Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251202035

‘SLD’ range of copper press fittings with ‘V’ and ‘M’ press profiles and EPDM ‘O’ rings. Fittings to be used with copper pipe manufactured to EN1057. Maximum working pressure: 16 Bar. Maximum operating temperature: 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251202035
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Solerad & size on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: SLD Equal Coupler V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reducing Coupler V Press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD Fitting Reducer V Press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD 90° Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 90° Street Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Street Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Equal Tee V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reduced Tee(Middle) V Press profile 22×15×22 mm 28×15×28 mm 28×22×28 mm 35×15×35 mm 35×22×35 mm 35×28×35 mm 42×15×42 mm 42×22×42 mm 42×28×42 mm 42×35×42 mm 54×22×54 mm 54×28×54 mm 54×35×54 mm 54×42×54 mm SLD Reduced Tee(End) V Press profile 22 x 15 x 15 mm 28 x 22 x 22 mm 35 x 22 x 22 mm 22 x 22 x 15 mm 28 x 28 x 15 mm 28 x 28 x 22 mm 35 x 35 x 22 mm 35 x 35 x 28 mm 42 x 35 x 35 mm SLD End Stop V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Crossover V Press profile 15 mm 22 mm SLD Part Crossover V Press profile 15 mm 22 mm
SLD Equal Coupler M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Slip Long Coupler M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 SLD Reducing Coupler M press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD Fitting Reducer M press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD 90° Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 90° Street Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Street Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Equal Tee M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reduced Tee(Middle) M press profile 22×15×22 mm 28×15×28 mm 28×22×28 mm 35×15×35 mm 35×22×35 mm 35×28×35 mm 42×15×42 mm 42×22×42 mm 42×28×42 mm 42×35×42 mm 54×22×54 mm 54×28×54 mm 54×35×54 mm 54×42×54 mm SLD Reduced Tee(End) M press profile 22 x 15 x 15 mm 28 x 22 x 22 mm 35 x 22 x 22 mm 22 x 22 x 15 mm 28 x 28 x 15 mm 28 x 28 x 22 mm 35 x 35 x 22 mm 35 x 35 x 28 mm 42 x 35 x 35 mm SLD End Stop M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Crossover M press profile 15 mm 22 mm SLD Part Crossover M press profile 15 mm 22 mm

Approval Holder:: Zhejiang Solerad Environment Technology Co., Ltd.

Company Name
Zhejiang Solerad Environment Technology Co., Ltd.
Address
Diankou Industry Zone, Zhuji City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #251204011

Stainless steel M-profile press-fit fittings (316L) and pipes (316L - EN 10312 and 304 – EN 10312). Maximum operating pressure 16 bar. Maximum operating temperature 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251204011
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Lawton and size on fitting body. Lawton logo, CE UKCA, WRAS, DVGW, EN10312, other tech info on pipe.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 45° Elbow 7707000015 15mm 45° Elbow SS 316L Press 7707000018 18mm 45° Elbow SS 316L Press 7707000022 22mm 45° Elbow SS 316L Press 7707000028 28mm 45° Elbow SS 316L Press 7707000035 35mm 45° Elbow SS 316L Press 7707000042 42mm 45° Elbow SS 316L Press 7707000054 54mm 45° Elbow SS 316L Press 7707000067 66.7mm 45° Elbow SS 316L Press 7707000076 76.1mm 45° Elbow SS 316L Press 7707000089 88.9mm 45° Elbow SS 316L Press 7707000108 108mm 45° Elbow SS 316L Press 7707000139 139.7mm 45° Elbow SS 316L Press 7707000169 168.3mm 45° Elbow SS 316L Press 45° Street Elbow 7708000015 15mm 45° Street Elbow SS 316L Press 7708000018 18mm 45° Street Elbow SS 316L Press 7708000022 22mm 45° Street Elbow SS 316L Press 7708000028 28mm 45° Street Elbow SS 316L Press 7708000035 35mm 45° Street Elbow SS 316L Press 7708000042 42mm 45° Street Elbow SS 316L Press 7708000054 54mm 45° Street Elbow SS 316L Press 7708000067 66.7mm 45° Street Elbow SS 316L Press 7708000076 76.1mm 45° Street Elbow SS 316L Press 7708000089 88.9mm 45° Street Elbow SS 316L Press 7708000108 108mm 45° Street Elbow SS 316L Press 7708000139 139.7mm 45° Street Elbow SS 316L Press 7708000168 168.3mm 45° Street Elbow SS 316L Press 90° Elbow 7701000015 15mm 90° Elbow SS 316L Press 7701000018 18mm 90° Elbow SS 316L Press 7701000022 22mm 90° Elbow SS 316L Press 7701000028 28mm 90° Elbow SS 316L Press 7701000035 35mm 90° Elbow SS 316L Press 7701000042 42mm 90° Elbow SS 316L Press 7701000054 54mm 90° Elbow SS 316L Press 7701000067 66.7mm 90° Elbow SS 316L Press 7701000076 76.1mm 90° Elbow SS 316L Press 7701000089 88.9mm 90° Elbow SS 316L Press 7701000108 108mm 90° Elbow SS 316L Press 7701000139 139.7mm 90° Elbow SS 316L Press 7701000168 168.3mm 90° Elbow SS 316L Press 90° Female Elbow 7702001512 15mm X 1/2" 90° Female Elbow SS 316L Press 7702001812 18mm X 1/2" 90° Female Elbow SS 316L Press 7702001834 18mm X 3/4"90° Female Elbow SS 316L Press 7702002234 22mm X 3/4"90° Female Elbow SS 316L Press 7702002801 28mm X 1" 90° Female Elbow SS 316L Press 7702005402 54mm X 2" 90° Female Elbow SS 316L Press 7702035114 35mm X 1.1/4" 90° Female Elbow SS 316L Press 7702042112 42mm X 1.1/2" 90° Female Elbow SS 316L Press 90° Male Elbow 7703001512 15mm X 1/2" 90° Male Elbow SS 316L Press 7703001812 18mm X 1/2" 90° Male Elbow SS 316L Press 7703001834 18mm X 3/4"90° Male Elbow SS 316L Press 7703002234 22mm X 3/4"90° Male Elbow SS 316L Press 7703002801 28mm X 1" 90° Male Elbow SS 316L Press 7703005402 54mm X 2" 90° Male Elbow SS 316L Press 7703035114 35mm X 1.1/4" 90° Male Elbow SS 316L Press 7703042112 42mm X 1.1/2" 90° Male Elbow SS 316L Press 90° Plain Bend 7705000015 15mm 90° Plain Bend SS 316L Press 7705000022 22mm 90° Plain Bend SS 316L Press 7705000028 28mm 90° Plain Bend SS 316L Press 7705000035 35mm 90° Plain Bend SS 316L Press 7705000042 42mm 90° Plain Bend SS 316L Press 7705000054 54mm 90° Plain Bend SS 316L Press 7705000067 66.7mm 90° Plain Bend SS 316L Press 7705000076 76.1mm 90° Plain Bend SS 316L Press 7705000089 88.9mm 90° Plain Bend SS 316L Press 7705000108 108mm 90° Plain Bend SS 316L Press 90° Street Elbow 7704000015 15mm 90° Street Elbow SS 316L Press 7704000018 18mm 90° Street Elbow SS 316L Press 7704000022 22mm 90° Street Elbow SS 316L Press 7704000028 28mm 90° Street Elbow SS 316L Press 7704000035 35mm 90° Street Elbow SS 316L Press 7704000042 42mm 90° Street Elbow SS 316L Press 7704000054 54mm 90° Street Elbow SS 316L Press 7704000067 66.7mm 90° Street Elbow SS 316L Press 7704000076 76.1mm 90° Street Elbow SS 316L Press 7704000089 88.9mm 90° Street Elbow SS 316L Press 7704000108 108mm 90° Street Elbow SS 316L Press 7704000139 139.7mm 90° Street Elbow SS 316L Press 7704000168 168.3mm 90° Street Elbow SS 316L Press Coupler 7715000015 15mm Coupler SS 316L Press 7715000018 18mm Coupler SS 316L Press 7715000022 22mm Coupler SS 316L Press 7715000028 28mm Coupler SS 316L Press 7715000035 35mm Coupler SS 316L Press 7715000042 42mm Coupler SS 316L Press 7715000054 54mm Coupler SS 316L Press 7715000067 66.7mm Coupler SS 316L Press 7715000076 76.1mm Coupler SS 316L Press 7715000089 88.9mm Coupler SS 316L Press 7715000108 108mm Coupler SS 316L Press 7715000139 139.7mm Coupler SS 316L Press 7715000168 168.3mm Coupler SS 316L Press End Cap 7724000015 15mm End Cap SS 316L Press 7724000018 18mm End Cap SS 316L Press 7724000022 22mm End Cap SS 316L Press 7724000028 28mm End Cap SS 316L Press 7724000035 35mm End Cap SS 316L Press 7724000042 42mm End Cap SS 316L Press 7724000054 54mm End Cap SS 316L Press 7724000067 66.7mm End Cap SS 316L Press 7724000076 76.1mm End Cap SS 316L Press 7724000089 88.9mm End Cap SS 316L Press 7724000108 108mm End Cap SS 316L Press Equal Tee 7709000015 15mm Equal Tee SS 316L Press 7709000018 18mm Equal Tee SS 316L Press 7709000022 22mm Equal Tee SS 316L Press 7709000028 28mm Equal Tee SS 316L Press 7709000035 35mm Equal Tee SS 316L Press 7709000042 42mm Equal Tee SS 316L Press 7709000054 54mm Equal Tee SS 316L Press 7709000067 66.7mm Equal Tee SS 316L Press 7709000076 76.1mm Equal Tee SS 316L Press 7709000089 88.9mm Equal Tee SS 316L Press 7709000108 108mm Equal Tee SS 316L Press 7709000139 139.7mm Equal Tee SS 316L Press 7709000168 168.3mm Equal Tee SS 316L Press Female Adaptor 7717001512 15mm X 1/2" Female Adaptor SS 316L Press 7717001534 15mm X 3/4" Female Adaptor SS 316L Press 7717001812 18mm X 1/2" Female Adaptor SS 316L Press 7717001834 18mm X 3/4" Female Adaptor SS 316L Press 7717002201 22mm X 1" Female Adaptor SS 316L Press 7717002212 22mm X 1/2" Female Adaptor SS 316L Press 7717002234 22mm X 3/4" Female Adaptor SS 316L Press 7717002801 28mm X 1" Female Adaptor SS 316L Press 7717002812 28mm X 1/2" Female Adaptor SS 316L Press 7717002834 28mm X 3/4" Female Adaptor SS 316L Press 7717003501 35mm X 1" Female Adaptor SS 316L Press 7717005402 54mm X 2" Female Adaptor SS 316L Press 7717006702 66.7mm X 2" Female Adaptor SS 316L Press 7717007602 76.1mm X 2" Female Adaptor SS 316L Press 7717008903 88.9mm X 3" Female Adaptor SS 316L Press 7717010804 108mm X 4" Female Adaptor SS 316L Press 7717028114 28mm X 1.1/4" Female Adaptor SS 316L Press 7717035114 35mm X 1.1/4" Female Adaptor SS 316L Press 7717042112 42mm X 1.1/2" Female Adaptor SS 316L Press 7717076212 76.1mm X 21/2 Female Adaptor SS 316L Press Female Insert Adaptor 7728001512 15mm X 1/2" Female Insert Adaptor SS 316L Press 7728001834 18mm X 3/4" Female Insert Adaptor SS 316L Press 7728002234 22mm X 3/4" Female Insert Adaptor SS 316L Press 7728002801 28mm X 1" Female Insert Adaptor SS 316L Press 7728005402 54mm X 2" Female Insert Adaptor SS 316L Press 7728006702 67mm X 2" Female Insert Adaptor SS 316L Press 7728008903 89mm X 3" Female Insert Adaptor SS 316L Press 7728010804 108mm X 4" Female Insert Adaptor SS 316L Press 7728035114 35mm X 1.1/4" Female Insert Adaptor SS 316L Press 7728042112 42mm X 1.1/2" Female Insert Adaptor SS 316L Press 7728076212 76mm X 2½ Female Insert Adaptor SS 316L Press Female Reducer Tee 7712001512 15mm X 1/2" Female Reducer Tee SS 316L Press 7712001534 15mm X 3/4" Female Reducer Tee SS 316L Press 7712001812 18mm X 1/2" Female Reducer Tee SS 316L Press 7712002201 22mm X 1" Female Reducer Tee SS 316L Press 7712002212 22mm X 1/2" Female Reducer Tee SS 316L Press 7712002234 22mm X 3/4" Female Reducer Tee SS 316L Press 7712002801 28mm X 1" Female Reducer Tee SS 316L Press 7712002812 28mm X 1/2" Female Reducer Tee SS 316L Press 7712002834 28mm X 3/4" Female Reducer Tee SS 316L Press 7712003501 35mm X 1" Female Reducer Tee SS 316L Press 7712003512 35mm X 1/2" Female Reducer Tee SS 316L Press 7712003534 35mm X 3/4" Female Reducer Tee SS 316L Press 7712004201 42mm X 1" Female Reducer Tee SS 316L Press 7712004212 42mm X 1/2" Female Reducer Tee SS 316L Press 7712004234 42mm X 3/4" Female Reducer Tee SS 316L Press 7712005401 54mm X 1" Female Reducer Tee SS 316L Press 7712005412 54mm X 1/2" Female Reducer Tee SS 316L Press 7712005434 54mm X 3/4" Female Reducer Tee SS 316L Press 7712007601 76.1mm X 1" Female Reducer Tee SS 316L Press 7712007602 76.1mm X 2" Female Reducer Tee SS 316L Press 7712007634 76.1mm X 3/4" Female Reducer Tee SS 316L Press 7712008901 88.9mm X 1" Female Reducer Tee SS 316L Press 7712008902 88.9mm X 2" Female Reducer Tee SS 316L Press 7712008934 88.9mm X 3/4" Female Reducer Tee SS 316L Press 7712010801 108mm X 1" Female Reducer Tee SS 316L Press 7712010802 108mm X 2" Female Reducer Tee SS 316L Press 7712010834 108mm X 3/4" Female Reducer Tee SS 316L Press 7712042112 42mm X 1.1/2" Female Reducer Tee SS 316L Press Fitting Reducer 7723001815 18mm X 15mm Fitting Reducer SS 316L Press 7723002215 22mm X 15mm Fitting Reducer SS 316L Press 7723002218 22mm X 18mm Fitting Reducer SS 316L Press 7723002815 28mm X 15mm Fitting Reducer SS 316L Press 7723002818 28mm X 18mm Fitting Reducer SS 316L Press 7723002822 28mm X 22mm Fitting Reducer SS 316L Press 7723003515 35mm X 15mm Fitting Reducer SS 316L Press 7723003518 35mm X 18mm Fitting Reducer SS 316L Press 7723003522 35mm X 22mm Fitting Reducer SS 316L Press 7723003528 35mm X 28mm Fitting Reducer SS 316L Press 7723004215 42mm X 15mm Fitting Reducer SS 316L Press 7723004222 42mm X 22mm Fitting Reducer SS 316L Press 7723004228 42mm X 28mm Fitting Reducer SS 316L Press 7723004235 42mm X 35mm Fitting Reducer SS 316L Press 7723005415 54mm X 15mm Fitting Reducer SS 316L Press 7723005422 54mm X 22mm Fitting Reducer SS 316L Press 7723005428 54mm X 28mm Fitting Reducer SS 316L Press 7723005435 54mm X 35mm Fitting Reducer SS 316L Press 7723005442 54mm X 42mm Fitting Reducer SS 316L Press 7723007622 76.1mm X 22mm Fitting Reducer SS 316L Press 7723007628 76.1mm X 28mm Fitting Reducer SS 316L Press 7723007635 76.1mm X 35mm Fitting Reducer SS 316L Press 7723007642 76.1mm X 42mm Fitting Reducer SS 316L Press 7723007654 76.1mm X 54mm Fitting Reducer SS 316L Press 7723008922 88.9mm X 22mm Fitting Reducer SS 316L Press 7723008928 88.9mm X 28mm Fitting Reducer SS 316L Press 7723008935 88.9mm X 35mm Fitting Reducer SS 316L Press 7723008942 88.9mm X 42mm Fitting Reducer SS 316L Press 7723008954 88.9mm X 54mm Fitting Reducer SS 316L Press 7723008976 88.9mm X 76.1mm Fitting Reducer SS 316L Press 7723010822 108mm X 22mm Fitting Reducer SS 316L Press 7723010828 108mm X 28mm Fitting Reducer SS 316L Press 7723010835 108mm X 35mm Fitting Reducer SS 316L Press 7723010842 108mm X 42mm Fitting Reducer SS 316L Press 7723010854 108mm X 54mm Fitting Reducer SS 316L Press 7723010876 108mm X 76.1mm Fitting Reducer SS 316L Press 7723010889 108mm X 88.9mm Fitting Reducer SS 316L Press Flange Adaptor 7725000168 168.3mm Flange Adaptor SS 316L Press Full Crossover 7714000015 15mm Full Crossover SS 316L Press 7714000018 18mm Full Crossover SS 316L Press 7714000022 22mm Full Crossover SS 316L Press 7714000028 28mm Full Crossover SS 316L Press Male Adaptor 7719000893 88.9mm X 3" Male Adaptor SS 316L Press 7719001512 15mm X 1/2" Male Adaptor SS 316L Press 7719001834 18mm X 3/4" Male Adaptor SS 316L Press 7719002234 22mm X 3/4" Male Adaptor SS 316L Press 7719002801 28mm X 1" Male Adaptor SS 316L Press 7719003501 35mm X 1" Male Adaptor SS 316L Press 7719005402 54mm X 2" Male Adaptor SS 316L Press 7719006702 66.7mm X 2" Male Adaptor SS 316L Press 7719007602 76.1mm X 2" Male Adaptor SS 316L Press 7719010804 108mm X 4" Male Adaptor SS 316L Press 7719035114 35mm X 1.1/4" Male Adaptor SS 316L Press 7719042112 42mm X 1.1/2" Male Adaptor SS 316L Press 7719076212 76.1mm X 21/2 Male Adaptor SS 316L Press Male Insert Adaptor 7729001512 15mm X 1/2" Male Insert Adaptor SS 316L Press 7729001812 18mm X 1/2" Male Insert Adaptor SS 316L Press 7729001834 18mm X 3/4" Male Insert Adaptor SS 316L Press 7729002201 22mm X 1" Male Insert Adaptor SS 316L Press 7729002212 22mm X 1/2" Male Insert Adaptor SS 316L Press 7729002234 22mm X 3/4" Male Insert Adaptor SS 316L Press 7729002801 28mm X 1" Male Insert Adaptor SS 316L Press 7729002812 28mm X 1/2" Male Insert Adaptor SS 316L Press 7729002834 28mm X 3/4" Male Insert Adaptor SS 316L Press 7729003501 35mm X 1" Male Insert Adaptor SS 316L Press 7729005402 54mm X 2" Male Insert Adaptor SS 316L Press 7729006702 66.7mm X 2" Male Insert Adaptor SS 316L Press 7729008903 88.9mm X 3" Male Insert Adaptor SS 316L Press 7729010804 108mm X 4" Male Insert Adaptor SS 316L Press 7729028114 28mm X 1.1/4" Male Insert Adaptor SS 316L Press 7729035112 35mm X 1.1/2" Male Insert Adaptor SS 316L Press 7729035114 35mm X 1.1/4" Male Insert Adaptor SS 316L Press 7729042112 42mm X 1.1/2" Male Insert Adaptor SS 316L Press 7729042114 42mm X 1.1/4" Male Insert Adaptor SS 316L Press 7729054112 54mm X 1.1/2" Male Insert Adaptor SS 316L Press 7729076212 76.1mm X 2½ Male Insert Adaptor SS 316L Press Part Crossover 7713000015 15mm Part Crossover SS 316L Press 7713000018 18mm Part Crossover SS 316L Press 7713000022 22mm Part Crossover SS 316L Press 7713000028 28mm Part Crossover SS 316L Press Reducer Tee 7710010822 108 X 108 X 22mm Reducer Tee SS 316L Press 7710010828 108 X 108 X 28mm Reducer Tee SS 316L Press 7710010835 108 X 108 X 35mm Reducer Tee SS 316L Press 7710010842 108 X 108 X 42mm Reducer Tee SS 316L Press 7710010854 108 X 108 X 54mm Reducer Tee SS 316L Press 7710010876 108 X 108 X 76.1mm Reducer Tee SS 316L Press 7710010889 108 X 108 X 88.9mm Reducer Tee SS 316L Press 7710181815 18 X 18 X 15mm Reducer Tee SS 316L Press 7710222215 22 X 22 X 15mm Reducer Tee SS 316L Press 7710222218 22 X 22 X 18mm Reducer Tee SS 316L Press 7710282815 28 X 28 X 15mm Reducer Tee SS 316L Press 7710282818 28 X 28 X 18mm Reducer Tee SS 316L Press 7710282822 28 X 28 X 22mm Reducer Tee SS 316L Press 7710353515 35 X 35 X 15mm Reducer Tee SS 316L Press 7710353518 35 X 35 X 18mm Reducer Tee SS 316L Press 7710353522 35 X 35 X 22mm Reducer Tee SS 316L Press 7710353528 35 X 35 X 28mm Reducer Tee SS 316L Press 7710424215 42 X 42 X 15mm Reducer Tee SS 316L Press 7710424218 42 X 42 X 18mm Reducer Tee SS 316L Press 7710424222 42 X 42 X 22mm Reducer Tee SS 316L Press 7710424228 42 X 42 X 28mm Reducer Tee SS 316L Press 7710424235 42 X 42 X 35mm Reducer Tee SS 316L Press 7710545415 54 X 54 X 15mm Reducer Tee SS 316L Press 7710545418 54 X 54 X 18mm Reducer Tee SS 316L Press 7710545422 54 X 54 X 22mm Reducer Tee SS 316L Press 7710545428 54 X 54 X 28mm Reducer Tee SS 316L Press 7710545435 54 X 54 X 35mm Reducer Tee SS 316L Press 7710545442 54 X 54 X 42mm Reducer Tee SS 316L Press 7710676722 66.7 X 66.7 X 22mm Reducer Tee SS 316L Press 7710676728 66.7 X 66.7 X 28mm Reducer Tee SS 316L Press 7710676735 66.7 X 66.7 X 35mm Reducer Tee SS 316L Press 7710676742 66.7 X 66.7 X 42mm Reducer Tee SS 316L Press 7710676754 66.7 X 66.7 X 54mm Reducer Tee SS 316L Press 7710767622 76.1 X 76.1 X 22mm Reducer Tee SS 316L Press 7710767628 76.1 X 76.1 X 28mm Reducer Tee SS 316L Press 7710767635 76.1 X 76.1 X 35mm Reducer Tee SS 316L Press 7710767642 76.1 X 76.1 X 42mm Reducer Tee SS 316L Press 7710767654 76.1 X 76.1 X 54mm Reducer Tee SS 316L Press 7710898922 88.9 X 88.9 X 22mm Reducer Tee SS 316L Press 7710898928 88.9 X 88.9 X 28mm Reducer Tee SS 316L Press 7710898935 88.9 X 88.9 X 35mm Reducer Tee SS 316L Press 7710898942 88.9 X 88.9 X 42mm Reducer Tee SS 316L Press 7710898954 88.9 X 88.9 X 54mm Reducer Tee SS 316L Press 7710898976 88.9 X 88.9 X 76.1mm Reducer Tee SS 316L Press Slip Coupler 7716000015 15mm Slip Coupler SS 316L Press 7716000018 18mm Slip Coupler SS 316L Press 7716000022 22mm Slip Coupler SS 316L Press 7716000028 28mm Slip Coupler SS 316L Press 7716000035 35mm Slip Coupler SS 316L Press 7716000042 42mm Slip Coupler SS 316L Press 7716000054 54mm Slip Coupler SS 316L Press 7716000067 66.7mm Slip Coupler SS 316L Press 7716000076 76.1mm Slip Coupler SS 316L Press 7716000089 88.9mm Slip Coupler SS 316L Press 7716000108 108mm Slip Coupler SS 316L Press 7716000139 139.7mm Slip Coupler SS 316L Press 7716000168 168.3mm Slip Coupler SS 316L Press Straight Union 7727000015 15mm Straight Union SS 316L Press 7727000022 22mm Straight Union SS 316L Press 7727000028 28mm Straight Union SS 316L Press 7727000035 35mm Straight Union SS 316L Press 7727000042 42mm Straight Union SS 316L Press 7727000054 54mm Straight Union SS 316L Press Wallplate Elbow 7726001512 15mm X 1/2" Wallplate Elbow SS 316L Press 7726001534 15mm X 3/4" Wallplate Elbow SS 316L Press 7726001801 18mm X 1" Wallplate Elbow SS 316L Press 7726001812 18mm X 1/2" Wallplate Elbow SS 316L Press 7726001834 18mm X 3/4" Wallplate Elbow SS 316L Press 7726002201 22mm X 1" Wallplate Elbow SS 316L Press 7726002212 22mm X 1/2" Wallplate Elbow SS 316L Press 7726002234 22mm X 3/4" Wallplate Elbow SS 316L Press

