‘Hansen easy fit’ range of polypropylene compression fittings with EPDM ‘O’-rings for use with metric PE80 (20mm-63mm) and PE100 (32mm-110mm) pipe to AS/NZS:4130 and plastic pipe inserts. For above and below ground use. Maximum working pressure: See models. Maximum operating temperature: Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240504011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Hansen, size, date of manufacture on body of fitting.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

HMDE20 20mm Elbow 16 bar. HMDE25 25mm Elbow 16 bar. HMDE32 32mm Elbow 16 bar. HMDE40 40mm Elbow 16 bar. HMDE50 50mm Elbow 16 bar. HMDE63 63mm Elbow 16 bar. HMDE75 75mm Elbow 12.5 bar. HMDE90 90mm Elbow 12.5 bar. HMDE110 110mm Elbow 12.5 bar. HMDEC20 20mm End Cap 16 bar. HMDEC25 25mm End Cap 16 bar. HMDEC32 32mm End Cap 16 bar. HMDEC40 40mm End Cap 16 bar. HMDEC50 50mm End Cap 16 bar. HMDEC63 63mm End Cap 16 bar. HMDEC75 75mm End Cap 12.5 bar. HMDEC90 90mm End Cap 12.5 bar. HMDEC110 110mm End Cap 12.5 bar. HMDFC2015 20mm x 1/2" Female Threaded Coupling 16 bar. HMDFC2020 20mm x 3/4" Female Threaded Coupling 16 bar. HMDFC2515 25mm x 1/2" Female Threaded Coupling 16 bar. HMDFC2520 25mm x 3/4" Female Threaded Coupling 16 bar. HMDFC2525 25mm x 1" Female Threaded Coupling 16 bar. HMDFC3220 32mm x 3/4" Female Threaded Coupling 16 bar. HMDFC3225 32mm x 1" Female Threaded Coupling 16 bar. HMDFC3232 32mm x 1-1/4" Female Threaded Coupling 16 bar. HMDFC4025 40mm x 1" Female Threaded Coupling 16 bar. HMDFC4032 40mm x 1-1/4" Female Threaded Coupling 16 bar. HMDFC4040 40mm x 1-1/2" Female Threaded Coupling 16 bar. HMDFC5032 50mm x 1-1/4" Female Threaded Coupling 16 bar. HMDFC5040 50mm x 1-1/2" Female Threaded Coupling 16 bar. HMDFC5050 50mm x 2" Female Threaded Coupling 16 bar. HMDFC6340 63mm x 1-1/2" Female Threaded Coupling 16 bar. HMDFC6350 63mm x 2" Female Threaded Coupling 16 bar. HMDFC6363 63mm x 2-1/2" Female Threaded Coupling 16 bar. HMDFC7550 75mm x 2" Female Threaded Coupling 12.5 bar. HMDFC7563 75mm x 2-1/2" Female Threaded Coupling 12.5 bar. HMDFC9050 90mm x 2" Female Threaded Coupling 12.5 bar. HMDFC9063 90mm x 2-1/2" Female Threaded Coupling 12.5 bar. HMDFC11050 110mm x 2" Female Threaded Coupling 12.5 bar. HMDFE2015 20mm x 1/2" Female Threaded Elbow 16 bar. HMDFE2020 20mm x 3/4" Female Threaded Elbow 16 bar. HMDFE2515 25mm x 1/2" Female Threaded Elbow 16 bar. HMDFE2520 25mm x 3/4" Female Threaded Elbow 16 bar. HMDFE2525 25mm x 1" Female Threaded Elbow 16 bar. HMDFE3220 32mm x 3/4" Female Threaded Elbow 16 bar. HMDFE3225 32mm x 1" Female Threaded Elbow 16 bar. HMDFE3232 32mm x 1-1/4" Female Threaded Elbow 16 bar. HMDFE4032 40mm x 1-1/4" Female Threaded Elbow 16 bar. HMDFE4040 40mm x 1-1/2" Female Threaded Elbow 16 bar. HMDFE5040 50mm x 1-1/2" Female Threaded Elbow 16 bar. HMDFE5050 50mm x 2" Female Threaded Elbow 16 bar. HMDFE6340 63mm x 1-1/ 2" Female Threaded Elbow 16 bar. HMDFE6350 63mm x 2" Female Threaded Elbow 16 bar. HMDFE7563 75mm x 2-1/2" Female Threaded Elbow 12.5 bar. HMDFT2015 20mm x 1/2" Female Threaded Tee 16 bar. HMDFT2020 20mm x 3/4" Female Threaded Tee 16 bar. HMDFT2515 25mm x 1/2" Female Threaded Tee 16 bar. HMDFT2520 25mm x 3/4" Female Threaded Tee 16 bar. HMDFT2525 25mm x 1" Female Threaded Tee 16 bar. HMDFT3215 32mm x 1/2" Female Threaded Tee 16 bar. HMDFT3220 32mm x 3/4" Female Threaded Tee 16 bar. HMDFT3225 32mm x 1" Female Threaded Tee 16 bar. HMDFT3232 32mm x 1-1/4" Female Threaded Tee 16 bar. HMDFT4025 40mm x 1" Female Threaded Tee 16 bar. HMDFT4032 40mm x 1-1/4" Female Threaded Tee 16 bar. HMDFT4040 40mm x 1-1/2" Female Threaded Tee 16 bar. HMDFT5032 50mm x 1-1/4" Female Threaded Tee 16 bar. HMDFT5040 50mm x 1-1/2" Female Threaded Tee 16 bar. HMDFT5050 50mm x 2" BSPT Female Threaded Tee 16 bar. HMDFT6340 63mm x 1-1/2" BSPT Female Threaded Tee 16 bar. HMDFT6350 63mm x 2" BSPT Female Threaded Tee 16 bar. HMDFT6363 63mm x 2-1/2" Female Threaded Tee 16 bar. HMDFT7550 75mm x 2" Female Threaded Tee 12.5 bar. HMDFT7563 75mm x 2-1/2" Female Threaded Tee 12.5 bar. HMDFT9063 90mm x 2-1/2" Female Threaded Tee 12.5 bar. HMDMC1620 16mm x 3/4" Male Threaded Coupling 16 bar. HMDMC2015 20mm x 1/2" Male Threaded Coupling 16 bar. HMDMC2020 20mm x 3/4" Male Threaded Coupling 16 bar. HMDMC2520 25mm x 3/4" Male Threaded Coupling 16 bar. HMDMC2525 25mm x 1" Male Threaded Coupling 16 bar. HMDMC3215 32mm x 1/2"Male Threaded Coupling 16 bar. HMDMC3220 32mm x 3/4" Male Threaded Coupling 16 bar. HMDMC3225 32mm x 1" Male Threaded Coupling 16 bar. HMDMC3232 32mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC3240 32mm x 1-1/2"Male Threaded Coupling 16 bar. HMDMC4025 40mm x 1" Male Threaded Coupling 16 bar. HMDMC4032 40mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC4040 40mm x 1-1/2" Male Threaded Coupling 16 bar. HMDMC4050 40mm x 2" Male Threaded Coupling 16 bar. HMDMC5032 50mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC5040 50mm x 1-1/2" Male Threaded Coupling 16 bar. HMDMC5050 50mm x 2" Male Threaded Coupling 16 bar. HMDMC6332 63mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC6340 63mm x 1-1/2" Male Threaded Coupling 16 bar. HMDMC6350 63mm x 2" Male Threaded Coupling 16 bar. HMDMC6363 63mm x 2-1/2" Male Threaded Coupling 16 bar. HMDMC7550 75mm x 2" Male Threaded Coupling 12.5 bar. HMDMC7563 75mm x 2-1/2" Male Threaded Coupling 12.5 bar. HMDMC9050 90mm x 2" Male Threaded Coupling 12.5 bar. HMDMC9063 90mm x 2-1/2" Male Threaded Coupling 12.5 bar. HMDMC11050 110mm x 2" Male Threaded Coupling 12.5 bar. HMDME2015 20mm x 1/2" Male Threaded Elbow 16 bar. HMDME2020 20mm x 3/4" Male Threaded Elbow 16 bar. HMDME2520 25mm x 3/4" Male Threaded Elbow 16 bar. HMDME2525 25mm x 1" Male Threaded Elbow 16 bar. HMDME3220 32mm x 3/4" Male Threaded Elbow 16 bar. HMDME3225 32mm x 1" Male Threaded Elbow 16 bar. HMDME3232 32mm x 1-1/4" Male Threaded Elbow 16 bar. HMDME4025 40mm x 1" Male Threaded Elbow 16 bar. HMDME4032 40mm x 1-1/4" Male Threaded Elbow 16 bar. HMDME4040 40mm x 1-1/2" Male Threaded Elbow 16 bar. HMDME5040 50mm x 1-1/2" Male Threaded Elbow 16 bar. HMDME5050 50mm x 2" Male Threaded Elbow 16 bar. HMDME6340 63mm x 1-1/2" Male Threaded Elbow 16 bar. HMDME6350 63mm x 2" Male Threaded Elbow 16 bar. HMDME6363 63mm x 2-1/2" Male Threaded Elbow 16 bar. HMDME7563 75mm x 2-1/2" Male Threaded Elbow 12.5 bar. HMDMT2015 20mm x 1/2" Male Threaded Tee 16 bar. HMDMT2020 20mm x 3/4" Male Threaded Tee 16 bar. HMDMT2515 25mm x 1/2" Male Threaded Tee 16 bar. HMDMT2520 25mm x 3/4" Male Threaded Tee 16 bar. HMDMT2525 25mm x 1" Male Threaded Tee 16 bar. HMDMT3220 32mm x 3/4" Male Threaded Tee 16 bar. HMDMT3225 32mm x 1" Male Threaded Tee 16 bar. HMDMT3232 32mm x 1-1/4" Male Threaded Tee 16 bar. HMDMT4025 40mm x 1" Male Threaded Tee 16 bar. HMDMT4032 40mm x 1-1/4" Male Threaded Tee 16 bar. HMDMT4040 40mm x 1-1/2" Male Threaded Tee 16 bar. HMDMT5040 50mm x 1-1/2" Male Threaded Tee 16 bar. HMDMT5050 50mm x 2" Male Threaded Tee 16 bar. HMDMT6340 63mm X 1-1/12" Male Threaded Tee 16 bar. HMDMT6350 63mm x 2" Male Threaded Tee 16 bar. HMDMT7563 75mm x 2-1/2" Male Threaded Tee 12.5 bar. HMDRBE2015 20mm x 1/2" Red. Bracket Elbow 16 bar. HMDRBE2515 25mm x 1/2" Red. Bracket Elbow 16 bar. HMDRBE2520 25mm x 3/4" Red. Bracket Elbow 16 bar. HMDRC2520 25mm x 20mm Reducing Straight Coupling 16 bar. HMDRC3220 32mm x 20mm Reducing Straight Coupling 16 bar. HMDRC3225 32mm x 25mm Reducing Straight Coupling 16 bar. HMDRC4025 40mm x 25mm Reducing Straight Coupling 16 bar. HMDRC4032 40mm x 32mm Reducing Straight Coupling 16 bar. HMDRC5032 50mm x 32mm Reducing Straight Coupling 16 bar. HMDRC5040 50mm x 40mm Reducing Straight Coupling 16 bar. HMDRC6332 63mm x 32mm Reducing Straight Coupling 16 bar. HMDRC6340 63mm x 40mm Reducing Straight Coupling 16 bar. HMDRC6350 63mm x 50mm Reducing Straight Coupling 16 bar. HMDRC7563 75mm x 63mm Reducing Straight Coupling 12.5 bar. HMDRC9063 90mm x 63mm Reducing Straight Coupling 12.5 bar. HMDRC9075 90mm x 75mm Reducing Straight Coupling 12.5 bar. HMDRC11075 110mm x 75mm Reducing Straight Coupling 12.5 bar. HMDRC11090 110mm x 90mm Reducing Straight Coupling 12.5 bar. HMDRSC20 20mm Repair Slip Coupling 16 bar. HMDRSC25 25mm Repair Slip Coupling 16 bar. HMDRSC32 32mm Repair Slip Coupling 16 bar. HMDRSC40 40mm Repair Slip Coupling 16 bar. HMDRSC50 50mm Repair Slip Coupling 16 bar. HMDRSC63 63mm Repair Slip Coupling 16 bar. HMDRSC75 75mm Repair Slip Coupling 12.5 bar. HMDRSC90 90mm Repair Slip Coupling 12.5 bar. HMDRSC110 110mm Repair Slip Coupling 12.5 bar. HMDRT2520 25mm x 25mm x 20mm Reducing Tee 16 bar. HMDRT3220 32mm x 32mm x 20mm Reducing Tee 16 bar. HMDRT3225 32mm x 32mm x 25mm Reducing Tee 16 bar. HMDRT4032 40mm x 40mm x 32mm Reducing Tee 16 bar. HMDRT5032 50mm x 50mm x 32mm Reducing Tee 16 bar. HMDRT5040 50mm x 50mm x 40mm Reducing Tee 16 bar. HMDRT6350 63mm x 63mm x 50mm Reducing Tee 16 bar. HMDRT7563 75mm x 75mm x 63mm Reducing Tee 12.5 bar. HMDRT9075 90mm x 90mm x 75mm Reducing Tee 12.5 bar. HMDRT11063 110mm x 110mm x 63mm Reducing Tee 12.5 bar. HMDRT11090 110mm x 110mm x 90mm Reducing Tee 12.5 bar. HMDC20 20mm Straight Coupling 16 bar. HMDC25 25mm Straight Coupling 16 bar. HMDC32 32mm Straight Coupling 16 bar. HMDC40 40mm Straight Coupling 16 bar. HMDC50 50mm Straight Coupling 16 bar. HMDC63 63mm Straight Coupling 16 bar. HMDC75 75mm Straight Coupling 12.5 bar. HMDC90 90mm Straight Coupling 12.5 bar. HMDC110 110mm Straight Coupling 12.5 bar. HMDT20 20mm Tee 16 bar. HMDT25 25mm Tee 16 bar. HMDT32 32mm Tee 16 bar. HMDT40 40mm Tee 16 bar. HMDT50 50mm Tee 16 bar. HMDT63 63mm Tee 16 bar. HMDT75 75mm Tee 12.5 bar. HMDT90 90mm Tee 12.5 bar. HMDT110 110mm Tee 12.5 bar.

