Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251115305

Section:: 2011 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Concealed. Undefinable Air Gap – See IRN’s Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
JD-AT2**	Various	BSP 1/2" (F) x BSP 3/4" (F)	10 bar	60 °C	Kind	Body	No	1/2 Turn ceramic disk	Not Applicable	Not Applicable
JD-AT3**	Various	BSP 1/2" (F) x BSP 3/4" (F)	10 bar	60 °C	Kind	Body	No	1/2 Turn ceramic disk	Not Applicable	Not Applicable

Notes & Further Information: Note: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251105301

Section:: 2004 Shower Valves
Description:: A Range of Shower valve(s) with manual temperature control, incorporating a self-cancelling diverter with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R030 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes
TVS106353110xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS103353000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVT127001000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS112003000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS125003000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS104353000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS107005000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS106353113xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVT111001000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS122002000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS108008000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS105353110xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS00035100000	null	1/2" F	10 bar	60 °C	null	null	Yes	Ceramic cartridge	null	null	null

Notes & Further Information: TVS00035100000 – Vi-Box is used in conjunction with all of the models. Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

WRAS Approval Number: #260102706

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickel plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 Bar Maximum operating temperature: 85.0°C (D220W models) or 60.0°C (D220CW models)

Section:: 0034 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:: 260102706
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2”, ¾”, 1.1/4” or 1.1/2” BSP (F) (D220W models) 15 & 22mm compression (D220CW models)
Marking:: Crane, DN, PN, flow arrow and CR on body.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: D220W D220CW

Approval Holder:: Crane Ltd

Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

WRAS Approval Number: #251212302

Section:: 0400 Combination Tap Assemblies - Bidet
Description:: A Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
Deck mounted. Stainless-steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
5001JC45-1	Chrome	1/2 BSP(F)	10 bar	85 °C	HUANRI	BODY	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #251215307

Section:: 0440 Headworks
Description:: A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Plastic body/bodies. Brass body/bodies.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/12/2030

Product Identification	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork
35A4	35mm	25 bar	65 °C	Hassem logo	Body	No	Ceramic cartridge
40A	40mm	25 bar	65 °C	Hassem logo	Body	No	Ceramic cartridge
HSP-024	18mm	25 bar	65 °C	HS, Production date(YYYYMMDD)	Body	No	Push button detent
QB-001L	BSP 3/4" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
QB-001R	BSP 3/4" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
HSD-A001L	BSP 1/2" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
HSD-A001R	BSP 1/2" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
HSE-N003L	BSP 1/2" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
HSE-N003R	BSP 1/2" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
QB-318	BSP 3/4" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
QD-445	BSP 1/2" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc
QD-446	BSP 1/2" (M)	25 bar	65 °C	Hassem logo	Body	No	1/4 Turn ceramic disc

Approval Holder:: KAIPING HASSEM SANITARY WARE CO., LTD

Company Name
KAIPING HASSEM SANITARY WARE CO., LTD
Address
No. 68 West Longtang Road Shagang District Shuikou Town Kaiping Guangdong
Country
China

View All Listings by this Company
Manufacturers:: Kaiping Hassem Sanitary Ware Co., Ltd

WRAS Approval Number: #251215309

Section:: 0440 Headworks
Description:: A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Plastic body/bodies
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
D40P-19D		40mm	16 bar	85 °C	MS, D40P-19D	Body	No
D40P-19D2		40mm	16 bar	85 °C	MS, D40P-19D2	Body	No

Approval Holder:: Zhuhai Mingshi Hardware Manufacturing Co.,Ltd

Company Name
Zhuhai Mingshi Hardware Manufacturing Co.,Ltd
Address
No.15,gold coast avenue,sanzao town, jinwan district,zhuhai,china
General Email
sales@zhmingshi.com

View All Listings by this Company
Manufacturers:: Zhuhai Mingshi Hardware Manufacturing Co., Ltd

WRAS Approval Number: #251202301

Section:: 0442 Thermostatic cartridges
Description:: A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/12/2030

Product Identification	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
99078-H	25mm Ø	bar	85 °C	Aerre plast and date of manufacture (MM/YY)	On body	Yes	Not applicable	Not Applicable	Not Applicable
99014-H	32mm Ø	bar	85 °C	Aerre plast and date of manufacture (MM/YY)	On body	Yes	Not applicable	Not Applicable	Not Applicable
G22151-N	34mm Ø	bar	85 °C	Aerre plast and date of manufacture (MM/YY)	On body	Yes	Not applicable	Not Applicable	Not Applicable
99150-H	35mm Ø	bar	65 °C	Aerre plast and date of manufacture (MM/YY)	On body	Yes	Not applicable	Not Applicable	Not Applicable
99095-H	28.5mm Ø	bar	85 °C	Aerre plast and date of manufacture (MM/YY)	On body	Yes	Not applicable	Not Applicable	Not Applicable
99090-H	28.5mm Ø	bar	85 °C	Aerre plast and date of manufacture (MM/YY)	On body	Yes	Not applicable	Not Applicable	Not Applicable

Notes & Further Information: The cartridges 99078-H and 99014-H are re-approvals of certificate 2007006 (Expiry date: 31/07/2025) The cartridges G22151-N, 99150-H, 99095-H, 99090-H are on the same family and we would like to add to the same certificate.

