Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

240602718

Size:

½” BSP (M)

Marking:

BAGNODESIGN and model name on cover, 6 litre line inside cistern

Installation Requirements:

R001 R280 R556 R581

Expiry date:

30/06/2029

Model:

BDS-B695-D13-ESG1 concealed WC flushing cistern

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of CAb backflow prevention devices with plastic bodies, incorporating EPDM seals and diaphragm. Filling link with manual or automatic tap. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C.

Section:

0018 Backflow Prevention Devices

Section Subtitle:

Schedule 2 - Section 6.2 Type CA - Non-Verifiable Disconnector With Difference Between Pressure Zones Not Greater Than 10%.

WRAS Approval Number:

250304706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(F) captive nut

Marking:

Orkli, Orkli Logo, model and product info on body.

Installation Requirements:

R001 R008 R511

Expiry date:

31/03/2030

Model:

Keyless Filling link 9E23001-00 9E23001-01 9E23001-02 9E23001-03 9E23001-04 Easy-Fill Permanent Filling link 9E49001-00 9E49001-02 9E49001-03 Orkli Standard Easy-Fill Permanent Filling link 9E00012-00 Easy-Fill Permanent Filling link - direct connection 9E00023-00 Orkli Standard Easy-Fill Permanent Filling link - direct connection 9E00020-00 Automatic Filling link 9E23002-00 Automatic Filling link 9E08002-00 9E08002-01

Product Images

Approval Holder:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

Manufacturer:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

Range of single hole, single outlet fixed (over the rim swivel nozzle) bidet combination tap assemblies stainless steel or brass bodies with various finishes, incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a swivel nozzle with a plastic aerator. The products are also supplied with a lever type pop-up waste. Maximum working pressure 3.0 Bar Maximum operating temperature 60.0°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

250402006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP (F) captive nut end connections.

Marking:

VOLA on Operating Member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2030

Model:

VOLA HV4-XX Model VOLA HV4-XX made in Brass or Stainless-steel material are available with the different surface finish. Suffix “XX” indicate the number of surface and denotes: For Brass Versions: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, B61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. For Stainless Steel Versions: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Brass body

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/05/2030

Notes & Further Information

The difference between models are the splines only, one has 20 and the other has 24.

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Range of ceramic disc headworks with brass bodies. The 12333004-001 model is a 2-way ceramic disc diverter headworks. The 12333006-001 model is ¼ turn. For insertion into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

250315006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12333004-001: Ø32.85mm, 12333006-001: Ø32.84mm.

Marking:

Hent, WRAS and production date (YYYYMMDD) on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

12333004-001, 12333006-001.

Approval Holder:

Guangdong Hent Technology Co., Ltd

Company Name

Guangdong Hent Technology Co., Ltd

Address

No. 28 Pingsha Dadao Pingsha Industrial Area, Zhishan Town Heshan City 529729 Guangdong

Country

China

View All Listings by this Company

Manufacturer:

Guangdong Hent Technology Co., Ltd

Company Name

Guangdong Hent Technology Co., Ltd

Address

No. 28 Pingsha Dadao Pingsha Industrial Area, Zhishan Town Heshan City 529729 Guangdong

Country

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Models 4E1022 & 4E1021 are supplied with a click type waste – not verified by test. Maximum working pressure; 5 Bar Maximum operating temperature; 60°c

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250302040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections

Marking:

Clever on body (4S1205) Instinct on operating member (4E1022, 4E1021)

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2030

Model:

4S1205 4E1022 4E1021

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

Range of single-hole, single outlet, (fixed) combination tap assemblies (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250102062

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Polymeric braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

SONAS on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2030

Model:

UBR0119 (in Chrome) UBR0120 (in Matt Black) UBR0121 (in Brushed Nickel) UBR0122 (in Brushed Gold) UBR0123 (in Chrome) UBR0124 (in Matt Black) UBR0125 (in Brushed Nickel) UBR0126 (in Brushed Gold) UBR0131 (in Chrome) UBR0140 (in Matt Black) UBR0141 (in Brushed Nickel) UBR0142 (in Brushed Gold) UBR0132 (in Chrome) UBR0143 (in Matt Black) UBR0144 (in Brushed Nickel) UBR0145 (in Brushed Gold) UBR0222 (in Chrome) UBR0223 (in Matt Black) UBR0224 (in Brushed Gold) UBR0225 (in Brushed Nickel) UBR0226 (in Chrome) UBR0227 (in Matt Black) UBR0228 (in Brushed Gold) UBR0229 (in Brushed Nickel)

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

General Email

2894475300@qq.com

View All Listings by this Company

Single outlet, single outlet (swivel) combination tap assembly (chromium plated brass body), incorporating quarter turn ceramic disc headworks with lever type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 Bar Maximum operating temperature 60.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250302045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 1/2" BSP (F) captive nut end connections

Marking:

INSTINCT on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2030

Model:

4E1120

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members (model 71 222 xx0 incorporates cross top operating members). The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250402007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

All models excluding 71 221 xx0 are supplied with lever type pop up wastes – not verified by test.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections.

Marking:

Hansgrohe logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2030

Model:

71 014 xx0 Hansgrohe MyCube 2-handle basin mixer 150 with lever type pop-up waste set 71 122 xx0 Hansgrohe MySport 2-handle basin mixer 150 with lever type pop-up waste set 71 221 xx0 Hansgrohe Logis 2-handle basin mixer without waste set 71 222 xx0 Hansgrohe Logis 2-handle basin mixer 150 with lever type pop-up waste set Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of two-hole, wall mounted, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250304019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

24.8 OD cartridge

Marking:

AXOR on handle

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2030

Model:

38 121 xx0 38 122 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

View All Listings by this Company

Deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure; 6 Bar Maximum operating temperature; 60°c

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250302042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)

Marking:

Instinct on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2030

Model:

4E1285

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates plastic aerators. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 70 °C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250102064

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

SONAS on Operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2030

Model:

UBR0127 (in Chrome) UBR0128 (in Matt Black) UBR0129 (in Brushed Nickel) UBR0130 (in Brushed Gold) UBR0230 (in Chrome) UBR0231 (in Matt Black) UBR0232 (in Brushed Gold) UBR0233 (in Brushed Nickel)

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

General Email

2894475300@qq.com

View All Listings by this Company

Range of three hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic aerator. The product incorporates stainless steel or nylon braided EPDM connection hoses. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250304018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

THG on Spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2030

Model:

25SG/W Notes: xxx.xxx.SG/W  SUPER GOLIATH SPOUT (First xxx = series, second xxx = finish) Finishes: A02-Polished Chrome ; A13-Smoked Brass ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; C27-Unlacquered Brass ; C47-Smoked Nickel ; D01-Light Bronze Lacquered ; D05-Lacquered Matte Bronze ; D10-USA Oil-Rubbed Bronze ; D12-Polished Brass Lacquered ; D15-Polished Black Lacquered ; D16-White Lacquered ; D18-Matte Black lacquered ; D21-Old Oil-Rubbed Bronze ; D24-Aranja ; H17-Matt Aranja ; F01-Polished Gold ; F07-Matte Gold ; F18-Rhodium Silver ; F19-Matt Rhodium Silver ; F27-Rose Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD ; G01-Polished Nickel/Polished Gold ; G02-Polished Chrome/Polished Gold ; H03-Lacquered Antique Silver ; H07-Varnished Matte Antique Red Copper ; H08-Lacquered Matte Antique Silver ; H24-Lacquered Antique Copper ; H28-Antique Nickel ; H49-Brass PVD ; H50-Matte Brass PVD ; H52-Gold PVD ; H53-Matte Gold PVD ; H55-Nickel PVD ; H56-Matte Nickel PVD ; H60-Matte Blush PVD ; H62-Blush PVD ; H64-Graphite PVD ; H65-Matte Graphite PVD ; H66-Umber PVD ; H67-Matte Umber PVD Styles : A41-Dahlia A7A-Ithaque décor Or A7B-Ithaque décor Platine A7F-Marquise décor Or A7G-Marquise blanc décor Platine A8L-Vogue marbre à définir A8M-Vogue Malachite A8N-Vogue Jaspe rouge A8R-Vogue Oeil de tigre A8S-Vogue Lapis Lazuli A9B-Jaipur Cristal satiné A9C-Jaipur Onyx noir A9E-Jaipur marbre à définir A9F-Jaipur Métal E53-Najem U1A-Mandarine Métal U1D-Mandarine Cristal clair U1K-Mandarine Cristallia Diamant U5A-Flore U5D-Sun Dragon U5H-Jade Dragon U5J-Rose U7A-Trocadéro Malachite XB4-Ritz - Picnic For explanation: A complete code number compile three information’s, for example: A7A-A02-25SG/W (SERIE-FINISH-ARTICLE). This would give you a Rim mounted 3-hole bath mixer, super goliath spout. in Ithaque décor Or style and polished chrome finish.

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

View All Listings by this Company

Range of deck mounted spout outlets, (brass bodies - various finishes) incorporating a plastic aerator. Open outlet use only. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

250304001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP (F) captive nut end connection.

Marking:

Villeroy & Boch logo on body

Installation Requirements:

R001 R006 R009

Expiry date:

31/03/2030

Model:

TVW106120151XX Famiglia Dawn TVW106120152XX Famiglia Dawn TVW106120153XX Famiglia Dawn TVT106510151XX Famiglia Dawn TVT106510152XX Famiglia Dawn TVT106510153XX Famiglia Dawn XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of filter heads with plastic bodies. Models with threaded connections incorporate a non-return valve (not suitable for backflow protection). Maximum working pressure 8.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

BWT and logo on top of filter head

Installation Requirements:

R001 R150 R170

Expiry date:

31/01/2030

Model:

812670 Grohe Blue Filterhead, 812533 Woda-Pure Filterhead, 812611 Blanco Filterhead & 125500636 MyAqua Filterhead: 3/8” BSP M. 812577 Grohe Blue® Home Filterhead: 8mm push fit.

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Manufacturer:

AIDU GmbH

Company Name

AIDU GmbH

Address

Walter-Simmer-Strasse 4, 5310 Mondsee

Country

Austria

General Email

View All Listings by this Company

Range of in-line water filters with plastic bodies. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

74.05mm Ø

Marking:

BWT logo and technical information on adhesive label on body.

Installation Requirements:

R001 R150 R170

Expiry date:

31/03/2030

Model:

125558001 BWT MyAQUA Pure. 125592519 Gessi AC Filter. 125504760 GROHE Blue Activated Carbon Mini Filter. 125558003 BWT MyAQUA Protect. 125592520 Gessi Soft Filter. 125558004 BWT MyAqua Perfect Taste.

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Range of stainless-steel (SS304 or SS316L) press fittings with EPDM ‘O’-rings for use with Dunshan stainless-steel (SS304 or SS316L) pipes. The DSU, DSMU and DSFU models also incorporate an EPDM gasket. Jointing is achieved via a crimping tool using a ‘M’ profile. For above ground and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250304010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 4” BSP (M) or (F). ½” - 2” captive nut.

Marking:

