Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2211359

Ranges of brass & chromium plated brass, nickel plated brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2211359
Size:: See models.
Marking:: CPS, Size, EN1542-2, UK or UK Made & UK on compression nut.
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: 182318 STRAIGHT COUPLING 317638 CHROME SWIVEL STRAIGHT TAP CONNECTOR 427218 STRAIGHT REDUCING COUPLING 537297 FEMALE COUPLING 538902 MALE COUPLING 538903 FEMALE COUPLING 538908 STOP END 754332 MALE COUPLING 755960 EQUAL ELBOW 797600 CHROME STRAIGHT COUPLING 797601 CHROME STRAIGHT COUPLING 797602 CHROME STRAIGHT COUPLING 797603 CHROME MALE COUPLING 797606 CHROME FEMALE COUPLING 797610 CHROME EQUAL ELBOW 797611 CHROME EQUAL ELBOW 797612 CHROME MALE ELBOW 797613 CHROME FEMALE ELBOW 797614 CHROME EQUAL TEE 797615 CHROME EQUAL TEE 799319 CHROME WALL PLATE ELBOW 801711 CHROME EQUAL ELBOW 870222 CHROME MALE ELBOW 870225 CHROME FEMALE ELBOW 874322 CHROME STOP END 875078 CHROME THREE PIECE REDUCING SET 875082 CHROME STOP END 875087 CHROME REDUCED END TEE 875088 CHROME REDUCED BRANCH & END TEE 950146 STRAIGHT COUPLING 950150 STRAIGHT REDUCING COUPLING 950152 STRAIGHT REDUCING COUPLING 950159 MALE COUPLING 950164 MALE COUPLING 950169 MALE COUPLING 950187 FEMALE COUPLING 950191 FEMALE COUPLING 950205 TANK CONNECTOR 950211 STOP END 950220 EQUAL ELBOW 950247 MALE ELBOW 950251 MALE ELBOW 950269 FEMALE ELBOW 950270 FEMALE ELBOW 950271 FEMALE ELBOW 950274 FEMALE ELBOW 950275 SWIVEL BENT TAP CONNECTOR 950278 WALL PLATE ELBOW 950286 EQUAL TEE 950290 REDUCED BRANCH & END TEE 950291 REDUCED END TEE 950293 REDUCED BRANCH TEE 950301 REDUCED BRANCH TEE 950326 REDUCED FEMALE BRANCH TEE 950327 REDUCED FEMALE BRANCH TEE 953075 STRAIGHT REDUCING COUPLING 953171 STRAIGHT REDUCING COUPLING 954298 STRAIGHT COUPLING 954300 STRAIGHT COUPLING 954301 STRAIGHT COUPLING 954314 MALE COUPLING 954317 MALE COUPLING 954320 MALE COUPLING 954321 MALE COUPLING 954337 FEMALE COUPLING 954340 FEMALE COUPLING 954341 FEMALE COUPLING 954344 SWIVEL STRAIGHT TAP CONNECTOR 954346 SWIVEL STRAIGHT TAP CONNECTOR 954347 TANK CONNECTOR 954348 TANK CONNECTOR 954351 STOP END 954352 STOP END 954353 STOP END 954355 EQUAL ELBOW 954356 EQUAL ELBOW 954357 EQUAL ELBOW 954367 MALE ELBOW 954370 MALE ELBOW 954394 EQUAL TEE 954395 EQUAL TEE 954396 EQUAL TEE 954397 EQUAL TEE P701CP.09 28mm EQUAL TEE CHROME P702CP.16 22 x 22 x 15mm TEE CHROME