Approval Holder:: Aerre Plast Srl

Company Name
Aerre Plast Srl
Address
Via Novara, 8 Casale Corte Cerro (VB)
Postcode
28881
Country
Italy
Phone
+39 0323 865360
General Email
info@aerreplast.it

View All Listings by this Company
Manufacturers:: Aerre Plast Srl

WRAS Approval Number: #251215311

Section:: 0442 Thermostatic cartridges
Description:: A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
Plastic body/bodies
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/12/2030

Product Identification	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
XB-CT48S001	49mm	16 bar	85 °C	Tzxinbai, XB-CT48S001	Body	No
XB-CT48S002	49mm	16 bar	85 °C	Tzxinbai, XB-CT48S002	Body	No
XB-CT48S003	49mm	16 bar	85 °C	Tzxinbai, XB-CT48S003	Body	No
XB-CT07S	34mm	16 bar	85 °C	Tzxinbai, XB-CT07S	Body	No
XB-CT27S	27mm	16 bar	85 °C	Tzxinbai, XB-CT27S	Body	No
XB-CT28S	28mm	16 bar	85 °C	Tzxinbai, XB-CT28S	Body	No

Product Images

Approval Holder:: TAIZHOU XINBAI SANITARY WARE CO., LTD.

Company Name
TAIZHOU XINBAI SANITARY WARE CO., LTD.
Address
Qinggang Industrial Park, Yuhuan, Taizhou
Country
China

View All Listings by this Company
Manufacturers:: Taizhou Xinbai Sanitary Ware Co., Ltd.

WRAS Approval Number: #251215901

Section:: 0445 Combination Tap Assemblies
Description:: A Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
Deck Mounted Stainless steel braided PEX lined inlet hoses Undefinable Air Gap - See IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R009 R010 R090
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
2720067	Chromed	1/2" Captive nut	10 bar	60 °C	MVI	Body	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: MVI Hazel Ltd.

Company Name
MVI Hazel Ltd.
Address
1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

WRAS Approval Number: #260115901

Section:: 0445 Combination Tap Assemblies
Description:: A Range of Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
Deck Mounted Undefinable Air Gap - See IRN's Stainless-steel braided PEX lined inlet hoses Stainless-steel braided PEX lined connection hoses Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R007 R009 R090
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
JD-WK313P* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK323P* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK2003* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK2003-3* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK743* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,

Notes & Further Information: 1. The first * denotes different handles and can be replaced with A, B, C and D. 2. The second ** represents different types of finishes as follows. C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: white CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251202303

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Model 34127 has nylon braided PEX lined inlet hoses. Models 34010, 34016 & 34017 polyamide braided PE lined inlet hoses. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes
34 010 xx0	Various	G 3/8	10 bar	60 °C	AXOR	on body	Yes	Ceramic cartridge	C-plate	Aerator	Lever Operated Pop-up
34 016 xx0	Various	G 3/8	10 bar	60 °C	AXOR	on body	Yes	Ceramic cartridge	C-plate	Aerator	Lever Operated Pop-up
34 017 xx0	Various	G 3/8	10 bar	60 °C	AXOR	on body	Yes	Ceramic cartridge	C-plate	Aerator	Open Outlet
34 127 xx0	Various	G 3/8	10 bar	60 °C	AXOR	on body	Yes	Ceramic cartridge	C-plate	Aerator	Open Outlet

Notes & Further Information: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:: Hansgrohe SE

WRAS Approval Number: #251215306

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted. Capable of achieving AUK3 Tap Gap Stainless Steel braided PEX lined flexible hose assemblies.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
JD-WB791* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB791H* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB1020* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB1020H* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB1021* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB1021H* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB1022* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB1022H* **	Various	½” captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator

Notes & Further Information: The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251215310

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted. Stainless steel braided, EPDM lined inlet hoses. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
TPASHMONO3	Chromed	1/2" Captive nut	10 bar	60 °C	Lecico bathrooms	Rear of body	No	Ceramic cartridge	C-plate	Aerator
TPSOUMONO3	Chromed	1/2" Captive nut	10 bar	60 °C	Lecico bathrooms	Rear of body	No	1/4 Turn ceramic disc	C-plate	Aerator

Approval Holder:: LECICO Plc.

