Non-verifiable single check valve assembly with a stainless-steel body. Maximum working pressure 10.0 bar. Maximum operating temperature of 85°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

251004712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” (F) to ½” (M).

Marking:

Water2 logo, flow arrow, 304 & G½” on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

W2OWV-A

Approval Holder:

Gelcard Limited Trading As Water2

Company Name

Gelcard Limited Trading As Water2

Address

Flat 134 Queens Wharf, 2 Crisp Road, London, England

Postcode

W6 9PF

Country

United Kingdom

View All Listings by this Company

Range of tundishes incorporating a plastic or coated, mild steel body. Maximum operating temperature 85°C.

Section:

0046 Backflow Prevention Devices

Section Subtitle:

Tundish(s) air break to drain.

WRAS Approval Number:

2311336

Size:

See model

Marking:

Altecnic and product info on body. Some models are also marked with the date of manufacture. The code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

128-2001 CST 1F x 1 ¼”F Straight Tundish. 128-2003 CST 1 ½”F x 2”F Straight Tundish. 128-2004 CST 2”F x 2 ½”F Straight Tundish. 128-2005 CST 2 ½”F x 3”F Straight Tundish. 128-4001 CST 15mm x 22mm Straight Tundish. 128-4002 CST 15mm x 22mm Straight Tundish. 128-4003 CST 15mm x 22mm Straight Tundish. 128-4004 CST 22mm x 28mm Straight Tundish. AL-400010 15mm x 22mm Straight Tundish. AP-400010 15mm x 22mm Straight Tundish. AP-400012 15mm x 22mm Straight Tundish. G-128-2201 CST ½” M x ¾” M Angled Tundish. G-128-2010 CST 15mm x 22mm Straight Dry Trap Tundish. Model added May 2024: AP-400011 22mm x 28mm Straight Tundish. Model added September 2024: 128-2002CST 1 ¼” BSP(F) x 1 ½”BSP(F).

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:

0060 Boilers

Section Subtitle:

Catering, Feed Cistern or Pressure.

WRAS Approval Number:

2304064

Size:

Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.

Marking:

GETTAI (trademark of Foshan Shunde Gettai Sanitary Products Co.,Ltd ) and product info on adhesive label on body.

Installation Requirements:

R001 R009 R170 R040

Expiry date:

30/04/2028

Model:

GTBL2 GTBL4

Approval Holder:

Foshan Shunde Gettai Sanitary Products Co., Ltd

Company Name

Foshan Shunde Gettai Sanitary Products Co., Ltd

Address

No 12 Huatian Road Huakou, Ronggui Shunde, Foshan City

Country

China

View All Listings by this Company

Manufacturer:

Foshan Shunde Gettai Sanitary Products Co., Ltd

Company Name

Foshan Shunde Gettai Sanitary Products Co., Ltd

Address

No 12 Huatian Road Huakou, Ronggui Shunde, Foshan City

Country

China

View All Listings by this Company

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:

0060 Boilers

Section Subtitle:

Catering, Feed Cistern or Pressure.

WRAS Approval Number:

2304107

Size:

Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.

Marking:

Caple and product info on adhesive label on body. Caple on cover plate

Installation Requirements:

R001 R009 R170 R040

Expiry date:

30/04/2028

Model:

BOILER2

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:

0060 Boilers

Section Subtitle:

Catering, Feed Cistern or Pressure.

WRAS Approval Number:

2304108

Size:

Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.

Marking:

CAPLE (Brand of Maurice Lay Distributors Ltd) , WRAS and product info on adhesive label on body.

Installation Requirements:

R001 R009 R170 R040

Expiry date:

30/04/2028

Model:

BOILER3

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:

0060 Boilers

Section Subtitle:

Catering, Feed Cistern or Pressure.

WRAS Approval Number:

2304110

Size:

Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.

Marking:

ABI INTERIORS LOGO on front cover, Model number & product info on adhesive label on body

Installation Requirements:

R001 R009 R170 R040

Expiry date:

30/04/2028

Model:

17450

Approval Holder:

ABI Interiors International LTD

Company Name

ABI Interiors International LTD

Address

10 John Street London

Postcode

WC1N 2EB

Country

United Kingdom

Phone

02045 389222

General Email

robert.b@abiinteriors.com

View All Listings by this Company

Single hole, bidet combination tap assembly (stainless steel body -various finishes) incorporating a fixed spout with swivel nozzle. The products incorporate a ceramic cartridge headwork with single lever operating member and the spout outlets a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

251108012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PA braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

BDM-STU-310-XX. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Two-hole, single outlet combination tap assembly with stainless steel body incorporating a ceramic cartridge headworks with lever operating members and a pull-out handset.. The spout inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates plastic aerator Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2205314

Size:

Stainless-steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Comfortel on body of hand shower.

Installation Requirements:

R001 R007 R009 R090

Expiry date:

31/05/2027

Model:

10513

Approval Holder:

Comfortel

Company Name

Comfortel

Address

10/126-134 Fairbank Road Clayton South VIC 3109

Country

Australia

Phone

+61 3 8581 8111

View All Listings by this Company

Manufacturer:

Huate Sanitary Ware Co., Ltd.

Company Name

Huate Sanitary Ware Co., Ltd.

Address

B, Dongxi Industrial Zone Zhishan Town Heshan City Guangdong Province

Country

China

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly with a brushed stainless-steel body, incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2107030

Size:

Stainless steel braided silicone lined flexible hose assemblies incorporating ⅜" captive nut end connections.

Marking:

Treemme on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2026

Model:

5MM (IT2811IS5MZZ).

Approval Holder:

Rubinetterie 3M S.r.l.

Company Name

Rubinetterie 3M S.r.l.

Address

Via Enrico Mattei 30 53041 Asciano (SI)

Country

Italy

General Email

riccardo.michelangelo@rubinetterie3m.it

View All Listings by this Company

Manufacturer:

Rubinetterie 3M S.r.l.

Company Name

Rubinetterie 3M S.r.l.

Address

Via Enrico Mattei 30 53041 Asciano (SI)

Country

Italy

General Email

riccardo.michelangelo@rubinetterie3m.it

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass or stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The HV3 model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 65 °C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2109706

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 10mm spigot end connections.

Marking:

VOLA on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2026

Model:

VOLA HV1 & VOLA HV3 - Stainless Steel body. Where XX denotes surface finish Brass body models available in: 02 = Grey, 04 = Light Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Polished chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Stainless Steel body models available in: 40 = Brushed Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold. 71 = Brushed Dark Copper.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes). Model WJ IX008A has a stainless-steel body. Incorporating a ceramic cartridge headworks with single lever operating members. Models WJ 6181000XX & WJ 6181700XX have dome type operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

241102036

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Zhong Rui Yi Sheng on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2029

Model:

WJ 6181700XX WJ LH6181700XX WJ 6181000XX WJ LH6181000XX WJ 8521000XX WJ DH8521000XX WJ 8521700XX WJ DH8521700XX WJ IX008A (Stainless Steel Only) WJ 15001 (Chrome Only) WJ 79001 (Chrome Only) WJ 86001 (Chrome Only) WJ 32001 CH WJ 37001BBL WJ 33001BBR WJ 38001MB WJ FORM001 (Chrome Only) WJ KIO001 (Chrome Only) WJ B01 (Chrome Only) WJ 85001ZZ Where XX, YY and ZZ denotes the finishes and can be replaced with any of the following: CH = Chrome (XX, YY & ZZ suffixes) BBL – Brushed Black (XX & YY suffixes) BBR = Brushed Brass (XX, YY & ZZ suffixes) MB = Matt Black (XX & YY suffixes) BRZ = Brushed Bronze (XX Only suffixes) NK = Nickel (ZZ Only Suffixes) G = Antique Brass (ZZ Only Suffixes)

Manufacturer:

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Range of single hole, metal, single outlet (swivel) also with end swivel spout, combination tap assembly (brass or stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2109703

Size:

Stainless steel braided PEX lined flexible hose assemblies with 12mm spigot end connections.

