Section:

1800 Taps

Description:

A Pillar tap(s).

Deck Mounted, Capable of achieving AUK3 tap gap. Incorporating stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009

Expiry date:

30/11/2030

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. For non-potable water use only. Maximum working pressure 10.0 bar. Maximum operating temperature see models.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

260104002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Caleffi logo on body.

Installation Requirements:

R001 R200

Expiry date:

31/01/2031

Model:

502930 TH 3/8" 110°C 502934 CST 3/8" 110°C 502420 1/4" 115 °C 502430 3/8" 115 °C 502430 CON 3/8" 115 °C 502430 CST 3/8" 115 °C 502431 BSC 3/8" 115 °C 502434 CST 3/8" 115 °C 502435 CST 3/8" 115 °C 502530 TH 3/8" 110°C 502530 TH1 3/8" 110°C 502641 3/8" 115°C 502643A 1/2" NPT 115°C 502533 3/8" 110°C 502533 FRT 3/8" 110°C 502533 TAK 3/8" 110°C 502543 3/8" 110°C 502533 RIF 3/8" 110°C 502530 3/8" 110°C 502141 1/2" 110 °C 502142 1/2" 110 °C 502145 RIF 1/2" 110 °C 502145 RSR 1/2" 110 °C 502630 3/8" 115°C 502630 CST 3/8" 115°C 502636 CST 3/8" 115°C 502638 CST 3/8" 115°C 502638 OEM 3/8" 115°C 502631 CST 3/8" 115°C 502822 1/4" NPT 502620A 1/4" NPT 115°C 502610A 1/8" NPT 115°C 502630 WLF 3/8" 115°C 502634 CST 3/8" 115°C 502640 1/2" 115°C 502649 1/2" 115°C 502649 CST 1/2" 115°C 502730 3/8" 110°C 502730 CST 3/8" 110°C 502730 BSC 3/8" 110°C 502730 NTR 3/8" 110°C 502710A 1/8" NPTF 110°C 502720A 1/4" NPTF 110°C 502030 3/8" 120 °C 502030 CON 3/8" 120 °C 502030 CST 3/8" 120 °C 502035 CST 3/8" 120 °C 502037 CST 3/8" 120 °C 502037 VLL 3/8" 120 °C 502037 WLF 3/8" 120 °C 502038 CST 3/8" 120 °C 502020 CST 1/4" 120 °C 502034 CST 3/8" 120 °C 502130 3/8" 110 °C 502031 3/8" 120 °C 502130 TH1 3/8" 110 °C 502033 CST 3/8" 120 °C 502015A 1/8" NPT 120 °C 502015 B&G 1/8" NPT 120 °C 502015A WEB 1/8" NPT 120 °C 502015 MTR 1/8" NPT 120 °C 502040A 1/2" NPT 120 °C 502040A WEB 1/2" NPT 120 °C 502043A 1/2" NPT 120 °C 502043A CST 1/2" 120 °C 502044 CST 1/2" 120 °C 502040 1/2" 120 °C 502040 CST 1/2" 120 °C 502043 1/2" 120 °C 502043 CST 1/2" 120 °C 502140 1/2" 110 °C 502140 FRT 1/2" 110 °C 502041 1/2" 120 °C 502041 MI 1/2" 120 °C 502046 IMM 1/2" 120 °C 502221 1/4" 120°C 502231 3/8" 120°C 502231 CST 3/8" 120°C 502232 TH 3/8" 120°C 502241 1/2" 120°C 502243A 1/2" NPTF 120°C 502343A 1/2" NPTF 120°C 502246 IMM 1/2" 120°C 502242 TH 1/2" 120°C 502115A 1/8" NPT 110 °C 502133 3/8" 110 °C 502131 3/8" 110 °C 502131 TH 3/8" 110 °C 502132 DEC 3/8" 110 °C 502130 CST 3/8" 110 °C 502130 FRT 3/8" 110 °C 502130 TAK 3/8" 110 °C 502130 TH 3/8" 110 °C 502135 RIF 3/8" 110 °C 502050 3/4" 120 °C 502051 3/4" 120 °C 502052 CST 3/4" 120 °C 502060 1" 120 °C 502055 120 °C 502061 1" 120 °C 502067 1" 120 °C 502400 CST Press fitting ø22,2 customer designed 115 °C 501500 3/4" 120 °C

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted. Undefinable Air Gap – See IRN’s Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Address

XUANMEN INDUSTRIAL ZONE YUHUAN CHINA

Country

CHINA

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/09/2030

Approval Holder:

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Company Name

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Address

No.57, Sijiu Road, Zhishan Town, Heshan City, Guangdong

Country

China

General Email

2894475300@qq.com

View All Listings by this Company

Manufacturers:

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Range of spring loaded, resilient trim, non-return valves with, stainless steel bodies and plunger with EPDM seals. Maximum working pressure 16.0 bar. Cold water use only.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.

WRAS Approval Number:

250602711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” - 4” BSP (F)

Marking:

Mondeo, flow arrow, size, pressure and date of manufacture (DD/MM/YY) on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Small DW 900103A 900106A 900110A 900112A 900117A 900120A Idrja DW 900010A 900400A 900015A 900410A 900020A 900420A 900025A 900430A 900028A 900440A 900056A 900451A 900461A 900471A Idrja DW MFA 900017MFA 900022MFA 900027MFA 900030MFA 900017FMA 900022FMA

Manufacturer:

Mondeo Srl.

Company Name

Mondeo Srl.

Address

STRADA DEL CAPITELLO SN MONTECCHIO MAGGIORE

Country

Italy

View All Listings by this Company

A swing gate, resilient trim, non-return valve with blue epoxy coated ductile iron body. Maximum working pressure: 25bar Maximum operating temperature: 85°C.

Section:

2188 Valves

Section Subtitle:

Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection

WRAS Approval Number:

250712701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN200 - Flanged.

Marking:

Jinan Meide Casting Co. Ltd. Logo and product info on data plate. PN, size, flow arrow, DI, date (YYYY) & MECH logo on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

H44X2-PN25

Approval Holder:

Jinan Meide Casting Co., Ltd

Company Name

Jinan Meide Casting Co., Ltd

Address

Meide Science and Technology Park, Pingyin Industrial Park, Jinan Shandong Province

Country

China

Phone

86-531-87856308

View All Listings by this Company

Range of adjustable, in-line pressure reducing valves with blue epoxy coated, cast iron bodies. 447 70 models: maximum supply pressure 25.0 bar, outlet pressure range 1.5 to 7.0 bar. Maximum operating temperature 60°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

240702715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 to DN125 flanged inlet and outlet

Marking:

Goetze, model and set pressure range on label on body. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

447 70 XX Pressure Reducing Valves, Where XX = outlet pressure range

Approval Holder:

Oventrop UK Limited

Company Name

Oventrop UK Limited

Address

Oventrop House Unit 11 Hatch Industrial Park Greywell Road Hatch Basingstoke

Postcode

RG24 7NG

Country

United Kingdom

Phone

+44 (0) 1256 330 441

General Email

mikewise@oventrop.co.uk

View All Listings by this Company

Manufacturer:

Goetze KG Armaturen

Company Name

Goetze KG Armaturen

Address

Robert-Mayer-Str. 21 Ludwigsburg

Postcode

71636

Country

Germany

Phone

+49 7141 488 94 678

General Email

d.braun@goetze.de

View All Listings by this Company

Manufacturer:

Goetze KG Armaturen

Company Name

Goetze KG Armaturen

Address

Robert-Mayer-Str. 21 Ludwigsburg

Postcode

71636

Country

Germany

Phone

+49 7141 488 94 678

General Email

d.braun@goetze.de

View All Listings by this Company

Range of pre-set pressure relief valves with brass or DZR brass bodies and EPDM diaphragms. The valves are fitted with hand operated easing gear. Pre-set pressure 3.0 bar for all models. Maximum operating temperature 85°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

251008701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Caleffi logo, flow arrow, PN and size on the body. CR on DZR brass version.

Installation Requirements:

R001 R200

Expiry date:

31/10/2030

Proviso:

For closed circuit use only.

Model:

A312012 CST 19.9 mm manifold fast fit x ½” BSP (F), A312400 CST 17.6 mm manifold fast fit x ½ BSP (F), A312401 CST 19.9 mm manifold fast fit x ½” BSP (F), A312413 WSC 19.8 mm manifold fast fit x ½” BSP (F), A312414 CST 19.9 mm manifold fast fit x ½ BSP (M), A312420 CST 22 mm manifold fast fit, A312420 OEM 22 mm manifold fast fit x ½” BSP (F), A312430 CST ½” BSP (M) x ½” BSP (M), A312438 CST 19.9 mm manifold fast fit x ½” BSP (M), A312439 CST 19.9 mm manifold fast fit x ½” BSP (F) (DZR), A314402 BSC ½” BSP (M) x ½” BSP (F), A314437 CST ½” BSP (M) x 15mm compression, A313001 FRQ 17 mm manifold fast fit, A314432 CST ½” BSP (M) x ½” BSP (F).

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250404711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of inline brass bodied or chrome plated brass bodied spherical valves, with a chrome plated brass ball and EPDM ‘O’-rings. SVB66MB and SV44MB models are lever operated. SV66MBC and SVT64MBC are screwdriver operated. The products are for use with PE-X pipe (manufactured to BS 7291-3), PB pipe (manufactured to BS 7291-2) and copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Cold water use only. From March 2026: Maximum operating temperature 65°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250915006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Twistloc company logo (‘TLC’) and size on collet. SVB66MB and SVB44MB models are also marked with size and PN on the body, and Twistloc on the lever. (Twistloc is a brand of SNC Corporation).

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

SVB66MB (Ball valve): 15mm pushfit x 15mm pushfit, SVB44MB (Ball valve): 22mm pushfit x 22mm pushft, SV66MBC (lsolating valve) (chrome plated): 15mm pushft x 15mm pushft, SVT64MBC (Isolating valve) (chrome plated): 15mm pushfit x ½ BSP captive nut.

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Range of inline plastic bodied screw down stop valves incorporating a non-rising spindle headwork with a dome type operating member. The products are for use with PE-X pipe (manufactured to BS 7291-3) and copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Cold water use only. From March 2026: Maximum operating temperature 65°C.

Section:

2320 Valves

Section Subtitle:

Stop, plastic, screw down.

WRAS Approval Number:

250915007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Twistloc company logo (‘TLC’) and size on collet, (Twistloc is a brand of SNC Corporation). DM and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

SVSC6766M: 15mm pushfit x 15mm pushfit, SVSC6744M: 22mm pushfit x 22mm pushfit.

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

'Burasil Universal 9544/U'. Green coloured NBR/fibre gasket material manufactured by calandering. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

250155079

Expiry date:

31/01/2030

Approval Holder:

EagleBurgmann Germany GmbH & Co. KG

Company Name

EagleBurgmann Germany GmbH & Co. KG

Address

Aeussere Sauerlacher Str. 6-10, D-82515 Wolfratshausen

Country

Germany

View All Listings by this Company

72401, 72501, 73401, 73501, 74401, 74501, 75401, 75501, 76401, 76501, 77401, 77501, 78401, 78501, 79401 & 79501. Range of press moulded, solid silicone rubber materials which are blue or red coloured. Shore hardness between 20 & 90. Tested in-radius size 1.0mm. for use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250655049

Expiry date:

30/06/2030

Approval Holder:

Gulf Rubber Group - Tumedei SpA

Company Name

Gulf Rubber Group - Tumedei SpA

Address

Via Bolzano 12, 38061 Ala (TN)

Country

Italy

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

260112002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2031

Model:

63198-06X. X denotes finish and can be replaced with: 01 - Chrome, 0111 - Chrome 3+, 6801 - Matt Black, 4408 - Brushed Brass, 08 - Stainless Steel, 5806 - Titanium, 0402 - Brushed Nickel PVD, 04 - Brushed Nickel, 5804 - Gun Metal.

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Section:

0531 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

Wall Mounted Supplied with offset unions Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

30/06/2030

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall Mounted Concealed Undefinable Air Gap – See IRN’s Incorporates a check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Product Identification(s) with an * as suffix = models added 11/08/2025

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall mounted. Two-way diverter valve. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Address

XUANMEN INDUSTRIAL ZONE YUHUAN CHINA

Country

CHINA

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Range of in-line, non-verifiable single check valve assemblies with DZR brass bodies and spring loaded, resilient trim check valve cartridges. For use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

250702729

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm compression

Marking:

TS logo, CR, size and flow arrow on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

82559 44278

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Plastic body/bodies Incorporates a open/close function

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/01/2031

Notes & Further Information

Model D25-2 and D39 are diverter with open/close function

Approval Holder:

Ningbo Wanhai Cartridge Technology Co. Ltd.

Company Name

Ningbo Wanhai Cartridge Technology Co. Ltd.

Address

Xiachen Development Zone, Chunhu, Fenghua

Country

Zhejiang, China

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless-steel braided PEX lined flexible inlet hoses Capable of AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R009 R010 R005

Expiry date:

31/10/2030

Approval Holder:

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Company Name

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Address

No.57, Sijiu Road, Zhishan Town, Heshan City, Guangdong

Country

China

General Email

2894475300@qq.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK 3 Some models are supplied with either a pop-up or click type waste, although these have not been verified by test. Supplied with PEX lined PA braided connection hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

28/02/2031

Notes & Further Information

Where xx0 denotes the surface finish. It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck mounted. Stainless-steel braided & PEX lined EPDM inlet hoses. Capable of achieving AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

28/02/2031

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE

Single hole, single outlet (swivel) combination tap assemblies, chrome finish(chromium plated brass), with a non-rising spindle and cross-top operating member(models 49944 & 88081) or ceramic disc headwork with lever type operating members(model 26251). The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

251114304

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

'ebb+flo' on base of tap body

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2030

Model:

49944, 88081 & 26251

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2030

Notes & Further Information

X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Lever or Dome type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted Stainless Steel and Polyamide braided inlet hoses Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2030

Notes & Further Information

All surface finishes are not in contact with drinking water. The product structure (schedule of materials) of all versions are identical. Surface finish / color explanation: CHR - Chrome ANT - Anthracite BLA - Black Matt SGW - Silgranite White VGR - Volcano Grey SOW - Soft White

Approval Holder:

BLANCO GmbH + Co KG

Company Name

BLANCO GmbH + Co KG

Address

Flehinger Strasse 59 Oberderdingen

Postcode

75038

Country

Germany

General Email

certification-water@blanco.de

View All Listings by this Company

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted Stainless Steel and Polyamide braided, PE lined inlet hoses Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

28/02/2031

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Xiamen Lota International Co., Ltd.