Company Name
LECICO Plc.
Address
2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD
Postcode
MK410QB
General Email
jrichards@lecico.co.uk

View All Listings by this Company

WRAS Approval Number: #251212305

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck mounted. Stainless-steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes	Includes
4001JC45-1	Chrome	1/2BSP(F)	10 bar	85 °C	HUANRI	BODY	No	Ceramic cartridge	C-plate	Aerator	Click Type
4001JC45-3	Chrome	1/2BSP(F)	10 bar	85 °C	HUANRI	BODY	No	Ceramic cartridge	C-plate	Aerator

Notes & Further Information: The model 4001JC45-1 and 4001JC45-3 taps are same, except that 4001JC45-1 comes with a click-type waste fitting included during sale, while the 4001JC45-3 model does not.

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #260116303

Section:: 0450 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of Achieving AUK3 Tap Gap Stainless steel braided EPDM lined inlet hose
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
T5002	Chrome plating	½” BSF (F) Captive nut	5 bar	65 °C	SONAS	on operating member	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: Sonas Bathrooms

Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: Zhejiang Sanjing Sanitary Ware Technology Co., Ltd.

WRAS Approval Number: #251115317

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless steel braided PEX lined flexible Inlet Hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
K006*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On body	No	1/4 Turn ceramic disc	Not Applicable	Aerator
B006*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On body	No	1/4 Turn ceramic disc	Not Applicable	Aerator
B007*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On body	No	1/4 Turn ceramic disc	Not Applicable	Aerator
K012*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On body	No	1/4 Turn ceramic disc	Not Applicable	Aerator
K013*	Various	½" captive nut	5 bar	65 °C	WINSDRUM	On body	No	Ceramic cartridge	Not Applicable	Aerator

Notes & Further Information: * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:: WINSDRUM Technology (Foshan) Co., Ltd

Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

WRAS Approval Number: #251203302

Section:: 0470 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Capable of achieving AUK3 Tap Gap. Stainless Steel EPDM lined flexible inlet hoses. The product is supplied with 15x15mm compression isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
CNN EFSNK FL6 C	Chrome	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #260116304

Section:: 0470 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless steel braided EPDM lined inlet hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
USH0229	chrome plated	½” BSF (F) Captive nut	5 bar	65 °C	SONAS	on operating member	No	Ceramic cartridge	C-plate	Flow Straightener

Approval Holder:: Sonas Bathrooms

Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: Zhejiang Sanjing Sanitary Ware Technology Co., Ltd.

WRAS Approval Number: #260108301

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless steel braided PE or PEX lined flexible inlet hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
521502 - KANO TP HP CHR	Chrome (CHR)	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
525028 - KANO TP HP ANT / CHR	ANT / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
525030 - KANO TP HP SGW / CHR	SGW / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
525033 - KANO TP HP CAF / CHR	CAF / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526175 - KANO TP HP BLA / CHR	BLA / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526667 - KANO TP HP BL	BL	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526950 - KANO TP HP VGR / CHR	VGR / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526951 - KANO TP HP SOW / CHR	SOW / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator

Notes & Further Information: CHR - Chrome ANT - anthracite SGW - silgranite white CAF - coffee BLA - black BL - black matt VGR - volcano grey SOW - soft white

Approval Holder:: BLANCO GmbH + Co KG

Company Name
BLANCO GmbH + Co KG
Address
Flehinger Strasse 59 Oberderdingen
Postcode
75038
Country
Germany
General Email
certification-water@blanco.de

View All Listings by this Company

WRAS Approval Number: #260117301

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted. Capable of achieving AUK3 tap gap. EPDM lined Stainless Steel braided inlet hoses.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
ROC2MB	MATT BLACK	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2RC	REGENCY COPPER	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2AB	ARTISAN BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2BN	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2PB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073BV	MATT BLACK	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073RC	REGENCY COPPER	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073AB	ARTISAN BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073PB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073BS	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
VITCP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
VITPB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
VITBS	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2PB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2BN	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ZO3BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ZO2BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator

Approval Holder:: Clearwater Products Limited t/a Sterling

Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: ZHEJIANG CORAL SANITARY CO., LTD

WRAS Approval Number: #251115315

Section:: 0490 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a double outlet and a swivel spout.
Deck Mounted stainless-steel or nylon braided PEX inlet hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
SL-KT40602W	Various	1/2" BSP (F)	10 bar	60 °C	Company LOGO	Rear of body	No	1/4 Turn ceramic disk	C-plate	Flow Straightener
SL-KT40502W	Various	1/2" BSP (F)	10 bar	60 °C	Company LOGO	Rear of body	No	Non-rising spindle	C-plate	Flow Straightener

Notes & Further Information: Various finish: (1)Without suffix to current model number:Chrome plated (2)With suffix B:Black (3)With suffix BB:Brushed brass

Approval Holder:: Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name
Taizhou Shenglang Sanitary Ware Co., Ltd.
Address
Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturers:: Taizhou Shenglang Sanitary Ware Co, Ltd.

