Section:

0684 Combination Tap Assemblies

Description:

A Tap(s) with a non-touch methods of flow control and a single inlet.

Wall mounted - Concealed. Product activated via an infra-red sensor. Stainless-steel braided, EPDM lined Inlet Hoses. Undefinable Air Gap – See IRN’s

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R008 R040

Expiry date:

31/08/2030

Product Images

Approval Holder:

Mediclinics S.A.

Company Name

Mediclinics S.A.

Address

Industria, 54 * E‐08025 BARCELONA (

Country

Spain

View All Listings by this Company

Range of side entry BS1212-4 (2016) delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2010120

Size:

1/2” BSP (M) & 3/8” BSP (M)

Marking:

FLUME on float. BS1212-4 on body.

Installation Requirements:

R001 R550

Expiry date:

31/10/2025

Model:

AB772 Side entry inlet valve with G1/2” plastic threaded connection AB772 Side entry inlet valve with G1/2” brass threaded connection. AB772 Side entry inlet valve with G3/8” plastic threaded connection.

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2306097

Size:

½” BSP (M)

Marking:

WRAS, Model name and MyLife on front panel. 6 Litre inside of cistern.

Installation Requirements:

R001 R556 R581

Expiry date:

30/06/2028

Model:

MLSOL825WHF

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2212119

Size:

½” BSP (M)

Marking:

WRAS, Model name and MyLife on front panel. 6 Litre inside of cistern.

Installation Requirements:

R001 R280 R556 R560 R571 R581

Expiry date:

31/12/2027

Model:

MLSOL1000WHF (500mm) with frame MLSOL1135WHF (500mm) with frame MLSOLIWC (500mm) without frame

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Section:

1660 Shower Outlets

Description:

A Shower hose(s)

EPDM lining With Stainless steel.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Notes & Further Information

Note: 1. 1st *** denotes the hose length: 15-300cm: E.g., 015 = 15cm, 100 = 100cm, 200 = 200cm. 2. 2nd ** denotes the hose size: 06=DN6, 07=DN7 3. 3rd **** denotes the connections, and can be replaced with any of the following: 01=F1/2 05=M15*1

Product Images

Approval Holder:

Guangzhou Kind Architecture Material Technology Co., Ltd.

Company Name

Guangzhou Kind Architecture Material Technology Co., Ltd.

Address

Unit 10 No 1 Dashadi West Huangpu District

Country

Guangzhou

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall mounted. Two-way diverter valve. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Section:

2052 Diverter

Description:

A Range of Diverter(s) incorporating manual control

Plastic body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Product Images

Approval Holder:

Ningbo Wanhai Cartridge Technology Co. Ltd.

Company Name

Ningbo Wanhai Cartridge Technology Co. Ltd.

Address

Xiachen Development Zone, Chunhu, Fenghua

Country

Zhejiang, China

View All Listings by this Company

Manufacturers:

Ningbo Wanhai Cartridge Technology Co

Non-verifiable double check valve assembly with DZR brass body, incorporating two spring loaded, resilient trim in-line check valve cartridges. Compression connection to be used with copper pipe BS EN1057 only. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C for 12.10102.035.CP5R-8511, Maximum operating temperature 65°C for 12.10112.035.CP5R-8511.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250904701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

35mm compression.

Marking:

V&G, CR, size, flow arrow & WRAS on body, Date of manufacture MM-YY on body. EN1254-2 & size on compression nut

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

12.10102.035.CP5R-8511 12.10112.035.CP5R-8511

Manufacturer:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator and a swivel nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0410 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet swivel spout with swivel nozzle.

WRAS Approval Number:

250912047

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

SUERDA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

SH20524 - Bramley Basin Mono Mixer chrome.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Kisdon range of single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The outlet of the pull-out spray incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

250814303

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP

Marking:

WIX on tap body

Installation Requirements:

R001 R090

Expiry date:

31/08/2030

Model:

170099 311142 313077 313078 313079 313087

Product Images

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) with a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The pull-out spray hose connector incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

250912010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R009 R090

Expiry date:

30/09/2030

Model:

63852-00X, 63855-00X. X denotes finish and can be replaced with: 01 - Chrome, 04 - Brushed Nickel, 4408 - Brushed Brass, 6801 - Matt Black.

