35X22X35X22 (Reducing cross): 35X22X35X22mm, D4TR-35X28X35X28 (Reducing cross): 35X28X35X28mm, D4TR-42X22X42X22 (Reducing cross): 42X22X42X22mm, D4TR-42X28X42X28 (Reducing cross): 42X28X42X28mm, D4TR-42X35X42X35 (Reducing cross): 42X35X42X35mm, D4TR-54X22X54X22 (Reducing cross): 54X22X54X22mm, D4TR-54X28X54X28 (Reducing cross): 54X28X54X28mm, D4TR-54X35X54X35 (Reducing cross): 54X35X54X35mm, D4TR-54X42X54X42 (Reducing cross): 54X42X54X42mm, D4TF-22-20X22-20 (Female thread equal cross): 22-20X22-20mm, D4TF-28-25X28-25 (Female thread equal cross): 28-25X28-25mm, D4TF-35-32X35-32 (Female thread equal cross): 35-32X35-32mm, D4TF-42-40X42-40 (Female thread equal cross): 42-40X42-40mm, D4TRF-22-15X22-15 (reducing cross with female thread): 22-15X22-15mm, D4TRF-54-40X54-40 (reducing cross with female thread): 54-40X54-40mm. DDC-12 (End cap): 12mm, DDC-15 (End cap): 15mm, DDC-18 (End cap): 18mm, DDC-22 (End cap): 22mm, DDC-28 (End cap): 28mm, DDC-35 (End cap): 35mm, DDC-42 (End cap): 42mm, DDC-54 (End cap): 54mm, DDC-66.7 (End cap): 66.7mm, DDC-76.1 (End cap): 76.1mm, DDC-88.9 (End cap): 88.9mm, DDC-108 (End cap): 108mm. Pipe: N·U Series 1 N·U Series 2

Approval Holder:

Meide Archung (Jinan) Piping Industry Co., Ltd.

Company Name

Meide Archung (Jinan) Piping Industry Co., Ltd.

Address

No.49, Huxi Street North Side, Jinshui Subdistrict, Pingyin County, Jinan, Shandong

Country

China

View All Listings by this Company

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

MTF, model number, Size on fitting

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Marla Tube Fittings Limited

Company Name

Marla Tube Fittings Limited

Address

Kinwarton Farm Road Alcester

Postcode

B49 6EH

Country

United Kingdom

Phone

01789 761207

General Email

graham.walker@marla.co.uk

View All Listings by this Company

Range of green Sappro butt-welded polypropylene fittings for use with Sappro PPR pipes. Maximum working pressure: 20 Bar. Maximum operating temperature: 23°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250802006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sappro logo and size on body. Sappro logo, ISO 15874-2 and size on pipe body