Approval Holder:: The Lawton Tube Company Ltd.

Company Name
The Lawton Tube Company Ltd.
Address
Torrington Avenue, Coventry
Postcode
CV4 9AB
Country
United Kingdom
Phone
+44 24 7646 6203 or 024 7646 6203
General Email
mlis@lawtontubes.co.uk

View All Listings by this Company

WRAS Approval Number: #2303411

Flowflex Range of press-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with SS316L pipes. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303411
Size:: see model
Marking:: Flowflex logo, WRAS, Size of fitting.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: STRAIGHT COUPLING SS6270M.15B SS6270M.18B SS6270M.22B SS6270M.28B SS6270M.35B SS6270M.42B SS6270M.54B SS6270M.67B SS6270M.76B SS6270M.89B SS6270M.108B SLIP COUPLING SS6270SM.15B SS6270SM.18B SS6270SM.22B SS6270SM.28B SS6270SM.35B SS6270SM.42B SS6270SM.54B SS6270SM.67B SS6270SM.76B SS6270SM.89B SS6270SM.108B 90 DEGREE EQUAL ELBOW SS6090M.15B SS6090M.18B SS6090M.22B SS6090M.28B SS6090M.35B SS6090M.42B SS6090M.54B SS6090M.67B SS6090M.76B SS6090M.89B SS6090M.108B 90 DEGREE STREET ELBOW SS6092M.15B SS6092M.18B SS6092M.22B SS6092M.28B SS6092M.35B SS6092M.42B SS6092M.54B SS6092M.67B SS6092M.76B SS6092M.89B SS6092M.108B 45 DEGREE EQUAL ELBOW SS6041M.15B SS6041M.18B SS6041M.22B SS6041M.28B SS6041M.35B SS6041M.42B SS6041M.54B SS6041M.67B SS6041M.76B SS6041M.89B SS6041M.108B 45 DEGREE STREET ELBOW SS6040M.15B SS6040M.18B SS6040M.22B SS6040M.28B SS6040M.35B SS6040M.42B SS6040M.54B SS6040M.67B SS6040M.76B SS6040M.89B SS6040M.108B EQUAL TEE SS6130M.15B SS6130M.18B SS6130M.22B SS6130M.28B SS6130M.35B SS6130M.42B SS6130M.54B SS6130M.67B SS6130M.76B SS6130M.89B SS6130M.108B REDUCING TEE SS6130RM.181518B SS6130RM.221522B SS6130RM.221822B SS6130RM.281528B SS6130RM.281828B SS6130RM.282228B SS6130RM.351535B SS6130RM.351835B SS6130RM.352235B SS6130RM.352835B SS6130RM.421542B SS6130RM.421842B SS6130RM.422242B SS6130RM.422842B SS6130RM.423542B SS6130RM.541554B SS6130RM.541854B SS6130RM.542254B SS6130RM.542854B SS6130RM.543554B SS6130RM.544254B SS6130RM.672867B SS6130RM.673567B SS6130RM.674267B SS6130RM.675467B SS6130RM.762276B SS6130RM.762876B SS6130RM.763576B SS6130RM.764276B SS6130RM.765476B SS6130RM.892289B SS6130RM.892889B SS6130RM.893589B SS6130RM.895489B SS6130RM.895489B SS6130RM.897689B SS6130RM.10822108B SS6130RM.10828108B SS6130RM.10835108B SS6130RM.10842108B SS6130RM.10854108B SS6130RM.10876108B SS6130RM.10889108B STOP END SS6301M.15B SS6301M.18B SS6301M.22B SS6301M.28B SS6301M.35B SS6301M.42B SS6301M.54B SS6301M.67B SS6301M.76B SS6301M.89B SS6301M.108B FULL CROSSOVER SS6085M.15B SS6085M.18B SS6085M.22B SS6085M.28B PART CORSSOVER SS6086M.15B SS6086M.18B SS6086M.22B SS6086M.28B FLANGE SSFLM.15B SSFLM.18B SSFLM.22B SSFLM.28B SSFLM.35B SSFLM.42B SSFLM.54B SSFLM.67B SSFLM.76B SSFLM.89B SSFLM.108B REDUCED COUPLING SS6240M.1815B SS6240M.2215B SS6240M.2218B SS6240M.2815B SS6240M.2818B SS6240M.2822B SS6240M.3515B SS6240M.3518B SS6240M.3522B SS6240M.3528B SS6240M.4215B SS6240M.4218B SS6240M.4222B SS6240M.4228B SS6240M.4235B SS6240M.5415B SS6240M.5418B SS6240M.5422B SS6240M.5428B SS6240M.5435B SS6240M.5442B SS6240M.6728B SS6240M.6735B SS6240M.6742B SS6240M.6754B SS6240M.7654B SS6240M.8954B SS6240M.8976B SS6240M.10854B SS6240M.10876B SS6240M.10888B FITTING REDUCER SS6243M.1815B SS6243M.2215B SS6243M.2218B SS6243M.2815B SS6243M.2818B SS6243M.2822B SS6243M.3515B SS6243M.3518B SS6243M.3522B SS6243M.3528B SS6243M.4215B SS6243M.4218B SS6243M.4222B SS6243M.4228B SS6243M.4235B SS6243M.5415B SS6243M.5418B SS6243M.5422B SS6243M.5428B SS6243M.5435B SS6243M.5442B SS6243M.6728B SS6243M.6735B SS6243M.6742B SS6243M.6754B SS6243M.7642B SS6243M.7654B SS6243M.8954B SS6243M.8976B SS6243M.10854B SS6243M.10876B SS6243M.10888B C X MI COUPLING SS6243M.15X1/2B SS6243M.18X1/2B SS6243M.18X3/4B SS6243M.22X1/2B SS6243M.22X3/4B SS6243M.28X3/4B SS6243M.28X1B SS6243M.35X1B SS6243M.35X1.1/4B SS6243M.42X1.1/4B SS6243M.42X1.1/2B SS6243M.54X1.1/2B SS6243M.54X2B SS6243M.67X2B SS6243M.76X2.1/2B SS6243M.89X3B C X FI COUPLING SS6270M.15X1/2B SS6270M.18X1/2B SS6270M.18X3/4B SS6270M.22X1/2B SS6270M.22X3/4B SS6270M.28X3/4B SS6270M.28X1B SS6270M.35X1B SS6270M.35X1.1/4B SS6270M.42X1.1.4B SS6270M.42X1.1/2B SS6270M.54X2B SS6270M.54X2B SWIVEL COUPLING SS6240M.15X1/2B SS6240M.18X1/2B SS6240M.22X3/4B SS6240M.28X1B SS6240M.35X1.1/4B SS6240M.42X1.1/4B SS6240M.54X2B C X C X MI TEE SS6130MMI.15x1/2x15B SS6130MMI.18X1/2X18B SS6130MMI.18X3/4X18B SS6130MMI.22X1/2X22B SS6130MMI.22X3/4X22B SS6130MMI.28X1/2X28B SS6130MMI.28X3/4X28B SS6130MMI.28X1X28B SS6130MMI.35X3/4X35B SS6130MMI.35X1.1/4X35B SS6130MMI.42X3/4X42B SS6130MMI.42X1.1/2X42B SS6130MMI.54X3/4X54B SS6130MMI.54X2X54B C X C X FI TEE SS6130MFI.15x1/2x15B SS6130MFI.18X1/2X18B SS6130MFI.18X3/4X18B SS6130MFI.22X1/2X22B SS6130MFI.22X3/4X22B SS6130MFI.28X1/2X28B SS6130MFI.28X3/4X28B SS6130MFI.28X1X28B SS6130MFI.35X1/2X35B SS6130MFI.42X1/2X42B SS6130MFI.54X1/2X54B SS6130MFI.54X3/4X54B SS6130MFI.54X2X54B SS6130MFI.67X3/4X67B SS6130MFI.67X2X67B SS6130MFI.76X3/4X76B SS6130MFI.76X2X76B SS6130MFI.89X3/4X89B SS6130MFI.108X3/4X108B SS6130MFI.108X3/4X108B SS6130MFI.108X2X108B C X MI 90D ELBOW SS6092M.15x1/2B SS6092M.18X1/2B SS6092M.22X3/4B SS6092M.28X1B SS6092M.35X1.1/4B SS6092M.42x1.1/2B SS6092M.54X1.1/2B SS6092M.54X2B C X FI 90D ELBOW SS6090M.15x1/2B SS6090M.18X1/2B SS6090M.22X3/4B SS6090M.28X1B SS6090M.35X1.1/4B SS6090M.42X1.1/2B SS6090M.54X2B C X MI 90D SHORT ELBOW SS6092MSE.15x1/2B SS6092MSE.18X1/2B SS6092MSE.22X3/4B SS6092MSE.28X1B SS6092MSE.35X1.1/4B SS6092MSE.42X1.1/2B SS6092MSE.54X2B C X FI 90D SHORT ELBOW SS6090MSE.15x1/2B SS6090MSE.18X1/2B SS6090MSE.22X1/2B SS6090MSE.22X3/4B SS6090MSE.28X1B SS6090MSE.35X1.1/4B CXFI 90D WALLPLATE ELBOW SS6472M.15X1/2B SS6472M.15X1/2B SS6472M.22X3/4B SS6472M.28X1B SS6472M.35X1.1/4B

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #251204705

Range of domestic stainless steel indirect unvented hot water storage cylinders, incorporating a stainless-steel coil for connection to external heating resource. The secondary circuit is factory fitted with a temperature and pressure relief valve (7.0 Bar @90°C) and an immersion heater. Primary working pressure: 3 bar; secondary working pressure: 5.5 bar. Maximum operating temperature 90 °C.