Marking:

VOLA on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2026

Model:

VOLA KV8-XX (std. lever), VOLA KV8M-XX (medium lever) & VOLA KV8L-XX (long lever). Where XX denotes surface finish Brass body models available in: 02 = Grey, 04 = Light Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Polished chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Stainless Steel body models available in: 40 = Brushed Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of single hole, metal, single outlet (swivel) also with end swivel spout, combination tap assembly (brass or stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2109704

Size:

Stainless steel braided PEX lined flexible hose assemblies with 10mm spigot end connections.

Marking:

VOLA on Operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2026

Model:

VOLA KV1-XX (std. lever), VOLA KV1M-XX (medium lever) & VOLA KV1L-XX (long lever). Where XX denotes surface finish Brass body models available in: 02 = Grey, 04 = Light Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Polished chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Stainless Steel body models available in: 40 = Brushed Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (stainless steel body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator with an integral flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2110365

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

QTOO (brand of D Line) on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2026

Model:

QT1200xxx Tall single hole mixer. Model added June 2022 QT2100xxx Where xxx denotes the finish and can be replaced by 1 to 3 digits: M = brushed stainless steel finish. PP1 = polished PVD gunmetal finish.

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (stainless steel body), incorporating quarter turn ceramic disk headworks. The spout outlet incorporates a plastic aerator Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2112319

Size:

Stainless steel braided EPDM lined flexible hoses with ½” BSP captive nut end connections.

Marking:

Abode on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2026

Model:

Focal Monobloc

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road Barnsley

Postcode

S75 1HT

Country

United Kingdom

Phone

01226 283434

General Email

info@abode.eu

View All Listings by this Company

Manufacturer:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road Barnsley

Postcode

S75 1HT

Country

United Kingdom

Phone

01226 283434

General Email

info@abode.eu

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (stainless steel body) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2307318

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Franke on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

115.0547.856 - Atlas neo swivel kitchen tap.

Approval Holder:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Country

United Kingdom

Phone

0161 4360280

View All Listings by this Company

Manufacturer:

Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.

Company Name

Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.

Address

38 South Shunde Avenue Ronggui Foshan Guangdong 528305

Country

China

View All Listings by this Company

Single-hole, single outlet (swivel) combination tap assembly, (stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2311329

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Dornbracht on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2028

Model:

33900210-xx PIUR Swivel spout kitchen tap Available in 3 different finishes: chrome-plated (suffix 00), black matte (suffix 69), Brushed nickel matt (suffix 70)

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Ramge of deck mounted, two-hole, single outlet (fixed) combination tap assemblies (stainless steel body – various finishes) incorporating a ceramic cartridge headwork with single lever operating members. The products are supplied with nylon braided, PEX lined flexible interconnecting hoses and the spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251108011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PA braided PE lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R006 R007 R009 R010

Expiry date:

30/11/2030

Model:

BDM-STU-304-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of floor mounted, two-hole, single outlet (swivel) combination tap assemblies (stainless steel and brass bodies various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2111002

Size:

½” BSP (F)

Marking:

VOLA on Operating Member

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2026

Model:

VOLA FS2 - Stainless Steel body. Finishes regarding Stainless Steel are available with different surface finishes. The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA FS2 - Brass body. Finishes regarding Brass are available with different surface finishes. The surface finish is indicated by a suffix to the product name and denotes: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 59 = Brushed Natural Brass, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Two hole, double outlet swivel combination tap assembly ( stainless steel body) incorporating ceramic cartridge headworks with lever type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. The spout incorporates a mixed hot water outlet and separate outlet intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

2210303

Note:

This approval covers the tap and inlet hoses only. Additional components are required to dispense near boiling water.

Size:

Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP (F) captive nut end connections.

Marking:

Gettai on spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2027

Model:

GT6616

Approval Holder:

Foshan Shunde Gettai Sanitary Products Co., Ltd

Company Name

Foshan Shunde Gettai Sanitary Products Co., Ltd

Address

No 12 Huatian Road Huakou, Ronggui Shunde, Foshan City

Country

China

View All Listings by this Company

Manufacturer:

Foshan Shunde Gettai Sanitary Products Co., Ltd

Company Name

Foshan Shunde Gettai Sanitary Products Co., Ltd

Address

No 12 Huatian Road Huakou, Ronggui Shunde, Foshan City

Country

China

View All Listings by this Company

Two hole, double outlet swivel combination tap assembly ( stainless steel body) incorporating ceramic cartridge headworks with lever type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. The spout incorporates a mixed hot water outlet and separate outlet intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

2210362

Note:

This approval covers the tap and inlet hoses only. Additional components are required to dispense near boiling water.

Size:

Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP (F) captive nut end connections.

Marking:

Caple (Brand of Maurice Lay Distributors Ltd) on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2027

Model:

FOS/4IN1/SS, FOS/4IN1/BS, FOS/4IN1/GM, FOS/4IN1/CO, FOS/4IN1/GD

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Range of wall mounted spout outlets with either stainless steel or brass bodies (various finishes - see model), incorporating a plastic aerator and EPDM ‘O’-rings. Maximum working temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2203021

Size:

¾” BSP (M)

Marking:

Vola on top of spout.

Installation Requirements:

R001 R040

Expiry date:

31/03/2027

Model:

Stainless steel body models: VOLA 010-XX, VOLA 010C-XX, VOLA 020-XX, VOLA 020C-XX. Where XX denotes finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold. Brass body models: VOLA 010-XX, VOLA 010C-XX, VOLA 020-XX, VOLA 020C-XX. Where XX denotes finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of wall mounted spout outlets incorporating chrome plated brass bodies (model F2929.WR & F2418.WR) or a stainless-steel body (model F2944INOX.WR). The outlets incorporate a plastic flow straightener (model F2929.WR) or a plastic aerator (models F2418.WR & F2944INOX.WR) Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2206010

Size:

See model

Marking:

Fima on base plate

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

3/8" BSP (M) inlet models: F2944INOX.WR ½" BSP (M) inlet models: F2929.WR F2418.WR

Approval Holder:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Manufacturer:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Range of deck mounted spout outlets incorporating chrome plated brass body (model F2158.WR) or a stainless-steel body (model F2943INOX.WR). The outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2206011

Note:

R009 only applies to model F2943INOX.WR

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½" captive nut end connections (model F2158.WR) Stainless-steel braided TPSiV lined flexible hose assemblies incorporating ½” captive nut end connections (model F2943INOX.WR)

Marking:

Fima on base plate

Installation Requirements:

R001 R006 R009

Expiry date:

30/06/2027

Model:

F2158.WR F2943INOX.WR

Approval Holder:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Manufacturer:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Range of wall mounted spout outlets incorporating chrome plated brass bodies (models CPHSP2929, ZCPHSP2929, CPHMA2418 & ZCPHMA2418) or a stainless-steel body (models CPHSP2944SS & ZCPHSP2944SS). The outlets incorporate a plastic flow straightener (models CPHSP2929 & ZCPHSP2929) or a plastic aerator (models CPHMA2418, ZCPHMA2418, CPHSP2944SS & ZCPHSP2944SS) Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2206055

Size:

See model

Marking:

CP HART on base plate

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

3/8" BSP (M) inlet models: CPHSP2944SS & ZCPHSP2944SS ½" BSP (M) inlet models: CPHSP2929, ZCPHSP2929, CPHMA2418 & ZCPHMA2418

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Range of deck mounted spout outlets incorporating chrome plated brass body (models CPHSP2158 & ZCPHSP2158) or a stainless-steel body (models CPHSP2943SS & ZCPHSP2943SS). The outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2206056

Note:

R009 only applies to model F2943INOX.WR

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½" captive nut end connections (model F2158.WR) Stainless-steel braided TPSiV lined flexible hose assemblies incorporating ½” captive nut end connections (model F2943INOX.WR)

Marking:

CP HART on base plate

Installation Requirements:

R001 R006 R009

Expiry date:

30/06/2027

Model:

CPHSP2158, ZCPHSP2158, CPHSP2943SS & ZCPHSP2943SS SPOUT OUTLETS

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:

1000 Expansion Vessels

Size:

½” BSP (M)

Marking:

Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

WSA050 = 0.50 litre WSA100 = 1 litre WSA200 = 2 litres

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:

1000 Expansion Vessels

Size:

½” BSP (M)

Marking:

Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

XVES050005: 0.50L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050006: 1L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050007: 2L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Expansion vessel with stainless steel body and butyl membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C

Section:

1000 Expansion Vessels

Size:

15mm compression

Marking:

Trappex logo and Centrashock on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

Trappex Centrashock Trapshock12/DIA

Approval Holder:

Trappex Ltd.