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted. Capable of achieving AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

30/09/2030

Notes & Further Information

XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel) The products were already tested according to the TCS. The report from SKZ is attached.

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating a ceramic disc headwork with various type operating members. The spout outlet incorporates a plastic aerator. Product is supplied with click type pop-up waste – not verified by test. Maximum working pressure 6 Bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP F

Marking:

Waterworks on spout outlet.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

HKM4ZZX CLS4ZZX HLS4ZZX Suffix Options: Where ZZ represents handle components 0 - Less Handles 1 - Cross Handle 2 - Two‐Tone Cross Handle 3 - Coin Edge Cross Handle 10 - Solo Series Lever Handle 11 - Lever Handle 12 - Two‐Tone Lever Handle 13 - Coin Edge Lever Handle 14 - Walnut Lever Handle 15 - Leather Lever Handle 20 - Solo Series Straight Lever Handle 2A - Tandem Series Guilloche Lines Lever Handle 2B - Tandem Series Two‐Tone Lever Handle 2C - Union Series Guilloche Link Lever Handle 2D - Union Series Enamel Guilloche Lines Lever Handle 2E - Union Series Guilloche Pinstripe Lever Handle 2P - Solo Series Two‐Piece Straight Lever Handle 2S - Bond Rally Series Lever Handle 2T - Teak Lever Handle 30 - Solo Series Knob Handle 3S - Bond Rally Series Knob Handle 4A - Tandem Series Guilloche Lines Knob Handle 4B - Tandem Series Two‐Tone Guilloche Knob Handle 4D - Union Series Enamel Guilloche Lines Knob Handle 5C - Union Series Guilloche Link Knob Handle 7A - Tandem Series Guiloche Lines Lever handles with Gland Cover 7B - Tandem Series Two Tone Lever handles with Gland Cover 7C - Union Series Guiloche Link Lever handles with Gland Cover 7D - Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E - Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P - Solo Series Two Piece Straight Lever handle with Gland Cover 7S - Bond Rally Series Lever Handle With Gland Cover 7T - Tandem Series Teak lever with Gland Cover 8Z - Straight Lever Handle 90 - Solo Series Straight Lever handles with Gland Cover

Where X represents External Colour or Finish Options AC - Antique Copper AB - Architectural Bronze AQB - Antique Brass BZ - Architectural Bronze C - Polished Chrome CO - Concordia DN - Dark Nickel G - Gold L - Lumin M - Matte Nickel MC - Matte Chrome MG - Matte Gold MS - Matte Silver N - Polished Nickel S - Silver SC - Shiny Copper SO - Sovereign UB - Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies ( brass bodies - various finishes), incorporating either a ceramic cartridge or ceramic disc (see models) headworks with either a single lever or cross top (see models) operating member. The spout outlet incorporates either a plastic aerator, a plastic flow straightener or an open outlet type spout (see models). Some models are supplied with a click type waste and some are supplied with a lever type pop-up waste (see models). Maximum working pressure 5.0 Bar . Maximum operating temperature 65.0°C or 85.0°C (see models)

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310417

Size:

Stainless Steel braided EPDM lined flexible hoses incorporating 1/2” BSP captive nut end connections. Stainless steel braided EPDM or (PEX) lined flexible hose assemblies incorporating 1/2" captive nut end connections for models ( 174538, 179638, 179608F, 179608F GF, 179108 & 172908 )

Marking:

ebb+flo on body, except for 285451 Caldew - TP on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2028

Model:

5.0 Bar, 65°C Models: 30794 Pentle Cloakroom Basin Mixer 33830 Kilve Basin Mixer 295451 Caldew Mini Basin Mixer. AA972 Pentle Cloakroom Basin Mixer Matt Black 5.0 Bar, 85°C Models: AA969 Cobo Cloakroom Basin Mixer 95737 Cobo Basin Mixer

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. The product is supplied with a click type waste, verified by test. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

63886-70X, 63887-70X, 63888-70X. X denotes finish and can be replaced with: 01 - Chrome, 04 - Brushed Nickel, 4408 - Brushed Brass, 6801 - Matt Black.

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 Tap Gap .

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted. PEX lined flexible inlet hose assemblies with grey polymeric braiding. Capable of achieving AUK 3

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Ningbo Jinsheng Testing & Technology Co., Ltd

Company Name

Ningbo Jinsheng Testing & Technology Co., Ltd

Address

East area No.29th Yuanfeng Road Fenghua District

Postcode

315500

Country

China

General Email

alisa.zhang@jstest.cn

View All Listings by this Company

Manufacturers:

Zhejiang Gaoao Sanitary Ware Co., Ltd

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2311923

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

ebb+flo on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

17294 & 61716

Product Images

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of single hole, single outlet, swivel, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Model BLS4ZZX is supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP female adapters.

Marking:

WATERWORKS on escutcheon.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

BKM4ZZX BLS4ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc or ceramic cartridge headworks and single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hoses incorporating 1/2" BSP (F) captive nut end connections.

Marking:

ST JAMES logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

5004 Range (2 Different colour finish) 5004BF 5004CM 5005 Range (5 Different colour finish) 5005B 5005BB 5005BC 5005BF 5005CM 5006 Range (5 Different colour finish) 5006B 5006BB 5006BC 5006BF 5006CM 5007 Range (5 Different colour finish) 5007B 5007BB 5007BC 5007BF 5007CM 580381 Instantor Pro Variants 580077 BF = Brushed Chrome Finish, CM = Chrome Finish, B = Brushed Black Finish, BB = Brushed Brass Finish, BC = Brushed Red Gold Finish.

Approval Holder:

Sanbra Fyffe

Company Name

Sanbra Fyffe

Address

Santry Avenue, Santry, Dublin, D09 K160

Country

Ireland

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250912011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

63853-00X, 63854-00X. X denotes finish and can be replaced with: 01 - Chrome, 04 - Brushed Nickel, 4408 - Brushed Brass, 6801 - Matt Black.

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Single hole, double outlet (swivel) combination tap assembly (chrome plated brass body). Incorporating a ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250902036

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hoses with 1/2" BSP captive nut connections

Marking:

ST JAMES logo on body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2030

Model:

580314

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

Two hole, single outlet (fixed) combination tap assemblies (brass body, chrome finish), incorporating quarter turn ceramic disc headworks and single lever operating members. The products are supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310415

Size:

¾” BSP (M)

Marking:

ebb+flo on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

59441

Product Images

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310184

Size:

3/4” BSP (M)

Marking:

ebb+flo on leg

Installation Requirements:

R001 R005 R010

Expiry date:

31/10/2028

Model:

27475

Product Images

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via thermostatic cartridge with single lever operating member. The inlets incorporate a stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) x ¾” BSP (M) offset unions.

Marking:

Stern medical on tap body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

314720: Thermix 1000T.

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of two hole, single outlet fixed combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork and a lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.

Marking:

Fantini logo on Spout.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

53xxR504W Additional Information 01 = Gold plus 02 = Chrome 13 = Matt black 29 = Matt white 38 = Polished Stainless Steel 93= Brushed Stainless Steel 95 = Nickel PVD P5 = Matt Gun metal P6 = Matt British Gold P9 = Matt copper S1 = Deep Black Q7 = Pure Brass Q8 = Raw Metal 00 = No Finish

Manufacturer:

Fratelli Fantini Spa

Company Name

Fratelli Fantini Spa

Address

Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK2 tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

QIANPAI VILLAGE, CHUMEN TOWN, YUHUAN CITY, ZHEJIANG PROVINCE, 317600

Country

China

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Undefinable air gap, R040 applies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Product Images

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

QIANPAI VILLAGE, CHUMEN TOWN, YUHUAN CITY, ZHEJIANG PROVINCE, 317600

Country

China

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted. Capable of achieving AUK3 Tap Gap.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