WRAS Approval Number: #251215304

Section:: 0490 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a double outlet and a swivel spout.
Deck Mounted. Stainless steel braided, EPDM lined, inlet hoses. Capable of achieving AUK3 Tap Gap.
Installation Requirements:: R001 R006
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
2720055	Chromed	½" captive nut	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	C-plate	Flow Straightener
2720060	Chromed	½" captive nut	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	C-plate	Open Outlet
2720062	Chromed	½" captive nut	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	C-plate	Open Outlet

Approval Holder:: MVI Hazel Ltd.

Company Name
MVI Hazel Ltd.
Address
1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

WRAS Approval Number: #251208301

Section:: 0510 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout.
Wall Mounted Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
2437	Chrome plated	1/2"	5 bar	60 °C	DELABIE	Handle	Yes	Single sequential	Not Applicable	Flow Straightener	Flow Regulator Fitted,
2437S	Chrome plated	1/2"	5 bar	60 °C	DELABIE	Handle	Yes	Single sequential	Not Applicable	Flow Straightener	Flow Regulator Fitted,

Product Images

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturers:: Delabie SAS

WRAS Approval Number: #251203303

Section:: 0510 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of Achieving AUK2 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R005 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
K BF C	Chrome 6	3/4" BSP (M)	5 bar	65 °C	Bristan	Indice	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet
RP3 K BF C	Chrome 3	3/4" BSP (M)	5 bar	65 °C	Bristan	Indice	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #251115314

Section:: 0520 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
Wall Mounted Undefinable air gap please see IRN's Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
JD-ATS413* **	Various	¾” x ½” BSP (M) offset unions	10 bar	60 °C	Kind	Handle	No	1/2 Turn ceramic disc	Not Applicable	Aerator	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,

Notes & Further Information: The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #260114307

Section:: 0530 Combination Tap Assemblies
Description:: A Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
Deck Mounted Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R030
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
M33275 X XXX	VARIOUS	3/4” BSP male inlet.	5 bar	65 °C	PPI	BODY	No	1/4 Turn ceramic disk	Metal Backnuts	Flow Straightener	Shower Hose, Handset,

Notes & Further Information: X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Single lever type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD

WRAS Approval Number: #260403302

Section:: 0550 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a swivel spout.
Wall Mounted Undefinable air gap please see IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/04/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VAL2 WMSNK C CD	Crome	1/2" BSP (M)	5 bar	60 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Open Outlet

Notes & Further Information: Note - Both Products are the same, one is wall mount, one is deck mounted.

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #260403304

Section:: 0570 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a double outlet and a swivel spout.
Deck Mounted Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006
Expiry date:: 30/04/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VAL2 BRDSM C CD	Chrome	1/2" BSP (M)	5.0 bar	60 °C	Bristan	Handle	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet
VAL2 BRDSM C 6 CD	Chrome	1/2" BSP (M)	5.0 bar	60 °C	Bristan	Handle	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet

Notes & Further Information: VAL2 BRDSM C 6 CD - has a 6 inch lever

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #251115318

Section:: 0660 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless-steel or nylon braided PEX lined inlet hoses Stainless-steel or nylon braided PEX lined connection hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R007 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
K007*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On base of spout	No	1/4 Turn ceramic disc	Metal Backnuts	Aerator	Interconnecting Hoses,
B008*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On base of spout	No	1/4 Turn ceramic disc	Metal Backnuts	Aerator	Interconnecting Hoses,

Notes & Further Information: * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:: WINSDRUM Technology (Foshan) Co., Ltd

Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

WRAS Approval Number: #251115320

Section:: 0682 Combination Tap Assemblies
Description:: A Range of Spout outlet(s).
Wall mounted Undefinable air gap see IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
TS231**	Various	BSP 1/2" (M)	Open outlet use only bar	60 °C	Kind	Spout and handle	No	Not applicable	Not Applicable	Aerator
TS232**	Various	BSP 1/2" (M)	Open outlet use only bar	60 °C	Kind	Spout and handle	No	Not applicable	Not Applicable	Aerator

Notes & Further Information: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251202715

‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework, water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.