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 251204705
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F).
Marking:: Midea, model & tech info including pressure and capacity on adhesive label on body.
Installation Requirements:: R001 R140
Expiry date:: 31/12/2030
Model:: MT-S190W 180 litre water storage tank without electric heating MT-S190WE15 180 litre, 1500 watt electric water storage tank MT-S190WE30 180 litre, 3000 watt electric water storage tank MT-S270W 250 litre water storage tank without electric heating MT-S270WE15 250 litre, 1500 watt electric water storage tank MT-S270WE30 250 litre, 3000 watt electric water storage tank model codes: MT: Midea Tank S：Stainless W：Water cycle heater E：Electrical 190/270: water tank volume 190: 180 litre 270: 250 litre 15/30: the wattage of electricity 15: 1500W 30: 3000W

Approval Holder:: GD Midea Heating & Ventilating Equipment Co., Ltd.

Company Name
GD Midea Heating & Ventilating Equipment Co., Ltd.
Address
Penglai Industry Road Beijiao, Shunde, Foshan, Guangdong
Postcode
528311
Country
China
Phone
+86 13902810522
General Email
genrong.li@midea.com

View All Listings by this Company

WRAS Approval Number: #251212016

Range of water meters with blue epoxy coated brass or iron bodies (see models) and a plastic strainer on the inlet. Maximum working pressure 16.0 Bar or10.0 Bar(see models). Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Company logo, size, flow direction on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: LXSG DN15 Dry dial, copper/iron shell, thread ,1/2” (M) BSP,16bar LXSG DN20 Dry dial, copper/iron shell, thread ,3/4” (M) BSP,16bar LXSG DN25 Dry dial, copper/iron shell, thread ,1” (M) BSP,16bar LXSG DN32 Dry dial, copper/iron shell, thread ,1-1/4” (M) BSP,16bar LXSG DN40 Dry dial, copper/iron shell, thread ,1-1/2” (M) BSP,16bar LXSG DN50 Dry dial, copper/iron shell, thread ,2” (M) BSP,16bar LXLG DN65 Dry dial, iron case, fixed flange - British standard DN65, 16bar LXLG DN80 Dry dial, iron case, fixed flange - British standard DN80, 16bar LXLG DN100 Dry dial, iron case, fixed flange - British standard DN100, 16bar LXLG DN125 Dry dial, iron case, fixed flange - British standard DN125, 16bar LXLG DN150 Dry dial, iron case, fixed flange - British standard DN150, 16bar LXSGY DN15 Dry dial, copper/iron shell, thread,1/2” (M) BSP,16bar LXSGY DN20 Dry dial, copper/iron shell, thread,3/4” (M) BSP,16bar LXSGY DN25 Dry dial, copper/iron shell, thread,1” (M) BSP,16bar LXSGY DN32 Dry dial, copper/iron shell, thread,1-1/4” (M) BSP,16bar LXSGY DN40 Dry dial, copper/iron shell, thread,1-1/2” (M) BSP,16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP,16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard DN150,16bar LXSGY DN15 Dry dial, copper/iron shell, thread, 1/2” (M) BSP, 16bar LXSGY DN20 Dry dial, copper/iron shell, thread, 3/4” (M) BSP, 16bar LXSGY DN25 Dry dial, copper/iron shell, thread, 1” (M) BSP, 16bar LXSGY DN32 Dry dial, copper/iron shell, thread, 1-1/4” (M) BSP, 16bar LXSGY DN40 Dry dial, copper/iron shell, thread, 1-1/2” (M) BSP, 16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP, 16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard, DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard, DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard, DN100,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard, DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard, DN150,16bar LXSK DN15 Wet-dial, copper shell, thread, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial, copper shell, thread, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial, copper shell, thread, 1” (M) BSP,10bar LXSK DN32 Wet-dial, copper shell, thread, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial, copper shell, thread, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial, copper shell, thread, 2” (M) BSP,10bar LXSK DN15 Wet-dial,copper shell, thread ,Bluetooth, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial,copper shell, thread ,Bluetooth, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial,copper shell, thread ,Bluetooth, 1” (M) BSP,10bar LXSK DN32 Wet-dial,copper shell, thread ,Bluetooth, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial,copper shell, thread ,Bluetooth, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial,copper shell, thread ,Bluetooth, 2” (M) BSP,10bar LXSKY DN15 Wet-dial,copper shell, thread , MBUS, 1/2” (M) BSP, 10bar LXSKY DN20 Wet-dial,copper shell, thread , MBUS, 3/4” (M) BSP, 10bar LXSKY DN25 Wet-dial,copper shell, thread , MBUS, 1” (M) BSP, 10bar LXSKY DN32 Wet-dial,copper shell, thread , MBUS, 1-1/4” (M) BSP, 10bar LXSKY DN40 Wet-dial,copper shell, thread , MBUS, 1-1/2” (M) BSP, 10bar LXSKY DN50 Wet-dial,copper shell, thread , MBUS, 2” (M) BSP, 10bar

Approval Holder:: Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name
Shandong Chenhui Electronic Technology Co.,Ltd.
Address
East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.
Country
China
Phone
+86 0531- 87856308
General Email
Joh.huo@meide-casting.com

View All Listings by this Company
Manufacturer:: Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name
Shandong Chenhui Electronic Technology Co.,Ltd.
Address
East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.
Country
China
Phone
+86 0531- 87856308
General Email
Joh.huo@meide-casting.com

View All Listings by this Company

WRAS Approval Number: #260202009

Range of ultrasonic water meters with a blue epoxy coated ductile iron body and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar. Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50 – DN200 flanged
Marking:: Ningbo water meters logo, model, and product info on meter face. DN and direction of flow arrow on body.
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: UL-BW

Approval Holder:: Ningbo Water Meter (Group) Co., Ltd

Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #251202025

Range of water meters with plastic bodies and plastic working chamber and EPDM ‘O’ rings. The inlets incorporate a plastic filter. Maximum working pressure 16.0 Bar. Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN15 (3/4” BSP M) DN20 (1” BSP M)
Marking:: Ningbo water meters logo, model, and product info on meter face. DN and direction of flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: MJ-SDC

Approval Holder:: Ningbo Water Meter (Group) Co., Ltd

Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #251202026

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN15 (3/4” BSP M) DN20 (1” BSP M)
Marking:: Ningbo water meters logo, model, and product info on meter face. DN and direction of flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: PD-SDC

Approval Holder:: Ningbo Water Meter (Group) Co., Ltd

Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #251204022

Water meter carrier with DZR brass body. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1510 Water Meter Manifolds
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (M).
Marking:: Altecnic logo, Altecnic, flow arrow, and CR on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 126-4101

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #251212019

Individual threaded fitting with SUS316L body. Maximum working pressure: 6 bar Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F).
Marking:: PAT on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: MT-FT - Joint Pipe.

Approval Holder:: CN PAT CO LTD.

Company Name
CN PAT CO LTD.
Address
21 Jintong Tangxia Pengjiang Jiangmen Guangdong
Country
CHINA
Phone
0086 1392828 1914
General Email
sam.peng@pushingairtech.com

View All Listings by this Company

WRAS Approval Number: #251288002

Range of metering stations with DZR brass bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” -2” BSP (F) inlet x ½” -2” BSP (M) outlet (DN15 – DN50).
Marking:: OV, flow arrow and DN cast on body..
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 1060644, 1060634, 1060604, 1060606, 1060608, 1060610, 1060612, 1060616.

Approval Holder:: Oventrop GmbH & Co KG

Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company
Manufacturer:: Oventrop GmbH & Co KG

Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company

WRAS Approval Number: #251202033

Range of stainless-steel pressure sensors. Maximum working pressures: B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o (Thread G1): 10.0 bar. B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with METEC - metallic measuring cell: 25.0 bar, B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with Piezoresistive - metallic measuring cell: 40.0 bar. Maximum operating temperature 100°C

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o: 1” BSP (M). B83.a-b-LF-e-f-g-h-i-j-k-l-m-n-o: ½” NPT (M) & ¼” NPT (F). B83.a-b-D8/N8/D4/CQ/VE/CH-e-f-g-h-i-j-k-l-m-n-o: DN25, DN50 and DN80 flanged.
Marking:: VEGA on body. VEGA model, serial number, date of manufacture (YYYY) and other technical information on adhesive label or data plate on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: VEGABAR 83 range: B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o a = Scope: • Not relevant for WRAS approval b = Approval: • Not relevant for WRAS approval cd = Process fitting / Material (NOTE - PN40 indicated below is possible maximum, the actual maximum working pressure is dictated by measuring cell, see entry ‘e’): • Material: 316L, Alloy C276 • Threads o C5: Thread G1, ISO228-1 / 316L (only Piezoresistive - metallic measuring cell) o LF: Thread ½NPT, innen ¼NPT, ASME B1.20.1 / 316L - D8: Flange DN25 PN40 Form C, EN1092-1/ 316/316L (only Piezoresistive - metallic measuring cell) - N8: Flange DN25 PN40 Form B1, EN1092-1 / 316/316L - D4: Flange DN50 PN40 Form C, EN1092-1/ 316/316L - CQ: Flange DN50 PN40 Form B1, EN1092-1 / 316/316L - VE: Flange DN80 PN40 Form C, EN1092-1 / 316/316L - CH: Flange DN80 PN40 Form B1, EN1092-1 / 316/316L e = Process temperature • Is up to the Process fitting and Material Thread C5 -> 3 (EPDM) High Temperature (METEC measuring cell): F, H, or T Low temperature (Piezoresistive - metallic measuring cell): S or E f = Pressure • Relative pressure (measurement against atmosphere) • Absolute pressure (measurement against vacuum) • Relative pressure climate-compensated (measurement against atmosphere) g = Measuring range • Not relevant for WRAS approval (maximum is 40 bar) h = Accuracy class • Different accuracy classes from 0.075 % to 0.20 % i = Electronics • Not relevant for WRAS approval j = Supplementary electronics • Not relevant for WRAS approval k = Housing • Not relevant for WRAS approval l = Housing version / Protection • Not relevant for WRAS approval m = Cable entry / Connection • Not relevant for WRAS approval n = Display/adjustment module PLICSCOM • Not relevant for WRAS approval o = Certificates • M – Yes o Foodstuff/Pharmaceutical certificate: WRAS

Approval Holder:: VEGA Grieshaber KG

Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company
Manufacturer:: VEGA Grieshaber KG

Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company

WRAS Approval Number: #260104008

Range of flow sensors with brass bodies (various grades - see model). Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M). Internal turbine: 19.54mm O.D
Marking:: With body: SIKA Systemtechnik GmbH logo (SIKA) and address, PN, Part No., CE and batch code (WW YY) on adhesive label on cable. Flow arrow on body. Internal turbine without body: Serial No., SIKA Systemtechnik GmbH logo (SIKA) and batch code (WW YY) on body.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Flow sensors type series VTY15: VY1545abcdefgh & VY1545MAHNefA4 Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd = sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef = electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh = process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy = name of customer (5 digits, e.g. SCHMI, MUELL, …) zz = consecutive number (2 digits, 01…99) & Internal turbine only: VY1545K50000YY

Approval Holder:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company
Manufacturer:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company

WRAS Approval Number: #251202716

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 251202716
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (F)
Marking:: Ultra models = Pentax logo, model and technical data on data plate on body Plus models = Foras logo, model and technical data on data plate on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: U 3A-90/4; U 3A-100/5 - 35 °C U 5A-120/4; U 5A-150/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C P 3A-90/4; P 3A-100/5 - 35 °C P 5A-120/4; P 5A-150/5 - 35 °C P 3A-90/4 T; P 3A-100/5 T - 35 °C P 5A-120/4 T; P 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C P 3SA-90/4; P 3SA-100/5 - 80 °C P 5SA-120/4; P 5SA-150/5 - 80 °C P 3SA-90/4 T; P 3SA-100/5 T - 80 °C P 5SA-120/4 T; P 5SA-150/5 T - 80 °C

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #251202719

Range of self-priming electric booster pumps with plastic bodies incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 4.5 Bar Maximum operating temperature 50.0°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 251202719
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Available in both ¾” BSP (M) or ¾” NPT (M)
Marking:: DAB company logo on pump body
Installation Requirements:: R001 R008 R415
Expiry date:: 31/12/2030
Model:: 60220687 EsyBox Pop (Pressurisation booster system) 60217710 ESYDOCK POP (Base for an easy assembling of the pump Esybox Pop on the wall, provided with BSP and NPT threaded connections.)

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

WRAS Approval Number: #251215308

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Wall Mounted Shower handsets. Undefinable airgap - see IRNs
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
S34011	Chrome plated	1/2" BSP (M)	For open outlet use only bar	75 °C	DOMOO	Body	No
S06041	Chrome plated	1/2" BSP (M)	For open outlet use only bar	75 °C	DOMOO	Body	No
S185015(88500103)	Chrome plated	1/2" BSP (M)	For open outlet use only bar	65 °C	DOMOO	Body	No

Approval Holder:: FUJIAN DOMOO SANITARY WARE TECHNOLOGY CO., LTD

Company Name
FUJIAN DOMOO SANITARY WARE TECHNOLOGY CO., LTD
Address
NO.253 SOUTH PATH HIGH-TECHINDUSTRIAL ZONE LUNCANG NAN’AN CITY FUJIAN P.R.
Country
China

View All Listings by this Company
Manufacturers:: FUJIAN DOMOO SANITARY WARE TECHNOLOGY CO., LTD

WRAS Approval Number: #251202304

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
37902W-MB5	BLACK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-MG5	GREEN	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-GB5	BLUE	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-CS5	GREY	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-BP5	PINK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37903W-MB5	BLACK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-MG5	GREEN	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-GB5	BLUE	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-CS5	GREY	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-BP5	PINK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

WRAS Approval Number: #251202013

Range of drain cock elbows incorporating a DZR brass body, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures:16.0 bar. Maximum operating temperature 85°C.

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 251202013
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Model
Marking:: RWC, CR, Size and BS2873 on body. RWC, Size and EN1254-2 on compression nut
Installation Requirements:: R001 R511
Expiry date:: 31/12/2030
Model:: ZELB250445: 22mm compression x ¾” BSP (M). ZELB250446: 28mm compression x 1” BSP (M).