Approval Holder:

Hansen Products (NZ) Limited

Company Name

Hansen Products (NZ) Limited

Address

16 Union East Street Whangarei 0110 New Zealand

View All Listings by this Company

Manufacturer:

Hansen Products (NZ) Limited

Company Name

Hansen Products (NZ) Limited

Address

16 Union East Street Whangarei 0110 New Zealand

View All Listings by this Company

Universal plastic compression adaptor kits for use with SAB A16 fitting body (not included as part of this approval) and galvanised steel pipe (manufactured to EN 10255). Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240504707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

When used with galvanised pipe and for wholesome water consult your local water company.

Size:

½” BSP M.

Marking:

SAB, SAB logo, nominal size range moulded on nut

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

S16 UF Kit Universal conversion Kit Ø15-21, model U139000015.

Approval Holder:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Manufacturer:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Allpex range of end feed capillary fittings and brazing fittings for use with copper tube (manufactured to BS EN 1057). EG fittings have gunmetal bodies, ED fittings have DZR brass bodies & EB fittings have brass bodies. For above ground use only. Maximum working pressure: 6mm – 34mm 25Bar, 34mm -54mm 25Bar, 54mm – 108mm 16Bar, 108mm – 159mm 5 Bar. Maximum operating temperature 30°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240502052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model list

Marking:

1254, AL logo and size on body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

EC10 – Straight Coupler CxC EC10 – 6mm EC10 – 8mm EC10 – 10mm EC10 –12mm EC10 –15mm EC10 –18mm EC10 –22mm EC10 –28mm EC10 –35mm EC10 –42mm EC10 –54mm EC10 –66.7mm EC10 –76.1mm EC10 –108mm EC10 –133mm EC10 –159mm EC10S – Slip Coupler without Stop EC10S –15mm EC10S –18mm EC10S –22mm EC10S –28mm EC10S –35mm EC10S –42mm EC10S –54mm EC10U -Straight Union CxC Copper Tail EC10U –15mm EC10U –22mm EC10U –28mm EC10U –35mm EC10U –42mm EC10U –54mm EC10X – Full Crossover CxC EC10X –10mm EC10X –12mm EC10X –15mm EC10X –18mm EC10X –22mm EC10XF – Part Crossover FTGxC EC10XF –10mm EC10XF –12mm EC10XF –15mm EC10XF –18mm EC10XF –22mm EC11 – Reducing Coupler CxC (Sizes EC11 - 108 = 10x8mm) EC11 –108 EC11 –128 EC11 –1210 EC11 –158 EC11 –1510 EC11 –1512 EC11 –1810 EC11 –1812 EC11 –1815 EC11 –2215 EC11 –2218 EC11 –2815 EC11 –2818 EC11 –2822 EC11 –3515 EC11 –3522 EC11 –3528 EC11 –4215 EC11 –4222 EC11 –4228 EC11 –4235 EC11 –5415 EC11 –5422 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –6742 EC11 –6754 EC11 –7635 EC11 –7642 EC11 –7654 EC11 –7667 EC11 –10854 EC11 –10867 EC11 –10876 EC11F – Fitting Reducer FTG x C (Sizes EC11F – 86 = 8x6mm) EC11F –86 EC11F –106 EC11F –108 EC11F –128 EC11F –1210 EC11F –158 EC11F –1510 EC11F –1512 EC11F –1810 EC11F –812 EC11F –1815 EC11F –2212 EC11F –2215 EC11F –2218 EC11F –2815 EC11F –2818 EC11F –1822 EC11F –3515 EC11F –3518 EC11F –3522 EC11F –3528 EC11F –4215 EC11F –4218 EC11F –4222 EC11F –4228 EC11F –4235 EC11F –5415 EC11F –5418 EC11F –5422 EC11F –5428 EC11F –5435 EC11F –5442 EC11F –6728 EC11F –6735 EC11F –6742 EC11F –6754 EC11F –7635 EC11F –7642 EC11F –7654 EC11F –7667 EC11F –10842 EC11F –10854 EC11F –10867 EC11F –10876 EC11F –13367 EC11F – 13376 EC11F –133108 EC11F –15954 EC11F –15967 EC11F –15976 EC11F –159108 EC11F –159133 EC11FL – Long Fitting Reducer FTG x C (EC11FL – 158 = 15x8mm) EC11FL –158 EC11FL –1510 EC11FL –2215 EC11MI - Metric x Imperial Coupler C x C: EC11MI -15D – 15mmx1/2” EC11MI -22E – 22mmx3/4” EC11MI -28F – 28mmx1” EC11MI -35G – 35mmx11/4” EC12U – Straight male union C x MI (taper) cone joint, copper tail (boiler union): EC12U –15D - 15mmx1/2”BSP EC12U –22E – 22mmx ¾”BSP EC12U –22F – 22mmx1”BSP EC12U –28F – 28mmx1”BSP EC12U –35G – 35mmx11/4”BSP EC12U –42H – 42mmx11/2”BSP EC12U –54I – 54mmx2”BSP EC14U – Straight female union, C x FI cone joint, Copper tail: EC14U –15D – 15mmx1/2”BSP EC14U –22E – 22mmx ¾”BSP EC14U –28F – 28mmx1”BSP EC14U –35G – 35mmx11/4”BSP EC14U –42H – 42mmx11/2”BSP EC14U –54I – 54mmx2”BSP EC16 – Straight tep connector, C x FI (swivel) + Washer: EC16 –15D – 15mmx1/2”BSP EC16 –15E – 15mmx3/4”BSP EC16 –22E – 22mmx ¾”BSP EC16C – Cylinder Connector, C x FI (Swivel): EC16C –22F – 22mmx1”BSP EC16C –28F – 28mmx1”BSP EC16CF – Fitting Cylinder Connector, FTG x FI (Swivel): EC16CF –22F – 22mmx1”BSP EC16G – Gas meter union, C x FI (Swivel + Washer to BS746: EC16G –22E – 22mmx ¾”BSP EC16G –22F – 22mmx1”BSP EC16G –28F – 28mmx1”BSP EC17 – End Cap: EC17 – 6mm EC17 – 8mm EC17 – 10mm EC17 –12mm EC17 –15mm EC17 –18mm EC17 –22mm EC17 –28mm EC17 –35mm EC17 –42mm EC17 –54mm EC17 –66.7mm EC17 –76.1mm EC17 –108mm EC17 –133mm EC17 –159mm EC17A – Copper Airvent Cap, C x Cap Knurled cap air release: EC17A –15 - 15mm EC17A –22 – 22mm EC17AF - Copper Airvent Plug, Ftg x Cap Knurled cap air release: EC17AF –15 - 15mm EC20 – Elbow, C x C: EC20 – 6mm EC20 – 8mm EC20 – 10mm EC20 –12mm EC20 –15mm EC20 –18mm EC20 –22mm EC20 –28mm EC20 –35mm EC20 –42mm EC20 –54mm EC20 –66.7mm EC20 –76.1mm EC20 –108mm EC20 –133mm EC20 –159mm EC20F – Fitting (Street) Elbow, Ftg x C: EC20F – 10mm EC20F –12mm EC20F –15mm EC20F –18mm EC20F –22mm EC20F –28mm EC20F –35mm EC20F –42mm EC20F –54mm EC20F –66.7mm EC20F –76.1mm EC20F –108mm EC20FLS – Long Shank Fitting Elbow, Ftg (long) x C: EC20FLS –15mm EC20FLS –22mm EC20FLS –28mm EC20L – Long Radius Bend, C x C: EC20L – 10mm EC20L –12mm EC20L –15mm EC20L –18mm EC20L –22mm EC20L –28mm EC20L –35mm EC20L –42mm EC20L –54mm EC20L –66.7mm EC20L –76.1mm EC20L –108mm EC20L –133mm EC20L –159mm EC20LF- Long Radius Fitting Bend, Ftg x C: EC20LF – 10mm EC20LF –12mm EC20LF –15mm EC20LF –18mm EC20LF –22mm EC20LF –28mm EC20LF –35mm EC20LF –42mm EC20LF –54mm EC20LF –66.7mm EC20LF –76.1mm EC20LF –108mm EC25 – Obtuse Elbow (45/135 drg), C x C: EC25 – 10mm EC25–12mm EC25 –15mm EC25 –18mm EC25–22mm EC25 –28mm EC25 –35mm EC25 –42mm EC25 –54mm EC25 –66.7mm EC25 –76.1mm EC25 –108mm EC25 –133mm EC25 –159mm EC25F – Fitting Obtuse Elbow (45/135 drg), Ftg x C: EC25F – 10mm EC25F–12mm EC25F –15mm EC25F –18mm EC25F–22mm EC25F –28mm EC25F –35mm EC25F –42mm EC25F –54mm EC25F –66.7mm EC25F –76.1mm EC25F –108mm EC26 – Bent tap connector, C x Fi (swivel) + washer: EC26 –15D – 15mm x ½”BSP EC26 –15E – 15mm x ¾”BSP EC26 –22E – 22mm x ¾”BSP EC26C – Bent cylinder connector, C x Fi (swivel): EC26C –15E – 15mm x 3/4”BSP EC26C –22E – 22mm x ¾”BSP EC30 – Equal Tee, C x C x C: EC30 – 6mm EC30 – 8mm EC30 – 10mm EC30 –12mm EC30 –15mm EC30 –18mm EC30 –22mm EC30 –28mm EC30 –35mm EC30 –42mm EC30 –54mm EC30 –66.7mm EC30 –76.1mm EC30 –108mm EC30 –133mm EC30 –159mm EC31 – Reducing Tee, C x C x C (e.g. EC31 – 8810 – 8mm x 8mm x 10mm): EC31 –8810 EC31 –1088 EC31 –10810 EC31 –101012 EC31 –101015 EC31 –121010 EC31 –121012 EC31 –12128 EC31 –121210 EC31 –121215 EC31 –151010 EC31 –151015 EC31 –151212 EC31 –151215 EC31 –15158 EC31 –151510 EC31 –151512 EC31 –151518 EC31 –151522 EC31 –181515 EC31 –181518 EC31 –181812 EC31 –181815 EC31 –181822 EC31 –221515 EC31 –221522 EC31 –222210 EC31 –222215 EC31 –222218 EC31 –222228 EC31 –222235 EC31 –281515 EC31 –281522 EC31 –281528 EC31 –282215 EC31 –282222 EC31 –282228 EC31 –282815 EC31 –282822 EC31 –282835 EC31 –351535 EC31 –352222 EC31 –352235 EC31 –352822 EC31 –352828 EC31 –352835 EC31 –353515 EC31 –353522 EC31 –353528 EC31 –353542 EC31 –422242 EC31 –422828 EC31 –422842 EC31 –423535 EC31 –423542 EC31 –424215 EC31 –424222 EC31 –424228 EC31 –424235 EC31 –424254 EC31 –543535 EC31 –543554 EC31 –544242 EC31 –544254 EC31 –545415 EC31 –545422 EC31 –545428 EC31 –545435 EC31 –545442 EC31 –674267 EC31 –675467 EC31 –676728 EC31 –676735 EC31 –676742 EC31 –676754 EC31 –765476 EC31 –766776 EC31 –767642 EC31 –767654 EC31 –767667 EC31 –10810854 EC31 –10810867 EC31 –10810876 EC31 –13313367 EC31 –13313376 EC31 –133133108 EC31 –15915976 EC31 –159159108 EC31 –159159133 EB14 – Female Coupler, C x Fi: EB14 –8B – 8mm x ¼”BSP(F) EB14 –10B – 10mm x ¼”BSP(F) EB14 –10C – 10mm x 3/8”BSP(F) EB14 –12B – 12mm x ¼”BSP(F) EB14 –12C – 12mm x 3/8”BSP(F) EB14 –15B – 15mm x ¼”BSP(F) EB10M – Brass Manifold (e.g EB10m-22102 – 22mm x 10-2 mm): EB10M –22102 EB10M –22103 EB10M –22104 EB10M –2282 EB10M –2283 EB10M –2284 EB10P – Manifold Plug: EB10P – 108 – 10mm x 8mm EB11F2 – 2 in 1 Fitting reducer, Ftg x C: EB11F2 –15108 – 15mm x 10-8mm EG12 – Straight male coupler, C x Mi (taper): EG12 –15C – 15mm x 3/8”BSP (M) EG12 –15D – 15mm x 1/2”BSP (M) EG12 –15E – 15mm x 3/4”BSP (M) EG12 –22E – 22mm x ¾”BSP(M) EG12 –28F – 28mm x 1”BSP(M) EG12 –35G – 35mm x 11/4”BSP(M) EG12 –42H – 42mm x 11/2”BSP(M) EG12 –54I – 54mm x 2”BSP(M) EG12 –67J – 67mm x 21/2”BSP (M) EG12 –76K – 76.1mm x 3”BSP (M) EG12 –108L – 108 x 4”BSP(M) EG14 – Straight Female Coupler C x Fi: EG14 –15C – 15mm x 3/8”BSP (M) EG14 –15D – 15mm x 1/2”BSP (M) EG14 –15E – 15mm x 3/4”BSP (M) EG14 –22E – 22mm x ¾”BSP(M) EG14 –28F – 28mm x 1”BSP(M) EG14 –35G – 35mm x 11/4”BSP(M) EG14 –42H – 42mm x 11/2”BSP(M) EG14 –54I – 54mm x 2”BSP(M) EG14 –67J – 67mm x 21/2”BSP (M) EG14 –76K – 76.1mm x 3”BSP (M) EG14 –108L – 108 x 4”BSP(M) EB12 – Straight male coupler, C x MI (taper): EB12 –8B – 8mm x ¼”BSP(M) EB12 –10B – 10mm x ¼”BSP (M) EB12 –10C – 10mm x 3/8”BSP (M) EB12 –12B – 12mm x ¼”BSP(M) EB12 –12C – 12mm x 3/8”BSP (M) EB12 –15B – 15mm x ¼”BSP(M) EB12F – Male Stub adaptor Ftg x MI (taper): EB12F –8B – 8mm x ¼”BSP(M) EB12F –10B – 10mm x ¼”BSP (M) EB12F –10C – 10mm x 3/8”BSP (M) EB12F –12B – 12mm x ¼”BSP(M) EB12F –12C – 12mm x 3/8”BSP (M) EB12F –15B – 15mm x ¼”BSP(M) EB17A – Brass Airvent cap, C x Cap: EB17A –15mm EB17A –22mm EB17AF – Brass Airvent Plug, Ftg x Cap: EB17AF –15mm