Section:: 0970 Dosing Equipment
Section Subtitle:: Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed
WRAS Approval Number:: 251202715
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 20mm PVC solvent weld connection
Marking:: HydroDOS, model, WRAS and technical data on adhesive label on body.
Installation Requirements:: R001 R120 R160 R170 R415 R511 R575
Expiry date:: 31/12/2030
Model:: HydroDOS HD550G Chlorine dioxide generator (215 g/hr max). HydroDOS HD600G Chlorine dioxide generator (600 g/hr max).

Approval Holder:: Hydrotec International Water Treatment Limited

Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

WRAS Approval Number: #251215703

Filling valve with a DZR brass body comprising of: Two check valve cartridges on the inlet, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve preset at 1.4 bar, a sprung loaded self-closing valve and a single check valve cartridge on the outlet, verified by test (suitable for backflow protection against Fluid Category 2). There is a drain port below the self-closing valve chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 100°C.

Section:: 1015 Filling Loop
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm x 15mm compression.
Marking:: ‘EAGLE’ (brand of SCE TECHNOLOGY (NINGBO) CO., LTD), DN,CR, PN and arrow on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: S0435-1-00-C

Approval Holder:: SCE Technology (Ningbo) Co., Ltd

Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: SCE Technology (Ningbo) Co., Ltd

Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.12, Xinxing Road, Chalu Town, Ninghai County, Ningbo City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #251212016

Range of water meters with blue epoxy coated brass or iron bodies (see models) and a plastic strainer on the inlet. Maximum working pressure 16.0 Bar or10.0 Bar(see models). Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Company logo, size, flow direction on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: LXSG DN15 Dry dial, copper/iron shell, thread ,1/2” (M) BSP,16bar LXSG DN20 Dry dial, copper/iron shell, thread ,3/4” (M) BSP,16bar LXSG DN25 Dry dial, copper/iron shell, thread ,1” (M) BSP,16bar LXSG DN32 Dry dial, copper/iron shell, thread ,1-1/4” (M) BSP,16bar LXSG DN40 Dry dial, copper/iron shell, thread ,1-1/2” (M) BSP,16bar LXSG DN50 Dry dial, copper/iron shell, thread ,2” (M) BSP,16bar LXLG DN65 Dry dial, iron case, fixed flange - British standard DN65, 16bar LXLG DN80 Dry dial, iron case, fixed flange - British standard DN80, 16bar LXLG DN100 Dry dial, iron case, fixed flange - British standard DN100, 16bar LXLG DN125 Dry dial, iron case, fixed flange - British standard DN125, 16bar LXLG DN150 Dry dial, iron case, fixed flange - British standard DN150, 16bar LXSGY DN15 Dry dial, copper/iron shell, thread,1/2” (M) BSP,16bar LXSGY DN20 Dry dial, copper/iron shell, thread,3/4” (M) BSP,16bar LXSGY DN25 Dry dial, copper/iron shell, thread,1” (M) BSP,16bar LXSGY DN32 Dry dial, copper/iron shell, thread,1-1/4” (M) BSP,16bar LXSGY DN40 Dry dial, copper/iron shell, thread,1-1/2” (M) BSP,16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP,16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard DN150,16bar LXSGY DN15 Dry dial, copper/iron shell, thread, 1/2” (M) BSP, 16bar LXSGY DN20 Dry dial, copper/iron shell, thread, 3/4” (M) BSP, 16bar LXSGY DN25 Dry dial, copper/iron shell, thread, 1” (M) BSP, 16bar LXSGY DN32 Dry dial, copper/iron shell, thread, 1-1/4” (M) BSP, 16bar LXSGY DN40 Dry dial, copper/iron shell, thread, 1-1/2” (M) BSP, 16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP, 16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard, DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard, DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard, DN100,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard, DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard, DN150,16bar LXSK DN15 Wet-dial, copper shell, thread, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial, copper shell, thread, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial, copper shell, thread, 1” (M) BSP,10bar LXSK DN32 Wet-dial, copper shell, thread, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial, copper shell, thread, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial, copper shell, thread, 2” (M) BSP,10bar LXSK DN15 Wet-dial,copper shell, thread ,Bluetooth, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial,copper shell, thread ,Bluetooth, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial,copper shell, thread ,Bluetooth, 1” (M) BSP,10bar LXSK DN32 Wet-dial,copper shell, thread ,Bluetooth, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial,copper shell, thread ,Bluetooth, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial,copper shell, thread ,Bluetooth, 2” (M) BSP,10bar LXSKY DN15 Wet-dial,copper shell, thread , MBUS, 1/2” (M) BSP, 10bar LXSKY DN20 Wet-dial,copper shell, thread , MBUS, 3/4” (M) BSP, 10bar LXSKY DN25 Wet-dial,copper shell, thread , MBUS, 1” (M) BSP, 10bar LXSKY DN32 Wet-dial,copper shell, thread , MBUS, 1-1/4” (M) BSP, 10bar LXSKY DN40 Wet-dial,copper shell, thread , MBUS, 1-1/2” (M) BSP, 10bar LXSKY DN50 Wet-dial,copper shell, thread , MBUS, 2” (M) BSP, 10bar