Company Name

Trappex Ltd.

Address

59 Springwood Hall Gardens, Huddersfield

Postcode

HD1 4HA

Country

United Kingdom

General Email

info@trappex.co.uk

View All Listings by this Company

Range of mini shock arrestors with a stainless steel body. Models with compression connections are for use with copper tube (manufactured to EN 1057). Maximum working pressure 10.0 or 15.0 bar (please refer to model). Maximum operating temperature 70°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Altecnic, model and other information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Maximum working pressure 10.0 bar: PV05RS (0.5 litre capacity) & PV2RS (2 litre): 15mm compression. SSV05A (0.5 litre), SSV2A ACX 2 (2 litre) & SSV1C ACX 1 (1 litre): ½” BSP (M). SSV8C (8 litre): ¾” BSP (M). SSV18C (18 litre): 1” BSP (M). Maximum working pressure 15.0 bar, 0.16 litre capacity: PV016RS: 15mm compression. PV016D: ¼” BSP (M). PV016C, PV016EV ACX 0.16 EV, PC016C & PV016E: ½” BSP (M).

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Mini shock arrestor with a stainless steel body. Maximum working pressure 15.0 bar . Maximum operating temperature 70°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Flomasta and technical information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Maximum working pressure 15.0 bar, 0.16 litre capacity: VAH0368 - 5059340418568 – Flomasta ½”MBSP Mini Shock Arrestor

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Mini shock arrestors with a stainless steel body. Maximum working pressure 15.0 bar. Maximum operating temperature 70°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

ONYX, model and other information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Maximum working pressure 15.0 bar, 0.16 litre capacity: ONYXSA ½” BSP (M).

Approval Holder:

HRP Trade

Company Name

HRP Trade

Address

1 Lonebarn Link, Springfield, Chelmsford

Postcode

CM2 5AR

Country

United Kingdom

View All Listings by this Company

Shock arrestor with stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Strada and technical info on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

SPSA-01 Potable shock arrestor 0.16L

Approval Holder:

Strada Products Limited

Company Name

Strada Products Limited

Address

Unit A, 82 James Carter Road, Mildenhall Industrial Estate, Suffolk

Postcode

IP28 7DE

View All Listings by this Company

Expansion vessel with a stainless-steel body. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

MB (denotes midbrass, a brand of Navigator), date of manufacture (MM/YY) and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

HCSA-D Shock Arrestor

Approval Holder:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

General Email

sales@navigatormsl.com

View All Listings by this Company

TY-11 & TY-03 ranges of expansion vessels. The TY-11 range has an epoxy coated carbon steel body and the TY-03 range has a stainless-steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

TY11 range: 1” BSP (M). TY-03 range: ½” BSP (M).

Marking:

Manufacturer’s logo (DEZHI) , name and technical information on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

TY-11-0.5G, TY-11-1.5G, TY-11-2G, TY-11-3G, TY-11-4.5G, TY-11-6.3G, TY-11-9.3G, TY-11-11G & TY-11-22G. TY-03-0.16L, TY-03-0.5L, TY-03-1L & TY-03-2L. Model added June 2025: TY-14-22G.

Manufacturer:

Taizhou Tianyang Electrical Co., Ltd.

Company Name

Taizhou Tianyang Electrical Co., Ltd.

Address

Shangma Industrial Zone, Wenling City, Taizhou

Country

Zhejiang,

Phone

86?576?89956882

View All Listings by this Company

Expansion vessel with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾" BSP (M).

Marking:

Aquasystem logo (brand of Zilio Industries SpA) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

AR2

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Shock arrestor with stainless steel body and EPDM diaphragm. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

WPT03.

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang

Country

China

Phone

+86 0574 88001556

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Export Processing Zone, Beilun Bonded South Zone, Ningbo City, Zhejiang Province (No. 6 Zhufeng Road)

View All Listings by this Company

102606 Mini shock arrestors with a stainless steel body. Maximum working pressure 15.0 bar. Maximum operating temperature 70°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

City Plumbing logo, model and other information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

102606: ½” BSP (M). Maximum working pressure 15.0 bar, 0.16 litre capacity.

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Expansion vessel with a carbon steel body, polypropylene cover and a butyl membrane. Maximum working pressure: 10 Bar. Maximum operating temperature: 99°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Taizhou Tianyang Electrical Co Ltd, model, max pressure, max temp, product info on body

Installation Requirements:

R001 R530

Expiry date:

31/12/2030

Model:

TY-01-2L-P.

Approval Holder:

Taizhou Tianyang Electrical Co., Ltd.

Company Name

Taizhou Tianyang Electrical Co., Ltd.

Address

Shangma Industrial Zone, Wenling City, Taizhou

Country

Zhejiang,

Phone

86?576?89956882

View All Listings by this Company

Expansion vessels incorporating a stainless-steel body and SEFA membrane. Maximum working pressure: 10 bar, except A2C2R27 WR000 (DP 24/16X) 1” BSPP (M) which is 16 bar. Maximum operating temperature 85˚C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

ELBI, Model name, Serial, Production number, Nominal capacity, Max pressure and other technical information on lable on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

A2C2L11 WR000 (DP-5X) ¾” BSPP (M), A2C2L16 WR000 (DP-8X) ¾” BSPP (M), A2C2L19 WR000 (DP11X) ¾” BSPP (M), A2C2L24 WR000 (DP-18X) ¾” BSPP (M), A2C2L27 WR000 (DP-24X) 1” BSPP (M), A2C2L31 WR000 (DP-35X) 1” BSPP (M). A2C2L34 WR000 (DP-50X) 1” BSPP (M), A2C2L35 WR000 (DPV-60X) 1” BSPP (M), A2C2L37 WR000 (DPV-80X) 1” BSPP (M), A2C2L38 WR000 (DPV-100X) 1 ¼”” BSPP (M), A2C2L43 WR000 (DPV-150X) 1 ¼”” BSPP (M), A2C2L47 WR000 (DPV-200X) 1 ¼”” BSPP (M), A2C2L51 WR000 (DPV-300X) 1 ¼”” BSPP (M), A2C2L55 WR000 (DPV-500X) 1” BSPP (M). A2E2L25 WR000 (DPH-20X) 1” BSPP (M), A2E2L27 WR000 (DPH 24X) 1” BSPP (M), A2E2L35 WR000 (DPH 60X) 1” BSPP (M), A2F2L25 WR000 (DPH-20X G3/4”) 3/4” BSPP (M), A2F2L27 WR000 (DPH-24X G3/4”) 3/4” BSPP (M). A2C2R27 WR000 (DP 24/16X) 1” BSPP (M).

Approval Holder:

Elbi SPA

Company Name

Elbi SPA

Address

Via Buccia 9 35010 Limena PD Italy

View All Listings by this Company

AQUASYSTEM Expansion Vessels with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾" BSP (M).

Marking:

Aquasystem logo (brand of Zilio Industries SpA) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

XVES050010 2L AQUASYSTEM EXPANSION VESSEL WHITE PRE-SET 3.0 bar XVES050011 2L AQUASYSTEM EXPANSION VESSEL WHITE PRE-SET 3.5 bar XVES050012 2L AQUASYSTEM EXPANSION VESSEL WHITE PRE-SET 4.1 bar

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:

1000 Expansion Vessels

Size:

1/2" BSP (M)

Marking:

Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

XVES050005 - 0.50L XVES050006 - 1L XVES050007 - 2L

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of water filters comprising of a carbon block cartridge and head, for use with LLDPE tube (manufactured to DIN 8072). Model K2-S has a stainless steel body and head, all other models are plastic. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

251215706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 does not apply to the K2-S model.

Size:

⅜” or ¼” push-fit

Marking:

Hanhua on body or head.

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

31/12/2030

Model:

Q5-F, Q5, K2, K5, K2-S, Q5-S.

Approval Holder:

Foshan Hanhua Filter Co., Ltd.

Company Name

Foshan Hanhua Filter Co., Ltd.

Address

Room 801‐802, Suite 2, Chuanghe Building, No.3, Changbao Western Rd, Rongli Neighborhood Committee, Ronggui, Shunde District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Manufacturer:

Foshan Hanhua Filter Co., Ltd.