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Pipe: SFP6285205000015 20 mm SFP6285205000022 25 mm SFP6285205000039 32 mm SFP6285205000046 40 mm SFP6285205000053 50 mm SFP6285205000060 63 mm SFP6285205000077 75 mm SFP6285205000084 90 mm Elbow 90°: SFP6285205002613 20 mm SFP6285205002620 25 mm SFP6285205002637 32 mm SFP6285205002644 40 mm SFP6285205002651 50 mm SFP6285205002668 63 mm SFP6285205002675 75 mm SFP6285205002682 90 mm Elbow 45°: SFP6285205002798 20 mm SFP6285205002804 25 mm SFP6285205002811 32 mm SFP6285205003030 40 mm SFP6285205003047 50 mm SFP6285205003054 63 mm SFP6285205003061 75 mm SFP6285205003078 90 mm Equal Tee: SFP6285205003566 20 mm SFP6285205003573 25 mm SFP6285205003580 32 mm SFP6285205003597 40 mm SFP6285205003603 50 mm SFP6285205003610 63 mm SFP6285205003627 75 mm SFP6285205003634 90 mm Socket: SFP6285205003221 20 mm SFP6285205003238 25 mm SFP6285205003245 32 mm SFP6285205003252 40 mm SFP6285205003269 50 mm SFP6285205003276 63 mm SFP6285205003283 75 mm SFP6285205003290 90 mm Bridge Bend: SFP6285205001593 20mm SFP6285205001609 25mm SFP6285205001616 32mm Socket Bridge Bend: SFP6285205002033 25mm End Cap: SFP6285205003740 20mm SFP6285205003962 25mm SFP6285205003979 32mm SFP6285205003986 40mm SFP6285205003993 50mm SFP6285205004006 63mm SFP6285205004013 75mm SFP6285205004020 90mm Male Plug: SFP6285205004136 20mm Reducer Socket: SFP6285205007267 25mm x 20mm SFP6285205007281 32mm x 25mm SFP6285205007274 32mm x 20mm SFP6285205007304 40mm x 25mm SFP6285205007311 40mm x 32mm SFP6285205007313 50mm x 25mm SFP6285205007314 50mm x 32mm SFP6285205007315 50mm x 40mm SFP6285205007317 63mm x 25mm SFP6285205007318 63mm x 32mm SFP6285205007319 63mm x 40mm SFP6285205007320 63mm x 50mm Reducer: SFP6285205005331 75mm x 32mm SFP6285205005348 75mm x 40mm SFP6285205005355 75mm x 50mm SFP6285205005362 75mm x 63mm Reducer Tee: SFP6285205005911 25mm x 20mm SFP6285205006208 32mm x 25mm SFP6285205006222 40mm x 25mm SFP6285205006239 40mm x 32mm SFP6285205006604 50mm x 25mm SFP6285205006628 50mm x 32mm SFP6285205006642 63mm x 25mm SFP6285205006666 63mm x 32mm SFP6285205006673 63mm x 40mm SFP6285205006697 75mm x 32mm SFP6285205006703 75mm x 40mm SFP6285205006710 75mm x 50mm SFP6285205006727 75mm x 63mm Female Socket: SFP6285205007625 20mm x 1/2" BSP (F) SFP6285205007626 20mm x 3/4" BSP (F) SFP6285205007627 25mm x 1/2" BSP (F) SFP6285205007628 25mm x 3/4" BSP (F) SFP6285205007629 32mm x 1/2" BSP (F) SFP6285205007630 32mm x 3/4" BSP (F) SFP6285205007631 32mm x 1" BSP (F) Male Socket: SFP6285205007660 20mm x 1/2" BSP (M) SFP6285205007661 20mm x 3/4" BSP (M) SFP6285205007662 25mm x 1/2" BSP (M) SFP6285205007663 25mm x 3/4" BSP (M) SFP6285205007664 32mm x 1/2" BSP (M) SFP6285205007665 32mm x 3/4" BSP (M) Female Double Tee: SFP6285205007458 25mm x 1/2" BSP (F) Female Elbow: SFP6285205008039 20mm x 1/2" BSP (F) SFP6285205008041 25mm x 1/2" BSP (F) SFP6285205008042 25mm x 3/4" BSP (F) SFP6285205008043 32mm x 1/2" BSP (F) SFP6285205008044 32mm x 3/4" BSP (F) SFP6285205008045 32mm x 1" BSP (F) Male Elbow: SFP6285205008055 25mm x 1/2" BSP (M) SFP6285205008056 25mm x 3/4" BSP (M) SFP6285205008058 32mm x 1" BSP (M) Male Hexagon: SFP6285205008025 32mm x 1" BSP (M) SFP6285205008027 40mm x 1 1/4" BSP (M) SFP6285205008028 50mm x 1 1/2" BSP (M) SFP6285205008029 63mm x 2" BSP (M) SFP6285205008030 75mm x 2 1/2" BSP (M) SFP6285205008031 90mm x 3" BSP (M) Female Tee: SFP6285205007599 25mm x 1/2" BSP (F) SFP6285205007600 25mm x 3/4" BSP (F) SFP6285205007601 32mm x 1/2" BSP (F) SFP6285205007602 32mm x 3/4" BSP (F) SFP6285205007603 32mm x 1" BSP (F)