Approval Holder:: Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name
Shandong Chenhui Electronic Technology Co.,Ltd.
Address
East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.
Country
China
Phone
+86 0531- 87856308
General Email
Joh.huo@meide-casting.com

View All Listings by this Company
Manufacturer:: Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name
Shandong Chenhui Electronic Technology Co.,Ltd.
Address
East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.
Country
China
Phone
+86 0531- 87856308
General Email
Joh.huo@meide-casting.com

View All Listings by this Company

WRAS Approval Number: #260104008

Range of flow sensors with brass bodies (various grades - see model). Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M). Internal turbine: 19.54mm O.D
Marking:: With body: SIKA Systemtechnik GmbH logo (SIKA) and address, PN, Part No., CE and batch code (WW YY) on adhesive label on cable. Flow arrow on body. Internal turbine without body: Serial No., SIKA Systemtechnik GmbH logo (SIKA) and batch code (WW YY) on body.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Flow sensors type series VTY15: VY1545abcdefgh & VY1545MAHNefA4 Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd = sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef = electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh = process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy = name of customer (5 digits, e.g. SCHMI, MUELL, …) zz = consecutive number (2 digits, 01…99) & Internal turbine only: VY1545K50000YY

Approval Holder:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company
Manufacturer:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company

WRAS Approval Number: #260288002

Screw down, angled isolation valve with a dome type operating member, incorporating a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M) x ⅜” BSP (M).
Marking:: FANSKI and DR on body.
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: AP145

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

WRAS Approval Number: #250702730

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702730
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: U3 & U5 : 1” BSP (F) inlet x 1” BSP (F) outlet. U7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Felsom, Exa Pumps Srl, model and other technical info on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Proviso:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:: ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. (U) 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3/T (single or three phase): 50-150. U5/T (single or three phase): 70-200. U7 (single phase): 100-300. U7T (three phase): 100-350. U9/T (single or three phase): 100-250. U18 (three phase only): 180-400. Y = Number of impellers. U3, U5 (single or three phase): 2-7 stages. U7 (single phase): 2-6 stages. U7 (three phase): 2-7 stages. U9 (single or three phase): 2-5 stages. U18 (three phase only): 2-4 stages. Suffix T = 3 phase.

Product Images

Approval Holder:: Exa Pumps SrL

Company Name
Exa Pumps SrL
Address
Via Tre Confini, 23 22010 Gera Lario CO
Country
Italy
Phone
0039 0344 910054
General Email
infor@exapumps.com

View All Listings by this Company

WRAS Approval Number: #241002725

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002725
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Felsom, Exa Pumps Srl, model and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:: Exa Pumps SrL

Company Name
Exa Pumps SrL
Address
Via Tre Confini, 23 22010 Gera Lario CO
Country
Italy
Phone
0039 0344 910054
General Email
infor@exapumps.com

View All Listings by this Company

WRAS Approval Number: #251108302

Section:: 1650 Shower Outlets
Description:: A Shower head(s) and/or shower handset(s).
Ceiling Mounted
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
26.569.000	Chrome	1/2" BSP (F)	Open Outlet bar	65 °C	Grohe	faceplate	No

Approval Holder:: Grohe AG

Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturers:: Grohe AG

WRAS Approval Number: #251116304

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
DS3007	chrome	½” BSP (F)	Open outlet bar	85 °C	DELMEI	On handle	No	Not applicable	Not Applicable
DS5010	chrome	½” BSP (F)	Open outlet bar	85 °C	DELMEI	On handle	No	Not applicable	Not Applicable

Approval Holder:: Xiamen Delmei Sanitary Ware Co Ltd

Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturers:: Xiamen Delmei Sanitary Ware Co., Ltd