Approval Holder:: Reliance Worldwide Corporation (UK) Ltd

Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #251202040

Flexible safety hose assembly with PVC, composite inner hose and corrugated outer cover incorporating EPDM gaskets. The inlet of the hose incorporates a plastic strainer. The hose is fitted with an integral device which is intended to stop the flow of water (please note that this function has not been verified by test). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 251202040
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: This product has not been tested or approved for anti-flooding claims made by the approval holder.
Size:: ¾” captive nut
Marking:: TP REFLEX, flow arrow, date of manufacture (DD.WW.YYYY), WRAS and technical information on cover of valve body. TP REFLEX and date of manufacture (date wheel) on elbow connection
Installation Requirements:: R001 R008
Expiry date:: 31/12/2030
Model:: S18 Safety inlet hose

Approval Holder:: TP Reflex Group S.p.A

Company Name
TP Reflex Group S.p.A
Address
Via Brescia 8, Tradate (VA)
Country
Italy
Phone
0331 816611
General Email
info@tp-spa.com

View All Listings by this Company

WRAS Approval Number: #251202038

Range of ‘THINK-A-FLEX’, EPDM lined, stainless steel braided flexible hose assemblies incorporating various end connections Maximum working pressure: 10 BAR Maximum operating temperature: 65°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 251202038
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models below
Marking:: FF, Wras and year of manufacture (YY) on Ferrule
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: Model/Code number product name Description connection Size 20.001.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-D10 INOX 3/4"F-D10 20.002.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-D15 INOX 3/4"F-D15 20.01.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-D10 INOX 3/8"F-D10 20.011.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-D12 INOX 3/8"F-D12 20.012.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-D12 INOX 1/2"F-D12 20.014.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-D12 INOX 1/2"F-D12 20.015.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-D15 INOX 1/2"F-D15 20.016.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX D15-D15 INOX D15-D15 20.02.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-D10 INOX 1/2"F-D10 20.07.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-D10 INOX BI10-D10 20.08.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-D10 INOX BI12-D10 20.09.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-D12 INOX BI12-D12 20.091.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-D12 INOX BI10-D12 20.092.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-BI15 INOX BI12-BI15 20.093.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-D15 INOX BI10-D15 20.094.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-D15 INOX BI12-D15 20.100.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-1/4"M INOX 1/4"M-1/4"M 20.11.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10(3D)-D10 INOX BI10(3D)-D10 20.12.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-D10 INOX BI15-D10 20.125.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-D15 INOX BI15-D15 20.13.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-M10K INOX BI12-M10K 20.14.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-D10 INOX 3/8"M-D10 20.15.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-D10 INOX 1/2"M-D10 20.151.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-D12 INOX 1/2"M-D12 20.152.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-D15 INOX 1/2"M-D15 20.15R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-D10 INOX 1/2"MR-D10 20.17.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-D12 INOX 3/8"M-D12 20.20.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX D10-D10 INOX D10-D10 20.201.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX D10-D10 INOX D10-D10 20.2012.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX D12-D12 INOX D12-D12 20.2013.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX D10-D12 INOX D10-D12 20.22.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-D10 INOX M10K-D10 20.2212.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-D12 INOX M10K-D12 20.24.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-BI12 INOX M10K-BI12 20.249.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-BI10 INOX M10K-BI10 20.25.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-3/8"F INOX M10K-3/8"F 20.250.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-BI10(3D) INOX M10K-BI10(3D) 20.271.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-M10K INOX BI15-M10K 20.271Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-M10K INOX QTT15-M10K 20.28.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-1/2"F INOX M10K-1/2"F 20.288.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-3/4"F INOX M10K-3/4"F 20.298.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX D12-D12 INOX D12-D12 20.30.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-3/8"F INOX M12K-3/8"F 20.301.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-BI12 INOX M12K-BI12 20.302.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-3/8"M INOX M12K-3/8"M 20.303.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-1/2"M INOX-FF M12K-1/2"M 20.304Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-QTT12 INOX M10K-QTT12 20.305Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-QTT12 INOX M12K-QTT12 20.306Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-QTT14 INOX M12K-QTT14 20.307Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-QTT14 INOX M10K-QTT14 20.308.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-M12K INOX M10K-M12K 20.31.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-1/2"F INOX M12K-1/2"F 20.313.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN08 INOX M12K-BI15 INOX M12K-BI15 20.313Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN08 INOX M12K-QTT15 INOX M12K-QTT15 20.32.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/8"F INOX 3/8"M-3/8"F 20.33.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-1/2"F INOX 3/8"M-1/2"F 20.330.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/8"M INOX 3/8"M-3/8"M 20.331.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-3/8"M INOX 1/4"M-3/8"M 20.332.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-1/2"M INOX 1/4"M-1/2"M 20.333.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/4"F INOX 3/8"M-3/4"F 20.34.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/8"F INOX 1/2"M-3/8"F 20.341.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-3/8"F INOX 1/4"M-3/8"F 20.342.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-1/2"F INOX 1/4"M-1/2"F 20.343.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-3/4"F INOX 1/4"M-3/4"F 20.34R.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-3/8"F INOX 1/2"MR-3/8"F 20.34SF.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/8"SF INOX 1/2"M-3/8"SF 20.35.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"F INOX 1/2"M-1/2"F 20.35R.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-1/2"F INOX 1/2"MR-1/2"F 20.36.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/4"F INOX 1/2"M-3/4"F 20.36R.XXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-3/4"F INOX 1/2"MR-3/4"F 20.38.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-3/4"F INOX 3/4"M-3/4"F 20.381.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-1/4"F INOX 3/4"M-1/4"F 20.388.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-3/4"M INOX 3/4"M-3/4"M 20.389.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-3/4"M INOX 3/8"F-3/4"M 20.39.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-1/2"F INOX 3/4"M-1/2"F 20.400.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"M INOX 1/2"M-1/2"M 20.401R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"MR INOX 1/2"M-1/2"MR 20.402.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-1/2"M INOX 3/8"M-1/2"M 20.403.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/8"M INOX 3/8"M-3/8"M 20.407.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/4"F INOX 1/2"M-1/4"F 20.408.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-1/2"M INOX 3/4"M-1/2"M 20.409.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-3/4"M INOX 3/4"M-3/4"M 20.41.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"F-1/2"F INOX 1/4"F-1/2"F 20.411.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"F-1/4"F INOX 1/4"F-1/4"F 20.412.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"SF-1/4"SF INOX 1/4"SF-1/4"SF 20.413.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"F-3/8"M INOX 1/4"F-3/8"M 20.42.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-3/8"F INOX 3/8"F-3/8"F 20.42SF.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"SF-3/8"SF INOX 3/8"SF-3/8"SF 20.43.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-1/2"F INOX 3/8"F-1/2"F 20.44.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-1/2"F INOX 1/2"F-1/2"F 20.45.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-3/4"F INOX 1/2"F-3/4"F 20.46.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-3/4"F INOX 3/4"F-3/4"F 20.46Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-QTT12 INOX 3/4"F-QTT12 20.47.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-3/4"F INOX 3/8"F-3/4"F 20.49.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-3/8"M INOX M10K-3/8"M 20.498.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-BOCHT SF SP INOX 3/8"F-BOCHT SF SP 20.51R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-1/2"MR INOX M10K-1/2"MR 20.56.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-3/8"F INOX BI15-3/8"F 20.57.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-3/8"F INOX BI12-3/8"F 20.577Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-3/8"FC INOX QTT12-3/8"FC 20.58.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-3/8"F INOX BI10-3/8"F 20.588Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-3/8"FC INOX QTT10-3/8"FC 20.58Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-3/8"F INOX QTT10-3/8"F 20.59.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-1/2"F INOX BI10-1/2"F 20.59Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-1/2"F INOX QTT10-1/2"F 20.60.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-1/2"F INOX BI12-1/2"F 20.600.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-1/2"F INOX 1/2"F-1/2"F 20.601.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"F INOX 1/2"M-1/2"F 20.602.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-3/8"F INOX 3/8"F-3/8"F 20.603.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/8"F INOX 3/8"M-3/8"F 020.60Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-1/2"F INOX QTT12-1/2"F 20.61.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-1/2"F INOX BI15-1/2"F 20.61Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-1/2"F INOX QTT15-1/2"F 20.62.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-3/4"F INOX BI15-3/4"F 20.621Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-3/4"F INOX QTT10-3/4"F 20.622Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-3/4"F INOX QTT12-3/4"F 20.625.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-3/4"F INOX BI12-3/4"F 20.62Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-3/4"F INOX QTT15-3/4"F 20.631Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-3/8"F INOX QTT14-3/8"F 20.633Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-1/2"FC+J INOX QTT14-1/2"FC+J 20.637.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN6 INOX 1/4"M-1/4"F INOX 1/4"M-1/4"F 20.63Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-1/2"F INOX QTT14-1/2"F 20.64.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-3/8"F INOX BI15-3/8"F 20.64Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-3/8"F INOX QTT15-3/8"F 20.65.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-3/8"M INOX BI12-3/8"M 20.65Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-3/8"M INOX QTT12-3/8"M 20.66.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-3/8"M INOX BI10-3/8"M 20.66Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-3/8"M INOX QTT10-3/8"M 20.67.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-1/2"M INOX BI10-1/2"M 20.67Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-1/2"M INOX QTT10-1/2"M 20.67R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-1/2"MR INOX BI10-1/2"MR 20.67RQ.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-1/2"MR INOX QTT10-1/2"MR 20.68.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-1/2"M INOX BI12-1/2"M 20.688.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-3/4M INOX BI12-3/4M 20.68Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-1/2"M INOX QTT12-1/2"M 20.68R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-1/2"MR INOX BI12-1/2"MR 20.68RQ.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-1/2"MR INOX QTT12-1/2"MR 20.69.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-1/2"M INOX BI15-1/2"M 20.691.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-3/4"M INOX BI15-3/4"M 20.699.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-3/8"M INOX BI15-3/8"M 20.699R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-1/2"MR INOX 1/2"MR-1/2"MR 20.69Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-1/2"M INOX QTT15-1/2"M 20.69R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-1/2"MR INOX BI15-1/2"MR 20.69RQ.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-1/2"MR INOX QTT15-1/2"MR 20.701Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-3/8"M INOX QTT14-3/8"M 20.70RQ.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-1/2"MR INOX QTT14-1/2"MR 20.71Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-QTT14 INOX QTT10-QTT14 20.72Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-QTT14 INOX QTT12-QTT14 20.73Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-QTT14 INOX QTT14-QTT14 20.74.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-BI10 INOX BI10-BI10 20.74Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-QTT10 INOX QTT10-QTT10 20.75.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-BI12 INOX BI10-BI12 20.75Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-QTT12 INOX QTT10-QTT12 20.76.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-BI15 INOX BI10-BI15 20.76Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-QTT15 INOX QTT10-QTT15 20.77.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-BI12 INOX BI12-BI12 20.77Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-QTT12 INOX QTT12-QTT12 20.78.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-BI15 INOX BI12-BI15 20.78Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-QTT15 INOX QTT12-QTT15 20.79.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-BI15 INOX BI15-BI15 20.799R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-1/4"M INOX 1/2"MR-1/4"M 20.79Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-QTT15 INOX QTT15-QTT15 20.79Q1.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-BI15 INOX TT15-BI15 20.80.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/8"FC INOX 3/8"M-3/8"FC 20.801.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-1/2"FC INOX 3/8"M-1/2"FC 20.81.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"FC INOX 1/2"M-1/2"FC 20.81R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-1/2"FC INOX 1/2"MR-1/2"FC 20.82.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/4"FC INOX 1/2"M-3/4"FC 20.82R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-3/4"FC INOX 1/2"MR-3/4"FC 20.83.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-1/2"FC INOX BI12-1/2"FC 20.833.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-3/4"FC INOX 1/4"M-3/4"FC 20.84.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/4"FC INOX 3/8"M-3/4"FC 20.85.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/8"FC INOX 1/2"M-3/8"FC 20.86.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-1/2"FC INOX 3/8"M-1/2"FC 20.866.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-3/8"FC INOX 1/2"F-3/8"FC 20.87.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-1/2"FC INOX 3/4"F-1/2"FC 20.88.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-3/4"FC INOX 3/8"F-3/4"FC 20.89.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-1/2"FC INOX 3/8"F-1/2"FC 20.90.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-3/8"FC INOX 3/8"F-3/8"FC 20.902.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-3/8"FC INOX 3/4"F-3/8"FC 20.90SF.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"SF-3/8"BSF INOX 3/8"SF-3/8"BSF 20.90SFXL.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"SF (XL)-3/8"BSF (XL) 3/8"SF (XL)-3/8"BSF (XL) 20.91.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-1/2"FC INOX 1/2"F-1/2"FC 20.911.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"F-3/8"FC INOX 1/4"F-3/8"FC 20.912SF.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"SF-3/8"SF INOX 1/4"SF-3/8"SF 20.913SF.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-3/8"SF INOX 1/4"M-3/8"SF 20.92.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F-3/4"FC INOX 1/2"F-3/4"FC 20.93.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-3/4"FC INOX 3/4"F-3/4"FC 20.933.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-3/4"FC INOX 3/4"M-3/4"FC 20.939_P0.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC-3/4"FC 0° INOX 3/4"FC-3/4"FC 20.94.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"FC-1/2"FC INOX 1/2"FC-1/2"FC 20.94R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-1/2"MR INOX 1/2"MR-1/2"MR 20.95.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC-1/2"FC INOX 3/4"FC-1/2"FC 20.95_0P.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC-1/2"FC 0° INOX 3/4"FC-1/2"FC 20.956_P0.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC-3/8"FC 0° INOX 3/4"FC-3/8"FC 20.96.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC-D10 INOX 3/8"FC-D10 20.966.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC - 3/4"F INOX 3/8"FC - 3/4"F 20.967.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC-D10 INOX 3/4"FC-D10 20.968.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC-D12 INOX 3/8"FC-D12 20.97.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-3/8"FC INOX BI10-3/8"FC 20.98.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F-1/2"FC INOX 3/4"F-1/2"FC 20.988_P0.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC-1/2"FC 0° INOX 3/4"FC-1/2"FC 20.99_P90.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC-3/8"FC 90° INOX 3/8"FC-3/8"FC 20.991.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-1/4"M INOX BI15-1/4"M 20.992.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-QTT10 INOX BI15-QTT10 20.996.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"F -BI12 L INOX 1/4"F -BI12 820.001.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F+J-D10 INOX 3/4"F+J-D10 820.01.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-D10 INOX 3/8"F+J-D10 820.011.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-D12 INOX 3/8"F+J-D12 820.012.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F+J-D12 INOX 1/2"F+J-D12 820.013.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-D15 INOX 3/8"F+J-D15 820.015.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F+J-D15 INOX 1/2"F+J-D15 820.02.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F+J-D10 INOX 1/2"F+J-D10 820.20.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-1/2"F+J INOX M10K-1/2"F+J 820.25.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-3/8"F+J INOX M10K-3/8"F+J 820.28.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-1/2"F+J INOX M10K-1/2"F+J 820.288.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M10K-3/4"F INOX M10K-3/4"F 820.30.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-3/8"F+J INOX M12K-3/8"F+J 820.31.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-1/2"F+J INOX M12K-1/2"F+J 820.312.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX M12K-1/2"FC+J INOX M12K-1/2"FC+J 820.32.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/8"F+J INOX 3/8"M-3/8"F+J 820.33.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-1/2"F+J INOX 3/8"M-1/2"F+J 820.333.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/4"F+J INOX 3/8"M-3/4"F+J 820.34.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/8"F+J INOX 1/2"M-3/8"F+J 820.341.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-3/8"F+J INOX - 1/2"M-3/8"F+J 820.343.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"M-3/4"F INOX 1/4"M-3/4"F 820.34R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-3/8"F+J INOX 1/2"MR-3/8"F+J 820.35.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"F+J INOX 1/2"M-1/2"F+J 820.355.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"F+J INOX 1/2"M-1/2"F+J 820.355GRIP.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX GRIP14(1/2"M)-1/2"F + J INOX GRIP14(1/2"M)-1/2"F+J 820.35R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-1/2"F+J INOX 1/2"MR-1/2"F+J 820.36.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/4"F+J INOX 1/2"M-3/4"F+J 820.36R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"MR-3/4"F+J INOX 1/2"MR-3/4"F+J 820.38.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-3/4"F+J INOX 3/4"M-3/4"F+J 820.389.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F-3/4"M INOX 3/8"F-3/4"M 820.39.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-1/2"F+J INOX 3/4"M-1/2"F+J 820.41.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"F-1/2"F+J INOX 1/4"F-1/2"F+J 820.414.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/4"F-3/4"F + J INOX 1/4"F-3/4"F+J 820.42.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-3/8"F+J INOX 3/8"F+J-3/8"F+J 820.42S.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"SF-3/8"F+J INOX 3/8"SF-3/8"F+J 820.43.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-1/2"F+J INOX 3/8"F+J-1/2"F+J 820.44.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F+J-1/2"F+J INOX 1/2"F+J-1/2"F+J 820.45.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX SUPERFLEX INOX 20 1/2"F+J -3/4"F+J 1/2"F+J-3/4"F+J 820.46.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX PEX DN8 INOX 3/4"F+J-3/4"F+J INOX 3/4"F+J-3/4"F+J 820.47.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-3/4"F+J INOX 3/8"F+J-3/4"F+J 820.57.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-3/8"F+J INOX BI12-3/8"F+J 820.57Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-3/8"F+J INOX QTT12-3/8"F+J 820.58.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-3/8"F+J INOX BI10-3/8"F+J 820.58Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-3/8"F+J INOX QTT10-3/8"F+J 820.59.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-1/2"F+J INOX BI10-1/2"F+J 820.591.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10(3D)-1/2"F+J INOX BI10(3D)-1/2"F+J 820.59Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT10-1/2"F+J INOX QTT10-1/2"F+J 820.60.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-1/2"F+J INOX BI12-1/2"F+J 820.60Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-1/2"F+J INOX QTT12-1/2"F+J 820.61.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-1/2"F+J INOX BI15-1/2"F+J 820.61Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-1/2"F+J INOX QTT15-1/2"F+J 820.62.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-3/4"F+J INOX BI15-3/4"F+J 820.625Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT12-3/4"F INOX QTT12-3/4"F 820.631Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-3/8"F+J INOX QTT14-3/8"F+J 820.63Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT14-1/2"F+J INOX QTT14-1/2"F+J 820.64.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI15-3/8"F+J INOX BI15-3/8"F+J 820.64Q.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX QTT15-3/8"F+J INOX QTT15-3/8"F+J 820.80.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"M-3/8"FC+J INOX 3/8"M-3/8"FC+J 820.81.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-1/2"FC+J INOX 1/2"M-1/2"FC+J 820.82.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/4"FC+J INOX 1/2"M-3/4"FC+J 820.83.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI12-1/2"FC+J INOX BI12-1/2"FC+J 820.85.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"M-3/8"FC+J INOX 1/2"M-3/8"FC+J 820.866.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F+J-3/8"FC INOX 1/2"F+J-3/8"FC 820.866R.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F ROT-3/8"FC+J INOX 1/2"F ROT-3/8"FC+J 820.88.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-3/4"FC INOX 3/8"F+J-3/4"FC 820.88.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-3/4"FC INOX 3/8"F+J-3/4"FC 820.89.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-1/2"FC+J INOX 3/8"F+J-1/2"FC+J 820.90.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"F+J-3/8"FC+J INOX 3/8"F+J-3/8"FC+J 820.901SF.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F+J-3/8"BSF INOX 3/4"F+J-3/8"BSF 820.91.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"F+J-1/2"FC+J INOX 1/2"F+J-1/2"FC+J 820.92.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F+J-1/2"FC INOX 3/4"F+J-1/2"FC 820.93.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F + J - 3/4"FC INOX 3/4"F+J-3/4"FC 820.933.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"M-3/4"FC+J INOX 3/4"M-3/4"FC+J 820.939_P180.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC-3/4"FC 180° INOX 3/4"FC- 3/4"FC 820.94_P0.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"FC-1/2"FC 0° INOX 1/2"FC-1/2"FC 820.94_P225.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"FC-1/2"FC 225° INOX 1/2"FC-1/2"FC 820.95_P0.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"FC+J-1/2"FC+J 0° INOX 3/4"FC+J-1/2"FC+J 820.961.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 1/2"FC+J-D10 INOX 1/2"FC+J-D10 820.966.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC-3/4"F+J INOX 3/8"FC-3/4"F+J 820.98.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/4"F+J-1/2"FC INOX 3/4"F+J-1/2"FC 820.981.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX BI10-3/4"FC+J INOX BI10-3/4"FC+J 820.99.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC+J-3/8"FC+J INOX 3/8"FC+J-3/8"FC+J 820.99_P0.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC+J-3/8"FC+J INOX 3/8"FC+J-3/8"FC+J 820.99_P180.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC+J-3/8"FC+J INOX 3/8"FC+J-3/8"FC+J 820.995_P0.XXXX.W DN8 THINK-A-FLEX THINK-A-FLEX EPDM DN8 INOX 3/8"FC+J-1/2"FC+J 0° INOX 3/8"FC+J-1/2"FC+J 20.1032.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-3/8"F INOX 3/8"M-3/8"F 20.10322.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-3/8"M INOX 3/8"M-3/8"M 20.1033.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-1/2"F INOX 3/8"M-1/2"F 20.10333.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-3/4"F INOX 3/8"M-3/4"F 20.1034.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/8"F INOX 1/2"M-3/8"F 20.1034R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-3/8"F INOX 1/2"MR-3/8"F 20.1035.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-1/2"F INOX 1/2"M-1/2"F 20.1035R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-1/2"F INOX 1/2"MR-1/2"F 20.1036.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/4"F INOX 1/2"M-3/4"F 20.1036R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-3/4"F INOX 1/2"MR-3/4"F 20.1037.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"M-3/4"F INOX 3/4"M-3/4"F 20.1038.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"M-3/4"F INOX 3/4"M-3/4"F 20.10389.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-3/4"M INOX 3/8"F-3/4"M 20.1038C.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"M CON-3/4"F INOX 3/4"M CON-3/4"F 20.10400.