Section:

0471 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout incorporating a manual diverter to a shower outlet.

Floor Mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R020

Expiry date:

31/10/2030

Approval Holder:

Guangdong Weixiang Sanitary Ware Co., Ltd.

Company Name

Guangdong Weixiang Sanitary Ware Co., Ltd.

Address

No. 221 jiaxing North Road, industrial Zone, Shuikou Town

Country

Kaiping City,

View All Listings by this Company

Manufacturers:

Guangdong Weixiang Sanitary Ware Co., Ltd

Section:

0570 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a double outlet and a swivel spout.

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2031

Notes & Further Information

Note - Both Products are the same, one is wall mounted, one is deck mounted.

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0570 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a double outlet and a swivel spout.

Deck Mounted. Capable of achieving AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

30/11/2030

Approval Holder:

MVI Hazel Ltd.

Company Name

MVI Hazel Ltd.

Address

1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck mounted. Stainless steel braided TPSiV lined inlet hoses. Stainless steel braided TPSiV lined connection hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R007 R010

Expiry date:

30/11/2030

Notes & Further Information

Finishes available: Brass, Chrome, Nickel, Burnished Brass, Burnished Nickel, Matte Nickel, Copper, Dark Brass, Dark Nickel, Vintage Brass, Gold, Matte Gold.

Approval Holder:

In Compliance GmbH

Company Name

In Compliance GmbH

Address

Kathe-Kollwitz-Ring 5a Unna

Postcode

59423

Country

Germany

General Email

jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *‐KJ600304 and *-KJ600316 stainless steel pipes. The "KJ6278" prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

KONJOY, size, WRAS and material grade on fitting body. WRAS, KONJOY, size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: KJ625015005: 15×Rp½. KJ625018005: 18×Rp½. KJ625022075: 22×Rp¾. Adapter with female thread: KJ627115005: 15×Rp½. KJ627118005: 18×Rp½. KJ627122075: 22×Rp¾. KJ627128001: 28×Rp1. KJ627135125: 35×Rp1¼. KJ627142105: 42×Rp1½. KJ627154002: 54×Rp2. Bridge with plain ending: KJ608500018: 18. KJ608500022: 22. KJ608500028: 28. Cap: KJ621100015: 15. KJ621100018: 18. KJ621100022: 22. KJ621100028: 28. KJ621100035: 35. KJ621100042: 42. KJ621100054: 54. KJ621100076: 76.1. KJ621100089: 88.9. KJ621100108: 108. Elbow 45 with press ending: KJ604500015: 15. KJ604500018: 18. KJ604500015: 22. KJ604500028: 28. KJ604500035: 35. KJ604500042: 42. KJ604500054: 54. KJ604500076: 76.1. KJ604500089: 88.9. KJ604500108: 108. Elbow 45 with plain ending: KJ614500015: 15. KJ614500018: 18. KJ614500022: 22. KJ614500028: 28. KJ614500035: 35. KJ614500042: 4 KJ614500054: 54. KJ614500076: 76.1. KJ614500089: 88.9. KJ614500108 -108. Elbow 90 with press ending KJ609600015: 15. KJ609600018: 18. KJ609600022: 22. KJ609600028: 28. KJ609600035: 35. KJ609600042: 42. KJ609600054: 54. KJ609600067: 66.7. KJ609600076: 76.1. KJ609600089: 88.9. KJ609600108 -108. Elbow 90 with female thread: KJ623015005: 15×Rp½. KJ623018005: 18×Rp½. KJ623022075: 22×Rp¾. KJ623028001: 28×Rp1. KJ623035125 : 35×Rp1¼. KJ623042105: 42×Rp1½. KJ623054002: 54×Rp2. Elbow: 90 with: male thread: KJ624015005: 15×R½. KJ624018005: 18×R½. KJ624022075: 22×R¾ Elbow 90 with plain ending: KJ619100015: 15. KJ619100018: 18. KJ619100022: 22. KJ619100028: 28. KJ619100035: 35. KJ619100042: 42. KJ619100054: 54. KJ619100076: 76.1. KJ619100089: 88.9. KJ619100108: 108. Reducer coupling with plain ending: KJ624301815: 18×15. KJ624302218: 22×18. KJ624302818: 28×18. KJ624303522: 35×22. KJ624303528: 35×28. KJ624304222: 42×22. KJ624304228: 42×28. KJ624304235: 42×35. KJ624305428: 54×28. KJ624305435: 54×35. KJ624305442: 54×42. Reducer coupling with press ending: KJ624401815: 18×15. KJ624402215: 22×15. KJ624402218: 22×18. KJ624402815: 28×15. KJ624402818: 28×18. KJ624402822: 28×22. KJ624403515: 35×15. KJ624403518: 35×18. KJ624403522: 35×22. KJ624403528: 35×28. KJ624404215: 42×15. KJ624404218: 42×18. KJ624404222: 42×22. KJ624404228: 42×28. KJ624404235: 42×35. KJ624405415: 54×15. KJ624405418: 54×18. KJ624405422: 54×22. KJ624405428: 54×28. KJ624405435: 54×35. KJ624405442: 54×42. KJ624406735: 66.7×35. KJ624406754: 66.7×54. KJ624407654: 76.1×54. KJ624408954: 88.9×54. KJ624408976: 88.9×76.1. KJ624410854: 108×54. KJ624410876: 108×76.1. KJ624410889: 108×88.9. Reducer Tee with press ending: KJ613301815: 18×15×18. KJ613302215: 22×15×22. KJ613302218: 22×18×22. KJ613302815: 28×15×28. KJ613302818: 28×18×28. KJ613302822: 28×22×28. KJ613303522: 35×22×35. KJ613303528: 35×28×35. KJ613304222: 42×22×42. KJ613304228: 42×28×42. KJ613304235: 42×35×42. KJ613305422: 54×22×54. KJ613305428: 54×28×54. KJ613305435: 54×35×54. KJ613305442: 54×42×54. KJ613307642: 76.1×42×76.1. KJ613307654: 76.1×54×76.1. KJ613308954: 88.9×54×88.9 KJ613310854: 108×54×108. KJ613310876: 108×76.1×108. KJ613310889: 108×88.9×108 Equal coupling with press ending: KJ623700015: 15. KJ623700018: 18. KJ623700022: 22 KJ623700028: 28. KJ623700035: 35. KJ623700042: 42. KJ623700054: 54. KJ623700067: 66.7. KJ623700076: 76.1. KJ623700089: 88.9. KJ623700108: 108 Adapter with male thread: KJ627215005: 15×R½. KJ627218005: 18×R½. KJ627218075: 18×R¾. KJ627222005: 22×R½. KJ627222075: 22×R¾. KJ627228001: 28×R1. KJ627235125: 35×R1¼. KJ627242105: 42×R1½. KJ627254002: 54×R2. KJ627276205: 76.1×R2½. KJ627289003: 88.9×R3. Slip coupling with press ending: KJ627100015: 15. KJ627100018: 18. KJ627100022: 22. KJ627100028: 28. KJ627100035: 35. KJ627100042: 42 KJ627100054: 54. Tee with press ending: KJ613012015: 15. KJ613012018: 18. KJ613012022: 22. KJ613012028: 28. KJ613012035: 35. KJ613012042: 42. KJ613012054: 54. KJ613012076: 76.1. KJ613012089: 88.9. KJ613012108: 108. Tee with male thread: KJ613815005: 15×R½. KJ613818005: 18×R½. KJ613822005: 22×R½. KJ613822075: 22×R¾. KJ613828005: 28×R½. KJ613828075: 28×R¾. KJ613828001: 28×R1. KJ613835105: 35×R½. KJ613835125: 35×R1¼. KJ613842125: 42×R1¼. KJ613854105: 54×R1½. KJ613854002: 54×R2. Tee with female thread:: KJ613915005: 15×Rp½. KJ613918005: 18×Rp½. KJ613922005: 22×Rp½. KJ613922075: 22×Rp¾. KJ613928005: 28×R½. KJ613928075: 28×Rp¾. KJ613928001: 28×Rp1. KJ613935005: 35×Rp½. KJ613935125: 35×Rp1¼. KJ613942125: 42×Rp1¼. KJ613954105: 54×1½. KJ613954002: 54×Rp2. Adaptor with union nut: KJ627815005: 15×G½. KJ627818005: 18×G½. KJ627818075: 18×G¾. KJ627822005: 22×G½. KJ627822075: 22×G¾. KJ627822001: 22×G1. KJ627828001: 28×G1. KJ627835125: 35×G1¼. KJ627842175: 42×G1¾. KJ627854002: 54×G2. Stainless steel pipe (SS304 or SS316L): *‐KJ600304 (SS304) *-KJ600316 (SS316L) Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Approval Holder:

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Company Name

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Address

1st Floor, No. 222, Binhai Industrial Zone, 2nd Road, Xinghai Sub‐district, Longwan District, Wenzhou, Zhejiang

Country

China

Phone

0086‐577‐86896059

General Email

info@konjoy‐tech.com

View All Listings by this Company

Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251188701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

14mm

Marking:

Manufacturers name or trademark “U” and size on fitting. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

1058085 Uponor Uni-C compression adapter MLC 1013894 UPONOR UNI‐C COUPLING PLATED MLC 1014513 UPONOR S‐PRESS ADAPTER MALE THREAD 1014515 UPONOR S‐PRESS ADAPTER FEMALE THREAD 1014886 UPONOR S‐PRESS TEE 1015154 UPONOR S‐PRESS COUPLING 1015437 Uponor S-Press tap elbow 1133445 Uponor S-Press elbow 1133446 Uponor S-Press tap elbow twin 90deg long 1014654 Uponor SMART AQUA ELBOW ADAPTER S‐PRESS 1014511 UPONOR S‐PRESS ADAPTER 1013366 Uponor Uni Pipe PLUS white 1013577 Uponor Uni Pipe PLUS white insulated 1013678 Uponor Uni Pipe PLUS white in conduit 1160885 Uponor Uni Pipe PLUS white insulated

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Numepress' stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.

Marking:

ISOTUBI SL LOGO, Numepress and size on fitting body. ISOTUBI, Numepress, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

F01 Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F02 Slip Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F03 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F04 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F05 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F06 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F07 Female Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F08 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F09 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 F10 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 F12 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 F14 Reducer from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F15 Reducing tee from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F16 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F17 Female adaptor from 15 3/ 8" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 F18 M ale adaptor from 15 3/8" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F19 Flanges adaptor from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F20 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F21 Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F22 Air tuve Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F23 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F24 3 Pieces adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F25 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F26 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F27 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 Material 1.4401/1.4404 & 1.4301/1.4307 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 F37 Male threaded cross from 15 1/2" to 108-4" Material 1.4401/1.4404 & 1.4301/1.4307 F38 Female threaded cross from 15 1/ 2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F39 90Q Male angle adaptor from 15 3/8" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F42 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F43 Grooved Transition from 3/4" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F44 Van Stone flange from 1/2" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F45 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 F46 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F47 Half coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F48 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F49 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F50 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F51 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F53 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F54 Male plug from 16 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F55 Weld Adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F56 75Q Female -Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F57 l0Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F58 60Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F59 lSQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 Material 1.4401/1.4404 & 1.4301/1.4307 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 Material 1.4401/1.4404 & 1.4301/1.4307 F63 7SQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F64 15Q Male -female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F65 Male-Female pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F66 30Q Male-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F72 45Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm, Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

Manufacturer:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

Fastwarm range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404080

Size:

see models

Marking:

FASTWARM, size & underfloor heating on fitting.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: FW-KM101-S1515 15mm FW-KM101-S2222 22mm FW-KM101-S2828 28mm FW-KM101-S3535 35mm FW-KM101-S4242 42mm FW-KM101-S5454 54mm FW-KM101-S6767 66.7mm FW-KM101-S7676 76.1mm FW-KM101-S8989 88.9mm FW-KM101-S108108 108mm SLIP COUPLING C x C: FW-KML102-S1515 15mm FW-KML102-S2222 22mm FW-KML102-S2828 28mm FW-KML102-S3535 35mm FW-KML102-S4242 42mm FW-KML102-S5454 54mm FW-KML102-S6767 66.7mm FW-KML102-S7676 76.1mm FW-KML102-S8989 88.9mm FW-KML102-S108108 108mm REDUCING COUPLING C x C: FW-KM107-S2215 22mm x 15mm FW-KM107-S2815 28mm x 15mm FW-KM107-S2822 28mm x 22mm FW-KM107-S3515 35mm x 15mm FW-KM107-S3522 35mm x 22mm FW-KM107-S3528 35mm x 28mm FW-KM107-S4215 42mm x 15mm FW-KM107-S4222 42mm x 22mm FW-KM107-S4228 42mm x 28mm FW-KM107-S4235 42mm x 35mm FW-KM107-S5422 54mm x 22mm FW-KM107-S5428 54mm x 28mm FW-KM107-S5435 54mm x 35mm FW-KM107-S5442 54mm x 42mm FW-KM107-S6728 66.7mm x 28mm FW-KM107-S6735 66.7mm x 35mm FW-KM107-S6742 66.7mm x 42mm FW-KM107-S6754 66.7mm x 54mm FW-KM107-S7635 76.1mm x 35mm FW-KM107-S7642 76.1mm x 42mm FW-KM107-S7654 76.1mm x 54mm FW-KM107-S7667 76.1mm x 66.7mm FW-KM107-S8942 88.9mm x 42mm FW-KM107-S8954 88.9mm x 54mm FW-KM107-S8967 88.9mm x 66.7mm FW-KM107-S8976 88.9mm x 76.1mm FW-KM107-S10842 108mm x 42mm FW-KM107-S10854 108mm x 54mm FW-KM107-S10867 108mm x 66.7mm FW-KM107-S10876 108mm x 76.1mm FW-KM107-S10889 108mm x 88.9mm FITTING REDUCER F x C: FW-KM108-S2215 22mm x 15mm FW-KM108-S2815 28mm x 15mm FW-KM108-S2822 28mm x 22mm FW-KM108-S3515 35mm x 15mm FW-KM108-S3522 35mm x 22mm FW-KM108-S3528 35mm x 28mm FW-KM108-S4215 42mm x 15mm FW-KM108-S4222 42mm x 22mm FW-KM108-S4228 42mm x 28mm FW-KM108-S4235 42mm x 35mm FW-KM108-S5415 54mm x 15mm FW-KM108-S5422 54mm x 22mm FW-KM108-S5428 54mm x 28mm FW-KM108-S5435 54mm x 35mm FW-KM107-S5415 54mm x 15mm FW-KM108-S5442 54mm x 42mm FW-KM108-S6728 66.7mm x 28mm FW-KM108-S6735 66.7mm x 35mm FW-KM108-S6742 66.7mm x 42mm FW-KM108-S6754 66.7mm x 54mm FW-KM108-S7635 76.1mm x 35mm FW-KM108-S7642 76.1mm x 42mm FW-KM108-S7654 76.1mm x 54mm FW-KM108-S7667 76.1mm x 66.7mm FW-KM108-S8942 88.9mm x 42mm FW-KM108-S8954 88.9mm x 54mm FW-KM108-S8967 88.9mm x 66.7mm FW-KM108-S8976 88.9mm x 76.1mm FW-KM108-S10842 108mm x 42mm FW-KM108-S10854 108mm x 54mm FW-KM108-S10867 108mm x 66.7mm FW-KM108-S10876 108mm x 76.1mm FW-KM108-S10889 108mm x 88.9mm 90DEG ELBOW C x C: FW-KM103-L1515 15mm FW-KM103-L2222 22mm FW-KM103-L2828 28mm FW-KM103-L3535 35mm FW-KM103-L4242 42mm FW-KM103-L5454 54mm FW-KM103-L6767 66.7mm FW-KM103-L7676 76.1mm FW-KM103-L8989 88.9mm FW-KM103-L108108 108mm 90DEG STREET ELBOW F x C: FW-KM104-L1515 15mm FW-KM104-L2222 22mm FW-KM104-L2828 28mm FW-KM104-L3535 35mm FW-KM104-L4242 42mm FW-KM104-L5454 54mm FW-KM104-L6767 66.7mm FW-KM104-L7676 76.1mm FW-KM104-L8989 88.9mm FW-KM104-L108108 108mm 45DEG ELBOW C x C: FW-KM105-L1515 15mm FW-KM105-L2222 22mm FW-KM105-L2828 28mm FW-KM105-L3535 35mm FW-KM105-L4242 42mm FW-KM105-L5454 54mm FW-KM105-L6767 66.7mm FW-KM105-L7676 76.1mm FW-KM105-L8989 88.9mm FW-KM105-L108108 108mm 45DEG STREET ELBOW F x C: FW-KM106-L1515 15mm FW-KM106-L2222 22mm FW-KM106-L2828 28mm FW-KM106-L3535 35mm FW-KM106-L4242 42mm FW-KM106-L5454 54mm FW-KM106-L6767 66.7mm FW-KM106-L7676 76.1mm FW-KM106-L8989 88.9mm FW-KM106-L108108 108mm CAP C x C: FW-KM111-D1515 15mm FW-KM111-D2222 22mm FW-KM111-D2828 28mm FW-KM111-D3535 35mm FW-KM111-D4242 42mm FW-KM111-D5454 54mm FW-KM111-D6767 66.7mm FW-KM111-D7676 76.1mm FW-KM111-D8989 88.9mm FW-KM111-D108108 108mm EQUAL TEE C x C: FW-KM109-T151515 15mm FW-KM109-T222222 22mm FW-KM109-T282828 28mm FW-KM109-T353535 35mm FW-KM109-T424242 42mm FW-KM109-T545454 54mm FW-KM109-T676767 66.7mm FW-KM109-T767676 76.1mm FW-KM109-T898989 88.9mm FW-KM109-T108108108 108mm PART CROSSOVER F x C: FW-KM113-L1515 15mm FW-KM113-L2222 22mm CROSSOVER C x C: FW-KM112-S1515 15mm FW-KM112-S2222 22mm REDUCER ELBOW FW-KM103-L2215 22mm x 15mm FW-KM103-L2815 28mm x 15mm FW-KM103-L2822 28mm x 22mm REDUCING TEE: FW-KM110-T221515 22mm x 15mm x 15mm FW-KM110-T222215 22mm x 22mm x 15mm FW-KM110-T282222 28mm x 22mm x 22mm FW-KM110-T282822 28mm x 28mm x 22mm FW-KM110-T281522 28mm x 15mm x 22mm FW-KM110-T282815 28mm x 28mm x 15mm FW-KM110-T352222 35mm x 22mm x 22mm FW-KM110-T353522 35mm x 35mm x 22mm FW-KM110-T353528 35mm x 35mm x 28mm FW-KM110-T423535 42mm x 35mm x 35mm FW-KM110-T152215 15mm x 22mm x 15mm FW-KM110-T222822 22mm x 28mm x 22mm FW-KM110-T221522 22mm x 15mm x 22mm FW-KM110-T281528 28mm x 15mm x 28mm FW-KM110-T282228 28mm x 22mm x 28mm FW-KM110-T351535 35mm x 15mm x 35mm FW-KM110-T352235 35mm x 22mm x 35mm FW-KM110-T352835 35mm x 28mm x 35mm FW-KM110-T421542 42mm x 15mm x 42mm FW-KM110-T422242 42mm x 22mm x 42mm FW-KM110-T422842 42mm x 28mm x 42mm FW-KM110-T423542 42mm x 35mm x 42mm FW-KM110-T541554 54mm x 15mm x 54mm FW-KM110-T542254 54mm x 22mm x 54mm FW-KM110-T542854 54mm x 28mm x 54mm FW-KM110-T543554 54mm x 35mm x 54mm FW-KM110-T544254 54mm x 42mm x 54mm FW-KM110-T672867 66.7mm x 28mm x 66.7mm FW-KM110-T673567 66.7mm x 35mm x 66.7mm FW-KM110-T674267 66.7mm x 42mm x 66.7mm FW-KM110-T675467 66.7mm x 54mm x 66.7mm FW-KM110-T762276 76.1mm x 22mm x 76.1mm FW-KM110-T762876 76.1mm x 28mm x 76.1mm FW-KM110-T763576 76.1mm x 35mm x 76.1mm FW-KM110-T764276 76.1mm x 42mm x 76.1mm FW-KM110-T765476 76.1mm x 54mm x 76.1mm FW-KM110-T766776 76.1mm x 66.7mm x 76.1mm FW-KM110-T894289 88.9mm x 42mm x 88.9mm FW-KM110-T895489 88.9mm x 54mm x 88.9mm FW-KM110-T896789 88.9mm x 66.7mm x 88.9mm FW-KM110-T897689 88.9mm x 76.1mm x 88.9mm FW-KM110-T10854108 108mm x 54mm x 108mm FW-KM110-T10867108 108mm x 66.7mm x 108mm FW-KM110-T10876108 108mm x 76.1mm x 108mm FW-KM110-T10889108 108mm x 88.9mm x 108mm

Approval Holder:

Fastwarm Limited

Company Name

Fastwarm Limited

Address

Unit 13 Carnival Park Basildon Essex

Postcode

SS14 3WN

Phone

01228 744 479

General Email

support@fastwarm.com

View All Listings by this Company

Range of brass compression fittings for use with copper pipes (manufactured to EN 1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

251015005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

‘EAGLE’ (brand of SCE TECHNOLOGY (NINGBO) CO., LTD) and size on nut or body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

6301 series - Straight Coupling C x C: 6301-B: 8mmx8mm, 6301-0: 10mmx10mm, 6301-C: 12mmx12mm, 6301-1: 15mmx15mm, 6301-F: 18mmx18mm, 6301-2: 22mmx22mm, 6301-3: 28mmx28mm, 6301-4: 35mmx35mm, 6301-5: 42mmx42mm, 6301-6: 54mmx54mm, 6301-0B: 10mmx8mm, 6301-C0: 12mmx10mm, 6301-1B: 15mmx8mm, 6301-10: 15mmx10mm, 6301-1C: 15mmx12mm, 6301-FC: 18mmx12mm, 6301-F1: 18mmx15mm, 6301-21: 22mmx15mm, 6301-2F: 22mmx18mm, 6301-31: 28mmx15mm, 6301-32: 28mmx22mm, 6301-41: 35mmx15mm, 6301-42: 35mmx22mm, 6301-43: 35mmx28mm, 6301-51: 42mmx15mm, 6301-52: 42mmx22mm, 6301-53: 42mmx28mm, 6301-54: 42mmx35mm, 6301-61: 54mmx15mm, 6301-62: 54mmx22mm, 6301-63: 54mmx28mm, 6301-64: 54mmx35mm, 6301-65: 54mmx42mm. 6302 series - Straight Coupling C x MI: 6302-B: 8mm x BSP 1/4" M, 6302-0: 10mm x BSP 3/8" M, 6302-1: 15mm x BSP 1/2" M, 6302-2: 22mm x BSP 3/4" M, 6302-3: 28mm x BSP 1" M, 6302-4: 35mm x BSP 1 1/4" M, 6302-5: 42mm x BSP 1 1/2" M, 6302-6: 54mm x BSP 2" M, 6302-B0: 8mm x BSP 3/8" M, 6302-B1: 8mm x BSP 1/2" M, 6302-0B: 10mm x BSP 1/4" M, 6302-01: 10mm x BSP 1/2" M, 6302-C0: 12mm x BSP 3/8" M, 6302-C1: 12mm x BSP 1/2" M, 6302-1B: 15mm x BSP 1/4" M, 6302-10: 15mm x BSP 3/8" M, 6302-12: 15mm x BSP 3/4" M, 6302-13: 15mm x BSP 1" M, 6302-F1: 18mm x BSP 1/2" M, 6302-F2: 18mm x BSP 3/4" M, 6302-21: 22mm x BSP 1/2" M, 6302-23: 22mm x BSP 1" M, 6302-31: 28mm x BSP 1/2" M, 6302-32: 28mm x BSP 3/4" M, 6302-34: 28mm x BSP 1 1/4" M, 6302-35: 28mm x BSP 1 1/2" M, 6302-43: 35mm x BSP 1" M, 6302-45: 35mm x BSP 1 1/2" M, 6302-46: 35mm x BSP 2" M, 6302-51: 42mm x BSP 1/2" M, 6302-52: 42mm x BSP 3/4" M, 6302-53: 42mm x BSP 1" M, 6302-54: 42mm x BSP 1 1/4" M, 6302-56: 42mm x BSP 2" M, 6302-65: 54mm x BSP 1 1/2" M. 6302F series - Straight Coupling with Flange C x MI: 6302F-1: 15mm x BSP 1/2" M, 6302F-2: 22mm x BSP 3/4" M, 6302F-3: 28mm x BSP 1" M, 6302F-4: 35mm x BSP 1 1/4" M, 6302F-5: 42mm x BSP 1 1/2" M, 6302F-6: 54mm x BSP 2" M. 6302LB series - Straight Coupling with Extension Tail and Backnut C x MI: 6302LB-1: 15mm x BSP 1/2" M, 6302LB-2: 22mm x BSP 3/4" M, 6302LB-3: 28mm x BSP 1" M, 6302LB-4: 35mm x BSP 1 1/4" M, 6302LB-5: 42mm x BSP 1 1/2" M, 6302LB-6: 54mm x BSP 2" M. 6302T series - Straight Coupling C x MI Taper Threaded to ISO7-1: 6302T-1: 15mm x R 1/2", 6302T-2: 22mm x R 3/4", 6302T-3: 28mm x R 1", 6302T-12: 15mm x R 3/4", 6302T-23: 22mm x R 1". 6303 series - Straight Coupling C x FI: 6303-B: 8mm x BSP 1/4" F, 6303-0: 10mm x BSP 3/8" F, 6303-1: 15mm x BSP 1/2" F, 6303-2: 22mm x BSP 3/4" F, 6303-3: 28mm x BSP 1" F, 6303-4: 35mm x BSP 1 1/4" F, 6303-5: 42mm x BSP 1 1/2" F, 6303-6: 54mm x BSP 2" F, 6303-B0: 8mm x BSP 3/8" F, 6303-B1: 8mm x BSP 1/2" F, 6303-0B: 10mm x BSP 1/4" F, 6303-01: 10mm x BSP 1/2" F, 6303-C0: 12mm x BSP 3/8" F, 6303-C1: 12mm x BSP 1/2" F, 6303-1B: 15mm x BSP 1/4" F, 6303-10: 15mm x BSP 3/8" F, 6303-12: 15mm x BSP 3/4" F, 6303-13: 15mm x BSP 1" F, 6303-F1: 18mm x BSP 1/2" F, 6303-F2: 18mm x BSP 3/4" F, 6303-21: 22mm x BSP 1/2" F, 6303-23: 22mm x BSP 1" F, 6303-31: 28mm x BSP 1/2" F, 6303-32: 28mm x BSP 3/4" F, 6303-34: 28mm x BSP 1 1/4" F, 6303-43: 35mm x BSP 1" F. 6303SW series - Straight Swivel Coupling C x FI: 6303SW-1: 15mm x BSP 1/2" F, 6303SW-2: 22mm x BSP 3/4" F, 6303SW-12: 15mm x BSP 3/4" F, 6303SW-21: 22mm x BSP 1/2" F. 6303T series -Straight Coupling C x FI: 6303T-1: 15mm x Rc 1/2", 6303T-2: 22mm x Rc 3/4", 6303T-3: 28mm x Rc 1", 6303T-12: 15mm x Rc 3/4". 6321 series - Tank Connector: 6321-1: 15mm, 6321-2: 22mm, 6321-3: 28mm, 6321-4: 35mm, 6321-5: 42mm, 6321-6: 54mm. 6323 series - Stop End: 6323-B: 8mm, 6323-0: 10mm, 6323-C: 12mm, 6323-1: 15mm, 6323-F: 18mm, 6323-2: 22mm, 6323-3: 28mm, 6323-4: 35mm, 6323-5: 42mm, 6323-6: 54mm. 6401 series - 90°Elbow C x C: 6401-B: 8mmx8mm, 6401-0: 10mmx10mm, 6401-C: 12mmx12mm, 6401-1: 15mmx15mm, 6401-F: 18mmx18mm, 6401-2: 22mmx22mm, 6401-3: 28mmx28mm, 6401-4: 35mmx35mm, 6401-5: 42mmx42mm, 6401-6: 54mmx54mm, 6401-C0: 12mmx10mm, 6401-10: 15mmx10mm, 6401-1C: 15mmx12mm, 6401-FC: 18mmx12mm, 6401-F1: 18mmx15mm, 6401-21: 22mmx15mm, 6401-2F: 22mmx18mm, 6401-31: 28mmx15mm, 6401-32: 28mmx22mm, 6401-41: 35mmx15mm, 6401-42: 35mmx22mm, 6401-43: 35mmx28mm, 6401-51: 42mmx15mm, 6401-52: 42mmx22mm, 6401-53: 42mmx28mm, 6401-54: 42mmx35mm, 6401-61: 54mmx15mm, 6401-62: 54mmx22mm, 6401-63: 54mmx28mm, 6401-64: 54mmx35mm, 6401-65: 54mmx42mm. 6401E series - 45°Elbow C x C: 6401E-1: 15mmx15mm, 6401E-2: 22mmx22mm, 6401E-3: 28mmx28mm. 6402 series - 90°Elbow C x MI: 6402-B: 8mm x BSP 1/4" M, 6402-0: 10mm x BSP 3/8" M, 6402-1: 15mm x BSP 1/2" M, 6402-2: 22mm x BSP 3/4" M, 6402-3: 28mm x BSP 1" M, 6402-4: 35mm x BSP 1 1/4" M, 6402-5: 42mm x BSP 1 1/2" M, 6402-6: 54mm x BSP 2" M, 6402-B0: 8mm x BSP 3/8" M, 6402-01: 10mm x BSP 1/2" M, 6402-C0: 12mm x BSP 3/8" M, 6402-C1: 12mm x BSP 1/2" M, 6402-10: 15mm x BSP 3/8" M, 6402-12: 15mm x BSP 3/4" M, 6402-F1: 18mm x BSP 1/2" M, 6402-F2: 18mm x BSP 3/4" M, 6402-21: 22mm x BSP 1/2" M, 6402-23: 22mm x BSP 1" M, 6402-31: 28mm x BSP 1/2" M, 6402-32: 28mm x BSP 3/4" M, 6402-41: 35mm x BSP 1/2" M, 6402-42: 35mm x BSP 3/4" M, 6402-43: 35mm x BSP 1" M, 6402-51: 42mm x BSP 1/2" M, 6402-52: 42mm x BSP 3/4" M, 6402-53: 42mm x BSP 1" M, 6402-63: 54mm x BSP 1" M. 6402T series - 90°Elbow C x MI Taper Threaded to ISO 7-1: 6402T-1: 15mm x R 1/2", 6402T-2: 22mm x R 3/4", 6402T-3: 28mm x R 1", 6402T-12: 15mm x R 3/4", 6402T-23: 22mm x R 1". 6403 series - 90°Elbow C x FI: 6403-B: 8mm x BSP 1/4" F, 6403-0: 10mm x BSP 3/8" F, 6403-1: 15mm x BSP 1/2" F, 6403-2: 22mm x BSP 3/4" F, 6403-3: 28mm x BSP 1" F, 6403-4: 35mm x BSP 1 1/4" F, 6403-5: 42mm x BSP 1 1/2" F, 6403-6: 54mm x BSP 2" F, 6403-01: 10mm x BSP 1/2" F, 6403-C0: 12mm x BSP 3/8" F, 6403-C1: 12mm x BSP 1/2" F, 6403-10: 15mm x BSP 3/8" F, 6403-12: 15mm x BSP 3/4" F, 6403-F1: 18mm x BSP 1/2" F, 6403-F2: 18mm x BSP 3/4" F, 6403-21: 22mm x BSP 1/2" F, 6403-23: 22mm x BSP 1" F, 6403-32: 28mm x BSP 3/4" F, 6403-41: 35mm x BSP 1/2" F, 6403-42: 35mm x BSP 3/4" F, 6403-43: 35mm x BSP 1" F, 6403-45: 35mm x BSP 1 1/2" F. 6403SW series - Swivel Elbow C x FI: 6403SW-1: 15mm x BSP 1/2" F, 6403SW-2: 22mm x BSP 3/4" F. 6403T series - 90°Elbow C x FI Taper Threaded to ISO 7-1: 6403T-1: 15mm x Rc 1/2", 6403T-2: 22mm x Rc 3/4", 6403T-3: 28mm x Rc 1", 6403T-12: 15mm x Rc 3/4", 6403T-23: 22mm x Rc 1". 6403WE series - Wallplate Elbow : 6403WE-1-2H: 15mm x BSP 1/2" F, 6403WE-1-3H: 15mm x BSP 1/2" F, 6403WE-2-3H: 22mm x BSP 3/4" F, 6403WE-12-3H: 15mm x BSP 3/4" F, 6403WE-F1-3H: 18mm x BSP 1/2" F, 6403WE-F2-3H: 18mm x BSP 3/4" F, 6403WE-21-3H: 22mm x BSP 1/2" F. 6601 series - Tee C x C x C: 6601-B: 8mmx8mmx8mm, 6601-0: 10mmx10mmx10mm, 6601-C: 12mmx12mmx12mm, 6601-1: 15mmx15mmx15mm, 6601-F: 18mmx18mmx18mm, 6601-2: 22mmx22mmx22mm, 6601-3: 28mmx28mmx28mm, 6601-4: 35mmx35mmx35mm, 6601-5: 42mmx42mmx42mm, 6601-6: 54mmx54mmx54mm, 6601-001: 10mmx10mmx15mm, 6601-C00: 12mmx10mmx10mm, 6601-C0C: 12mmx10mmx12mm, 6601-CC0: 12mmx12mmx10mm, 6601-CC1: 12mmx12mmx15mm, 6601-100: 15mmx10mmx10mm, 6601-10C: 15mmx10mmx12mm, 6601-101: 15mmx10mmx15mm, 6601-1C0: 15mmx12mmx10mm, 6601-1CC: 15mmx12mmx12mm, 6601-1C1: 15mmx12mmx15mm, 6601-110: 15mmx15mmx10mm, 6601-11C: 15mmx15mmx12mm, 6601-112: 15mmx15mmx22mm, 6601-113: 15mmx15mmx28mm, 6601-FCC: 18mmx12mmx12mm, 6601-FC1: 18mmx12mmx15mm, 6601-FCF: 18mmx12mmx18mm, 6601-F1C: 18mmx15mmx12mm, 6601-F11: 18mmx15mmx15mm, 6601-F1F: 18mmx15mmx18mm, 6601-FFC: 18mmx18mmx12mm, 6601-FF1: 18mmx18mmx15mm, 6601-FF2: 18mmx18mmx22mm, 6601-211: 22mmx15mmx15mm, 6601-212: 22mmx15mmx22mm, 6601-2FF: 22mmx18mmx18mm, 6601-2F2: 22mmx18mmx22mm, 6601-22C: 22mmx22mmx12mm, 6601-221: 22mmx22mmx15mm, 6601-22F: 22mmx22mmx18mm, 6601-223: 22mmx22mmx28mm, 6601-311: 28mmx15mmx15mm, 6601-312: 28mmx15mmx22mm, 6601-313: 28mmx15mmx28mm, 6601-321: 28mmx22mmx15mm, 6601-322: 28mmx22mmx22mm, 6601-323: 28mmx22mmx28mm, 6601-331: 28mmx28mmx15mm, 6601-332: 28mmx28mmx22mm, 6601-441: 35mmx35mmx15mm, 6601-442: 35mmx35mmx22mm, 6601-443: 35mmx35mmx28mm, 6601-551: 42mmx42mmx15mm, 6601-552: 42mmx42mmx22mm, 6601-553: 42mmx42mmx28mm, 6601-554: 42mmx42mmx35mm, 6601-661: 54mmx54mmx15mm, 6601-662: 54mmx54mmx22mm, 6601-663: 54mmx54mmx28mm, 6601-664: 54mmx54mmx35mm, 6601-665: 54mmx54mmx42mm. 6615 series - Tee C x C x MI: 6615-1: 15mmx15mm x BSP 1/2" M, 6615-2: 22mmx22mm x BSP 3/4" M, 6615-3: 28mmx28mm x BSP 1" M, 6615-4: 35mmx35mm x BSP 1 1/4" M, 6615-5: 42mmx42mm x BSP 1 1/2" M, 6615-112: 15mmx15mm x BSP 3/4" M, 6615-221: 22mmx22mm x BSP 1/2" M, 6615-223: 22mmx22mm x BSP 1" M. 6617 series - Tee C x C x FI: 6617-0: 10mmx10mm x BSP 3/8" F, 6617-1: 15mmx15mm x BSP 1/2" F, 6617-2: 22mmx22mm x BSP 3/4" F, 6617-3: 28mmx28mm x BSP 1" F, 6617-4: 35mmx35mm x BSP 1 1/4" F, 6617-5: 42mmx42mm x BSP 1 1/2" F, 6617-6: 54mmx54mm x BSP 2" F, 6617-CC0: 12mmx12mm x BSP 3/8" F, 6617-CC1: 12mmx12mm x BSP 1/2" F, 6617-112: 15mmx15mm x BSP 3/4" F, 6617-FF1: 18mmx18mm x BSP 1/2" F, 6617-FF2: 18mmx18mm x BSP 3/4" F, 6617-221: 22mmx22mm x BSP 1/2" F, 6617-223: 22mmx22mm x BSP 1" F, 6617-331: 28mmx28mm x BSP 1/2" F, 6617-332: 28mmx28mm x BSP 3/4" F, 6617-441: 35mmx35mm x BSP 1/2" F, 6617-442: 35mmx35mm x BSP 3/4" F, 6617-551: 42mmx42mm x BSP 1/2" F, 6617-661: 54mmx54mm x BSP 1/2" F. 6901 series - Cross C x C x C x C: 6901-1: 15mmx15mmx15mmx15mm, 6901-F: 18mmx18mmx18mmx18mm, 6901-2: 22mmx22mmx22mmx22mm, 6901-3: 28mmx28mmx28mmx28mm, 6901-2111: 22mmx15mmx15mmx15mm, 6901-2121: 22mmx15mmx22mmx15mm, 6901-2122: 22mmx15mmx22mmx22mm, 6901-2211: 22mmx22mmx15mmx15mm, 6901-3122: 28mmx15mmx22mmx22mm, 6901-3232: 28mmx22mmx28mmx22mm. 36301 series - Straight Coupler CxC: 36301-1: 1/2"x1/2", 36301-2: 3/4"x3/4", 36301-3: 1"x1", 36301-4: 1 1/4"x1 1/4", 36301-5: 1 1/2"x1 1/2", 36301-6: 2"x2", 36301-10: 1/2"x3/8", 36301-21: 3/4"x1/2", 36301-31: 1"x1/2", 36301-32: 1"x3/4", 36301-41: 1 1/4"x1/2", 36301-42: 1 1/4"x3/4", 36301-43: 1 1/4"x1", 36301-51: 1 1/2"x1/2", 36301-52: 1 1/2"x3/4", 36301-53: 1 1/2"x1", 36301-54: 1 1/2"x1 1/4", 36301-61: 2"x1/2", 36301-62: 2"x3/4", 36301-63: 2"x1", 36301-64: 2"x1 1/4", 36301-65: 2"x1 1/2", 36301-1B: 1/2"x1/4". 36302 series - Straight Coupler CxMI: 36302-1: 1/2" x BSP 1/2" M, 36302-2: 3/4" x BSP 3/4" M, 36302-3: 1" x BSP 1" M, 36302-4: 1 1/4" x BSP 1 1/4" M, 36302-5: 1 1/2" x BSP 1 1/2" M, 36302-6: 2" x BSP 2" M. 36302F series - Straight Coupler CxMI: 36302F-1: 1/2" x BSP 1/2" M, 36302F-2: 3/4" x BSP 3/4" M, 36302F-3: 1" x BSP 1" M, 36302F-4: 1 1/4" x BSP 1 1/4" M, 36302F-5: 1 1/2" x BSP 1 1/2" M, 36302F-6: 2" x BSP 2" M. 36302LB series - Strt. Coup. Tail and Backnut CxMI: 36302LB-1: 1/2" x BSP 1/2" M, 36302LB-2: 3/4" x BSP 3/4" M, 36302LB-3: 1" x BSP 1" M. 36302T series - Straight Coupling CxMI Threaded to IS07-1: 36302T-1: 1/2" x R 1/2", 36302T-2: 3/4" x R 3/4", 36302T-3: 1" x R 1". 36303 series - Straight Coupling CxFI: 36303-1: 1/2" x BSP 1/2" F, 36303-2: 3/4" x BSP 3/4" F, 36303-3: 1" x BSP 1" F, 36303-4: 1 1/4" x BSP 1 1/4" F, 36303-5: 1 1/2" x BSP 1 1/2" F, 36303-6: 2" x BSP 2" F. 36303SW series - Straight Swivel Coupling CxFI: 36303SW-1: 1/2" x BSP 1/2" F, 36303SW-2: 3/4" x BSP 3/4" F, 36303SW-12: 1/2" x BSP 3/4" F, 36303SW-21: 3/4" x BSP 1/2" F. 36303T series - Straight Coupling CxFI Threaded to IS07-1: 36303T-1: 1/2" x Rc 1/2", 36303T-2: 3/4" x Rc 3/4", 36303T-3: 1" x Rc 1". 36321 series - Tank Connector: 36321-1: 1/2", 36321-2: 3/4", 36321-3: 1", 36321-4: 1 1/4", 36321-5: 1 1/2", 36321-6: 2". 36323 series - Stop End: 36323-1: 1/2", 36323-2: 3/4", 36323-3: 1", 36323-4: 1 1/4", 36323-5: 1 1/2", 36323-6: 2". 36401E series - Elbow CxC: 36401E-1: 1/2"x1/2", 36401E-2: 3/4"x3/4", 36401E-3: 1"x1". 36401 series - 90°Elbows CxC: 36401-1: 1/2"x1/2", 36401-2: 3/4"x3/4", 36401-3: 1"x1", 36401-4: 1 1/4"x1 1/4", 36401-5: 1 1/2"x1 1/2", 36401-6: 2"x2", 36401-10: 1/2"x3/8", 36401-21: 3/4"x1/2", 36401-31: 1"x1/2", 36401-32: 1"x3/4". 36402 series - 90°Elbow CxMI: 36402-1: 1/2" x BSP 1/2" M, 36402-2: 3/4" x BSP 3/4" M, 36402-3: 1" x BSP 1" M, 36402-4: 1 1/4" x BSP 1 1/4" M, 36402-5: 1 1/2" x BSP 1 1/2" M, 36402-6: 2" x BSP 2" M. 36402T series - 90°Elbow CxMI Threaded to ISO7-1: 36402T-1: 1/2" x R 1/2", 36402T-2: 3/4" x R 3/4". 36403 series - 90°Elbow CxFI: 36403-1: 1/2" x BSP 1/2" F, 36403-2: 3/4" x BSP 3/4" F, 36403-3: 1" x BSP 1" F, 36403-4: 1 1/4" x BSP 1 1/4" F, 36403-5: 1 1/2" x BSP 1 1/2" F, 36403-6: 2" x BSP 2" F. 36403SW series - Swivel Elbow CxFI: 36403SW-1: 1/2" x BSP 1/2" F, 36403SW-2: 3/4" x BSP 3/4" F. 36403T series - 90°Elbow CxFI: 36403T-1: 1/2" x BSP 1/2" F, 36403T-2: 3/4" x BSP 3/4" F, 36403T-3: 1" x BSP 1" F. 36403WE series - Wallplate Elbow CxFI: 36403WE-1-3H: 1/2" x BSP 1/2" F, 36403WE-2-3H: 3/4" x BSP 3/4" F. 36601 series - Equal Tee CxCxC: 36601-1: 1/2"x1/2"x1/2", 36601-2: 3/4"x3/4"x3/4", 36601-3: 1"x1"x1", 36601-4: 1 1/4"x1 1/4" x1 1/4", 36601-5: 1 1/2"x1 1/2"x1 1/2", 36601-6: 2"x2"x2". 36601 series - Tee CxCxC: 36601-001: 3/8"x3/8"x1/2", 36601-100: 1/2"x3/8"x3/8", 36601-101: 1/2"x3/8"x1/2", 36601-110: 1/2"x1/2"x3/8", 36601-112: 1/2"x1/2"x3/4", 36601-113: 1/2"x1/2"x1", 36601-211: 3/4"x1/2"x1/2", 36601-212: 3/4"x1/2"x3/4", 36601-221: 3/4"x3/4"x1/2", 36601-223: 3/4"x3/4"x1", 36601-311: 1"x1/2"x1/2", 36601-312: 1"x1/2"x3/4", 36601-313: 1"x1/2"x1", 36601-322: 1"x3/4"x3/4", 36601-323: 1"x3/4"x1", 36601-331: 1"x1"x1/2", 36601-332: 1"x1"x3/4", 36601-441: 1 1/4"x1 1/4"x1/2", 36601-442: 1 1/4"x1 1/4"x3/4", 36601-443: 1 1/4"x1 1/4"x1", 36601-551: 1 1/2"x1 1/2"x1/2", 36601-552: 1 1/2"x1 1/2"x3/4", 36601-553: 1 1/2"x1 1/2"x1", 36601-554: 1 1/2"x1 1/2"x1 1/4", 36601-661: 2"x2"x1/2", 36601-662: 2"x2"x3/4", 36601-663: 2"x2"x1", 36601-664: 2"x2"x1 1/4", 36601-665: 2"x2"x1 1/2". 36615 series - Tee CxCxMI: 36615-1: 1/2"x1/2"x1/2", 36615-2: 3/4"x3/4"x3/4", 36615-3: 1"x1"x1". 36617 series - Tee CxCxFI: 36617-1: 1/2"x1/2"x1/2", 36617-2: 3/4"x3/4"x3/4", 36617-3: 1"x1"x1". 36901 series - Tee CxCxCxC: 36901-1: 1/2"x1/2"x1/2"x1/2", 36901-2: 3/4"x3/4"x3/4"x3/4", 36901-3: 1"x1"x1"x1", 36901-2121: 3/4"x1/2"x3/4"x1/2", 36901-2211: 3/4"x3/4"x1/2"x1/2". 6301SYR series - Straight Coupling C x C: 6301SYR-1: 15mmx15mm, 6301SYR-2: 22mmx22mm, 6301SYR-3: 28mmx28mm, 6302SYR series - Straight Coupling C x MI: 6302SYR-1: 15mm x BSP 1/2" M, 6302SYR-2: 22mm x BSP 3/4" M, 6302SYR-3: 28mm x BSP 1" M. 6303SYR series - Straight Coupling C x FI: 6303SYR-1: 15mm x BSP 1/2" F, 6303SYR-2: 22mm x BSP 3/4" F, 6303SYR-3: 28mm x BSP 1" F. 6401SYR series - 90°Elbow C x C: 6401SYR-1: 15mmx15mm, 6401SYR-2: 22mmx22mm, 6401SYR-3: 28mmx28mm. 6402SYR series - 90°Elbow C x MI: 6402SYR-1: 15mm x BSP 1/2" M, 6402SYR-2: 22mm x BSP 3/4" M, 6402SYR-3: 28mm x BSP 1" M. 6403SYR series - 90°Elbow C x FI: 6403SYR-1: 15mm x BSP 1/2" F, 6403SYR-2: 22mm x BSP 3/4" F, 6403SYR-3: 28mm x BSP 1" F. 6601SYR series - Tee C x C x C: 6601SYR-1: 15mmx15mmx15mm, 6601SYR-2: 22mmx22mmx22mm, 6601SYR-3: 28mmx28mmx28mm. 6601C series - 15mm Corner tee: 6601C-1: 15mmx15mmx15mm, 6601C-2: 22mmx22mmx22mm. 6301CO series - 15mm Cross-Over: 6301CO-1: 15mmx15mm, 6301CO-2: 22mmx22mm, 6301CO-3: 28mmx28mm. 6405 series - 15mm Spigot Elbow: 6405-1: 15mm. 6077 series - Fitting Insert with O-ring: 6077-1: 15mm, 6077-2: 22mm.

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang

Country

China

View All Listings by this Company

Range of ‘M’ profile copper press fittings with EPDM ‘O’-rings for use with copper pipes (manufactured to EN 1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251015011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Linhai Hengye Tubing Equipment Co., Ltd logo (‘IoJ’) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

P5270 series - Coupling: P527012: 12mm, P527015: 15mm, P527018: 18mm, P527022: 22mm, P527028: 28mm, P527035: 35mm, P527042: 42mm, P527054: 54mm. P5270S series - Slip coupling: P5270S12: 12mm, P5270S15: 15mm, P5270S18: 18mm, P5270S22: 22mm, P5270S28: 28mm, P5270S35: 35mm, P5270S42: 42mm, P5270S54: 54mm. P5240 series - Reducing coupling: P52402215: 22x15mm, P52402815: 28x15mm, P52402822: 28x22mm, P52403515: 35x15mm, P52403522: 35x22mm, P52403528: 35x28mm, P52404222: 42x22mm, P52404228: 42x28mm, P52404235: 42x35mm, P52405428: 54x28mm, P52405435: 54x35mm, P52405442: 54x42mm. P5243 series - Fitting Reducer: P52431512: 15x12mm, P52431812: 18x12mm, P52431815: 18x15mm, P52432215: 22x15mm, P52432218: 22x18mm, P52432815: 28x15mm, P52432818: 28x18mm, P52432822: 28x22mm, P52433515: 35x15mm, P52433518: 35x18mm, P52433522: 35x22mm, P52433528: 35x28mm, P52434215: 42x15mm, P52434218: 42x18mm, P52434222: 42x22mm, P52434228: 42x28mm, P52434235: 42x35mm, P52435415: 54x15mm, P52435418: 54x18mm, P52435422: 54x22mm, P52435428: 54x28mm, P52435435: 54x35mm, P52435442: 54x42mm. P5090 series - Reducing elbow 90°: P50902215: 22x15mm, P50902815: 28x15mm, P50902822: 28x22mm. P5085 series - Full Crossover: P508515: 15mm, P508522: 22mm. P5086 series - Part Crossover: P508615: 15mm, P508622: 22mm. P5090 series - Elbow 90°: P509012: 12mm, P509015: 15mm, P509018: 18mm, P509022: 22mm, P509028: 28mm, P509035: 35mm, P509042: 42mm, P509054: 54mm. P5092 series - Street elbow 90°: P509212: 12mm, P509215: 15mm, P509218: 18mm, P509222: 22mm, P509228: 28mm, P509235: 35mm, P509242: 42mm, P509254: 54mm. P5041 series - Elbow 45°: P504112: 12mm, P504115: 15mm, P504118: 18mm, P504122: 22mm, P504128: 28mm, P504135: 35mm, P504142: 42mm, P504154: 54mm. P5040 series - Street elbow 45°: P504012: 12mm, P504015: 15mm, P504018: 18mm, P504022: 22mm, P504028: 28mm, P504035: 35mm, P504042: 42mm, P504054: 54mm. P5130 series - Equal tee: P513012: 12mm, P513015: 15mm, P513018: 18mm, P513022: 22mm, P513028: 28mm, P513035: 35mm, P513042: 42mm, P513054: 54mm. P5130 series - Reducing tee: P5130151212: 15x12x12mm, P5130151215: 15x12x15mm, P5130151815: 15x18x15mm, P5130152215: 15x22x15mm, P5130181218: 18x12x18mm, P5130181515: 18x15x15mm, P5130181518: 18x15x18mm, P5130181815: 18x18x15mm, P5130221222: 22x12x22mm, P5130221522: 22x15x22mm, P5130221822: 22x18x22mm, P5130221515: 22x15x15mm, P5130222215: 22x22x15mm, P5130281528: 28x15x28mm, P5130281828: 28x18x28mm, P5130282228: 28x22x28mm, P5130351535: 35x15x35mm, P5130351835: 35x18x35mm, P5130352235: 35x22x35mm, P5130352835: 35x28x35mm, P5130351515: 35x15x15mm, P5130351518: 35x15x18mm, P5130351522: 35x15x22mm, P5130351528: 35x15x28mm, P5130351815: 35x18x15mm, P5130351818: 35x18x18mm, P5130351822: 35x18x22mm, P5130351828: 35x18x28mm, P5130352215: 35x22x15mm, P5130352218: 35x22x18mm, P5130352222: 35x22x22mm, P5130352228: 35x22x28mm, P5130352815: 35x28x15mm, P5130352818: 35x28x18mm, P5130352822: 35x28x22mm, P5130352828: 35x28x28mm, P5130353515: 35x35x15mm, P5130353518: 35x35x18mm, P5130353522: 35x35x22mm, P5130353528: 35x35x28mm, P5130421542: 42x15x42mm, P5130421842: 42x18x42mm, P5130422242: 42x22x42mm, P5130422842: 42x28x42mm, P5130423542: 42x35x42mm, P5130421515: 42x15x15mm, P5130421518: 42x15x18mm, P5130421522: 42x15x22mm, P5130421528: 42x15x28mm, P5130421535: 42x15x35mm, P5130421815: 42x18x15mm, P5130421818: 42x18x18mm, P5130421822: 42x18x22mm, P5130421828: 42x18x28mm, P5130421835: 42x18x35mm, P5130422215: 42x22x15mm, P5130422218: 42x22x18mm, P5130422222: 42x22x22mm, P5130422228: 42x22x28mm, P5130422235: 42x22x35mm, P5130422815: 42x28x15mm, P5130422818: 42x28x18mm, P5130422822: 42x28x22mm, P5130422828: 42x28x28mm, P5130422835: 42x28x35mm, P5130423515: 42x35x15mm, P5130423518: 42x35x18mm, P5130423522: 42x35x22mm, P5130423528: 42x35x28mm, P5130423535: 42x35x35mm, P5130424215: 42x42x15mm, P5130424218: 42x42x18mm, P5130424222: 42x42x22mm, P5130424228: 42x42x28mm, P5130424235: 42x42x35mm, P5130541554: 54x15x54mm, P5130541854: 54x18x54mm, P5130542254: 54x22x54mm, P5130542854: 54x28x54mm, P5130543554: 54x35x54mm, P5130544254: 54x42x54mm, P5130541515: 54x15x15mm, P5130541518: 54x15x18mm, P5130541522: 54x15x22mm, P5130541528: 54x15x28mm, P5130541535: 54x15x35mm, P5130541542: 54x15x42mm, P5130541815: 54x18x15mm, P5130541818: 54x18x18mm, P5130541822: 54x18x22mm, P5130541828: 54x18x28mm, P5130541835: 54x18x35mm, P5130541842: 54x18x42mm, P5130542215: 54x22x15mm, P5130542218: 54x22x18mm, P5130542222: 54x22x22mm, P5130542228: 54x22x28mm, P5130542235: 54x22x35mm, P5130542242: 54x22x42mm, P5130542815: 54x28x15mm, P5130542818: 54x28x18mm, P5130542822: 54x28x22mm, P5130542828: 54x28x28mm, P5130542835: 54x28x35mm, P5130542842: 54x28x42mm, P5130543515: 54x35x15mm, P5130543518: 54x35x18mm, P5130543522: 54x35x22mm, P5130543528: 54x35x28mm, P5130543535: 54x35x35mm, P5130543542: 54x35x42mm, P5130544215: 54x42x15mm, P5130544218: 54x42x18mm, P5130544222: 54x42x22mm, P5130544228: 54x42x28mm, P5130544235: 54x42x35mm, P5130544242: 54x42x42mm, P5130545415: 54x54x15mm, P5130545418: 54x54x18mm, P5130545422: 54x54x22mm, P5130545428: 54x54x28mm, P5130545435: 54x54x35mm, P5130545442: 54x54x42mm. P5301 series - End cap: P530112: 12mm, P530115: 15mm, P530118: 18mm, P530122: 22mm, P530128: 28mm, P530135: 35mm, P530142: 42mm, P530154: 54mm.

Approval Holder:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

'Flomasta’ range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602053

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

‘Flomasta’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

RWC range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207410

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

JG logo, John Guest, size & PN on compression nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Reducing Tee (Branch Reduced) RWC UGCF30A252520: JG MDPE Compression Red Tee - 25 x 25 x 20mm UGCF30A323225: JG MDPE Compression Red Tee - 32 x 32 x 25mm UGCF30A404032: JG MDPE Compression Red Tee - 40 x 40 x 32mm UGCF30A505025: JG MDPE Compression Red Tee - 50 x 50 x 25mm UGCF30A505032: JG MDPE Compression Red Tee - 50 x 50 x 32mm UGCF30A505040: JG MDPE Compression Red Tee - 50 x 50 x 40mm UGCF30A636332: JG MDPE Compression Red Tee - 63 x 63 x 32mm UGCF30A636340: JG MDPE Compression Red Tee - 63 x 63 x 40mm UGCF30A636350: JG MDPE Compression Red Tee - 63 x 63 x 50mm Male Thread Adaptor RWC UGCF45M2012BSP: JG MDPE Compression Male Adpt - 20mm x 1/2" UGCF45M2034BSP: JG MDPE Compression Male Adpt - 20mm x 3/4" UGCF45M2512BSP: JG MDPE Compression Male Adpt - 25mm x 1/2" UGCF45M2534BSP: JG MDPE Compression Male Adpt - 25mm x 3/4" UGCF45M251BSP: JG MDPE Compression Male Adpt - 25mm x 1" UGCF45M3234BSP: JG MDPE Compression Male Adpt - 32mm x 3/4" UGCF45M321BSP: JG MDPE Compression Male Adpt - 32mm x 1" UGCF45M32114BSP: JG MDPE Compression Male Adpt - 32mm x 1-1/4" UGCF45M32112BSP: JG MDPE Compression Male Adpt - 32mm x 1-1/2" UGCF45M401BSP: JG MDPE Compression Male Adpt - 40mm x 1" UGCF45M40114BSP: JG MDPE Compression Male Adpt - 40mm x 1-1/4" UGCF45M40112BSP: JG MDPE Compression Male Adpt - 40mm x 1-1/2" UGCF45M50112BSP: JG MDPE Compression Male Adpt - 50mm x 1-1/2" UGCF45M502BSP: JG MDPE Compression Male Adpt - 50mm x 2" UGCF45M63112BSP: JG MDPE Compression Male Adpt - 63mm x 1-1/2" UGCF45M632BSP: JG MDPE Compression Male Adpt - 63mm x 2" Female Threaded Branch Tee RWC UGCF58F202012BSP: JG MDPE Compression Fem Tee - 20 x 20 x 1/2" UGCF58F202034BSP: JG MDPE Compression Fem Tee - 20 x 20 x 3/4" UGCF58F252512BSP: JG MDPE Compression Fem Tee - 25 x 25 x 1/2" UGCF58F252534BSP: JG MDPE Compression Fem Tee - 25 x 25 x 3/4" UGCF58F323234BSP: JG MDPE Compression Fem Tee - 32 x 32 x 3/4" UGCF58F32321BSP: JG MDPE Compression Fem Tee - 32 x 32 x 1" UGCF58F4040114BSP: JG MDPE Compression Fem Tee - 40 x 40 x 1-1/4" UGCF58F4040112BSP: JG MDPE Compression Fem Tee - 40 x 40 x 1-1/2" UGCF58F5050112BSP: JG MDPE Compression Fem Tee - 50 x 50 x 1-1/2" UGCF58F50502BSP: JG MDPE Compression Fem Tee - 50 x 50 x 2" UGCF58F63632BSP: JG MDPE Compression Fem Tee - 63 x 63 x 2" Female Thread Adaptor RWC UGCF45F2012BSP: JG MDPE Compression Female Adpt - 20mm x 1/2" UGCF45F2034BSP: JG MDPE Compression Female Adpt - 20mm x 3/4" UGCF45F2512BSP: JG MDPE Compression Female Adpt - 25mm x 1/2" UGCF45F2534BSP: JG MDPE Compression Female Adpt - 25mm x 3/4" UGCF45F251BSP: JG MDPE Compression Female Adpt - 25mm x 1" UGCF45F3234BSP: JG MDPE Compression Female Adpt - 32mm x 3/4" UGCF45F321BSP: JG MDPE Compression Female Adpt - 32mm x 1" UGCF45F32114BSP: JG MDPE Compression Female Adpt - 32mm x 1-1/4" UGCF45F32112BSP: JG MDPE Compression Female Adpt - 32mm x 1-1/2" UGCF45F401BSP: JG MDPE Compression Female Adpt - 40mm x 1" UGCF45F40114BSP: JG MDPE Compression Female Adpt - 40mm x 1-1/4" UGCF45F40112BSP: JG MDPE Compression Female Adpt - 40mm x 1-1/2" UGCF45F50112BSP: JG MDPE Compression Female Adpt - 50mm x 1-1/2" UGCF45F502BSP: JG MDPE Compression Female Adpt - 50mm x 2" UGCF45F63112BSP: JG MDPE Compression Female Adpt - 63mm x 1-1/2" UGCF45F632BSP: JG MDPE Compression Female Adpt - 63mm x 2" Stop End RWC UGCF4620: JG MDPE Compression Stop End - 20mm UGCF4625: JG MDPE Compression Stop End - 25mm UGCF4632: JG MDPE Compression Stop End - 32mm UGCF4640: JG MDPE Compression Stop End - 40mm UGCF4650: JG MDPE Compression Stop End - 50mm UGCF4663: JG MDPE Compression Stop End - 63mm Straight Coupling RWC UGCF0420: JG MDPE Compression Straight Coupling - 20mm UGCF0425: JG MDPE Compression Straight Coupling - 25mm UGCF0432: JG MDPE Compression Straight Coupling - 32mm UGCF0440: JG MDPE Compression Straight Coupling - 40mm UGCF0450: JG MDPE Compression Straight Coupling - 50mm UGCF0463: JG MDPE Compression Straight Coupling - 63mm Reducing Coupling RWC UGCF202520: JG MDPE Compression Red Coupling - 25 x 20mm UGCF203220: JG MDPE Compression Red Coupling - 32 x 20mm UGCF203225: JG MDPE Compression Red Coupling - 32 x 25mm UGCF204025: JG MDPE Compression Red Coupling - 40 x 25mm UGCF204032: JG MDPE Compression Red Coupling - 40 x 32mm UGCF205025: JG MDPE Compression Red Coupling - 50 x 25mm UGCF205032: JG MDPE Compression Red Coupling - 50 x 32mm UGCF205040: JG MDPE Compression Red Coupling - 50 x 40mm UGCF206332: JG MDPE Compression Red Coupling - 63 x 32mm UGCF206340: JG MDPE Compression Red Coupling - 63 x 40mm UGCF206350: JG MDPE Compression Red Coupling - 63 x 50mm Elbow - 90 Degree RWC UGCF0320: JG MDPE Compression Elbow - 90D - 20mm UGCF0325: JG MDPE Compression Elbow - 90D - 25mm UGCF0332: JG MDPE Compression Elbow - 90D - 32mm UGCF0340: JG MDPE Compression Elbow - 90D - 40mm UGCF0350: JG MDPE Compression Elbow - 90D - 50mm UGCF0363: JG MDPE Compression Elbow - 90D - 63mm Male Threaded Elbow RWC UGCF75M2534BSP: JG MDPE Compression Male Elbow - 25mm x 3/4" UGCF75M321BSP: JG MDPE Compression Male Elbow - 32mm x 1" Female Threaded Elbow RWC UGCF75F2012BSP: JG MDPE Compression Fem Elbow - 20mm x 1/2" UGCF75F2034BSP: JG MDPE Compression Fem Elbow - 20mm x 3/4" UGCF75F2512BSP: JG MDPE Compression Fem Elbow - 25mm x 1/2" UGCF75F2534BSP: JG MDPE Compression Fem Elbow - 25mm x 3/4" UGCF75F251BSP: JG MDPE Compression Fem Elbow - 25mm x 1" UGCF75F321BSP: JG MDPE Compression Fem Elbow - 32mm x 1" UGCF75F40114BSP: JG MDPE Compression Fem Elbow - 40mm x 1-1/4" UGCF75F40112BSP: JG MDPE Compression Fem Elbow - 40mm x 1-1/2" UGCF75F50112BSP: JG MDPE Compression Fem Elbow - 50mm x 1-1/2" UGCF75F632BSP: JG MDPE Compression Fem Elbow - 63mm x 2" Wall Plate Elbow (PP) RWC UGCF88WB2012BSP: JG MDPE Compression Wall Elbow - 20mm x 1/2" UGCF88WB2534BSP: JG MDPE Compression Wall Elbow - 25mm x 3/4" Equal Tee RWC UGCF0220: JG MDPE Compression Equal Tee - 20mm UGCF0225: JG MDPE Compression Equal Tee - 25mm UGCF0232: JG MDPE Compression Equal Tee - 32mm UGCF0240: JG MDPE Compression Equal Tee - 40mm UGCF0250: JG MDPE Compression Equal Tee - 50mm UGCF0263: JG MDPE Compression Equal Tee - 63mm Repair Coupling RWC UGCF04R25: JG MDPE Compression Repair Coupling - 25mm UGCF04R32: JG MDPE Compression Repair Coupling - 32mm UGCF04R40: JG MDPE Compression Repair Coupling - 40mm UGCF04R50: JG MDPE Compression Repair Coupling - 50mm UGCF04R63: JG MDPE Compression Repair Coupling - 63mm Conversion Adaptor - MPDE to Copper (Pushfit) RWC UGCF01PF2522: JG MDPE Compression Conversion Adpt - 25 x 22mm UGCF01PF3222: JG MDPE Compression Conversion Adpt - 32 x 22mm UGCF01PF3228: JG MDPE Compression Conversion Adpt - 32 x 28mm Models added September 2025 UGCF75F321BSP ELBOW THREADED FEMALE 32 X 1" UGCF30A505032 TEE REDUCING 50X32X50 Models added January 2026 UGCF01IMP2012BSP - Coupling 1/2"x20 UGCF01IMP2512BSP - Coupling 1/2"x25 UGCF01IMP2534BSP - Coupling 3/4"x25 UGCF0316: ELBOW - 90 DEGREE 16X16 UGCF0216: EQUAL TEE 16X16X16 UGCF30A202016: TEE REDUCING 20X16X20 UGCF4616: END PLUG 16MM UGCF0416: COUPLING 16X16 UGCF202016: REDUCING COUPLING 20X16 UGCF202516: REDUCING COUPLING 25X16 UGCF01PF2015: UNIVERSAL FITTING - CONVERSION REDUCER 20X15 UGCF01PF2515: UNIVERSAL FITTING - CONVERSION REDUCER 25X15 UGCF45M1612BSP: ADAPTOR MALE 16X UGCF45M1634BSP: ADAPTOR MALE 16X UGCF45F1612BSP: ADAPTOR FEMALE 16X 1/2’’ UGCF45F1634BSP: ADAPTOR FEMALE 16X 3/4’’

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F),

Marking:

Brymec & arrow logo, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Equal Straight Union (16mm - 32mm): 51019 ∙ 16mm Brass Coupler Multilayer Crimp Fitting 51020 ∙ 20mm Brass Coupler Multilayer Crimp Fitting 51018 ∙ 25mm Brass Coupler Multilayer Crimp Fitting 51022 ∙ 32mm Brass Coupler Multilayer Crimp Fitting Unequal Straight Union (20mmx16mm - 32mmx26mm): 51028 ∙ 20x16mm Reducing Coupler Multilayer Crimp Fitting 51040 ∙ 25x16mm Reducing Coupler Multilayer Crimp Fitting 51038 ∙ 25x20mm Reducing Coupler Multilayer Crimp Fitting 51031 ∙ 32x16mm Reducing Coupler Multilayer Crimp Fitting 51032 ∙ 32x20mm Reducing Coupler Multilayer Crimp Fitting 51039 ∙ 32x25mm Reducing Coupler Multilayer Crimp Fitting Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51081 ∙ 16mm x 1/2" Male Iron Multilayer Crimp Coupler 51083 ∙ 20mm x 1/2" Male Iron Multilayer Crimp Coupler 51084 ∙ 20mm x 3/4" Male Iron Multilayer Crimp Coupler 51082 ∙ 25mm x 3/4" Male Iron Multilayer Crimp Fitting 51085 ∙ 25mm x 1" Male Iron Multilayer Crimp Fitting 51088 ∙ 32mm x 1" Male Iron Multilayer Crimp Coupler Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): 51067 ∙ 16mm x 1/2" Female Iron Multilayer Crimp Coupler 51069 ∙ 20mm x 1/2" Female Iron Multilayer Crimp Coupler 51070 ∙ 20mm x 3/4" Female Iron Multilayer Crimp Coupler 51095 ∙ 25mm x 3/4" Female Iron Multilayer Crimp Fitting 51068 ∙ 25mm x 1" Female Iron Multilayer Crimp Fitting 51073 ∙ 32mm x 1" Female Iron Multilayer Crimp Coupler Equal Elbows (16mm - 32mm): 51044 ∙ 16mm Brass 90 Elbow Multilayer Crimp Fitting 51045 ∙ 20mm Brass 90 Elbow Multilayer Crimp Fitting 51043 ∙ 25mm Brass 90 Elbow Multilayer Crimp Fitting 51047 ∙ 32mm Brass 90 Elbow Multilayer Crimp Fitting Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51096 ∙ 16mm x 1/2" Male Iron Elbow Multilayer Crimp Fitting 51098 ∙ 20mm x 3/4" Male Iron Elbow Multilayer Crimp Fitting 51099 ∙ 25mm x 1" Male Iron Elbow Multilayer Crimp Fitting Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): 51096 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51108 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51109 ∙ 20mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51105 ∙ 25mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51106 ∙ 25mm x 1" Female Iron Elbow Multilayer Crimp Fitting Equal Tees (16mm - 32mm): 51058 ∙ 16mm Brass Equal Tee Multilayer Crimp Fitting 51059 ∙ 20mm Brass Equal Tee Multilayer Crimp Fitting 51042 ∙ 25mm Brass Equal Tee Multilayer Crimp Fitting 51061 ∙ 32mm Brass Equal Tee Multilayer Crimp Fitting Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): 51140 ∙ 16x16x20mm Reducing Ends Tee Multilayer Crimp 51142 ∙ 20x16x16mm Reducing End & Branch Tee Multilayer Crimp 51121 ∙ 20x20x16mm Reducing Branch Tee Multilayer Crimp 51137 ∙ 20x20x25mm Reducing Ends Tee Multilayer Crimp 51124 ∙ 25x25x16mm Reducing Branch Tee Multilayer Crimp 51147 ∙ 25x20x20mm Reducing End & Branch Tee Multilayer Crimp 51125 ∙ 25x25x20mm Reducing Branch TEE Multilayer Crimp 51129 ∙ 32x32x20mm Reducing Branch Tee Multilayer Crimp 51130 ∙ 32x32x25mm Reducing Branch Tee Multilayer Crimp Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): 51155 ∙ 16mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51156 ∙ 20mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51157 ∙ 25mm x 3/4" Female Iron Branch Tee Multilayer Crimp Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): 51171 ∙ 16mm x 1/2" Backplate Elbow Multilayer Crimp 51173 ∙ 20mm x 3/4" Backplate Elbow Multilayer Crimp. _________

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of plastic and DZR brass pushfit fittings for use with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipes (manufactured to EN 1057). Maximum working pressure 10.0 bar, except tank connectors which are open outlet use only. Cold water use only. From March 2026: Maximum operating temperature 65°C for all models except tank connectors.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251015003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 applies to the ATC tank connectors.

Size:

See model.

Marking:

Twistloc company logo (‘TLC’) and size either on body and/or collet.

Installation Requirements:

R001 R008

Expiry date:

31/10/2030

Model:

Plastic Fittings: SMF6741M-2P - 2 Ports Manifold 22mm pushfit x 10mm pushfit x 10mm pushfit. SMF6746M-2P - 2 Ports Manifold 22mm pushfit x 15mm pushfit x 15mm pushfit. SMF6741M-4P - 4 Ports Manifold 22mm pushfit x 10mm pushfit x 10mm pushfit x 10mm pushfit. ATC44M - Tank connector 22mm pushfit x ¾" BSP (M). ATC66M - Tank connector 15mm pushfit x ½” BSP (M). ATC00M - Tank connector 28mm pushfit x 1” BSP (M). ATC44MBK - Tank connector 22mm pushfit x ¾" BSP (M). ATC66MBK - Tank connector 15mm pushfit x ½” BSP (M). ATC00MBK - Tank connector 28mm pushfit x 1” BSP (M). DZR Brass Fittings: SBFCA6741M - Cylinder Adaptor 22mm pushfit x 1" BSP (F). SBFA6764M - Female Coupler 15mm pushfit x ½" BSP (F). SBFA6765M - Female Coupler 15mm pushfit x ¾" BSP (F). SBFA6745M - Female Coupler 22mm pushfit x ¾" BSP (F). SBMCC6741M - Cylinder Adaptor 22mm pushfit x 1" BSP (M). SBMC6714M - Male Coupler 10mm pushfit x ½" BSP (M). SBMC6764M - Male Coupler 15mm pushfit x ½" BSP (M). SBMC6745M - Male Coupler 22mm pushfit x ¾" BSP (M). SBBPE6764M - Back Plate Elbow 15mm pushfit x ½" BSP (F). SBMSA6764M - Male Stem Adaptor 15mm x ½" BSP (M). SBMSA6745M - Male Stem Adaptor 22mm x ¾" BSP (M). SBMSA6701M - Male Stem Adaptor 28mm x 1" BSP (M). SBFSA6764M - Female Stem Adaptor 15mm x ½" BSP (F). SBFSA6745M - Female Stem Adaptor 22mm x ¾” BSP (F).

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

'Flomasta' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

‘Flomasta’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

Kingfisher International Products B.V

Company Name

Kingfisher International Products B.V

Address

Rapenburgerstraat 175E, 1011 VM Amsterdam

Country

Netherlands

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Range of end feed copper fittings for use with copper pipes (manufactured to EN 1057). The 5043G series and 5002G series models incorporate an EPDM ‘O’-ring on the captive nut connection. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251015004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Linhai Hengye Tubing Equipment Co., Ltd logo (‘IoJ’) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

5270 series - Coupling: 52706: 6mm, 52708: 8mm, 527010: 10mm, 527012: 12mm, 527014: 14mm, 527015: 15mm, 527016: 16mm, 527018: 18mm, 527022: 22mm, 527028: 28mm, 527035: 35mm, 527040: 40mm, 527042: 42mm, 527054: 54mm, 527064: 64mm, 527067: 67mm, 527070: 70mm, 527076: 76mm, 527089: 89mm, 5270108: 108mm. 5270S series - Slip coupling: 5270S12: 12mm, 5270S15: 15mm, 5270S18: 18mm, 5270S22: 22mm, 5270S28: 28mm, 5270S35: 35mm, 5270S42: 42mm, 5270S54: 54mm, 5270S67: 67mm, 5270S76: 76mm, 5270S108: 108mm. 5240MI series - Coupling for BS and Irish: 5240MI1512: 15mmx1/2", 5240MI2234: 22mmx3/4", 5240MI281: 28mmx1", 5240MI35114: 35mmx1-1/4". 5240 series - Reducing coupling: 524086: 8x6mm, 5240106: 10x6mm, 5240108: 10x8mm, 5240126: 12x6mm, 5240128: 12x8mm, 52401210: 12x10mm, 52401410: 14x10mm, 52401412: 14x12mm, 5240158: 15x8mm, 52401510: 15x10mm, 52401512: 15x12mm, 52401514: 15x14mm, 52401610: 16x10mm, 52401612: 16x12mm, 52401614: 16x14mm, 52401615: 16x15mm, 52401810: 18x10mm, 52401812: 18x12mm, 52401814: 18x14mm, 52401815: 18x15mm, 52401816: 18x16mm, 52402210: 22x10mm, 52402212: 22x12mm, 52402214: 22x14mm, 52402215: 22x15mm, 52402216: 22x16mm, 52402218: 22x18mm, 52402812: 28x12mm, 52402814: 28x14mm, 52402815: 28x15mm, 52402816: 28x16mm, 52402818: 28x18mm, 52402822: 28x22mm, 52403515: 35x15mm, 52403518: 35x18mm, 52403522: 35x22mm, 52403528: 35x28mm, 52404028: 40x28mm, 52404215: 42x15mm, 52404222: 42x22mm, 52404228: 42x28mm, 52404235: 42x35mm, 52405415: 54x15mm, 52405422: 54x22mm, 52405428: 54x28mm, 52405435: 54x35mm, 52405442: 54x42mm, 52406435: 64x35mm, 52406442: 64x42mm, 52406454: 64x54mm, 52406735: 67x35mm, 52406742: 67x42mm, 52406754: 67x54mm, 52407054: 70x54mm, 52407635: 76x35mm, 52407642: 76x42mm, 52407654: 76x54mm, 52407664: 76x64mm, 52407667: 76x67mm, 52408054: 80x54mm, 52408976: 89x76mm, 524010842: 108x42mm, 524010854: 108x54mm, 524010867: 108x67mm, 524010876: 108x76mm, 524010889: 108x89mm. 5243 series - Fitting reducer: 524386: 8x6mm, 5243106: 10x6mm, 5243108: 10x8mm, 5243126: 12x6mm, 5243128: 12x8mm, 52431210: 12x10mm, 52431410: 14x10mm, 52431412: 14x12mm, 5243158: 15x8mm, 52431510: 15x10mm, 52431512: 15x12mm, 52431514: 15x14mm, 52431610: 16x10mm, 52431612: 16x12mm, 52431614: 16x14mm, 52431615: 16x15mm, 52431810: 18x10mm, 52431812: 18x12mm, 52431814: 18x14mm, 52431815: 18x15mm, 52431816: 18x16mm, 52432210: 22x10mm, 52432212: 22x12mm, 52432214: 22x14mm, 52432215: 22x15mm, 52432216: 22x16mm, 52432218: 22x18mm, 52432810: 28x10mm, 52432812: 28x12mm, 52432814: 28x14mm, 52432815: 28x15mm, 52432816: 28x16mm, 52432818: 28x18mm, 52432822: 28x22mm, 52433515: 35x15mm, 52433518: 35x18mm, 52433522: 35x22mm, 52433528: 35x28mm, 52434028: 40x28mm, 52434215: 42x15mm, 52434218: 42x18mm, 52434222: 42x22mm, 52434228: 42x28mm, 52434235: 42x35mm, 52435415: 54x15mm, 52435422: 54x22mm, 52435428: 54x28mm, 52435435: 54x35mm, 52435442: 54x42mm, 52436435: 64x35mm, 52436442: 64x42mm, 52436454: 64x54mm, 52436722: 67x22mm, 52436728: 67x28mm, 52436735: 67x35mm, 52436742: 67x42mm, 52436754: 67x54mm, 52437042: 70x42mm, 52437635: 76x35mm, 52437642: 76x42mm, 52437654: 76x54mm, 52437664: 76x64mm, 52437667: 76x67mm, 52438054: 80x54mm, 52438064: 80x64mm, 52438954: 89x54mm, 52438964: 89x64mm, 52438976: 89x76mm, 524310835: 108x35mm, 524310842: 108x42mm, 524310854: 108x54mm, 524310867: 108x67mm, 524310876: 108x76mm, 524310889: 108x89mm. 5090 series - Elbow: 50906: 6mm, 50908: 8mm, 509010: 10mm, 509012: 12mm, 509014: 14mm, 509015: 15mm, 509016: 16mm, 509018: 18mm, 509022: 22mm, 509025: 25mm, 509028: 28mm, 509035: 35mm, 509040: 40mm, 509042: 42mm, 509054: 54mm, 509064: 64mm, 509067: 67mm, 509076: 76mm, 509089: 89mm, 5090108: 108mm. 5092 series - Street elbow 90°: 50926: 6mm, 50928: 8mm, 509210: 10mm, 509212: 12mm, 509214: 14mm, 509215: 15mm, 509216: 16mm, 509218: 18mm, 509222: 22mm, 509228: 28mm, 509235: 35mm, 509240: 40mm, 509242: 42mm, 509254: 54mm, 509264: 64mm, 509267: 67mm. 5090 series - Reducing elbow 90°: 50901512: 15x12mm, 50902215: 22x15mm, 50902822: 28x22mm, 50903528: 35x28mm. 5041 series - Elbow 45°: 50416: 6mm, 50418: 8mm, 504110: 10mm, 504112: 12mm, 504114: 14mm, 504115: 15mm, 504116: 16mm, 504118: 18mm, 504122: 22mm, 504128: 28mm, 504135: 35mm, 504140: 40mm, 504142: 42mm, 504154: 54mm, 504164: 64mm, 504167: 67mm, 504170: 70mm, 504176: 76mm, 504180: 80mm, 504189: 89mm, 5041108: 108mm. 5040 series - Street elbow 45°: 50406: 6mm, 50408: 8mm, 504010: 10mm, 504012: 12mm, 504014: 14mm, 504015: 15mm, 504016: 16mm, 504018: 18mm, 504022: 22mm, 504028: 28mm, 504035: 35mm, 504040: 40mm, 504042: 42mm, 504054: 54mm, 504064: 64mm, 504067: 67mm, 504076: 76mm, 504089: 89mm, 5040108: 108mm. 5002A series - Bend 90°: 5002A6: 6mm, 5002A8: 8mm, 5002A10: 10mm, 5002A12: 12mm, 5002A14: 14mm, 5002A15: 15mm, 5002A16: 16mm, 5002A18: 18mm, 5002A22: 22mm, 5002A28: 28mm, 5002A35: 35mm, 5002A40: 40mm, 5002A42: 42mm, 5002A54: 54mm, 5002A64: 64mm, 5002A67: 67mm, 5002A70: 70mm, 5002A76: 76mm, 5002A80: 80mm, 5002A89: 89mm, 5002A108: 108mm. 5001A series - Street bend 90°: 5001A6: 6mm, 5001A8: 8mm, 5001A10: 10mm, 5001A12: 12mm, 5001A14: 14mm, 5001A15: 15mm, 5001A16: 16mm, 5001A18: 18mm, 5001A22: 22mm, 5001A28: 28mm, 5001A35: 35mm, 5001A40: 40mm, 5001A42: 42mm, 5001A54: 54mm, 5001A64: 64mm, 5001A67: 67mm, 5001A76: 76mm, 5001A80: 80mm, 5001A89: 89mm, 5001A108: 108mm, 5085 series - Full crossover: 508512: 12mm, 508514: 14mm, 508515: 15mm, 508516: 16mm, 508518: 18mm, 508522: 22mm, 508528: 28mm. 5086 series - Part crossover: 508612: 12mm, 508614: 14mm, 508615: 15mm, 508616: 16mm, 508618: 18mm, 508622: 22mm, 508628: 28mm. 5130 series - Equal tee: 51306: 6mm, 51308: 8mm, 513010: 10mm, 513012: 12mm, 513014: 14mm, 513015: 15mm, 513016: 16mm, 513018: 18mm, 513022: 22mm, 513028: 28mm, 513035: 35mm, 513040: 40mm, 513042: 42mm, 513054: 54mm, 513064: 64mm, 513067: 67mm, 513070: 70mm, 513076: 76mm, 513080: 80mm, 513089: 89mm, 5130108: 108mm. 5130 series - Reducing tee: 5130686: 6x8x6mm, 51306106: 6x10x6mm, 5130866: 8x6x6mm, 5130868: 8x6x8mm, 51308108: 8x10x8mm, 51301088: 10x8x8mm, 513010610: 10x6x10mm, 513010810: 10x8x10mm, 5130101210: 10x12x10mm, 5130101510: 10x15x10mm, 513010108: 10x10x8mm, 513012612: 12x6x12mm, 513012812: 12x8x12mm, 513012810: 12x8x10mm, 5130121010: 12x10x10mm, 5130121210: 12x12x10mm, 5130121012: 12x10x12mm, 5130121412: 12x14x12mm, 5130121512: 12x15x12mm, 5130121612: 12x16x12mm, 5130121812: 12x18x12mm, 5130141212: 14x12x12mm, 5130141412: 14x14x12mm, 5130141812: 14x18x12mm, 5130141014: 14x10x14mm, 5130141214: 14x12x14mm, 5130141614: 14x16x14mm, 5130141814: 14x18x14mm, 5130142214: 14x22x14mm, 5130151010: 15x10x10mm, 5130151012: 15x10x12mm, 5130151510: 15x15x10mm, 5130151212: 15x12x12mm, 5130151512: 15x15x12mm, 5130151812: 15x18x12mm, 513015615: 15x6x15mm, 513015815: 15x8x15mm, 5130151015: 15x10x15mm, 5130151215: 15x12x15mm, 5130151815: 15x18x15mm, 5130152215: 15x22x15mm, 5130161610: 16x16x10mm, 5130161212: 16x12x12mm, 5130161412: 16x14x12mm, 5130161612: 16x16x12mm, 5130161214: 16x12x14mm, 5130161414: 16x14x14mm, 5130161614: 16x16x14mm, 5130161814: 16x18x14mm, 513016616: 16x6x16mm, 513016816: 16x8x16mm, 5130161016: 16x10x16mm, 5130161216: 16x12x16mm, 5130161416: 16x14x16mm, 5130161816: 16x18x16mm, 5130162216: 16x22x16mm, 5130181212: 18x12x12mm, 5130181512: 18x15x12mm, 5130181812: 18x18x12mm, 5130181414: 18x14x14mm, 5130181614: 18x16x14mm, 5130181814: 18x18x14mm, 5130181215: 18x12x15mm, 5130181515: 18x15x15mm, 5130181815: 18x18x15mm, 5130182215: 18x22x15mm, 5130181416: 18x14x16mm, 5130181616: 18x16x16mm, 5130181816: 18x18x16mm, 513018618: 18x6x18mm, 5130181018: 18x10x18mm, 5130181218: 18x12x18mm, 5130181418: 18x14x18mm, 5130181518: 18x15x18mm, 5130181618: 18x16x18mm, 5130182218: 18x22x18mm, 5130182818: 18x28x18mm, 5130221212: 22x12x12mm, 5130221414: 22x14x14mm, 5130221614: 22x16x14mm, 5130221814: 22x18x14mm, 5130222214: 22x22x14mm, 5130221215: 22x12x15mm, 5130221515: 22x15x15mm, 5130221815: 22x18x15mm, 5130222212: 22x22x12mm, 5130222215: 22x22x15mm, 5130221616: 22x16x16mm, 5130221816: 22x18x16mm, 5130222216: 22x22x16mm, 5130221218: 22x12x18mm, 5130221418: 22x14x18mm, 5130221518: 22x15x18mm, 5130221618: 22x16x18mm, 5130221818: 22x18x18mm, 5130222218: 22x22x18mm, 513022622: 22x6x22mm, 5130221022: 22x10x22mm, 5130221222: 22x12x22mm, 5130221422: 22x14x22mm, 5130221522: 22x15x22mm, 5130221622: 22x16x22mm, 5130221822: 22x18x22mm, 5130222822: 22x28x22mm, 5130281515: 28x15x15mm, 5130281815: 28x18x15mm, 5130282215: 28x22x15mm, 5130282815: 28x28x15mm, 5130282816: 28x28x16mm, 5130281518: 28x15x18mm, 5130281818: 28x18x18mm, 5130282216: 28x22x16mm, 5130282218: 28x22x18mm, 5130282818: 28x28x18mm, 5130281522: 28x15x22mm, 5130281622: 28x16x22mm, 5130281822: 28x18x22mm, 5130282222: 28x22x22mm, 5130282822: 28x28x22mm, 5130281028: 28x10x28mm, 5130281228: 28x12x28mm, 5130281428: 28x14x28mm, 5130281528: 28x15x28mm, 5130281628: 28x16x28mm, 5130281828: 28x18x28mm, 5130282228: 28x22x28mm, 5130283528: 28x35x28mm, 5130353515: 35x35x15mm, 5130352818: 35x28x18mm, 5130353518: 35x35x18mm, 5130352222: 35x22x22mm, 5130352822: 35x28x22mm, 5130353522: 35x35x22mm, 5130351528: 35x15x28mm, 5130351828: 35x18x28mm, 5130352228: 35x22x28mm, 5130352828: 35x28x28mm, 5130353528: 35x35x28mm, 5130351535: 35x15x35mm, 5130351835: 35x18x35mm, 5130352235: 35x22x35mm, 5130352835: 35x28x35mm, 5130354235: 35x42x35mm, 5130422828: 42x28x28mm, 5130421542: 42x15x42mm, 5130421842: 42x18x42mm, 5130422242: 42x22x42mm, 5130422842: 42x28x42mm, 5130423542: 42x35x42mm, 5130425442: 42x54x42mm, 5130424222: 42x42x22mm, 5130424228: 42x42x28mm, 5130422235: 42x22x35mm, 5130422835: 42x28x35mm, 5130423535: 42x35x35mm, 5130424235: 42x42x35mm, 5130541554: 54x15x54mm, 5130541854: 54x18x54mm, 5130542254: 54x22x54mm, 5130542854: 54x28x54mm, 5130543554: 54x35x54mm, 5130544254: 54x42x54mm, 5130542842: 54x28x42mm, 5130543542: 54x35x42mm, 5130544242: 54x42x42mm, 5130545442: 54x54x42mm, 5130643564: 64x35x64mm, 5130644264: 64x42x64mm, 5130645464: 64x54x64mm, 5130672267: 67x22x67mm, 5130672867: 67x28x67mm, 5130673567: 67x35x67mm, 5130674267: 67x42x67mm, 5130675467: 67x54x67mm, 5130676754: 67x67x54mm, 5130705470: 70x54x70mm, 5130762876: 76x28x76mm, 5130763576: 76x35x76mm, 5130764276: 76x42x76mm, 5130765476: 76x54x76mm, 5130766476: 76x64x76mm, 5130766776: 76x67x76mm, 5130894289: 89x42x89mm, 5130895489: 89x54x89mm, 5130897689: 89x76x89mm, 513010828108: 108x28x108mm, 513010835108: 108x35x108mm, 513010842108: 108x42x108mm, 513010854108: 108x54x108mm, 513010867108: 108x67x108mm, 513010876108: 108x76x108mm, 513010889108: 108x89x108mm. 5243G series - Straight tap connector: 5243G1512: 15mmx1/2"captive nut, 5243G1534: 15mmx3/4"captive nut, 5243G1834: 18mmx3/4"captive nut, 5243G2234: 22mmx3/4"captive nut, 5243G221: 22mmx1"captive nut, 5243G281: 28mmx1"captive nut. 5002G series - Bent tap connector: 5002G1512: 15mmx1/2"captive nut, 5002G1534: 15mmx3/4"captive nut, 5002G1834: 18mmx3/4"captive nut, 5002G2234: 22mmx3/4"captive nut, 5002G221: 22mmx1"captive nut, 5002G281: 28mmx1"captive nut. 5301 series - End cap: 53016: 6mm, 53018: 8mm, 530110: 10mm, 530112: 12mm, 530114: 14mm, 530115: 15mm, 530116: 16mm, 530118: 18mm, 530122: 22mm, 530128: 28mm, 530135: 35mm, 530140: 40mm, 530142: 42mm, 530154: 54mm, 530164: 64mm, 530167: 67mm, 530176: 76mm, 530189: 89mm, 5301108: 108mm. 5060 series - Bend 180°: 50606: 6mm, 50608: 8mm, 506010: 10mm, 506012: 12mm, 506015: 15mm, 506016: 16mm, 506018: 18mm, 506022: 22mm, 506028: 28mm, 506035: 35mm, 506042: 42mm, 506054: 54mm.

Approval Holder:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

Range of brass bodied threaded fittings and a brass end feed fitting (C04069H00081A model only). The CL08069H192B4 model is chrome plated. The C04069H00081A model end feed fitting is for use with copper pipe (manufactured to EN 1057). The C04149H00191A model incorporates a plastic flow straightener. Maximum working pressure 10.0 bar, except for the C04149H00190A and C04149H00191A models which are open outlet use only. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AVONFLOW and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

C04149H00190A - 3/4 Brass Hose Union Nut & Tail: 7/8” BSP (F) inlet x 19.5mm barbed outlet, C04149H00191A - 1/2 Brass Hose Union Nut & Tail: 3/4” BSP (F) x 15.6mm barbed outlet, CL08069H185W2 - Brass Flange Plug 1/4 Bp14: 1/4" BSP (M), CL08069H186W2 - Brass Flanged Plug 3/8 Bp38: 3/8” BSP (M), CL08069H187W2 - Brass Flanged Plug 1/2 Bp12: 1/2" BSP (M), CL08069H188W2 - BRASS FLANGED PLUG 3/4" BP34: 3/4” BSP (M), CL08069H189W2 - Brass Flanged Plug 1 Bp1: 1” BSP (M), CL08069H190W2 - Brass Flange Plug 11/2 Bp112: 1-1/2" BSP (M), CL08069H183W2 - Brass Flanged Plug 1 1/4 Bp114: 1-1/4" BSP (M), CL41039H247W2 - Brass Hexagon Bush 1/4 X 1/8 Bb1418: 1/4” BSP (M) x 1/8” BSP (F), CL41039H228W2 - Brass Hexagon Bush 3/8 X 1/4 Bb3814: 3/8” BSP (M) x 1/4” BSP (F), CL41039H229W2 - Brass Hex Bush 1/2 X 1/8 Bb1218: 1/2” BSP (M) x 1/8” BSP (F), CL41039H230W2 - Brass Hexagon Bush 1/2 X 1/4 Bb1214: 1/2” BSP (M) x 1/4” BSP (F), CL41039H231W2 - Brass Hexagon Bush 1/2 X 3/8 Bb1238: 1/2” BSP (M) x 3/8” BSP (F), CL41039H232W2 - Brass Hexagon Bush 3/4 X 1/2 Bb3412: 3/4” BSP (M) x 1/2” BSP (F), CL41039H233W2 - Brass Hex Bush 1 X 1/2 Bb112: 1” BSP (M) x 1/2” BSP (F), CL41039H234W2 - Brass Hexagon Bush 1 X 3/4 Bb134: 1” BSP (M) x 3/4” BSP (F), CL41039H235W2 - Brass Hexagon Bush 1 1/4 X 1/2 Bb11412: 1-1/4” BSP (M) x 1/2” BSP (F), CL41039H236W2 - Brass Hexagon Bush 1 1/4 X 3/4 Bb11434: 1-1/4” BSP (M) x 3/4” BSP (F), CL41039H239W2 - Brass Hexagon Bush 1 1/4 X 1 Bb1141: 1-1/4” BSP (M) x 1” BSP (F), CL41039H240W2 - Brass Hexagon Bush 1 1/2 X 1/2 Bb11212: 1-1/2” BSP (M) x 1/2” BSP (F), CL41039H241W2 - Brass Hexagon Bush 1 1/2 X 1 Bb1121: 1-1/2” BSP (M) x 1” BSP (F), CL41039H242W2 - Brass Hex Bush 1 1/2 X 1 1/4 Bb112114: 1-1/2” BSP (M) x 1-1/4” BSP (F), CL41039H243W2 - Brass Hexagon Bush 2 X 1 Bb21: 2” BSP (M) x 1” BSP (F), CL41039H244W2 - Brass Hexagon Bush 2 X 1 1/4 Bb2114: 2” BSP (M) x 1-1/4” BSP (F), CL41039H245W2 - Brass Hexagon Bush 2 X 1 1/2 Bb2112: 2” BSP (M) x 1-1/2” BSP (F), CL08019H381W2 - Brass Socket 1/2 Bs12: 1/2” BSP (F), CL08019H382W2 - Brass Socket 3/4 Bs34: 3/4” BSP (F), CL08019H383W2 - Brass Socket 1 Bs1: 1” BSP (F), CL08019H384W2 - PLUMBRIGHT BRASS HEXAGON NIPPLE 1/4": 1/4” BSP (M), CL08019H385W2 - Brass Hexagon Nipple 1/2 Bn12: 1/2” BSP (M), CL08019H386W2 - Brass Hexagon Nipple 3/4 Bn34: 3/4” BSP (M), CL08019H387W2 - Brass Hexagon Nipple 1 Bn1: 1” BSP (M), CL41039H237W2 - Brass Hexagon Nipple 3/8 Bn38: 3/8” BSP (M), CL41039H238W2 - Brass Tap Extension Mxf 1/2 Be12: 1/2” BSP (F) x 1/2” BSP (M), CL08019H389A2 - PLUMBRIGHT BRASS BARREL NIPPLE 3/8": 3/8” BSP (M), CL08019H390A2 - PLUMBRIGHT BRASS BARREL NIPPLE 1/2": 1/2” BSP (M), CL08019H391A2 - PLUMBRIGHT BRASS BARREL NIPPLE 3/4": 3/4” BSP (M), CL08019H392A2 - PLUMBRIGHT BRASS BARREL NIPPLE 1": 1” BSP (M), CL08069H192B4 - Brass Cap-Cp 1/2 Cpbc12: 1/2” BSP (F), CL08069H193W2 - Brass Cap 1/4 Bc14: 1/4” BSP (F), CL08069H194W2 - Brass Cap 3/8 Bc38: 3/8” BSP (F), CL08069H192W2 - Brass Cap 1/2 Bc12: 1/2” BSP (F), CL08069H195W2 - Brass Cap 3/4 Bc34: 3/4” BSP (F), CL08069H196W2 - Brass Cap 1 Bc1: 1” BSP (F), C04069H00081A - P/R END FEED AIR RELEASE STOP END 15MM: 15mm.

Approval Holder:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company

Manufacturer:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company

CM(E) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Maximum operating parameters: Cast iron models: Maximum working pressure 6.0 bar @ 90°C. Maximum working pressure 10.0 bar @ 40°C. Stainless steel models (not self-priming variants): Maximum working pressure 10.0 bar @ 99°C. Maximum working pressure 16.0 bar @ 90°C. Stainless steel self-priming models (CM(E) 1, 3 & 5 (AISI 304) only): Maximum working pressure 10.0 or 16.0 bar @ 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251007701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” - 2” BSP (F) or NPT (F) inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model, manufacturing country and technical information on adhesive labels either on the terminal box or fan cover. Grundfos and Grundfos logo on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

31/10/2030

Model:

CM(E)1, CM(E)3 and CM(E)5: CM(E)1, cast iron / AISI304 2 – 8 stages. CM(E)3, cast iron / AISI304 2 – 8 stages. CM(E)5, cast iron / AISI304 2 – 8 stages. CM(E)1, AISI316 2 - 14 stages. CM(E)3, AISI316 2 - 14 stages. CM(E)5, AISI316 2 - 13 stages. CM(E)10 CM(E)15 and CM(E)25: CM(E)10, cast iron / AISI304 1 – 5 stages. CM(E)15, cast iron / AISI304 1 – 4 stages. CM(E)25, cast iron / AISI304 1 – 4 stages. CM(E)10, AISI316 1 – 8 stages. CM(E)15, AISI316 1 – 4 stages. CM(E)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI304 3 – 6 stages (S or O) CM(E)3, AISI304 3 – 6 stages (S or O) CM(E)5, AISI304 3 – 7 stages (S or O) Model key: CM/CME X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). S: Self-priming version (maximum suction lift 4 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal NPT thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage (electrical characteristics - not relevant for the WRAS approval): A/B/B1/B2/C1/E/E1/F/G/H/J/O/S/T/U/V/X. X12 = Motor information(electrical characteristics - not relevant for the WRAS approval): A/B/C/D/EF/G/H/I/J. X13 = Mains plug (electrical characteristics - not relevant for the WRAS approval): A/B/C/D. X14 = Sensor (electrical characteristics - not relevant for the WRAS approval): N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C1-A-A-N

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Undefinable Air Gap – See IRN’s

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Notes & Further Information

Two Fixed Head's with different finish and size as below FH SLRD01 C / BB / GM - (Dia 200mm) FH SLRD02 C - (Dia 250mm) FH SLRD03 C - (Dia 300mm) 225788 - (Wickes selling code for FH SLRD03 C) RP3 FH SLRD01 C - (Dia 200mm, chrome 3) FH TDRD01 C - (Dia 157mm) FH TDRD01 C / G - (Dia 200mm) FH TDRD03 C - (Dia 300mm)

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Notes & Further Information

The suffixes of ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Pull out plastic body handset for kitchen tap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Notes & Further Information

** Representative all models are available with the following finish code: CP-Polished Chrome BN-Brushed Nickel MB-Matte Black ORB-Oil Rubber Bronze PB-Polished Brass WP-Weathered Pewter BB-Brushed Brass

Approval Holder:

Kaiping Boyu Hose Technology Co., Ltd.

Company Name

Kaiping Boyu Hose Technology Co., Ltd.

Address

5 Dongcheng Road, Shuinuancheng, Shuikou Town, Kaiping City Guangdong Province

Country

China

View All Listings by this Company

Manufacturers:

Kaiping Boyu Hose Technology Co., Ltd.

Section:

1750 Taps

Description:

A Range of Draw off bib tap(s)

Wall mounted. Undefinable Air Gap - see IRNs

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Approval Holder:

Zhejiang Tasan Flow Tech Co., Ltd

Company Name

Zhejiang Tasan Flow Tech Co., Ltd

Address

No.25 Jinbo Road Bingang Industrial Zone Shamen Town Yuhuan City Zhejiang Province

Country

China

View All Listings by this Company

Manufacturers:

Zhejiang Tasan Flow Tech Co., Ltd

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/10/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control

Wall mounted Undefinable Air Gap - See IRN's Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company