WRAS Approval Number: #251215305

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
S015*	Various	1/2" BSP (F)	For open outlet use only bar	85 °C	WINSDRUM	On back plate	No	Not applicable	Not Applicable	Not Applicable
S016*	Various	1/2" BSP (F)	For open outlet use only bar	85 °C	WINSDRUM	On back plate	No	Not applicable	Not Applicable	Not Applicable
S017*	Various	1/2" BSP (F)	For open outlet use only bar	85 °C	WINSDRUM	On back plate	No	Not applicable	Not Applicable	Not Applicable
S018*	Various	1/2" BSP (F)	For open outlet use only bar	85 °C	WINSDRUM	On back plate	No	Not applicable	Not Applicable	Not Applicable
S019*	Various	1/2" BSP (M)	For open outlet use only bar	85 °C	WINSDRUM	On body	No	Not applicable	Not Applicable	Not Applicable
S020*	Various	1/2" BSP (M)	For open outlet use only bar	75 °C	WINSDRUM	On body	No	Not applicable	Not Applicable	Not Applicable
S021*	Various	1/2" BSP (M)	For open outlet use only bar	85 °C	WINSDRUM	On body	No	Not applicable	Not Applicable	Not Applicable
S022*	Various	1/2" BSP (M)	For open outlet use only bar	85 °C	WINSDRUM	On body	No	Not applicable	Not Applicable	Not Applicable

Notes & Further Information: * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:: WINSDRUM Technology (Foshan) Co., Ltd

Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

WRAS Approval Number: #251215308

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Wall Mounted Shower handsets. Undefinable airgap - see IRNs
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
S34011	Chrome plated	1/2" BSP (M)	For open outlet use only bar	75 °C	DOMOO	Body	No
S06041	Chrome plated	1/2" BSP (M)	For open outlet use only bar	75 °C	DOMOO	Body	No
S185015(88500103)	Chrome plated	1/2" BSP (M)	For open outlet use only bar	65 °C	DOMOO	Body	No

Approval Holder:: FUJIAN DOMOO SANITARY WARE TECHNOLOGY CO., LTD

Company Name
FUJIAN DOMOO SANITARY WARE TECHNOLOGY CO., LTD
Address
NO.253 SOUTH PATH HIGH-TECHINDUSTRIAL ZONE LUNCANG NAN’AN CITY FUJIAN P.R.
Country
China

View All Listings by this Company
Manufacturers:: FUJIAN DOMOO SANITARY WARE TECHNOLOGY CO., LTD

WRAS Approval Number: #251202304

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
37902W-MB5	BLACK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-MG5	GREEN	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-GB5	BLUE	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-CS5	GREY	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-BP5	PINK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37903W-MB5	BLACK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-MG5	GREEN	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-GB5	BLUE	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-CS5	GREY	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-BP5	PINK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

WRAS Approval Number: #251212303

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
WJ V/HANDLE CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 931 IX	STAINLESS STEEL	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 23931 BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 27931 BBL	BRUSHED BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 28931 MB	MATT BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 21931 BRZ	BRUSHED BRONZE	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 649510 CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 639510 BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 679510 BBL	BRUSHED BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 689510 MB	MATT BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 619510 BRZ	BRUSHED BRONZE	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH G	POLISHED GOLD	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH NK	NICKEL	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 15930 CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 23930 BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 27930 BBL	BRUSHED BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 28930 MB	MATT BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 21930 BRZ	BRUSHED BRONZE	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No

Approval Holder:: Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company
Manufacturers:: ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

WRAS Approval Number: #260116305

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
21-005-481	Chrome plated	½” BSP (M)	Open outlet use bar	65℃ °C	AKW	on handset body.	No				Handset,
21-005-482	White colour	½” BSP (M)	Open outlet use bar	65℃ °C	AKW	on handset body.	No				Handset,

Approval Holder:: AKW Medi-Care Limited

Company Name
AKW Medi-Care Limited
Address
Pointon Way Hampton Lovett Droitwich Spa
Postcode
WR9 0LW

View All Listings by this Company

WRAS Approval Number: #251202013

Range of drain cock elbows incorporating a DZR brass body, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures:16.0 bar. Maximum operating temperature 85°C.

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 251202013
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Model
Marking:: RWC, CR, Size and BS2873 on body. RWC, Size and EN1254-2 on compression nut
Installation Requirements:: R001 R511
Expiry date:: 31/12/2030
Model:: ZELB250445: 22mm compression x ¾” BSP (M). ZELB250446: 28mm compression x 1” BSP (M).

Approval Holder:: Reliance Worldwide Corporation (UK)

Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #251215005

Draining tap with a brass body and a rising spindle headwork. Pressfit jointing is achieved via a crimping tool using a ‘V’ profile and is for use with copper pipes (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 251215005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 14.7mm pressfit x 14mm tail
Marking:: South Coast Sales logo and WRAS on body.
Installation Requirements:: R001 R511
Expiry date:: 31/12/2030
Model:: SCP68001

Approval Holder:: South Coast Sales

Company Name
South Coast Sales
Address
1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.
Postcode
T12 TR62
Country
Ireland
Phone
00353 21 - 43 46 143
General Email
info@southcoastsales.com

View All Listings by this Company

WRAS Approval Number: #260102005

Range of 2, 3 and 4 port manifold assemblies with either DRZ brass (3834.1, 3834.34, 3835.34, 3835.1, 3837.37 & 3837.1) or brushed chrome plated brass bodies incorporating screw down isolation valves with dome type operating members at each of the outlets. Maximum working pressure: 16 Bar. Maximum operating temperature: 95°C.