DS Press (Dunshan Press), material, WRAS logo and size etched on fittings and pipe.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Models ending with L = SS316L stainless steel, without L suffix = SS304 stainless steel. Equal Coupling: DSCP15L / DSCP15: 15mm, DSCP18L / DSCP18: 18mm, DSCP22L / DSCP22: 22mm, DSCP28L / DSCP28: 28mm, DSCP35L / DSCP35: 35mm, DSCP42L / DSCP42: 42mm, DSCP54L / DSCP54: 54mm, DSCP667L / DSCP667: 66.7mm, DSCP761L / DSCP761: 76.1mm, DSCP889L / DSCP889: 88.9mm, DSCP108L / DSCP108: 108mm. Reducer Coupling B: DSRCPB1815L / DSRCPB1815: 18×15mm, DSRCPB2215L / DSRCPB2215: 22×15mm, DSRCPB2218L / DSRCPB2218: 22×18mm, DSRCPB2815L / DSRCPB2815: 28×15mm, DSRCPB2818L / DSRCPB2818: 28×18mm, DSRCPB2822L / DSRCPB2822: 28×22mm, DSRCPB3515L / DSRCPB3515: 35×15mm, DSRCPB3518L / DSRCPB3518: 35×18mm, DSRCPB3522L / DSRCPB3522: 35×22mm, DSRCPB3528L / DSRCPB3528: 35×28mm, DSRCPB4215L / DSRCPB4215: 42×15mm, DSRCPB4218L / DSRCPB4218: 42×18mm, DSRCPB4222L / DSRCPB4222: 42×22mm, DSRCPB4228L / DSRCPB4228: 42×28mm, DSRCPB4235L / DSRCPB4235: 42×35mm, DSRCPB5415L / DSRCPB5415: 54×15mm, DSRCPB5418L / DSRCPB5418: 54×18mm, DSRCPB5422L / DSRCPB5422: 54×22mm, DSRCPB5428L / DSRCPB5428: 54×28mm, DSRCPB5435L / DSRCPB5435: 54×35mm, DSRCPB5442L / DSRCPB5442: 54×42mm, DSRCPB66715L / DSRCPB66715: 66.7×15mm, DSRCPB66718L / DSRCPB66718: 66.7×18mm, DSRCPB66722L / DSRCPB66722: 66.7×22mm, DSRCPB66728L / DSRCPB66728: 66.7×28mm, DSRCPB66735L / DSRCPB66735: 66.7×35mm, DSRCPB66742L / DSRCPB66742: 66.7×42mm, DSRCPB66754L / DSRCPB66754: 66.7×54mm, DSRCPB76115L / DSRCPB76115: 76.1×15mm, DSRCPB76118L / DSRCPB76118: 76.1×18mm, DSRCPB76122L / DSRCPB76122: 76.1×22mm, DSRCPB76128L / DSRCPB76128: 76.1×28mm, DSRCPB76135L / DSRCPB76135: 76.1×35mm, DSRCPB76142L / DSRCPB76142: 76.1×42mm, DSRCPB76154L / DSRCPB76154: 76.1×54mm, DSRCPB761667L / DSRCPB761667: 76.1×66.7mm, DSRCPB88915L / DSRCPB88915: 88.9×15mm, DSRCPB88918L / DSRCPB88918: 88.9×18mm, DSRCPB88922L / DSRCPB88922: 88.9×22mm, DSRCPB88928L / DSRCPB88928: 88.9×28mm, DSRCPB88935L / DSRCPB88935: 88.9×35mm, DSRCPB88942L / DSRCPB88942: 88.9×42mm, DSRCPB88954L / DSRCPB88954: 88.9×54mm, DSRCPB889667L / DSRCPB889667: 88.9×66.7mm, DSRCPB889761L / DSRCPB889761: 88.9×76.1mm, DSRCPB10815L / DSRCPB10815: 108×15mm, DSRCPB10818L / DSRCPB10818: 108×18mm, DSRCPB10822L / DSRCPB10822: 108×22mm, DSRCPB10828L / DSRCPB10828: 108×28mm, DSRCPB10835L / DSRCPB10835: 108×35mm, DSRCPB10842L / DSRCPB10842: 108×42mm, DSRCPB10854L / DSRCPB10854: 108×54mm, DSRCPB108667L / DSRCPB108667: 108×66.7mm, DSRCPB108761L / DSRCPB108761: 108×76.1mm, DSRCPB108889L / DSRCPB108889: 108×88.9mm. Reducer Coupling: DSRCP1815L / DSRCP1815: 18x15mm, DSRCP2215L / DSRCP2215: 22x15mm, DSRCP2218L / DSRCP2218: 22x18mm, DSRCP2815L / DSRCP2815: 28x15mm, DSRCP2818L / DSRCP2818: 28x18mm, DSRCP2822L / DSRCP2822: 28x22mm, DSRCP3515L / DSRCP3515: 35x15mm, DSRCP3518L / DSRCP3518: 35x18mm, DSRCP3522L / DSRCP3522: 35x22mm, DSRCP3528L / DSRCP3528: 35x28mm, DSRCP4215L / DSRCP4215: 42x15mm, DSRCP4218L / DSRCP4218: 42x18mm, DSRCP4222L / DSRCP4222: 42x22mm, DSRCP4228L / DSRCP4228: 42x28mm, DSRCP4235L / DSRCP4235: 42x35mm, DSRCP5415L / DSRCP5415: 54x15mm, DSRCP5418L / DSRCP5418: 54x18mm, DSRCP5422L / DSRCP5422: 54x22mm, DSRCP5428L / DSRCP5428: 54x28mm, DSRCP5435L / DSRCP5435: 54x35mm, DSRCP5442L / DSRCP5442: 54x42mm, DSRCP66715L / DSRCP66715: 66.7x15mm, DSRCP66718L / DSRCP66718: 66.7x18mm, DSRCP66722L / DSRCP66722: 66.7x22mm, DSRCP66728L / DSRCP66728: 66.7x28mm, DSRCP66735L / DSRCP66735: 66.7x35mm, DSRCP66742L / DSRCP66742: 66.7x42mm, DSRCP66754L / DSRCP66754: 66.7x54mm, DSRCP76115L / DSRCP76115: 76.1x15mm, DSRCP76118L / DSRCP76118: 76.1x18mm, DSRCP76122L / DSRCP76122: 76.1x22mm, DSRCP76128L / DSRCP76128: 76.1x28mm, DSRCP76135L / DSRCP76135: 76.1x35mm, DSRCP76142L / DSRCP76142: 76.1x42mm, DSRCP76154L / DSRCP76154: 76.1x54mm, DSRCP761667L / DSRCP761667: 76.1x66.7mm, DSRCP88915L / DSRCP88915: 88.9x15mm, DSRCP88918L / DSRCP88918: 88.9x18mm, DSRCP88922L / DSRCP88922: 88.9x22mm, DSRCP88928L / DSRCP88928: 88.9x28mm, DSRCP88935L / DSRCP88935: 88.9x35mm, DSRCP88942L / DSRCP88942: 88.9x42mm, DSRCP88954L / DSRCP88954: 88.9x54mm, DSRCP889667L / DSRCP889667: 88.9x66.7mm, DSRCP889761L / DSRCP889761: 88.9x76.1mm, DSRCP10815L / DSRCP10815: 108x15mm, DSRCP10818L / DSRCP10818: 108x18mm, DSRCP10822L / DSRCP10822: 108x22mm, DSRCP10828L / DSRCP10828: 108x28mm, DSRCP10835L / DSRCP10835: 108x35mm, DSRCP10842L / DSRCP10842: 108x42mm, DSRCP10854L / DSRCP10854: 108x54mm, DSRCP108667L / DSRCP108667: 108x66.7mm, DSRCP108761L / DSRCP108761: 108x76.1mm, DSRCP108889L / DSRCP108889: 108x88.9mm. Slip Coupling: DSSCP15L / DSSCP15: 15mm, DSSCP18L / DSSCP18: 18mm, DSSCP22L / DSSCP22: 22mm, DSSCP28L / DSSCP28: 28mm, DSSCP35L / DSSCP35: 35mm, DSSCP42L / DSSCP42: 42mm, DSSCP54L / DSSCP54: 54mm, DSSCP667L / DSSCP667: 66.7mm, DSSCP761L / DSSCP761: 76.1mm, DSSCP889L / DSSCP889: 88.9mm, DSSCP108L / DSSCP108: 108mm. Adapter with Female Threaded End: DSFAP1512L / DSFAP1512: 15×Rp1/2, DSFAP1534L / DSFAP1534: 15×Rp3/4, DSFAP1812L / DSFAP1812: 18×Rp1/2, DSFAP1834L / DSFAP1834: 18×Rp3/4, DSFAP2212L / DSFAP2212: 22×Rp1/2, DSFAP2234L / DSFAP2234: 22×Rp3/4, DSFAP221L / DSFAP221: 22×Rp1, DSFAP2812L / DSFAP2812: 28×Rp1/2, DSFAP2834L / DSFAP2834: 28×Rp3/4, DSFAP281L / DSFAP281: 28×Rp1, DSFAP28114L / DSFAP28114: 28×Rp1-1/4, DSFAP3512L / DSFAP3512: 35×Rp1/2, DSFAP3534L / DSFAP3534: 35×Rp3/4, DSFAP35114L / DSFAP35114: 35×Rp1-1/4, DSFAP351L / DSFAP351: 5×Rp1, DSFAP35112L / DSFAP35112: 35×Rp1-1/2, DSFAP4212L / DSFAP4212: 42×Rp1/2, DSFAP4234L / DSFAP4234: 42×Rp3/4, DSFAP421L / DSFAP421: 42×Rp1, DSFAP42114L / DSFAP42114: 42×Rp1-1/4, DSFAP42112L / DSFAP42112: 42×Rp1-1/2, DSFAP422L / DSFAP422: 42×Rp2, DSFAP5412L / DSFAP5412: 54×Rp1/2, DSFAP5434L / DSFAP5434: 54×Rp3/4, DSFAP541L / DSFAP541: 54×Rp1, DSFAP54114L / DSFAP54114: 54×Rp1-1/4, DSFAP54112L / DSFAP54112: 54×Rp1-1/2, DSFAP542L / DSFAP542: 54×Rp2, DSFAP66712L / DSFAP66712: 66.7xRp1/2, DSFAP66734L / DSFAP66734: 66.7xRp3/4, DSFAP6671L / DSFAP6671: 66.7xRp1, DSFAP667114L / DSFAP667114: 66.7xRp1-1/4, DSFAP667112L / DSFAP667112: 66.7xRp1-1/2, DSFAP6672L / DSFAP6672: 66.7xRp2, DSFAP667214L / DSFAP667214: 66.7xRp2-1/4, DSFAP667212L / DSFAP667212: 66.7xRp2-1/2, DSFAP76112L / DSFAP76112: 76.1xRp1/2, DSFAP76134L / DSFAP76134: 76.1xRp3/4, DSFAP7611L / DSFAP7611: 76.1xRp1, DSFAP76114L / DSFAP76114: 76.1xRp1-1/4, DSFAP76112L / DSFAP76112: 76.1xRp1-1/2, DSFAP7612L / DSFAP7612: 76.1xRp2, DSFAP761214L / DSFAP761214: 76.1xRp2-1/4, DSFAP761212L / DSFAP761212: 76.1xRp2-1/2, DSFAP88912L / DSFAP88912: 88.9xRp1/2, DSFAP88934L / DSFAP88934: 88.9xRp3/4, DSFAP8891L / DSFAP8891: 88.9xRp1, DSFAP889114L / DSFAP889114: 88.9xRp1-1/4, DSFAP889112L / DSFAP889112: 88.9xRp1-1/2, DSFAP8892L / DSFAP8892: 88.9xRp2, DSFAP889214L / DSFAP889214: 88.9xRp2-1/4, DSFAP889212L / DSFAP889212: 88.9xRp2-1/2, DSFAP8893L / DSFAP8893: 88.9xRp3, DSFAP10812L / DSFAP10812: 108xRp1/2, DSFAP10834L / DSFAP10834: 108xRp3/4, DSFAP1081L / DSFAP1081: 108xRp1, DSFAP108114L / DSFAP108114: 108xRp1-1/4, DSFAP108112L / DSFAP108112: 108xRp1-1/2, DSFAP1082L / DSFAP1082: 108xRp2, DSFAP108214L / DSFAP108214: 108xRp2-1/4, DSFAP108212L / DSFAP108212: 108xRp2-1/2, DSFAP1083L / DSFAP1083: 108xRp3, DSFAP1084L / DSFAP1084: 108xRp4. Adapter with Male Threaded End: DSMAP1512L / DSMAP1512: 15×R1/2, DSMAP1534L / DSMAP1534: 15×R3/4, DSMAP1812L / DSMAP1812: 18×R1/2, DSMAP1834L / DSMAP1834: 18×R3/4, DSMAP2212L / DSMAP2212: 22×R1/2, DSMAP2234L / DSMAP2234: 22×R3/4, DSMAP221L / DSMAP221: 22×R1, DSMAP2812L / DSMAP2812: 28×R1/2, DSMAP2834L / DSMAP2834: 28×R3/4, DSMAP281L / DSMAP281: 28×R1, DSMAP28114L / DSMAP28114: 28×R1-1/4, DSMAP3512L / DSMAP3512: 35×R1/2, DSMAP3534L / DSMAP3534: 35×R3/4, DSMAP35114L / DSMAP35114: 35×R1-1/4, DSMAP351L / DSMAP351: 35×R1, DSMAP35112L / DSMAP35112: 35×R1-1/2, DSMAP4212L / DSMAP4212: 42×R1/2, DSMAP4234L / DSMAP4234: 42×R3/4, DSMAP421L / DSMAP421: 42×R1, DSMAP42114L / DSMAP42114: 42×R1-1/4, DSMAP42112L / DSMAP42112: 42×R1-1/2, DSMAP422L / DSMAP422: 42×R2, DSMAP5412L / DSMAP5412: 54×R1/2, DSMAP5434L / DSMAP5434: 54×R3/4, DSMAP541L / DSMAP541: 54×R1, DSMAP54114L / DSMAP54114: 54×R1-1/4, DSMAP54112L / DSMAP54112: 54×R1-1/2, DSMAP542L / DSMAP542: 54×R2, DSMAP66712L / DSMAP66712: 66.7xR1/2, DSMAP66734L / DSMAP66734: 66.7xR3/4, DSMAP6671L / DSMAP6671: 66.7xR1, DSMAP667114L / DSMAP667114: 66.7xR1-1/4, DSMAP667112L / DSMAP667112: 66.7xR1-1/2, DSMAP6672L / DSMAP6672: 66.7xR2, DSMAP667214L / DSMAP667214: 66.7xR2-1/4, DSMAP667212L / DSMAP667212: 66.7xR2-1/2, DSMAP76112L / DSMAP76112: 76.1xR1/2, DSMAP76134L / DSMAP76134: 76.1xR3/4, DSMAP7611L / DSMAP7611: 76.1xR1, DSMAP761114L / DSMAP761114: 76.1xR1-1/4, DSMAP761112L / DSMAP761112: 76.1xR1-1/2, DSMAP7612L / DSMAP7612: 76.1xR2, DSMAP761214L / DSMAP761214: 76.1xR2-1/4, DSMAP761212L / DSMAP761212: 76.1xR2-1/2, DSMAP88912L / DSMAP88912: 88.9xR1/2, DSMAP88934L / DSMAP88934: 88.9xR3/4, DSMAP8891L / DSMAP8891: 88.9xR1, DSMAP889114L / DSMAP889114: 88.9xR1-1/4, DSMAP889112L / DSMAP889112: 88.9xR1-1/2, DSMAP8892L / DSMAP8892: 88.9xR2, DSMAP889214L / DSMAP889214: 88.9xR2-1/4, DSMAP889212L / DSMAP889212: 88.9xR2-1/2, DSMAP8893L / DSMAP8893: 88.9xR3, DSMAP10812L / DSMAP10812: 108xR1/2, DSMAP10834L / DSMAP10834: 108xR3/4, DSMAP1081L / DSMAP1081: 108xR1, DSMAP108114L / DSMAP108114: 108xR1-1/4, DSMAP108112L / DSMAP108112: 108xR1-1/2, DSMAP1082L / DSMAP1082: 108xR2, DSMAP108214L / DSMAP108214: 108xR2-1/4, DSMAP108212L / DSMAP108212: 108xR2-1/2, DSMAP1083L / DSMAP1083: 108xR3, DSMAP1084L / DSMAP1084: 108xR4. Adapter with Union Nut: DSU1512L / DSU1512: 15×G1/2, DSU1534L / DSU1534: 15×G3/4, DSU1812L / DSU1812: 18×G1/2, DSU1834L / DSU1834: 18×G3/4, DSU2212L / DSU2212: 22×G1/2, DSU2234L / DSU2234: 22×G3/4, DSU221L / DSU221: 22×G1, DSU2812L / DSU2812: 28×G1/2, DSU2834L / DSU2834: 28×G3/4, DSU281L / DSU281: 28×G1, DSU28114L / DSU28114: 28×G1-1/4, DSU3512L / DSU3512: 35×G1/2, DSU3534L / DSU3534: 35×G3/4, DSU35114L / DSU35114: 35×G1-1/4, DSU351L / DSU351: 35×G1, DSU35112L / DSU35112: 35×G1-1/2, DSU4212L / DSU4212: 42×G1/2, DSU4234L / DSU4234: 42×G3/4, DSU421L / DSU421: 42×G1, DSU42114L / DSU42114: 42×G1-1/4, DSU42112L / DSU42112: 42×G1-1/2, DSU422L / DSU422: 42×G2, DSU5412L / DSU5412: 54×G1/2, DSU5434L / DSU5434: 54×G3/4, DSU541L / DSU541: 54×G1, DSU54114L / DSU54114: 54×G1-1/4, DSU54112L / DSU54112: 54×G1-1/2, DSU542L / DSU542: 54×G2. Elbow 90°: DS90E15L / DS90E15: 15mm, DS90E18L / DS90E18: 18mm, DS90E22L / DS90E22: 22mm, DS90E28L / DS90E28: 28mm, DS90E35L / DS90E35: 35mm, DS90E42L / DS90E42: 42mm, DS90E54L / DS90E54: 54mm, DS90E667L / DS90E667: 66.7mm, DS90E761L / DS90E761: 76.1mm, DS90E889L / DS90E889: 88.9mm, DS90E108L / DS90E108: 108mm. Elbow 90 with Plain End: DS90EB15L / DS90EB15: 15mm, DS90EB18L / DS90EB18: 18mm, DS90EB22L / DS90EB22: 22mm, DS90EB28L / DS90EB28: 28mm, DS90EB35L / DS90EB35: 35mm, DS90EB42L / DS90EB42: 42mm, DS90EB54L / DS90EB54: 54mm, DS90EB667L / DS90EB667: 66.7mm, DS90EB761L / DS90EB761: 76.1mm, DS90EB889L / DS90EB889: 88.9mm, DS90EB108L / DS90EB108: 108mm. 90° Elbow: DS9015L / DS9015: 15mm, DS9018L / DS9018: 18mm, DS9022L / DS9022: 22mm, DS9028L / DS9028: 28mm, DS9035L / DS9035: 35mm, DS90420L / DS90420: 42mm, DS90541L / DS90541: 54mm, DS90667L / DS90667: 66.7mm, DS90761L / DS90761: 76.1mm, DS90889L / DS90889: 88.9mm, DS90108L / DS90108: 108mm. Elbow 45°: DS45E15L / DS45E15: 15mm, DS45E18L / DS45E18: 18mm, DS45E22L / DS45E22: 22mm, DS45E28L / DS45E28: 28mm, DS45E35L / DS45E35: 35mm, DS45E42L / DS45E42: 42mm, DS45E54L / DS45E54: 54mm, DS45E667L / DS45E667: 66.7mm, DS45E761L / DS45E761: 76.1mm, DS45E889L / DS45E889: 88.9mm, DS45E108L / DS45E108: 108mm. Elbow 45° with Plain End: DS45EB15L / DS45EB15: 15mm, DS45EB18L / DS45EB18: 18mm, DS45EB22L / DS45EB22: 22mm, DS45EB28L / DS45EB28: 28mm, DS45EB35L / DS45EB35: 35mm, DS45EB42L / DS45EB42: 42mm, DS45EB54L / DS45EB54: 54mm, DS45EB667L / DS45EB667: 66.7mm, DS45EB761L / DS45EB761: 76.1mm, DS45EB889L / DS45EB889: 88.9mm, DS45EB108L / DS45EB108: 108mm. 45° Elbow: DS4515L / DS4515: 15mm, DS4518L / DS4518: 18mm, DS4522L / DS4522: 22mm, DS4528L / DS4528: 28mm, DS4535L / DS4535: 35mm, DS4542L / DS4542: 42mm, DS4554L / DS4554: 54mm, DS45667L / DS45667: 66.7mm, DS45761L / DS45761: 76.1mm, DS45889L / DS45889: 88.9mm, DS45108L / DS45108: 108mm. 60° Elbow: DS6015L / DS6015: 15mm, DS6018L / DS6018: 18mm, DS6022L / DS6022: 22mm, DS6028L / DS6028: 28mm, DS6035L / DS6035: 35mm, DS6042L / DS6042: 42mm, DS6054L / DS6054: 54mm, DS60667L / DS60667: 66.7mm, DS60761L / DS60761: 76.1mm, DS60889L / DS60889: 88.9mm, DS60108L / DS60108: 108mm. 30° Elbow: DS3015L / DS3015: 15mm, DS3018L / DS3018: 18mm, DS3022L / DS3022: 22mm, DS3028L / DS3028: 28mm, DS3035L / DS3035: 35mm, DS3042L / DS3042: 42mm, DS3054L / DS3054: 54mm, DS30667L / DS30667: 66.7mm, DS30761L / DS30761: 76.1mm, DS30889L / DS30889: 88.9mm, DS30108L / DS30108: 108mm. 15° Elbow: DS1515L / DS1515: 15mm, DS1518L / DS1518: 18mm, DS1522L / DS1522: 22mm, DS1528L / DS1528: 28mm, DS1535L / DS1535: 35mm, DS1542L / DS1542: 42mm, DS1554L / DS1554: 54mm, DS15667L / DS15667: 66.7mm, DS15761L / DS15761: 76.1mm, DS15889L / DS15889: 88.9mm, DS15108L / DS15108: 108mm. Elbow 90 with Female Threaded End: DS90FE1512L / DS90FE1512: 15×Rp1/2, DS90FE1534L / DS90FE1534: 15×Rp3/4, DS90FE1812L / DS90FE1812: 18×Rp1/2, DS90FE1834L / DS90FE1834: 18×Rp3/4, DS90FE2212L / DS90FE2212: 22×Rp1/2, DS90FE2234L / DS90FE2234: 22×Rp3/4, DS90FE221L / DS90FE221: 22×Rp1, DS90FE2812L / DS90FE2812: 28×Rp1/2, DS90FE2834L / DS90FE2834: 28×Rp3/4, DS90FE281L / DS90FE281: 28×Rp1, DS90FE28114L / DS90FE28114: 28×Rp1-1/4, DS90FE3512L / DS90FE3512: 35×Rp1/2, DS90FE3534L / DS90FE3534: 35×Rp3/4, DS90FE35114L / DS90FE35114: 35×Rp1-1/4, DS90FE351L / DS90FE351: 35×Rp1, DS90FE35112L / DS90FE35112: 35×Rp1-1/2, DS90FE4212L / DS90FE4212: 42×Rp1/2, DS90FE4234L / DS90FE4234: 42×Rp3/4, DS90FE421L / DS90FE421: 42×Rp1, DS90FE42114L / DS90FE42114: 42×Rp1-1/4, DS90FE42112L / DS90FE42112: 42×Rp1-1/2, DS90FE422L / DS90FE422: 42×Rp2, DS90FE5412L / DS90FE5412: 54×Rp1/2, DS90FE5434L / DS90FE5434: 54×Rp3/4, DS90FE541L / DS90FE541: 54×Rp1, DS90FE54114L / DS90FE54114: 54×Rp1-1/4, DS90FE54112L / DS90FE54112: 54×Rp1-1/2, DS90FE542L / DS90FE542: 54×Rp2, DS90FE66712L / DS90FE66712: 66.7×Rp1/2, DS90FE66734L / DS90FE66734: 66.7×Rp3/4, DS90FE6671L / DS90FE6671: 66.7×Rp1, DS90FE667114L / DS90FE667114: 66.7×Rp1-1/4, DS90FE667112L / DS90FE667112: 66.7×Rp1-1/2, DS90FE6672L / DS90FE6672: 66.7×Rp2, DS90FE667214L / DS90FE667214: 66.7×Rp2-1/4, DS90FE667212L / DS90FE667212: 66.7×Rp2-1/2, DS90FE76112L / DS90FE76112: 76.1×Rp1/2, DS90FE76134L / DS90FE76134: 76.1×Rp3/4, DS90FE7611L / DS90FE7611: 76.1×Rp1, DS90FE761114L / DS90FE761114: 76.1×Rp1-1/4, DS90FE761112L / DS90FE761112: 76.1×Rp1-1/2, DS90FE7612L / DS90FE7612: 76.1×Rp2, DS90FE761214L / DS90FE761214: 76.1×Rp2-1/4, DS90FE761212L / DS90FE761212: 76.1×Rp2-1/2, DS90FE88912L / DS90FE88912: 88.9×Rp1/2, DS90FE88934L / DS90FE88934: 88.9×Rp3/4, DS90FE8891L / DS90FE8891: 88.9×Rp1, DS90FE889114L / DS90FE889114: 88.9×Rp1-1/4, DS90FE889112L / DS90FE889112: 88.9×Rp1-1/2, DS90FE8892L / DS90FE8892: 88.9×Rp2, DS90FE889214L / DS90FE889214: 88.9×Rp2-1/4, DS90FE889212L / DS90FE889212: 88.9×Rp2-1/2, DS90FE8893L / DS90FE8893: 88.9×Rp3, DS90FE10812L / DS90FE10812: 108×Rp1/2, DS90FE10834L / DS90FE10834: 108×Rp3/4, DS90FE1081L / DS90FE1081: 108×Rp1, DS90FE108114L / DS90FE108114: 108×Rp1-1/4, DS90FE108112L / DS90FE108112: 108×Rp1-1/2, DS90FE1082L / DS90FE1082: 108×Rp2, DS90FE108214L / DS90FE108214: 108×Rp2-1/4, DS90FE108212L / DS90FE108212: 108×Rp2-1/2, DS90FE1083L / DS90FE1083: 108×Rp3, DS90FE1084L / DS90FE1084: 108xRp4. Elbow 90 with Male Threaded End: DS90ME1512L / DS90ME1512: 15×R1/2, DS90ME1534L / DS90ME1534: 15×R3/4, DS90ME1812L / DS90ME1812: 18×R1/2, DS90ME1834L / DS90ME1834: 18×R3/4, DS90ME2212L / DS90ME2212: 22×R1/2, DS90ME2234L / DS90ME2234: 22×R3/4, DS90ME221L / DS90ME221: 22×R1, DS90ME2812L / DS90ME2812: 28×R1/2, DS90ME2834L / DS90ME2834: 28×R3/4, DS90ME281L / DS90ME281: 28×R1, DS90ME28114L / DS90ME28114: 28×R1-1/4, DS90ME3512L / DS90ME3512: 35×R1/2, DS90ME3534L / DS90ME3534: 35×R3/4, DS90ME35114L / DS90ME35114: 35×R1-1/4, DS90ME351L / DS90ME351: 35×R1, DS90ME35112L / DS90ME35112: 35×R1-1/2, DS90ME4212L / DS90ME4212: 42×R1/2, DS90ME4234L / DS90ME4234: 42×R3/4, DS90ME421L / DS90ME421: 42×R1, DS90ME42114L / DS90ME42114: 42×R1-1/4, DS90ME42112L / DS90ME42112: 42×R1-1/2, DS90ME422L / DS90ME422: 42×R2, DS90ME5412L / DS90ME5412: 54×R1/2, DS90ME5434L / DS90ME5434: 54×R3/4, DS90ME541L / DS90ME541: 54×R1, DS90ME54114L / DS90ME54114: 54×R1-1/4, DS90ME54112L / DS90ME54112: 54×R1-1/2, DS90ME542L / DS90ME542: 54×R2, DS90ME66712L / DS90ME66712: 66.7×R1/2, DS90ME66734L / DS90ME66734: 66.7×R3/4, DS90ME6671L / DS90ME6671: 66.7×R1, DS90ME667114L / DS90ME667114: 66.7×R1-1/4, DS90ME667112L / DS90ME667112: 66.7×R1-1/2, DS90ME6672L / DS90ME6672: 66.7×R2, DS90ME667214L / DS90ME667214: 66.7×R2-1/4, DS90ME667212L / DS90ME667212: 66.7×R2-1/2, DS90ME76112L / DS90ME76112: 76.1×R1/2, DS90ME76134L / DS90ME76134: 76.1×R3/4, DS90ME7611L / DS90ME7611: 76.1×R1, DS90ME761114L / DS90ME761114: 76.1×R1-1/4, DS90ME761112L / DS90ME761112: 76.1×R1-1/2, DS90ME7612L / DS90ME7612: 76.1×R2, DS90ME761214L / DS90ME761214: 76.1×R2-1/4, DS90ME761212L / DS90ME761212: 76.1×R2-1/2, DS90ME88912L / DS90ME88912: 88.9×R1/2, DS90ME88934L / DS90ME88934: 88.9×R3/4, DS90ME8891L / DS90ME8891: 88.9×R1, DS90ME889114L / DS90ME889114: 88.9×R1-1/4, DS90ME889112L / DS90ME889112: 88.9×R1-1/2, DS90ME8892L / DS90ME8892: 88.9×R2, DS90ME889214L / DS90ME889214: 88.9×R2-1/4, DS90ME889212L / DS90ME889212: 88.9×R2-1/2, DS90ME8893L / DS90ME8893: 88.9×R3, DS90ME10812L / DS90ME10812: 108×R1/2, DS90ME10834L / DS90ME10834: 108×R3/4, DS90ME1081L / DS90ME1081: 108×R1, DS90ME108114L / DS90ME108114: 108×R1-1/4, DS90ME108112L / DS90ME108112: 108×R1-1/2, DS90ME1082L / DS90ME1082: 108×R2, DS90ME108214L / DS90ME108214: 108×R2-1/4, DS90ME108212L / DS90ME108212: 108×R2-1/2, DS90ME1083L / DS90ME1083: 108×R3, DS90ME1084L / DS90ME1084: 108xR4. Short male elbow: DSS90ME1512L / DSS90ME1512: 15×R1/2, DSS90ME1534L / DSS90ME1534: 15×R3/4, DSS90ME1812L / DSS90ME1812: 18×R1/2, DSS90ME1834L / DSS90ME1834: 18×R3/4, DSS90ME2212L / DSS90ME2212: 22×R1/2, DSS90ME2234L / DSS90ME2234: 22×R3/4, DSS90ME221L / DSS90ME221: 22×R1, DSS90ME2812L / DSS90ME2812: 28×R1/2, DSS90ME2834L / DSS90ME2834: 28×R3/4, DSS90ME281L / DSS90ME281: 28×R1, DSS90ME28114L / DSS90ME28114: 28×R1-1/4, DSS90ME3512L / DSS90ME3512: 35×R1/2, DSS90ME3534L / DSS90ME3534: 35×R3/4, DSS90ME35114L / DSS90ME35114: 35×R1-1/4, DSS90ME351L / DSS90ME351: 35×R1, DSS90ME35112L / DSS90ME35112: 35×R1-1/2, DSS90ME4212L / DSS90ME4212: 42×R1/2, DSS90ME4234L / DSS90ME4234: 42×R3/4, DSS90ME421L / DSS90ME421: 42×R1, DSS90ME42114L / DSS90ME42114: 42×R1-1/4, DSS90ME42112L / DSS90ME42112: 42×R1-1/2, DSS90ME422L / DSS90ME422: 42×R2, DSS90ME5412L / DSS90ME5412: 54×R1/2, DSS90ME5434L / DSS90ME5434: 54×R3/4, DSS90ME541L / DSS90ME541: 54×R1, DSS90ME54114L / DSS90ME54114: 54×R1-1/4, DSS90ME54112L / DSS90ME54112: 54×R1-1/2, DSS90ME542L / DSS90ME542: 54×R2, DSS90ME66712L / DSS90ME66712: 66.7×R1/2, DSS90ME66734L / DSS90ME66734: 66.7×R3/4, DSS90ME6671L / DSS90ME6671: 66.7×R1, DSS90ME667114L / DSS90ME667114: 66.7×R1-1/4, DSS90ME667112L / DSS90ME667112: 66.7×R1-1/2, DSS90ME6672L / DSS90ME6672: 66.7×R2, DSS90ME667214L / DSS90ME667214: 66.7×R2-1/4, DSS90ME667212L / DSS90ME667212: 66.7×R2-1/2, DSS90ME76112L / DSS90ME76112: 76.1×R1/2, DSS90ME76134L / DSS90ME76134: 76.1×R3/4, DSS90ME7611L / DSS90ME7611: 76.1×R1, DSS90ME761114L / DSS90ME761114: 76.1×R1-1/4, DSS90ME761112L / DSS90ME761112: 76.1×R1-1/2, DSS90ME7612L / DSS90ME7612: 76.1×R2, DSS90ME761214L / DSS90ME761214: 76.1×R2-1/4, DSS90ME761212L / DSS90ME761212: 76.1×R2-1/2, DSS90ME88912L / DSS90ME88912: 88.9×R1/2, DSS90ME88934L / DSS90ME88934: 88.9×R3/4, DSS90ME8891L / DSS90ME8891: 88.9×R1, DSS90ME889114L / DSS90ME889114: 88.9×R1-1/4, DSS90ME889112L / DSS90ME889112: 88.9×R1-1/2, DSS90ME8892L / DSS90ME8892: 88.9×R2, DSS90ME889214L / DSS90ME889214: 88.9×R2-1/4, DSS90ME889212L / DSS90ME889212: 88.9×R2-1/2, DSS90ME8893L / DSS90ME8893: 88.9×R3, DSS90ME10812L / DSS90ME10812: 108×R1/2, DSS90ME10834L / DSS90ME10834: 108×R3/4, DSS90ME1081L / DSS90ME1081: 108×R1, DSS90ME108114L / DSS90ME108114: 108×R1-1/4, DSS90ME108112L / DSS90ME108112: 108×R1-1/2, DSS90ME1082L / DSS90ME1082: 108×R2, DSS90ME108214L / DSS90ME108214: 108×R2-1/4, DSS90ME108212L / DSS90ME108212: 108×R2-1/2, DSS90ME1083L / DSS90ME1083: 108×R3, DSS90ME1084L / DSS90ME1084: 108xR4. Short female elbow: DSS90FE1512L / DSS90FE1512: 15×Rp1/2, DSS90FE1534L / DSS90FE1534: 15×Rp3/4, DSS90FE1812L / DSS90FE1812: 18×Rp1/2, DSS90FE1834L / DSS90FE1834: 18×Rp3/4, DSS90FE2212L / DSS90FE2212: 22×Rp1/2, DSS90FE2234L / DSS90FE2234: 22×Rp3/4, DSS90FE221L / DSS90FE221: 22×Rp1, DSS90FE2812L / DSS90FE2812: 28×Rp1/2, DSS90FE2834L / DSS90FE2834: 28×Rp3/4, DSS90FE281L / DSS90FE281: 28×Rp1, DSS90FE28114L / DSS90FE28114: 28×Rp1-1/4, DSS90FE3512L / DSS90FE3512: 35×Rp1/2, DSS90FE3534L / DSS90FE3534: 35×Rp3/4, DSS90FE35114L / DSS90FE35114: 35×Rp1-1/4, DSS90FE351L / DSS90FE351: 35×Rp1, DSS90FE35112L / DSS90FE35112: 35×Rp1-1/2, DSS90FE4212L / DSS90FE4212: 42×Rp1/2, DSS90FE4234L / DSS90FE4234: 42×Rp3/4, DSS90FE421L / DSS90FE421: 42×Rp1, DSS90FE42114L / DSS90FE42114: 42×Rp1-1/4, DSS90FE42112L / DSS90FE42112: 42×Rp1-1/2, DSS90FE422L / DSS90FE422: 42×Rp2, DSS90FE5412L / DSS90FE5412: 54×Rp1/2, DSS90FE5434L / DSS90FE5434: 54×Rp3/4, DSS90FE541L / DSS90FE541: 54×Rp1, DSS90FE54114L / DSS90FE54114: 54×Rp1-1/4, DSS90FE54112L / DSS90FE54112: 54×Rp1-1/2, DSS90FE542L / DSS90FE542: 54×Rp2. Elbow 90 with Female Threaded End with Wall Plate: DS90WPE1512L / DS90WPE1512: 15×Rp1/2, DS90WPE1534L / DS90WPE1534: 15×Rp3/4, DS90WPE1812L / DS90WPE1812: 18×Rp1/2, DS90WPE1834L / DS90WPE1834: 18×Rp3/4, DS90WPE2212L / DS90WPE2212: 22×Rp1/2, DS90WPE2234L / DS90WPE2234: 22×Rp3/4, DS90WPE221L / DS90WPE221: 22×Rp1, DS90WPE2812L / DS90WPE2812: 28×Rp1/2, DS90WPE2834L / DS90WPE2834: 28×Rp3/4, DS90WPE281L / DS90WPE281: 28×Rp1, DS90WPE28114L / DS90WPE28114: 28×Rp1-1/4, DS90WPE3512L / DS90WPE3512: 35×Rp1/2, DS90WPE3534L / DS90WPE3534: 35×Rp3/4, DS90WPE35114L / DS90WPE35114: 35×Rp1-1/4, DS90WPE351L / DS90WPE351: 35×Rp1, DS90WPE35112L / DS90WPE35112: 35×Rp1-1/2, DS90WPE4212L / DS90WPE4212: 42×Rp1/2, DS90WPE4234L / DS90WPE4234: 42×Rp3/4, DS90WPE421L / DS90WPE421: 42×Rp1, DS90WPE42114L / DS90WPE42114: 42×Rp1-1/4, DS90WPE42112L / DS90WPE42112: 42×Rp1-1/2, DS90WPE422L / DS90WPE422: 42×Rp2, DS90WPE5412L / DS90WPE5412: 54×Rp1/2, DS90WPE5434L / DS90WPE5434: 54×Rp3/4, DS90WPE541L / DS90WPE541: 54×Rp1, DS90WPE54114L / DS90WPE54114: 54×Rp1-1/4, DS90WPE54112L / DS90WPE54112: 54×Rp1-1/2, DS90WPE542L / DS90WPE542: 54×Rp2. Equal Tee: DST15L / DST15: 15mm, DST18L / DST18: 18mm, DST22L / DST22: 22mm, DST28L / DST28: 28mm, DST35L / DST35: 35mm, DST42L / DST42: 42mm, DST54L / DST54: 54mm, DST667L / DST667: 66.7mm, DST761L / DST761: 76.1mm, DST889L / DST889: 88.9mm, DST108L / DST108: 108mm. Reducer Tee: DSRT1815L / DSRT1815: 18×15mm, DSRT2215L / DSRT2215: 22×15mm, DSRT2218L / DSRT2218: 22×18mm, DSRT2815L / DSRT2815: 28×15mm, DSRT2818L / DSRT2818: 28×18mm, DSRT2822L / DSRT2822: 28×22mm, DSRT3515L / DSRT3515: 35×15mm, DSRT3518L / DSRT3518: 35×18mm, DSRT3522L / DSRT3522: 35×22mm, DSRT3528L / DSRT3528: 35×28mm, DSRT4215L / DSRT4215: 42×15mm, DSRT4218L / DSRT4218: 42×18mm, DSRT4222L / DSRT4222: 42×22mm, DSRT4228L / DSRT4228: 42×28mm, DSRT4235L / DSRT4235: 42×35mm, DSRT5415L / DSRT5415: 54×15mm, DSRT5418L / DSRT5418: 54×18mm, DSRT5422L / DSRT5422: 54×22mm, DSRT5428L / DSRT5428: 54×28mm, DSRT5435L / DSRT5435: 54×35mm, DSRT5442L / DSRT5442: 54×42mm, DSRT66715L / DSRT66715: 66.7×15mm, DSRT66718L / DSRT66718: 66.7×18mm, DSRT66722L / DSRT66722: 66.7×22mm, DSRT66728L / DSRT66728: 66.7×28mm, DSRT66735L / DSRT66735: 66.7×35mm, DSRT66742L / DSRT66742: 66.7×42mm, DSRT66754L / DSRT66754: 66.7×54mm, DSRT76115L / DSRT76115: 76.1×15mm, DSRT76118L / DSRT76118: 76.1×18mm, DSRT76122L / DSRT76122: 76.1×22mm, DSRT76128L / DSRT76128: 76.1×28mm, DSRT76135L / DSRT76135: 76.1×35mm, DSRT76142L / DSRT76142: 76.1×42mm, DSRT76154L / DSRT76154: 76.1×54mm, DSRT761667L / DSRT761667: 76.1×66.7mm, DSRT88915L / DSRT88915: 88.9×15mm, DSRT88918L / DSRT88918: 88.9×18mm, DSRT88922L / DSRT88922: 88.9×22mm, DSRT88928L / DSRT88928: 88.9×28mm, DSRT88935L / DSRT88935: 88.9×35mm, DSRT88942L / DSRT88942: 88.9×42mm, DSRT88954L / DSRT88954: 88.9×54mm, DSRT889667L / DSRT889667: 88.9×66.7mm, DSRT889761L / DSRT889761: 88.9×76.1mm, DSRT10815L / DSRT10815: 108×15mm, DSRT10818L / DSRT10818: 108×18mm, DSRT10822L / DSRT10822: 108×22mm, DSRT10828L / DSRT10828: 108×28mm, DSRT10835L / DSRT10835: 108×35mm, DSRT10842L / DSRT10842: 108×42mm, DSRT10854L / DSRT10854: 108×54mm, DSRT108667L / DSRT108667: 108×66.7mm, DSRT108761L / DSRT108761: 108×76.1mm, DSRT108889L / DSRT108889: 108×88.9mm. Tee with Female Threaded Branch: DSFT1512L / DSFT1512: 15×Rp1/2, DSFT1534L / DSFT1534: 15×Rp3/4, DSFT1812L / DSFT1812: 18×Rp1/2, DSFT1834L / DSFT1834: 18×Rp3/4, DSFT2212L / DSFT2212: 22×Rp1/2, DSFT2234L / DSFT2234: 22×Rp3/4, DSFT221L / DSFT221: 22×Rp1, DSFT2812L / DSFT2812: 28×Rp1/2, DSFT2834L / DSFT2834: 28×Rp3/4, DSFT281L / DSFT281: 28×Rp1, DSFT28114L / DSFT28114: 28×Rp1-1/4, DSFT3512L / DSFT3512: 35×Rp1/2, DSFT3534L / DSFT3534: 35×Rp3/4, DSFT35114L / DSFT35114: 35×Rp1-1/4, DSFT351L / DSFT351: 35×Rp1, DSFT35112L / DSFT35112: 35×Rp1-1/2, DSFT4212L / DSFT4212: 42×Rp1/2, DSFT4234L / DSFT4234: 42×Rp3/4, DSFT421L / DSFT421: 42×Rp1, DSFT42114L / DSFT42114: 42×Rp1-1/4, DSFT42112L / DSFT42112: 42×Rp1-1/2, DSFT422L / DSFT422: 42×Rp2, DSFT5412L / DSFT5412: 54×Rp1/2, DSFT5434L / DSFT5434: 54×Rp3/4, DSFT541L / DSFT541: 54×Rp1, DSFT54114L / DSFT54114: 54×Rp1-1/4, DSFT54112L / DSFT54112: 54×Rp1-1/2, DSFT542L / DSFT542: 54×Rp2, DSFT66712L / DSFT66712: 66.7×Rp1/2, DSFT66734L / DSFT66734: 66.7×Rp3/4, DSFT6671L / DSFT6671: 66.7×Rp1, DSFT667114L / DSFT667114: 66.7×Rp1-1/4, DSFT667112L / DSFT667112: 66.7×Rp1-1/2, DSFT6672L / DSFT6672: 66.7×Rp2, DSFT667214L / DSFT667214: 66.7×Rp2-1/4, DSFT667212L / DSFT667212: 66.7×Rp2-1/2, DSFT76112L / DSFT76112: 76.1×Rp1/2, DSFT76134L / DSFT76134: 76.1×Rp3/4, DSFT7611L / DSFT7611: 76.1×Rp1, DSFT761114L / DSFT761114: 76.1×Rp1-1/4, DSFT761112L / DSFT761112: 76.1×Rp1-1/2, DSFT7612L / DSFT7612: 76.1×Rp2, DSFT761214L / DSFT761214: 76.1×Rp2-1/4, DSFT761212L / DSFT761212: 76.1×Rp2-1/2, DSFT88912L / DSFT88912: 88.9×Rp1/2, DSFT88934L / DSFT88934: 88.9×Rp3/4, DSFT8891L / DSFT8891: 88.9×Rp1, DSFT889114L / DSFT889114: 88.9×Rp1-1/4, DSFT889112L / DSFT889112: 88.9×Rp1-1/2, DSFT8892L / DSFT8892: 88.9×Rp2, DSFT889214L / DSFT889214: 88.9×Rp2-1/4, DSFT889212L / DSFT889212: 88.9×Rp2-1/2, DSFT8893L / DSFT8893: 88.9×Rp3, DSFT10812L / DSFT10812: 108×Rp1/2, DSFT10834L / DSFT10834: 108×Rp3/4, DSFT1081L / DSFT1081: 108×Rp1, DSFT108114L / DSFT108114: 108×Rp1-1/4, DSFT108112L / DSFT108112: 108×Rp1-1/2, DSFT1082L / DSFT1082: 108×Rp2, DSFT108214L / DSFT108214: 108×Rp2-1/4, DSFT108212L / DSFT108212: 108×Rp2-1/2, DSFT1083L / DSFT1083: 108×Rp3, DSFT1084L / DSFT1084: 108xRp4. Tee with Male Threaded Branch: DSMT1512L / DSMT1512: 15×R1/2, DSMT1534L / DSMT1534: 15×R3/4, DSMT1812L / DSMT1812: 18×R1/2, DSMT1834L / DSMT1834: 18×R3/4, DSMT2212L / DSMT2212: 22×R1/2, DSMT2234L / DSMT2234: 22×R3/4, DSMT221L / DSMT221: 22×R1, DSMT2812L / DSMT2812: 28×R1/2, DSMT2834L / DSMT2834: 28×R3/4, DSMT281L / DSMT281: 28×R1, DSMT28114L / DSMT28114: 28×R1-1/4, DSMT3512L / DSMT3512: 35×R1/2, DSMT3534L / DSMT3534: 35×R3/4, DSMT35114L / DSMT35114: 35×R1-1/4, DSMT351L / DSMT351: 35×R1, DSMT35112L / DSMT35112: 35×R1-1/2, DSMT4212L / DSMT4212: 42×R1/2, DSMT4234L / DSMT4234: 42×R3/4, DSMT421L / DSMT421: 42×R1, DSMT42114L / DSMT42114: 42×R1-1/4, DSMT42112L / DSMT42112: 42×R1-1/2, DSMT422L / DSMT422: 42×R2, DSMT5412L / DSMT5412: 54×R1/2, DSMT5434L / DSMT5434: 54×R3/4, DSMT541L / DSMT541: 54×R1, DSMT54114L / DSMT54114: 54×R1-1/4, DSMT54112L / DSMT54112: 54×R1-1/2, DSMT542L / DSMT542: 54×R2, DSMT66712L / DSMT66712: 66.7×R1/2, DSMT66734L / DSMT66734: 66.7×R3/4, DSMT6671L / DSMT6671: 66.7×R1, DSMT667114L / DSMT667114: 66.7×R1-1/4, DSMT667112L / DSMT667112: 66.7×R1-1/2, DSMT6672L / DSMT6672: 66.7×R2, DSMT667214L / DSMT667214: 66.7×R2-1/4, DSMT667212L / DSMT667212: 66.7×R2-1/2, DSMT76112L / DSMT76112: 76.1×R1/2, DSMT76134L / DSMT76134: 76.1×R3/4, DSMT7611L / DSMT7611: 76.1×R1, DSMT761114L / DSMT761114: 76.1×R1-1/4, DSMT761112L / DSMT761112: 76.1×R1-1/2, DSMT7612L / DSMT7612: 76.1×R2, DSMT761214L / DSMT761214: 76.1×R2-1/4, DSMT761212L / DSMT761212: 76.1×R2-1/2, DSMT88912L / DSMT88912: 88.9×R1/2, DSMT88934L / DSMT88934: 88.9×R3/4, DSMT8891L / DSMT8891: 88.9×R1, DSMT889114L / DSMT889114: 88.9×R1-1/4, DSMT889112L / DSMT889112: 88.9×R1-1/2, DSMT8892L / DSMT8892: 88.9×R2, DSMT889214L / DSMT889214: 88.9×R2-1/4, DSMT889212L / DSMT889212: 88.9×R2-1/2, DSMT8893L / DSMT8893: 88.9×R3, DSMT10812L / DSMT10812: 108×R1/2, DSMT10834L / DSMT10834: 108×R3/4, DSMT1081L / DSMT1081: 108×R1, DSMT108114L / DSMT108114: 108×R1-1/4, DSMT108112L / DSMT108112: 108×R1-1/2, DSMT1082L / DSMT1082: 108×R2, DSMT108214L / DSMT108214: 108×R2-1/4, DSMT108212L / DSMT108212: 108×R2-1/2, DSMT1083L / DSMT1083: 108×R3, DSMT1084L / DSMT1084: 108xR4. Cap: DSCAP15L / DSCAP15: 15mm, DSCAP18L / DSCAP18: 18mm, DSCAP22L / DSCAP22: 22mm, DSCAP28L / DSCAP28: 28mm, DSCAP35L / DSCAP35: 35mm, DSCAP42L / DSCAP42: 42mm, DSCAP54L / DSCAP54: 54mm, DSCAP667L / DSCAP667: 66.7mm, DSCAP761L / DSCAP761: 76.1mm, DSCAP889L / DSCAP889: 88.9mm, DSCAP108L / DSCAP108: 108mm. Pipe Bridge: DSBG15L / DSBG15: 15mm, DSBG18L / DSBG18: 18mm, DSBG22L / DSBG22: 22mm, DSBG28L / DSBG28: 28mm, DSBG35L / DSBG35: 35mm, DSBG42L / DSBG42: 42mm, DSBG54L / DSBG54: 54mm, DSBG667L / DSBG667: 66.7mm, DSBG761L / DSBG761: 76.1mm, DSBG889L / DSBG889: 88.9mm, DSBG108L / DSBG108: 108mm. Press Pipe Bridge: DSBRG15L / DSBRG15: 15mm, DSBRG18L / DSBRG18: 18mm, DSBRG22L / DSBRG22: 22mm, DSBRG28L / DSBRG28: 28mm, DSBRG35L / DSBRG35: 35mm, DSBRG42L / DSBRG42: 42mm, DSBRG54L / DSBRG54: 54mm, DSBRG667L / DSBRG667: 66.7mm, DSBRG761L / DSBRG761: 76.1mm, DSBRG889L / DSBRG889: 88.9mm, DSBRG108L / DSBRG108: 108mm. Flange Adapter: DSFA15L / DSFA15: 15mm, DSFA18L / DSFA18: 18mm, DSFA22L / DSFA22: 22mm, DSFA28L / DSFA28: 28mm, DSFA35L / DSFA35: 35mm, DSFA42L / DSFA42: 42mm, DSFA54L / DSFA54: 54mm, DSFA667L / DSFA667: 66.7mm, DSFA761: 76.1mm, DSFA889: 88.9mm, / DSFA108: 108mm. Male Straight Connector with Union Nut: DSMU1512L / DSMU1512: 15×R1/2, DSMU1534L / DSMU1534: 15×R3/4, DSMU1812L / DSMU1812: 18×R1/2, DSMU1834L / DSMU1834: 18×R3/4, DSMU2212L / DSMU2212: 22×R1/2, DSMU2234L / DSMU2234: 22×R3/4, DSMU221L / DSMU221: 22×R1, DSMU2812L / DSMU2812: 28×R1/2, DSMU2834L / DSMU2834: 28×R3/4, DSMU281L / DSMU281: 28×R1, DSMU28114L / DSMU28114: 28×R1-1/4, DSMU3512L / DSMU3512: 35×R1/2, DSMU3534L / DSMU3534: 35×R3/4, DSMU35114L / DSMU35114: 35×R1-1/4, DSMU351L / DSMU351: 35×R1, DSMU35112L / DSMU35112: 35×R1-1/2, DSMU4212L / DSMU4212: 42×R1/2, DSMU4234L / DSMU4234: 42×R3/4, DSMU421L / DSMU421: 42×R1, DSMU42114L / DSMU42114: 42×R1-1/4, DSMU42112L / DSMU42112: 42×R1-1/2, DSMU422L / DSMU422: 42×R2, DSMU5412L / DSMU5412: 54×R1/2, DSMU5434L / DSMU5434: 54×R3/4, DSMU541L / DSMU541: 54×R1, DSMU54114L / DSMU54114: 54×R1-1/4, DSMU54112L / DSMU54112: 54×R1-1/2, DSMU542L / DSMU542: 54×R2. Female Straight Connector with Union Nut: DSFU1512L / DSFU1512: 15×Rp1/2, DSFU1534L / DSFU1534: 15×Rp3/4, DSFU1812L / DSFU1812: 18×Rp1/2, DSFU1834L / DSFU1834: 18×Rp3/4, DSFU2212L / DSFU2212: 22×Rp1/2, DSFU2234L / DSFU2234: 22×Rp3/4, DSFU221L / DSFU221: 22×Rp1, DSFU2812L / DSFU2812: 28×Rp1/2, DSFU2834L / DSFU2834: 28×Rp3/4, DSFU281L / DSFU281: 28×Rp1, DSFU28114L / DSFU28114: 28×Rp1-1/4, DSFU3512L / DSFU3512: 35×Rp1/2, DSFU3534L / DSFU3534: 35×Rp3/4, DSFU35114L / DSFU35114: 35×Rp1-1/4, DSFU351L / DSFU351: 35×Rp1, DSFU35112L / DSFU35112: 35×Rp1-1/2, DSFU4212L / DSFU4212: 42×Rp1/2, DSFU4234L / DSFU4234: 42×Rp3/4, DSFU421L / DSFU421: 42×Rp1, DSFU42114L / DSFU42114: 42×Rp1-1/4, DSFU42112L / DSFU42112: 42×Rp1-1/2, DSFU422L / DSFU422: 42×Rp2, DSFU5412L / DSFU5412: 54×Rp1/2, DSFU5434L / DSFU5434: 54×Rp3/4, DSFU541L / DSFU541: 54×Rp1, DSFU54114L / DSFU54114: 54×Rp1-1/4, DSFU54112L / DSFU54112: 54×Rp1-1/2, DSFU542L / DSFU542: 54×Rp2. Stainless pipes manufactured to EN 10312: Dunshan SS316L Pipe / Dunshan SS304 Pipe: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm. Models added March 2026: Flange Adapter: DSFA761L: 76.1mm, DSFA889L: 88.9mm, DSFA108L: 108mm.

Approval Holder:

Wenzhou Dunshan EPT. Co.,Ltd

Company Name

Wenzhou Dunshan EPT. Co.,Ltd

Address

500 Lingde Road, KunPeng Street, Marine economic development demonstration zone, Wenzhou City

Country

China

View All Listings by this Company

Manufacturer:

Wenzhou Dunshan EPT. Co.,Ltd

Company Name

Wenzhou Dunshan EPT. Co.,Ltd

Address

500 Lingde Road, KunPeng Street, Marine economic development demonstration zone, Wenzhou City

Country

China

View All Listings by this Company

‘APL’ & 'AP' ranges of brass press fittings for use with ‘APE Multylayer' pipe. Connection is achieved via TH or U profile press jaws. AP range, only TH profile; APL range, TH and H profile; TH and H profile from DN 16 to DN32; TH for DN40, DN50 and DN63. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250304017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Pipe: Ape Raccorderie Srl, multilayer, size, made in Italy, Kiwa, pressure, temperature, other tech info printed on body Fittings: APE, size, DVGW, made in Italy, other tech info stamped on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Press fitting straight male ARL10 ARL1002100 Press fitting Straight Male ⅜” X 16 (2.0) ARL1003100 Press fitting Straight Male ½” X 16 (2.0) ARL1003200 Press fitting Straight Male ½” X 20 (2.0) ARL1004200 Press fitting Straight Male ¾” X 20 (2.0) ARL1004900 Press fitting Straight Male ¾” X 25 (2.5) ARL1004300 Press fitting Straight Male ¾” X 26 (3.0) ARL1010900 Press fitting Straight Male 1” X 25 (2.5) ARL1010300 Press fitting Straight Male 1” X 26 (3.0) ARL1010400 Press fitting Straight Male 1” X 32 (3.0) ARL1011500 Press fitting Straight Male 1” ¼ X 40(3.5) ARL1012600 Press fitting Straight Male 1” ½ X 50(4.0) ARL1020700 Press fitting Straight Male 2” X 63(4.5) Press fitting straight female ARL11 ARL1102100 Press fitting Straight Female ⅜” X 16 (2.0) ARL1103100 Press fitting Straight Female ½” X 16 (2.0) ARL1103200 Press fitting Straight Female ½” X 20 (2.0) ARL1104200 Press fitting Straight Female ¾” X 20 (2.0) ARL1104900 Press fitting Straight Female ¾” X 25 (2.5) ARL1104300 Press fitting Straight Female ¾” X 26 (3.0) ARL1110900 Press fitting Straight Female 1” X 25 (2.5) ARL1110300 Press fitting Straight Female 1” X 26 (3.0) ARL1110400 Press fitting Straight Female 1” X 32 (3.0) ARL1111500 Press fitting Straight Female 1” ¼ X 40(3.5) ARL1112600 Press fitting Straight Female 1” ½ X 50(4.0) ARL1120700 Press fitting Straight Female 2” X 63(4.5) Press fitting Straight coupling ARL12 ARL1200110 Pres fitting Straight coupling 16 (2.0) X 16 (2.0) ARL1200220 Pres fitting Straight coupling 20 (2.0) X 20 (2.0) ARL1200990 Pres fitting Straight coupling 25 (2.5) X 25 (2.5) ARL1200330 Pres fitting Straight coupling 26 (3.0) X 26 (3.0) ARL1200440 Pres fitting Straight coupling 32 (3.0) X 32 (3.0) ARL1200550 Pres fitting Straight coupling 40(3.5) X 40(3.5) ARL1200660 Pres fitting Straight coupling 50(4.0) X 50(4.0) ARL1200770 Pres fitting Straight coupling 63(4.5) X 63(4.5) Press fitting Reducer straight coupling ARL13 ARL1300210 Pres fitting Reducer straight coupling 20 (2.0) X 16 (2.0) ARL1300910 Pres fitting Reducer straight coupling 25 (2.5) X 16 (2.0) ARL1300310 Pres fitting Reducer straight coupling 26 (3.0) X 16 (2.0) ARL1300920 Pres fitting Reducer straight coupling 25 (2.5) X 20 (2.0) ARL1300320 Pres fitting Reducer straight coupling 26 (3.0) X 20 (2.0) ARL1300430 Pres fitting Reducer straight coupling 32 (3.0) X 26 (3.0) ARL1300530 Pres fitting Reducer straight coupling 40(3.5) X 26 (3.0) ARL1300540 Pres fitting Reducer straight coupling 40(3.5) X 32 (3.0) ARL1300640 Pres fitting Reducer straight coupling 50(4.0) X 32 (3.0) ARL1300650 Pres fitting Reducer straight coupling 50(4.0) X 40(3.5) ARL1300750 Pres fitting Reducer straight coupling 63(4.5) X 40(3.5) ARL1300760 Pres fitting Reducer straight coupling 63(4.5) X 50(4.0) Press fitting Male Tee ARL20 ARL2003101 Pres fitting Male Tee 16 (2.0) X ½” X 16 (2.0) ARL2004202 Pres fitting Male Tee 20 (2.0) X ¾” X 20 (2.0) ARL2004909 Pres fitting Male Tee 25 (2.5) X ¾” X 25 (2.5) ARL2004303 Pres fitting Male Tee 26 (3.0) X ¾” X 26 (3.0) ARL2010404 Pres fitting Male Tee 32 (3.0) X 1” X 32 (3.0) Press fitting Female Tee ARL21 ARL2103101 Pres fitting Female Tee 16 (2.0) X ½” X 16 (2.0) ARL2103202 Pres fitting Female Tee 20 (2.0) X ½” X 20 (2.0) ARL2104202 Pres fitting Female Tee 20 (2.0) X ¾” X 20 (2.0) ARL2104909 Pres fitting Female Tee 25 (2.5) X ¾” X 25 (2.5) ARL2104303 Pres fitting Female Tee 26 (3.0) X ¾” X 26 (3.0) ARL2110404 Pres fitting Female Tee 32 (3.0) X 1” X 32 (3.0) ARL2110500 Pres fitting Female Tee 1” X 40(3.5) ARL2110600 Pres fitting Female Tee 1” X 50(4.0) ARL2110700 Pres fitting Female Tee 1” X 63(4.5) ARL2111500 Pres fitting Female Tee 1”1/4 X 40(3.5) ARL2112600 Pres fitting Female Tee 1”1/2 X 50(4.0) Press fitting Tee ARL22 ARL2200111 Pres fitting Tee 16 (2.0) X 16 (2.0) X 16 (2.0) ARL2200222 Pres fitting Tee 20 (2.0) X 20 (2.0) X 20 (2.0) ARL2200999 Pres fitting Tee 25 (2.5) X 25 (2.5) X 25 (2.5) ARL2200333 Pres fitting Tee 26 (3.0) X 26 (3.0) X 26 (3.0) ARL2200444 Pres fitting Tee 32 (3.0) X 32 (3.0) X 32 (3.0) ARL2200555 Pres fitting Tee 40(3.5) X 40(3.5) X 40(3.5) ARL2200666 Pres fitting Tee 50(4.0) X 50(4.0) X 50(4.0) ARL2200777 Pres fitting Tee 63(4.5) X 63(4.5) X 63(4.5) Press fitting Reduced Tee ARL24 ARL2400121 Pres fitting Reduced Tee 16 (2.0) X 20 (2.0) X 16 (2.0) ARL2400211 Pres fitting Reduced Tee 20 (2.0) X 16 (2.0) X 16 (2.0) ARL2400212 Pres fitting Reduced Tee 20 (2.0) X 16 (2.0) X 20 (2.0) ARL2400221 Pres fitting Reduced Tee 20 (2.0) X 20 (2.0) X 16 (2.0) ARL2400919 Pres fitting Reduced Tee 25 (2.5) X 16 (2.0) X 25 (2.5) ARL2400922 Pres fitting Reduced Tee 25 (2.5) X 20 (2.0) X 20 (2.0) ARL2400929 Pres fitting Reduced Tee 25 (2.5) X 20 (2.0) X 25 (2.5) ARL2400992 Pres fitting Reduced Tee 25 (2.5) X 25 (2.5) X 20 (2.0) ARL2400313 Pres fitting Reduced Tee 26 (3.0) X 16 (2.0) X 26 (3.0) ARL2400322 Pres fitting Reduced Tee 26 (3.0) X 20 (2.0) X 20 (2.0) ARL2400323 Pres fitting Reduced Tee 26 (3.0) X 20 (2.0) X 26 (3.0) ARL2400332 Pres fitting Reduced Tee 26 (3.0) X 26 (3.0) X 20 (2.0) ARL2400434 Pres fitting Reduced Tee 32 (3.0) X 26 (3.0) X 32 (3.0) ARL2400443 Pres fitting Reduced Tee 32 (3.0) X 32 (3.0) X 26 (3.0) ARL2400424 Pres fitting Reduced Tee 32 (3.0) X 20 (2.0) X 32 (3.0) ARL2400499 Pres fitting Reduced Tee 32 (3.0) X 25 (2.5) X 25 (2.5) ARL2400494 Pres fitting Reduced Tee 32 (3.0) X 25 (2.5) X 32 (3.0) ARL2400433 Pres fitting Reduced Tee 32 (3.0) X 26 (3.0) X 26 (3.0) ARL2400449 Pres fitting Reduced Tee 32 (3.0) X 32 (3.0) X 25 (2.5) ARL2400525 Pres fitting Reduced Tee 40(3.5) X 20(2.0) X 40(3.5) ARL2400595 Pres fitting Reduced Tee 40(3.5) X 25 (2.5) X 40(3.5) ARL2400535 Pres fitting Reduced Tee 40(3.5) X 26(3.0) X 40(3.5) ARL2400545 Pres fitting Reduced Tee 40(3.5) X 32(3.0) X 40(3.5) ARL2400626 Pres fitting Reduced Tee 50(4.0) X 20(2.0) X 50(4.0) ARL2400696 Pres fitting Reduced Tee 50(4.0) X 25(2.5) X 50(4.0) ARL2400636 Pres fitting Reduced Tee 50(4.0) X 26(3.0) X 50(4.0) ARL2400646 Pres fitting Reduced Tee 50(4.0) X 32(3.0) X 50(4.0) ARL2400656 Pres fitting Reduced Tee 50(4.0) X 40(3.5) X 50(4.0) ARL2400757 Pres fitting Reduced Tee 63(4.5) X 40(3.5) X 63(4.5) ARL2400767 Pres fitting Reduced Tee 63(4.5) X 50(4.0) X 63(4.5) Press fitting Male Elbow ARL30 ARL3003100 Press fitting Male Elbow ½” X 16 (2.0) ARL3003200 Press fitting Male Elbow ½” X 20 (2.0) ARL3004200 Press fitting Male Elbow ¾” X 20 (2.0) ARL3004900 Press fitting Male Elbow ¾” X 25 (2.5) ARL3004300 Press fitting Male Elbow ¾” X 26 (3.0) ARL3010900 Press fitting Male Elbow 1” X 25 (2.5) ARL3010300 Press fitting Male Elbow 1” X 26 (3.0) ARL3010400 Press fitting Male Elbow 1” X 32 (3.0) ARL3011500 Press fitting Male Elbow 1” ¼ X 40(3.5) ARL3012600 Press fitting Male Elbow 1” ½ X 50(4.0) ARL3020700 Press fitting Male Elbow 2” X 63(4.5) Press fitting Female Elbow ARL31 ARL3103100 Press fitting Female Elbow ½” X 16 (2.0) ARL3103200 Press fitting Female Elbow ½” X 20 (2.0) ARL3104200 Press fitting Female Elbow ¾” X 20 (2.0) ARL3104900 Press fitting Female Elbow ¾” X 25 (2.5) ARL3104300 Press fitting Female Elbow ¾” X 26 (3.0) ARL3110900 Press fitting Female Elbow 1” X 25 (2.5) ARL3110300 Press fitting Female Elbow 1” X 26 (3.0) ARL3110400 Press fitting Female Elbow 1” X 32 (3.0) ARL3111500 Press fitting Female Elbow 1” ¼ X 40(3.5) ARL3112600 Press fitting Female Elbow 1” ½ X 50(4.0) Press fitting Elbow ARL32 ARL3200110 Pres fitting Elbow 16 (2.0) X 16 (2.0) ARL3200220 Pres fitting Elbow 20 (2.0) X 20 (2.0) ARL3200990 Pres fitting Elbow 25 (2.5) X 25 (2.5) ARL3200330 Pres fitting Elbow 26 (3.0) X 26 (3.0) ARL3200440 Pres fitting Elbow 32 (3.0) X 32 (3.0) ARL3200550 Pres fitting Elbow 40(3.5) X 40(3.5) ARL3200660 Pres fitting Elbow 50(4.0) X 50(4.0) ARL3200770 Pres fitting Elbow 63(4.5) X 63(4.5) Press fitting Elbow 45° ARL88 ARL8800555 Pres fitting Elbow 45° 40(3.5) X 40(3.5) ARL8800666 Pres fitting Elbow 45° 50(4.0) X 50(4.0) ARL8800777 Pres fitting Elbow 45° 63(4.5) X 63(4.5) Press fitting Elbow with flange ARL35 ARL3503100 Pres fitting Elbow with flange ½ X Ø16 ARL3503200 Pres fitting Elbow with flange ½ X Ø20 ARL3504200 Pres fitting Elbow with flange ¾ X Ø20 Two elbow with plate ARL38 ARL3803100 Pres fitting Two elbow with flange ½ X Ø16 Two terminal with plate ARL50 ARL5003100 Pres fitting Two terminal with flange ½ X Ø16 Tap ARL60 ARL600110 Pres fitting Tap Ø16 X Ø16 ARL600220 Pres fitting Tap Ø20 X Ø20 Press fitting straight with rotating nut ARL70 ARL7052100 Pres fitting straight with rotating nut ⅜ X Ø16 ARL7053100 Pres fitting straight with rotating nut ½” X 16 (2.0) ARL7053200 Pres fitting straight with rotating nut ½” X 20 (2.0) ARL7054100 Pres fitting straight with rotating nut ¾” X 16 (2.0) ARL7054200 Pres fitting straight with rotating nut ¾” X 20 (2.0) ARL7054900 Pres fitting straight with rotating nut ¾” X 25 (2.5) ARL7054300 Pres fitting straight with rotating nut ¾” X 26 (3.0) ARL7060900 Pres fitting straight with rotating nut 1” X 25 (2.5) ARL7060300 Pres fitting straight with rotating nut 1” X 26 (3.0) ARL7060400 Pres fitting straight with rotating nut 1” X 32 (3.0) ARL7061500 Pres fitting straight with rotating nut 1” ¼ X 40 (3.5) ARL7062500 Pres fitting straight with rotating nut 1” ½ X 40 (3.5) ARL7062600 Pres fitting straight with rotating nut 1” ½ X 50 (4.0) ARL7070600 Pres fitting straight with rotating nut 2” X 50 (4.0) ARL7070700 Pres fitting straight with rotating nut 2” X 63 (4.5) Pres fitting plant test blind cap ARL71 ARL7100100 Pres fitting plant test blind cap 16 (2.0) ARL7100200 Pres fitting plant test blind cap 20 (2.0) ARL7100900 Pres fitting plant test blind cap 25 (2.5) ARL7100300 Pres fitting plant test blind cap 26 (3.0) ARL7100400 Pres fitting plant test blind cap 32 (3.0) Press fitting Elbow with rotating nut ARL72 ARL7253100 Pres fitting Elbow with rotating nut ½” X 16 (2.0) ARL7253200 Pres fitting Elbow with rotating nut ½” X 20 (2.0) ARL7254200 Pres fitting Elbow with rotating nut ¾” X 20 (2.0) Press fitting Tee with rotating nut ARL73 ARL7353101 Pres fitting Tee with rotating nut ½” X 16 (2.0) ARL7353202 Pres fitting Tee with rotating nut ½” X 20 (2.0) Serie AP Press fitting Straight Male AP101 3AP1011216 Press fitting Straight Male ½” X 16 (2.0) 3AP1011220 Press fitting Straight Male ½” X 20 (2.0) 3AP1013416 Press fitting Straight Male ¾” X 16 (2.0) 3AP1013420 Press fitting Straight Male ¾” X 20 (2.0) 3AP1013426 Press fitting Straight Male ¾” X 26 (3.0) 3AP1010126 Press fitting Straight Male 1” X 26 (3.0) 3AP1010132 Press fitting Straight Male 1” X 32 (3.0) Press fitting straight female AP102 3AP1021216 Press fitting Straight Female ½” X 16 (2.0) 3AP1021220 Press fitting Straight Female ½” X 20 (2.0) 3AP1023420 Press fitting Straight Female ¾” X 20 (2.0) 3AP1023426 Press fitting Straight Female ¾” X 26 (3.0) 3AP1020126 Press fitting Straight Female 1” X 26 (3.0) 3AP1020132 Press fitting Straight Female 1” X 32 (3.0) Press fitting Straight coupling & straight reducer coupling AP103 3AP1031616 Pres fitting Straight coupling 16 (2.0) X 16 (2.0) 3AP1032020 Pres fitting Straight coupling 20 (2.0) X 20 (2.0) 3AP1032626 Pres fitting Straight coupling 26 (3.0) X 26 (3.0) 3AP1033232 Pres fitting Straight coupling 32 (3.0) X 32 (3.0) 3AP1032016 Pres fitting Straight coupling 20 (2.0) X 16 (2.0) 3AP1032620 Pres fitting Straight coupling 26 (3.0) X 20 (2.0) 3AP1033226 Pres fitting Straight coupling 32 (3.0) X 26 (3.0) Press fitting Male Tee AP133 3AP1331216 Pres fitting Male Tee 16 (2.0) X ½” X 16 (2.0) 3AP1331220 Pres fitting Male Tee 16 (2.0) X ½” X 20 (2.0) 3AP1333420 Pres fitting Male Tee 20 (2.0) X ¾” X 20 (2.0) 3AP1333426 Pres fitting Male Tee 26 (3.0) X ¾” X 26 (3.0) 3AP1330132 Pres fitting Male Tee 32 (3.0) X 1” X 32 (3.0) Press fitting Female Tee AP132 3AP1321216 Pres fitting Female Tee 16 (2.0) X ½” X 16 (2.0) 3AP1321220 Pres fitting Female Tee 20 (2.0) X ½” X 20 (2.0) 3AP1323420 Pres fitting Female Tee 20 (2.0) X ¾” X 20 (2.0) 3AP1323426 Pres fitting Female Tee 26 (3.0) X ¾” X 26 (3.0) 3AP1320132 Pres fitting Female Tee 32 (3.0) X 1” X 32 (3.0) Press fitting Tee & reducing Tee AP131 3APT161616 Pres fitting Tee 16 (2.0) X 16 (2.0) X 16 (2.0) 3APT202020 Pres fitting Tee 20 (2.0) X 20 (2.0) X 20 (2.0) 3APT262626 Pres fitting Tee 26 (3.0) X 26 (3.0) X 26 (3.0) 3APT323232 Pres fitting Tee 32 (3.0) X 32 (3.0) X 32 (3.0) 3APT162016 Pres fitting Reduced Tee 16 (2.0) X 20 (2.0) X 16 (2.0) 3APT201616 Pres fitting Reduced Tee 20 (2.0) X 16 (2.0) X 16 (2.0) 3APT201620 Pres fitting Reduced Tee 20 (2.0) X 16 (2.0) X 20 (2.0) 3APT202016 Pres fitting Reduced Tee 20 (2.0) X 20 (2.0) X 16 (2.0) 3APT202620 Pres fitting Reduced Tee 20 (2.0) X 26 (3.0) X 20 (2.0) 3APT261620 Pres fitting Reduced Tee 26 (3.0) X 16 (2.0) X 20 (2.0) 3APT261626 Pres fitting Reduced Tee 26 (3.0) X 16 (2.0) X 26 (3.0) 3APT262016 Pres fitting Reduced Tee 26 (3.0) X 20 (2.0) X 16 (2.0) 3APT262020 Pres fitting Reduced Tee 26 (3.0) X 20 (2.0) X 20 (2.0) 3APT262026 Pres fitting Reduced Tee 26 (3.0) X 20 (2.0) X 26 (3.0) 3APT262616 Pres fitting Reduced Tee 26 (3.0) X 26 (3.0) X 16 (2.0) 3APT262620 Pres fitting Reduced Tee 26 (3.0) X 26 (3.0) X 20 (2.0) 3APT263226 Pres fitting Reduced Tee 26 (3.0) X 32 (3.0) X 26 (3.0) 3APT322026 Pres fitting Reduced Tee 32 (3.0) X 20 (2.0) X 26 (3.0) 3APT322032 Pres fitting Reduced Tee 32 (3.0) X 20 (2.0) X 32 (3.0) 3APT322626 Pres fitting Reduced Tee 32 (3.0) X 26 (3.0) X 26 (3.0) 3APT322632 Pres fitting Reduced Tee 32 (3.0) X 26 (3.0) X 32 (3.0) 3APT323226 Pres fitting Reduced Tee 32 (3.0) X 32 (3.0) X 26 (3.0) Press fitting Elbow AP151 3AP1511616 Pres fitting Elbow 16 (2.0) X 16 (2.0) 3AP1512020 Pres fitting Elbow 20 (2.0) X 20 (2.0) 3AP1512626 Pres fitting Elbow 26 (3.0) X 26 (3.0) 3AP1513232 Pres fitting Elbow 32 (3.0) X 32 (3.0) Press fitting Female Elbow AP152 3AP1521216 Press fitting Female Elbow ½” X 16 (2.0) 3AP1521220 Press fitting Female Elbow ½” X 20 (2.0) 3AP1523420 Press fitting Female Elbow ¾” X 20 (2.0) 3AP1523426 Press fitting Female Elbow ¾” X 26 (3.0) 3AP1520126 Press fitting Female Elbow 1” X 26 (3.0) 3AP1520132 Press fitting Female Elbow 1” X 32 (3.0) Press fitting Male Elbow AP153 3AP1531216 Press fitting Male Elbow ½” X 16 (2.0) 3AP1531220 Press fitting Male Elbow ½” X 20 (2.0) 3AP1533420 Press fitting Male Elbow ¾” X 20 (2.0) 3AP1533426 Press fitting Male Elbow ¾” X 26 (3.0) 3AP1530126 Press fitting Male Elbow 1” X 26 (3.0) 3AP1530132 Press fitting Male Elbow 1” X 32 (3.0) Press fitting Two elbow with plate AP492 3AP4921216 Pres fitting Two elbow with plate ½” X 16 (2.0) 3AP4921220 Pres fitting Two elbow with plate ½” X 20 (2.0) Press fitting Tap With short underneck AP136 3AP1361616C Pres fitting Tap With short underneck 16 (2.0) X 16 (2.0) 3AP1362020C Pres fitting Tap With short underneck 20 (2.0) X 20 (2.0) Press fitting straight with rotating nut AP185 3AP1851216 Pres fitting straight with rotating nut ½” X 16 (2.0) 3AP1851220 Pres fitting straight with rotating nut ½” X 20 (2.0) 3AP1853416 Pres fitting straight with rotating nut ¾” X 16 (2.0) 3AP1853420 Pres fitting straight with rotating nut ¾” X 20 (2.0) 3AP1850126 Pres fitting straight with rotating nut 1” X 26 (3.0) 3AP1850132 Pres fitting straight with rotating nut 1” X 32 (3.0) Press fitting Elbow with rotating nut AP187 3AP1873420 Pres fitting Elbow with rotating nut ¾” X 20 (2.0) APE Multylayer Multilayer Pipe 16B 9MN021620XXX Multilayer pipe PE-X/Al/PE-X DN 16 20A 9MN032020XXX Multilayer pipe PE-X/Al/PE-X DN 20 Al 0.3 20D 9MN022020XXX Multilayer pipe PE-X/Al/PE-X DN 20 Al 0.2 25A 9MN352525XXX Multilayer pipe PE-X/Al/PE-X DN 25 26A 9MN042630XXX Multilayer pipe PE-X/Al/PE-X DN 26 32A 9MN453230XXX Multilayer pipe PE-X/Al/PE-X DN 32 40A 9MN054035XXX Multilayer pipe PE-X/Al/PE-X DN 40 50A 9MN065040XXX Multilayer pipe PE-X/Al/PE-X DN 50 63A 9MN096345XXX Multilayer pipe PE-X/Al/PE-X DN 63

Manufacturer:

APE Raccorderie Srl.

Company Name

APE Raccorderie Srl.

Address

Via Guido Gozzano 8, 25068 Sarezzo (BS), Italy

View All Listings by this Company

Range of press fittings (brass bodies - various finishes) with stainless steel press (‘TH’ profile) collars and EPDM O-rings for use with “VMA” range of PEX/AL/PEX multilayer pipe (for press fitting connections and compression for adaptor fittings only) or copper pipe manufactured to EN1057 (compression connections). Maximum operating temperature: 95°C. Maximum operating pressure: 10 bar.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241102086

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Fittings: Pipelife and size on body. Pipe: Pipelife, Size, Date of manufacture (DD/MM/YY), Pipe Standard and other information on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Pipes (diameter): VMA16 16mm, VMA20 20mm, VMA25 25mm, VNMA26 26mm, VMA32 32mm. Fittings: Press fit connections are 16mm, 20mm, 25mm, 26mm and 32mm. Compression connections are 15mm, 22mm, 28mm, 1/2", 3/4" and 1”. “M” or “F” connection types below are BSP thread. Swivel joints are BSP captive nut connections. 1533000035 Equal Straight Union S16X16 1533000037 Equal Straight Union S20X20 VMS090032525 Equal Straight Union S25X25 1533000040 Equal Straight Union S26X26 1533000044 Equal Straight Union S32X32 1533000036 Unequal Straight Union S20X16 VMS190022516 Unequal Straight Union S25X16 VMS190032520 Unequal Straight Union S25X20 1533000038 Unequal Straight Union S26X16 1533000039 Unequal Straight Union S26X20 1533000041 Unequal Straight Union S32X16 1533000042 Unequal Straight Union S32X20 VMS190083225 Unequal Straight Union S32X25 1533000043 Unequal Straight Union S32X26 VMS290011638 Male Straight Union S16X3/8M 1533000125 Male Straight Union S16X1/2M VMS290032012 Male Straight Union S20X1/2M VMS290042512 Male Straight Union S25X1/2M VMS290052612 Male Straight Union S26X1/2M VMS290061634 Male Straight Union S16X3/4M 1533000128 Male Straight Union S20X3/4M VMS290082534 Male Straight Union S25X3/4M 1533000129 Male Straight Union S26X3/4M VMS290102010 Male Straight Union S20X1M VMS290112510 Male Straight Union S25X1M 1533000130 Male Straight Union S26X1M 1533000131 Male Straight Union S32X1M 1533000137 Female Straight Union S16X1/2F VMS390022012 Female Straight Union S20X1/2F VMS390031634 Female Straight Union S16X3/4F 1533000139 Female Straight Union S20X3/4F VMS390052534 Female Straight Union S25X3/4F 1533000140 Female Straight Union S26X3/4F VMS390072010 Female Straight Union S20X1F VMS390082510 Female Straight Union S25X1F 1533000141 Female Straight Union S26X1F 1533000142 Female Straight Union S32X1F VMS490011638 Female Swivel Straight Union SH16X3/8F VMS490021612 Female Swivel Straight Union SH16X1/2F VMS490032012 Female Swivel Straight Union SH20X1/2F VMS490042034 Female Swivel Straight Union SH20X3/4F VMS490052534 Female Swivel Straight Union SH25X3/4F VMS490062634 Female Swivel Straight Union SH26X3/4F VMS490072510 Female Swivel Straight Union SH25X1F VMS490082610 Female Swivel Straight Union SH26X1F VMS490093210 Female Swivel Straight Union SH32X1F VMS4901031114 Female Swivel Straight Union SH32X1 1/4F 1533000159 Equal Elbow L16X16 1533000160 Equal Elbow L20X20 VML090032525 Equal Elbow L25X25 1533000161 Equal Elbow L26X26 1533000162 Equal Elbow L32X32 VML19001161645 45°Elbow L16X45° VML19002202045 45°Elbow L20X45° VML19003252545 45°Elbow L25X45° VML19004262645 45°Elbow L26X45° VML19005323245 45°Elbow L32X45° VML290011638 Male Elbow L16X3/8M 1533000166 Male Elbow L16X1/2M VML290032012 Male Elbow L20X1/2M VML290041634 Male Elbow L16X3/4M 1533000168 Male Elbow L20X3/4M VML290062534 Male Elbow L25X3/4M 1533000169 Male Elbow L26X3/4M VML290082010 Male Elbow L20X1M VML290092510 Male Elbow L25X1M 1533000170 Male Elbow L26X1M 1533000171 Male Elbow L32X1M 1533000180 Female Elbow L16X1/2FC57:C70 VML390022012 Female Elbow L20X1/2F VML390031634 Female Elbow L16X3/4F 1533000182 Female Elbow L20X3/4F 1533000183 Female Elbow L26X3/4F VML390062010 Female Elbow L20X1F 1533000184 Female Elbow L26X1F 1533000185 Female Elbow L32X1F VML490011612 Female Plated Elbow L16X1/2F(A) VML490022012 Female Plated Elbow L20X1/2F(A) VML490032034 Female Plated Elbow L20X3/4F(A) VML490042534 Female Plated Elbow L25X3/4F(A) VML490052634 Female Plated Elbow L26X3/4F(A) VML590011638 Female Swivel Elbow LH16X3/8F VML590021612 Female Swivel Elbow LH16X1/2F VML590032012 Female Swivel Elbow LH20X1/2F VML590041634 Female Swivel Elbow LH16X3/4F VML590052034 Female Swivel Elbow LH20X3/4F VML590062534 Female Swivel Elbow LH25X3/4F VML590072634 Female Swivel Elbow LH26X3/4F VML590082610 Female Swivel Elbow LH26X1F VML590093210 Female Swivel Elbow LH32X1F 1533000064 Equal Tee T16X16X16 1533000067 Equal Tee T20X20X20 VMT09003252525 Equal Tee T25X25X25 1533000008 Equal Tee T26X26X26 1533000083 Equal Tee T32X32X32 VMT19001161620 Unequal Tee T16X16X20 1533000066 Unequal Tee T20X16X16 1533000006 Unequal Tee T20X16X20 1533000007 Unequal Tee T20X20X16 VMT19005202025 Unequal Tee T20X20X25 VMT19006202026 Unequal Tee T20X20X26 VMT19007251616 Unequal Tee T25X16X16 VMT19008251620 Unequal Tee T25X16X20 VMT19009251625 Unequal Tee T25X16X25 VMT19010252016 Unequal Tee T25X20X16 VMT19011252020 Unequal Tee T25X20X20 VMT19012252025 Unequal Tee T25X20X25 VMT19013252516 Unequal Tee T25X25X16 VMT19014252520 Unequal Tee T25X25X20 VMT19015252532 Unequal Tee T25X25X32 VMT19016261616 Unequal Tee T26X16X16 1533000069 Unequal Tee T26X16X20 1533000070 Unequal Tee T26X16X26 1533000071 Unequal Tee T26X20X16 1533000072 Unequal Tee T26X20X20 1533000073 Unequal Tee T26X20X26 1533000074 Unequal Tee T26X26X16 1533000075 Unequal Tee T26X26X20 VMT19024262632 Unequal Tee T26X26X32 VMT19025321616 Unequal Tee T32X16X16 1533000077 Unequal Tee T32X16X32 VMT19027322020 Unequal Tee T32X20X20 VMT19028322025 Unequal Tee T32X20X25 1533000078 Unequal Tee T32X20X26 1533000079 Unequal Tee T32X20X32 VMT19031322520 Unequal Tee T32X25X20 VMT19032322525 Unequal Tee T32X25X25 VMT19033322532 Unequal Tee T32X25X32 VMT19034322620 Unequal Tee T32X26X20 1533000080 Unequal Tee T32X26X26 1533000081 Unequal Tee T32X26X32 VMT19037323216 Unequal Tee T32X32X16 VMT19038323220 Unequal Tee T32X32X20 VMT19039323225 Unequal Tee T32X32X25 1533000082 Unequal Tee T32X32X26 VMT29001161216 Unequal Tee T16X1/2FX16 VMT29002163416 Unequal Tee T16X3/4FX16 VMT29003201220 Unequal Tee T20X1/2FX20 VMT29004203410 Unequal Tee T20X3/4FX20 VMT29005251225 Unequal Tee T25X1/2FX25 VMT29006253425 Unequal Tee T25X3/4FX25 VMT29007251025 Unequal Tee T25X1FX25 VMT29008261226 Unequal Tee T26X1/2FX26 VMT29009263426 Unequal Tee T26X3/4FX26 VMT29010261026 Unequal Tee T26X1FX26 VMT29011323432 Unequal Tee T32X3/4FX32 VMT29012321032 Unequal Tee T32X1FX32 VMD0900116 End Cap D16 VMD0900220 End Cap D20 VMD0900325 End Cap D25 VMD0900426 End Cap D26 VMD0900532 End Cap D32 3095904042 Raiator Elbow -Long 300mm L16X300mm 3095904034 Compression x Press Straight Union S16X1/2'' VMS590022012 Compression x Press Straight Union S20X1/2'' VMS590031634 Compression x Press Straight Union S16X3/4'' 3095904035 Compression x Press Straight Union S20X3/4'' VMS590052534 Compression x Press Straight Union S25X3/4'' VMS590062634 Compression x Press Straight Union S26X3/4'' VMS590072510 Compression x Press Straight Union S25X1'' 3095904036 Compression x Press Straight Union S26X1'' 3095904037 Compression x Press Straight Union S32X1'' VMS690011615 Compression x Press Straight Union S16X15 VMS690021520 Compression x Press Straight Union S15X20 VMS690031622 Compression x Press Straight Union S16X22 VMS690042022 Compression x Press Straight Union S20X22 VMS690052522 Compression x Press Straight Union S25X22 VMS690062622 Compression x Press Straight Union S26X22 VMS690072525 Compression x Press Straight Union S25X25 VMS690082628 Compression x Press Straight Union S26X28 VMS690093228 Compression x Press Straight Union S32X28 VML890011612 Compression x Press Elbow L16X1/2'' VML890022034 Compression x Press Elbow L20X3/4'' VML990011516 Compression x Press Elbow L15X16 VML990022220 Compression x Press Elbow L22X20 VMA090012826 Adaptor EHA 28X26mm 3095904038 Adaptor EHA 1''X26mm VMA090033416 Adaptor EHA 3/4''X16mm VMA090042220 Adaptor EHA 22X20mm 3095904039 Adaptor EHA 3/4''X20mm 3095904043 Adaptor EHA 14.7/15X16mm 3095904028 Welded x Press Straight Union S16X1/2'' VMS790022012 Welded x Press Straight Union S20X1/2'' 3095904029 Welded x Press Straight Union S20X3/4'' VMS790042534 Welded x Press Straight Union S25X3/4'' VMS790052634 Welded x Press Straight Union S26X3/4'' VMS790062510 Welded x Press Straight Union S25X1'' 3095904030 Welded x Press Straight Union S26X1'' 3095904031 Welded x Press Straight Union S32X1'' VMS890011615 Welded x Press Straight Union S16X15 VMS890022015 Welded x Press Straight Union S20X15 VMS890032220 Welded x Press Straight Union S22X20 VMS890042522 Welded x Press Straight Union S25X22 VMS890052622 Welded x Press Straight Union S26X22 VMS890062528 Welded x Press Straight Union S25X28 VMS890072628 Welded x Press Straight Union S26X28 VMS890083228 Welded x Press Straight Union S32X28 3095904041 Shower Bracket -150mm L16X1/2F(B)X150mm 3095904032 Female Swivel Straight Union-Adaptor SH16X1/2''(15mm)-Adap 3095904033 Female Swivel Straight Union-Adaptor SH20X3/4''-Adap

Approval Holder:

Pipelife Ireland Solutions Ltd.

Company Name

Pipelife Ireland Solutions Ltd.

Address

Little Island, Co Cork

Postcode

T45 TX05

Country

Ireland.

Phone

+ 353 21 4884700

General Email

sales@qualityplastics.co.uk

View All Listings by this Company

Range of stainless steel press fittings to be used with stainless steel pipes. Connection is achieved via M profile press jaws. For above ground and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250304021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Assotherm, material, WRAS logo, Size etched on fittings and pipe

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

RAX270000150 RAZ270000150 Equal Coupling 15mm RAX270000180 RAZ270000180 Equal Coupling 18mm RAX270000220 RAZ270000220 Equal Coupling 22mm RAX270000280 RAZ270000280 Equal Coupling 28mm RAX270000350 RAZ270000350 Equal Coupling 35mm RAX270000420 RAZ270000420 Equal Coupling 42mm RAX270000540 RAZ270000540 Equal Coupling 54mm RAX270000760 RAZ270000760 Equal Coupling 76.1mm RAX270000890 RAZ270000890 Equal Coupling 88.9mm RAX270001080 RAZ270001080 Equal Coupling 108mm RAX246015180 RAZ246015180 Reducer Coupling B 18×15mm RAX246015220 RAZ246015220 Reducer Coupling B 22×15mm RAX246018220 RAZ246018220 Reducer Coupling B 22×18mm RAX246015280 RAZ246015280 Reducer Coupling B 28×15mm RAX246018280 RAZ246018280 Reducer Coupling B 28×18mm RAX246022280 RAZ246022280 Reducer Coupling B 28×22mm RAX246015350 RAZ246015350 Reducer Coupling B 35×15mm RAX246018350 RAZ246018350 Reducer Coupling B 35×18mm RAX246022350 RAZ246022350 Reducer Coupling B 35×22mm RAX246028350 RAZ246028350 Reducer Coupling B 35×28mm RAX246015420 RAZ246015420 Reducer Coupling B 42×15mm RAX246018420 RAZ246018420 Reducer Coupling B 42×18mm RAX246022420 RAZ246022420 Reducer Coupling B 42×22mm RAX246028420 RAZ246028420 Reducer Coupling B 42×28mm RAX246035420 RAZ246035420 Reducer Coupling B 42×35mm RAX246015540 RAZ246015540 Reducer Coupling B 54×15mm RAX246018540 RAZ246018540 Reducer Coupling B 54×18mm RAX246022540 RAZ246022540 Reducer Coupling B 54×22mm RAX246028540 RAZ246028540 Reducer Coupling B 54×28mm RAX246035540 RAZ246035540 Reducer Coupling B 54×35mm RAX246042540 RAZ246042540 Reducer Coupling B 54×42mm RAX246054760 RAZ246054760 Reducer Coupling B 76.1×54mm RAX246054890 RAZ246054890 Reducer Coupling B 88.9×54mm RAX246076890 RAZ246076890 Reducer Coupling B 88.9×76.1mm RAX246054108 RAZ246054108 Reducer Coupling B 108×54mm RAX246076108 RAZ246076108 Reducer Coupling B 108×76.1mm RAX246089108 RAZ246089108 Reducer Coupling B 108×88.9mm RAX240015180 RAZ240015180 Reducer Coupling 18x15mm RAX240015220 RAZ240015220 Reducer Coupling 22x15mm RAX240018220 RAZ240018220 Reducer Coupling 22x18mm RAX240015280 RAZ240015280 Reducer Coupling 28x15mm RAX240018280 RAZ240018280 Reducer Coupling 28x18mm RAX240022280 RAZ240022280 Reducer Coupling 28x22mm RAX240015350 RAZ240015350 Reducer Coupling 35x15mm RAX240018350 RAZ240018350 Reducer Coupling 35x18mm RAX240022350 RAZ240022350 Reducer Coupling 35x22mm RAX240028350 RAZ240028350 Reducer Coupling 35x28mm RAX2400154200 RAZ2400154200 Reducer Coupling 42x15mm RAX240018420 RAZ240018420 Reducer Coupling 42x18mm RAX240022420 RAZ240022420 Reducer Coupling 42x22mm RAX240028420 RAZ240028420 Reducer Coupling 42x28mm RAX240035420 RAZ240035420 Reducer Coupling 42x35mm RAX240042540 RAZ240042540 Reducer Coupling 54x42mm RAX240054760 RAZ240054760 Reducer Coupling 76.1x54mm RAX240054890 RAZ240054890 Reducer Coupling 88.9x54mm RAX240076890 RAZ240076890 Reducer Coupling 88.9x76.1mm RAX240054108 RAZ240054108 Reducer Coupling 108x54mm RAX240076108 RAZ240076108 Reducer Coupling 108x76.1mm RAX240089108 RAZ240089108 Reducer Coupling 108x88.9mm RAX270L00150 RAZ270L00150 Slip Coupling 15mm RAX270L00180 RAZ270L00180 Slip Coupling 18mm RAX270L00220 RAZ270L00220 Slip Coupling 22mm RAX270L00280 RAZ270L00280 Slip Coupling 28mm RAX270L00350 RAZ270L00350 Slip Coupling 35mm RAX270L00420 RAZ270L00420 Slip Coupling 42mm RAX270L00540 RAZ270L00540 Slip Coupling 54mm RAX270L00760 RAZ270L00760 Slip Coupling 76.1mm RAX270L00890 RAZ270L00890 Slip Coupling 88.9mm RAX270L01080 RAZ270L01080 Slip Coupling 108mm RAX280005150 RAZ280005150 Adapter with Female Threaded End 15×Rp1/2 RAX280007150 RAZ280007150 Adapter with Female Threaded End 15×Rp3/4 RAX280005180 RAZ280005180 Adapter with Female Threaded End 18×Rp1/2 RAX280007180 RAZ280007180 Adapter with Female Threaded End 18×Rp3/4 RAX280005220 RAZ280005220 Adapter with Female Threaded End 22×Rp1/2 RAX280007220 RAZ280007220 Adapter with Female Threaded End 22×Rp3/4 RAX280010220 RAZ280010220 Adapter with Female Threaded End 22×Rp1 RAX280007280 RAZ280007280 Adapter with Female Threaded End 28×Rp3/4 RAX280010280 RAZ280010280 Adapter with Female Threaded End 28×Rp1 RAX280012350 RAZ280012350 Adapter with Female Threaded End 35×Rp1-1/4 RAX280010350 RAZ280010350 Adapter with Female Threaded End 35×Rp1 RAX280015420 RAZ280015420 Adapter with Female Threaded End 42×Rp1-1/2 RAX280020540 RAZ280020540 Adapter with Female Threaded End 54×Rp2 RAX271005150 RAZ271005150 Adapter with Male Threaded End 15×R1/2 RAX271007150 RAZ271007150 Adapter with Male Threaded End 15×R3/4 RAX271005180 RAZ271005180 Adapter with Male Threaded End 18×R1/2 RAX271007180 RAZ271007180 Adapter with Male Threaded End 18×R3/4 RAX271005220 RAZ271005220 Adapter with Male Threaded End 22×R1/2 RAX271007220 RAZ271007220 Adapter with Male Threaded End 22×R3/4 RAX271010220 RAZ271010220 Adapter with Male Threaded End 22×R1 RAX271007280 RAZ271007280 Adapter with Male Threaded End 28×R3/4 RAX271010280 RAZ271010280 Adapter with Male Threaded End 28×R1 RAX271012350 RAZ271012350 Adapter with Male Threaded End 35×R1-1/4 RAX271010350 RAZ271010350 Adapter with Male Threaded End 35×R1 RAX271015420 RAZ271015420 Adapter with Male Threaded End 42×R1-1/2 RAX271020540 RAZ271020540 Adapter with Male Threaded End 54×R2 RAX271025760 RAZ271025760 Adapter with Male Threaded End 76.1xR2-1/2 RAX271030890 RAZ271030890 Adapter with Male Threaded End 88.9xR3 RAX090000150 RAZ090000150 Elbow 90° 15mm RAX090000180 RAZ090000180 Elbow 90° 18mm RAX090000220 RAZ090000220 Elbow 90° 22mm RAX090000280 RAZ090000280 Elbow 90° 28mm RAX090000350 RAZ090000350 Elbow 90° 35mm RAX090000420 RAZ090000420 Elbow 90° 42mm RAX090000540 RAZ090000540 Elbow 90° 54mm RAX090000760 RAZ090000760 Elbow 90° 76.1mm RAX090000890 RAZ090000890 Elbow 90° 88.9mm RAX090001080 RAZ090001080 Elbow 90° 108mm RAX092000150 RAZ092000150 Elbow 90 with Plain End 15mm RAX092000180 RAZ092000180 Elbow 90 with Plain End 18mm RAX092000220 RAZ092000220 Elbow 90 with Plain End 22mm RAX092000280 RAZ092000280 Elbow 90 with Plain End 28mm RAX092000350 RAZ092000350 Elbow 90 with Plain End 35mm RAX092000420 RAZ092000420 Elbow 90 with Plain End 42mm RAX092000540 RAZ092000540 Elbow 90 with Plain End 54mm RAX092000760 RAZ092000760 Elbow 90 with Plain End 76.1mm RAX092000890 RAZ092000890 Elbow 90 with Plain End 88.9mm RAX092001080 RAZ092001080 Elbow 90 with Plain End 108mm RAX120000150 RAZ120000150 Elbow 45° 15mm RAX120000180 RAZ120000180 Elbow 45° 18mm RAX120000220 RAZ120000220 Elbow 45° 22mm RAX120000280 RAZ120000280 Elbow 45° 28mm RAX120000350 RAZ120000350 Elbow 45° 35mm RAX120000420 RAZ120000420 Elbow 45° 42mm RAX120000540 RAZ120000540 Elbow 45° 54mm RAX120000760 RAZ120000760 Elbow 45° 76.1mm RAX120000890 RAZ120000890 Elbow 45° 88.9mm RAX120001080 RAZ120001080 Elbow 45° 108mm RAX121000150 RAZ121000150 Elbow 45° with Plain End 15mm RAX121000180 RAZ121000180 Elbow 45° with Plain End 18mm RAX121000220 RAZ121000220 Elbow 45° with Plain End 22mm RAX121000280 RAZ121000280 Elbow 45° with Plain End 28mm RAX121000350 RAZ121000350 Elbow 45° with Plain End 35mm RAX121000420 RAZ121000420 Elbow 45° with Plain End 42mm RAX121000540 RAZ121000540 Elbow 45° with Plain End 54mm RAX121000760 RAZ121000760 Elbow 45° with Plain End 76.1mm RAX121000890 RAZ121000890 Elbow 45° with Plain End 88.9mm RAX121001080 RAZ121001080 Elbow 45° with Plain End 108mm RAX262005150 RAZ262005150 Elbow 90 with Female Threaded End 15×Rp1/2 RAX262005180 RAZ262005180 Elbow 90 with Female Threaded End 18×Rp1/2 RAX262007220 RAZ262007220 Elbow 90 with Female Threaded End 22×Rp3/4 RAX262010280 RAZ262010280 Elbow 90 with Female Threaded End 28×Rp1 RAX262012350 RAZ262012350 Elbow 90 with Female Threaded End 35×Rp1-1/4 RAX262012420 RAZ262012420 Elbow 90 with Female Threaded End 42×Rp1-1/2 RAX262020540 RAZ262020540 Elbow 90 with Female Threaded End 54×Rp2 RAX261005150 RAZ261005150 Elbow 90 with Male Threaded End 15×R1/2 RAX261005180 RAZ261005180 Elbow 90 with Male Threaded End 18×R1/2 RAX261005220 RAZ261005220 Elbow 90 with Male Threaded End 22×R1/2 RAX261007220 RAZ261007220 Elbow 90 with Male Threaded End 22×R3/4 RAX261010280 RAZ261010280 Elbow 90 with Male Threaded End 28×R1 RAX261012350 RAZ261012350 Elbow 90 with Male Threaded End 35×R1-1/4 RAX261015420 RAZ261015420 Elbow 90 with Male Threaded End 42×R1-1/2 RAX261020540 RAZ261020540 Elbow 90 with Male Threaded End 54×R2 RAX26305120 RAZ26305120 Elbow 90 with Female Threaded End with Wall Plate 15×Rp1/2 RAX26307180 RAZ26307180 Elbow 90 with Female Threaded End with Wall Plate 18×Rp3/4 RAX26307220 RAZ26307220 Elbow 90 with Female Threaded End with Wall Plate 22×Rp3/4 RAX26310280 RAZ26310280 Elbow 90 with Female Threaded End with Wall Plate 28×Rp1 RAX130000150 RAZ130000150 Equal Tee 15mm RAX130000180 RAZ130000180 Equal Tee 18mm RAX130000220 RAZ130000220 Equal Tee 22mm RAX130000280 RAZ130000280 Equal Tee 28mm RAX130000350 RAZ130000350 Equal Tee 35mm RAX130000420 RAZ130000420 Equal Tee 42mm RAX130000540 RAZ130000540 Equal Tee 54mm RAX130000760 RAZ130000760 Equal Tee 76.1mm RAX130000890 RAZ130000890 Equal Tee 88.9mm RAX130001080 RAZ130001080 Equal Tee 108mm RAX131015180 RAZ131015180 Reducer Tee 18×15mm RAX131015220 RAZ131015220 Reducer Tee 22×15mm RAX131018220 RAZ131018220 Reducer Tee 22×18mm RAX131015280 RAZ131015280 Reducer Tee 28×15mm RAX131018280 RAZ131018280 Reducer Tee 28×18mm RAX131022280 RAZ131022280 Reducer Tee 28×22mm RAX131015350 RAZ131015350 Reducer Tee 35×15mm RAX131018350 RAZ131018350 Reducer Tee 35×18mm RAX131022350 RAZ131022350 Reducer Tee 35×22mm RAX131028350 RAZ131028350 Reducer Tee 35×28mm RAX131015420 RAZ131015420 Reducer Tee 42×15mm RAX131018420 RAZ131018420 Reducer Tee 42×18mm RAX131022420 RAZ131022420 Reducer Tee 42×22mm RAX131028420 RAZ131028420 Reducer Tee 42×28mm RAX131035420 RAZ131035420 Reducer Tee 42×35mm RAX131015540 RAZ131015540 Reducer Tee 54×15mm RAX131018540 RAZ131018540 Reducer Tee 54×18mm RAX131022540 RAZ131022540 Reducer Tee 54×22mm RAX131028540 RAZ131028540 Reducer Tee 54×28mm RAX131035540 RAZ131035540 Reducer Tee 54×35mm RAX131042540 RAZ131042540 Reducer Tee 54×42mm RAX131035760 RAZ131035760 Reducer Tee 76.1×35mm RAX131042760 RAZ131042760 Reducer Tee 76.1×42mm RAX131054760 RAZ131054760 Reducer Tee 76.1×54mm RAX131054890 RAZ131054890 Reducer Tee 88.9×54mm RAX131076890 RAZ131076890 Reducer Tee 88.9×76.1mm RAX131054108 RAZ131054108 Reducer Tee 108×54mm RAX131076108 RAZ131076108 Reducer Tee 108×76.1mm RAX131089108 RAZ131089108 Reducer Tee 108×88.9mm RAX130F05150 RAZ130F05150 Tee with Female Threaded Branch 15×Rp1/2 RAX130F05180 RAZ130F05180 Tee with Female Threaded Branch 18×Rp1/2 RAX130F05220 RAZ130F05220 Tee with Female Threaded Branch 22×Rp1/2 RAX130F07220 RAZ130F07220 Tee with Female Threaded Branch 22×Rp3/4 RAX130F05280 RAZ130F05280 Tee with Female Threaded Branch 28×Rp1/2 RAX130F07280 RAZ130F07280 Tee with Female Threaded Branch 28×Rp3/4 RAX130F10280 RAZ130F10280 Tee with Female Threaded Branch 28×Rp1 RAX130F05350 RAZ130F05350 Tee with Female Threaded Branch 35×Rp1/2 RAX130F07350 RAZ130F07350 Tee with Female Threaded Branch 35×Rp3/4 RAX130F12350 RAZ130F12350 Tee with Female Threaded Branch 35×Rp1-1/4 RAX130F05420 RAZ130F05420 Tee with Female Threaded Branch 42×Rp1/2 RAX130F07420 RAZ130F07420 Tee with Female Threaded Branch 42×Rp3/4 RAX130F15420 RAZ130F15420 Tee with Female Threaded Branch 42×Rp1-1/2 RAX130F05540 RAZ130F05540 Tee with Female Threaded Branch 54×Rp1/2 RAX130F07540 RAZ130F07540 Tee with Female Threaded Branch 54×Rp3/4 RAX130F20540 RAZ130F20540 Tee with Female Threaded Branch 54×Rp2 RAX130F07760 RAZ130F07760 Tee with Female Threaded Branch 76.1×Rp3/4 RAX130F20760 RAZ130F20760 Tee with Female Threaded Branch 76.1×Rp2 RAX130F07890 RAZ130F07890 Tee with Female Threaded Branch 88.9×Rp3/4 RAX130F20890 RAZ130F20890 Tee with Female Threaded Branch 88.9×Rp2 RAX130F20108 RAZ130F20108 Tee with Female Threaded Branch 108×Rp2 RAX290000150 RAZ290000150 Cap 15mm RAX290000180 RAZ290000180 Cap 18mm RAX290000220 RAZ290000220 Cap 22mm RAX290000280 RAZ290000280 Cap 28mm RAX290000350 RAZ290000350 Cap 35mm RAX290000420 RAZ290000420 Cap 42mm RAX290000540 RAZ290000540 Cap 54mm RAX290000760 RAZ290000760 Cap 76.1mm RAX290000890 RAZ290000890 Cap 88.9mm RAX290001080 RAZ290001080 Cap 108mm RAX227000220 RAZ227000220 Flange Adapter 22mm RAX227000280 RAZ227000280 Flange Adapter 28mm RAX227000350 RAZ227000350 Flange Adapter 35mm RAX227000420 RAZ227000420 Flange Adapter 42mm RAX227000540 RAZ227000540 Flange Adapter 54mm RAX227000760 RAZ227000760 Flange Adapter 76.1mm RAX227000890 RAZ227000890 Flange Adapter 88.9mm RAX227001080 RAZ227001080 Flange Adapter 108mm RAX341005150 RAZ341005150 Male Straight Connector with Union Nut 15×R1/2 RAX341007220 RAZ341007220 Male Straight Connector with Union Nut 22×R3/4 RAX341010280 RAZ341010280 Male Straight Connector with Union Nut 28×R1 RAX341012350 RAZ341012350 Male Straight Connector with Union Nut 35×R1-1/4 RAX341015420 RAZ341015420 Male Straight Connector with Union Nut 42×R1-1/2 RAX341020540 RAZ341020540 Male Straight Connector with Union Nut 54×R2 RAX340005150 RAZ340005150 Female Straight Connector with Union Nut 15×Rp1/2 RAX340007180 RAZ340007180 Female Straight Connector with Union Nut 18×Rp3/4 RAX340007220 RAZ340007220 Female Straight Connector with Union Nut 22×Rp3/4 RAX340010280 RAZ340010280 Female Straight Connector with Union Nut 28×Rp1 RAX340012350 RAZ340012350 Female Straight Connector with Union Nut 35×Rp1-1/4 RAX340015420 RAZ340015420 Female Straight Connector with Union Nut 42×Rp1-1/2 RAX340020540 RAZ340020540 Female Straight Connector with Union Nut 54×Rp2

Approval Holder:

Assotherm SRL

Company Name

Assotherm SRL

Address

VIA F.LLI CALVI 7-24060 CASAZZA

Country

Italy

View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm 3/8” – 2”

Marking:

YP (Yorkshire Pegler Logo) & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

YP21 YP62 YP63 YP23 YP22 YP12 YP12S YP24 YP1R YP6 YP1 YP1SLIP YP1IM YP61 YP25/YP26/YP27/YP28 . All fittings are for use with copper pipe to EN 1057.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Flomasta & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

SR5270 - Straight coupler: 8mm，10mm，12mm，14mm，15mm，16mm， 18mm，20mm，22mm，28mm，35mm，42mm， 54mm. SR5090 - 90o elbow: 8mm，10mm，12mm，14mm，15mm，16mm， 18mm，20mm，22mm，28mm，35mm，42mm， 54mm. SR5092 - 90o street elbow: 8mm，10mm，12mm，14mm，15mm，16mm， 18mm，20mm，22mm，28mm，35mm，42mm, 54mm. SR5301 - Stop end: 8mm，10mm，12mm，14mm，15mm，16mm， 18mm，20mm，22mm，28mm，35mm，42mm， 54mm. SR5240 - Reducing coupler: 10mm x 8mm， 15mm x 8mm， 15mm x 10mm， 15mm x 12mm，22mm x 15mm，28mm x 15mm， 28mm x 22mm，35mm x 15mm，35mm x 22mm， 35mm x 28mm，42mm x 15mm，42mm x 22mm， 42mm x 28mm，42mm x 35mm，54mm x 15mm， 54mm x 22mm，54mm x 28mm，54mm x 35mm， 54mm x 42mm. SR5243 - Fitting reducer: 10mm x 8mm, 12mm x 8mm, 15mm x 8mm， 15mm x 10mm，15mm x 12mm，22mm x 15mm， 28mm x 15mm，28mm x 22mm，35mm x 15mm， 35mm x 22mm，35mm x 28mm，42mm x 15mm， 42mm x 22mm，42mm x 28mm，42mm x 35mm， 54mm x 15mm，54mm x 22mm，54mm x 28mm， 54mm x 35mm，54mm x 42mm. SR5040 - 45o Street elbow: 12mm，15mm，18mm，22mm，28mm，35mm， 42mm，54mm. SR5041 - 45o elbow: 12mm，15mm，18mm，22mm，28mm，35mm， 42mm，54mm. SR5062 - Straight tap connector: 12mm x 3/8"，12mm x 1/2"，15mm x 1/2"， 15mm x 3/4"，22mm x 1/2"，22mm x 3/4"， 22mm x 1"，28mm x 3/4"，28mm x 1"， 28mm x 1 1/4"，35mm x 1 1/2"，42mm x 1 1/2"， 42mm x 2"，54mm x 2". SR5063 - Bent tap connector: 15mm x 1/2"，15mm x 3/4"，22mm x 3/4"， 22mm x 1"，28mm x 1". SR5271 - Metric/Imperial Coupler: 15mm x 1/2"，22mm x 3/4"，28mm x 1"， 35mm x 1 1/4". SR5085 - Full cross over: 12mm，14mm，15mm，16mm，18mm，22mm. SR5086 - Part cross over: 12mm，14mm，15mm，16mm，18mm，22mm. SR5270S - Coupler without stop: 8mm，10mm，12mm，15mm，22mm，28mm， 35mm，42mm，54mm. SR5130 - Equal Tee: 8mm，10mm，12mm，15mm，22mm，28mm， 35mm，42mm，54mm. SR5130R - Reducing Tee: 15mm x 15mm x 10mm，15mm x 15mm x 22mm， 22mm x 22mm x 15mm，28mm x 28mm x 15mm， 28mm x 28mm x 22mm，35mm x 35mm x 15mm， 35mm x 35mm x 22mm，35mm x 35mm x 28mm， 42mm x 42mm x 15mm，42mm x 42mm x 22mm， 42mm x 42mm x 28mm，42mm x 42mm x 35mm， 54mm x 54mm x 15mm，54mm x 54mm x 22mm， 54mm x 54mm x 28mm，54mm x 54mm x 35mm， 54mm x 54mm x 42mm. SR5131R - Reducing tee: 22mm x 15mm x 15mm，22mm x 15mm x 22mm， 28mm x 15mm x 22mm，28mm x 22mm x 15mm， 28mm x 22mm x 22mm，28mm x 22mm x 28mm， 35mm x 15mm x 35mm，35mm x 22mm x 22mm， 35mm x 22mm x 35mm，35mm x 28mm x 35mm， 42mm x 28mm x 42mm.

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

1 Paddington Square, London

Postcode

W2 1GG

View All Listings by this Company

Supreme range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310410

Size:

see model

Marking:

SAB, made in Italy, size and PN on fitting nut.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

IR3212 Compression Reducing Tee 25mm x 20mm x 25mm IR3213 Compression Reducing Tee 32mm x 25mm x 32mm IR3214 Compression Reducing Tee 40mm x 32mm x 40mm IR3215 Compression Reducing Tee 50mm x 40mm x 50mm IR3216 Compression Reducing Tee 63mm x 50mm x 63mm IR3217 Compression Reducing Tee 75mm x 63mm x 75mm IR3218 Compression Reducing Tee 90mm x 75mm x 90mm IR3219 Compression Reducing Tee 110mm x 90mm x 110mm IR3141 Compression Tee 20mm x 20mm x 20mm IR3142 Compression Tee 25mm x 25mm x 25mm IR3143 Compression Tee 32mm x 32mm x 32mm IR3144 Compression Tee 40mm x 40mm x 40mm IR3145 Compression Tee 50mm x 50mm x 50mm IR3146 Compression Tee 63mm x 63mm x 63mm IR3147 Compression Tee 75mm x 75mm x 75mm IR3148 Compression Tee 90mm x 90mm x 90mm IR3149 Compression Tee 110mm x 110mm x 110mm IR3182 Compression Tee with Female Thread 20mm x 1/2" x 20mm IR3183 Compression Tee with Female Thread 20mm x 3/4" x 20mm IR3184 Compression Tee with Female Thread 25mm x 1/2" x 25mm IR3185 Compression Tee with Female Thread 25mm x 3/4" x 25mm IR3186 Compression Tee with Female Thread 25mm x 1" x 25mm IR3187 Compression Tee with Female Thread 32mm x 1/2" x 32mm IR3188 Compression Tee with Female Thread 32mm x 3/4" x 32mm IR3189 Compression Tee with Female Thread 32mm x 1" x 32mm IR3191 Compression Tee with Female Thread 40mm x 1" x 40mm IR3192 Compression Tee with Female Thread 40mm x 1 1/4" x 40mm IR3193 Compression Tee with Female Thread 40mm x 1 1/2" x 40mm IR3194 Compression Tee with Female Thread 50mm x 1 1/2" x 50mm IR3195 Compression Tee with Female Thread 50mm x 2" x 50mm IR3196 Compression Tee with Female Thread 63mm x 2" x 63mm IR3198 Compression Tee with Female Thread 75mm x 2" x 75mm IR3200 Compression Tee with Female Thread 90mm x 3" x 90mm IR3201 Compression Tee with Female Thread 10mm x 4" x 10mm IR3157 Compression Tee with Male Thread 20mm x 1/2" x 20mm IR3158 Compression Tee with Male Thread 20mm x 3/4" x 20mm IR3159 Compression Tee with Male Thread 25mm x 1/2" x 25mm IR3160 Compression Tee with Male Thread 25mm x 3/4" x 25mm IR3161 Compression Tee with Male Thread 25mm x 1" x 25mm IR3162 Compression Tee with Male Thread 32mm x 1/2" x 32mm IR3163 Compression Tee with Male Thread 32mm x 3/4" x 32mm IR3164 Compression Tee with Male Thread 32mm x 1" x 32mm IR3166 Compression Tee with Male Thread 40mm x 1" x 40mm IR3167 Compression Tee with Male Thread 40mm x 1 1/4" x 40mm IR3168 Compression Tee with Male Thread 40mm x 1 1/2" x 40mm IR3169 Compression Tee with Male Thread 50mm x 1 1/2" x 50mm IR3170 Compression Tee with Male Thread 50mm x 2" x 50mm IR3171 Compression Tee with Male Thread 63mm x 2" x 63mm IR3172 Compression Tee with Male Thread 75mm x 2" x 75mm IR3173 Compression Tee with Male Thread 90mm x 3" x 90mm IR3174 Compression Tee with Male Thread 10mm x 4" x 10mm IR3227 Compression Adaptor with Male Thread 20mm x 1/2" IR3228 Compression Adaptor with Male Thread 20mm x 3/4" IR3230 Compression Adaptor with Male Thread 25mm x 1/2" IR3231 Compression Adaptor with Male Thread 25mm x 3/4" IR3232 Compression Adaptor with Male Thread 25mm x 1" IR3233 Compression Adaptor with Male Thread 32mm x 1/2" IR3234 Compression Adaptor with Male Thread 32mm x 3/4" IR3235 Compression Adaptor with Male Thread 32mm x 1" IR3236 Compression Adaptor with Male Thread 32mm x 1 1/4" IR3237 Compression Adaptor with Male Thread 32mm x 1 1/2" IR3238 Compression Adaptor with Male Thread 40mm x 1" IR3239 Compression Adaptor with Male Thread 40mm x 1 1/4" IR3240 Compression Adaptor with Male Thread 40mm x 1 1/2" IR3241 Compression Adaptor with Male Thread 40mm x 2" IR3243 Compression Adaptor with Male Thread 50mm x 1 1/4" IR3244 Compression Adaptor with Male Thread 50mm x 1 1/2" IR3245 Compression Adaptor with Male Thread 50mm x 2" IR3246 Compression Adaptor with Male Thread 63mm x 1 1/2" IR3247 Compression Adaptor with Male Thread 63mm x 2" IR3249 Compression Adaptor with Male Thread 75mm x 2" IR3251 Compression Adaptor with Male Thread 75mm x 3" IR3252 Compression Adaptor with Male Thread 90mm x 2" IR3254 Compression Adaptor with Male Thread 90mm x 3" IR3255 Compression Adaptor with Male Thread 90mm x 4" IR3256 Compression Adaptor with Male Thread 10mm x 2" IR3257 Compression Adaptor with Male Thread 10mm x 3" IR3258 Compression Adaptor with Male Thread 10mm x 4" IR3262 Compression Adaptor with Female Thread 20mm x 1/2" IR3263 Compression Adaptor with Female Thread 20mm x 3/4" IR3264 Compression Adaptor with Female Thread 25mm x 1/2" IR3265 Compression Adaptor with Female Thread 25mm x 3/4" IR3266 Compression Adaptor with Female Thread 25mm x 1" IR3267 Compression Adaptor with Female Thread 32mm x 1/2" IR3268 Compression Adaptor with Female Thread 32mm x 3/4" IR3269 Compression Adaptor with Female Thread 32mm x 1" IR3270 Compression Adaptor with Female Thread 32mm x 1 1/4" IR3272 Compression Adaptor with Female Thread 40mm x 1" IR3273 Compression Adaptor with Female Thread 40mm x 1 1/4" IR3274 Compression Adaptor with Female Thread 40mm x 1 1/2" IR3275 Compression Adaptor with Female Thread 50mm x 1 1/4" IR3276 Compression Adaptor with Female Thread 50mm x 1 1/2" IR3277 Compression Adaptor with Female Thread 50mm x 2" IR3278 Compression Adaptor with Female Thread 63mm x 1 1/2" IR3279 Compression Adaptor with Female Thread 63mm x 2" IR3281 Compression Adaptor with Female Thread 75mm x 2" IR3283 Compression Adaptor with Female Thread 75mm x 3" IR3284 Compression Adaptor with Female Thread 90mm x 2" IR3286 Compression Adaptor with Female Thread 90mm x 3" IR3287 Compression Adaptor with Female Thread 10mm x 3" IR3288 Compression Adaptor with Female Thread 10mm x 4" IR3046 Compression Coupler/Joiner 20mm IR3047 Compression Coupler/Joiner 25mm IR3048 Compression Coupler/Joiner 32mm IR3049 Compression Coupler/Joiner 40mm IR3050 Compression Coupler/Joiner 50mm IR3051 Compression Coupler/Joiner 63mm IR3052 Compression Coupler/Joiner 75mm IR3053 Compression Coupler/Joiner 90mm IR3054 Compression Coupler/Joiner 110mm IR3055 Compression Repair Coupling 50mm IR3056 Compression Repair Coupling 63mm IR3057 Compression Repair Coupling 75mm IR3058 Compression Repair Coupling 90mm IR3059 Compression Repair Coupling 110mm IR3062 Compression Reducing Coupler/Joiner 25mm x 20mm IR3063 Compression Reducing Coupler/Joiner 32mm x 20mm IR3064 Compression Reducing Coupler/Joiner 32mm x 25mm IR3065 Compression Reducing Coupler/Joiner 40mm x 25mm IR3066 Compression Reducing Coupler/Joiner 40mm x 32mm IR3068 Compression Reducing Coupler/Joiner 50mm x 32mm IR3069 Compression Reducing Coupler/Joiner 50mm x 40mm IR3070 Compression Reducing Coupler/Joiner 63mm x 32mm IR3071 Compression Reducing Coupler/Joiner 63mm x 40mm IR3072 Compression Reducing Coupler/Joiner 63mm x 50mm IR3073 Compression Reducing Coupler/Joiner 75mm x 63mm IR3074 Compression Reducing Coupler/Joiner 90mm x 63mm IR3075 Compression Reducing Coupler/Joiner 90mm x 75mm IR3076 Compression Reducing Coupler/Joiner 110mm x 90mm IR3291 Compression End Cap 20mm IR3292 Compression End Cap 25mm IR3293 Compression End Cap 32mm IR3294 Compression End Cap 40mm IR3295 Compression End Cap 50mm IR3296 Compression End Cap 63mm IR3297 Compression End Cap 75mm IR3298 Compression End Cap 90mm IR3299 Compression End Cap 110mm IR3081 Compression Elbow 20mm IR3082 Compression Elbow 25mm IR3083 Compression Elbow 32mm IR3084 Compression Elbow 40mm IR3085 Compression Elbow 50mm IR3086 Compression Elbow 63mm IR3087 Compression Elbow 75mm IR3088 Compression Elbow 90mm IR3089 Compression Elbow 110mm IR3120 Compression Elbow with Female Thread 20mm x 1/2" IR3121 Compression Elbow with Female Thread 20mm x 3/4" IR3122 Compression Elbow with Female Thread 25mm x 1/2" IR3123 Compression Elbow with Female Thread 25mm x 3/4" IR3124 Compression Elbow with Female Thread 25mm x 1" IR3125 Compression Elbow with Female Thread 32mm x 1/2" IR3126 Compression Elbow with Female Thread 32mm x 3/4" IR3127 Compression Elbow with Female Thread 32mm x 1" IR3128 Compression Elbow with Female Thread 32mm x 1 1/4" IR3130 Compression Elbow with Female Thread 40mm x 1 1/4" IR3131 Compression Elbow with Female Thread 40mm x 1 1/2" IR3132 Compression Elbow with Female Thread 50mm x 1 1/2" IR3133 Compression Elbow with Female Thread 50mm x 2" IR3134 Compression Elbow with Female Thread 63mm x 2" IR3136 Compression Elbow with Female Thread 75mm x 2 1/2" IR3137 Compression Elbow with Female Thread 90mm x 3" IR3138 Compression Elbow with Female Thread 110mm x 4" IR3096 Compression Elbow with Male Thread 20mm x 1/2" IR3097 Compression Elbow with Male Thread 20mm x 3/4" IR3098 Compression Elbow with Male Thread 25mm x 1/2" IR3099 Compression Elbow with Male Thread 25mm x 3/4" IR3100 Compression Elbow with Male Thread 25mm x 1" IR3101 Compression Elbow with Male Thread 32mm x 3/4" IR3102 Compression Elbow with Male Thread 32mm x 1" IR3103 Compression Elbow with Male Thread 32mm x 1 1/4" IR3104 Compression Elbow with Male Thread 40mm x 1 1/4" IR3105 Compression Elbow with Male Thread 40mm x 1 1/2" IR3106 Compression Elbow with Male Thread 50mm x 1 1/2" IR3107 Compression Elbow with Male Thread 50mm x 2" IR3108 Compression Elbow with Male Thread 63mm x 2" IR3109 Compression Elbow with Male Thread 75mm x 3" IR3113 Compression Elbow with Male Thread 90mm x 3" IR3114 Compression Elbow with Male Thread 110mm x 4" IR3952 Compression Flanged Coupling 50mm x 2" (DN50) IR3953 Compression Flanged Coupling 63mm x 2" (DN50) IR3954 Compression Flanged Coupling 75mm x 2" (DN65) IR3955 Compression Flanged Coupling 90mm x 3" (DN80) IR3957 Compression Flanged Coupling 90mm x 4" (DN100) IR3958 Compression Flanged Coupling 50mm x 2" (DN100)

Approval Holder:

PLANTEX UK

Company Name

PLANTEX UK

Address

Howlett’s Barn, Woolton Barn, Bekesbourne Lane, Canterbury, Kent

Postcode

CT16 3PU

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Manufacturer:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Range of stainless steel (SS316L) pressfit fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207398

Size:

15-108mm. ½” BSP (M) or (F) - 4” BSP (M) or (F) (see model - some incorporate a captive nut).

Marking:

Brymec and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Coupler OD15 29439 OD22 29440 OD28 29441 OD35 29442 OD42 29443 OD54 29444 OD76.1 29445 OD88.9 29446 OD108 29447 Slip coupling OD15 29448 OD22 29449 OD28 29450 OD35 29451 OD42 29452 OD54 29453 OD76.1 29454 OD88.9 29455 OD108 29456 Fitting Reducer OD22xOD15 29459 OD28xOD15 29460 OD28xOD22 29461 OD35xOD22 29462 OD35xOD28 29463 OD42xOD22 29464 OD42xOD28 29465 OD42xOD35 29466 OD54xOD28 29467 OD54xOD35, 29468 OD54xOD42 29469 OD76.1xOD54 29470 OD88.9xOD54 29471 OD88.9xOD76.1 29472 OD108xOD54 29473 OD108xOD76.1 29474 OD108xOD88.9 29475 F x F 90° Bend OD15 29317 OD22 29318 OD28 29319 OD35 29320 OD42 29321 OD54 29322 OD76.1 29323 OD88.9 23924 OD108 29325 M x F 90° Bend OD15 29308 OD22 29309 OD28 29310 OD35 29311 OD42 29312 OD54 29313 OD76.1 29314 OD88.9 29315 OD108 29316 F X F 45° Bend OD15 29346 OD22 29347 OD28 29348 OD35 29349 OD42 29350 OD54 23951 OD76.1 29353 OD88.9 29354 OD108 29355 M x F 45° Bend OD15 29336 OD22 29337 OD28 29338 OD35 29339 OD42 29340 OD54 29341 OD76.1 29343 OD88.9 29344 OD108 29345 Full Crossover OD15 29356 OD22 29357 OD28 29358 Equal Tee OD15 29376 OD22 29377 OD28 29378 OD35 29379 OD42 29380 OD54 29381 OD76.1 29382 OD88.9 29383 OD108 29384 Reducing Tee OD22xOD15 29385 OD22xOD15 29386 OD28xOD15 29387 OD28xOD22 29389 OD35xOD15 29390 OD35xOD22 29391 OD35xOD28 29392 OD42xOD22 29393 OD42xOD28 29394 OD42xOD35 29395 OD54xOD22 29396 OD54xOD28 29397 OD54xOD35 29398 OD54xOD42 29399 OD76.1xOD22 29400 OD76.1xOD28 29401 OD76.1xOD35 29402 OD76.1xOD42 29403 OD76.1xOD54 29404 OD88.9xOD22 29405 OD88.9xOD28 29406 OD88.9xOD35 29407 OD88.9xOD42 29408 OD88.9xOD54 29409 D88.9xOD76.1 29410 OD108xOD22 29411 OD108xOD28 29412 OD108xOD35 29413 OD108xOD42 29414 OD108xOD54 29415 OD108xOD76.1 29416 OD108xOD88.9 29417 Female Branch Tee OD15xRp 1/2 29418 OD22xRp 1/2 29419 OD22xRp 3/4 29420 OD28xRp 3/4 29421 OD28xRp 1/2 29422 OD28xRp 1 29423 OD35xRp 1/2 29424 OD35xRp 3/4 29425 OD35xRp1 1/4 29426 OD42xRp 1/2 29427 OD42xRp 3/4 29428 OD42xRp1 1/2 29429 OD54xRp 1/2 29430 OD54xRp 3/4 29431 OD54xRp 2 29432 OD76.1xRp 3/4 29433 OD76.1xRp 2 29434 OD88.9xRp 3/4 29435 OD88.9xRp 2 29436 OD108xRp 3/4 29437 OD108xRp 2 29438 Male 90° Elbow OD15xR 1/2 29370 OD22xR 3/4 29371 OD28xR 1 29372 OD35xR 1 1/4 29373 OD42xR 1 1/2 29374 OD54xR 2 29375 Female 90° Elbow OD15xRp 1/2 29362 OD22xRp 3/4 29363 OD28xRp 1 29366 OD35xRp 1 ¼ 29369 Female Backplate Elbow OD15xRp 1/2 29531 OD22xRp 3/4 29532 Male Adaptor OD15xR 1/2 29477 OD15xR 3/4 29478 OD22xR 1/2 29479 OD22xR 3/4 29480 OD22xR 1 29481 OD28xR 3/4 29482 OD28xR 1 29483 OD35xR1 29484 OD35xR 1 1/4 29485 OD42xR 1 1/2 29486 OD54xR 2 29487 OD76.1xR 2 1/2 29488 OD88.9xR 3 29489 OD108xR4 29490 Female Adaptor OD15xRp 1/2 29491 OD15xRp 3/4 29492 OD22xRp 1/2 29493 OD22xRp 3/4 29494 OD22xRp 1 29495 OD28xRp 3/4 29496 OD28xRp 1 29497 OD35xRp 1 1/4 29498 OD42xRp 1 1/2 29499 OD54xRp 2 29500 Plug-In Male Adaptor OD15xR1/2 29259 OD22xR 1/2 29260 OD22xR 3/4 29261 OD28xR 1 29262 Plug-In Female Adaptor OD15xRp 1/2 29245 OD22xRp 1/2 29245 OD22xRp 3/4 29247 OD28xR 3/4 29248 End Cap OD15 29533 OD22 29534 OD28 29535 OD35 29536 OD42 29537 OD54 29538 Male Union Flat Sealing OD15xR 1/2 29523 OD15xR 3/4 29524 OD22xR 3/4 29525 OD28xR 1 29526 OD35xR 1 1/4 29527 OD42xR 1 1/2 29528 OD54xR 2 29529 Female Union Flat Sealing OD15xRp 1/2 29514 OD15xRp 3/4 29515 OD22xRp 3/4 29516 OD22xRp 1 29517 OD28xRp 1 29519 OD35xRp 1 1/4 29520 OD42xRp 1 1/2 29521 OD54xRp 2 29522 Union Flat Sealing OD15 29508 OD22 29509 OD28 29510 OD35 29511 OD42 29512 OD54 29513

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902084

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Brymec and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

27800 15mm Copper-Press 90° M/F Bend 27801 22mm Copper-Press 90° M/F Bend 27802 28mm Copper-Press 90° M/F Bend 27803 35mm Copper-Press 90° M/F Bend 27804 42mm Copper-Press 90° M/F Bend 27805 54mm Copper-Press 90° M/F Bend 27806 67mm Copper-Press 90° M/F Bend 27807 76mm Copper-Press 90° M/F Bend 27809 108mm Copper-Press 90° M/F Bend 27810 15mm Copper-Press 90° F/F Bend 27811 22mm Copper-Press 90° F/F Bend 27812 28mm Copper-Press 90° F/F Bend 27813 35mm Copper-Press 90° F/F Bend 27814 42mm Copper-Press 90° F/F Bend 27815 54mm Copper-Press 90° F/F Bend 27816 67mm Copper-Press 90° F/F Bend 27817 76mm Copper-Press 90° F/F Bend 27819 108mm Copper-Press 90° F/F Bend 27820 15mm Copper-Press 45° M/F Bend 27821 22mm Copper-Press 45° M/F Bend 27822 28mm Copper-Press 45° M/F Bend 27823 35mm Copper-Press 45° M/F Bend 27824 42mm Copper-Press 45° M/F Bend 27825 54mm Copper-Press 45° M/F Bend 27826 67mm Copper-Press 45° M/F Bend 27827 76mm Copper-Press 45° M/F Bend 27829 109mm Copper-Press 45° M/F Bend 27830 15mm Copper-Press 45° F/F Bend 27831 22mm Copper-Press 45° F/F Bend 27832 28mm Copper-Press 45° F/F Bend 27833 65mm Copper-Press 45° F/F Bend 27834 42mm Copper-Press 45° F/F Bend 27835 54mm Copper-Press 45° F/F Bend 27836 67mm Copper-Press 45° F/F Bend 27837 76mm Copper-Press 45° F/F Bend 27839 108mm Copper-Press 45° F/F Bend 27840 15mm Copper-Press Full Crossover 27841 22mm Copper-Press Full Crossover 27845 15mm Copper-Press Partial Crossover 27846 22mm Copper-Press Partial Crossover 27850 15mm Copper-Press Equal Tee 27851 22mm Copper-Press Equal Tee 27852 28mm Copper-Press Equal Tee 27853 35mm Copper-Press Equal Tee 27854 42mm Copper-Press Equal Tee 27855 54mm Copper-Press Equal Tee 27856 67mm Copper-Press Equal Tee 27857 76mm Copper-Press Equal Tee 27859 108mm Copper-Press Equal Tee 27860 15 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27861 22 x 15 x 15mm Copper-Press Reducing Tee ExBxE 27862 22 x 15 x 22 mm Copper-Press Reducing Tee ExBxE 27863 22 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27865 28 x 15 x 22mm Copper-Press Reducing Tee ExBxE 27866 28 x 15 x 28mm Copper-Press Reducing Tee ExBxE 27867 28 x 22 x 22mm Copper-Press Reducing Tee ExBxE 27868 28 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27869 28 x 28 x 15mm Copper-Press Reducing Tee ExBxE 27870 28 x 28 x 22mm Copper-Press Reducing Tee ExBxE 27872 35 x 15 x 35mm Copper-Press Reducing Tee ExBxE 27874 35 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27875 35 x 22 x 35mm Copper-Press Reducing Tee ExBxE 27876 35 x 28 x 28mm Copper-Press Reducing Tee ExBxE 27877 35 x 28 x 35mm Copper-Press Reducing Tee ExBxE 27880 42 x 15 x 42mm Copper-Press Reducing Tee ExBxE 27881 42 x 22 x 42mm Copper-Press Reducing Tee ExBxE 27882 42 x 28 x 42mm Copper-Press Reducing Tee ExBxE 27884 42 x 35 x 42mm Copper-Press Reducing Tee ExBxE 27885 54 x 22 x 54mm Copper-Press Reducing Tee ExBxE 27886 54 x 28 x 54mm Copper-Press Reducing Tee ExBxE 27887 54 x 35 x 54mm Copper-Press Reducing Tee ExBxE 27888 54 x 42 x 54mm Copper-Press Reducing Tee ExBxE 27889 67 x 54 x 67mm Copper-Press Reducing Tee ExBxE 27890 76 x 54 x 76mm Copper-Press Reducing Tee ExBxE 27893 108 x 54 x 108mm Copper-Press Reducing Tee ExBxE 27896 42 x 42 x 35mm Copper-Press Reducing Tee ExBxE 27900 22 x 15mm Copper-Press Reducing Coupling 27901 28 x 15mm Copper-Press Reducing Coupling 27902 28 x 22 mm Copper-Press Reducing Coupling 27903 35 x 22mm Copper-Press Reducing Coupling 27904 35 x 28mm Copper-Press Reducing Coupling 27905 42 x 22mm Copper-Press Reducing Coupling 27906 42 x 28mm Copper-Press Reducing Coupling 27907 42 x 35mm Copper-Press Reducing Coupling 27908 54 x 28mm Copper-Press Reducing Coupling 27909 54 x 35mm Copper-Press Reducing Coupling 27910 54 x 42mm Copper-Press Reducing Coupling 27915 22 x 15mm Copper-Press Reducer 27916 28 x 15mm Copper-Press Reducer 27917 28 x 22mm Copper-Press Reducer 27918 35 x 22mm Copper-Press Reducer 27919 35 x 28mm Copper-Press Reducer 27920 42 x 22mm Copper-Press Reducer 27921 42 x 28mm Copper-Press Reducer 27922 42 x 35mm Copper-Press Reducer 27923 54 x 35mm Copper-Press Reducer 27924 54 x 42mm Copper-Press Reducer 27925 67 x 54mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 27926 76 x 54mm Copper-Press Reducer 27929 108 x54mm Copper-Press Reducer 27930 108 x76mm Copper-Press Reducer 27932 54 x 28mm Copper-Press Reducer 27940 15mm Copper-Press Coupling 27941 22mm Copper-Press Coupling 27942 28mm Copper-Press Coupling 27943 35mm Copper-Press Coupling 27944 42mm Copper-Press Coupling 27945 54mm Copper-Press Coupling 27946 67mm Copper-Press Coupling 27947 76mm Copper-Press Coupling 27949 108mm Copper-Press Coupling 27950 15mm Copper-Press Slip Coupling 27951 22mm Copper-Press Slip Coupling 27952 28mm Copper-Press Slip Coupling 27953 35mm Copper-Press Slip Coupling 27954 42mm Copper-Press Slip Coupling 27955 54mm Copper-Press Slip Coupling 27956 67mm Copper-Press Slip Coupling 27957 76mm Copper-Press Slip Coupling 27960 15mm Copper-Press End Cap 27961 22mm Copper-Press End Cap 27962 28mm Copper-Press End Cap 27963 35mm Copper-Press End Cap 27964 42mm Copper-Press End Cap 27965 54mm Copper-Press End Cap 27966 67mm Copper-Press End Cap 27967 76mm Copper-Press End Cap 28071 15mm x1/2" Copper-Press Female Iron 90° Elbow 28074 22mm x3/4" Copper-Press Female Iron 90° Elbow 28081 15mm x1/2" Copper-Press Male Iron 90° Elbow 28101 15mm x1/2" x 15mm Copper-Press Female Branch Reducing Tee 28102 22mm x1/2" x 22mm Copper-Press Female Branch Reducing Tee 28104 28mm x1/2" x 28mm Copper-Press Female Branch Reducing Tee 28106 35mm x1/2" x 35mm Copper-Press Female Branch Reducing Tee 28108 42mm x1/2" x 42mm Copper-Press Female Branch Reducing Tee 28110 54mm x1/2" x 54mm Copper-Press Female Branch Reducing Tee 28115 15mm x 3/8" Copper-Press Male Iron Adaptor 28116 15mm x 1/2" Copper-Press Male Iron Adaptor 28117 15mm x 3/4" Copper-Press Male Iron Adaptor 28118 22mm x 1/2" Copper-Press Male Iron Adaptor 28119 22mm x 3/4" Copper-Press Male Iron Adaptor 28120 22mm x 1" Copper-Press Male Iron Adaptor 28121 28mm x 3/4" Copper-Press Male Iron Adaptor 28122 28mm x 1" Copper-Press Male Iron Adaptor 28125 35mm x 1 1/4" Copper-Press Male Iron Adaptor 28128 42mm x 1 1/2" Copper-Press Male Iron Adaptor 28130 54mm x 2" Copper-Press Male Iron Adaptor 28131 67mm x 2 1/2" Copper-Press Male Iron Adaptor 28133 76mm x 3" Copper-Press Male Iron Adaptor 28134 108mm x 4" Copper-Press Male Iron Adaptor 28141 15mm x 1/2" Copper-Press Plug-In Female Adapter 28142 22mm x 1/2" Copper-Press Plug-In Female Adapter 28143 22mm x 3/4" Copper-Press Plug-In Female Adapter 28145 28mm x 1" Copper-Press Plug-In Female Adapter 28148 54mm x 2" Copper-Press Plug-In Female Adapter 28149 35mm x 1" Copper-Press Plug-In Female Adapter 28151 15mm x 1/2" Copper-Press Female Iron Adaptor 28153 22mm x 1/2" Copper-Press Female Iron Adaptor 28154 22mm x 3/4" Copper-Press Female Iron Adaptor 28157 28mm x 1" Copper-Press Female Iron Adaptor 28160 35mm x 1 1/4" Copper-Press Female Iron Adaptor 28163 42mm x 1 1/2" Copper-Press Female Iron Adaptor 28165 54mm x 2" Copper-Press Female Iron Adaptor 28166 67mm x 2 1/2" Copper-Press Female Iron Adaptor 28169 76mm x 3" Copper-Press Female Iron Adaptor 28171 15mm x 1/2" Copper-Press Plug-In Male Adapter 28173 22mm x 3/4" Copper-Press Plug-In Male Adapter 28231 67 x 28mm Copper-Press Reducer 28232 67 x 35mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 28233 67 x 42mm Copper-Press Reducer 28236 76 x 67mm Copper-Press Reducer 28237 108 x42mm Copper-Press Reducer 28238 108 x42mm Copper-Press Reducer 28255 67 x 28 x 67mm Copper-Press Reducing Tee ExBxE 28260 76 x 35 x 76mm Copper-Press Reducing Tee ExBxE 27897 54 x 22 x 54mm Extended Spigot Manifold Tee 27898 54 x 28 x 54mm Extended Spigot Manifold Tee 27911 67mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27912 76mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27913 108mm x 3/4" 4 Port Copper‐Press Multiport Coupler 28190 15mm x 1/2" Copper Press Female Union 28192 22mm x 3/4" Copper Press Female Union 28195 28mm x 1" Copper Press Female Union 28196 35mm x 1 1/4" Copper Press Female Union 28197 42mm x 1 1/2" Copper Press Female Union 28198 54mm x 2" Copper Press Female Union 28200 15mm x 1/2" Copper Press Male Union 28203 22mm x 3/4" Copper Press Male Union 28206 28mm x 1" Copper Press Male Union 28207 35mm x 1 ¼ Copper Press Male Union 28208 42mm x 1 1/2" Copper Press Male Union 28209 54mm x 2" Copper Press Male Union 28225 15mm x1/2"Copper Press Female Backplate Elbow 28241 42mm Copper Press Flange (1 1/2" / DN40) 28242 54mm Copper Press Flange (2" / DN50) 28243 67mm Copper Press Flange (2 1/2" / DN65) 28244 76mm Copper Press Flange (3”/DN 80) 28246 108mm Copper Press Flange (4" / DN100)

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of plastic, push-fit fittings (wall plate elbow, equal elbow, end stop, pipe insert, equal straight and equal tee) for use with MDPE pipe (manufactured to BS EN 12201), for above and below ground use. Copper adaptors are for use with PB pipe (manufactured to BS7291-2), PEX pipe (manufactured to BS7291-3) or Copper pipes (manufactured to BS EN 1057) and are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250302022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models

Marking:

TLC logo and size on body. Size and PN on plastic nut.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

SMDCA6726M - 20mm X 15mm. SMDCA6784M - 25mm X 22mm. SMDCA6786M - 25mm X 15mm. SMDE6722M, SMDST672M, SMTS20M, SMDU6722M & SMDT67222M - 20mm. SMDE6788M, SMDST678M, SMDU6788M, SMDT67888M & SMTS25M - 25mm. SMDWP6784M - 25mm x ½” BSP (M). SMDWP6724M - 20mm x ½” BSP (F) (Wall Plate Elbow).

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309382

Size:

See model.

Marking:

CB,W and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

635690 EF 8mm Coupler 635691 EF 10mm Coupler 635692 EF 15mm Coupler 635693 EF 22mm Coupler 635694 EF 28mm Coupler 635695 EF 35mm Coupler 635696 EF 42mm Coupler 635697 EF 54mm Coupler 635698 EF 15mm Slip Coupler 635699 EF 22mm Slip Coupler 636061 EF 35mm Slip Coupler 636062 EF 42mm Slip Coupler 636063 EF 54mm Slip Coupler 635700 EF 8mm End Cap 635701 EF 10mm End Cap 635702 EF 15mm End Cap 635703 EF 22mm End Cap 635704 EF 28mm End Cap 635705 EF 35mm End Cap 635706 EF 42mm End Cap 635707 EF 54mm End Cap 635708 EF 15mm x 10mm Reducer Coupler 635709 EF 22mm x 15mm Reducer Coupler 635710 EF 10mm x 8mm Fitting Reducer 635711 EF 15mm x 8mm Fitting Reducer 635712 EF 15mm x 10mm Fitting Reducer 635713 EF 22mm x 15mm Fitting Reducer 635714 EF 28mm x 15mm Fitting Reducer 635715 EF 28mm x 22mm Fitting Reducer 635716 EF 35mm x 15mm Fitting Reducer 635717 EF 35mm x 22mm Fitting Reducer 635718 EF 35mm x 28mm Fitting Reducer 635719 EF 42mm x 15mm Fitting Reducer 635720 EF 42mm x 22mm Fitting Reducer 635721 EF 42mm x 28mm Fitting Reducer 635722 EF 42mm x 35mm Fitting Reducer 635723 EF 54mm x 15mm Fitting Reducer 635724 EF 54mm x 22mm Fitting Reducer 635725 EF 54mm x 28mm Fitting Reducer 635726 EF 54mm x 35mm Fitting Reducer 635727 EF 54mm x 42mm Fitting Reducer 635728 EF 15mm x 1/2" Adaptor Coupler (Metric/Imperial) 635729 EF 22mm x 3/4" Adaptor Coupler (Metric/Imperial) 635730 EF 28mm x 1" Adaptor Coupler (Metric/Imperial) 635731 EF 8mm x 90 Degree Elbow 635732 EF 10mm x 90 Degree Elbow 635733 EF 15mm x 90 Degree Elbow 635734 EF 22mm x 90 Degree Elbow 635735 EF 28mm x 90 Degree Elbow 635736 EF 35mm x 90 Degree Elbow 635737 EF 42mm x 90 Degree Elbow 635738 EF 54mm x 90 Degree Elbow 635739 EF 15mm x 45 Degree Elbow 635740 EF 22mm x 45 Degree Elbow 635741 EF 28mm x 45 Degree Elbow 635742 EF 35mm x 45 Degree Elbow 635743 EF 42mm x 45 Degree Elbow 635744 EF 54mm x 45 Degree Elbow 635745 EF 15mm x 90 Degree Street Elbow 635746 EF 22mm x 90 Degree Street Elbow 635747 EF 28mm x 90 Degree Street Elbow 635748 EF 35mm x 90 Degree Street Elbow 635749 EF 42mm x 90 Degree Street Elbow 635750 EF 54mm x 90 Degree Street Elbow 635751 EF 15mm x 45 Degree Street Elbow 635752 EF 22mm x 45 Degree Street Elbow 635753 EF 28mm x 45 Degree Street Elbow 635754 EF 35mm x 45 Degree Street Elbow 635755 EF 42mm x 45 Degree Street Elbow 635756 EF 54mm x 45 Degree Street Elbow 635757 EF 15mm x 1/2" Wallplate Elbow Brass 635758 EF 10mm Equal Tee 635759 EF 15mm Equal Tee 635760 EF 22mm Equal Tee 635761 EF 28mm Equal Tee 635762 EF 35mm Equal Tee 635763 EF 42mm Equal Tee 635764 EF 54mm Equal Tee 635765 EF 22mm x 22mm x 15mm Reducer Tee 635766 EF 28mm x 28mm x 15mm Reducer Tee 635767 EF 28mm x 28mm x 22mm Reducer Tee 635768 EF 35mm x 35mm x 15mm Reducer Tee 635769 EF 35mm x 35mm x 22mm Reducer Tee 635770 EF 35mm x 35mm x 28mm Reducer Tee 635771 EF 42mm x 42mm x 15mm Reducer Tee 635772 EF 42mm x 42mm x 22mm Reducer Tee 635773 EF 42mm x 42mm x 28mm Reducer Tee 635774 EF 42mm x 42mm x 35mm Reducer Tee 635775 EF 54mm x 54mm x 15mm Reducer Tee 635776 EF 54mm x 54mm x 22mm Reducer Tee 635777 EF 54mm x 54mm x 28mm Reducer Tee 635778 EF 54mm x 54mm x 35mm Reducer Tee 635779 EF 54mm x 54mm x 42mm Reducer Tee 635780 EF 22mm x 15mm x 22mm Reducer Tee 635781 EF 28mm x 15mm x 28mm Reducer Tee 635782 EF 28mm x 22mm x 28mm Reducer Tee 635783 EF 22mm x 15mm x 15mm Reducer Tee 635784 EF 28mm x 22mm x 22mm Reducer Tee 635785 EF 15mm x 15mm x 22mm Reducer Tee 635786 EF 15mm Full Crossover 635787 EF 22mm Full Crossover 635788 EF 15mm Part Crossover 635789 EF 22mm Part Crossover 635790 EF 15mm x 1/2" Female Adaptor Brass 635791 EF 22mm x 3/4" Female Adaptor Brass 635792 EF 15mm x 15mm x 1/2" Reducer Tee Brass 635793 EF 22mm x 22mm x 1/2" Reducer Tee Brass 635794 EF 15mm x 1/2" Male Adaptor Brass 635795 EF 22mm x 3/4" Male Adaptor Brass 635796 EF 28mm x 1" Male Adaptor Brass 635797 EF 35mm x 1.1/4" Male Adaptor Brass 635798 EF 42mm x 1.1/2" Male Adaptor Brass 635799 EF 54mm x 2" Male Adaptor Brass 635800 EF 15mm x 1/2" Straight Tap Connector 635801 EF 15mm x 3/4" Straight Tap Connector 635802 EF 22mm x 3/4" Straight Tap Connector 635803 EF 15mm x 1/2" Bent Tap Connector 635804 EF 22mm x 1" Straight Union Adaptor 635805 EF 22mm x 1" Bent Union Adaptor

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of copper end feed fittings for use with copper tube to EN 1057. For above and below ground use. Maximum working pressure: 6mm-54mm 16.0bar, 64mm-108mm 10.0bar. Maximum operating temperature 85°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250108018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Flomasta & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

5001: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5002: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm，64mm，67mm，76mm，89mm，108mm 5040: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5041: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5090: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5092: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5085: 12mm，14mm，15mm，16mm，18mm，22mm 5086: 12mm，14mm，15mm，16mm，18mm，22mm 5270: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5301: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，22mm，28mm，35mm，42mm， 45mm, 64mm，67mm，76mm，89mm，108mm 5240: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 15mm，20mm x 16mm，20mm x 18mm， 22mm x 10mm，22mm x 12mm，22mm x 14mm， 22mm x 15mm，22mm x 16mm，22mm x 18mm， 22mm x 20mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 16mm，32mm x 18mm， 32mm x 20mm，32mm x 22mm，32mm x 28mm， 35mm x 12mm，35mm x 15mm，35mm x 18mm， 35mm x 22mm，35mm x 28mm，36mm x 22mm， 36mm x 28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 36mm，42mm x 15mm，42mm x 18mm， 42mm x 22mm，42mm x 28mm，42mm x 32mm， 42mm x 35mm，42mm x 36mm，52mm x 32mm， 52mm x 36mm，52mm x 40mm，52mm x 42mm， 54mm x 15mm，54mm x 22mm，54mm x 28mm， 54mm x 35mm，54mm x 42mm，54mm x 52mm 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm, 108mm x 64mm, 108mm x 76mm，108mm x 89mm 5243: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 16mm，20mm x 18mm，22mm x 10mm， 22mm x 12mm，22mm x 14mm，22mm x 15mm， 22mm x 16mm，22mm x 18mm，22mm x 20mm， 25mm x 12mm，25mm x 14mm，25mm x 16mm， 25mm x 18mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 18mm，32mm x 20mm， 32mm x 22mm，32mm x 28mm，35mm x 12mm， 35mm x 15mm，35mm x 18mm，35mm x 22mm， 35mm x 28mm，36mm x 18mm，36mm x 22mm， 36mm x28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 35mm，40mm x 36mm，42mm x 15mm， 42mm x 18mm，42mm x 22mm，42mm x 28mm， 42mm x 32mm，42mm x 35mm，42mm x 36mm， 42mm x 40mm，52mm x 28mm，52mm x 32mm， 52mm x 35mm，52mm x 36mm，52mm x 40mm， 52mm x42mm，54mm x 15mm，54mm x 18mm， 54mm x 22mm，54mm x 28mm，54mm x 32mm， 54mm x 35mm，54mm x 36mm，54mm x 40mm， 54mm x 42mm，54mm x 52mm, 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm，108mm x 64mm， 108mm x 76mm，108mm x 89mm 5130: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5130R: 6mm x 8mm x 6mm，8mm x 6mm x 6mm ， 8mm x 6mm x 8mm，8mm x 10mm x 8mm， 10mm x 8mm x 6mm ， 10mm x 6mm x 10mm ， 10mm x 8mm x 8mm ， 10mm x 8mm x 10mm ，10mm x 10mm x 8mm ， 10mm x 12mm x 10mm ， 10mm x 15mm x 10mm ， 12mm x 8mm x 8mm ， 12mm x 8mm x 10mm ， 12mm x 8mm x 12mm ， 12mm x 10mm x 8mm ， 12mm x 10mm x 10mm ， 12mm x 10mm x 12mm ， 12mm x 12mm x 8mm ， 12mm x 12mm x 10mm，12mm x 14mm x 12mm， 12mm x 15mm x 12mm，12mm x 16mm x 12mm， 12mm x 18mm x 12mm，14mm x 10mm x 10mm， 14mm x 10mm x 12mm，14mm x 10mm x 14mm， 14mm x 12mm x 10mm，14mm x 12mm x 12mm， 14mm x 12mm x 14mm，14mm x 14mm x 10mm， 14mm x 14mm x 12mm，14mm x 16mm x 12mm， 14mm x 16mm x 14mm，14mm x 18mm x 12mm， 14mm x 18mm x 14mm，14mm x 22mm x 14mm， 15mm x 8mm x 10mm ， 15mm x 8mm x 12mm ， 15mm x 10mm x 10mm，15mm x 10mm x 12mm， 15mm x 12mm x 10mm，15mm x 12mm x 12mm， 15mm x 15mm x 10mm，15mm x 15mm x 12mm， 15mm x 18mm x 12mm，15mm x 18mm x 15mm， 15mm x 22mm x 15mm，15mm x 28mm x 15mm， 16mm x 10mm x 16mm，16mm x 12mm x 12mm， 16mm x 12mm x 14mm，16mm x 12mm x 16mm， 16mm x 14mm x 12mm，16mm x 14mm x 14mm， 16mm x 14mm x 16mm，16mm x 16mm x 10mm， 16mm x 16mm x 12mm，16mm x 16mm x 14mm， 16mm x 18mm x 14mm，16mm x 18mm x 16mm， 16mm x 20mm x 16mm，16mm x 22mm x 16mm， 18mm x 10mm x 10mm，18mm x 10mm x 12mm， 18mm x 10mm x 15mm，18mm x 10mm x 18mm， 18mm x 12mm x 12mm，18mm x 12mm x 14mm， 18mm x 12mm x 15mm，18mm x 12mm x 16mm， 18mm x 12mm x 18mm，18mm x 14mm x 12mm， 18mm x 14mm x 14mm，18mm x 14mm x 16mm， 18mm x 14mm x 18mm，18mm x 15mm x 12mm， 18mm x 15mm x 15mm，18mm x 15mm x 18mm， 18mm x 16mm x 12mm，18mm x 16mm x 14mm， 18mm x 16mm x 16mm，18mm x 16mm x 18mm， 18mm x 18mm x 10mm，18mm x 18mm x 12mm， 18mm x 18mm x 14mm，18mm x 18mm x 15mm， 18mm x 18mm x 16mm，18mm x 20mm x 18mm， 18mm x 22mm x 14mm，18mm x 22mm x 15mm， 18mm x 22mm x 18mm，18mm x 28mm x 18mm， 20mm x 12mm x 20mm，20mm x 14mm x 18mm， 20mm x 14mm x 20mm，20mm x 16mm x 16mm， 20mm x 16mm x 18mm，20mm x 16mm x 20mm， 20mm x 18mm x 16mm，20mm x 18mm x 18mm， 20mm x 18mm x 20mm，20mm x 20mm x 12mm， 20mm x 20mm x 14mm，20mm x 20mm x 16mm， 20mm x 20mm x 18mm，20mm x 22mm x 20mm， 22mm x 10mm x 22mm，22mm x 12mm x 12mm， 22mm x 12mm x 14mm，22mm x 12mm x 15mm， 22mm x 12mm x 18mm，22mm x 12mm x 22mm， 22mm x 14mm x 12mm，22mm x 14mm x 14mm， 22mm x 14mm x 15mm，22mm x 14mm x 16mm， 22mm x 14mm x 18mm，22mm x 14mm x 22mm， 22mm x 15mm x 12mm，22mm x 15mm x 15mm， 22mm x 15mm x 18mm，22mm x 15mm x 22mm， 22mm x 16mm x 14mm，22mm x 16mm x 16mm， 22mm x 16mm x 18mm，22mm x 16mm x 22mm， 22mm x 18mm x 12mm，22mm x 18mm x 14mm， 22mm x 18mm x 15mm，22mm x 18mm x 16mm， 22mm x 18mm x 18mm，22mm x 18mm x 22mm， 22mm x 20mm x 22mm ，22mm x 22mm x10mm ， 22mm x 22mm x 12mm，22mm x 22mm x 14mm， 22mm x 22mm x 15mm，22mm x 22mm x 16mm， 22mm x 22mm x 18mm，22mm x 22mm x 20mm， 22mm x 28mm x 15mm，22mm x 28mm x 22mm， 22mm x 35mm x 22mm，28mm x 10mm x 28mm， 28mm x 12mm x 12mm，28mm x 12mm x 15mm， 28mm x 12mm x 18mm ，28mm x 12mm x22mm ， 28mm x 12mm x 28mm，28mm x 14mm x 18mm， 28mm x 14mm x 28mm，28mm x 15mm x 12mm， 28mm x 15mm x 15mm，28mm x 15mm x 18mm， 28mm x 15mm x 22mm，28mm x 15mm x 28mm， 28mm x 16mm x 15mm，28mm x 16mm x 16mm， 28mm x 16mm x 18mm，28mm x 16mm x 22mm， 28mm x 16mm x 28mm，28mm x 18mm x 12mm， 28mm x 18mm x 15mm，28mm x 18mm x 16mm， 28mm x 18mm x 18mm，28mm x 18mm x 22mm， 28mm x 18mm x 28mm，28mm x 20mm x 20mm， 28mm x 20mm x 28mm，28mm x 22mm x 12mm， 28mm x 22mm x 15mm，28mm x 22mm x 16mm， 28mm x 22mm x 18mm，28mm x 22mm x 22mm， 28mm x 22mm x 28mm，28mm x 28mm x 12mm， 28mm x 28mm x 14mm，28mm x 28mm x 15mm， 28mm x 28mm x 16mm，28mm x 28mm x 18mm， 28mm x 28mm x 22mm，28mm x 42mm x 28mm， 35mm x 12mm x 35mm，35mm x 15mm x 15mm， 35mm x 15mm x 22mm，35mm x 15mm x 28mm， 35mm x 15mm x 35mm，35mm x 18mm x 22mm， 35mm x 18mm x 28mm，35mm x 18mm x 35mm， 35mm x 22mm x 15mm，35mm x 22mm x 18mm， 35mm x 22mm x 22mm，35mm x 22mm x 28mm， 35mm x 22mm x 35mm，35mm x 28mm x 15mm， 35mm x 28mm x 18mm，35mm x 28mm x 22mm， 35mm x 28mm x 28mm，35mm x 28mm x 35mm， 35mm x 35mm x 15mm，35mm x 35mm x 18mm， 35mm x 35mm x 22mm，35mm x 35mm x 28mm， 35mm x 42mm x 35mm，42mm x 14mm x 42mm， 42mm x 15mm x 42mm，42mm x 18mm x 42mm， 42mm x 22mm x 35mm，42mm x 22mm x 42mm， 42mm x 28mm x 22mm，42mm x 28mm x 28mm， 42mm x 28mm x 35mm，42mm x 28mm x 42mm， 42mm x 35mm x 28mm，42mm x 35mm x 35mm， 42mm x 35mm x 42mm，42mm x 42mm x 22mm， 42mm x 42mm x 28mm，42mm x 42mm x 35mm， 42mm x 54mm x 42mm，52mm x 28mm x 52mm， 52mm x 32mm x 52mm，54mm x 15mm x 54mm， 54mm x 18mm x 54mm，54mm x 22mm x 42mm， 54mm x 22mm x 54mm，54mm x 28mm x 42mm， 54mm x 28mm x 54mm，54mm x 35mm x 35mm， 54mm x 35mm x 42mm，54mm x 35mm x 54mm， 54mm x 42mm x 42mm ，54mm x42mm x 54mm ， 54mm x 54mm x 22mm，54mm x 54mm x 28mm， 54mm x 54mm x 35mm，54mm x 54mm x 42mm， 64mm x 35mm x 64mm，64mm x 42mm x 64mm， 64mm x 54mm x 64mm，67mm x 28mm x 67mm， 67mm x 35mm x 67mm，67mm x 42mm x 67mm， 67mm x 54mm x 67mm，76mm x 28mm x 76mm， 76mm x 35mm x 76mm，76mm x 42mm x 76mm， 76mm x 54mm x 76mm，76mm x 64mm x 76mm， 89mm x 54mm x 89mm，89mm x 64mm x 89mm， 89mm x 76mm x 89mm，108mm x 35mm x 108mm， 108mm x 54mm x 108mm， 108mm x 64mm x 108mm， 108mm x 76mm x 108mm， 108mm x 89mm x 108mm 5062: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，18mm x 1/2"，12mm x 3/4''， 14mm x 3/4''，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，18mm x 1''， 22mm x 1''，28mm x 11/4''，54mm x 2'' 5063: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，22mm x 1'' 5270S: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

1 Paddington Square, London

Postcode

W2 1GG

View All Listings by this Company

Range of water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 Bar Maximum operating temperature 65.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” - 8” Flange

Marking:

BOSS and product info on meter body. Flow arrow on valve body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

38410094 - BOSS 35WMCFP 50MM FLGD COLD WATER METER WOLTMANN PULSED 38410102 - BOSS 35WMCFP 65MM FLGD COLD WATER METER WOLTMANN PULSED 38410113 - BOSS 35WMCFP 80MM FLGD COLD WATER METER WOLTMANN PULSED 38410124 - BOSS 35WMCFP 100MM FLGD COLD WATER METER WOLTMANN PULSED 38410135 - BOSS 35WMCFP 125MM FLGD COLD WATER METER WOLTMANN PULSED 38410146 - BOSS 35WMCFP 150MM FLGD COLD WATER METER WOLTMANN PULSED 38410157 - BOSS 35WMCFP 200MM FLGD COLD WATER METER WOLTMANN PULSED 38410242 - BOSS 35WMCFB 50MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410253 - BOSS 35WMCFB 65MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410264 - BOSS 35WMCFB 80MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410275 - BOSS 35WMCFB 100MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410349 - BOSS 35WMCFW 50MM FLGD COLD WATER METER M/JET MBUS W/LESS 38410360 - BOSS 35WMCFW 65MM FLGD COLD WATER METER W/MANN MBUS W/LESS 38410371 - BOSS 35WMCFW 80MM FLGD COLD WATER METER W/MANN MBUS W/LESS 38410382 - BOSS 35WMCFW 100MM FLGD COLD WATER METER W/MANN MBUS W/LESS 38410456 - BOSS 35WMCFB 50MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410467 - BOSS 35WMCFB 65MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410478 - BOSS 35WMCFB 80MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410489 - BOSS 35WMCFB 100MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410574 - BOSS 35WMHFP 50MM FLANGED HOT WATER METER WOLTMANN PULSED 38410585 - BOSS 35WMHFP 65MM FLANGED HOT WATER METER WOLTMANN PULSED 38410596 - BOSS 35WMHFP 80MM FLANGED HOT WATER METER WOLTMANN PULSED 38410604 - BOSS 35WMHFP 100MM FLANGED HOT WATER METER WOLTMANN PULSED 38410615 - BOSS 35WMHFP 125MM FLANGED HOT WATER METER WOLTMANN PULSED 38410626 - BOSS 35WMHFP 150MM FLANGED HOT WATER METER WOLTMANN PULSED 38410637 - BOSS 35WMHFP 200MM FLANGED HOT WATER METER WOLTMANN PULSED 38410711 - BOSS 35WMHFB 50MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410722 - BOSS 35WMHFB 65MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410733 - BOSS 35WMHFB 80MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410744 - BOSS 35WMHFB 100MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410818 - BOSS 35WMHFW 50MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410829 - BOSS 35WMHFW 65MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410840 - BOSS 35WMHFW 80MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410851 - BOSS 35WMHFW 100MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410456 - BOSS 35WMHFB 50MM FLGD HOT WATER METER WOLTMANN C/W LORA 38410467 - BOSS 35WMHFB 65MM FLGD HOT WATER METER WOLTMANN C/W LORA 38410478 - BOSS 35WMHFB 80MM FLGD HOT WATER METER WOLTMANN C/W LORA 38410489 - BOSS 35WMHFB 100MM FLGD HOT WATER METER WOLTMANN C/W LORA

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of inline water meters with brass bodies (blue or red epoxy coating). The inlet incorporates a plastic strainer. Maximum working pressure 16.0 Bar. Maximum operating temperature 85.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) to 2 ½” BSP (M).

Marking:

BOSS on dial cap. Flow arrow & size on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

38410050 - BOSS 35WMCP 25MM COLD WATER METER MULTI JET PULSED 38410061 - BOSS 35WMCP 32MM COLD WATER METER MULTI JET PULSED 38410072 - BOSS 35WMCP 40MM COLD WATER METER MULTI JET PULSED 38410083 - BOSS 35WMCP 50MM COLD WATER METER MULTI JET PULSED 38410190 - BOSS 35WMCB 25MM COLD WATER METER MULTI JET C/W MBUS 38410209 - BOSS 35WMCB 32MM COLD WATER METER MULTI JET C/W MBUS 38410220 - BOSS 35WMCB 40MM COLD WATER METER MULTI JET C/W MBUS 38410231 - BOSS 35WMCB 50MM COLD WATER METER MULTI JET C/W MBUS 38410305 - BOSS 35WMCW 25MM COLD WATER METER MULTI JET MBUS WIRELESS 38410316 - BOSS 35WMCW 32MM COLD WATER METER MULTI JET MBUS WIRELESS 38410327 - BOSS 35WMCW 40MM COLD WATER METER MULTI JET MBUS WIRELESS 38410338 - BOSS 35WMCW 50MM COLD WATER METER MULTI JET MBUS WIRELESS 38410412 - BOSS 35WMCB 25MM COLD WATER METER MULTI JET C/W LORA 38410423 - BOSS 35WMCB 32MM COLD WATER METER MULTI JET C/W LORA 38410434 - BOSS 35WMCB 40MM COLD WATER METER MULTI JET C/W LORA 38410445 - BOSS 35WMCB 50MM COLD WATER METER MULTI JET C/W LORA 38410530 - BOSS 35WMHP 25MM HOT WATER METER MULTI JET PULSED 38410541 - BOSS 35WMHP 32MM HOT WATER METER MULTI JET PULSED 38410552 - BOSS 35WMHP 40MM HOT WATER METER MULTI JET PULSED 38410563 - BOSS 35WMHP 50MM HOT WATER METER MULTI JET PULSED 38410670 - BOSS 35WMHB 25MM HOT WATER METER MULTI JET C/W MBUS 38410681 - BOSS 35WMHB 32MM HOT WATER METER MULTI JET C/W MBUS 38410692 - BOSS 35WMHB 40MM HOT WATER METER MULTI JET C/W MBUS 38410700 - BOSS 35WMHB 50MM HOT WATER METER MULTI JET C/W MBUS 38410777 - BOSS 35WMHW 25MM HOT WATER METER MULTI JET MBUS WIRELESS 38410788 - BOSS 35WMHW 32MM HOT WATER METER MULTI JET MBUS WIRELESS 38410799 - BOSS 35WMHW 40MM HOT WATER METER MULTI JET MBUS WIRELESS 38410807 - BOSS 35WMHW 50MM HOT WATER METER MULTI JET MBUS WIRELESS

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

¾” BSP (M) inlet/outlet (DN15). 1” BSP (M) inlet/outlet (DN20). 1¼” BSP (M) inlet/outlet (DN25). 1½” BSP (M) inlet/outlet (DN32) 2” BSP (M) inlet/outlet (DN40)

Marking:

Genebre, year of manufacture (yy), ‘NWM’ & technical info on dial facer. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

6110C 6115C 6120C 6111C 6121C

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

DN32 - DN150 flange

Marking:

DST Group on adhesive label on body DN, PN & YY/MM etched on body

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

PF16W032 PF16W040 PF16W050 PF16W065 PF16W080 PF16W100 PF16W125 PF16W150

Approval Holder:

DST Group Ltd

Company Name

DST Group Ltd

Address

Piksa House 2 Penrod Way Heysham

Postcode

LA3 2UZ

Country

United Kingdom

Phone

01524 389 494

General Email

sharronwood@dstgroup.co.uk

View All Listings by this Company

Range of accumulators. The brass vessel connector of the ACC-060-TNK, ACC-120-TNK and ACC-180-TNK models incorporates a plastic flow regulator. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided EPDM lined flexible hose assembly with ¾” captive nut end connection

Marking:

Salamander Pumps and model number on adhesive label on body.

Installation Requirements:

R001 R009

Expiry date:

30/04/2030

Model:

ACC-060-TNK, ACC-120-TNK, ACC-180-TNK, ACC-330-TNK & ACC-450-TNK.

Approval Holder:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Manufacturer:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

ESPH XXS-XX\XX 1.XX:Rated flow(m³/h),range:2、3、4、8、10、12、16、20m³/h 2.XX:Impeller progession (1,2,3,4,5,6,7)*5 3.xx:Small Impeller (1) 4.End connection mode and size Rated flow(2、3m³ /h) :G1"XG1" Rated flow(4m³ /h) :G1¼"XG1" Rated flow(8、10、12m³ /h) :G1½"XG1½" Rated flow(16、20m³ /h) :G2"XG2"

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TPF on cover. TPF, model & technical information on data label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

TPVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2 ， On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 THM(-3)XX-XX\XX-SE 1. -3: different phase. -- -3: three phase，none: single phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、 16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Approval Holder:

TADMUR PUMP FACTORY WLL

Company Name

TADMUR PUMP FACTORY WLL

Address

P.O. BOX 212023 DOHA

Country

Qatar

View All Listings by this Company

Range of combined storage and booster sets, incorporating a cold-water storage cistern, submersible pump, solenoid valve or alternative actuated ball valve, non-return valve (not suitable for backflow protection), isolation valves and expansion vessel. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Dutypoint, model & product info on label.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Dutypoint Systems ScubaTANK range comprising of models: ‘ WX A BBBB CCC’ – where: ‘A’ denotes number of pumps and is replaced with 1 or 2. ‘BBBB’ denotes pump size and is replaced with 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060 or 9090. ‘CCC’ denotes size of storage cistern in litres and is replaced with 175, 300, 375, 440, 490, 490, 575, 650, 750, 800, 1050, 1250, 1650 or 2250.

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

“TPE 2 & TPE3 series” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure: Cast iron models: 16.0 bar, Stainless steel models: 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250307702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Cast iron models: DN32 - DN100 Flanged inlet/outlet. Stainless steel models: DN32 - DN65 Flanged inlet/outlet.

Marking:

Grundfos and Grundfos logo, type, model, product no., technical info and manufacturing country on data plate. Grundfos and Grundfos logo on control unit.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

TPE2/3 series: TPE 2 or 3 (E) XX-XXX S or N - A or AI or X - F - A or I - XXXX - YYY Where: TPE2 = pump type with normal Asynchronous motor. TPE3 = pump type with E-motor (motor with integrated frequency driver). XX = nominal DN size of inlet/outlet ports (cast iron 32 - 100, S/Steel 32 - 65). XXX = maximum head (dm). S or N = S: Built-in differential-pressure and temperature sensor (TPE3 models), N: Without built-in sensor (TPE2 models). A or AI or X = A: Basic version, AI: PN6 flange, X: Special Version. F = DIN Flanged. A or I = A: Basic Version. Cast iron pump housing and motor stool, I: S/Steel pump housing and motor stool. XXXX = shaft seal type - BQQE or BQBE. YYY = coding for motor. E.g. TPE3 100-120 S-X-F-A-BQQE-GAB

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

BOSS Range of Y-pattern strainers with DZR brass bodies and stainless steel strainers. The compression connection is for use with copper pipe to BS EN1057. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (compression models). Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

BOSS, date of manufacture: MM-YY, CR & flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/08/2030

Model:

10460003 - 15MM BOSS 46W Y STRAINER DZR 1/2" BSP (F) 10460014 - 20MM BOSS 46W Y STRAINER DZR 3/4" BSP (F) 10460025 - 25MM BOSS 46W Y STRAINER DZR 1" BSP (F) 10460036 - 32MM BOSS 46W Y STRAINER DZR 1-1/4" BSP (F) 10460047 - 40MM BOSS 46W Y STRAINER DZR 1-1/2" BSP (F) 10460058 - 50MM BOSS 46W Y STRAINER DZR 2" BSP (F) 10460110 - 15MM BOSS 46CW Y STRAINER DZR 15MM Compression 10460121 - 22MM BOSS 46CW Y STRAINER DZR 22MM Compression

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with a metal back nut. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250302043

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M) (4E1280 & 4E1024) 3/4” BSP (M) (4E1281)

Marking:

Instinct logo on operating member

Installation Requirements:

R001 R006

Expiry date:

31/03/2030

Model:

4E1281 4E1280 4E1024

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

Pillar tap (chromium plated brass) with quarter turn ceramic disc headworks and a single lever operating member. The spout outlet incorporates a plastic flow straightener, and the product is supplied with a metal back nut. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250302044

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M)

Marking:

Clever logo on body

Installation Requirements:

R001 R005

Expiry date:

31/03/2030

Model:

4S1201

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

Range of stainless steel braided, nylon braided, double locked (metal outer) or reinforced (see model), PEX/HTRPE lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections (see model). Maximum operating temperature 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250302005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

See model

Marking:

WRAS, YS and date of manufacture (YYMM) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

2012 XX X DNX AxB LXXXX Where 2012 denotes the series name and hose lining: 20 = series name 12 = inner hose material: PEX/HTRPE Where the first two XX denotes the colour of the exterior hose and can be replaced by: GY = grey, YS = transparent, WH = white, BK = black, GO = golden, CP = chrome, BR = bronze, BN = nickel, Blank = stainless nature, RE = red, BL = blue, SS = stainless nature, ORB = oil rubbed bronze, AC = antique copper plated Where the third X denotes exterior hose and replaced by: T = reinforced hose, LL = nylon braided sheath, SS = stainless steel braided sheath, S = double lock hose Where DNX denotes the nominal diameter of inner hose and can be replaced by: DN4, DN6, DN8, DN10 Where A×B denotes the free combination of hose end connector and can be replaced by: T8 = (8mm Quick Release Spigot), T10 = (10mm Quick Release Spigot), T12 = (12mm Quick Release Spigot), T14 = (14mm Quick Release Spigot), T15 = (15mm Quick Release Spigot), T16 = (16mm Quick Release Spigot), T18 = (18mm Quick Release Spigot), M8 = (8mm Male M Thread), M10 = (10mm Male M Thread), M12 = (12mm Male M Thread), M14 = (14mm Male M Thread), M15 = (15mm Male M Thread), M16 = (16mm Male M Thread), M18 = (18mm Male M Thread), F1/2" = ½” BSP (F), M1/2" = ½” BSP (M), F3/8" = 3/8” BSP (F), M3/8" = 3/8” BSP (M), F3/4" = ¾” BSP (F), M3/4" = ¾” BSP (M), F7/16" = 7/16” BSP (F), M7/16" = 7/16” BSP (M), F9/16" = 9/16” BSP (F), M9/16" = 9/16” BSP (M), F11/16" = 11/16” BSP (F), M11/16" = 11/16” BSP (M). Where LXXXX denotes the length of hose and be replaced by anything between: L0200 (200mm) and L2500 (2500mm)

Manufacturer:

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Company Name

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Address

41th Building, No.1777 Jilong Road, Tongan Industrial Zone (Huli), Xiamen, Fujian, 361100

Country

China

View All Listings by this Company

Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 65.0°C. Open outlet use only.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250702003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP captive nut connection inlet x outlet

Marking:

Hansgrohe or AXOR (brand of Hansgrohe) on captive nut.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

28 278 xx0 hansgrohe Isiflex 30 7237 xx hansgrohe Isiflex 30 3308 xx hansgrohe Isiflex 28 272 xx0 hansgrohe Isiflex 30 3312 xx hansgrohe Isiflex 30 1820 xx hansgrohe Isiflex 33 1820 xx hansgrohe Isiflex 28 622 xx0 AXOR 28 712 xx2 hansgrohe Isiflex 30 3315 xx hansgrohe Isiflex 31 9221 xx hansgrohe Isiflex 33 9221 xx hansgrohe Isiflex 28 276 xx0 hansgrohe Isiflex 30 3215 xx AXOR 28 626 xx0 AXOR 30 3316 xx hansgrohe Isiflex 33 1821 xx hansgrohe Isiflex 30 1821 xx hansgrohe Isiflex 34 1821 xx hansgrohe Isiflex 36 1821 xx hansgrohe Isiflex 28 713 xx2 hansgrohe Isiflex 30 2130 xx hansgrohe Isiflex 33 2130 xx hansgrohe Isiflex 30 3317 xx hansgrohe Isiflex 32 2130 xx hansgrohe Isiflex 28 274 xxx hansgrohe Isiflex 30 1822 xx hansgrohe Isiflex 30 8996 xx hansgrohe Isiflex 28 624 xx0 AXOR 31 1822 xx hansgrohe Isiflex 30 3320 xx hansgrohe Isiflex Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of stainless steel braided EPDM lined flexible hose assemblies. The captive nut and M15x1 end connections incorporate a washer. The M8x1, M10x1 and M12x1 end connections incorporate an ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250115009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

YUHUAN WEILEBAO SANITARY WARE CO., LTD. WRAS, year of manufacture by YYYY on ferrule.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

WLB-EPDM-01 series. Bore diameters: DN6, DN8 and DN10. Available end connections: ⅜”, ½”, ¾”, F12x1, F15x1 captive nut. F10x1. 9/16” BSW (F). M8x1, M10x1, M12x1, M15x1. ⅜”, ½”, ¾” BSP (M). 9/16” BSW (M).

Approval Holder:

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Company Name

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Address

No. 209 Shuangyang Road, Qinggang Town, Yuhuan City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Company Name

Yuhuan Weilebao Sanitary Ware Co., Ltd.

Address

No. 209 Shuangyang Road, Qinggang Town, Yuhuan City, Zhejiang Province

Country

China

View All Listings by this Company

Range of stainless-steel braided flexible hose assemblies incorporating EPDM inner and plastic (BFSFH12-EE80/150) or brass (BFSFH19-EE60) captive nut end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241002101

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP X 3/4” BSP ELBOW.

Marking:

MIDBRASS®, WRAS and Year of manufacture (YYYY).

Installation Requirements:

R001 R008

Expiry date:

31/10/2029

Model:

BFSFH12-EE80, BFSFH19-EE60 & BFSFH12-EE150.

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company

Manufacturer:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

General Email

sales@navigatormsl.com

View All Listings by this Company

Manufacturer:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

General Email

sales@navigatormsl.com

View All Listings by this Company

Range of wall mounted, concealed, digitally controlled thermostatic blending valve with a 1, 2 or 3 outlets, incorporating a plastic body, the flow and temperature is controlled via a digital user interface. Products incorporate a built-in pump and a solenoid valve. Maximum working pressure 1.0 Bar Maximum operating temperature 65.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250302013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm spigot connection

Marking:

Aqualisa logo, pressure, temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R040

Expiry date:

31/03/2029

Model:

705758 705759 705760 Models added July 2025 1013928 1013929 1001269 1001271 1001273

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of wall mounted thermostatic bar shower mixers ((brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating members. Models come with either 2,3 or 4 push type headworks for different functions. The inlet incorporates approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Products are supplied with a shower handset, shower hose. The products need to be installed in combination with a specific basic set. 12 571 xx0= 18310180 Basic set for thermostatic module Select for 2 functions (WRAS 2207061) 12 572 xx0= 18311180 Basic set for thermostatic module Select for 3 functions (WRAS 2207061) 12 573 xx0= 18312180 Basic set for thermostatic module Select for 4 functions (WRAS 2207061) Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250302018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

To be used with basic set Hansgrohe 18 312 180

Marking:

AXOR on face plate and shower handset

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Model:

12 571 xx0 12 572 xx0 12 573 xx0 Note: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Wall mounted thermostatic shower panel ((brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating members. Model has 3 push type headworks for different functions. The inlet incorporates approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Products are supplied with a shower handset, shower hose. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250302019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

For use with various rough kits that are 3/4" BSP (F) or 1/2" BSP (F) inlet/outlet

Marking:

AXOR on shower handset and trim set

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Model:

12 595 xxx Product must be installed with AXOR shower composition basic set 12 676 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted, concealed, thermostatic shower valves (brass bodies – various finishes) incorporating a ceramic disc diverter with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating members incorporating a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 75°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250388005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Products are not supplied with shower hose, handsets, overhead showers or riser rail assemblies.

Size:

Vi Box TVD00065100000 - 1/2" BSP (F)

Marking:

Villeroy & Boch logo on lever

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2030

Model:

TVD000001000xx TVD000652000xx TVD000653000xx TVS127001000xx TVS127002000xx TVS111001000xx TVS111002000xx TVD128002000xx TVD122001000xx Products must be used in conjunction with Vi Box TVD00065100000. This Vi Box does not form as part of this approval. Where xx denotes the surface finish 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of eccentric lugged or wafer type butterfly valves with stainless teel or blue epoxy coated bodies and stainless steel or epoxy coated ductile iron discs, incorporating EPDM or PTFE seats (see models). Max working pressure: 10.0 Bar, 16.0 Bar or 20.0 Bar (see models). Max operating temperature 80°C or 99°C (see models).

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250302009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Models 301-371X-125LB Wafer Type & 302-371X-125LB Lug type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’, 12’’, 14’’, 16’’, 18", 20" & 24" Models: 811-372F-150LB Wafer Type & 812-372F-150LB Lug Type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’ & 12” Lug type connections Model: D342X-16Q: DN200, DN300, DN400, DN500, DN600, DN800, DN1000 & DN1200 Flange connections

Marking:

EMV, PN, temperature and other technical information on data plate on body. Shanghai Ever Mark Valves logo, flow arrow and size cast on body. Note Flow Arrow is only present on models 811-372F-150LB & 812-372F-150LB.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

301-371X-125LB Wafer type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 302-371X-125LB Lug type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 811-372F-150LB Wafer type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C 812-372F-150LB Lug type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C D342X-16Q. Eccentric flanged type, Epoxy coated ductile iron discs and stainless steel seats, 16.0 Bar, 80°C

Product Images