Approval Holder:: The Highbourne Group, City Plumbing Supplies

Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

WRAS Approval Number: #2303335

Range of press-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with SS316L pipes. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303335
Size:: see model
Marking:: YS, size on body
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: STRAIGHT COUPLING SM3270 316L001515 – 15 mm SM3270 316L001818 – 18mm SM3270 316L002222 – 22mm SM3270 316L002828 – 28mm SM3270 316L003535 – 35mm SM3270 316L004242 – 42mm SM3270 316L005454 – 54mm SM3270 316L006666 – 66.7mm SM3270 316L007676 – 76.1mm SM3270 316L008888 – 88.9mm SM3270 316L00X8X8 – 108mm SLIP COUPLING SM3274 316L001515 – 15mm SM3274 316L001818 – 18mm SM3274 316L002222 – 22mm SM3274 316L002828 – 28mm SM3274 316L003535 – 35mm SM3274 316L004242 – 42mm SM3274 316L005454 – 54mm SM3274 316L006666 – 66.7mm SM3274 316L007676 – 76.1mm SM3274 316L008888 – 88.9mm SM3274 316L00X8X8 – 108mm 90 DEGREE EQUAL ELBOW SM3090 316L001515 – 15mm SM3090 316L001818 – 18mm SM3090 316L002222 – 22mm SM3090 316L002828 – 28mm SM3090 316L003535 – 35mm SM3090 316L004242 – 42mm SM3090 316L005454 – 54mm SM3090 316L006666 – 66.7mm SM3090 316L007676 – 76.1mm SM3090 316L008888 – 88.9mm SM3090 316L00X8X8 – 108mm 90 DEGREE STREET ELBOW SM3092 316L001515 – 15mm SM3092 316L001818 – 18mm SM3092 316L002222 – 22mm SM3092 316L002828 – 28mm SM3092 316L003535 – 35mm SM3092 316L004242 – 42mm SM3092 316L005454 – 54mm SM3092 316L006666 – 66.7mm SM3092 316L007676 – 76.1mm SM3092 316L008888 – 88.9mm SM3092 316L00X8X8 – 108mm 45 DEGREE EQUAL ELBOW SM3041 316L001515 – 15mm SM3041 316L001818 – 18mm SM3041 316L002222 – 22mm SM3041 316L002828 – 28mm SM3041 316L003535 – 35mm SM3041 316L004242 – 42mm SM3041 316L005454 – 54mm SM3041 316L006666 – 66.7mm SM3041 316L007676 – 76.1mm SM3041 316L008888 – 88.9mm SM3041 316L00X8X8 – 108mm 45 DEGREE STREET ELBOW SM3040 316L001515 – 15mm SM3040 316L001818 – 18mm SM3040 316L002222 – 22mm SM3040 316L002828 – 28mm SM3040 316L003535 – 35mm SM3040 316L004242 – 42mm SM3040 316L005454 – 54mm SM3040 316L006666 – 66.7mm SM3040 316L007676 – 76.1mm SM3040 316L008888 – 88.9mm SM3040 316L00X8X8 – 108mm EQUAL TEE SM3130 316L151515 – 15mm SM3130 316L181818 – 18mm SM3130 316L222222 – 22mm SM3130 316L282828 – 28mm SM3130 316L353535 – 35mm SM3130 316L424242 – 42mm SM3130 316L545454 – 54mm SM3130 316L666666 – 66.7mm SM3130 316L767676 – 76.1mm SM3130 316L888888 – 88.9mm SM3130 316LX8X8X8 – 108mm REDUCING TEE SM3131 316L181815 – 18 x 18 x 15mm SM3131 316L222215 – 22 x 22 x 15mm SM3131 316L222218 – 22 x 22 x 18mm SM3131 316L282815 – 28 x 28 x 15mm SM3131 316L282818 – 28 x 28 x 18mm SM3131 316L282822 – 28 x 28 x 22mm SM3131 316L353515 – 35 x 35 x 15mm SM3131 316L353518 – 35 x 35 x 18mm SM3131 316L353522 – 35 x 35 x 22mm SM3131 316L353528 – 35 x 35 x 28mm SM3131 316L424215 – 42 x 42 x 15mm SM3131 316L424218 – 42 x 42 x 18mm SM3131 316L424222 – 42 x 42 x 22mm SM3131 316L424228 – 42 x 42 x 28mm SM3131 316L424235 – 42 x 42 x 35mm SM3131 316L545415 – 54 x 54 x 15mm SM3131 316L545418 – 54 x 54 x 18mm SM3131 316L545422 – 54 x 54 x 22mm SM3131 316L545428 – 54 x 54 x 28mm SM3131 316L545435 – 54 x 54 x 35mm SM3131 316L545442 – 54 x 54 x 42mm SM3131 316L666628 – 66.7 x 66.7 x 28mm SM3131 316L666635 – 66.7 x 66.7 x 35mm SM3131 316L666642 – 66.7 x 66.7 x 42mm SM3131 316L666654 – 66.7 x 66.7 x 54mm SM3131 316L767622 – 76.1 x 76.1 x 22mm SM3131 316L767628 – 76.1 x 76.1 x 28mm SM3131 316L767635 – 76.1 x 76.1 x 35mm SM3131 316L767642 – 76.1 x 76.1 x 42mm SM3131 316L767654 – 76.1 x 76.1 x 54mm SM3131 316L888822 – 88.9 x 88.9 x 22mm SM3131 316L888828 – 88.9 x 88.9 x 28mm SM3131 316L888835 – 88.9 x 88.9 x 35mm SM3131 316L888842 – 88.9 x 88.9 x 42mm SM3131 316L888854 – 88.9 x 88.9 x 54mm SM3131 316L888876 – 88.9 x 88.9 x 76.1mm SM3131 316LX8X822 – 108 x 108 x 22mm SM3131 316LX8X828 – 108 x 108 x 28mm SM3131 316LX8X835 – 108 x 108 x 35mm SM3131 316LX8X842 – 108 x 108 x 42mm SM3131 316LX8X854 – 108 x 108 x 54mm SM3131 316LX8X876 – 108 x 108 x 76.1mm SM3131 316LX8X888 – 108 x 108 x 88.9mm STOP END SM3301 316L000015 – 15mm SM3301 316L000018 – 18mm SM3301 316L000022 – 22mm SM3301 316L000028 – 28mm SM3301 316L000035 – 35mm SM3301 316L000042 – 42mm SM3301 316L000054 – 54mm SM3301 316L000066 – 66.7mm SM3301 316L000076 – 76.1mm SM3301 316L000088 – 88.9mm SM3301 316L0000X8 – 108mm FULL CROSSOVER SM3085 316L001515 – 15mm SM3085 316L001818 – 18mm SM3085 316L002222 – 22mm SM3085 316L002828 – 28mm PART CORSSOVER SM3086 316L001515 – 15mm SM3086 316L001818 – 18mm SM3086 316L002222 – 22mm SM3086 316L002828 – 28mm FLANGE SM3325 316L000015 – 15mm SM3325 316L000018 – 18mm SM3325 316L000022 – 22mm SM3325 316L000028 – 28mm SM3325 316L000035 – 35mm SM3325 316L000042 – 42mm SM3325 316L000054 – 54mm SM3325 316L000066 – 66.7mm SM3325 316L000076 – 76.1mm SM3325 316L000088 – 88.9mm SM3325 316L0000X8 – 108mm REDUCED COUPLING SM3240 316L001815 – 18 x 15mm SM3240 316L002215 – 22 x 15mm SM3240 316L002218 – 22 x 18mm SM3240 316L002815 – 28 x 15mm SM3240 316L002818 – 28 x 18mm SM3240 316L002822 – 28 x 22mm SM3240 316L003515 – 35 x 15mm SM3240 316L003518 – 35 x 18mm SM3240 316L003522 – 35 x 22mm SM3240 316L003528 – 35 x 28mm SM3240 316L004215 – 42 x 15mm SM3240 316L004218 – 42 x 18mm SM3240 316L004222 – 42 x 22mm SM3240 316L004228 – 42 x 28mm SM3240 316L004235 – 42 x 35mm SM3240 316L005415 – 54 x 15mm SM3240 316L005418 – 54 x 18mm SM3240 316L005422 – 54 x 22mm SM3240 316L005428 – 54 x 28mm SM3240 316L005435 – 54 x 35mm SM3240 316L005442 – 54 x 42mm SM3240 316L006628 – 66.7 x 28mm SM3240 316L006635 – 66.7 x 35mm SM3240 316L006642 – 66.7 x 42mm SM3240 316L006654 – 66.7 x 54mm SM3240 316L007642 – 76.1 x 42mm SM3240 316L007654 – 76.1 x 54mm SM3240 316L008854 – 88.9 x 54mm SM3240 316L008876 – 88.9 x 76.1mm SM3240 316L00X854 – 108 X 54mm SM3240 316L00X876 – 108 X 76.1mm SM3240 316L00X888 - 108 X 88.9mm FITTING REDUCER SM3243 316L001815 – 18 x 15mm SM3243 316L002215 – 22 x 15mm SM3243 316L002218 – 22 x 18mm SM3243 316L002815 – 28 x 15mm SM3243 316L002818 – 28 x 18mm SM3243 316L002822 – 28 x 22mm SM3243 316L003515 – 35 x 15mm SM3243 316L003518 – 35 x 18mm SM3243 316L003522 – 35 x 22mm SM3243 316L003528 – 35 x 28mm SM3243 316L004215 – 42 x 15mm SM3243 316L004218 – 42 x 18mm SM3243 316L004222 – 42 x 22mm SM3243 316L004228 – 42 x 28mm SM3243 316L004235 – 42 x 35mm SM3243 316L005415 – 54 x 15mm SM3243 316L005418 – 54 x 18mm SM3243 316L005422 – 54 x 22mm SM3243 316L005428 – 54 x 28mm SM3243 316L005435 – 54 x 35mm SM3243 316L005442 – 54 x 42mm SM3243 316L006628 – 66.7 x 28mm SM3243 316L006635 – 66.7 x 35mm SM3243 316L006642 – 66.7 x 42mm SM3243 316L006654 – 66.7 x 54mm SM3243 316L007642 – 76.1 x 42mm SM3243 316L007654 – 76.1 x 54mm SM3243 316L008854 – 88.9 x 54mm SM3243 316L008876 – 88.9 x 76.1mm SM3243 316L00X854 – 108 x 54mm SM3243 316L00X876 – 108 x 76.1mm SM3243 316L00X888 – 108 x 88.9mm C X MI COUPLING SM3253 316L015M12 – 15 x ½” BSP (M) SM3253 316L015M34 – 15 x ¾” BSP (M) SM3253 316L018M12 – 18 x ½” BSP (M) SM3253 316L018M34 – 18 x ¾” BSP (M) SM3253 316L022M12 – 22 x ½” BSP (M) SM3253 316L022M34 – 22 x ¾” BSP (M) SM3253 316L022M10 – 22 x 1” BSP (M) SM3253 316L028M34 – 28 x ¾” BSP (M) SM3253 316L028M10 – 28 x 1” BSP (M) SM3253 316L035M10 – 35 x 1” BSP (M) SM3253 316L035MA4 – 35 x 1 ¼” BSP (M) SM3253 316L042MA4 – 42 x 1 ¼” BSP (M) SM3253 316L042MA2 – 42 x 1 ½” BSP (M) SM3253 316L054MA2 – 54 x 1 ½” BSP (M) SM3253 316L054M20 – 54 x 2” BSP (M) SM3253 316L066M20 – 66.7 x 2” BSP (M) SM3253 316L076MA2 – 76.1 x 2 ½” BSP (M) SM3253 316L088M30 – 88.9 x 3” BSP (M) C X FI COUPLING SM3250 316L015F12 – 15 x ½” BSP (F) SM3250 316L015F34 – 15 x ¾” BSP (F) SM3250 316L018F12 – 18 x ½” BSP (F) SM3250 316L018F34 – 18 x ¾” BSP (F) SM3250 316L022F12 – 22 x ½” BSP (F) SM3250 316L022F34 – 22 x ¾” BSP (F) SM3250 316L022F10 – 22 x 1” BSP (F) SM3250 316L028F34 – 28 x ¾” BSP (F) SM3250 316L028F10 – 28 x 1” BSP (F) SM3250 316L035F10 – 35 x 1” BSP (F) SM3250 316L035FA4 – 35 x 1 ¼” BSP (F) SM3250 316L042FA4 – 42 x 1 ¼” BSP (F) SM3250 316L042FA2 – 42 x 1 ½” BSP (F) SM3250 316L054FA2 – 54 x 1 ½” BSP (F) SM3250 316L054F20 – 54 x 2” BSP (F) SM3250 316L066F20 – 66.7 x 2” BSP (F) SM3250 316L076FA2 – 76.1 x 2 ½” BSP (F) SM3250 316L088F30 – 88.9 x 3” BSP (F) SWIVEL COUPLING SM3260 316L015F12 – 15 x ½” BSP Captive nut SM3260 316L018F12 – 18 x ½” BSP Captive nut SM3260 316L022F34 – 22 x ¾” BSP Captive nut SM3260 316L028F10 – 28 x 1” BSP Captive nut SM3260 316L035FA4 – 35 x 1 ¼” BSP Captive nut SM3260 316L042FA2 – 42 x 1 ½” BSP Captive nut SM3260 316L054F20 – 54 x 2” BSP Captive nut C X C X MI TEE SM3230 316L215M12 – 15 x 15 x ½” BSP (M) SM3230 316L218M12 – 18 x 18 x ½” BSP (M) SM3230 316L218M34 – 18 x 18 x ¾” BSP (M) SM3230 316L222M12 – 22 x 22 x ½” BSP (M) SM3230 316L222M34 – 22 x 22 x ¾” BSP (M) SM3230 316L228M12 – 28 x 28 x ½” BSP (M) SM3230 316L228M34 – 28 x 28 x ¾” BSP (M) SM3230 316L228M10 – 28 x 28 x 1” BSP (M) SM3230 316L235M12 – 35 x 35 x ½” BSP (M) SM3230 316L235M34 – 35 x 35 x ¾” BSP (M) SM3230 316L235MA4 – 35 x 35 x 1 ¼” BSP (M) SM3230 316L242M34 – 42 x 42 x ¾” BSP (M) SM3230 316L242MA4 – 42 x 42 x 1 ¼” BSP (M) SM3230 316L242MA2 – 42 x 42 x 1 ½” BSP (M) SM3230 316L254M34 – 54 x 54 x ¾” BSP (M) SM3230 316L254MA2 – 54 x 54 x 1 ½” SM3230 316L254M20 – 54 x 54 x 2” SM3230 316L266M34 – 66.7 x 66.7 x ¾” SM3230 316L266M20 – 66.7 x 66.7 x 2” C X C X FI TEE SM3231 316L215F12 – 15 x 15 x ½” BSP (F) SM3231 316L218F12 – 18 x 18 x ½” BSP (F) SM3231 316L218F34 – 18 x 18 x ¾” BSP (F) SM3231 316L222F12 – 22 x 22 x ½” BSP (F) SM3231 316L222F34 – 22 x 22 x ¾” BSP (F) SM3231 316L228F12 – 28 x 28 x ½” BSP (F) SM3231 316L228F34 – 28 x 28 x ¾” BSP (F) SM3231 316L228F10 – 28 x 28 x 1” BSP (F) SM3231 316L235F12 – 35 x 35 x ½” BSP (F) SM3231 316L235F34 – 35 x 35 x ¾” BSP (F) SM3231 316L242F12 – 42 x 42 x ½” BSP (F) SM3231 316L242F34 – 42 x 42 x ¾” BSP (F) SM3231 316L254F12 – 54 x 54 x ½” BSP (F) SM3231 316L254F34 – 54 x 54 x ¾” BSP (F) SM3231 316L254F20 – 54 x 54 x 2” BSP (F) SM3231 316L266F34 – 66.7 x 66.7 x ¾” BSP (F) SM3231 316L266F20 – 66.7 x 66.7 x 2” BSP (F) SM3231 316L276F34 – 76.1 x 76.1 x ¾” BSP (F) SM3231 316L276F20 – 76.1 x 76.1 x 2” BSP (F) SM3231 316L288F34 – 88.9 x 88.9 x ¾” BSP (F) SM3231 316L288F20 – 88.9 x 88.9 x 2” BSP (F) SM3231 316L2X8F34 – 108 x 108 x ¾” BSP (F) SM3231 316L2X8F20 – 108 x 108 x 2” BSP (F) C X MI 90D ELBOW SM3190 316L015M12 – 15 x ½” BSP (M) SM3190 316L015M34 – 15 x ¾” BSP (M) SM3190 316L018M12 – 18 x ½” BSP (M) SM3190 316L022M12 – 22 x ½” BSP (M) SM3190 316L022M34 – 22 x ¾” BSP (M) SM3190 316L022M10 – 22 x 1” BSP (M) SM3190 316L028M34 – 28 x ¾” BSP (M) SM3190 316L028M10 – 28 x 1” BSP (M) SM3190 316L035M10 – 35 x 1” BSP (M) SM3190 316L035MA4 – 35 x 1 ¼” BSP (M) SM3190 316L042MA2 – 42 x 1 ½” BSP (M) SM3190 316L054MA2 – 54 x 1 ½” BSP (M) SM3190 316L054M20 – 54 x 2” BSP (M) SM3190 316L066M20 – 66.7 x 2” BSP (M) SM3190 316L076MA2 – 76.1 x 76.1 x 2 ½” BSP (M) SM3190 316L088M30 – 88.9 x 88.9 x 3” BSP (M) C X FI 90D ELBOW SM3191 316L015F12 – 15 x ½” BSP (F) SM3191 316L018F12 – 18 x ½” BSP (F) SM3191 316L022F34 – 22 x ¾” BSP (F) SM3191 316L028F10 – 28 x 1” BSP (F) SM3191 316L035FA4 – 35 x 1 ¼” BSP (F) SM3191 316L042FA2 – 42 x 1 ½” BSP (F) SM3191 316L054F20 – 54 x 2” BSP (F) SM3191 316L066F20 – 66.7 x 2” BSP (F) C X MI 90D SHORT ELBOW SM3290 316L015M12 – 15 x ½” BSP (M) SM3290 316L018M12 – 18 x ½” BSP (M) SM3290 316L022M34 – 22 x ¾” BSP (M) SM3290 316L028M10 – 28 x 1” BSP (M) SM3290 316L035MA4 – 35 x 1 ¼” BSP (M) SM3290 316L042MA2 – 42 x 1 ½” BSP (M) SM3290 316L054M20 – 54 x 2” BSP (M) C X FI 90D SHORT ELBOW SM3291 316L015F12 – 15 x ½” BSP (F) SM3291 316L018F12 – 18 x ½” BSP (F) SM3291 316L022F12 – 22 x ½” BSP (F) SM3291 316L022F34 – 22 x ¾” BSP (F) SM3291 316L028F10 – 28 x 1” BSP (F) SM3291 316L035FA4 – 35 x 1 ¼” BSP (F) CXFI 90D WALLPLATE ELBOW SM3390 316L015F12 – 15 x ½” BSP (F) SM3390 316L018F12 – 18 x ½” BSP (F) SM3390 316L022F34 – 22 x ¾” BSP (F) SM3390 316L028F10 – 28 x 1” BSP (F) SM3390 316L035FA4 – 35 x 1 ¼” BSP (F)