Yuhuan AMG Just Valve Co., Ltd

Section:

0520 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck or Wall Mounted Capable of achieving AUK3 Tap gap when deck mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Notes & Further Information

1)No Suffix-Chrome 2)-**Represents the following different surface treatments: 1.H-Black 2.DYB - Matte white 3.BZ - Perl white painted 4.HGTS - Red bronze 5.HTL = Yellow bronze brushed 6.Q = Bronze 7.QTSL = Bronze brushed bright 8.QTS = Bronze brushed matte 9.STS = Acid copper brushed 10.SDMGJ = Water plated rose gold 11.N = Nickel brushed bright light 12.NP = Nickel brushed 13.TJ = Titanium gold 14.TJLS = Titanium gold brushed 15.G = Gold 16.GJS = Gold brushed 17.GJSY = Zirconium gold wire drawing matte 18.PGJFY = Zirconium gold wire drawing matte bright light 19.PLSJ = Brushed gold 20.LSJY = Brushed gold matte 21.MGJ = Rose gold 22.MGJL = Rose gold brushed 23.DMGJ = Light rose gold brushed 24.HTS = Red bronze brushed 25.QHP = Grey 26.LSQH = Grey brushed 27.LHMGJ = Brushed yellow rose gold

Product Images

Approval Holder:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

XUDOU VILLAGE, QINGGANG, YUHUAN ZHEJIANG

Country

china

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2310416

Size:

¾” BSP (M)

Marking:

ebb+flo on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2028

Model:

41318

Product Images

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck mounted

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Product Images

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

QIANPAI VILLAGE, CHUMEN TOWN, YUHUAN CITY, ZHEJIANG PROVINCE, 317600

Country

China

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0550 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a swivel spout.

Deck mounted. Capable of achieving an AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Various finish： (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

0570 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a double outlet and a swivel spout.

Deck mounted Capable of achieving AUK 3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/10/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of three-hole, single outlet, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up or lever type waste – not verified by test. Maximum working pressure. 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on escutcheon or end of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS2ZZX BLS6ZZX CLS2ZZX HLS2ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear or on edge of spout outlet.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

CLS1ZZX HLS1ZZX BLS5XXZ Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear of body and on adhesive label on rear of body or WATERWORKS on edge of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS1ZZX 8 Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Three hole tap(s) with a single outlet and a fixed spout.

Deck mounted Capable of achieving AUK3 Tap gap Stainless steel braided PEX lined Inlet Hose Stainless steel braided PEX lined connection Hose

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Product Images

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Concealed. Undefinable Air Gap – See IRN’s.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Notes & Further Information

*denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Product Images

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Free standing, upright floor mounted inlet legs (chromium plated brass), incorporating stainless-steel braided PEX lined flexible hose assemblies. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

250912014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

G½” (F) x G¾” (F).

Marking:

SUERDA on body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

SD7002-4 - Bramley Floor Mounted Bath Legs - Pair - Chrome.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Range of free-standing sanitary macerating disposal units. The units are fed via a flexible hose assembly. Flow is controlled by a solenoid valve and discharges via a type `AB` air gap (verified by test, suitable of fluid category 5 backflow protection). Maximum working pressure 6.0 Bar Maximum operating temperature 40.0°C

Section:

0950 Disposal Units

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC hose with 3/4" BSP captive nut end connections.

Marking:

DDC and Pulpmatic flex on front of unit body

Installation Requirements:

R001 R574

Expiry date:

30/09/2030

Model:

FLX000-50HZ 240V - Pulpmatic Flex Macerator FLX000-60HZ 110V - Pulpmatic Flex Macerator UL

Manufacturer:

DDC Dolphin Ltd.

Company Name

DDC Dolphin Ltd.

Address

The Fulcrum, Vantage Way, Poole

Postcode

BH12 4NU

Country

Dorset,

Phone

+44 (0)1202 724858

View All Listings by this Company

F1C compression & F5 press fittings for use with B1 multilayer PEX/AL/PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250406702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12mm, 16mm, 20mm, 25mm, 26mm & 32mm.