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INXO 1/2"M - 1/2"M INOX 1/2"M - 1/2"M 20.10400R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INXO 1/2"MR - 1/2"MR INOX 1/2"MR - 1/2"MR 20.10401R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-1/2"MR INOX 1/2"M-1/2"MR 20.1042.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-3/8"F INOX 3/8"F-3/8"F 20.1043.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-1/2"F INOX 3/8"F-1/2"F 20.1044.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F-1/2"F INOX 1/2"F-1/2"F 20.1045.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F-3/4"F INOX 1/2"F-3/4"F 20.1046.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F-3/4"F INOX 3/4"F-3/4"F 20.1047.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-3/4"F INOX 3/8"F-3/4"F 20.1058.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-3/8"F INOX BI10-3/8"F 20.1059.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-1/2"F INOX BI10-1/2"F 20.1061.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI15-1/2"F INOX BI15-1/2"F 20.1064.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI15-3/8"M INOX BI15-3/8"M 20.1066.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-3/8"M INOX BI10-3/8"M 20.1067.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-1/2"M INOX BI10-1/2"M 20.1067R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-1/2"MR INOX BI10-1/2"MR 20.1074.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-BI10 INOX BI10-BI10 20.1079.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI15-BI15 INOX BI15-BI15 20.1080.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-3/8"FC INOX 3/8"M-3/8"FC 20.1081.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-1/2"FC INOX 1/2"M-1/2"FC 20.1081R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-1/2"FC INOX 2"MR-1/2"FC 20.1082.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/4"FC INOX 1/2"M-3/4"FC 20.1082R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-3/4"FC INOX 1/2"MR-3/4"FC 20.1084.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-3/8"FC INOX /8"M-3/8"FC 20.1085.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/8"FC INOX 1/2"M-3/8"FC 20.1086.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-1/2"FC INOX /8"M-1/2"FC 20.1088.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-3/4"FC INOX 3/8"F-3/4"FC 20.1089.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-1/2"FC INOX 3/8"F-1/2"FC 20.1090.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-3/8"FC INOX 3/8"F-3/8"FC 20.10901.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F-3/8"FC INOX 3/4"F-3/8"FC 20.10902.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/8"FC INOX 1/2"M-3/8"FC 20.1091.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F-1/2"FC INOX 1/2"F-1/2"FC 20.10910.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F-1/2"FC INOX 3/8"F-1/2"FC 20.1092.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F-3/4"FC INOX 1/2"F-3/4"FC 20.1093.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F-3/4"FC INOX 3/4"F-3/4"FC 20.10939_P0.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"FC-3/4"FC INOX 3/4"FC-3/4"FC 20.1094.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F-1/2"FC INOX 3/4"F-1/2"FC 20.1095_P0.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"FC-1/2"FC INOX 3/4"FC-1/2"FC 20.1096.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-1/2"M INOX 1/2"M-1/2"M 20.1096R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-1/2"MR INOX 1/2"MR-1/2"MR 20.1097.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-3/8"FC INOX BI10-3/8"FC 20.1098.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"FC-3/4"F INOX 1/2"FC-3/4"F 20.10990_P0.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"FC-1/2"FC 0° INOX 1/2"FC-1/2"FC 20.10993.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"FC -3/4"FC INOX 3/4"FC -3/4"FC 20.10999_P0.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"FC-3/8"FC 0° INOX 3/8"FC-3/8"FC 820.1032.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-3/8"F+J INOX 3/8"M-3/8"F+J 820.1033.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-1/2"F+J INOX 3/8"M-1/2"F+J 820.1034.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/8"F+J INOX 1/2"M-3/8"F+J 820.1034R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-3/8"F INOX 1/2"MR-3/8"F 820.1035.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-1/2"F+J INOX 1/2"M-1/2"F+J 820.1035R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-1/2"F+J INOX 1/2"MR-1/2"F+J 820.1036.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/4"F + J INOX 1/2"M-3/4"F+J 820.1037.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"M-1/2"F+J INOX 3/4"M-1/2"F+J 820.1037R.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"MR-3/8"FC+J INOX 1/2"MR-3/8"FC+J 820.1038.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"M-3/4"F+J INOX 3/4"M-3/4"F+J 820.1038CH.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"M CON-3/4"F+J 3/4"M CON-3/4"F+J 820.1042.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F+J-3/8"F+J INOX 3/8"F+J-3/8"F+J 820.1043.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F+J - 1/2"F+J INOX 3/8"F+J - 1/2"F+J 820.1044.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM-WRAS DN10 INOX 1/2"F+J-1/2"F+J INOX 1/2"F+J- 1/2"F+J 820.1044S.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"SF-1/2"SF INOX 1/2"SF-1/2"SF 820.1045.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F+J-3/4"F+J INOX 1/2"F+J-3/4"F+J 820.1046.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F + J - 3/4"F + J INOX 3/4"F+J- 3/4"F+J 820.1047.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F+J-3/4"F+J INOX 3/8"F+J-3/4"F+J 820.1058.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-3/8"F+J INOX BI10-3/8"F+J 820.1059.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI10-1/2"F+J INOX BI10-1/2"F+J 820.1061.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI15-1/2"F+J INOX BI15-1/2"F+J 820.1061IRL.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI1/2 (14,7mm)-1/2"F+J INOX BI1/2 (14,7mm)-1/2"F+J 820.1062.XXXX.W DN10 CREATE-A-FLEX CREATE-A-FLEX EPDM- DN10 INOX BI15-3/4"F+J INOX BI15-3/4"F+J 820.1063.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX BI15-3/8"F+J INOX BI15-3/8"F+J 820.1080.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"M-3/8"FC INOX 3/8"M-3/8"FC 820.1081.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-1/2"FC+J INOX 1/2"M-1/2"FC+J 820.1082.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/4"FC+J INOX 1/2"M-3/4"FC+J 820.1085.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"M-3/8"FC+J INOX 1/2"M-3/8"FC+J 820.10866.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F+J-3/8"FC INOX 1/2"F+J-3/8"FC 820.1088P.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F+J-3/4"FC KUNSTSTOF INOX 3/8"F+J- 3/4"FC 820.1090.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/8"F+J-3/8"FC INOX 3/8"F+J-3/8"FC 820.10901.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F+J-3/8"FC+J INOX 3/4"F+J-3/8"FC+J 820.10901P.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F+J (KUNSTSTOF)-3/8"FC+J INOX 3/4"F+J (KUNSTSTOF)-3/8"FC+J 820.1091.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F+J-1/2"FC INOX 1/2"F+J-1/2"FC 820.1092.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F+J - 3/4"FC INOX 1/2"F+J-3/4"FC 820.1092P.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 1/2"F+J - (3/4"FC+J-KUNSTSTOF) INOX 1/2"F+J-(3/4"FC+J-KUNSTSTOF) 820.1093.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F+J-3/4"FC INOX 3/4"F+J-3/4"FC 820.1094.XXXX.W DN10 THINK-A-FLEX THINK-A-FLEX EPDM DN10 INOX 3/4"F+J-3/4"FC+J INOX 3/4"F+J-3/4"FC+J 25.01.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-1/2"F INOX 1/2"M - 1/2"F 25.01C.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M CON - 1/2"F INOX 1/2"M CON - 1/2"F 25.01S.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-1/2"SF INOX 1/2"M - 1/2"SF 25.01SC.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M CON- 1/2"SF INOX 1/2"M CON - 1/2"SF 25.02.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-3/4"F INOX 1/2"M - 3/4"F 25.02C.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M CONISCH-3/4"F INOX 1/2"M CON - 3/4"F 25.03.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-1/2"F INOX 3/4"M - 1/2"F 25.03B.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M(BI16)-1/2"F 3/4"M + BI16 - 1/2"F 25.04.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-3/4"F INOX 3/4"M - 3/4"F 25.04B.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M(BI16)-3/4"F 3/4"M + BI16 - 3/4"F 25.13.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-1/2"F 1/2"F - 1/2"F 25.13F.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-1/2"F VAST INOX 1/2"F - 1/2"F vast 25.13S.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"SF-1/2"SF INOX 1/2"SF - 1/2"SF 25.13S1.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM-WRAS DN13 INOX 1/2"F-1/2"SF INOX 1/2"F - 1/2'SF 25.13SF.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"SF-1/2"SF INOX 1/2"SF - 1/2"SF 25.14.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-3/4"F INOX 1/2"F - 3/4"F 25.15.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-3/4"F INOX 3/4"F - 3/4"F 25.152.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-D15 INOX 1/2"M - D15 25.15R.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-3/4"R INOX 3/4"F - 3/4"R 25.25.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-1/2"M INOX 1/2"M - 1/2"M 25.251.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-3/4"M 1/2"M - 3/4"M 25.252.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-3/4"M INOX 3/4"M - 3/4"M 25.25C.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M CON-1/2"M CON INOX 1/2"M CON - 1/2"M CON 25.26B.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M(BI16)-3/4"M(BI16) 3/4"M + BI16 - 3/4"M + BI16 25.27.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-3/4"M 1/2"M - 3/4"M 25.33.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-3/4"R INOX 1/2"F - 3/4"R 25.333.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-1/2"R INOX 1/2"F - 1/2"R 25.34.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-3/4"R INOX 1/2"M - 3/4"R 25.35.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-1/2"R INOX 1/2"M - 1/2"R 25.36.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"R-1/2"R INOX 1/2"R - 1/2"R 25.37.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"R-1/2"FC INOX 1/2"R - 1/2"FC 25.38.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-3/4"R INOX 3/4"F - 3/4"R 25.39.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-3/4"R INOX 3/4"M - 3/4"R 25.51Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT14-1/2"F INOX QTT14 - 1/2"F 25.52.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-1/2"F INOX BI15 - 1/2"F 25.521Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT14-3/4"F INOX QTT14 - 3/4"F 25.522Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-1/2"F INOX QTT12 - 1/2"F 25.52Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT15-1/2"F INOX QTT15 - 1/2"F 25.53.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-3/4"F INOX BI15 - 3/4"F 25.532Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-3/4"F INOX QTT12 - 3/4"F 25.53Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT15-3/4"F INOX QTT15 - 3/4"F 25.54.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-1/2"M INOX BI15 - 1/2"M 25.542Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-1/2"M INOX QTT12 - 1/2"M 25.54C.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-1/2"M CON INOX BI15 - 1/2"M CON 25.54Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT15-1/2"M INOX QTT15 - 1/2" M 25.55.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-3/4"M INOX BI15 - 3/4"M 25.552Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-3/4"M INOX QTT12 - 3/4"M 25.55Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT15-3/4"M INOX QTT15 - 3/4"M 25.56.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-1/2"FC INOX BI15 - 1/2"FC 25.562Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-1/2"FC INOX QTT12 - 1/2"FC 25.56Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT15-1/2"FC INOX QTT15 - 1/2"FC 25.56QP.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QP15-1/2"FC INOX QP15 - 1/2"FC 25.57.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-3/4"FC INOX BI15 - 3/4"FC 25.572Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-3/4"FC INOX QTT12 - 3/4"FC 25.57Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT15-3/4"FC INOX QTT15 - 3/4"FC 25.58.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-BI15 INOX BI15 - BI15 25.582Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-QTT12 INOX QTT12 - QTT12 25.58Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT15-QTT15 INOX QTT15 - QTT15 25.58QP.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QP15 - QP15 INOX QP15 - QP15 25.59.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI16-1/2"F INOX BI16 - 1/2"F 25.595QP.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QP22 - QP22 INOX QP22 - QP22 25.60Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT14-1/2"M QTT14 - 1/2"M 25.61.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI16-1/2"M INOX BI16 - 1/2"M 25.62Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT14-QTT14 INOX QTT14 - QTT14 25.63.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI16-BI16 INOX BI16 - BI16 25.66.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM-WRAS DN13 INOX BI22-BI22 INOX BI22 - BI22 25.70.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-1/2"FC INOX 1/2"F - 1/2"FC 25.71.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-3/4"FC INOX 1/2"F - 3/4"FC 25.72.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-1/2"FC INOX 3/4"F - 1/2"FC 25.73.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-3/4"FC INOX 3/4"F - 3/4"FC 25.739.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"FC-3/4"FC INOX 3/4"FC - 3/4"FC 25.739_P0.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"FC-3/4"FC INOX 3/4"FC - 3/4"FC 25.739_P180.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"FC-3/4"FC 180° INOX 3/4"FC - 3/4"FC 25.73H.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-3/4"FC INOX 3/4"F - 3/4"FC 25.85.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-1/2"FC INOX 1/2"M - 1/2"FC 25.85C.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M CON-1/2"FC INOX 1/2"M CON - 1/2"FC 25.85I.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX (1/2"M INOX)-1/2"FC INOX 1/2"M Inox - 1/2"FC 25.86.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-3/4"FC INOX 1/2"M - 3/4"FC 25.87.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-1/2"FC INOX 3/4"M - 1/2"FC 25.88.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-3/4"FC 3/4"M - 3/4"FC 25.959.XXXX.W DN13 CREATE-A-FLEX CREATE-A-FLEX EPDM DN13 INOX BI15-D15 INOX BI15 - D15 25.97_P0.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-3/4"FC INOX 0° 1/2"FC - 3/4"FC 25.98_P0.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-1/2"FC 0° 1/2"FC - 1/2"FC 25.98_P145.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-1/2"FC 145° INOX 1/2"FC - 1/2"FC 25.98_P180.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-1/2"FC 180° INOX 1/2"FC - 1/2"FC 25.98_P325.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-1/2"FC 325° INOX 1/2"FC - 1/2"FC 25.98_P35.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-1/2"FC 35° INOX 1/2"FC - 1/2"FC 25.985.XXXX.W DN13 CREATE-A-FLEX CREATE-A-FLEX EPDM DN13 INOX BI15-D15 INOX BI15 - D15 25.985QP.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QP15-D15 INOX QP15 - D15 25.986.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-D15 INOX 3/4"F - D15 25.987.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F-D15 INOX 1/2"F - D15 25.988.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-3/4"FC INOX 1/2"FC - 3/4"FC 25.988_P0.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-3/4"FC 0° INOX 1/2"FC - 3/4"FC 25.988_P90.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"FC-3/4"FC 90° INOX 1/2"FC - 3/4"FC 25.989.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-D15 INOX 1/2"M - D15 25.991_P0.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"FC-3/4"FC 0° INOX 3/4"FC - 3/4"FC 25.991_P90.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"FC-3/4"FC 90° INOX 3/4"FC - 3/4"FC 25.992.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX D15-D15 INOX D15 - D15 25.SISA.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX SUPERFLEX 25 1/2"M-inox huls 1/2"M - 1/2"M 25.SISA-BIS.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX SUPERFLEX 25 1/2"F-NIETS 1/2"F 825.01.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-1/2"F+J INOX 1/2"M-1/2"F+j 825.01C.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M CON - 1/2"F INOX 1/2"M CON – 1/2"F 825.02.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"M-3/4"F+J INOX 1/2"M-3/4"F+J 825.03.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-1/2"F+J INOX 3/4"M-1/2"F+J 825.03B.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M(BI16)-1/2"F+J INOX 3/4"M(BI16)- 1/2"F+ 825.04.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M-3/4"F+J INOX 3/4"M-3/4"F+J 825.04B.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"M(BI16)-3/4"F+J INOX 3/4"M(BI16)- 3/4"F+J 825.13.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F+J-1/2"F+J INOX 1/2"F+J-1/2"F+J 825.14.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F+J-3/4"F+J INOX 1/2"F+J-3/4"F+J 825.15.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F+J-3/4"F+J INOX 3/4"F+J-3/4"F+J 825.42.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F+J-D15 INOX 1/2"F+J-D15 825.51Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT14-1/2"F+J INOX QTT14-1/2"F+J 825.52.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-1/2"F+J INOX BI15-1/2"F+J 825.522Q.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QTT12-1/2"F+J INOX QTT12-1/2"F+J 825.52QP.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QP15 - 1/2"F+J INOX QP15 - 1/2"F+J 825.53.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI15-3/4"F+J INOX BI15-3/4"F+J 825.53QP.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QP15 - 3/4"F+J INOX QP15 - 3/4"F+J 825.594.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX BI22-3/4"F+J INOX BI22-3/4"F+J 825.594QP.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX QP22 - 3/4"F+J INOX QP22 - 3/4"F+J 825.70.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F+J-1/2"FC INOX 1/2"F+J-1/2"FC 825.71.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F+J-3/4"FC INOX 1/2"F+J-3/4"FC 825.72.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F+J-1/2"FC INOX 3/4"F+J-1/2"FC 825.73.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F+J-3/4"FC INOX 3/4"F+J-3/4"FC 825.73P.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 3/4"F-3/4"FC INOX 3/4"F-3/4"FC 825.987.XXXX.W DN13 THINK-A-FLEX THINK-A-FLEX EPDM DN13 INOX 1/2"F+J-D15 INOX 1/2"F+J-D15 25.05.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-3/4"F INOX 3/4"M - 3/4"F 25.0522.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-D22 INOX 3/4"M - D22 25.05C.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M CONISCH - 3/4"F INOX 3/4"M CON – 3/4"F 25.05CSF.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M CONISCH - 3/4"SF SFERISCH INOX 3/4"M CON - 3/4"SF 25.05SF.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-3/4"SF INOX 3/4"M - 3/4"SF 25.06.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-4/4"F INOX 3/4"M - 4/4"F 25.07.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"M-3/4"F INOX 4/4"M - 3/4"F 25.08.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"M-4/4"F INOX 4/4"M - 4/4"F 25.16.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-3/4"F INOX 3/4"F - 3/4"F 25.1622.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-D22 INOX 3/4"F - D22 25.16P.XXXX.W DN20 CREATE-A-FLEX CREATE-A-FLEX EPDM DN20 INOX 3/4"F-3/4"F INOX *** MET ZWARTE KUNSTSTOF KOPPELINGEN *** 3/4"F P - 3/4"F P 25.16SF.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"SF-3/4"SF INOX 3/4"SF - 3/4"SF 25.16SF1.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-3/4"SF INOX 3/4"F - 3/4"SF 25.17.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-4/4"F INOX 3/4"F - 4/4"F 25.18.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"F-4/4"F INOX 4/4"F - 4/4"F 25.1822.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"F-D22 INOX 4/4"F - D22 25.2022.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX D22-D22 INOX D22 - D22 25.26.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-3/4"M INOX 3/4"M - 3/4"M 25.265.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-4/4"M INOX 3/4"M - 4/4"M 25.266.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-3/4"M INOX BI22 - 3/4"M 25.266C.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-3/4"M CON INOX BI22 -3/4"M CON 25.267.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-4/4"M INOX BI22 - 4/4"M 25.26C.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M CON - 3/4"M CON INOX 3/4"M CON – 3/4"M CON 25.26C1.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M CON - 3/4"M INOX 3/4"M CON - 3/4"M 25.28.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"M-3/4"M 4/4"M - 3/4"M 25.288.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM-WRAS DN20 INOX 4/4"M-4/4"M INOX 4/4"M - 4/4"M 25.40.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-3/4"R INOX 3/4"M - 3/4"R 25.405.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"R - 4/4"M INOX 3/4"R - 4/4"M 25.41.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"R-3/4"FC INOX 3/4"R - 3/4"FC 25.555.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-3/4"F INOX BI22 - 3/4"F 25.556.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-4/4"F INOX BI22 - 4/4"F 25.67.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-BI22 INOX BI22 - BI22 25.76.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-3/4"FC INOX 3/4"F - 3/4"FC 25.76H.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-3/4"FC INOX 3/4"F - 3/4"FC 25.76P.XXXX.W DN20 CREATE-A-FLEX CREATE-A-FLEX EPDM DN20 INOX 3/4"F-3/4"FC INOX 3/4"F P – 3/4"FC P 25.77.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-4/4"FC INOX 3/4"F - 4/4"FC 25.777_P0.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-4/4" INOX 3/4"FC - 4/4"FC 25.777_P180.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-4/4"FC 180° INOX 3/4"FC – 4/4"FC 25.78.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"F-3/4"FC INOX 4/4"F - 3/4"FC 25.79.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"F-4/4"FC INOX 4/4"F - 4/4"FC 25.799_P0.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM-WRAS DN20 INOX 4/4"FC-4/4"FC INOX 0° 4/4"FC - 4/4"FC 25.799_P180.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"FC-4/4"FC INOX 180° 4/4"FC - 4/4"FC 25.799_P60.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"FC-4/4"FC INOX 60° 4/4"FC - 4/4"FC 25.90.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-3/4"FC INOX 3/4"M - 3/4"FC 25.901.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-3/4"FC INOX BI22 - 3/4"FC 25.902.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-3/4"F INOX BI22 - 3/4"F 25.903.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-4/4"FC INOX BI22 - 4/4"FC 25.91.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"M-4/4"FC INOX 3/4"M - 4/4"FC 25.9122.XXXX.W DN20 CREATE-A-FLEX CREATE-A-FLEX EPDM DN20 INOX 4/4"FC-D22 (GLAD) INOX 4/4"FC - D22 25.92.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"M-3/4"FC INOX 4/4"M - 3/4"FC 25.93.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4"M-4/4"FC INOX 4/4"M - 4/4"FC 25.99.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-3/4"FC INOX 3/4"FC - 3/4"FC 25.99_P0.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-3/4"FC 0° INOX 3/4"FC - 3/4"FC 25.99_P180.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-3/4"FC 180° INOX 3/4"FC - 3/4"FC 25.99_P270.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-3/4"FC 270° INOX 3/4"FC - 3/4"FC 25.99_P90.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-3/4"FC 90° INOX 3/4"FC - 3/4"FC 25.994.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX BI22-D22 INOX BI22 - D22 25.999.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"F-4/4"FC INOX 3/4"F - 4/4"FC 25.99H_P0.XXXX.W DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 3/4"FC-3/4"FC INOX 0° 3/4"FC - 3/4"FC 181117.001 DN20 THINK-A-FLEX SLANG EPDM INOX-ROOD 3/4"F - SISA BOCHT INOX 3/4"F - Snelkoppeling bocht Sisa 181117.002 DN20 THINK-A-FLEX SLANG EPDM INOX- BLAUW 3/4"F - SISA BOCHT INOX 3/4"F - Snelkoppeling bocht Sisa 100180.003 DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 INOX 4/4FC-D22 INOX 4/4FC-D22 25.SUKO20.05.XXXX DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 SUKO20-3/4"F SUKO20-3/4"F 25.SUKO25.09.XXXX DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN25 SUKO25-4/5"F SUKO25-4/5"F 122144.01* DN20 THINK-A-FLEX THINK-A-FLEX EPDM DN20 3/4"F-ECO35 INOX 3/4"F-ECO35 25.09.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M-4/4"F INOX 4/4"M - 4/4"F 25.09C.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M CONISCH - 4/4"F INOX 4/4"M CON - 4/4"F 25.09R.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M-4/4"MR INOX L600 4/4"M - 4/4"F + nippel 25.09XL.XXXX.W DN25 CREATE-A-FLEX CREATE-A-FLEX EPDM DN25 INOX 4/4"M EXTRA LANG - 4/4"F INOX 4/4"M XL - 4/4"F 25.10.XXXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M-5/4"F INOX 4/4"M - 5/4"F 25.19.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"F-4/4"F INOX 4/4"F - 4/4"F 25.19R.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"R-4/4"R INOX 4/4"R - 4/4"R 25.20.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"F-5/4"F INOX 4/4"F - 5/4"F 25.21.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 5/4"F-5/4"F INOX 5/4"F - 5/4"F 25.29.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M-4/4"M INOX 4/4"M - 4/4"M 25.299XL.XXXX.W DN25 CREATE-A-FLEX CREATE-A-FLEX EPDM DN25 INOX 4/4"M EXTRA LANG - 4/4"M STANDARD INOX 4/4"M XL - 4/4"M 25.29C.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M CON - 4/4"M CON INOX 4/4"M CON - 4/4"M CON 25.29XL.XXXX.W DN25 CREATE-A-FLEX CREATE-A-FLEX EPDM DN25 INOX 4/4"M EXTRA LANG - 4/4"M XL INOX 4/4"M XL - 4/4"M XL 25.43.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M -4/4"R INOX 4/4"M - 4/4"R 25.44.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"R-4/4"FC INOX 4/4"R - 4/4"FC 25.81.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"F-4/4"FC INOX 4/4"F - 4/4"FC 25.812_P0.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC-4/4"FC 0° INOX 4/4"FC - 4/4"FC 25.812_P180.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC-4/4"FC 180°C 4/4"FC - 4/4"FC 25.812_P90.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC-4/4"FC 90° 4/4"FC - 4/4"FC 25.812R.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC + nippel - 4/4"FC + nippel 4/4"FC – 4/4"FC + nippel 25.813_P0.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC-4/4"FC 0° INOX 4/4"FC - 4/4"F 25.81I.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"F-4/4"FC INOX 4/4"F - 4/4"FC 25.81R.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC-4/4"MR INOX-FF 4/4"FC - 4/4"FC + nippel 25.82.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"F-5/4"FC INOX 4/4"F - 5/4"FC 25.821_P0.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC-5/4"FC 0° INOX 4/4"FC - 5/4"FC 25.83.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 5/4"F-5/4"FC INOX 5/4"F - 5/4"FC 25.831.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 5/4"R-5/4"FC INOX 5/4"F - 5/4"FC + nippel 25.84.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"FC-5/4"F INOX 4/4"FC - 5/4"F 25.95.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M-4/4"FC INOX 4/4"M - 4/4"FC 25.95C.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M CONISCH -4/4"FC INOX 4/4"M CON – 4/4"FC 25.95XL.XXXX.W DN25 CREATE-A-FLEX CREATE-A-FLEX EPDM DN25 INOX 4/4"M EXTRA LANG - 4/4"FC INOX 4/4"M XL - 4/4"FC 25.96.XXXX.W DN25 THINK-A-FLEX THINK-A-FLEX EPDM DN25 INOX 4/4"M-5/4"FC INOX 4/4"M - 5/4"FC