Company Name

Foshan Hanhua Filter Co., Ltd.

Address

Room 801‐802, Suite 2, Chuanghe Building, No.3, Changbao Western Rd, Rongli Neighborhood Committee, Ronggui, Shunde District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Single low-level horizontal mount float switch with stainless-steel body and float. Maximum operating temperature 100°C.

Section:

1300 Float Operated Electrical Switches

Size:

½” Male BSP

Marking:

APPENG.CO.UK, Applications Engineering logo . on body.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

RF-MH56CBS

Approval Holder:

Applications Engineering Ltd

Company Name

Applications Engineering Ltd

Address

Liberty House, Unit 9C Michael Way, Ashdown Business Park, Maresfield, Uckfield, East Sussex

Postcode

TN22 2DU, UK

View All Listings by this Company

Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Company logo (AO Smith), model and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

TWI 35-200 & TWI 45-200

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Lochinvar on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

LGSS 200-600 LGSS 200-780 WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of ultrasonic remote transmission water meters with stainless steel body. The products incorporate a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) & 1” BSP (M) Size added October & November 2024 ¾” BSP (M)

Marking:

Manufacturer’s logo, model, WRAS, flow arrow. Date of manufacture (MM/YY) and technical info on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

LXCY-15 & LXCY-25 Model added October 2024 LXCY-20 3/4" BSP (M) Model added November 2024: LXCY_20 : 3/4" BSP (M)

Approval Holder:

Sanchuan Wisdom Technology Co., Ltd.

Company Name

Sanchuan Wisdom Technology Co., Ltd.

Address

Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company

Manufacturer:

Sanchuan Wisdom Technology Co., Ltd.

Company Name

Sanchuan Wisdom Technology Co., Ltd.

Address

Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company

Range of ultrasonic water meters incorporating a stainless steel body, temperature sensor, pressure sensor and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Sanchuan Wisdom Technology Co., Ltd. logo on cover. Flow arrow and size on side cover. Model No., address, pressure, temperature, date of manufacture (MM/YY) and product information on meter face.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

U550-15K: (DN15) ½” BSP (M), U550-20K: (DN20) ¾” BSP (M), U550-25K: (DN25) 1” BSP (M).

Approval Holder:

Sanchuan Wisdom Technology Co., Ltd.

Company Name

Sanchuan Wisdom Technology Co., Ltd.

Address

Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company

Biofilm and water quality monitor incorporating a stainless-steel body and silicon seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2209020

Note:

The monitor has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and has not been checked for accuracy by the Scheme.

Size:

¾” female BSP inlet x ¾” male BSP outlet.

Marking:

Sol, Model and product information on adhesive label on side of casing.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

Solution MX1

Approval Holder:

Waterman Environmental Group

Company Name

Waterman Environmental Group

Address

SOLmicroTEK Ltd., Cotswold Business Centre, 2, AP Ellis Road, Upper Rissington, Gloucestershire

Postcode

GL54 2QB

View All Listings by this Company

Flow meter with stainless steel body. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1530 Miscellaneous Fittings

Size:

DN100 Flanged

Marking:

Pydro on body. Pydro, Model, Serial no, size and other technical information on data plate on body

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

PT-1 Multi Sensing Device

Approval Holder:

PYDRO GMBH

Company Name

PYDRO GMBH

Address

FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company

Manufacturer:

PYDRO GMBH

Company Name

PYDRO GMBH

Address

FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company

Leak detection system, comprising of a flow sensor with a stainless-steel body incorporating a motorised spherical valve, with a stainless-steel ball. Please note that claims of leak detection have not been verified by WRAS. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

250402049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Please note that claims of leak detection have not been verified by WRAS.

Size:

¾” BSP (M) inlet and outlet.

Marking:

HLP-4 on valve body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

9015-B.

Approval Holder:

Harrison Land & Property Ltd.

Company Name

Harrison Land & Property Ltd.

Address

11-12 Hallmark Trading Centre, Fourth Way, Wembley, Middlesex

Postcode

HA9 0LB.

Country

United Kingdom

View All Listings by this Company

Electronically controlled advanced flow control pilot valve assembly with stainless steel body. Maximum working pressure 16.0 Bar Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

M16 threaded connection (M)

Marking:

i20 Water Ltd and model code on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

AMPV0011

Manufacturer:

i20 Water Ltd

Company Name

i20 Water Ltd

Address

Unit 2, Vancouver Wharf, Hazel Road

Postcode

SO19 7BN

View All Listings by this Company

Range of flow restriction blocks with a stainless-steel body and integral stainless-steel filter. Maximum working pressure 16.0 Bar Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M

Marking:

i20 Water Ltd and model number on adhesive label on body

Installation Requirements:

R001 R150

Expiry date:

31/05/2030

Model:

AMRB0002 AMRB0004

Manufacturer:

i2O Water Ltd

Company Name

i2O Water Ltd

Address

4 Benham Road Southampton Science Park Southampton

Postcode

SO16 7QJ

Country

Hampshire

Phone

02380 111 420

View All Listings by this Company

Water shock absorber incorporating a stainless-steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Aquasystem logo (brand of Zilio Industries SpA), model code, date of manufacture (DD/MM/YYYY), pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

WSA016

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Mini expansion vessels/shock arrestor with a stainless-steel body and butyl rubber diaphragm. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

TRAPPEX on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

TRAPSHOCK12 (TRAPPEX CENTRASHOCK 2).

Approval Holder:

Trappex Ltd.

Company Name

Trappex Ltd.

Address

59 Springwood Hall Gardens, Huddersfield

Postcode

HD1 4HA

Country

United Kingdom

General Email

info@trappex.co.uk

View All Listings by this Company

Range of shock arrestors with a stainless-steel body and EPDM liner. The compression connection of the X2041.015 model is for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

X2041.015: 15mm compression, X2040.G15: ½” BSP (M).

Marking:

Zhejiang Fansheng Fluid Control Co., Ltd logo on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

X2041.015, X2040.G15.

Approval Holder:

Zhejiang Fansheng Fluid Control Co., Ltd.

Company Name

Zhejiang Fansheng Fluid Control Co., Ltd.

Postcode

317605

Country

China

Phone

+86 576 8746 0061

General Email

info@IVANCI.com

View All Listings by this Company

Water shock absorber incorporating a stainless-steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Aquasystem logo (brand of Zilio Industries SpA), model code, date of manufacture (DD/MM/YYYY), pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

XVES050000 0.16L (pre-set 5.0 bar) & XVES050001 0.16L (pre-set 1.5 bar) Potable water shock arrestor.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Self-closing hand spray with a stainless-steel body. The inlet incorporates a flow regulator and an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5 bar. Max operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241004710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M)

Marking:

T-Safe on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

02-803200 Kitchen Spray filter

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

‘e-SH’ range of centrifugal booster pumps with a blue polymer coated stainless steel body, stainless steel impeller and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110004

Size:

DN50-100 flanged inlets. DN25-80 flanged outlets.

Marking:

LOWARA (brand of Xylem), CE, maximum temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

e-SH range of pumps Example model code: ESHF 65-160/110A/P25VSNB ESH = Pump series F = Coupling type (blank - bare shaft, E - extended shaft, S - Stub shaft, F - Frame mounted or C - spacer coupling frame mounted). [ ] = motor operation (blank [ ] = standard asynchronous motor, [H] = equipped with Hydrovar, [X] = other drives). 65 = discharge port diameter mm (ranges from DN25-80). 160 = impeller diameter mm (ranges from 125-250). 110 = Motor power (2-3 digits - kW x 10 or D + actual impeller diameter (mm) (bare shaft version)). A = Trimmed impeller (blank - not trimmed, A - trimmed diameter that doesn’t maximise motor power type, X - trimmed diameter to meet customer required duty point). P = motor type (/P, /S, /W, /X). 2 = No. of poles (2 or 4). 5V = electrical voltage and frequency (5H, 5R, 5V, 5P, 5S, 5T, 5W, 6F, 6E, 6P, 6R, 6V, 6U, 6N, 6T). S = Casing material (Stainless steel 1.4404). N = Impeller material (S - Fabricated stainless steel 1.4404 or N - Cast stainless steel 1.4408). B = Mechanical seal option: Ceramic/Carbon/EPDM.