Approval Holder:

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Company Name

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Address

Albjadiya Industrial RIYADH

Country

Saudi Arabia

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Alfred Victoria "crown" logo on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

F104M

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control

Wall Mounted Undefinable Air Gap – See IRN’s Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Product Images

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

Range of flanged, lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

241202080

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

BFVLL: DN50, DN65, DN80, DN100, DN125, DN150. BFVLG: DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600. BFVLE: DN700, DN800, DN900, DN1000, DN1200. （lugged type） BFVWL:DN50, DN65, DN80, DN100, DN125, DN150. BFVWG: DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600. BFVWE:DN700, DN800, DN900, DN1000, DN1200. （wafer type） BFVFC: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600. BFVFE: DN700, DN800, DN900, DN1000, DN1200. （flanged type）

Marking:

Valve body casting - ”DVK” or “D”. For flanged type butterfly valves - ”DVK” logo, DN & PN on body. For lugged type butterfly valves - ”D” logo, DN & PN on body. For wafer type butterfly valves - ”D” logo, DN & PN on body. Data plate: DVK, PN, DN & technical data.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

BFVLL, BFVLG, BFVLE - lugged type BFVWL, BFVWG & BFVWE - wafer type BFVFC, BFVFE - flange type

Product Images

Approval Holder:

DVK International Co., Ltd

Company Name

DVK International Co., Ltd

Address

No. 118, Building 1, No 168 Jixin Road, Minhang District, Shanghai.

Postcode

201104

Country

China

General Email

dvkvalve@126.com

View All Listings by this Company

Range of inline plastic bodied ball valves with EPDM ‘O-rings and lever operated. For use with PVC-U pressure pipe in accordance with BS EN 1452 standard Maximum working pressure. Sizes 20mm – 63mm & 1/2" – 2”: 16.0 Bar Sizes 110mm & 2 1/2” – 4”: 10.0 Bar Cold water only

Section:

2270 Valves

Section Subtitle:

Spherical, plastic.

WRAS Approval Number:

250702051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

OMEGA on operating member. DN, PN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

OVP20I0200 - 20mm OVP20I0250 - 25mm OVP20I0320 - 32mm OVP20I0400 - 40mm OVP20I0500 - 50mm OVP20I0630 - 63mm OVP20I0750 - 75mm OVP20I0900 - 90mm OVP20I1100 - 110mm OVP20P0200 - ½" OVP20P0250 - ¾" OVP20P0320 - 1" OVP20P0400 - 1¼" OVP20P0500 - 1½" OVP20P0630 - 2" OVP20I0750 - 75mm OVP20P0900 - 3" OVP20P1100 - 4" OVT20F0200 - ½" OVT20F0250 - ¾" OVT20F0320 - 1" OVT20F0400 - 1¼" OVT20F0500 - 1½" OVT20F0630 - 2" OVT20F0750 - 2½" / 75mm OVT20F0900 - 3" OVT20F1100 - 4" OVP21I0200 - 20mm

OVP21I0250 - 25mm OVP21I0320 - 32mm OVP21I0400 - 40mm OVP21I0500 - 50mm OVP21I0630 - 63mm OVP21I0750 - 75mm OVP21I0900 - 90mm OVP21I1100 - 110mm OVP21P0200 - ½" OVP21P0250 - ¾" OVP21P0320 - 1" OVP21P0400 - 1¼" OVP21P0500 - 1½" OVP21P0630 - 2" OVP21I0750 - 75mm OVP21P0900 - 3" OVP21P1100 - 4" OVT21F0200 - ½" OVT21F0250 - ¾" OVT21F0320 - 1" OVT21F0400 - 1¼" OVT21F0500 - 1½" OVT21F0630 - 2" OVT21F0750 - 75mm OVT21F0900 - 3" OVT21F1100 - 4"

Approval Holder:

PPFV Ltd.

Company Name

PPFV Ltd.