Approval Holder:: FixaFlex

Company Name
FixaFlex
Address
Kasteelstraat 15 Geluveld
Postcode
8980
Country
Belgium
Phone
+32 476 37 19 22
General Email
nancy.decuypere@fixaflex.com

View All Listings by this Company

WRAS Approval Number: #251204020

Range of stainless steel braided silicone lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 251204020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Lux, D.o.M. (YY or MMYY, WWYY), PN, DN, temp, WRAS on crimped connector.
Installation Requirements:: R008
Expiry date:: 31/12/2030
Model:: DN6 Male 3/8 BSP Male 3/8 BSP swivel Male 1/2 BSP Male 1/2 NPSM Male M8 cyl. Male M8 cyl. medium Male M8 cyl. long Male M8 hexag. Male M8 hexag.medium Male M10 poly. Male M10. hexag. Male M10. hexag. medium Male M10 hexag. long Male M10 (P.I.) Male M11 Male M15 swivel Female 3/8 BSP Female 3/8 BSP w/gasket (H.N.) Female 3/8 BSP w/gasket Female 1/2 BSP Female 1/2 BSP w/gasket Female 9/16 w/gasket Female M10 Female M15 Female M15 w/gasket Plug in straight Ø10 mm Plug in straight Ø10 mm w/recess Plug in straight w/2 O-rings Plug in straight w/O-ring (F.I.) DN8 Male 3/8 BSP Male 3/8 BSP swivel Male 1/2 BSP Male 1/2 BSP swivel Male 3/4 BSP Male 1/8 NPSM Male M10 poly. Male M10. hexag. Male M10. hexag. medium Male M10 hexag. long Male M10 (H.N.) Male M11 Male M12 Male M12 hexag. medium Male M12 (P.I.) Male M15 swivel Male M10 (C.S.) Female 3/8 BSP Female 3/8 BSP (G.B.) Female 3/8 BSP d.6,6 (G.B.) Female 3/8 BSP w/gasket Female 3/8 BSP w/O-ring (G.B.) Female 3/8 w/O-ring (V.I.) Female (Plastic) 3/8 w/O-ring (V.I.) Female 1/2 BSP Female 1/2 BSP w/gasket Female 1/2 BSP w/O-ring (G.B.) Female 1/2 NPSM Female 3/4 BSP Female 3/4 BSP w/gasket Female 9/16 w/gasket Female M15 Female elbow 3/8 BSP Female elbow 3/8 BSP w/gasket Female elbow 3/8 BSP (G.B.) Female elbow 3/8 BSP H 29,5 mm (G.B.) Female elbow 3/8 BSP H 29,5 mm (V.I.) Female elbow (Plastic) 5/8 w/O-ring (V.I.) Female elbow 1/2 BSP Female elbow 1/2 BSP w/gasket Female elbow 1/4 BSP Female elbow 3/4 BSP Female elbow 3/4 BSP w/gasket Plug in straight Ø10 mm Plug in straight Ø10 mm w/recess Plug in straight w/2 O-rings Compression Ø 10 mm (for use with copper pipe) Compression Ø 15 mm (for use with copper pipe) DN13 Male 1/2 BSP Male 1/2 BSP (H.N.) Male 1/2 BSP (D.B.) Male 1/2 BSP 32 mm (H.N.) Male 1/2 NPT (H.N.) Male 1/2 taper (H.N.) Male 3/4 BSP Female 3/8 BSP Female 1/2 BSP Female 1/2 BSP w/gasket Female 1/2 BSP w/O-ring (G.B.) Female 1/2 BSP w/O-ring (H.N.) Female 3/4 BSP Female 3/4 BSP w/gasket Female 3/4 BSP w/2 O-rings (H.N.) Female elbow 3/8 BSP Female elbow 1/2 BSP Female elbow 1/2 BSP w/gasket Female elbow 1/2 BSP w/O-ring (H.N.) Female elbow 3/4 BSP Female elbow 3/4 BSP w/gasket Female elbow 3/4 BSP w/2 O-rings (H.N.) Plug in straight Ø15 mm (A.T.) Plug in straight plug-in (A.T.) Plug in straight plug-in w/o-ring (A.T.) Plug in elbow pipe w/2 O-rings (A.T.) Compression Ø 15 mm (for use with copper pipe) DN18 Male 3/4 BSP Male 1" BSP Female 3/4 BSP Female 1" BSP Female elbow 3/4 BSP Female elbow 1" BSP Plug in straight pipe (22mm)

Approval Holder:: LUXOR S.p.A.

Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company

WRAS Approval Number: #251202718

Range of gas fired, unvented hot water storage heaters. The DHW circuit consists of a temperature and pressure relief valve (set at 7.0Bar). Maximum working pressure: 6.5 Bar. Maximum operating temperature: 85°C.

Section:: 1890 Unvented Heating Apparatus
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models belo
Marking:: Adveco Logo, Rheem sales company, Serial number, manufacture date(DD.MM.YYYY), Capacity, pressure and other technical information on adhesive label.
Installation Requirements:: R001 R140 R360
Expiry date:: 31/12/2030
Model:: GHE22-190 ASTUTE (¾” NPT-M to ¾” BSPT-F adapter) GHE28-190 ASTUTE (¾” NPT-M to ¾” BSPT-F adapter) GHE28-284 ASTUTE (¾” NPT-M to ¾” BSPT-F adapter) GHE37-300 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-F to 2” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter) GHE45-300 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side)) GHE56-300 ASTUTE Gas-Fired, Storage Water Heater (1.5” NPT-M to 1.5” BSPT-M adapter provided. 2” NPT-F to 2” BSPT-M adapter provided. 2” NPT-M to 2” BSPT-F adapter provided 1.5” NPT (Top) & 2” NPT (Side) GHE84-300 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-F to 2” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side)) GHE37-380 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side)) GHE45-380 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side)) GHE57-380 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side)) GHE70-380 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side)) GHE84-380 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side)) GHE97-380 ASTUTE (1.5” NPT-M to 1.5” BSPT-M adapter 2” NPT-M to 2” BSPT-F adapter 1.5” NPT (Top) & 2” NPT (Side))

Approval Holder:: Rheem Sales Company, Inc.

Company Name
Rheem Sales Company, Inc.
Address
2600 Gunter Park Drive East Montgomery, AL 36109 USA

View All Listings by this Company

WRAS Approval Number: #251204703

Range of single or double tank water heaters, incorporating enamel coated carbon steel tank. The secondary circuit is factory fitted with a temperature and pressure relief valve (10.0 Bar). Maximum working pressure 8 bar. Maximum operating temperature 75 °C.

Section:: 1890 Unvented Heating Apparatus
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Vanward, model, pressure and other tech info on label.
Installation Requirements:: R001 R140
Expiry date:: 31/12/2030
Model:: Round Tank Electric Water Heater: Face of Unit: B7E DSCF**-B7EHV-15, DSCF**-B7EHV-20, DSCF**-B7EEHV-20 Face of Unit: B8E DSCF**-B8EHV-15, DSCF**-B8EHV-20, DSCF**-B8EEHV-20 Face of Unit: B10E DSCF**-B10EHV-15, DSCF**-B10EHV-20, DSCF**-B10EEHV-20 Face of Unit: D1M DSCF**-D1MHV-15, DSCF**-D1MHV-20, DSCF**-D1MGHV, DSCF**-D1MGEHV Face of Unit: D2M DSCF**-D2MHV-15, DSCF**-D2MHV-20, DSCF**-D2MEHV-20 Face of Unit: D3M DSCF**-D3MHV-15, DSCF**-D3MHV-20, DSCF**-D3MEHV-20, DSCF**-D3MGHV-20, DSCF**-D3MGEHV-20 Face of Unit: D4M DSCF**-D4MHV-15, DSCF**-D4MHV-20, DSCF**-D4MEHV-20 Face of Unit: D5M DSCF**-D5MHV-15, DSCF**-D5MHV-20, DSCF**-D5MGHV-20, DSCF**-D5MEHV-20, DSCF**-D5MGEHV-20 Face of Unit: H1M DSCF**-H1MHV-15, DSCF**-H1MHV-20 Face of Unit: B1M DSCF**- DSCF**-B1MHV-20, DSCF**-B1MHV-15, DSCF**-B1MGHV-15, DSCF**-B1MGEHV Face of Unit: B1E DSCF**-B1EHV-20, DSCF**-B1EHV-15, DSCF**-B1EHV, DSCF**-B1EEHV Face of Unit: B2M DSCF**-B2MHV-15, DSCF**-B2MHV-20, DSCF**-B2MGHV-20, DSCF**-B2MGEHV-20 Face of Unit: B2M2 DSCF**-B2M2HV-15, DSCF**-B2M2HV-20 Face of Unit: B2E DSCF**-B2EHV-15, DSCF**-B2EHV-20, DSCF**-B2EEHV-20 Face of Unit: B3M DSCF**-B3MHV-15, DSCF**-B3MHV-20, DSCF**-B3MEHV-20 Face of Unit: B4M DSCF**-B4MHV-15, DSCF**-B4MHV-20, DSCF**-B4MEHV-20 Face of Unit: B5M DSCF**-B5MHV-15, DSCF**-B5MHV-20, DSCF**-B5MEHV-20 Face of Unit: B6M DSCF**-B6MHV-15, DSCF**-B6MHV-20, DSCF**-B6MEHV-20, DSCF**-B6MGHV-20, DSCF**-B6MGEHV-20 Face of Unit: B9E DSCF**-B9EHV-15, DSCF**-B9EHV-20, DSCF**-B9EEHV-20 Face of Unit: B11E DSCF**-B11EHV-20 Coding: 1. **= Capacity (30L, 50L, 80L, 100L, 120L, 150L) 2. B7, B8, B10, D1, D2, D3, D4, D5, H1, B1, B2, B3, B4, B5, B6, B9, B11, B13 = cover 3. M = mechanical type, E (behind the cover) = screen- touch type 4. "2" = mechanical type with digital display, none = others 5. G = adjustable temperature & power level, none = unadjustable ones 6. E (behind the operating type) = enamel coated heating pipe, none = regular one without coated 7. HV = installation type = horizontally & vertically installed type, none = vertically installed type 8. “20” = max rated power = 2kW, “15” = max rated power = 1.5kW (can be omitted) Face of Unit: B13 DSCF30-B13-15, DSCF30-B13E-15, DSCF30-B13-20, DSCF30-B13E-20, DSCF50-B13-15, DSCF50-B13E-15, DSCF50-B13-20, DSCF50-B13E-20, DSCF55-B13-15, DSCF55-B13E-15, DSCF55-B13-20, DSCF55-B13E-20, DSCF80-B13-15, DSCF80-B13E-15, DSCF80-B13-20, DSCF80-B13E-20, DSCF100-B13-15, DSCF100-B13E-15, DSCF100-B13-20, DSCF100-B13E-20, DSCF120-B13-15, DSCF120-B13E-15, DSCF120-B13-20, DSCF120-B13E-20 Coding for Face of Unit: B13 only 1. All models are screen-touch type 2. Fixed capacity (30L, 50L, 55L, 80L, 100L, 120L) 3. B13 = cover 4. E = enamel coated heating pipe, none = regular one without coated 5. 20 = max rated power = 2kW, 15 = max rated power = 1.5kW Double Tank Electric Water Heater Face of Unit: T1M DSCF**-T1MHV-20 Face of Unit: T1E DSCF**-T1EHV-20 Face of Unit: T1M2 DSCF**-T1M2HV-20 Face of Unit: T2E DSCF**-T2EHV-20 Coding 1. **= Capacity (available in 30, 50, 80, 100: 30 stands for 28L, 50 for 47L, 80 for 66L, 100 for 81L) 2. T1, T2 = cover 3. M = mechanical type, E = screen-touch type 4. "2" (behind the operating type) = 2 knobs, none = 1 knob 5. HV = installation type = horizontally & vertically installed type 6. 20 = max rated power = 2kW

Approval Holder:: Guangdong Vanward Electric Co. Ltd.

Company Name
Guangdong Vanward Electric Co. Ltd.
Address
East Side of Yangxi Avenue (Renhe), Yanghe, Gaoming, Foshan Guangdong
Country
China
Phone
+86-757-28898888
General Email
vanward@vanward.com

View All Listings by this Company

WRAS Approval Number: #260102005

Range of 2, 3 and 4 port manifold assemblies with either DRZ brass (3834.1, 3834.34, 3835.34, 3835.1, 3837.37 & 3837.1) or brushed chrome plated brass bodies incorporating screw down isolation valves with dome type operating members at each of the outlets. Maximum working pressure: 16 Bar. Maximum operating temperature: 95°C.

Section:: 1950 Manifolds
Section Subtitle:: Metal.
WRAS Approval Number:: 260102005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below.
Marking:: FAR, size and made in Italy on body. FAR, size, made in Italy & CR on body (only on models 3834.1, 3834.34, 3835.34, 3835.1, 3837.37 & 3837.1).
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: 2 Port: 3825.34 (3/4” BSP (M) X 3/4“ BSP (F)) 3825.1 (1” BSP (M) X 1” BSP (F)) 3834.1 (1” BSP (M) X 1” BSP (F)) 3834.34 (3/4” BSP (M) X 3/4“ BSP (F)) 38213412EU (3/4” BSP (M) X 1/2“ BSP (M)) 3821 112EU (1” BSP (M) X 1/2“ BSP (M)) 3821 134EU (1” BSP (M) X 3/4“ BSP (M)) 3 Port: 3850.34 (3/4” BSP (M) X 3/4” BSP (F)) 3850.1 (1” BSP (M) X 1” BSP (F)) 3835.34 (3/4” BSP (M) X 3/4” BSP (F)) 3835.1 (1” BSP (M) X 1” BSP (F)) 3822 3412EU (3/4” BSP (M) X 1/2” BSP (F)) 3822112EU (1” BSP (M) X 1/2” BSP (F)) 3822 134EU (1” BSP (M) X 3/4” BSP (F)) 4 Port: 3856.34 (¾” BSP (M) X ¾” BSP (F)) 3856.1 (1” BSP (M) X 1” BSP (F)) 3837.34 (¾” BSP (M) X ¾” BSP (F)) 3837.1 (1” BSP (M) X 1” BSP (F)) 3824 3412EU (1” BSP (M) X 1/2” BSP (F)) 3824 112EU (1” BSP (M) X 1/2” BSP (F)) 3824 134EU (1” BSP (M) X 3/4” BSP (F))

Approval Holder:: FAR Rubinetterie S.p.A.

Company Name
FAR Rubinetterie S.p.A.
Address
Via Morena 20, 28024, Gozzano (NO)

View All Listings by this Company

WRAS Approval Number: #251202014

Range of wall mounted manually operated, concealed shower valves (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members and a manual diverter to shower outlets with single lever operating members. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:: 2000 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control.
WRAS Approval Number:: 251202014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2" BSP (F)
Marking:: VOLA on operating member. VOLA and CR on body
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030
Model:: VOLA 2400V VOLA 2400FV VOLA 2400NV VOLA 2400RV VOLA 2400TV

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #251202024

Range of wall mounted shower valves with brass bodies with various finishes (see models). The products incorporate a ceramic cartridge headwork with a single lever operating member that controls both the flow and temperature. Maximum working pressure; 10 Bar Maximum operating temperature; 60°c

Section:: 2000 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control.
WRAS Approval Number:: 251202024
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2" BSP (M)
Marking:: Villeroy & Boch on operating member
Installation Requirements:: R001 R020
Expiry date:: 31/12/2030
Model:: TVS116004000XX Where XX denotes the finish, and can be replaced with any of the following: 61 = Chrome K5 = Matt black 76 = Brushed gold 64 -= Brushed nickel

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

WRAS Approval Number: #251202021

Range of wall mounted thermostatic shower valves with (brass bodies – various finishes), incorporating a 2-way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic strainer. The product incorporates approved single check valves at the inlet, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure; 10 Bar Maximum operating temperature; 60°c

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 251202021
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Villeroy Boch on operating member
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030
Model:: TVS11000400061 TVS110004000K5 TVS11000500061 TVS110005000K5

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

WRAS Approval Number: #251202034

Range of wall mounted thermostatic shower valves (brass bodies – various finishes) incorporating either a 2-way ceramic disc diverter (model TVT11000200061) controlling the flow to either an overhead shower or bath filler with dome operating members or a quarter turn ceramic disc headwork to shower handset. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature is 60°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 251202034
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Villeroy & Boch laser etched on handle and body
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030
Model:: TVS110007000XX TVT110002000XX XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel)

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

WRAS Approval Number: #251204008

Range of concealed, wall mounted thermostatic shower valves with brass bodies (chromium plated trim sets). The products incorporate a one or two-way function and a thermostatic cartridge controlling the temperature with lever type operating members. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 251204008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Product to be installed in combination with 01 500 180 iBox universal 2 Basic set.
Size:: ½” BSP (M)
Marking:: Hansgrohe on body.
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030
Model:: 33 710 xx0 Ecostat Comfort E Thermostat for concealed installation for 1 function 33 711 xx0 Ecostat Comfort E Thermostat for concealed installation for 2 functions 33 712 xx0 Ecostat Comfort Q Thermostat for concealed installation for 1 function 33 713 xx0 Ecostat Comfort Q Thermostat for concealed installation for 2 functions 33 714 xx0 Ecostat Comfort S Thermostat for concealed installation for 1 function 33 715 xx0 Ecostat Comfort S Thermostat for concealed installation for 2 functions 33 716 xx0 Ecostat Comfort E Thermostat for concealed installation for 2 functions with integrated security combination according to EN1717 33 717 xx0 Ecostat Comfort Q Thermostat for concealed installation for 2 functions with integrated security combination according to EN1717 33 718 xx0 Ecostat Comfort S Thermostat for concealed installation for 2 functions with integrated security combination according to EN1717 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #241202086

Range of flanged butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 241202086
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: JMC BC3 LB: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (flanged type). Sizes added July 2025: DN1400, DN1500, DN1600, DN1800, DN2000 (flanged type).
Marking:: SAPAG & Company logo FAMAT(brand of Sapag), DN & PN16 on body.
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: JMC BC3 LB

Product Images

Approval Holder:: SAPAG VALVES

Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Country
France
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

WRAS Approval Number: #251212022

Range of butterfly valves with blue epoxy coated ductile iron bodies, stainless steel discs with EPDM seats and a lever operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 251212022
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50 – DN400
Marking:: DN,PN on body, Butterfly Valve, LIKE VALVE (TIANJIN) CO.,LTD, PN, DN, Series NO. on name plate.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: LKBVF1

Approval Holder:: LIKE VALVE (TIANJIN) CO.,LTD.

Company Name
LIKE VALVE (TIANJIN) CO.,LTD.
Address
NO. 358-1 KANGDA STREET, ZHONGTANG TOWN, BINHAI NEW DISTRICT, TIANJIN
Country
China
Phone
+86-17695602777
General Email
nbdien2@nbdien.com

View All Listings by this Company
Manufacturer:: LIKE VALVE (TIANJIN) CO.,LTD.

Company Name
LIKE VALVE (TIANJIN) CO.,LTD.
Address
NO. 358-1 KANGDA STREET, ZHONGTANG TOWN, BINHAI NEW DISTRICT, TIANJIN
Country
China
Phone
+86-17695602777
General Email
nbdien2@nbdien.com

View All Listings by this Company

WRAS Approval Number: #251202020

Range of eccentric flanged type butterfly valves with ductile iron bodies and disc (blue epoxy coated) and EPDM seats. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 251202020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: Newstar valve logo, PN, DN, date of manufacture (MM/YYYY) and product info on plate on body. PN, DN on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: D342Xb – DN150-DN1600

Approval Holder:: NEWSTAR VALVE(ZHENGZHOU) CO., LTD.

Company Name
NEWSTAR VALVE(ZHENGZHOU) CO., LTD.
Address
No.93, Huaiyang Road, Shangjie District, Zhengzhou City, Henan Province.China

View All Listings by this Company

WRAS Approval Number: #251202028

Range of wafer, lugged and flanged butterfly valves with blue epoxy coated ductile iron bodies, nickel plated ductile iron discs, EPDM seat and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 251202028
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: D371X-16Q (Wafer): DN50 - 800, LTD371X-16Q (Lugged): DN50 - 800, D341X-16Q (Flanged): DN50 - 800.
Marking:: Shanghai Hugong Valve Factory (Group) Co., Ltd logo, DN and PN on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: D371X-16Q (Wafer), LTD371X-16Q (Lugged), D341X-16Q (Flanged).