Approval Holder:

Xylem Water Solutions UK Ltd

Company Name

Xylem Water Solutions UK Ltd

Address

Private Road 1 Colwick Industrial Estate Colwick

Postcode

NG4 2AN

Country

Nottingham

View All Listings by this Company

Manufacturer:

Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.

Company Name

Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.

Address

View All Listings by this Company

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Note:

R008 does not apply to the stainless steel body models.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C ((CIL3) plastic body models), 99°C (S/Steel body models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Note:

R008 does not apply to the stainless steel body models. R415 does not apply if used on a closed circuit.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. UPM4XL (Added October 2024) - Extra-large version with extended performance. UPM4XXL (Added June 2025) - Extra-large version with extended performance. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70, 75, 90 or 100. (90 variant added October 2024. 100 variant added June 2025). E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘Homebooster’ pump with stainless steel body, plastic impeller and EPDM rubber ‘O’-rings. The product is supplied with two loose brass ¾” captive nut x ½” BSP (M) connectors and fibre gaskets for installation on the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301901

Size:

¾” BSP (M) inlet x outlet (to pump). ½” BSP (M) inlet x outlet (to optional brass connectors).

Marking:

Grundfos and Grundfos logo, type, Product no. and technical info on adhesive label on motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

UPA 15-90 N 160 Homebooster.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of circulation pumps with a stainless steel body, plastic impeller and a silicone ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310317

Size:

½” BSP (F).

Marking:

GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), type, pressure, WRAS and other technical information on adhesive label on pump face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

RS12/1.2EM. RS12/1.2EMB.

Approval Holder:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

Horizontal 5 stage pump with stainless steel body, stainless steel impellers, EPDM and silicone ‘O’-rings. Maximum working pressure 6.2 Bar. BS6920 40°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311316

Size:

1¼” BSP (F).

Marking:

Swiss Pump Company AG logo (‘SPCO®’), model and technical information on adhesive label on pump body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

Z(HMIA).

Approval Holder:

Swiss Pump Company AG

Company Name

Swiss Pump Company AG

Address

Moosweg 36,3645 Thun - Gwatt

Country

Switzerland

View All Listings by this Company

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240507701

Size:

Stainless steel body models (N): 1" BSP (M) (retrospectively added June 2024), 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).

Marking:

Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Model added November 2024: ALPHA SOLAR 25-**2 N 180. Where: UPM3 & ALPHA SOLAR = pump type. For UPM3 these can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (ALPHA SOLAR 1½” model and 2” N models only).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Circulation pump with a stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241104706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Archergas, model and technical information on case. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

DHW15 Circulation Pump.

Approval Holder:

Archergas Limited

Company Name

Archergas Limited

Address

85 Bayham Street, Camden Town

View All Listings by this Company

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Self-priming single stage pump, with stainless steel body, plastic impellers, stainless steel shaft, NBR 'O'-rings and seals. Maximum working pressure 6.0 bar. Maximum operating temperature 45°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241107701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model number, product/version number, technical information, serial number and manufacturing location on adhesive label on motor housing.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2029

Model:

99458789: JP 4-54 1X230V 50Hz 1,5M UK HU IE2.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Hydroo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

VX1 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25), VX3 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25), VX5 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25), VX10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25), VX15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), VX20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), VX32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), VX45 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), VX65 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), VX1 Stainless steel Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VX3 Stainless steel Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VX5 Stainless steel Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VX10 Stainless steel Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16), VF1 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25), VF3 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25), VF5 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25), VF10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25), VF15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), VF20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), VF32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), VF45 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), VF65 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25), VF1 Cast Iron Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VF3 Cast Iron Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VF5 Cast Iron Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VF10 Cast Iron Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16).

Approval Holder:

HYDROO PUMP INDUSTRIES S.L.

Company Name

HYDROO PUMP INDUSTRIES S.L.

Postcode

17843

Country

Spain

General Email

jordi.armengol@hydroo.com

View All Listings by this Company

FVC & FVS Ranges of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Zirantec logo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

FVS 01 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25) & Oval Flange (2 to 26 stages) G1 (F) (PN16). FVS 03 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25) & Oval Flange (2 to 20 stages) G1 (F) (PN16). FVS 05 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25) & Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16). FVS 10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25) & Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16). FVS 15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), FVS 20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), FVS 32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), FVS 44 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), FVS 66 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), FVC 01 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25) & Oval Flange (2 to 26 stages) G1 (F) (PN16). FVC 03 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25) & Oval Flange (2 to 20 stages) G1 (F) (PN16). FVC 05 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25) & Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16). FVC 10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25) & Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16). FVC 15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), FVC 20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), FVC 32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), FVC 44 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), FVC 66 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25),

Product Images

Approval Holder:

F.I.P.S Fabbrica Italiana Pompe Sommergibili SrL

Company Name

F.I.P.S Fabbrica Italiana Pompe Sommergibili SrL

Address

Via dell'Artigianato 16 20072 Pieve Emanuele, Milan

Country

Italy

Phone

0039 0249 708488

General Email

santosh@fips-pumps.it

View All Listings by this Company

Circulation pumps with either bronze or stainless pump bodies and a plastic impeller. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260104703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Ebara logo, model no., serial no. and technical information on data plate. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

EHW-B 25-4-130: 1” BSP (F), EHW-B 25-4-180: 1” BSP (F), EHW-B 25-5-130: 1” BSP (F), EHW-B 25-5-180: 1” BSP (F), EHW-B 25-6-130: 1” BSP (F), EHW-B 25-6-180: 1” BSP (F), EHW-B 25-7-180: 1” BSP (F), EHW-B 25-8-180: 1” BSP (F), EHW-B 25-12-180: 1” BSP (F), EHW-S 20-6-130: ¾” BSP (M), EHW-S 25-6-180: 1” BSP (F), EHW-S 25-7-180: 1” BSP (F), EHW-S 25-8-180: 1” BSP (F), EHW-S 32-8-180: 1¼” BSP (F). Where: B = Bronze body. S = Stainless steel body. 20/25/32 = DN size (mm). 4/5/6/7/8/12 = head (m). 130/180 = Pump body size (length from body inlet to outlet) (mm).

Approval Holder:

Ebara Corporation

Company Name

Ebara Corporation

Address

11-1 Haneda Asahi-cho Ota-ku, Tokyo 144-8510

Country

Japan

View All Listings by this Company

Range of circulating pumps, with plastic or stainless steel (cast EN 1.4308) bodies and a plastic impeller. Maximum working pressures: Stainless steel bodied pumps 10.0 bar, Plastic bodied pumps 3.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260307701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 does not apply to the stainless-steel body models.

Size:

Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).

Marking:

Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/03/2031

Model:

Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPM2 25-** N130, UPM2 25-** N180, UPML 25-** N180, UPMM 25-** N180, UPMXL 25-** N180. 130 or 180 (where applicable) = port to port length in mm. ** stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower heads and a shower handset. The shower heads have a stainless steel body and ball joint, silicon ‘O’-rings and nozzles, and the inlet incorporates a combined NBR washer and stainless steel filter. The shower handset has a stainless steel body, NBR ‘O’-rings and silicon nozzles. All products incorporate a plastic flow regulator on the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106306

Note:

Open outlet use only.

Size:

QS5320xxx: ½” BSP (M). QS5100 & QS5110xxx: ½” BSP (F).

Marking:

QTOO (brand of D Line) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2026

Model:

QS5100xxx - 200mm (overhead shower) QS5110xxx - 300mm (overhead shower) QS5320xxx (hand shower) Where xxx denotes the finish and can be replaced by 1 to 3 digits: M = brushed stainless steel finish. PP1 = polished PVD gunmetal finish.

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

Shower arm incorporating a stainless steel body. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106329

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Modular Products logo (MP) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2026

Model:

MP1705

Approval Holder:

Modular Products Ltd

Company Name

Modular Products Ltd

Address

Unit 1 Modular Business Park Norton Road Stevenage

Postcode

SG1 2FZ

Country

United Kingdom

Phone

07852550494

General Email

steven.lai@modular-products.co.uk

View All Listings by this Company

Range of shower handsets and hoses with either a brass or stainless-steel body (various finishes). Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2112701

Note:

Open outlet use only.