Approval Holder:: Linhai Yongsheng Pipe Co., Ltd

Company Name
Linhai Yongsheng Pipe Co., Ltd
Address
NO 7-270 FENXI VILLAGE DUQIAO LINHAI
Country
Zhejiang
Phone
0086-576-85528969

View All Listings by this Company
Manufacturer:: Linhai Yongsheng Pipe Co., Ltd

Company Name
Linhai Yongsheng Pipe Co., Ltd
Address
NO 7-270 FENXI VILLAGE DUQIAO LINHAI
Country
Zhejiang
Phone
0086-576-85528969

View All Listings by this Company

WRAS Approval Number: #2305343

Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2305343
Size:: see model
Marking:: EN1254-2 & size on nut. HonSon logo (ISI) on fitting body
Installation Requirements:: R001
Expiry date:: 31/05/2028
Model:: HS100-001 Equal Straight: HS100-001-01 8×8, HS100-001-02 10×10, HS100-001-03 12×12, HS100-001-04 14×14, HS100-001-05 15×15, HS100-001-06 16×16, HS100-001-07 18×18, HS100-001-08 22×22, HS100-001-09 28×28, HS100-001-13 15×15 (82mm length), HS100-001-14 22×22 (82mm length). HS100-002 Reducing Straight: HS100-002-01 10×8, HS100-002-02 12×8, HS100-002-03 12×10, HS100-002-04 15×8, HS100-002-05 15×10, HS100-002-06 15×12, HS100-002-07 18×15, HS100-002-08 22×15, HS100-002-09 22×18, HS100-002-10 28×15, HS100-002-11 28×22. HS100-003 Female Straight: HS100-003-01 8×1/4" F, HS100-003-02 8×3/8" F, HS100-003-03 10×1/4" F, HS100-003-04 10×3/8" F, HS100-003-05 10×1/2" F, HS100-003-06 12×3/8" F, HS100-003-07 12×1/2" F, HS100-003-08 14×3/8" F, HS100-003-09 14×1/2" F, HS100-003-10 15×1/4" F, HS100-003-11 15×3/8" F, HS100-003-12 15×1/2" F, HS100-003-13 15×3/4" F, HS100-003-14 15×1" F, HS100-003-15 16×1/2"F, HS100-003-16 16×3/4" F, HS100-003-17 18×1/2" F, HS100-003-18 18×3/4" F, HS100-003-19 22×1/2" F, HS100-003-20 22×3/4" F, HS100-003-21 22×1" F, HS100-003-22 28×3/4" F, HS100-003-23 28×1" F. HS100-004 Male Straight: HS100-004-01 8×1/8"M, HS100-004-02 8×1/4"M, HS100-004-03 8×3/8"M, HS100-004-04 8×1/2"M, HS100-004-05 10×1/4"M, HS100-004-06 10×3/8"M, HS100-004-07 10×1/2"M, HS100-004-08 12×3/8"M, HS100-004-09 12×1/2"M, HS100-004-10 14×3/8"M, HS100-004-11 14×1/2"M, HS100-004-12 14×3/4"M, HS100-004-13 15×1/4"M, HS100-004-14 15×3/8"M, HS100-004-15 15×1/2"M, HS100-004-16 15×3/4"M, HS100-004-17 16×1/2"M, HS100-004-18 16×3/4"M, HS100-004-19 18×1/2"M, HS100-004-20 18×3/4"M, HS100-004-21 22×1/2"M, HS100-004-22 22×3/4"M, HS100-004-23 22×1"M, HS100-004-24 22×1 1/4"M, HS100-004-25 28×3/4"M, HS100-004-26 28×1"M. HS100-005 Equal Elbow HS100-005-01 8×8, HS100-005-02 10×10, HS100-005-03 12×12, HS100-005-04 14×14, HS100-005-05 15×15, HS100-005-06 16×16, HS100-005-07 18×18, HS100-005-09 22×22, HS100-005-11 28×28. HS100-006 Female Elbow: HS100-006-01 8×1/4"F, HS100-006-02 10×3/8"F, HS100-006-03 12×1/2"F, HS100-006-04 14×1/2"F, HS100-006-05 15×1/2"F, HS100-006-06 15×3/4"F, HS100-006-07 16×1/2"F, HS100-006-08 18×1/2"F, HS100-006-09 18×3/4"F, HS100-006-10 22×1/2"F, HS100-006-11 22×3/4"F, HS100-006-12 22×1"F, HS100-006-13 28×1"F. HS100-007 Male Elbow: HS100-007-01 8×1/4"M, HS100-007-02 10×1/4"M, HS100-007-03 10×3/8"M, HS100-007-04 12×1/2"M, HS100-007-05 14×1/2"M, HS100-007-06 15×1/4"M, HS100-007-07 15×3/8"M, HS100-007-08 15×1/2"M, HS100-007-09 15×3/4"M, HS100-007-10 16×1/2"M, HS100-007-11 18×1/2"M, HS100-007-12 18×3/4"M, HS100-007-13 22×1/2"M, HS100-007-14 22×3/4"M, HS100-007-15 22×1"M, HS100-007-16 28×1"M. HS100-008 Equal Tee: HS100-008-01 8×8×8, HS100-008-02 10×10×10, HS100-008-03 12×12×12, HS100-008-04 14×14×14, HS100-008-05 15×15×15, HS100-008-06 16×16×16, HS100-008-07 18×18×18, HS100-008-08 22×22×22, HS100-008-09 28×28×28. HS100-009 Reducing Tee: HS100-009-01 15×15×22, HS100-009-02 18×18×15, HS100-009-03 18×15×18, HS100-009-04 22×15×15, HS100-009-05 22×15×22, HS100-009-06 22×22×15, HS100-009-07 22×22×18, HS100-009-08 28×22×15, HS100-009-09 28×28×15, HS100-009-10 28×15×28, HS100-009-11 28×22×22, HS100-009-12 28×28×22, HS100-009-13 28×22×28. HS100-010 Female Tee: HS100-010-01 12×1/2“F, HS100-010-03 15×1/2“F, HS100-010-05 18×1/2“F, HS100-010-06 18×3/4“F, HS100-010-07 22×1/2”F, HS100-010-08 22×3/4”F, HS100-010-09 28×1/2”F, HS100-010-10 28×3/4”F, HS100-010-11 28×1”F. HS100-011 Wallplate Elbow: HS100-011-01 12×1/2"F, HS100-011-02 14×1/2"F, HS100-011-03 15×1/2"F, HS100-011-05 18×1/2"F, HS100-011-06 18×3/4"F, HS100-011-07 22×1/2"F, HS100-011-08 22×3/4"F. HS100-012 Water Tank Connector : HS100-012-01 15, HS100-012-02 22, HS100-012-03 28. HS100-013 Stop End: HS100-013-01 8, HS100-013-02 10, HS100-013-03 12, HS100-013-04 15, HS100-013-05 18, HS100-013-06 22, HS100-013-07 28. HS100-014 Str Tap Connector: HS100-014-01 15×1/2"F, HS100-014-02 15×3/4"F, HS100-014-03 22×3/4"F. HS100-015 Bent Tap Connector: HS100-015-01 15×1/2"F, HS100-015-02 22×3/4"F. HS100-016 Crossover Bridge: HS100-016-01 15×15, HS100-016-02 18×18, HS100-016-03 22×22. HS100-017 Reduced Riece: HS100-017-01 15×8, HS100-017-02 15×10, HS100-017-03 22×15, HS100-017-04 28×15, HS100-017-05 28×22. HS100-018 3 Part Reduced Set: HS100-018-01 10×8, HS100-018-02 12×8, HS100-018-03 15×8, HS100-018-04 15×10, HS100-018-05 15×12, HS100-018-06 22×15, HS100-018-07 28×15, HS100-018-08 28×22. HS100-019 Water Tank Connector: HS100-019-01 15×1/2"M, HS100-019-02 22×3/4"M, HS100-019-03 28×1"M. HS100-020 45 Degree Elbow: HS100-020-01 15×15, HS100-020-02 22×22, HS100-020-03 28×28.