Approval Holder:: Shanghai Hugong Valve Factory (Group) Co.,Ltd

Company Name
Shanghai Hugong Valve Factory (Group) Co.,Ltd
Address
No.555. Huagao Road, Huating Town ,Jiading District, Shanghai, P.R.China

View All Listings by this Company

WRAS Approval Number: #251012023

2101 Range of butterfly valves with blue epoxy coated ductile iron bodies, stainless-steel discs and PTFE seats. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 251012023
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Genebre, DN, PN and material cast on body. 'G' logo on name plate & other technical information.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 2101 : Wafer type Stainless steel discs with PTFE seats, 10bar DN50-DN125 2101: Wafer type Stainless steel discs with PTFE seats, 10bar DN150 and DN200

Approval Holder:: Genebre, S.A

Company Name
Genebre, S.A
Address
Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es

View All Listings by this Company

WRAS Approval Number: #260115301

Section:: 2050 Diverter
Description:: A Range of Diverter cartridge(s) with manual adjustment.
Plastic body/bodies
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/01/2031

Product Identification	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
D22P-1D	22mm	16 bar	85 °C	MS, D22-1D	Body	No
D26P-3	26mm	16 bar	85 °C	MS, D26P-3	Body	No
D26P-3B	26mm	16 bar	85 °C	MS, D26P-3B	Body	No
D26P-3FY	26mm	16 bar	85 °C	MS, D26P-3FY	Body	No
D28P-3B2	28mm	16 bar	85 °C	MS, D28P-3B2	Body	No
D28P-3B3	28mm	16 bar	85 °C	MS, D28P-3B3	Body	No
D28P-3D2	28mm	16 bar	85 °C	MS, D28P-3D2	Body	No
D28P-6	28mm	16 bar	85 °C	MS, D28P-6	Body	No
D40P-19A	40mm	16 bar	85 °C	MS, D40P-19A	Body	No
D40P-19B2	40mm	16 bar	85 °C	MS, D40P-19B2	Body	No
D56P-1	56mm	16 bar	85 °C	MS, D56P-1	Body	No
D56P-2	56mm	16 bar	85 °C	MS, D56P-2	Body	No
D56P-3	56mm	16 bar	85 °C	MS, D56P-3	Body	No

Approval Holder:: Zhuhai Mingshi Hardware Manufacturing Co.,Ltd

Company Name
Zhuhai Mingshi Hardware Manufacturing Co.,Ltd
Address
No.15,gold coast avenue,sanzao town, jinwan district,zhuhai,china
General Email
sales@zhmingshi.com

View All Listings by this Company
Manufacturers:: Zhuhai Mingshi Hardware Manufacturing Co., Ltd

WRAS Approval Number: #251212018

2-way, ceramic disc, rotary diverter valve which controls and diverts the flow, for insertion into specifically dimensioned bodies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.

Section:: 2050 Diverter
Section Subtitle:: Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:: 251212018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 25.15mm
Marking:: CITEC (brand name) on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: Diverter Cartridge CT-25

Approval Holder:: Kaiping Citec Sanitary Components Co.,Ltd.

Company Name
Kaiping Citec Sanitary Components Co.,Ltd.
Postcode
529300
Country
China
Phone
750 2761910
General Email
helenguan@kcitec.com

View All Listings by this Company
Manufacturer:: Kaiping Citec Sanitary Components Co.,Ltd.

Company Name
Kaiping Citec Sanitary Components Co.,Ltd.
Postcode
529300
Country
China
Phone
750 2761910
General Email
helenguan@kcitec.com

View All Listings by this Company

WRAS Approval Number: #251202722

Fire hydrant with an epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C. Above ground use only.

Section:: 2070 Valves
Section Subtitle:: Fire hydrant. Where possible, above ground fire hydrants should be considered. The location of fire hydrants should be site specific and subject to assessment of fluid category risk.
WRAS Approval Number:: 251202722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN80
Marking:: Tongling Tianhai logo, DN and PN on body
Installation Requirements:: R001 R415
Expiry date:: 31/12/2030
Model:: FH001

Approval Holder:: Tongling Tianhai Flow Control Co., Ltd.

Company Name
Tongling Tianhai Flow Control Co., Ltd.
Address
No.1999 Tongjing East Road, Shizishan High-Tech Industrial Development Zone, Tongling, Anhui
Country
China

View All Listings by this Company

WRAS Approval Number: #251202713

Range of swing gate non-return valves with epoxy coated ductile iron bodies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80.0°C.

Section:: 2188 Valves
Section Subtitle:: Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection
WRAS Approval Number:: 251202713
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: S240 (without lever & weight): DN50, DN80, DN100, DN150 Flanged, S240 (with lever & weight): DN150, DN200, DN250, DN300 Flanged.
Marking:: AFFCO, DoM (MM/YYYY) and technical information on data plate. Flow arrow and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: S240 (without lever and weight), S240 (with lever and weight).

Approval Holder:: AFFCO Flow Control (Shanghai) Co., Ltd

Company Name
AFFCO Flow Control (Shanghai) Co., Ltd
Address
Fengxian District, No.99, Desheng Road, Fengcheng Town, Shanghai City
Country
China

View All Listings by this Company

WRAS Approval Number: #251202717

Range of swing gate non return valves with ductile iron bodies (blue epoxy coated). Maximum working pressure - 16.0 bar. Maximum operating temperature - 85°C.

Section:: 2188 Valves
Section Subtitle:: Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection
WRAS Approval Number:: 251202717
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300 - Flanged.
Marking:: Tongling Tianhai Logo, DN, PN and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: H44X/T.

Approval Holder:: Tongling Tianhai Flow Control Co., Ltd.

Company Name
Tongling Tianhai Flow Control Co., Ltd.
Address
No.1999 Tongjing East Road, Shizishan High-Tech Industrial Development Zone, Tongling, Anhui
Country
China

View All Listings by this Company

WRAS Approval Number: #260402001

Range of normally open or closed solenoid valves with brass bodies. Maximum working pressures: SCE210C034BW, SCE210C035BW: AC only 9.0 bar. SCE210C094BW, SCE210D095BW: AC 9.0 bar, DC 3.0 bar. Maximum operating temperature: 85°C

Section:: 2230 Valves
Section Subtitle:: Solenoid, metal.
WRAS Approval Number:: 260402001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: ASCO, model code and other technical information on adhesive label on coil body. ASCO logo and IN/OUT on valve body.
Installation Requirements:: R001
Expiry date:: 30/04/2031
Model:: SCE210C034BW - Normally open - 1/2” BSP (F), SCE210C035BW - Normally open - 3/4” BSP (F), SCE210C094BW - Normally closed - 1/2” BSP (F), SCE210D095BW - Normally closed - 3/4” BSP (F).

Approval Holder:: Emerson Automation Fluid Control & Pneumatics UK Ltd & Emerson Automation Fluid Control & Pneumatics Poland Sp. z.o. o

Company Name
Emerson Automation Fluid Control & Pneumatics UK Ltd & Emerson Automation Fluid Control & Pneumatics Poland Sp. z.o. o
Postcode
WN8 9PG

View All Listings by this Company

WRAS Approval Number: #251202008

Range of 3-way brass spherical valves incorporating a chrome plated brass ball and PTFE seats. Maximum working pressure: See models Maximum operating temperature 60.0°C

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 251202008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: ITAP logo, year and week (YYWW), made in Italy, size, PN on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 1280014L - 1/4” BSP (F) – 55 bar 1280038L - 3/8” BSP (F) – 55 bar 1280012L - 1/2” BSP (F) – 50 bar 1280034L - 3/4” BSP (F) – 50 bar 1280100L - 1” BSP (F) – 45 bar 1280114L - 1”1/4 BSP (F) – 35 bar 1280112L - 1”1/2 BSP (F) – 35 bar 1280200L - 2” BSP (F) – 35 bar 1280014T - 1/4” BSP (F) – 55 bar 1280038T - 3/8” BSP (F) – 55 bar 1280012T - 1/2” BSP (F) – 50 bar 1280034T - 3/4” BSP (F) - 50 bar 1280100T - 1” BSP (F) – 45 bar 1280114T - 1”1/4 BSP (F) – 35 bar 1280112T - 1”1/2 BSP (F) – 35 bar 1280200T - 2” BSP (F) – 35 bar

Approval Holder:: Itap Spa

Company Name
Itap Spa
Address
Via Ruca 19. 25065 Lumezzane (BS), Italy
Postcode
25065
Phone
+39 030 89270
General Email
info@itap.it

View All Listings by this Company

WRAS Approval Number: #251202016

Range of in line spherical valves incorporating chrome plated brass bodies, chrome plated brass ball. Model 825212 & 803815 incorporate a single lever operating member, models 825015 and 8250152 have no operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 251202016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: DELABIE and model number on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 825015 (1/2” BSP (F) x 1/2” BSP (M)) 825212 (3/8” BSP Captive nut x 3/8” BSP (M)) 8250215 (1/2” BSP (M) x 1/2” BSP (M)) 803815 (1/2" BSP (M) x 3/8" BSP (M))

Approval Holder:: Delabie SAS

Company Name
Delabie SAS
Address
1-3 Henderson house Hithercroft Road Wallingford Oxfordshire
Postcode
OX10 9DG
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #251202027

Range of in-line lever operated spherical (SB2415) or screwdriver operated servicing (SB1915 & SB1922) valves with chromium plated brass bodies and balls, EPDM seals and ‘SharkBite’ push fit end connections. For use with PB pipe manufactured to EN7291-2:2010, PEX Pipe Manufactured to EN 7291-3:2010 and copper pipe manufactured to EN1057. Maximum working pressure: 12.5 Bar at 20°C (PEX & PB Pipe) 6.0 Bar at 95°C (PEX & PB Pipe) 20.0 Bar at 20°C (Copper Pipe) 16.0 Bar at 95°C (Copper Pipe)

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 251202027
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Sharkbite logo, CR mark, size, date of manufacturer (WW/YY) and flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: SB2415 – 15mm Pushfit SB1915 – 15mm Pushfit SB1922 – 22mm Pushfit

Approval Holder:: Reliance Worldwide Corporation (UK) Ltd

Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #251202039

Range of spherical valves incorporating brass bodies and balls (nickel plated), EPDM rubber ‘O’-rings, PTFE seats and red or blue coloured lever type operating members. Maximum working pressure; 10 Bar Maximum operating temperature; 65°c

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 251202039
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 3/4” BSP (M) x 3/4” captive nut.
Marking:: Novasfer logo and DN15 on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: BV1227RD BV1227BL

Approval Holder:: Novasfer

Company Name
Novasfer
Address
Via Galileo Galilei 3, 25080 Carzago Riviera BS
Postcode
Italy

View All Listings by this Company

WRAS Approval Number: #260204004

Range of spherical valves incorporating brass bodies and ball. Maximum working pressure see models. Maximum operating temperature 100°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 260204004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Airaga logo, size PN, D.o.M. (YYWW).
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: AI-171RB5 ¾” FF 40bar AI-171RB4 ½” FF 50bar AI-171BB5 ¾” FF 40bar AI-171BB4 ½” FF 50bar AI-171R12 4” FF 16bar AI-171R11 3” FF 16bar AI-171R10 2 ½” FF 16bar AI-171R03 3/8” FF 40bar AI-171R02 ¼” FF 40bar AI-171B11 3” FF 16bar AI-171B10 2 ½” FF 16bar AI-171B03 3/8” FF 40bar AI-171B02 ¼” FF 40bar AI-171B12 4” FF 16bar AI-171R09 2” FF 16bar AI-171R08 1 ½” FF 16bar AI-171R07 1 ¼” FF 25bar AI-171R06 1” FF 40bar AI-171R05 ¾” FF 40bar AI-171R04 ½” FF 50bar AI-171B09 2” FF 16bar AI-171B08 1 ½” FF 16bar AI-171B07 1 ¼” FF 25bar AI-171B05 ¾” FF 40bar AI-171B06 1” FF 40bar AI-171B04 ½” FF 50bar 124-1027 1” MM 40bar 124-1041 CST 3/8” MM 40bar 124-1042 CST ½” MM 40bar 124-1043CST ¾” MM 40bar 124-1044 CST 1” MM 25bar 124-1031 CST 1 ¼” MM 25bar 124-1032 CST 1 ½” MM 16bar 124-1033 CST 2”MM 16bar 124-1027 CST 3/8” MM 40bar 124-1028 CST ½” MM 40bar 124-1029 CST ¾” MM 40bar 124-1030 CST 1” MM 25bar AI-8718686945 ¾” MM 50bar AI-3621050503 ¾” MM 50bar AI-3621050501 ¾” MM 50bar 124-3001 1” MF 10bar AI-085805 ¾” MF 50bar AI-856A04 ½” MF 50bar AI-856A05 ¾” MF 50bar AI-0856A06 1” MF 40bar AI-0856A07 1 1/4" MF 25bar AI-0856A08 1 1/2" MF 16bar AI-0856A09 2" MF 16bar AI-176A07 1 1/4" MF 25bar AI-085806 1” MF 40bar AI-085806B 1” MF 40bar AI-085805B ¾” MF 50bar 124-3200 ½” MF 50bar 124-3201 ¾” MF 40bar 124-3202 1” MF 40bar 124-3203 1 ¼” MF 25bar 124-3204 1 ½” MF 16bar 124-3205 2”MF 16bar

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Airaga Rubinetterie Spa

Company Name
Airaga Rubinetterie Spa
Address
Via Per Briga 42 28024 Gozzano Novara
Country
Italy
General Email

View All Listings by this Company

WRAS Approval Number: #251208004

Range of press fit spherical valves with brass bodies, stainless steel balls and PTFE seats. The valve are available with lever, extended lever, lockshield lever and butterfly handle operating members. For use with copper pipe (manufactured to EN1057) and stainless-steel pipe (manufactured to EN10312). Jointing is achieved via a crimping tool using a ‘M’ or ‘V’ profile (model dependent). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 251208004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15 - 54mm press fit.
Marking:: Manufacturers logo, PN, DN and lead free on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: ‘M’ profile models: Spherical valves. (Lever), 1372M-EH-XX (Extended Lever), 1372M-T-XX (Butterfly handle), 1372M-WS-XX (Lockshield Lever). ‘V’ profile models: 1372V-XX (Lever), 1372V-EH-XX (Extended Lever), 1372V-T-XX (Butterfly handle), 1372V-WS-XX (Lockshield Lever). Where: XX denotes sizes and can be replaced with: 15, 18, 22, 28, 35, 42 or 54.

Approval Holder:: NINGBO RIAN VALVE CO.,LTD

Company Name
NINGBO RIAN VALVE CO.,LTD
Address
JISHAN XIDIAN TOWN NINGHAI COUNTY NINGBO CITY ZHEJIANG
Country
China
Phone
86-574-65179015
General Email
ellen@chinarian.com

View All Listings by this Company

WRAS Approval Number: #251212021

Range of gate valves incorporating cast iron bodies (blue epoxy coated), EPDM rubber coated wedges and non-rising spindles with hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 251212021
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700 & DN800 - Flanged.
Marking:: Company logo, Material, PN16 & DN on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: Z45X-16Q.

Approval Holder:: Suzhou Youwei Fluid Technology Co.Ltd.

Company Name
Suzhou Youwei Fluid Technology Co.Ltd.
Address
28 Datong Road, Huqiu District, Suzhou City, Jiangsu Province，
Country
CHINA
General Email
technical02@shangdurz.com

View All Listings by this Company

WRAS Approval Number: #251202018

Range of gate valves with blue epoxy coated ductile iron bodies, EPDM coated ductile iron wedges. The valves operate via a non-rising spindle headwork with hand wheel operating member. Maximum working pressure –16.0 bar. Maximum operating temperature - 85°C

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 251202018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN40 – DN800 flanged
Marking:: Qingdao huaguan logo, WRAS, DN and PN on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: Z45X-16

Approval Holder:: Qingdao Huaguan Valve Co., Ltd.

Company Name
Qingdao Huaguan Valve Co., Ltd.
Address
Wanjia Town, Pingdu, Qingao City, Shandong Province China

View All Listings by this Company

WRAS Approval Number: #251202032

Range of gate valves with blue epoxy coated ductile iron bodies and EPDM coated ductile iron wedges. The valves operate via a non-rising spindle headwork with hand wheel operating member or electronic remote-control system (see model). Maximum working pressure 16.0 bar. Cold water use only.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 251202032
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50 - DN300 flanged.
Marking:: Cair logo, size, pressure and model on data plate on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: CRG-16 (Handwheel), CRG-BGB-16 (Bevel gearbox operated), CRG-M-16 (Motorised) CRG-M-BGB-16 (Motorised and Bevel gearbox operated).

Approval Holder:: CAIR EUROMATIC AUTOMATION PVT. LTD.

Company Name
CAIR EUROMATIC AUTOMATION PVT. LTD.
Address
PLOT No. 129, SHED No. 1, CAIR ESTATE, NEAR KASHIRAM TEXTILE MILL, NAROL, AHMEDABAD, GUJARAT – 382405, INDIA

View All Listings by this Company
Manufacturer:: CAIR EUROMATIC AUTOMATION PVT. LTD.

Company Name
CAIR EUROMATIC AUTOMATION PVT. LTD.
Address
Sur. No. -129, Palki T.P. No. 63, F.P. No. 22/1, Khangi Milkat No. 2, Cair Estate, Shed No.1, Ranipur Road, Narol, Ahmedabad, Gujarat – 382430
Country
India

View All Listings by this Company

WRAS Approval Number: #251202036

Screw down stop valve (chromium plated brass) incorporating a dome (triangular) type operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 100.0°C

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 251202036
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP M
Marking:: Aquanox logo and WRAS on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 5253

Approval Holder:: HYDROPOINT BUILDING MATERIAL TRADING LLC

Company Name
HYDROPOINT BUILDING MATERIAL TRADING LLC

View All Listings by this Company