Size:

½” BSP conical nut

Marking:

Vola on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/12/2026

Model:

VOLA T60 XX - Stainless Steel. Where XX denotes surface finish and can be replaced with: 40 = Stainless Steel 61 = Brushed Black 64 = Brushed Copper 70 = Brushed Gold. VOLA T60 XX- Brass model Where XX denotes surface finish and can be replaced with: 02 = Grey 04 = Blue 05 = Orange 06 = Light Green 08 = Yellow 09 = Dark Grey 12 = Mocca 14 = Bright Red 15 = Dark Blue 16 = Chrome 17 = Gloss Black 18 = White 19 = Natural Brass 20 = Brushed Chrome 21 = Carmine Red 25 = Pink 27 = Matt Black 28 = Matt White 60 = Black B61 = Brushed Black 62 = Deep Black 63 = Copper B64 = Brushed Copper 65 = Gold 66 = Dark Gold 68 = Nickel B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of overhead shower outlets incorporating a stainless steel body (various finishes), strainer and flow regulator on the inlets. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2109374

Size:

½” BSP (M)

Marking:

Methven on body. DTC15 on inlet

Installation Requirements:

R001 R040

Expiry date:

30/09/2026

Model:

HEAH08XX HEAH09XX HEAH10XX HEAH11XX The ‘XX’ denotes the surface finish and is replaced by: CP = Chrome plated BK = Matte Black Plated GM = Gun Metal Plated BB = Brushed Brass Plated BK = Brushed Nickel Plated

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Wall outlet with a stainless steel body incorporating a shower handset holder. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240604024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. This approval does not include a shower hose and handset.

Size:

½” BSP (M).

Marking:

Dolphin Solutions Limited on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

DB3073.x.xx - DOLPHIN BLUE FLEXI HOSE WALL OUTLET & HOLDER. The suffix .x in the above codes will be a number 1 - 5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating .5 to denote powder coated. .6 - .9 to denote other material and finish options. For example, DB3073.1 is brushed/satin polished finish. The suffix .xx in above codes is only applicable where the previous suffix is 3 to 5. In this instance xx will be replaced by numbers 00-99 to denote the colour of PVD or powder coat. For example, DB3073.3.50 is brushed/satin polished with Gold PVD coating.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Wall mounted shower outlet comprising of a shower arm (brass body – various finishes) and an overhead shower (stainless steel body – various finishes) incorporating a stainless steel filter washer at the inlet. Maximum operating temperature: 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240688011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Bathroom Brands logo on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

HOX300x Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate

Approval Holder:

Bathroom Brands Group Ltd.

Company Name

Bathroom Brands Group Ltd.

Postcode

DA1 5FU

Country

United Kingdom

Phone

01322 475 739

General Email

David.Cheshire@bathroombrands.com

View All Listings by this Company

Overhead shower outlet with a stainless-steel body and EPDM seals. Maximum operating temperature: 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240804005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Wallgate on adhesive label on shower plate

Installation Requirements:

R001 R040

Expiry date:

31/08/2029

Model:

SNC-02

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Shower handset with a stainless-steel body (various finishes - see model) and silicone nozzles. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250308010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Dolphin Solutions Limited logo (D with a dolphin) on body.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Model:

DB3025.A.BBB Where: The suffix .a in the above codes will be a number 1 - 5 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - .9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVS or powder coat. It can be either two or three digits from 01-999.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

‘Rada’ electronically controlled thermostatic blending valve, with a stainless-steel body, EPDM ‘o’ rings and seals. Maximum working pressure; 13.8 Bar. Maximum operating temperature 85°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

241102001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F).

Marking:

Rada logo & The Brain DRV25 on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

1.1899.002 - DRV25 VALVE MODULE GL.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Three-way diverter valve with a stainless-steel body and stainless-steel ball. Maximum working pressure 9.8 bar Maximum operating temperature 80°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

2205032

Size:

¾” BSP (F) inlet and outlet

Marking:

KITZ and size on body. KITZ, flow arrow and other technical information on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/05/2027

Model:

SSA482B052/MTH-Q4E - CWFV3

Approval Holder:

Mitsubishi Heavy Industries Air conditioning Europe

Company Name

Mitsubishi Heavy Industries Air conditioning Europe

Address

5 The Square Hayes Uxbridge Middlesex

Postcode

UB11 1ET

Country

United Kingdom

Phone

+44(0)75 8663 8352

General Email

mohamed.abdihakim.hp@mhi.com

View All Listings by this Company

‘Aladdin Easyfit Isolator Pro’ valve incorporating a stainless steel body and self cutting blade to enable a connection to a pressurised or wet systems. For use with copper pipe to BS2871 – EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2104300

Size:

15mm Ø

Marking:

Aladdin logo (Aladdin), date of manufacture (MM-YY) and 15mm on body. Aladdin Easyfit Isolator on operating member.

Installation Requirements:

R001

Expiry date:

30/04/2026

Model:

Aladdin Easyfit Isolator Pro

Approval Holder:

NLB Engineering Ltd

Company Name

NLB Engineering Ltd

Address

Units E - F Housham Hall Farm Harlow Road Matching Tye Essex

Postcode

CM17 0RA

Country

United Kingdom

Phone

01279 730363

General Email

www.nlbengineering.co.uk

View All Listings by this Company

Manufacturer:

NLB Engineering Ltd

Company Name

NLB Engineering Ltd

Address

Units E - F Housham Hall Farm Harlow Road Matching Tye Essex

Postcode

CM17 0RA

Country

United Kingdom

Phone

01279 730363

General Email

www.nlbengineering.co.uk

View All Listings by this Company

Range of lever or handwheel operated spherical valves with stainless steel body, stainless steel ball and PTFE seals. Maximum working pressure 20.0 Bar (Models Series 65 & Series 73) Maximum working pressure 50.0 Bar (Models Series 66 & Series 74) Maximum operating temperature 85.0°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

241202034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

DelVal and DN on body. DelVal logo, product code, size, manufacture date (MM/YY) and other technical information on data plate on body. DelVal on lever.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

2pc full bore Series 65 – DN15, DN80, DN100, DN125, DN150, DN200 and DN250 Series 66 - DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150 and DN200 3pc full bore Series 73 - DN15, DN20, DN25, DN32, DN40, DN50, DN65, and DN80 Series 74 - DN15, DN20, DN25, DN32, DN40, DN50, DN65, and DN80

Manufacturer:

DelVal Flow Controls Pvt.Ltd

Company Name

DelVal Flow Controls Pvt.Ltd

Address

Gat No 25, Kavathe, Post Javale, Tal. Khandala, Dist. Satara

Postcode

412801

Country

India

View All Listings by this Company

Spherical valve with stainless steel body, PTFE seat and stainless steel ball. Valve is operated by lever type handle. Maximum operating pressure 18.0 bar. Maximum operating temperature 60°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250104011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

4” Flanged.

Marking:

BAC logo on body. BAC logo and product info on data plate.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

FB Type

Approval Holder:

BAC VALVES, S.A.

Company Name

BAC VALVES, S.A.

Address

Carrer Tapis, 126, 17600 Figueres (Girona)

Country

Spain

View All Listings by this Company

Range of electrically (A20 & A150 series) or battery (E20 & E22 series) operated motorised spherical valves incorporating brass or stainless-steel bodies, stainless steel balls and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

251015014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

A20-T series *-*-* & A20-M series *-*-*: B2 and B3 models: ¼” - 1¼” BSP (F). S2 and S3 models: ¼” - 1” BSP (F). E20-L*-*-B & E22-L*-*-B models: B2 models: ¼” - 1¼” BSP (F). S2 models: ¼” - 1” BSP (F). A150-T series *-*-B & A150-M series *-*-B models: B2 and S2 models: ½” - 2” BSP (F). S3 and S23 models: ½” - 1¼” BSP (F).