Approval Holder:: Wenling Honson Brassware Co., Ltd

Company Name
Wenling Honson Brassware Co., Ltd
Address
Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515
Country
China

View All Listings by this Company
Manufacturer:: Wenling Honson Brassware Co., Ltd

Company Name
Wenling Honson Brassware Co., Ltd
Address
Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515
Country
China

View All Listings by this Company

WRAS Approval Number: #2208820

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2208820
Size:: End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).
Marking:: HAILIANG, size & PN on body.
Installation Requirements:: R001
Expiry date:: 31/08/2027
Model:: 659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2112370

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2112370
Size:: see models
Marking:: Valtech on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:: Ningbo Valtech Flow Control Co. Ltd.

Company Name
Ningbo Valtech Flow Control Co. Ltd.
Address
Room 610 New Oriental Times Building No.1130
Country
Baizhang East Road
Phone
0574-88001556

View All Listings by this Company

WRAS Approval Number: #2305345

Range of float operated electrical switches with plastic bodies. Cold water use only.

Section:: 1300 Float Operated Electrical Switches
Marking:: TOTO on adhesive label on body.
Installation Requirements:: R001 R008
Expiry date:: 31/05/2028
Model:: TOTO FS001 (5V/0,2A switch point 19mm / 51mm), TOTO FS002 (5V/0,2A switch point 19mm / 39mm).

Approval Holder:: TOTO Europe GmbH

Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

WRAS Approval Number: #2303024

Range of ultrasonic water meters with plastic (PL) or brass (BR) bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating Temperature 50 C

Section:: 1505 Water Meters
Size:: 1” BSP (M).
Marking:: Sagemcom logo, type of meter, CE and year of manufacturer (YY) on faceplate of meter.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: Siconia WM 20 range Full model code example: WM 20 L 868 I BR 110 R250 Q4 T30 VDF CUST All available options as follows: Product Type: WM = WM: IP68 product. Thread: 20 = DN20: thread reference diameter (G1”). Radio: L = LoRa™ radio, M = Wireless MBus radio, NB = 4G CAT-NBloT radio, CM = 4G CAT-M radio. Frequency: 868 = 868 MHz frequency band (LoRa™, Wireless MBus radio), 8-20 = 4G frequencies band. Country: I = I for India country band definition (optional). Product pipe (body) material: BR = Brass pipe, PL = Plastic pipe. Product pipe length: 130 = Pipe Length in mm (Brass Only), 165 = Pipe Length in mm (Brass & Plastic), 190 = Pipe Length in mm (Brass & Plastic). Ratio: R250 = R MID ratio. Q3: Q2.5 = Q3 MID reference flow and associated inlet/transducer. Here Q3=2.5m3/h, Q4 = Q3=4.0m3/h. Temperature: T50 = MID temperature range. Phone Cell Carrier: VDF = Vodafone carrier, VZW = Verizon carrier. Configuration: PROTO = Product configuration and security. CUST = Customer name.

Approval Holder:: Sagemcom Energy & Telecom

Company Name
Sagemcom Energy & Telecom

View All Listings by this Company

WRAS Approval Number: #2304050

Range of in-line ultrasonic water meters with DZR brass bodies. The following sizes only include a plastic strainer, DN15 - DN32 sizes (incorporated), DN40 size (optional). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1505 Water Meters
Size:: DN15 = ¾” BSP (M), DN20 = 1” BSP (M), DN25 = 1¼” BSP (M), DN32 = 1½” BSP (M), DN40 = DN40 Flanged or 2” BSP (M), DN50 = DN50 Flanged or 2½” BSP (M).
Marking:: Diehl logo, Hydrus, CE, size, pressure and other technical information on casing.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: HYDRUS 1.3 Type 171 range: DN15, with 110, 165 & 170mm length, DN20, with 110, 130, 165, 175, 190 & 220mm length, DN25, with 150, 175, & 260mm length, DN32, with 260mm length, DN40, with 200 & 300mm length (200mm not available on flanged model), DN50, with 270 & 300mm length.

Approval Holder:: Diehl Metering GmbH & Diehl Metering Poland.

Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company
Manufacturer:: Diehl Metering GmbH & Diehl Metering Poland.

Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

WRAS Approval Number: #2305058

Range of water meters with brass (CW724R & CC770S) and plastic (Composite) bodies, incorporating plastic strainers and EPDM ‘O’- rings. Maximum working pressure 16.0 Bar. Temperature: 60.0°C for brass (CW724R & CC770S) models & Cold water use only for composite models.

Section:: 1505 Water Meters
Size:: DN15 – 3.4” BSP (M), DN20 – 1” BSP (M), DN25 – 1.1/4” BSP (M) or DN25 Flanged, DN32 – 1.1/2” BSP (M) or DN32 Flanged, DN40 – 2” BSP (M) or DN40 Flanged.
Marking:: Hydrus, Diehl Metering and product info on casing. Flow arrow on body and cover.
Installation Requirements:: R001
Expiry date:: 31/05/2028
Model:: HYDRUS 2 (CW724R): DN15 – Lengths 110, 165 & 170mm, DN20 – Lengths 105, 130, 165, 175, 190 & 220mm, DN25 – Lengths 135, 150, 175 & 260mm, DN32 – Length 260mm, DN40 – Lengths 200 & 300mm. HYDRUS 2 (CC770S): DN25 – Length 260mm, DN32 – Length 260mm, DN40 – Length 300mm. HYDRUS 2 (Composite): DN15 – Lengths 110, 115, 165 & 170mm, DN20 – Length 190mm.

Approval Holder:: Diehl Metering GmbH & Diehl Metering Poland.

Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company
Manufacturer:: Diehl Metering GmbH & Diehl Metering Poland.

Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

WRAS Approval Number: #2304325

Talbot Modular Manifold System with and without concentric water meter connections with plastic bodies incorporating screw down stopvalves. Maximum working pressure 16 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Size:: see model
Marking:: Talbot (brand of Atlantic Plastics Ltd.) on manifold body.
Installation Requirements:: R001 R120
Expiry date:: 30/04/2028
Model:: 2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet and concentric connection x 25mm PE outlet E3707, MANIF 2 PF 50 X 25MM E3708, MANIF 3 PF 50 X 25MM E3709, MANIF 4 PF 50 X 25MM E3710, MANIF 5 PF 50 X 25MM E3711, MANIF 6 PF 50 X 25MM E3712, MANIF 7 PF 50 X 25MM E3713, MANIF 8 PF 50 X 25MM E3714 MANIF 9 PF 50 X 25MM E3715, MANIF 10 PF 50 X 25MM E3716, MANIF 11 PF 50 X 25MM E3717 MANIF 12 PF 50 X 25MM E3718, MANIF 2 PF 63 X 25MM E3719, MANIF 3 PF 63 X 25MM E3720, MANIF 4 PF 63 X 25MM E3721 MANIF 5 PF 63 X 25MM E3722, MANIF 6 PF 63 X 25MM E3723, MANIF 7 PF 63 X 25MM E3724, MANIF 8 PF 63 X 25MM E3725 MANIF 9 PF 63 X 25MM E3726, MANIF 10 PF 63 X 25MM E3727, MANIF 11 PF 63 X 25MM E3728 MANIF 12 PF 63 X 25MM Talbot Modular Manifold System 2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet x ¾” BSP; 25mm outlets E3751 MANIF 2 PF 50 X 25MM E3752 MANIF 3 PF 50 X 25MM E3753 MANIF 4 PF 50 X 25MM E3754 MANIF 5 PF 50 X 25MM E3755 MANIF 6 PF 50 X 25MM E3756 MANIF 7 PF 50 X 25MM E3757 MANIF 8 PF 50 X 25MM E3758 MANIF 9 PF 50 X 25MM E3759 MANIF 10 PF 50 X 25MM E3760 MANIF 11 PF 50 X 25MM E3761 MANIF 12 PF 50 X 25MM E3762 MANIF 2 PF 63 X 25MM E3763 MANIF 3 PF 63 X 25MM E3764 MANIF 4 PF 63 X 25MM E3765 MANIF 5 PF 63 X 25MM E3766 MANIF 6 PF 63 X 25MM E3767 MANIF 7 PF 63 X 25MM E3768 MANIF 8 PF 63 X 25MM E3769 MANIF 9 PF 63 X 25MM E3770 MANIF 10 PF 63 X 25MM E3771 MANIF 11 PF 63 X 25MM E3772 MANIF 12 PF 63 X 25MM

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #2212320

Range of tap outlets with plastic bodies incorporating a filter within the body with a hollow fibre filter membrane The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a plastic flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 2212320
Note:: Claims made by the manufacturer of performance have not been assessed and are not part of this approval
Size:: Please refer to model.
Marking:: T Safe logo, data matrix code, Model No and other tech info on body.
Installation Requirements:: R001 R040
Expiry date:: 31/12/2027
Model:: 02-831200 Medical Tap Filter 92 Day, Standard Flow (19.33mm pushfit). 02-831201/02-831201CE Medical Tap Filter 92 Day, Laminar Flow (19.29mm pushfit). 02-831202 Medical Tap Filter 31 Day, Standard Flow (19.08mm pushfit). 02-831203/02-831203CE Medical Tap Filter 31 Day, Laminar Flow (19.34mm pushfit). 02-831204 Medical Tap Filter 92 Day, Standard Flow, Sterile Packed (19.33mm pushfit). 02-831205 Medical Tap Filter 92 Day, Laminar Flow, Sterile Packed (19.29mm pushfit). 02-831206 Medical Tap Filter 31 Day, Standard Flow, Sterile Packed (19.08mm pushfit). 02-831207 Medical Tap Filter 31 Day, Laminar Flow, Sterile Packed (19.34mm pushfit). Models added August 2024: 02-831210 Medical Tap Filter Side Mount 62 day LF (19.29mm pushfit). 02-831212 Medical Tap Filter Side Mount 62 day SF (19.33mm pushfit).

Approval Holder:: T-safe A/S

Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company
Manufacturer:: T-safe A/S

Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company

WRAS Approval Number: #2212040

Range of shower elbows/holders with brass or stainless-steel bodies (various finishes). The elbows incorporate a plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models VOLA 070-XX & VOLA 070R-XX are supplied with a shower hose and handset.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2212040
Note:: Open outlet use only.
Marking:: VOLA on body of shower elbows/holders
Installation Requirements:: R001 R040
Expiry date:: 31/12/2027
Model:: Elbow & wall plate: VOLA 070-T2-XX. VOLA 070R-T2-XX. VOLA 070-HT2-XX. Elbow, wall plate, hand shower & hose: VOLA 070-XX. VOLA 070R-XX. XX denotes finish and, on models with brass bodies, is replaced with: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey,12=Mocca,14=Bright Red,15=Dark Blue, 16=Chrome,17=Gloss Black,18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, 61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. XX denotes finish and, on models with stainless steel bodies, is replaced with: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #2305702

Range of ceiling or wall mounted shower outlets, (brass or stainless-steel bodies - various finishes) incorporating EPDM `O` rings. Maximum operating temperature 60.0°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2305702
Note:: Open outlet use only.
Size:: ¾” BSP (M)
Marking:: VOLA on shower face
Installation Requirements:: R001 R040
Expiry date:: 31/05/2028
Model:: VOLA 060-XX Brass VOLA 060-XX Stainless Steel VOLA 060A-XX Brass VOLA 060A-XX Stainless steel Model VOLA 060-XX, VOLA 060A-XX. Brass and Stainless-Steel variants are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #2304045

A range of ceiling mounted and wall mounted shower outlets (brass and stainless-steel bodies - various finishes) incorporating EPDM O-rings.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2304045
Note:: Open outlet use only.
Size:: ¾” BSP (M)
Marking:: VOLA on body
Installation Requirements:: R001 R040
Expiry date:: 30/04/2028
Model:: VOLA 050-XX Head shower, Wall mounted VOLA 050A-XX Head shower, Ceiling mounted VOLA 050K-XX Adjustable body jet Model VOLA 050-XX, VOLA 050A-XX, VOLA 050K-XX. Brass and Stainless-Steel variants are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #2304331

Range of shower handsets and an overhead shower outlet with plastic bodies (chrome plated, chrome plated/white or chrome plated/black coloured finish - see model). The inlet of the 2.1981.018 model incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Non-metallic materials and components comply with BS6920 at 55°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2304331
Note:: Open outlet use only.
Size:: Shower handsets: ½” BSP (M). Overhead shower: ½” BSP (F).
Marking:: Shower handsets: Mira Showers on body. Overhead shower: Kohler Mira Limited on body.
Installation Requirements:: R001 R040
Expiry date:: 30/04/2028
Model:: Shower handsets: 2.1981.017 (MODULE: 1504265) MIRA 360 HANDSET (chrome plated handset/white rotating outlet), 2.1981.018 (MODULE: 148927) MIRA 360 HANDSET (chrome plated handset/black rotating outlet). Overhead shower: 2.1981.019 (MODULE: 148927) MIRA SIGNATURE OVERHEAD (chrome plated)

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

WRAS Approval Number: #2305034

Range of shower outlets (brass or stainless-steel bodies – various finishes) incorporating EPDM O-rings. Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2305034
Size:: ¾” BSP (M)
Marking:: VOLA logo on body
Installation Requirements:: R001 R040
Expiry date:: 31/05/2028
Model:: 080W-XX Brass 080W-XX Stainless-steel ‘xx’ denotes the surface finish and is replaced by: 02=grey; 04=blue; 05=orange; 06=green; 08=yellow; 09=dark grey; 12=mocha; 14=orange-red; 15=dark blue; 16=chrome; 17=black; 18=white; 19=brass(raw); 20=brushed chrome; 21=red; 25=pink; 27=dull black; 40=Stainless Steel; 60=black chrome; 61=brushed black chrome; 62=piano black; 63=copper; 64=brushed copper; 65=bright gold; 66=dark gold; 67=brushed dark gold; 68=nickel; 69=brushed nickel; 70=brushed bright gold.

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #2304319

Wall mounted shower outlet (brass body – various finishes). The product is supplied with shower hose and handset that incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2304319
Size:: ½” BSP (F)
Marking:: Graff on back plate
Installation Requirements:: R001 R040
Expiry date:: 30/04/2028
Model:: E-8627-yy-T “T” – means that product doesn’t include CV valve. ‘yy’ at the end of model denotes finish, and can be replaced with: 1. PC polished chrome 11. BB Brushed Brass PVD 2. SN Steelnox® Satin Nickel 12. GM Gunmetal 3. BNi Brushed Nickel 13 MBK Matt Black 4. PN Polished Nickel 14 OX Onyx PVD 5. OB. Olive Bronze 15. PB Polished Brass PVD 6. BK Black 16. RG OR’osa PVD 7. WT White 17. UBB Un-Finished brushed Brass 8. UB Un-Finished Brass 18. VBB Vintage Brass Finish 9. BAu Brushed 24K Gold 19. BOX Brushed Onyx PVD 10. AU 24K Gold 20. BRG Brushed OR’osa PVD

Approval Holder:: Graff Faucets Co.

Company Name
Graff Faucets Co.
Address
3701 W. Burnham St. Milwaukee, WI 5315
Country
USA
Phone
+1 414.649.9850
General Email
techsupport@graff-faucets.com

View All Listings by this Company

WRAS Approval Number: #2306066

Wall mounted and ceiling mounted shower arms (chromium plated brass).

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2306066
Note:: Open outlet use only.
Size:: ½” BSP (M).
Marking:: Bonomi on body.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2028
Model:: 302132/49A - Wall Mounted Arm, 112232/19A - Ceiling Mounted Arm.

Approval Holder:: Idrosanitaria Bonomi SpA

Company Name
Idrosanitaria Bonomi SpA
Address
Via Monsuello, 36 Lumezzane S.S Brescia
Postcode
25065
Country
Italy
Phone
+39 030 8922111
General Email
massimoplati@idrobonomi.com

View All Listings by this Company
Manufacturer:: Idrosanitaria Bonomi SpA

Company Name
Idrosanitaria Bonomi SpA
Address
Via Monsuello, 36 Lumezzane S.S Brescia
Postcode
25065
Country
Italy
Phone
+39 030 8922111
General Email
massimoplati@idrobonomi.com

View All Listings by this Company

WRAS Approval Number: #2305307

Pillar taps with chromium plated - brass bodies incorporating a quarter turn ceramic disc headwork, with single lever type operating members. The spout outlet incorporates a flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 45°C

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2305307
Size:: ¾” BSP(M)
Marking:: Mira Showers on rear of body
Installation Requirements:: R001 R005
Expiry date:: 31/05/2028
Model:: 1.1900.041 – Mira Assist.Pillar Tap

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

WRAS Approval Number: #2304006

Range of stainless-steel interlocked, PVC lined shower hoses available in lengths between 50cm & 200cm.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2304006
Note:: Open outlet use only
Size:: ½” BSP (F)
Marking:: Jetom, WRAS and the year of manufacture “YYYY” on conical nut or ferrule
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: H1143, H21K5, H2104, H21H7, H2101, H2125, H2105, H2194, H21B1, H2114, H2201, H2225, H2205, H2294, H22B1, H2214, H2301, H2394, H23B1, H2314, H2307, H2306, H23J2, H2401, H2425, H2405, H2494, H24B1, H2414, H2128, H2158, H2130, H2228, H2258, H2230, H2328, H2358, H2330, H2428, H2458 & H2430.

Approval Holder:: Quanzhou Jetom Hose Industry Co. Ltd.

Company Name
Quanzhou Jetom Hose Industry Co. Ltd.
Address
High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province
Postcode
362000
Country
China
Phone
+86 595 68979514
General Email
dingqingfeng@jetom.com.cn

View All Listings by this Company
Manufacturer:: Quanzhou Jetom Hose Industry Co. Ltd.

Company Name
Quanzhou Jetom Hose Industry Co. Ltd.
Address
High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province
Postcode
362000
Country
China
Phone
+86 595 68979514
General Email
dingqingfeng@jetom.com.cn

View All Listings by this Company

WRAS Approval Number: #2306017

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306017
Size:: Please refer to model.
Marking:: Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: UKWR denotes the customer code and is replaced with XX. L denotes the length of the hose (between 50mm & 4,000mm) and is replaced with L50 to L4000. DG10E-UKWR-001-L (15mm compression x M10) - Bore size DN8. DG10E-UKWR-002-L (15mm compression x M12) - Bore size DN8. DG10E-UKWR-003-L (10mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-004-L (15mm compression x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-005-L (F ½" BSP X F ½" BSP) - Bore size DN10. DG10E-UKWR-006-L (15mm compression iso valve x F ½"BSP) - Bore size DN10. DG10E-UKWR-007-L (15mm push fit iso valve x 15mm push fit) - Bore size DN10. DG10E-UKWR-008-L (22mm compression iso valve x F ¾" BSP) - Bore size DN13. DG10E-UKWR-009-L (22mm x F ¾" BSP) - Bore size DN13. DG10E-UKWR-011-L (15mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-012-L (15mm compression x F ½" BSP) - Bore size DN10. DG10E-UKWR-013-L (15mm compression x 10mm compression) - Bore size DN10. DG10E-UKWR-015-L (15mm compression x 15mm compression) - Bore size DN10. DG10E-UKWR-014-L (15mm compression x F ¾" BSP) - Bore size DN10. DG10E-UKWR-016-L (15mm compression x 22mm compression) - Bore size DN10. DG10E-UKWR-017-L (F ½” BSP x 22mm compression) - Bore size DN10. DG10E-UKWR-018-L (15mm compression iso valve x F ¾" BSP) - Bore size DN10. DG10E-UKWR-019-L (15mm push fit x M10) - Bore size DN10. DG10E-UKWR-020-L (15mm push-fit x M12) - Bore size DN10. DG10E-UKWR-021-L (15mm push-fit x F ¾" BSP) - Bore size DN10. DG10E-UKWR-022-L (15mm push fit x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-023-L (15mm push-fit x 15mm compression) - Bore size DN10. DG10E-UKWR-024-L (15mm push-fit x 15mm push fit) - Bore size DN10. DG10E-UKWR-025-L (F ¾" BSP x F ¾" BSP) - Bore size DN13. DG10E-UKWR-026-L (22mm compression x 22mm compression) - Bore size DN13. DG10E-UKWR-029-L (F ½” x M10) - Bore size DN8. DG10E-UKWR-030-L (F ⅜” x M10) - Bore size DN8. DG10E-UKWR-031-L (15mm compression iso valve x 15mm compression) - Bore size DN10. DG10E-WRAS-034-L (F3/4” x F3/4” elbow) - Bore size DN10. DG10E-QY-007-L (F ⅜” x F⅜”) - Bore size DN8. DG10E-QY-008-L (F⅜” x F⅜” elbow) - Bore size DN8. DG10E-834-001-L (F⅜" X F¼") - Bore size DN8. DG10E-UKWR-032-L (F½" x M½") - Bore size DN13, DG10E-UKWR-033-L (15mm x M½") - Bore size DN13, DG10E-UKWR-035-L (F¾" x M¾") - Bore size DN13 & DG10E-UKWR-036-L (F½" x F½" Elbow) - Bore size DN10. DG10E-WRAS-038-L (F½" x M½") - Bore size DN8 DG10E-XC-002-L (F½" BSP X F½" BSP) - Bore size DN8 DG10E-A007010-028-L(F1/2”X15mm compression iso valve)-Bore size DN13 DG10E-EWT-003-L(F1/2”XF1/2”)-Bore size DN13 DG10E-A007010-027-L(F1/2”X15mm)-Bore size DN13 DG10E-A007119-019-L(22mm X 22mm with iso valve)-Bore size DN13 DG10E-A007010-037-L(15mm X 15mm)-Bore size DN13 DG10E-A007010-013-L(15mm X M12x1 Short)-Bore size DN10 DG10E-SCS-001-L(F1/2”X14.7mm with iso valve) - Bore size DN10 DG10E-SCS-002-L(F3/4”X21mm with iso valve)-Bore size DN13 DG10E-A007010-014-L(15mm X M12x1 Long)-Bore size DN10 DG10E-TECH-001-L (F1/2"XM12)-Bore size DN8.

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

WRAS Approval Number: #2306072

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306072
Size:: Please refer to model.
Marking:: FLOMASTA (Brand of Kingfisher), WRAS and date of manufacture (YYYY) on crimped sleeve. Models added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: 05272204 (15mm compression x M10) - Bore size DN8. 05272198 (15mm compression x M12) - Bore size DN8. 05272310 (F ½" BSP X F ½" BSP) - Bore size DN10. 05272174(15mm compression iso valve x F ½"BSP) - Bore size DN10. 5052931708345 (22mm compression iso valve x F ¾" BSP) - Bore size DN13. 05272150, 05272167 (22mm x F ¾" BSP) - Bore size DN13. 05272181 (15mm compression x F ⅜" BSP) - Bore size DN10. 05272228 (15mm compression x F ½" BSP) - Bore size DN10. 05272402 (15mm compression x 10mm compression) - Bore size DN10. 05272242 (15mm compression x 15mm compression) - Bore size DN10. 05272327 (15mm compression x F ¾" BSP) - Bore size DN10. 05272280 (15mm compression x 22mm compression) - Bore size DN10. 5052931708352 (15mm compression iso valve x F ¾" BSP) - Bore size DN10. Models Added December 2023: 05272334, 05272372, 05272396 (22mmxF3/4" BSP)-Bore size DN13. 5052931675531,, 05272303, 05272358, 05272389, 5052931675548 (15mm compression xF½"BSP)- Bore size DN10. 05272365 (15mm compressionxF"BSP) Bore size DN10. 5052931462629, 05272273, 05272341(15mm compressionx15mm compression)- Bore size DN10. 05280469 (F ½"BSPXF½"BSP)-Bore size DN10. 05272266 (15mm compression iso valve xF½"BSP)- Bore size DN10.

Approval Holder:: Kingfisher International Products Ltd

Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

WRAS Approval Number: #2210057

Range of stainless steel indirect (single or twin coil), direct and heat pump unvented hot water storage cylinders. The heat pump models also incorporate a plate heat exchanger and a circulation pump. The secondary circuit is supplied with a temperature and pressure relief valve set at 7.0 bar@90.0˚C. The products are supplied with an inlet control group consisting of an adjustable pressure reducing valve, adjustable in the range of 0.8 bar - 6.0 bar, but factory pre-set at 3.0 bar, a strainer, am expansion relief valve set at 6.0 bar and an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The products are also supplied with an immersion heater, an expansion vessel (12, 19 or 24 litres depending on model) and a tundish. Maximum supply pressure to the inlet control group: 16.0 bar. Maximum working pressure: Secondary circuit: 5.5 Bar. Primary Circuit: 6.0 Bar (All models except for the Direct - DI prefix models). Maximum operating temperature 75°C.

Section:: 1890 Unvented Heating Apparatus
WRAS Approval Number:: 2210057
Note:: R008 only applies to the HP prefix (Heat Pump) models. Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:: Secondary circuit: 22mm compression. Primary circuit: 22mm compression or 28mm stub (Heat Pump models only).
Marking:: WARMFLOW logo, capacity, model name, maximum pressure, maximum temperature, date of manufacture (month/YYYY) and other technical info on adhesive label on body.
Installation Requirements:: R001 R008 R360
Expiry date:: 31/10/2027
Proviso:: All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°C and 45°C.
Model:: DI110UV - Direct Unvented water cylinder, DI140UV - Direct Unvented water cylinder, DI170UV - Direct Unvented water cylinder, DI200UV - Direct Unvented water cylinder, DI240UV - Direct Unvented water cylinder, DI290UV - Direct Unvented water cylinder. IN110UV - Indirect Unvented water cylinder, IN140UV - Indirect Unvented water cylinder, IN170UV - Indirect Unvented water cylinder, IN200UV - Indirect Unvented water cylinder, IN240UV - Indirect Unvented water cylinder, IN290UV - Indirect Unvented water cylinder. C140UV - Indirect Unvented water cylinder, C170UV - Indirect Unvented water cylinder, C200UV - Indirect Unvented water cylinder. TW170UV - Twin coil indirect Unvented water cylinder, TW200UV - Twin coil indirect Unvented water cylinder, TW240UV - Twin coil indirect Unvented water cylinder, TW290UV - Twin coil indirect Unvented water cylinder. HP170UV - Heat pump indirect unvented water cylinder, HP200UV - Heat pump indirect unvented water cylinder, HP240UV - Heat pump indirect unvented water cylinder, HP290UV - Heat pump indirect unvented water cylinder.

Approval Holder:: Warmflow Engineering Co. Ltd

Company Name
Warmflow Engineering Co. Ltd
Address
Lissue Industrial Estate, Moira Road, Lisburn Northern Ireland
Phone
02892 62 1515
General Email
sales@warmflow.co.uk

View All Listings by this Company
Manufacturer:: Warmflow Engineering Co. Ltd

Company Name
Warmflow Engineering Co. Ltd
Address
Lissue Industrial Estate, Moira Road, Lisburn Northern Ireland
Phone
02892 62 1515
General Email
sales@warmflow.co.uk

View All Listings by this Company

WRAS Approval Number: #2212028

Range of automatic air venting valves incorporating epoxy coated, ductile iron bodies and plastic float. Maximum operating pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 2212028
Size:: DN25, DN50, DN80, DN100, DN150 & DN200
Marking:: AVK, DN and PN on body. AVK and other info on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/12/2027
Model:: S851 Series comprising of models: 85102541971000 85105041111000 85108041111000 85110041111000 85115041111000 85120041111000

Approval Holder:: AVK Valves Manufacturing Malaysia SDN BHD

Company Name
AVK Valves Manufacturing Malaysia SDN BHD
Address
Lot No. 1, Jalan SG Chadong 8 Batu 5½ Mile, Jalan Kapar 42100 Klang
Country
Selangor

View All Listings by this Company
Manufacturer:: AVK Valves Manufacturing Malaysia SDN BHD

Company Name
AVK Valves Manufacturing Malaysia SDN BHD
Address
Lot No. 1, Jalan SG Chadong 8 Batu 5½ Mile, Jalan Kapar 42100 Klang
Country
Selangor

View All Listings by this Company

WRAS Approval Number: #2301084

Range of air release valves with blue epoxy coated ductile iron bodies and EPDM seats. Maximum working pressure 16.0 bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 2301084
Size:: DN50, DN80, DN100, DN150, DN200, DN300 flanged.
Marking:: ACMO, DN, PN & MODEL ON METAL DATA PLATE ON BODY. DN & PN ON BODY
Installation Requirements:: R001 R120
Expiry date:: 31/01/2028
Model:: FIG195ARX

Approval Holder:: AC.MO S.r.l.

Company Name
AC.MO S.r.l.
Address
Via T. Da Modena, 28 Roncade
Postcode
31056
Country
Italy
General Email
info@acmospa.com

View All Listings by this Company

WRAS Approval Number: #2306022

Range of deck mounted, manual blending valves, incorporating a ceramic cartridge headworks with a single lever operating member. The product is supplied with a stainless-steel braided, PEX lined flexible connection hose assembly that incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a hose and handset. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 2000 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control.
WRAS Approval Number:: 2306022
Size:: Stainless steel braided, PEX lined flexible hose assembly with a ½” BSP captive nut end connections.
Marking:: VOLA on Operating member
Installation Requirements:: R001 R010 R040
Expiry date:: 30/06/2028
Model:: VOLA BK9 XX VOLA BK9A XX VOLA BK9B XX Finishes regarding stainless steel trim kits are available with different surface finishes. The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper Finishes regarding brass trim kits are available with different surface finishes. The surface finish is indicated by a suffix to the product name and denotes: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 59 = Brushed Natural Brass, 60 = Black, B61 = Brushed Black, 61 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Difference in models: BK9 = Mixer complete with adjustable bracket and water collection box BK9A = Mixer with bracket BK9B = Mixer Alone

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #2303700

Range of adjustable or pre-set T-type thermostatic blending valves with brushed chromium plated DZR brass bodies. Supplied with an olive and compression nut. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2303700
Size:: 15mm compression
Marking:: Caleffi logo, CR, model & flow arrow on body. Caleffi and product info on cap.
Installation Requirements:: R001 R120 R040
Expiry date:: 31/03/2028
Model:: 521331, 521332 & 521931.

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #2212911

Range of concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with isolation valves and wall mounted concealed diverter valves with plastic bodies. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2212911
Size:: 15mm spigot
Marking:: Valves - Aqualisa and product information on adhesive label. Isolation valves - DM logo, size & flow arrow on body. Diverter valves - AQUALISA and product info on body
Installation Requirements:: R001 R008 R040
Expiry date:: 31/12/2027
Model:: HQD1015 HQD1017 HQD1019

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #2212039

Range of wall mounted thermostatic blending valves (chrome plated brass), incorporating a quarter turn ceramic disc, half turn ceramic disc or ceramic cartridge headworks (see models). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button, with a variety of operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2212039
Size:: 3/4" BSP (M) X 1/2" BSP (M) offset unions. Models LB032, LB037, LB012 & LB042 ¾” BSP (M) x 15mm compression
Marking:: LEBAIN on body
Installation Requirements:: R001 R040
Expiry date:: 31/12/2027
Model:: Half turn ceramic disc models: B1077-1 LB001 LB002 LB003 LB004 LB005 B2077-1 LB006 LB007 LB008 LB009 LB010 B1077 LB021 LB022 LB023 LB024 LB025 B2077 LB026 LB027 LB028 LB029 LB030 B2080 LB031 LB032 LB033 LB034 LB035 B1080 LB036 LB037 LB038 LB039 LB040 B2085 LB051 LB052 LB053 LB054 LB055 B1085 LB056 LB057 LB058 LB059 LB060 B2081 LB061 LB062 LB063 LB064 LB065 B1081 LB066 LB067 LB068 LB069 LB070 Quarter turn ceramic disc models: B2082 LB011 LB012 LB013 LB014 LB015 B1082 LB016 LB017 LB018 LB019 LB020 B2083 LB041 LB042 LB043 LB044 LB045 B1083 LB046 LB047 LB048 LB049 LB050 B2001 LB171 LB172 LB173 LB174 LB175 B2065 LB156 LB157 LB158 LB159 LB160 B2029 LB196 LB197 LB198 LB199 LB200 B2036 LB211 LB212 LB213 LB214 LB215 Ceramic disc diverter cartridge models: B3001 LB166 LB167 LB168 LB169 LB170 B3065 LB161 LB162 LB163 LB164 LB165 B3029 LB201 LB202 LB203 LB204 LB205 B3036 LB206 LB207 LB208 LB209 LB210

Approval Holder:: WEILAIWOLAI SANITARY WARE TECHNOLOGY(GUANGDONG)CO.,LTD

Company Name
WEILAIWOLAI SANITARY WARE TECHNOLOGY(GUANGDONG)CO.,LTD
Address
Feixiang Road, Dongxi Airport Industrial Area, Zhishan Town, Heshan
Phone
18207501630
General Email
lebain@lebain.cn

View All Listings by this Company

WRAS Approval Number: #2212351

Range of wall mounted, concealed thermostatic blending valves or exposed bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button incorporate. An approved check valve cartridge is also supplied, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (NU-019 & NU-022 models. All other models 60°C only).

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2212351
Size:: ¾” x ½” BSP (M) offset union for exposed models & ¾” BSP (F) for concealed models.
Marking:: Models - NU-019, NU-020 & NU-021 Scudo on body Models - NU-022, NU-023, NU-024, NU-028, NU-029 & NU-030 Harrison Bathroom logo ( 2 Keys- Brand of Harrison Bathroom) on cover plate
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2027
Model:: NU-019, NU-020, NU-021, NU-022, NU-023, NU-024, NU-028, NU-029 & NU-030

Approval Holder:: Harrison Bathrooms Incorporating Scudo

Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

WRAS Approval Number: #2304340

Range of high pressure and low pressure thermostatic mixing valves. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Low pressure models incorporate a pump. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves marked with ‘LP’ have a maximum working pressure of 1.0 bar.

Non-metallic materials and components comply with BS6920 at 45°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2304340
Size:: 15mm
Marking:: Mira Showers on label on body.
Installation Requirements:: R001 R010 R040
Expiry date:: 30/04/2028
Model:: 1.1981.001 with MODULE: 1335332 HP, 1.1981.002 with MODULE: 1335333 HP, 1.1981.004 with MODULE: 1335345 LP, 1.1981.005 with MODULE: 1335346 LP, 1.1981.007 with MODULE: 1335332 HP, 1.1981.008 with MODULE: 1335333 HP, 1.1981.010 with MODULE: 1335345 LP, 1.1981.011 with MODULE: 1335346 LP, 1.1981.013 (MODULE: 1335332 only) HP, 1.1981.014 (MODULE: 1335333 only) HP, 1.1981.015 (MODULE: 1335345 only) LP, 1.1981.016 (MODULE: 1335346 only) LP.

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

WRAS Approval Number: #2305313

Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products can consist of quarter turn ceramic disc or detent headworks, two-way diverter cartridges and a thermostatic cartridges (see models). All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2305313
Size:: ¾” BSP (F)
Marking:: Xindong logo on faceplate
Installation Requirements:: R001 R010 R040
Expiry date:: 31/05/2028
Model:: Ceramic disc headwork, thermostatic cartridge & two-way diverter T46002A-D T46002D T46012A-D T46102D T46022A-D T46022D T46032A-D T46032D T46042A-D T46042D T46052D T46062D T46072D T46082D T46092D T46012D T46122D T46152D T46192D T46202D T46212D T46222D T46232D T46242D Thermostatic cartridge & two-way diverter T47002A-D T47002D T47012A-D T47012D T47022A-D T47022D T47032A-D T47032D T47042A-D T47042D T47052D T47062D T47072D T47082D T47092D T47122D T47152D T47192D T47202D T47212D T47222D T47232D T47242D Thermostatic cartridge & 1,2 or 3 detent headworks T47102 T47102A T47112 T47102D T47102D-A T47112D T46102 T46102A T46112

Approval Holder:: ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name
ZHEJIANG XINDONG SANITARY WARE CO.,LTD.
Address
XUANMEN INDUSTRIAL ZONE YUHUAN CHINA
Country
CHINA

View All Listings by this Company
Manufacturer:: ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name
ZHEJIANG XINDONG SANITARY WARE CO.,LTD.
Address
XUANMEN INDUSTRIAL ZONE YUHUAN CHINA
Country
CHINA

View All Listings by this Company

WRAS Approval Number: #2401700

Range of T-type thermostatic mixing valves (chrome plated DZR brass). The 521928 model incorporates stainless steel strainers in the inlets and approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure: 10.0 Bar. Temperature: 90°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2401700
Size:: See models.
Marking:: Caleffi logo, CR, H+C & MIX on body. Caleffi and product info on cap.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2029
Model:: 521906 – 1 1/4” BSP male threaded connections, 521928 - 28mm Compression (For use with copper pipe EN1057).

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #2207385

Range of piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:: 2120 Valves
Section Subtitle:: Float operated, piston type.
WRAS Approval Number:: 2207385
Note:: For use with floats complying with BS 2456, not supplied. All models, except 39573 are marked with BS1212/1.
Size:: ½”, ¾” or 1” BSP(M)
Marking:: TS, WRAS, date of manufacture MM/YY on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: 39573 1/2" PT1 Float Ball Valve HP 10 bar 19256 1/2" PT1 Float Ball Valve LP 8 bar 80562 3/4" PT1 Float Ball Valve HP 10 bar

Approval Holder:: Toolstation Ltd.

Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

WRAS Approval Number: #2212037

Wall mounted, flow control valve (either stainless steel or brass body various finishes) incorporating a quarter turn ceramic disc headwork with a single lever operating member. The compression fitting is for use with copper tube complying with BS EN 1057. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 2170 Valves
Section Subtitle:: Flow control, manually operated.
WRAS Approval Number:: 2212037
Marking:: VOLA on body.
Installation Requirements:: R001
Expiry date:: 31/12/2027
Model:: VOLA S10-XX Brass, VOLA S10-XX Stainless Steel. Model VOLA S10-XX Brass and VOLA S10-XX Stainless Steel are available with different surface finishes. Suffixes indicate the surface finish and denotes: For Brass model: 02 = Grey, 04 = Light Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Polished Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, 62 = Deep Black, 63 = Copper, 65 = Gold, 68 = Nickel. For Stainless Steel model: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold.

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #2207081

Latching solenoid valves with a plastic body and an EPDM diaphragm. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 2207081
Size:: ½” BSP (M) inlet/outlet.
Marking:: Stern, date of manufacture (WW/YY) on adhesive label on body. Stern Logo and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: Electroflo latching solenoid valve

Approval Holder:: Thomas Dudley Limited

Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

WRAS Approval Number: #2209067

Range of spherical valves with nickel plated brass bodies, chromium plated brass balls, PTFE seals, NBR and/or FKM ‘O’-rings. incorporates a stainless-steel strainer. Also incorporate a magnet. Maximum working pressure: See PN in brackets under model. Maximum operating temperature: Cold water use only.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 2209067
Size:: See model.
Marking:: TVL, PN, size & flow arrow on body
Installation Requirements:: R001
Expiry date:: 30/09/2027
Model:: s.190M series - ball valve ¾” - 2” BSP F/F with built-in filter and magnet: (PN30), (PN30), (PN20), (PN20), (PN20). s.190M series with handle - ball valve ¾” - 1” BSP F/F with built-in filter and magnet - T-handle: (PN30), (PN30). s.190 series - ball valve ½” - 2” BSP F/F with built-in filter: (PN30), (PN30), (PN30), (PN20), (PN20), (PN20). s.190 series with handle - ball valve ½” - 1” BSP F/F with built-in filter - T-Handle: (PN30), (PN30), (PN30).

Approval Holder:: BONOMI Industries srl

Company Name
BONOMI Industries srl
Address
Via Padana Superiore, 29 Mazzano (BS)
Postcode
25080
Country
Italy
Phone
+39 030 21 244 241
General Email
info@rubvalves.com

View All Listings by this Company
Manufacturer:: Tecnovielle S.p.A.

Company Name
Tecnovielle S.p.A.
Address
Via Caduti 2 25065 Lumezzane Pieve (BS) Italy
General Email
stever@primotek.co.uk

View All Listings by this Company
Manufacturer:: Tecnovielle S.p.A.

Company Name
Tecnovielle S.p.A.
Address
Via Caduti 2 25065 Lumezzane Pieve (BS) Italy
General Email
stever@primotek.co.uk

View All Listings by this Company

WRAS Approval Number: #2212711

Range of spherical valves with a single lever or ‘T’ handle operating member. The products have a DZR brass body and a chrome plated DZR brass ball, except for the models with the ‘-OT’ suffix, models have (nickel-plated brass bodies) and chrome plated brass ball. The products are supplied with various end connections (see model). Maximum working pressures: 15mm to 28mm = 40 Bar 35mm = 25 bar 42mm to 54mm = 16 bar (All models). 42 to 54mm = 10 Bar (4E05, 4E05-OT, 4E06 and 4E06-OT models) Maximum operating temperature 40.0°C

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 2212711
Note:: Press fit end connections are for use with copper pipe EN1254-7.
Size:: See model.
Marking:: BOSS (brand of BSS) on lever. Size (DN) on body. Size, pressure (PN) and technical information on ring on body.
Installation Requirements:: R001
Expiry date:: 31/12/2027
Model:: 37140xxx range - Press x Press with steel lever - ‘M’ profile ends: 37140109 - 15mm 986pb Boss Press BV WRAS DZR, 37140120 - 22mm 986pb Boss Press BV WRAS DZR, 37140131 - 28mm 986pb Boss Press BV WRAS DZR, 37140142 - 35mm 986pb Boss Press BV WRAS DZR, 37140153 - 42mm 986pb Boss Press BV WRAS DZR, 37140164 - 54mm 986pb Boss Press BV WRAS DZR, 37140175 - 15mm 986pr Boss Press BV WRAS DZR, 37140186 - 22mm 986pr Boss Press BV WRAS DZR, 37140197 - 28mm 986pr Boss Press BV WRAS DZR, 37140205 - 35mm 986pr Boss Press BV WRAS DZR, 37140216 - 42mm 986pr Boss Press BV WRAS DZR, 37140227 - 54mm 986pr Boss Press BV WRAS DZR.

Approval Holder:: BSS Industrial

Company Name
BSS Industrial
Address
Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

WRAS Approval Number: #2306035

Range of lever operated spherical valves with stainless steel bodies and ball with PTFE seats. Maximum operating pressure 16.0 bar (2019S) or 63.0 bar (2013ND & 2006SC-FW).

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 2306035
Size:: DN15 up to DN250 flanged inlet and outlet (model 2019S), DN8 (1/4”) up to DN100 (4”) BSP female inlet and outlet (model 2013ND) & DN8 (1/4”) up to DN100 (4”) BSP female inlet and outlet (model 2006SC-FW).
Marking:: Haitima logo, Size, PN, CE and other information on body.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: 2019S, 2013ND, 2006SC-FW.

Approval Holder:: HAITIMA CORPORATION CHINA

Company Name
HAITIMA CORPORATION CHINA
Address
NANLANG IND PARK, NANLANG TOWN, ZHONGSHAN, GUANGDONG, CHINA

View All Listings by this Company

WRAS Approval Number: #2204099

Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 2204099
Size:: SEE MODELS
Marking:: Models - 111355, 111380, 111405 111406, 111430 & 111469 Plumb Right & WRAS on operating member. CPS, size, date of manufacture MM/YY and size on body. Models - 111719, 111826, 111827, 128743, 128747 & 128755 WRAS on operating member. CPS, DN, PN & Size on body. Models - 909978, 909990 & 991613 on/ off & Size on operating member. CPS, Size & date of manufacture MM/YY on body.
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: Red handle circlip reduced bore ball valve models: 909978 15MM 909990 22MM 991613 28MM Red handle circlip full bore ball valve models: 11135515MM 111380 22MM 111405 28MM Blue handle circlip full bore ball valve models: 111406 15MM 111430 22MM 111469 28MM Red butterfly handle circlip full bore ball valve models: 111719 15MM 111826 22MM 111827 28MM Blue butterfly handle circlip full bore ball valve models: 128743 15MM 128747 22MM 128755 28MM

Approval Holder:: The Highbourne Group, City Plumbing Supplies

Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

WRAS Approval Number: #2212349

Range of gate valves with a non-rising spindle with a handwheel operating member or lockshield connection. All models have brass body and brass wedge. For use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 2212349
Size:: see models
Marking:: CPS, SIZE, date of manufacturer MM/YY on body.
Installation Requirements:: R001
Expiry date:: 31/12/2027
Model:: 845190 - 15MM Gate Valve CXC LP 845192 - 22MM Gate Valve CXC LP 501832 - 28MM Gate Valve CXC LP 961694 - 15MM Gate Valve CXC LS 961695 - 22MM Gate Valve CXC LS 856538 - 28MM Gate Valve CXC LS 833111 - 22MM Pump valve-gate type 833112 - 28MM Pump valve-gate type

Approval Holder:: The Highbourne Group, City Plumbing Supplies

Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

WRAS Approval Number: #2210377

Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 2210377
Size:: 15, 20, 22, & 28 mm compression
Marking:: Flomasta, date of manufacture (MM/YY), EN1213, WRAS, size and flow arrow stamped on body.
Installation Requirements:: R001
Expiry date:: 31/10/2027
Model:: 03890141 15MM BRASS STOPCOCK CXC 05342150 22MM BRASS STOPCOCK CXC 05317110 28MM BRASS STOPCOCK CXC 05271979 15MM X 20MM BRASS STOPCOCK CXC 5063022070029 20MM X 20MM BRASS STOPCOCK CXC

Approval Holder:: Kingfisher International Products Ltd

Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

WRAS Approval Number: #2307501

‘ET Ordinary Portland Cement’. Factory applied, grey coloured cement. Mix and apply as per manufacturer’s ‘Standard Operating Procedure 'ET-SAM/DIP-PP/SOP/013', 'Rev. No 01', dated '15.12.2019'. Cure for 40 days@26°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2307501
Expiry date:: 31/07/2028

Approval Holder:: Electrotherm India Limited

Company Name
Electrotherm India Limited
Address
Survey No. 325 Near Toll Tax Booth National, Highway No-8, Samakhiyali, Kutch, GJ 370140
Country
India

View All Listings by this Company

WRAS Approval Number: #2307502

‘ET Sulphate Resisting Cement’. Factory applied, grey coloured cement. Mix and apply as per manufacturer’s ‘Standard Operating Procedure 'ET-SAM/DIP-PP/SOP/014', 'Rev. No 01', dated '15.12.2019'. Cure for 40 days@26°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2307502
Expiry date:: 31/07/2028

Approval Holder:: Electrotherm India Limited

Company Name
Electrotherm India Limited
Address
Survey No. 325 Near Toll Tax Booth National, Highway No-8, Samakhiyali, Kutch, GJ 370140
Country
India

View All Listings by this Company

WRAS Approval Number: #2307503

‘ET Blast Furnace Slag Cement’. Factory applied, grey coloured cement. Mix and apply as per manufacturer’s ‘Standard Operating Procedure 'ET-SAM/DIP-PP/SOP/012', 'Rev. No 01', dated '15.12.2019'. Cure for 40 days@26°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2307503
Expiry date:: 31/07/2028

Approval Holder:: Electrotherm India Limited

Company Name
Electrotherm India Limited
Address
Survey No. 325 Near Toll Tax Booth National, Highway No-8, Samakhiyali, Kutch, GJ 370140
Country
India

View All Listings by this Company

WRAS Approval Number: #2306531

‘Promag’. Factory applied, black coloured PUR coating system comprising of a primer and topcoat. ‘Promag Primer’ is a two-part primer to be mixed in a 1:2 mass ratio before applying as per manufacturer’s core instructions ‘TLB: 10000043811’, ‘Version: M’. Cure/dry for 2 hours@23°C. ‘Promag Topcoat’ is a three-part topcoat to be mixed in a 92.59:5.19:2.22 mass ratio before applying as per manufacturer’s core instructions ‘TLB: 10000043811’, ‘Version: M’. Cure/dry for 20 seconds@20-26°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2306531
Expiry date:: 30/06/2028

Approval Holder:: Endress + Hauser Flowtec AG

Company Name
Endress + Hauser Flowtec AG
Address
Christoph Merian-Ring 4 Reinach
Postcode
CH-4153
Country
Switzerland
Phone
Tel: +41 61715 6752 Fax: +41 61711 0626
General Email
info.ch@endress.com

View All Listings by this Company

WRAS Approval Number: #2309506

'571983 & 571984'. White coloured (semi-translucent), extruded PTFE tape. For use with water up to 85°C.

Section:: 5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:: Components.
WRAS Approval Number:: 2309506
Expiry date:: 30/09/2028

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2306527

'ESTANE® 58197 Nat 022'. In August 2023 'ESTANE® 58197 NAT 01' was added to the approval. Natural (transparent, colourless), injection moulded thermoplastic polyurethane materials. For use with water up to 85°C.

Section:: 5297 Polyurethane
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2306527
Expiry date:: 30/06/2028

Approval Holder:: Lubrizol Advanced Materials Europe

Company Name
Lubrizol Advanced Materials Europe
Address
Nijverheidsstraat 30, 2260 Oevel (Westerlo)
Country
Belgium
Phone
+32 1424 1611 Fax: +32 1421 6681

View All Listings by this Company

WRAS Approval Number: #2305507

'Titan A202'. Site applied, pale yellow coloured hydrophilic polyurethane foam. Apply as per manufacturer's Tech Sheet '03', dated '10.01.2023' and spray treated surface with water. Cure for 6 hours at an ambient temperature (19-21°C). For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5308 Repair Material
Expiry date:: 31/05/2028

Approval Holder:: Metalyte Pipeworks (IMG Ltd).

Company Name
Metalyte Pipeworks (IMG Ltd).
Address
The Industrial Maintenance Group Ltd. Unit M, Riverside Industrial Estate, Fazeley, Tamworth
Postcode
B78 3RW

View All Listings by this Company

WRAS Approval Number: #2303529

'FKM 90 Black 6019020105-CMP00700'. Black coloured, compression moulded FKM material. Shore hardness 90. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:: 5370 Rubbers
Section Subtitle:: Fluoroelastomers - components.
WRAS Approval Number:: 2303529
Expiry date:: 31/03/2028

Approval Holder:: NDS-Seals BV (a Sealution company)

Company Name
NDS-Seals BV (a Sealution company)
Address
Edvard Munchweg 61, 1328MK Almere
Country
Netherlands

View All Listings by this Company