Range of circulating pumps, with plastic or stainless steel (cast EN 1.4308) bodies and a plastic impeller. Maximum working pressures: Stainless steel bodied pumps 10.0 bar, Plastic bodied pumps 3.0 bar. Maximum operating temperature 95°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 26.866.xxx | Various | 1/2" BSP (M) | Open outlet bar | 65 °C | Grohe | Body | No | Flow Regulator Fitted, Handset, |
Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite GL0 – cool sunrise EN0 – brushed nickel DL0 – brushed warm sunset GN0 – brushed cool sunrise A00 – hard graphite MS0 – satin steel MG0 – satin graphite BE0- polished nickel
Range of shower handsets and shower heads with (plastic bodies - various finishes) Some models incorporate a plastic flow restrictor, or a check valve with built in flow regulator (however, the complete product has not been fully tested to demonstrate it provides backflow protection) or neither (See models for FR or WSCV). Maximum operating temperature 60.0°C Open outlet use only
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Gaia 200 Overhead - 1589805 | White/Chrome | 15mm | Open Outlet bar | 50 °C | Kohler Mira Limited | "Kohler Mira Limited" on top of overheads | No | No | Not Applicable | Not Applicable | |
| Gaia 200 Overhead - 1621057 | Black/White | 15mm | Open Outlet bar | 50 °C | Kohler Mira Limited | "Kohler Mira Limited" on top of overheads | No | No | Not Applicable | Not Applicable | |
| 100 FOKUS HANDSET - 1555570 | CHROME | 15mm | Open Outlet bar | 50 °C | Mira Showers | “Mira Showers” logo on front lower handset | No | No | Not Applicable | Not Applicable | Handset, |
| 100 FOKUS HANDSET - 1555588 | BLACK | 15mm | Open Outlet bar | 50 °C | Mira Showers | “Mira Showers” logo on front lower handset | No | No | Not Applicable | Not Applicable | Handset, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AOOSCPUK | Chrome | 1/2" BSP (F) | 0 bar | 60 °C | Methven | on shower handset. | No | Handset, | |||
| AOOSBKUK | Black | 1/2" BSP (F) | 0 bar | 60 °C | Methven | on shower handset. | No | Handset, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1001450AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, | |||
| 1001447AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, | |||
| 1001445AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, |
Fixed Head in 4 different colours - Chrome, Matt Black, Brushed Brass and Gunmetal Grey AQ = Aqualisa XX = AA , AD , AJ , AH AQAA - Chrome AQAD - Matt Black AQAJ - Gunmetal Grey AQAH - Brushed Brass
Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 293LK | None | 1/2" BSP (M) | 16 bar | 85 °C | Company logo, size and BS1010-2 | Body | Yes | Rising spindle | Not Applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61408 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61108 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 51508AQ | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum operating pressure 10.0 bar. Maximum operating temperature 90°C.
Range of “Tempest” Indirect and direct unvented storage cylinders consisting of factory fitted single or twin coil circuit with either a primary or solar coil. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar@90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures: Secondary circuit 3.0 bar, Primary Circuit 5.5 bar & Solar circuit 5.5 bar. Maximum operating temperature 70°C.
Range of 2, 3 or 4 way manifolds with brass bodies and stop valves at each of the outlets. Maximum operating pressure 10 bar. Maximum operating temperature 85°C
Range of wall mounted, concealed, manually operated blending valves, (brass bodies - various finish trim kits), incorporating ceramic cartridge headworks with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, manually operated, blending valve (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The inlets incorporate NBR washers with stainless steel mesh strainers. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C.
Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRM SHCDIV C | CHROME | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| FRM SHCDIV BLK | BLACK | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| FRM SHCDIV GM | GUN METAL | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| FRM SHCDIV BB | BRUSHED BRASS | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable |
Model added February 2026: RP3 SAI SHCDIV C
Range of wafer or lugged (see models) butterfly valves incorporating blue epoxy coated ductile iron bodies and discs, with Maximum working pressure: 16 Bar. Maximum operating temperature: 100 °C.
Range of piston type float operated inlet valves with bronze bodies. The valves discharge from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure 10.0 Bar Cold water use only
Range of piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure: size for 1/2”- 3/4” 10 bar, size for 1”- 2” 8 bar, size for 2-1/2”- 4” 6 bar. Cold water use only.
Range of wall mounted concealed flow control valves (brass body with various finishes) incorporating, quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C.
Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Adjustable, in-line pressure reducing valves with DZR brass bodies. Adjustable between 3.0 bar and 5.0 bar outlet pressure. Compression connections for use with copper pipe to EN1057. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line adjustable pressure reducing valves, with nickel plated DZR brass bodies and stainless-steel strainer. Various models are supplied with a pressure gauge (see model). Compression models are for use with BS EN1057 copper pipe. Maximum working pressure 16.0 Bar. Outlet pressure range: 0.8-6.0 bar. Maximum operating temperature 80°C.
Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Range of latching solenoid valves with DZR brass bodies, EPDM diaphragms and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of spherical valves with brass bodies incorporating a chrome plated brass ball and a lockable operating mechanism. Maximum working pressure; 16 Bar Maximum operating temperature; 23°c
‘AQU Valves – LV16’ range of gate valves with DZR brass bodies and gate. The products incorporate a lockshield operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C
Range of resilient seated gate valves with blue epoxy coated ductile iron body and an EPDM coated ductile iron wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.
Range of globe stop valves with a bronze bodies, brass stems and stem ring. The valves are operated via a rising spindle with a hand wheel operating member. Maximum working pressure 20 bar. Maximum operating temperature 85°C
Range of screw down stop valves with brass or DZR brass bodies. Valves incorporate EPDM seat washers and PTFE seals. Maximum working pressure: 16 bar. Maximum operating temperature: 95°C
Range of electronically controlled ion exchange water softeners (salt regenerated) for commercial and domestic use. Maximum working pressure 5.0 bar. Cold water use.
'KH24AC'. Black coloured, compression moulded, phenolic resin impregnated carbon/graphite disc component. For use with water up to 85°C.
'Shalipoxy 400'. Factory applied, two-part beige coloured epoxy coating. Mix component A & B in a 3:1 volume ratio and apply as per manufacturer’s Application Methodology ‘R&D/AIN 004/2013’, dated ’01.05.2013’. Cure for 7 days@27°C. For use with water up to 23°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ShaliPoxy 400 FG'. Factory applied, white coloured, two-component epoxy coating. Mix components A & B in a volume ratio of 3:1 and apply as per manufacturer’s TDS ‘0982019’. Cure for 7 days@27°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PROTEGOL UR Coating 32-45'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 3:1 volume ratio and apply as per manufacturer's Application Instructions dated '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PROTEGOL UR Coating 32-69 MB'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 1:1 volume ratio and apply as per manufacturer's Application Instructions '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'SF2400/2800'. Green coloured, nitrile rubber/aramid material manufactured by calendering. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.
Grivory GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225. Injection moulded, natural (appears white) or black coloured, glass reinforced nylon materials. For use with water up to 23°C.
'BADATRON PPS GF40 WL BLACK'. Black coloured, injection moulded, glass fibre reinforced PPS material. For use with water up to 85°C.
'DURAFIDE® PPS 1140A1 WN9050'. Black coloured, injection moulded PPS material. For use with water up to 85°C.
'Cosmoplast 4-Layer, PPR-FG-PPR-UV Resistance Pipes' and 'Cosmoplast PPR-FG-PPR FASER Pipes’. Extruded, multi-layered PPR pipes. 'Cosmoplast 4-Layer, PPR-FG-PPR-UV Resistance Pipe' comprises of a green coloured inner layer, transparent second layer, green coloured third layer and black coloured outer layer. 'Cosmoplast PPR-FG-PPR FASER Pipe’ comprises of a green coloured inner layer, transparent second layer, and green coloured outer layer. For use with water up to 85°C.
‘RSG-TW-BWGL, RSG-TW-V-BWGL & RSG-TW-K-BWGL’. Black coloured, compression moulded EPDM sheet materials. Shore hardness 70. Tested in-radius size 1.15mm. For use with water up to 85°C.
'03154-70'. Black coloured, compression moulded NBR material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.
'SQ-30T-W, SQ-40T-W, SQ-50T-W, SQ-60T-W, SQ-70T-W, SQ-80T-W, & SQ-90T-W (transparent, unpigmented)'. ‘SQ-30R-W, SQ-40R-W, SQ-50R-W, SQ-60R-W, SQ-70R-W, SQ-80R-W, & SQ-90R-W (red coloured)'. ‘SQ-30B-W, SQ-40B-W, SQ-50B-W, SQ-60B-W, SQ-70B-W, SQ-80B-W, & SQ-90B (blue coloured)'. Range of compression moulded, silicone rubber materials. Shore hardness between 30 & 90. Tested in-radius size 0.9mm. For use with water up to 85°C:
'Weld-On 724 UL VOC CPVC Cement Orange'. Orange coloured solvent cement. Apply as per manufacturer's TDS '724-05-2024'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Range of smart Bidet assemblies with sensor actuated solenoid valves and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 Bar Maximum operating temperature Cold water use only
Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (verified by test -suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.
'PVC Tube Settler Media FS42.50'. Black coloured, extruded PVC 'tube settler' component. For use with water up to 30°C.
Page 130 of 131
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