Section:: 1950 Manifolds
Section Subtitle:: Metal.
WRAS Approval Number:: 260102005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below.
Marking:: FAR, size and made in Italy on body. FAR, size, made in Italy & CR on body (only on models 3834.1, 3834.34, 3835.34, 3835.1, 3837.37 & 3837.1).
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: 2 Port: 3825.34 (3/4” BSP (M) X 3/4“ BSP (F)) 3825.1 (1” BSP (M) X 1” BSP (F)) 3834.1 (1” BSP (M) X 1” BSP (F)) 3834.34 (3/4” BSP (M) X 3/4“ BSP (F)) 38213412EU (3/4” BSP (M) X 1/2“ BSP (M)) 3821 112EU (1” BSP (M) X 1/2“ BSP (M)) 3821 134EU (1” BSP (M) X 3/4“ BSP (M)) 3 Port: 3850.34 (3/4” BSP (M) X 3/4” BSP (F)) 3850.1 (1” BSP (M) X 1” BSP (F)) 3835.34 (3/4” BSP (M) X 3/4” BSP (F)) 3835.1 (1” BSP (M) X 1” BSP (F)) 3822 3412EU (3/4” BSP (M) X 1/2” BSP (F)) 3822112EU (1” BSP (M) X 1/2” BSP (F)) 3822 134EU (1” BSP (M) X 3/4” BSP (F)) 4 Port: 3856.34 (¾” BSP (M) X ¾” BSP (F)) 3856.1 (1” BSP (M) X 1” BSP (F)) 3837.34 (¾” BSP (M) X ¾” BSP (F)) 3837.1 (1” BSP (M) X 1” BSP (F)) 3824 3412EU (1” BSP (M) X 1/2” BSP (F)) 3824 112EU (1” BSP (M) X 1/2” BSP (F)) 3824 134EU (1” BSP (M) X 3/4” BSP (F))

Approval Holder:: FAR Rubinetterie S.p.A.

Company Name
FAR Rubinetterie S.p.A.
Address
Via Morena 20, 28024, Gozzano (NO)

View All Listings by this Company

WRAS Approval Number: #260112304

Section:: 2000 Shower Valves
Description:: A Shower valve(s) with manual temperature control.
Wall Mounted Undefinable Air Gap - See IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
1011JC45	Chrome	½” BSP (M) x ¾” BSP (M) offset union	10 bar	85 °C	HUANRI	Rear of body	No			Open Outlet

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #2309087

T-type thermostatic blending valve with a brushed chrome, DZR brass body. Temperature is pre-set under a fixed cap. The inlets incorporate stainless steel strainers and single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2309087
Size:: 15 & 22mm compression inlet/outlet
Marking:: OV & Oventrop logo, DR and flow arrow on body. Oventrop, temperature & pressure on cap.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: 447 03 74 15mm Compression 447 03 76 22mm Compression

Approval Holder:: Oventrop UK Limited

Company Name
Oventrop UK Limited
Address
Oventrop House Unit 11 Hatch Industrial Park Greywell Road Hatch Basingstoke
Postcode
RG24 7NG
Country
United Kingdom
Phone
+44 (0) 1256 330 441
General Email
mikewise@oventrop.co.uk

View All Listings by this Company

WRAS Approval Number: #251216301

Section:: 2010 Shower Valves
Description:: A Shower valve(s) with thermostatic temperature control
Wall Mounted The thermostatic control incorporates an manual override function
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
F1100*	chrome or matte black	3/4” BSP(F)	5 bar	85 °C	KY-LIN	on body	No	Ceramic cartridge

Notes & Further Information: Where * denotes the finish color, and can be replaced with the following: CHR = Chrome BLK = Matte Black The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Approval Holder:: KYLIN Sanitary Technology (Xiamen) Co., Ltd

Company Name
KYLIN Sanitary Technology (Xiamen) Co., Ltd
Address
No.878, Tongfu Road, Tong’an District, Xiamen City, Fujian Province
Postcode
361100
Country
China
Phone
+86 159 8082 4540
General Email
961459820@qq.com

View All Listings by this Company
Manufacturers:: KYLIN Sanitary Technology (Xiamen) Co., Ltd