Marking:

A20 & A150 series: Model, TONHEFLOW, current, voltage and pressure on adhesive label on the motor housing. Production date (YYMDD or YYMMDD) on body. E20 & E22 series: Model, TONHEFLOW and technical information on adhesive label on the motor housing. Production date (YYMDD or YYMMDD) on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

A20-T series *-*-* & A20-M series *-*-*. Where: T = ON/OFF. M = ON/OFF with adjusting ball angle. 1st * represents the size: 8, 10, 15, 20, 25 or 32, (32 size in B2 and B3 models only). 2nd * = body type and material. B2 = 2-way brass body, B3 = 3-way brass body, S2 = 2-way stainless steel body or S3 = 3-way stainless steel body. 3rd * = operator and indicator options. A = w/o manual operator & w/o on/off indicator, B = with manual operator & with on/off indicator, C = w/o manual operator & with on/off indicator or CH = w/o manual operator & with on/off indicator & with an elevated top cover. e.g., A20-M 8-B3-CH. E20-L*-*-B & E22-L*-*-B. Where: L = LoWaRAN (for Long Range Wide Area Network). 1st * represents the size: 8, 10, 15, 20, 25 or 32. 2nd * = body type and material. B2 = 2-way brass body or S2 = 2-way stainless steel body. B = with manual operator & with on/off indicator. e.g., E22-L 25-S2-B. A150-T series *-*-B & A150-M series *-*-B. Where: T = ON/OFF. M = ON/OFF with adjusting ball angle. 1st * represents the size: 15, 20, 25, 32, 40 or 50, (40 and 50 sizes in B2 and S2 models only). 2nd * = body type and material. B2 = 2-way brass body, S2 = 2-way stainless steel body, S3 = 3-way stainless steel body or S23 = 2-way 3-piece stainless steel body. B = with manual operator & with on/off indicator. e.g., A150-T 50-S2-B.

Approval Holder:

Taizhou Tonhe Flow Control Co., Ltd

Company Name

Taizhou Tonhe Flow Control Co., Ltd

Address

Room 102, Unit 1, No.3 building, Xinshun SME Pioneer Park, Jiangkou Street, Huangyan, Taizhou, Zhejiang

Country

China

Phone

0086‐13566820056

General Email

tonhe@china‐tonhe.com

View All Listings by this Company

Manufacturer:

Taizhou Tonhe Flow Control Co., Ltd

Company Name

Taizhou Tonhe Flow Control Co., Ltd

Address

Unit 1, Building 3, Xinshun SME Pioneer Park, Jiangkou Street, Huangyan District, Taizhou City, Zhejiang Province

Country

China

Phone

0086‐13566820056

General Email

tonhe@china‐tonhe.com

View All Listings by this Company

Range of electrically or battery operated motorised spherical valves incorporating brass, DZR brass or stainless-steel bodies, stainless steel balls and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

251015016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Marking size code: 02=1/4,03=3/8,04=1/2,06=3/4,08=1,12=11/4,14=11/2 & 20=2”, Material: B=Brass/ S= stainless steel

Size:

ABVMxxB (XX denotes port size ¼-11/4”) ABVMxxB3 (XX denotes port size ¼-11/4”) ABVMxxS/ (XX denotes port size ¼-1”) ABVMxxS3/ (XX denotes port size ¼-1”) Sizes: 08, 10, 15, 20, 25 or 32, (32 size in ABVMxxB & ABVMxxB3 models only). ABVxxS/ (XX denotes port size ½-2”) ABVxxB/ (XX denotes port size ½-2”) ABVxxS3/ (XX denotes port size ½-2”) Size: 15, 20, 25, 32, 40 or 50, (40 and 50 sizes in ABVxxB/ & ABVxxS/ models only).

Marking:

CONNEXION and product info on label.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

ABVM Series: ABVMxxB - 2 port Brass body valve ABVMxxB3 - 3 port Brass body valve ABVMxxS/ - 2 port Stainless Steel body valve ABVMxxS3/ - 3 port Stainless Steel body valve ABV Series: ABVxxS/ - 2 way Stainless Steel body valve ABVxxB/ - 2 way Brass body valve ABVxxS3/ - 3 way Stainless Steel body valve

Approval Holder:

Connexion Developments Ltd.

Company Name

Connexion Developments Ltd.

Address

Unit3, Rainbow Court Armstrong Way Bristol

Postcode

BS37 5NG

Country

United Kingdom

Phone

01454 334990

General Email

mike@solenoid-valves.com

View All Listings by this Company

Range of motorised spherical valves with a stainless-steel body and a separate control box. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

251204023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Claims of leak detection have not been verified by test.

Size:

ZKLD20SB3Z5-F1Q4J10 3048 20 S: ¾” BSP (F) ZKLD20SB3Z5-F1Q4J10 3048 25 S: 1” BSP (F).

Marking:

Leaksafe on front cover of control box. KLD and size on valve body. KLD, model code and other technical information on valve actuator.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

ZKLD20SB3Z5-F1Q4J10 3048 20 S - KLD 20S 2 way motorized ball valve, ZKLD20SB3Z5-F1Q4J10 3048 25 S - KLD 25S 2 way motorized ball valve.

Approval Holder:

Leaksafe Solutions Ltd.

Company Name

Leaksafe Solutions Ltd.

Address

Unit D Rose Court 89 Ashford Road Bearsted Kent

Postcode

ME14 4BS

Country

United Kingdom

Phone

0344 848 0488

General Email

sarah.wakley@leaksafe.com

View All Listings by this Company

Electrolytic scale inhibitor incorporating a chrome plated stainless steel body. Compression ends are for use with copper pipe (manufactured to EN1057). Maximum working pressure 8.0 bar. Maximum operating temperature 100°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression

Marking:

Avonflow and WRAS on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/03/2031

Model:

KMAG03

Approval Holder:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company

Manufacturer:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company

Ultra violet disinfection units consisting of a stainless steel body and quartz sleeve. Model WS-10-1206/3030031 Alde Aquaclear has a maximum working pressure of 5.0 bar and a maximum operating temperature of 40°C. All other models have a maximum working pressure of 7.0 bar and a maximum operating temperature of 60°C.

Section:

2411 Disinfection Equipment

Size:

¼” BSP (F).

Marking:

Watersprint, model, flow arrow & other tech info on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/10/2027

Model:

WS-10-1206/3030031 Alde Aquaclear. WS-10-1210 Purify SOLO-10. WS-10-1220 Purify SOLO-20. WS-10-1230 Purify SOLO-30. WS-10-1240 Purify SOLO-40.

Approval Holder:

Watersprint AB

Company Name

Watersprint AB

Address

Medicon Village, Scheeletorget 1 223 81 Lund

Country

Sweden

View All Listings by this Company

Ultra-violet disinfection unit comprising of a stainless-steel body and quartz sleeve. Maximum working pressure 8.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Size:

See models.

Marking:

Silverline, model number and serial number on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/06/2028

Model:

½” BSP (F) ports: UV-DS08/PP/1/2, UV-DS08/1/2/12V, UV-DS08/1/2/R. ¾” BSP (F) ports: UV-DS15/PP/3/4, UV-DS15/PP/3/4/12V, UV-DS15/PP/3/4/R, UV-DS36, UV-DS36AM, UV-DS36AM/R, UV-DS30/PP/3/4, UV-DS30/PP/3/4/12V, UV-DS30/PP/3/4/R, UV-DS30/OS/3/4, UV-DS30/OS/3/4/12V, UV-DS30/OS/3/4/R, UV-DS55/PP/3/4, UV-DS55/PP/3/4/12V, UV-DS55/PP/3/4/R, UV-DS55/OS/3/4, UV-DS55/OS/3/4/12V, UV-DS55/OS/3/4/R, 1” BSP (F) ports: UV-DS75/PP/1, UV-DS75/PP/1/12V, UV-DS75/PP/1/R. 1½” BSP (M) ports: UV-CS110, UV-CS110/AUX, UV-CS165, UV-CS165/AUX. 2” BSP (M) ports: UV-CS220, UV-CS220/AUX, 2½” flanged ports: UV-CS330, UV-CS330/AUX. 3” flanged ports: UV-CS440, UV-CS440/AUX, UV-CS550, UV-CS550/AUX

Approval Holder:

Silverline UK Ltd

Company Name

Silverline UK Ltd

Address

Whitemoor Iddesleigh Winkleigh

Postcode

EX19 8BN

Country

Devon

Phone

01805 804202

General Email

enquiries@silverlineuk.co.uk

View All Listings by this Company

Manufacturer:

Silverline UK Ltd

Company Name

Silverline UK Ltd

Address

Whitemoor Iddesleigh Winkleigh

Postcode

EX19 8BN

Country

Devon

Phone

01805 804202

General Email

enquiries@silverlineuk.co.uk

View All Listings by this Company

Ultra-violet disinfection unit comprising of a stainless-steel body and quartz sleeve. Maximum working pressure 8.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Size:

See models.

Marking:

Beresford-Grey & Company Information on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/06/2028

Model:

1½” BSP (M) ports: BGUV-CS072 & BGUV-CS108 2” BSP (M) ports: BGUV-CS144 2½” flanged ports: BGUV-CS216 3” flanged ports: BGUV-CS288 & BGUV-CS360

Approval Holder:

Pumps & Controls Ltd

Company Name

Pumps & Controls Ltd

Address

The Fox Inn Little Ryton Dorrington Shrewsbury

Postcode

SY5 7LS

Country

United Kingdom

General Email

sales@pumpsandcontrolsltd.co.uk

View All Listings by this Company

UV disinfection unit with stainless steel body. Maximum working pressure 9.0 bar. Maximum operating temperature 55°C.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M) inlet/outlet

Marking:

Dosita, model and technical info on adhesive label on body

Installation Requirements:

R001 R150 R170

Expiry date:

31/05/2029

Model:

UVsafe 4. Models added November 2024: UVSafe 5, UVSafe 6, UVSafe 7, UVSafe 8. Models added February 2026: UVSafe 8A, UVSafe 9, UVSafe 9A, UVSafe 10.

Approval Holder:

Dosita Havuz Ve Su Teknolojilerileri

Company Name

Dosita Havuz Ve Su Teknolojilerileri

Address

Çiftlik Mah Bilgin caddesi no 34 Gölcük Kocaeli Türkiye

View All Listings by this Company

Range of ultraviolet disinfection units consisting of a stainless-steel body and quartz sleeve. Maximum working pressure: 10.0 bar. Maximum operating temperature: 25.0°C.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Aquada 1 – ½” BSP (M), Aquada 2 – ¾” BSP (M), Aquada 4 – ¾” BSP (M), Aquada 7 – 1” BSP (M).

Marking:

Wedeco (Xylem brand) logo, model number, Date of manufacture (YYYY) and other technical data on adhesive label on the body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/11/2029

Model:

AQUADA 1 Altima, AQUADA 1 Promixa, AQUADA 1 Maxima, AQUADA 2 Altima, AQUADA 2 Promixa, AQUADA 2 Maxima, AQUADA 4 Altima, AQUADA 4 Promixa, AQUADA 4 Maxima, AQUADA 7 Altima, AQUADA 7 Promixa, AQUADA 7 Maxima.

Approval Holder:

Xylem Water Solutions Herford GmbH

Company Name

Xylem Water Solutions Herford GmbH

Address

Postfach 5114, 32055 Herford, Germany

General Email

Juergen.vogt@xylem.com

View All Listings by this Company

UV disinfection unit with stainless steel body and quartz sleeves. Maximum working pressure 3.0 bar. Maximum operating temperature 35°C.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” BSF F

Marking:

Bio UV, model, date of manufacture (DD/MM/YY) and other technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/12/2029

Model:

TAP UV

Approval Holder:

Bio-UV group

Company Name

Bio-UV group

Address

850 avenue Louis Médard Lunel

Postcode

34400

Country

France

Phone

+ 33 (0)4 26 89 98 77

General Email

dedet@bio-uv.com

View All Listings by this Company

Ionisation system with stainless steel body and copper & silver electrodes. Maximum working pressure 12.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

2415 Water conditioners - Disinfectant ion generators

Size:

2” BSP (F)

Marking:

Manufacturer’s logo, model & serial number on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/03/2028

Model:

LC1K Models added December 2023: LC8K: 2” BSP (F) or DN100 Flanged. LC16K: 2” BSP (F) or DN100 Flanged.

Approval Holder:

Necon Technologies Limited

Company Name

Necon Technologies Limited

Address

Annaghdown, Corrandulla, Co Galway

Postcode

H91 YCX9

Country

Ireland

View All Listings by this Company

Manufacturer:

Necon Technologies Limited

Company Name

Necon Technologies Limited

Address

Annaghdown, Corrandulla, Co Galway

Postcode

H91 YCX9

Country

Ireland

View All Listings by this Company

Ionisation system with stainless steel body and copper & silver electrodes. Maximum working pressure 12.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

2415 Water conditioners - Disinfectant ion generators

Size:

2” BSP (F) or DN100 Flanged

Marking:

Hydrotec, model & serial number on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/03/2028

Model:

Apollo LC1K Apollo LC8K Apollo LC16K

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company

Range of floor mounted, single hole, single outlet combination tap assemblies (stainless steel body – various finishes) incorporating a ceramic cartridge headwork and manual diverter to shower outlet, with single lever operating members. The spout outlets incorporate a plastic aerator. Product incorporates an approved check valve cartridge at the inlet; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Shower hose and handset is not supplied with this product. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0463 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.

WRAS Approval Number:

251108009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R010 R020

Expiry date:

30/11/2030

Model:

BDM-STU-431-xx. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly with stainless steel body. The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet incorporates a flow regulator and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2203324

Size:

Control box: ½” BSP (M). Tap: Stainless steel braided PEX lined hose with ½” BSP captive nut end connections

Marking:

“Initial” on front of control unit Company name, address, year of manufacturer (YYYY) and other technical information on rear of control unit.

Installation Requirements:

R001 R007 R040 R557

Expiry date:

31/03/2027

Model:

573671

Approval Holder:

Rentokil Initial 1927 plc

Company Name

Rentokil Initial 1927 plc

Address

Compass House Manor Royal Crawley West Sussex

Postcode

RH10 9PY

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Dudley Industries Ltd

Company Name

Dudley Industries Ltd

Address

Preston Road Lytham Lancashire

Postcode

FY8 5AT

View All Listings by this Company

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly with stainless steel body. The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2203352

Size:

Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.

Marking:

“Initial” on front of control unit Company name, address, year of manufacturer (YYYY), contry of manufacturer, Model number and CE marking on rear of control unit.

Installation Requirements:

R001 R006 R009 R557

Expiry date:

31/03/2027

Model:

573672

Approval Holder:

Rentokil Initial 1927 plc

Company Name

Rentokil Initial 1927 plc

Address

Compass House Manor Royal Crawley West Sussex

Postcode

RH10 9PY

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Dudley Industries Ltd

Company Name

Dudley Industries Ltd

Address

Preston Road Lytham Lancashire

Postcode

FY8 5AT

View All Listings by this Company

Range of wall mounted, electronically operated, combination tap assemblies (stainless steel body, various finishes - see model), comprising of a Premix control unit and a spout. The flow is controlled by a solenoid valve, (Premix control unit), which is actuated via an infrared sensor. The central section of the valve incorporates a plastic strainer. Both inlets of the Premix control unit incorporate an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2305303

Note:

This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout.

Size:

½” BSP (M) (to hot and cold inlets of solenoid).

Marking:

QTOO (brand of D Line) on spout trim.

Installation Requirements:

R001 R008 R010 R040 R570

Expiry date:

31/05/2028

Model:

QST3190xxx (190mm spout), QST3290xxx (250mm spout). Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters. As examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (various finishes - see model). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The TK-201LT66 and TK-201LT95 models have a multi-layer PEX lined hose between the solenoid and the spout. The TK-201LT65 models have a stainless steel braided PEX lined flexible hose between the solenoid and the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2309309

Note:

R008 applies to the solenoid

Size:

½” BSP (M)

Marking:

TCK (trade-mark of Xiamen OLT Co., Ltd) on body

Installation Requirements:

R001 R006 R007 R008

Expiry date:

30/09/2028

Model:

TK-201LT66 (Stainless steel body/finish), TK-201LT65-BZ, TK-201LT65-BN, TK-201LT65-CP, TK-201LT95 (Chome plated). Where: BZ: Bronze, BN: Brushed Nickel, CP: Chrome plated.

Approval Holder:

Xiamen OLT Co., Ltd.

Company Name

Xiamen OLT Co., Ltd.

Address

No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City

Country

China

View All Listings by this Company

Manufacturer:

Xiamen OLT Co., Ltd.

Company Name

Xiamen OLT Co., Ltd.

Address

No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City

Country

China

View All Listings by this Company