Address

6 Cedar Trade Park, Cobham Road Ferndown Industrial Estate, Wimbourne, Dorset

Postcode

BH21 7SD

View All Listings by this Company

Manufacturer:

Niesco For Modern Water Systems Production

Company Name

Niesco For Modern Water Systems Production

Address

Industrial District Six, Piece 69, 71, Badr City, Cairo

Country

Egypt

View All Listings by this Company

Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM coated wedge and EPDM O - rings. Maximum working pressure – 10.0 bar (DN900 and DN1000 only) and 16.0 bar (DN350 – DN800). Maximum operating temperature - 85°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

241202079

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN350 – DN1000 flanged

Marking:

Size, PN, model number and UNIWAT & logo cast on body. Dataplate with UNIWAT, logo, DN, PN & model.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UNIWAT 504 range

Product Images

Approval Holder:

Comeval Valve Systems S.L y CIA., Soc. Comanditaria

Company Name

Comeval Valve Systems S.L y CIA., Soc. Comanditaria

Address

Les Rotes 15 El Puig de Santa Maria

Postcode

ES 46540

Country

Spain

General Email

carlos.ruiz@comeval.es

View All Listings by this Company

Range of gate valves incorporating either rising or non-rising spindle headworks and PTFE gaskets. With Bronze body, bronze wedge and handwheel. Maximum working pressure 20.0 bar Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250708030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” – 2” BSPT (F), BSPP (F) & NPT (F).

Marking:

VANTEC, CC491K, Size, DN and PN on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

VAG402

Product Images

Approval Holder:

Vantec Industrial

Company Name

Vantec Industrial

Address

128, City Road, London

Postcode

EC1V 2NX

Country

United Kingdom

Phone

+971543038194

General Email

A.OMER@VANTECINDUST.CO.UK

View All Listings by this Company

'Ak99,5 - 99,5% Alumina Ceramic'. Ivory coloured, compression moulded and fired Ceramic material. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

31/08/2030

Approval Holder:

QSIL Ceramics GmbH

Company Name

QSIL Ceramics GmbH

Address

Triptiser Strasse 22, 07819 Triptis

Country

Germany

View All Listings by this Company

'LM119-1'. Factory applied, white coloured epoxy coating. Apply as per manufacturer's User Instructions 'File no.: LM-001', 'Edition: A', 'Issue date: 2024-JAN.-15th'. Cure for 10 minutes@190°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250855015

Expiry date:

31/08/2030

Approval Holder:

Langfang Limei Anticorrosion Engineering Co., Ltd.

Company Name

Langfang Limei Anticorrosion Engineering Co., Ltd.

Address

Nandian village of Nanjianta Township, Guangyang District, Langfang City, Hebei Province

Country

China

View All Listings by this Company

'3P764921 Pipe Spacer'. White coloured (opaque), injection moulded PP Pipe Spacer. For use with water up to 85°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

250755043

Expiry date:

31/07/2030

Approval Holder:

DAIKIN DEVICE CZECH REPUBLIC s.r.o.

Company Name

DAIKIN DEVICE CZECH REPUBLIC s.r.o.

Address

Švédské valy 2, 627 00 Brno

Country

Czech Republic

View All Listings by this Company

'VL1001P279'. Blue coloured, compression moulded silicone rubber. Shore hardness 60. Tested in-radius size 0.99mm. For use with water up to 65°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250855013

Expiry date:

31/08/2030

Approval Holder:

Vernay Global R&D Center

Company Name

Vernay Global R&D Center

Address

120 E. South College Street, Yellow Springs, Ohio 45387

Country

USA

View All Listings by this Company

'Weld-On 319 PVC Cement'. Clear Solvent Cement. Apply as per manufacturer's TDS '319-05-2024'. Cure for 4 hours@5°C. For use with water up to 23°C.

Section:

5560 Solvent Cements

Expiry date:

31/07/2030

Approval Holder:

IPS Corporation

Company Name

IPS Corporation

Address

445 W. Victoria Street, Compton, California 90220

Country

USA

Phone

(310) 898-3300

General Email

info@ipscorp.com

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall mounted. Two-way diverter valve. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd