Range of stainless-steel braided, EPDM lined flexible hose assemblies. The captive nut end connections incorporate a washer, the M10 connection incorporates an ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AQDL1 | Chrome | 15mm compression | 10 bar | 65 °C | AQUALISA | Valve body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Shower Hose, Handset, |
Range of DZR brass and nickel plated DZR brass pressure reducing valves with a pressure gauge connection. Compression connection to be used with copper pipe EN1057. Outlet pressures adjustable between 1.5 & 7.0 bar (pre-set at 3.0 bar). Maximum working pressure 16.0 bar. Maximum operating temperature of 85°C.
Range of electrically or battery operated motorised spherical valves incorporating brass, DZR brass or stainless-steel bodies, stainless steel balls and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of lever or butterfly operated spherical valves with brass or nickel plate bodies and ball, (DZR brass body and ball on 40 bar models). Maximum working pressure: Various – see model section. Maximum operating temperature 99.0°C
2014 Range of stainless steel inline spherical valves incorporating a stainless-steel ball, PTFE gasket and seat with a lever type operating member. Maximum operating pressure 62 bar. Maximum operating temperature 23°C
Range of plastic bodied inline, tee and angled spherical or servicing valves with EPDM ‘O’-rings. The products are either lever or screwdriver operated (see model). The products are for use with PE-X pipe (manufactured to BS 7291-3) and copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Cold water use only. From March 2026: Maximum operating temperature 65°C for all models except AVT67665SM, AVT67661SM and AVT67445SM.
‘Series 116’ range of balancing valves (DZR Brass body). Some models can be supplied with a thermometer (see model). The outlet of the 116144, 116154, 116244 & 116254 models incorporate an approved check valve cartridge, verified by test (suitable for backflow protection against fluid category 2). Compression connection to be used with copper pipe EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of floor standing or wall mounted water dispensers which dispenses ambient and/or chilled water. Flow is controlled via self-closing headwork and products have either tap with lever operating members, a tap with floor pedal (floor standing models only), a bubbler with push button or a bubbler with floor pedal (floor standing models only). Maximum working pressure 6.0 bar. Cold water use only.
Range of polyethylene pressure vessels with spun fibreglass casing. Maximum working pressure 10.0 bar Maximum operating temperature 50°C.
‘EPACRETE EPAPOX 25 & EPAPROOF FPCS WFC’. Factory applied, off-white coloured (once mixed and applied), two-part epoxy primer for use with two-part polyurea coating. Mix parts A & B of EPACRETE EPAPOX 25 in a 100:50 weight ratio and apply as per manufacturers TDS 01.140317. Cure for 4 hours@25°C. Mix parts A & B of EPAPROOF FPCS WFC in a 100:100 volume ratio and apply as per manufacturers TDS rev 01-2023. Cure for 24 hours@25°C. For use with water up to 60°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
‘662016, 662014, 662062/SF (251VM), 662062-10PK/SF (523VM), 662061-10PK/SF (113VM)’. White coloured, PTFE tapes manufactured by calendering. For use with water up to 85°C.
‘AH Codes: 662016CB & 662014CB, CB Codes: 571983 & 571984’. White coloured, PTFE tape manufactured by calendering. For use with water up to 85°C.
'FKM 70 514404'. Black coloured, compression moulded FKM 'O' ring. Shore hardness 70. Tested in-radius size 5.0mm. For use with water up to 85°C.
BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 090 8xx | Various | G 1/2" | 10 bar | 65 °C | AXOR | on the nut | Yes | Not applicable | Not Applicable | Not Applicable | Shower Hose, |
Where 8xx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SH-T8089D-** | Various | ¾” to ½” Offset Unions. | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk | |||
| SH-T8089-** | Various | ¾” to ½” Offset Unions. | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk | |||
| SH-T80810-** | Various | ¾” to ½” Offset Unions. | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk | |||
| SH-T80810D-** | Various | 15mm compression union | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk |
-**Represents the following different surface treatments: 1.PB-ARTISAN BRASS 2.EB-Matte black 3.CP-CHROME
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TVS106353110xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS103353000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVT127001000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS112003000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS125003000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS104353000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS107005000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS106353113xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVT111001000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS122002000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS108008000xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS105353110xx | null | 1/2" F | 10 bar | 60 °C | V&B Logo | Operating Member | Yes | Ceramic cartridge | null | null | null | |
| TVS00035100000 | null | 1/2" F | 10 bar | 60 °C | null | null | Yes | Ceramic cartridge | null | null | null |
TVS00035100000 – Vi-Box is used in conjunction with all of the models. Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 35A4 | 35mm | 25 bar | 65 °C | Hassem logo | Body | No | Ceramic cartridge | ||||
| 40A | 40mm | 25 bar | 65 °C | Hassem logo | Body | No | Ceramic cartridge | ||||
| HSP-024 | 18mm | 25 bar | 65 °C | HS, Production date(YYYYMMDD) | Body | No | Push button detent | ||||
| QB-001L | BSP 3/4" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| QB-001R | BSP 3/4" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| HSD-A001L | BSP 1/2" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| HSD-A001R | BSP 1/2" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| HSE-N003L | BSP 1/2" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| HSE-N003R | BSP 1/2" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| QB-318 | BSP 3/4" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| QD-445 | BSP 1/2" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc | ||||
| QD-446 | BSP 1/2" (M) | 25 bar | 65 °C | Hassem logo | Body | No | 1/4 Turn ceramic disc |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 99078-H | 25mm Ø | bar | 85 °C | Aerre plast and date of manufacture (MM/YY) | On body | Yes | Not applicable | Not Applicable | Not Applicable | ||
| 99014-H | 32mm Ø | bar | 85 °C | Aerre plast and date of manufacture (MM/YY) | On body | Yes | Not applicable | Not Applicable | Not Applicable | ||
| G22151-N | 34mm Ø | bar | 85 °C | Aerre plast and date of manufacture (MM/YY) | On body | Yes | Not applicable | Not Applicable | Not Applicable | ||
| 99150-H | 35mm Ø | bar | 65 °C | Aerre plast and date of manufacture (MM/YY) | On body | Yes | Not applicable | Not Applicable | Not Applicable | ||
| 99095-H | 28.5mm Ø | bar | 85 °C | Aerre plast and date of manufacture (MM/YY) | On body | Yes | Not applicable | Not Applicable | Not Applicable | ||
| 99090-H | 28.5mm Ø | bar | 85 °C | Aerre plast and date of manufacture (MM/YY) | On body | Yes | Not applicable | Not Applicable | Not Applicable |
The cartridges 99078-H and 99014-H are re-approvals of certificate 2007006 (Expiry date: 31/07/2025) The cartridges G22151-N, 99150-H, 99095-H, 99090-H are on the same family and we would like to add to the same certificate.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2720067 | Chromed | 1/2" Captive nut | 10 bar | 60 °C | MVI | Body | No | Ceramic cartridge | C-plate | Aerator |
Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies incorporating a ceramic cartridge headwork with a various operating member. The product incorporates a pull-out spout with a plastic aerator. Maximum working pressure 6 Bar Maximum operating temperature 65°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 34 010 xx0 | Various | G 3/8 | 10 bar | 60 °C | AXOR | on body | Yes | Ceramic cartridge | C-plate | Aerator | Lever Operated Pop-up | |
| 34 016 xx0 | Various | G 3/8 | 10 bar | 60 °C | AXOR | on body | Yes | Ceramic cartridge | C-plate | Aerator | Lever Operated Pop-up | |
| 34 017 xx0 | Various | G 3/8 | 10 bar | 60 °C | AXOR | on body | Yes | Ceramic cartridge | C-plate | Aerator | Open Outlet | |
| 34 127 xx0 | Various | G 3/8 | 10 bar | 60 °C | AXOR | on body | Yes | Ceramic cartridge | C-plate | Aerator | Open Outlet |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-WB791* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB791H* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB1020* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB1020H* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB1021* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB1021H* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB1022* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB1022H* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator |
The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TPASHMONO3 | Chromed | 1/2" Captive nut | 10 bar | 60 °C | Lecico bathrooms | Rear of body | No | Ceramic cartridge | C-plate | Aerator | |
| TPSOUMONO3 | Chromed | 1/2" Captive nut | 10 bar | 60 °C | Lecico bathrooms | Rear of body | No | 1/4 Turn ceramic disc | C-plate | Aerator |
Range of single-hole, single outlet, (fixed) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members.The spout otlet incorporates a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4001JC45-1 | Chrome | 1/2BSP(F) | 10 bar | 85 °C | HUANRI | BODY | No | Ceramic cartridge | C-plate | Aerator | Click Type | |
| 4001JC45-3 | Chrome | 1/2BSP(F) | 10 bar | 85 °C | HUANRI | BODY | No | Ceramic cartridge | C-plate | Aerator |
The model 4001JC45-1 and 4001JC45-3 taps are same, except that 4001JC45-1 comes with a click-type waste fitting included during sale, while the 4001JC45-3 model does not.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T5002 | Chrome plating | ½” BSF (F) Captive nut | 5 bar | 65 °C | SONAS | on operating member | No | Ceramic cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-WK794* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WK795* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WK1034* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WK305* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator | |
| JD-WB792* ** | Various | ½” captive nut | 10 bar | 60 °C | Kind | Handle | No | Ceramic cartridge | Not Applicable | Aerator |
* stands for the different handle A, B,C and D ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
Range of ‘PPS/GF BFS (black)’ shrink back fittings for use with ‘Uponor Combi pipe’ (PEX/EVOH/PEX). Maximum operating pressures 12 bar & 6 bar, with maximum operating temperatures 20°C & 95°C respectively.
'Instantor’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Instantor’ stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
Range of press fittings (brass bodies) with stainless steel press (‘TH’ profile) collars and EPDM o-rings for use with ‘EA’ PE-Xb/AL/PE-Xb’ multilayer pipe (for press fitting connections) or copper pipe manufactured to EN1057 (compression connections). Maximum working pressure: 10 bar. Maximum operating temperature: 95 °C.
Range of ZL brass compression fittings. Compression connection is to be used with copper pipe EN1057. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of copper press fittings (‘M’ type crimp profile) and brass threaded adaptor fittings, for use with copper pipe (manufactured to EN1057). Maximum working pressure and operating temperatures: 16.0 bar @ 30°C and 10.0 bar @ 95°C.
Plastic bodied inline push fit reducer for use with Shin Won Tube Co., Ltd. SWPE™ (LLDPE) tube, (not covered by the scope of this approval). Maximum working pressure 10.0 bar. Cold water use only.
Stainless steel M-profile press-fit fittings (316L) and pipes (316L - EN 10312 and 304 – EN 10312). Maximum operating pressure 16 bar. Maximum operating temperature 100°C.
Range of copper or brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘V’ profile. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Screw down, angled isolation valve with a dome type operating member, incorporating a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
FVC & FVS Ranges of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| WJ V/HANDLE CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 931 IX | STAINLESS STEEL | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 23931 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 27931 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 28931 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 21931 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 649510 CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 639510 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 679510 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 689510 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 619510 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH G | POLISHED GOLD | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH NK | NICKEL | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 15930 CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 23930 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 27930 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 28930 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 21930 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No |
Range of ‘THINK-A-FLEX’, EPDM lined, stainless steel braided flexible hose assemblies incorporating various end connections Maximum working pressure: 10 BAR Maximum operating temperature: 65°C
Range of concealed, wall mounted thermostatic shower valves with brass bodies (chromium plated trim sets). The products incorporate a one or two-way function and a thermostatic cartridge controlling the temperature with lever type operating members. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 10 bar. Maximum operating temperature 60°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SD-ZJXXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD124-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD205-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD127-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD170-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD190-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD246-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD191-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD109-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD207-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD101-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD116-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD117-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD125-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD128-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD156-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD168-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD209-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD210-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD212-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD213-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD220-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD222-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD236-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD238-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc | |||
| SD240-XXXX | Chrome | 3/4BSP(F) | 10 bar | 60 °C | SHENGDIAN,“H” and “C” | on face Panel | No | 1/4 Turn ceramic disc |
XXXX represent five series shower valves and can be replaced to 2500, 2501, 2503, 2504, 2702.
Combined temperature and pressure relief valves pre-set at 7.0 or 10.0 bar (See models) with a DZR brass body. The valves incorporate lever easing gear. Maximum working pressure: See models. Maximum operating temperature 85.0°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D22P-1D | 22mm | 16 bar | 85 °C | MS, D22-1D | Body | No | |||||
| D26P-3 | 26mm | 16 bar | 85 °C | MS, D26P-3 | Body | No | |||||
| D26P-3B | 26mm | 16 bar | 85 °C | MS, D26P-3B | Body | No | |||||
| D26P-3FY | 26mm | 16 bar | 85 °C | MS, D26P-3FY | Body | No | |||||
| D28P-3B2 | 28mm | 16 bar | 85 °C | MS, D28P-3B2 | Body | No | |||||
| D28P-3B3 | 28mm | 16 bar | 85 °C | MS, D28P-3B3 | Body | No | |||||
| D28P-3D2 | 28mm | 16 bar | 85 °C | MS, D28P-3D2 | Body | No | |||||
| D28P-6 | 28mm | 16 bar | 85 °C | MS, D28P-6 | Body | No | |||||
| D40P-19A | 40mm | 16 bar | 85 °C | MS, D40P-19A | Body | No | |||||
| D40P-19B2 | 40mm | 16 bar | 85 °C | MS, D40P-19B2 | Body | No | |||||
| D56P-1 | 56mm | 16 bar | 85 °C | MS, D56P-1 | Body | No | |||||
| D56P-2 | 56mm | 16 bar | 85 °C | MS, D56P-2 | Body | No | |||||
| D56P-3 | 56mm | 16 bar | 85 °C | MS, D56P-3 | Body | No |
Range of piston type float operated valves with plastic bodies. Maximum operating pressure: 14 bar. Maximum operating temperature: 23°C.
Range of 3-way brass spherical valves incorporating a chrome plated brass ball and PTFE seats. Maximum working pressure: See models Maximum operating temperature 60.0°C
Range of DZR brass combination valves consisting of an in-line adjustable pressure reducing valve (2.1 - 16.0 bar for ILG22-2 model and 1.4 - 6.0 bar for all other models), a pressure relief valve (set @ 6.0 bar) and EPDM gaskets and ‘O’-rings. The product incorporates a stainless-steel mesh and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 90°C.
Range of inline magnetic or electrolytic scale inhibitors with copper or bodies, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 8.0 bar. Electrolytic models have a maximum operating temperature of 40°C. Magnetic models are cold water use only.
Page 25 of 27
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