Approval Holder:

Allpex Ltd.

Company Name

Allpex Ltd.

Address

261 Water Road, Abbeydale Industrial Estate, Wembley Middlesex

Postcode

HA0 1HX

Country

United Kingdom

Phone

00 44 208 810 4546

General Email

product@allpex.com

View All Listings by this Company

Range of dual flush, WC outlet valves with an ABS body. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240502702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP(M)

Marking:

Bestter logo & model on body.

Installation Requirements:

R001 R571 R581

Expiry date:

31/05/2029

Model:

T8105 T8106

Approval Holder:

Bestter(Xiamen) Technology lnc.

Company Name

Bestter(Xiamen) Technology lnc.

Address

9-10 Building Siming, Tong‘an Industrial Center, Xiamen,Fujian,China

View All Listings by this Company

Manufacturer:

Bestter(Xiamen) Technology lnc.

Company Name

Bestter(Xiamen) Technology lnc.

Address

9-10 Building Siming, Tong‘an Industrial Center, Xiamen,Fujian,China

View All Listings by this Company

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Company logo (AO Smith), model, and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

IR 12-160,IR 12-200,IR 20-160,IR 20-200,IR 24-245,IR 24-285,IR 32-245,IR 32-285 & IR 32-380

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Company logo (A.O. Smith), model and technical information on body

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

BFC 28, BFC 30, BFC 50, BFC 60, BFC 80, BFC 100, BFC 120, SGS 28, SGS 30,SGS 50, SGS 60, SGS 80, SGS 100 & SGS 120

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP(M) inlet.

Marking:

Company logo (AO Smith), model and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SGE 40 & SGE 60

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Company logo (AO Smith), model and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

IT 1500, IT 2000, IT 2500, IT 3000, ST 1500, ST 2000, ST 2500 & ST 3000

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of glass enamel lined direct water heaters fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Company logo (AO Smith), model and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

IT 300, IT 400, IT 500, IT 600, IT 750, IT 1000, ITE 400, ITE 500, ITE 600, ITE 750, ITE 1000, ITS 300, ITS 400, ITS 500, ITS 600, ITS 750, ITS 1000, ST 300, ST 400, ST 500, ST 600, ST 750 & ST 1000

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The products are supplied with isolation valve on both the DHW and CH circuits. The secondary circuit (DHW) incorporates a plastic flow restrictor and stainless-steel strainer. Some models (see model section) are supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressures: DHW: 10.0 Bar CH: 2.5 Bar Maximum operating temperature: DHW: 65.0°C CH: 85.0°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240502715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DHW: 15mm compression. CH: 22mm compression

Marking:

Range name on front cover, Model, Max pressure, Max temperature and product information on data plate on body

Installation Requirements:

R001 R140 R360

Expiry date:

31/05/2029

Model:

Models without a filing loop supplied: 0010016113 - Glow-worm ESSENTIAL 24c -A (H-GB) 0010016115 - Glow-worm ESSENTIAL 28c -A (H-GB) 0010016127 - Heatline CAPRIZ 2 24c -A (H-GB) 0010016128 - Heatline MONZA 2 24c -A (H-GB) 0010016129 - Heatline CAPRIZ 2 28c -A (H-GB) 0010016130 - Heatline MONZA 2 28c -A (H-GB) 0010021401 - Glow-worm EASICOM 3 24c -A (H-GB) 0010021402 - Glow-worm EASICOM 3 28c -A (H-GB) 0010020392 - Vaillant VUW 256/6-3 (H-GB) ecoFIT sustain 825 0010020393 - Vaillant VUW 306/6-3 (H-GB) ecoFIT sustain 830 0010020394 - Vaillant VUW 356/6-3 (H-GB) ecoFITsustain 835 Models with a filling loop supplied: 0010020389 - Vaillant VUW 256/6-3 (H-GB) ecoFIT pure 825 0010020390 - Vaillant VUW 306/6-3 (H-GB) ecoFIT pure 830 0010020391 - Vaillant VUW 356/6-3 (H-GB) ecoFIT pure 835 0010019813 - Vaillant VUW 306/6-3 (P-GB) ecoFIT pure 830 P 0010021204 - Glow-worm BETACOM 4 24c -A (H-GB) 0010021205 - Glow-worm BETACOM 4 30c -A (H-GB) 0010021404 - Glow-worm ULTIMATE 3 30c -A (H-GB) 0010021405 - Glow-worm ULTIMATE 3 35c -A (H-GB) 0010027591 - Glow-worm ENERGY 2 30c -A (P-GB) 0010035896 - Glow-worm ENERGY 7 25c (H-GB) 0010035897 - Glow-worm ENERGY 7 30c (H-GB) 0010035898 - Glow-worm ENERGY 7 35c (H-GB)

Approval Holder:

Vaillant GmbH

Company Name

Vaillant GmbH

Address

Berghauser Strasse, 40 D-42859 Remscheid

Country

Germany

Phone

Tel: +49 2191 182126

View All Listings by this Company

Range of in-line and concentric water meters with composite bodies, TPE gasket and NBR ‘O’-ring(s). The products have an integral plastic filter. The inlet of the in-line models includes a non-return valve. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

JV600 Q3=2,5 R***: ¾” BSP (M). JV600 Q3=4 R***: 1” BSP (M). JV600 Q3=6,3 R***: 1¼” BSP (M). JV600 Q3=2,5 Concentric R***: ¾” BSP (M). JV600e Q3=2,5 R*** 3/4” BSP (M) JV600e Q3=2,5 Concentric R*** 3/4” BSP (M) JV600e Q3=4 R*** 1” BSP (M) JV600e Q3=6,3 R*** 1 1/4” BSP (M)

Marking:

Janz logo, maximum pressure, CE and other technical information on cover.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

In-line water meter: JV600 Q3=2,5 R***. JV600 Q3=4 R***. JV600 Q3=6,3 R***. Concentric water meter: JV600 Q3=2,5 Concentric R***. Models added October 2024 JV600e Q3=2,5 R*** JV600e Q3=2,5 Concentric R*** JV600e Q3=4 R*** JV600e Q3=6,3 R*** Where *** relates to Class of Accuracy of the water meter and can be replaced by: 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 4100, 500, 630, 800.

Approval Holder:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Manufacturer:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Range of water meters with brass bodies, plastic turbines and plastic strainers on inlets. The products have an integral plastic filter. The inlet includes a non-return valve. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP M

Marking:

JANZ logo, Max working pressure, model code, CE and other technical information on meter face

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

JV400 Q3=2,5 R***, JV400 Q3=2,5 Concentric R***, JV400 Q3=4 R***, JV400 Q3=6,3 R***, JV400 Q3=10 R*** & JV400 Q3=16 R***. Models added October 2024 JV400e Q3=2,5 R*** JV400e Q3=2,5 Concentric R*** JV400e Q3=4 R*** JV400e Q3=6,3 R*** JV400e Q3=10 R*** JV400e Q3=16 R*** Where *** relates to Class of Accuracy of the water meter and can be replaced by: 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 4100, 500, 630, 800.

Approval Holder:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Manufacturer:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

13905XXX & 13915XXX - Flow arrow on body. ARAD logo, DN, product information and model range on label under the plastic lid. 139XXXXX - Flow arrow and size on body. ARAD logo, product information and model range on label under the plastic lid.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

OCTAVE range: 13905XXX (Composite Body, 2" BSP (M)) 13915XXX (Composite Body, 2.1/4" BSP (M)) 139XXXXX (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

‘Helvatron H2O’ range of ultrasonic water meters with brass bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Helvatron on cap. Helvatron and product info on meter face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

Helvatron H2O range: H2O DN15 (port lengths 115 & 165mm): ¾” BSP (M) inlet/outlet, H2O DN20 (port lengths 130, 190 & 195mm): 1” BSP (M) inlet/outlet, H2O DN25 (port lengths 225 & 260mm): 1¼” BSP (M) inlet/outlet, H2O DN32 (port lengths 230 & 260mm): 1½” BSP (M) inlet/outlet, H2O DN40 (port lengths 245 & 300mm): 2” BSP (M) inlet/outlet.

Approval Holder:

Helvatron AG

Company Name

Helvatron AG

Address

JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Range of concealed, wall mounted rough insets, incorporating cross-top and single lever operating members. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240504014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

THG stamped on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2029

Model:

40AC/W & 40AM/W

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose. Model (5840/MBG/W) is supplied with a single lever trim set. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240504017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

THG laser etched on wall mounted bracket

Installation Requirements:

R001 R070 R415

Expiry date:

31/05/2029

Model:

5840/9/W & 5840/MBG/W

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240504018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

THG etched on Body

Installation Requirements:

R001 R070 R415

Expiry date:

31/05/2029

Model:

G00-XXX-4270B/W. Where XXX denotes finishes and can be replaced by: A02-Polished Chrome, A13-Smoked Brass, B01-Polished Nickel, C01-Matte Nickel, C02-Matte Chrome, C27-Unlacquered Brass, C47-Smoked Nickel, D01-Light Bronze Lacquered, D05-Lacquered Matte Bronze, D10-USA Oil-Rubbed Bronze, D12-Polished Brass Lacquered, D15-Polished Black Lacquered, D16-White Lacquered, D18-Matte Black lacquered, D21-Old Oil-Rubbed Bronze, D24-Aranja, H17-Matt Aranja, F01-Polished Gold, F07-Matte Gold, F18-Rhodium Silver, F19-Matt Rhodium Silver, F27-Rose Gold, F30-Soft Gold, F31-Matte Soft Gold, F33-Brown Bronze PVD, F34-Matte Brown Bronze PVD, G01-Polished Nickel/Polished Gold, G02-Polished Chrome/Polished Gold, H03-Lacquered Antique Silver, H07-Varnished Matte Antique Red Copper, H08-Lacquered Matte Antique Silver, H24-Lacquered Antique Copper, H28-Antique Nickel, H49-Brass PVD, H50-Matte Brass PVD, H52-Gold PVD, H53-Matte Gold PVD, H55-Nickel PVD, H56-Matte Nickel PVD, H60-Matte Blush PVD, H62-Blush PVD, H64-Graphite PVD, H65-Matte Graphite PVD, H66-Umber PVD, H67-Matte Umber PVD

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Handset, incorporating chromium plated plastic body with a plastic aerator. Open outlet use only Maximum operating temperature 60.0°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240502708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Aerreplast logo on neck of thread

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

100012000

Approval Holder:

Aerre Plast Srl

Company Name

Aerre Plast Srl

Address

Via Novara, 8 Casale Corte Cerro (VB)

Postcode

28881

Country

Italy

Phone

+39 0323 865360

General Email

info@aerreplast.it

View All Listings by this Company

‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240504702

Note:

R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.

Size:

44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.

Installation Requirements:

R001 R007 R009 R415

Expiry date:

31/05/2029

Model:

46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of shower handsets and shower kits. Shower kits 2.1703.391, 2.1703.015 & 2.1703.016 incorporate a shower handset, shower hose and riser rail. Shower handset inlets incorporate a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240504003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½ BSP (M).

Marking:

Mira on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

1.1605.237 Mira Beat 110 Multi Mode Handset Chrome (Module No: 1740.065) 1.1605.238 Mira Beat 110 Multi Mode Handset White (Module No: 1740.066) 2.1703.009 Mira Beat 90 Single Mode White (Module No: 1703.452) 2.1703.011 Mira Beat 90 Single Mode Chrome (Module No: 1703.460) 2.1703.010 Mira Beat 90 Multi Mode White (Module No: 1703.251) 2.1703.012 Mira Beat 90 Multi Mode Chrome (Module No: 1703.250) 2.1703.015 Mira Beat 90 Fittings Kit White/Chrome 2.1703.016 Mira Beat 90 Fittings Kit Chrome 2.1703.391 Mira Beat 90 Bath Shower Fittings Kit (Chrome) 2.1831.003 Mira Beat 90 Eco Multi Mode Handset Chrome (Module No: 1831.001) Model added October 2023: 39178W-CP Mira Beat 90 Single Mode Chrome Model added November 2023: (39187W) Mira Beat 90 Fittings Kit Chrome Model added May 2024: 1329590 Mira Beat Multi Mode High Flow Handset (Chrome).

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower outlets with chrome plated brass bodies incorporating a single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Model 28450410 is a wall elbow for use with the shower sets and incorporates a check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature: 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240502026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Shower outlets: Dornbracht logo on centre of showerhead. Wall elbow: Dornbracht logo on backplate.

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

27803361, 27803371, 28002970, 28450410, 28450370.

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of shower outlets, (brass bodies - various finishes), incorporating ball joints, EPDM ‘O’-rings and NBR rubber seals. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240504019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F) ½” BSP (F) ¾” BSP (M) ½” BSP (M

Marking:

THG etched on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

186PR/W,286/W,288L/W,290/B/W,290/J/W,290/M/W,910PR/W & 3640/W Finishes: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with plastic bodies (various finishes) and brass shower arms (various finishes, incorporating EPDM O-rings and plastic flow regulators. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240608001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Products with ceiling connectors are to be installed with 24 010 180 basic set. 24 010 180 basic set is not approved in it's own right.

Size:

See models Products with ceiling connectors are to be installed with 24 010 180 basic set

Marking:

Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012). AXOR on shower plate (Models 35 274, 35 278 & 35 277).

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

24 002 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 002 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 003 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 003 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 012 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 24 013 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min - 1/2" BSP (M) 35 274 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 35 277 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector 35 278 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 24 010 180 - Hansgrohe | Rainmaker Select Basic Set - 1/2" BSP (F)

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower kits, comprising of (chrome plated or white) shower handsets that incorporate flow restrictors in the inlets, shower hoses and riser rail assemblies. The handsets can also be supplied separately (see models). Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240503003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Shower Kits – ½” BSP conical nut Handsets – ½” BSP (M)

Marking:

BRISTAN on the handset

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

Kits EV KIT-EEFB C EV KIT-EEFB C H EV KIT-EEVK C EV KIT-EFB C EVC KIT01 2M C EVC KIT01 C EVC KIT02 C EVF KIT03 C Handsets EVC HAND01 C EVC HAND02 C EVC HAND03 C EVC HAND04 C EVC HAND04 WC EVC HAND05 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower kits, comprising of (chrome or matte black) shower handsets, shower hoses and riser rail assemblies. The shower handsets incorporate plastic flow regulators. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240588002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

1/2" BSP conical nut.

Marking:

Handsets Methven Shower Hoses DTC15, WRAS, year of manufacture (YY)

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

EKIT09/KR EKIT09/KRBK

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of electronic pressure switches housed in a plastic body with a ceramic sensor and NBR gaskets and/or ‘O’-rings. The U480015 and U480016 models incorporate a spring-loaded plastic flow restrictor. Maximum working pressure 12.0 bar. Cold water only.

Section:

1720 Switches

Section Subtitle:

Pressure operated.

WRAS Approval Number:

240502058

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U480012/13/14/28: ¼" BSPP (F). U480015/16: 1" BSPP (M) X 1" BSPP (F) X 1" BSPP (F).

Marking:

Coelbo and product name on body. Coelbo, product name, serial number including date of manufacture (XX - YY/WWW VXX, where W13 would = week 13) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

U480012 - Switchmatic 1, U480013 - Switchmatic 2, U480014 - Switchmatic 3, U480028 - Switchmatic 2T, U480015 - T-Kit - Switchmatic 1, U480016 - T-Kit - Switchmatic 2.

Approval Holder:

COELBO CONTROL SYSTEM, S.L.

Company Name

COELBO CONTROL SYSTEM, S.L.

Address

Ctra. De Rubí, 288 Terrassa

Postcode

08228

Country

Spain

General Email

jcanizares@coelbo.es

View All Listings by this Company

Manufacturer:

COELBO CONTROL SYSTEM, S.L.

Company Name

COELBO CONTROL SYSTEM, S.L.

Address

Ctra. De Rubí, 288 Terrassa

Postcode

08228

Country

Spain

General Email

jcanizares@coelbo.es

View All Listings by this Company

Range of electronic pressure switches housed in a plastic body with a ceramic sensor and NBR gaskets and/or ‘O’-rings. The 1091203260 & G0912026 models incorporate a spring-loaded plastic flow restrictor. Maximum working pressure 12.0 bar. Cold water only.

Section:

1720 Switches

Section Subtitle:

Pressure operated.

WRAS Approval Number:

240502064

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

G01912025 GENYO PLUS 16/A RO.5-8 110-230 V 109120250 GENYO PLUS 16/A RO.5-8 110-230 V ¼" BSPP (F). 109120260 GENYO PLUS TKIT 16/A RO.5-8 LOWARA G09120260 GENYO PLUS TKIT 16/A RO.5-8 GWT 1" BSPP (M) X 1" BSPP (F) X 1" BSPP (F).

Marking:

Genyo and product name on body. Model type serial number including date of manufacture (XX - YY/WWW VXX, where W13 would = week 13) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

RANGE OF ELECTRONIC PRESSURE SWITCHES: G01912025 GENYO PLUS 16/A RO.5-8 110-230 V 109120250 GENYO PLUS 16/A RO.5-8 110-230 V 109120260 GENYO PLUS TKIT 16/A RO.5-8 LOWARA G09120260 GENYO PLUS TKIT 16/A RO.5-8 GWT

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator and is supplied with metal backnuts. Maximum working pressure 5 Bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240502002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Mira on body.

Installation Requirements:

R001 R006

Expiry date:

31/05/2029

Model:

2.1815.003 - Mira Honesty, 2.1817.003 - Mira Precision.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of bath pillar taps (chromium plated brass), incorporating quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic aerator and is supplied with metal backnuts. Maximum working pressure 10 Bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240502003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Mira on body.

Installation Requirements:

R001 R005

Expiry date:

31/05/2029

Model:

2.1819.003 - Mira Revive.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Basin pillar tap (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240502045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided TPSiV lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006

Expiry date:

31/05/2029

Model:

13 132 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of pillar taps (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straighteners. The products are supplied with metal backnuts. Models (VAL2 ½ E4 C CD & VAL2 ½ E6 C CD) are supplied with optional aerators that incorporate flow regulators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240903001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) ¾” BSP (M)

Marking:

BRISTAN on operating member

Installation Requirements:

R001 R006

Expiry date:

30/09/2029

Model:

VAL2 1/2 C CD VAL2 1/2 C 6 CD VAL2 3/4 C CD VAL2 1/2 E4 C CD VAL2 1/2 E6 C CD Models added February 2026: RP3 VAL2 1/2 C CD RP3 VAL2 3/4 C CD

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of pillar taps (brass bodies – various finishes) incorporating a quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240288012

Size:

½ “BSP (M) - 11605 Braye Basin ¾” BSP (M) - 52104 Braye Bath

Marking:

ebb & flo on body.

Installation Requirements:

R001 R005

Expiry date:

28/02/2029

Model:

11605 Braye Basin & 52104 Braye Bath Pillar Taps

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of pillar taps (brass bodies – various finishes) incorporating a quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar, Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240288013

Size:

½ “BSP (M).

Marking:

ebb & flo on body.

Installation Requirements:

R001 R006

Expiry date:

28/02/2029

Model:

31110 Lever Pillar Kitchen Taps

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of deck mounted, fixed or swivel (model 909101 only), self-closing basin pillar taps (chromium plated brass), incorporating a spring-loaded headwork controlling the flow with either dome type or lever operating members (see models). The outlets incorporate a plastic flow straightener or aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240502031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, EPDM lined flexible hose assemblies incorporating 1/2" BSP (F) captive nut end connections (Model 908001 only) or ½” BSP (M) (All other models)

Marking:

MCM logo and model code on rear of tap

Installation Requirements:

R001 R006

Expiry date:

31/05/2029

Model:

900000 (Dome Type) 900002 (Dome Type) 900100 (Dome Type) 900101 (Lever Type) 900104 (Dome Type) 900105 (Lever Type) 900200 (Dome Type) 900201 (Lever Type) 9001 (Dome Type) 9001A (Dome Type) 908000 (Dome Type) 908001 (Dome Type) 909100 (Dome Type) 909101 (Dome Type)

Approval Holder:

Rubinetterie MCM Intl. Srl.

Company Name

Rubinetterie MCM Intl. Srl.

Address

Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

Manufacturer:

Rubinetterie MCM Intl. Srl.

Company Name

Rubinetterie MCM Intl. Srl.

Address

Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

Range of wall mounted, fixed, self-closing basin pillar taps (chromium plated brass), incorporating a spring-loaded headwork controlling the flow with either dome type or lever operated operating members (see models). The outlets incorporate plastic flow straighteners. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240502032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

MCM logo and model code on rear of tap

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

900307 (Lever Type) 900301 (Dome Type) 900302 (Dome Type)

Approval Holder:

Rubinetterie MCM Intl. Srl.

Company Name

Rubinetterie MCM Intl. Srl.

Address

Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

Manufacturer:

Rubinetterie MCM Intl. Srl.

Company Name

Rubinetterie MCM Intl. Srl.

Address

Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604001

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Inta on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

NC230CP

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Manufacturer:

Idral S.p.A.

Company Name

Idral S.p.A.

Address

Via Isei, 8/10 - I-28010 Gargallo (NO)

Country

Italy

Phone

+39 0322 912017

General Email

View All Listings by this Company

Multi-layer PVC shower hoses with silver coating, brass end connections, EPDM gasket and NBR ‘O’-ring. Open outlet use only. Maximum operating temperature 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240502017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) x ½” BSP (F)

Marking:

Hualing logo, WRAS and year of manufacture YYYY on ferrule.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

FF1212-WRAS. Models added Feb 2026 FF1212-WRAS-CP FF1212-WRAS-BK FF1212-WRAS-GY FF1212-WRAS-GD FF1212-WRAS-RD FF1212-WRAS-WE FF1212-WRAS-BL

Approval Holder:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

View All Listings by this Company

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

View All Listings by this Company

Adaptor assembly consisting of a brass fitting with EPDM washer and PEX hose. Open outlet use only Maximum operating temperature 60°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240502050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below

Marking:

Wuxi Jinhua, date of manufacture (YYYY) WRAS on hose.

Installation Requirements:

R001 R008

Expiry date:

31/05/2029

Model:

GJS/E-BSW8788 - ½” BSP (F) GCUZ02K.005.0 – 7/16” UNS (F) Adaptor GCUZ02K.006.0 – ¾” BSP (F) Adaptor

Approval Holder:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Range of PE lined, nylon braided (black or grey) flexible hose assemblies. The hoses are available with a variety of end connections with different finishes (see model). Maximum operating temperature 85°C. Open outlet use only.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240502055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

H011R-160101A-NKL1: G1/2*M15x1. H01BR-110101A-BKL1: G1/2*Ø12.7mm. H01BR-110141A-BKL1: G1/2*Ø12.7mm. H01BR-110143A-BKL1: G1/2*Ø12.7mm. H01BR-110177A-BKL1: G1/2*Ø12.7mm. H01BR-160101A-NKL1: G1/2*Ø12.7mm. H01BR-160101A-NKL2: G1/2*Ø12.7mm. H01BR-160143A-NKL1: G1/2*Ø12.7mm. H01BR-160144A-NKL1: G1/2*Ø12.7mm. H01BR-160177A-NKL1: G1/2*Ø12.7mm. H01FF-110191C-NKL1: Ø12.7mm*Ø11.8mm. H01FP-110191C-NKL1: Ø11.8mm&Ø9.9mm. HBSKM-160101A-NKL1: G1/2*Ø12.7mm. HBSKM-160177A-NKL1: G1/2*Ø12.7mm. HENPC-176101S-NKL1: G1/2*M12X1. HENPC-176177S-NKL1: G1/2*M12X1. HENPC-176178S-NKL1: G1/2*M12X1. HENPC-1761E7S-NKL1: G1/2*M12X1. Where G1/2 = ½” BSP (F) conical nut.

Marking:

Jetom, year of manufacture (YYYY) and WRAS on the ferrule.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

DN8 bore, Ø13mm outer, length 1600mm, grey nylon braiding: H011R-160101A-NKL1 (chrome plated connector). H01BR-160101A-NKL1 (chrome plated connector). H01BR-160101A-NKL2 (chrome plated and brass connector). H01BR-160143A-NKL1 (VIBRANT FRENCH GOLD and brass connector). H01BR-160144A-NKL1 (ROSE GOLD and brass connector). H01BR-160177A-NKL1 (MATTE BLACK and brass connector). DN8 bore, Ø13mm outer, length 1100mm, grey nylon braiding: H01BR-110101A-BKL1 (chrome plated connector). H01BR-110141A-BKL1 (VIBRANT BRUSHED NICKEL and brass connector). H01BR-110143A-BKL1 (VIBRANT FRENCH GOLD and brass connector). H01BR-110177A-BKL1 (MATTE BLACK and brass connector). H01FF-110191C-NKL1 (brass connector). H01FP-110191C-NKL1 (brass connector). DN8 bore, Ø13mm outer, length 1650mm, black nylon braiding: HBSKM-160101A-NKL1 (chrome plated and brass connector). HBSKM-160177A-NKL1 (MATTE BLACK and brass connector). DN8 bore, Ø12mm outer, length 1780mm, grey nylon bariding: HENPC-176101S-NKL1 (chrome plated and brass connector). HENPC-176177S-NKL1 (MATTE BLACK and brass connector). HENPC-176178S-NKL1 (2 Moderne Brass and brass connector). HENPC-1761E7S-NKL1 (VIBRANT STAINLESS STEEL and brass connector).

Approval Holder:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Manufacturer:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hoses, incorporating EPDM gaskets. Some models incorporate an isolation valve. Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Hitik, WRAS and year of manufacture (YYYY) on crimped connection

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

H1E3D15F08 - 15mm x M10, DN10 H1E3D15F12 - 15mm x 3/4”, DN10 H1E3D15D15 - 15mm x 15mm, DN10 H1E3I15F08 - 15mm-Iso Valve x 1/2”, DN10 H1E3I15F12 - 15mm-Iso Valve x 3/4”, DN10 H1E3F08F08 - 1/2” x 1/2”, DN10 H1E3F08F12 - 1/2” x 3/4”, DN10 H1E3L08L08 - 1/2” x 1/2”, DN10 H1E4D15F08 - 15mm x 1/2”, DN13 H1E4D22F12 - 22mm x 3/4”, DN13 H1E4D22D22 - 22mm x 22mm, DN13 H1E4I22F12 - 22mm-Iso Valve x 3/4”, DN13 H1E2D15M30 - 15mm x M10, DN8 H1E2D15M36 - 15mm x M12, DN8

Approval Holder:

Yuhuan Hitik Plumbing Manufacturing

Company Name

Yuhuan Hitik Plumbing Manufacturing

Address

CaiSang Industry Park, Yuhuan, Zhejiang, China

View All Listings by this Company

Manufacturer:

Yuhuan Hitik Plumbing Manufacturing

Company Name

Yuhuan Hitik Plumbing Manufacturing

Address

CaiSang Industry Park, Yuhuan, Zhejiang, China

View All Listings by this Company

Range of Indirect and direct unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 90˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check cartridge, verified by test (suitable for backflow protection against fluid category 2) an expansion vessel and tundish. Maximum working pressure: Secondary: 4.0 Bar Primary: 3.0 Maximum operating temperature 99.0°C

Section:

1890 Unvented Heating Apparatus

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Secondary: 22mm compression Primary: 22mm compression

Marking:

Gledhill logo, model name, capacity, max pressure, date of manufacture (D/MM/YYYY) and other technical information on label on body.

Installation Requirements:

R001 R140 R360

Expiry date:

30/04/2029

Model:

Direct: SESINPDR090 SESINPDR120 SESINPDR150 SESINPDR170 SESINPDR200 SESINPDR250 SESINPDR300 Indirect: SESINPIN090 SESINPIN120 SESINPIN150 SESINPIN170 SESINPIN200 SESINPIN250 SESINPIN300

Approval Holder:

Gledhill Building Products Ltd

Company Name

Gledhill Building Products Ltd

Address

Sycamore Estate Blackpool

Postcode

FY4 3RL

Phone

(01253) 474439

View All Listings by this Company

Range of wall mounted, manually operated, blending valves, incorporating a ceramic cartridge headwork and single lever operating member with a self-cancelling diverter. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

240502012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Products are not supplied with a hose or handset. ibox 01 800 180 is not part of this approval.

Size:

Finish sets for insertion into Hansgrohe ibox 01 800 180 which has 3/4" BSP (F) inlets and outlets.

Marking:

AXOR logo on faceplate or Hansgrohe on operating member.

Installation Requirements:

R001 R030

Expiry date:

31/05/2029

Model:

10 416 xx0 AXOR Starck 34 425 xx0 AXOR Citterio M 39 455 xx0 AXOR Citterio 11 425 xx0 AXOR Urquiola 12 415 xx0 AXOR Starck Organic 71 745 xx0 Hansgrohe Talis E 72 405 xx0 Hansgrohe Talis S 71 405 xx0 Hansgrohe Logis 31 945 xx0 Hansgrohe Focus 31 493 xx0 Hansgrohe Metris 31 454 xx0 Hansgrohe Metris Models added June 2024: 32 545 xx0 Hansgrohe Metropol and 74 545 xx0 Hansgrohe Metropol. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted, concealed, manually operated blending valves (brass bodies) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure: 10 Bar. Maximum operating temperature: 65°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

241202001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

VOLA on operating member.

Installation Requirements:

R001 R010 R040

Expiry date:

31/12/2029

Model:

VOLA 2100X, VOLA 2300.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of wall mounted, bar shower mixers, (chrome plated brass bodies) incorporating a thermostatic cartridge controlling the temperature with either dome or cubed type operating members that incorporate manual override buttons and quarter turn ceramic disc headworks controlling the flow with dome or cubed type operating members. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure - 6 Bar. Maximum operating temperature - 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240502004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

These products are not supplied with shower hoses or handsets.

Size:

½” x ¾” offset unions

Marking:

Suerda on valve body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2029

Model:

SD4H08 SD4H09

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Range of wall mounted, concealed, thermostatic shower valves (brass bodied - chrome plated trim set), flow is controlled via a solenoid valve that is activated by an infrared sensor or touch sensor. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 8.0 Bar. Maximum operating temperature 65.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240502044

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Stern logo on handle

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2029

Model:

Infrared Sensor 612280 612281 Touch Sensor 612253 612254

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

T type thermostatic blending valve with a DZR brushed chrome brass body and inlets incorporate a stainless-steel strainer and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (BS EN 1057). Maximum working pressure: 10.0 Bar Maximum operating temperature 65.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240502718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm Compression

Marking:

XuSheng, flow arrow, H, C, Mix and CR on body.

Installation Requirements:

R001 R010 R040 R120

Expiry date:

31/05/2029

Model:

GDF-013.

Approval Holder:

Taizhou Xusheng Sanitary Ware Co. Ltd

Company Name

Taizhou Xusheng Sanitary Ware Co. Ltd

Address

No. 1, Lane 318, Binxiang Road, Sanjia Street, Taizhou City,Zhejiang Province,China Taizhou Bay New District, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Manufacturer:

Taizhou Xusheng Sanitary Ware Co. Ltd

Company Name

Taizhou Xusheng Sanitary Ware Co. Ltd

Address

No. 1, Lane 318, Binxiang Road, Sanjia Street, Taizhou City,Zhejiang Province,China Taizhou Bay New District, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies and polished stainless-steel trim/faceplates. Flow is controlled by a single sequential headwork with a single lever operating member. The inlets of the H96BOX each incorporates a isolation valve and a plastic strainer. The 9639SRV and 9632SRV models incorporate a plastic strainer and a plastic flow regulator on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240102064

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This approval does not include a shower hose and handset, or overhead shower outlet.

Size:

H9631 and H9631L models installed in conjunction with the H96BOX: ½” BSP (F). 9639SRV & 9632SRV models: ¾” BSP (M). Models added November 2024: ½” BSP (M)

Marking:

H9631 and H9631L models: Delabie on faceplate. H96BOX: Delabie on inside of box opening. 9639SRV and 9632SRV models: Delabie on operating member. Models added November 2024: Delabie on faceplate of H9631 and Delabie on inside of H96BOX

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2029

Model:

Recessed thermostatic sequential shower mixers: H9631, H9631L. Which must be installed in conjunction with: H96BOX recessed housing. Single control: 9639SRV, 9632SRV. Models added November 2024: H96CBOX H9633 H9633L

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Wall mounted thermostatic bar shower mixers (chrome plated brass body) incorporating a 2 way ceramic disc diverter headwork controlling the flow between the overhead shower and handset with either a dome or cube type operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with either a dome or cube type operating member. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.0 Bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240502027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” (M) x ½” (M) offset union

Marking:

JELS logo and WRAS on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2029

Model:

JL3133C-3146 (SK005) & JL3148C-3118 (SK006)

Approval Holder:

Ningbo Jieyi Sanitary Ware Co., Ltd.

Company Name

Ningbo Jieyi Sanitary Ware Co., Ltd.

Address

No.10 Yaobei Road, Simen Town, Yuyao, Ningbo

Country

China

View All Listings by this Company

Wall mounted, exposed, thermostatic bar type shower mixing valve (brass body, various finishes - see model). The product incorporates a 2-way ceramic disc diverter headwork with a single lever operating member controlling the flow to either shower outlet. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member and a manual override button. The product is supplied with a shower riser, overhead shower, shower hose and shower handset. The inlets incorporate a combined washer and stainless-steel strainer, as well as an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240588003

Size:

15mm compression.

Marking:

Ideal Standard on shower valve body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2029

Model:

BD579## Ceratherm Alu+ Thermostatic Shower System. Model added December 2025 BE202## Ceratherm Alu+ The suffix '##' denotes the finishes: RO (Rose) SI (Silver) XG (Matt Black) AA (Chrome) BR (Bronze)

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies for use with copper pipe (manufactured to BS EN 1057). The inlets of the PEG prefix models incorporate a check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). The inlets of the TX prefix models incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. UA & UAX suffix models incorporate isolation valves on each inlet, which includes a cold through connection on the UAX models. All inlets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240802001

Note:

IRN R010 applies to the TX prefix models.

Size:

See model.

Marking:

PEG prefix models: Pegler logo on body & cap. TX prefix models: Tectite on body & cap. All models: CR on body. UA & UAX suffix models also have CR on the inlet leg.

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2029

Model:

Compression models: PEG402 - 5A1401: 15mm, PEG402 - 5A1402: 22mm, PEG402UA - 5A1403: 15mm, PEG402UA - 5A1404: 22mm, PEG402UAX - 5A1405: 15mm, PEG402UAX - 5A1406: 22mm. Pushfit models: TX402 - 5A1560: 15mm, TX402 - 5A1561: 22mm, TX402UA - 5A1562: 15mm, TX402UA - 5A1563: 22mm, TX402UAX - 5A1564: 15mm, TX402UAX - 5A1565: 22mm.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company