Marking:

Fittings: Rifeng, Size, crimp profile (U), date of manufacture (yyyy/mm), on crimp sleeve. Pipes: Rifeng, PEXb/AL/PEXb, pressure, size, date of manufacture & batch no.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

B1 multilayer PEX/AL/PEX pipe, F1C compression fittings & F5 press fittings. Pipe: Multilayer PEX/AL/PEX Pipes B1-0912 Multilayer PEX/AL/PEX Pipes B1-1216 Multilayer PEX/AL/PEX Pipes B1-1620 Multilayer PEX/AL/PEX Pipes B1-2025 Multilayer PEX/AL/PEX Pipes B1-2026 Multilayer PEX/AL/PEX Pipes B1-2632 F5 Equal straight union: F5-S0912*0912 F5-S1216*1216 F5-S1620*1620 F5-S2025*2025 F5-S2026*2026 F5-S2632*2632 F5 Reducer: F5-S1216*0912 F5-S1620*0912 F5-S1620*1216 F5-S2025*0912 F5-S2025*1216 F5-S2025*1620 F5-S2026*0912 F5-S2026*1216 F5-S2026*1620 F5-S2632*0912 F5-S2632*1216 F5-S2632*1620 F5-S2632*2025 F5-S2632*2026 F5 Male straight union: F5-S0912*1/2 F5-S0912*3/4 F5-S1216*3/8 F5-S1216*1/4 F5-S1216*1/2 F5-S1216*3/4 F5-S1216*1 F5-S1620*3/8 F5-S1620*1/2 F5-S1620*3/4 F5-S1620*1 F5-S2025*1/2 F5-S2025*3/4 F5-S2025*1 F5-S2026*1/2 F5-S2026*3/4 F5-S2026*1 F5-S2632*1/2 F5-S2632*3/4 F5-S2632*1 F5-S2632*1 1/4 F5-S2632*1 1/2 F5 Female straight union: F5-S0912*1/2F F5-S0912*3/4F F5-S1216*3/8F F5-S1216*1/4F F5-S1216*1/2F F5-S1216*3/4F F5-S1216*1F F5-S1620*3/8F F5-S1620*1/2F F5-S1620*3/4F F5-S1620*1F F5-S2025*1/2F F5-S2025*3/4F F5-S2025*1F F5-S2026*1/2F F5-S2026*3/4F F5-S2026*1F F5-S2632*1/2F F5-S2632*3/4F F5-S2632*1F F5-S2632*1 1/4F F5-S2632*1 1/2F F5 Equal elbow: F5-L0912*0912 F5-L1216*1216 F5-L1620*1620 F5-L2025*2025 F5-L2026*2026 F5-L2632*2632 F5 Equal elbow (45°): F5-L0912*0912 (45°) F5-L1216*1216 (45°) F5-L1620*1620 (45°) F5-L2025*2025 (45°) F5-L2026*2026 (45°) F5-L2632*2632(45°) F5 Unequal elbow: F5-L1216*0912 F5-L1620*0912 F5-L1620*1216 F5-L2025*0912 F5-L2025*1216 F5-L2025*1620 F5-L2026*0912 F5-L2026*1216 F5-L2026*1620 F5-L2632*0912 F5-L2632*1216 F5-L2632*1620 F5-L2632*2025 F5-L2632*2026 F5 Male elbow: F5-L0912*1/2 F5-L0912*3/4 F5-L1216*3/8 F5-L1216*1/4 F5-L1216*1/2 F5-L1216*3/4 F5-L1216*1 F5-L1620*3/8 F5-L1620*1/2 F5-L1620*3/4 F5-L1620*1 F5-L2025*1/2 F5-L2025*3/4 F5-L2025*1 F5-L2026*1/2 F5-L2026*3/4 F5-L2026*1 F5-L2632*1/2 F5-L2632*3/4 F5-L2632*1 F5-L2632*1 1/4 F5-L2632*1 1/2 F5 Female elbow: F5-L0912*1/2F F5-L0912*3/4F F5-L1216*3/8F F5-L1216*1/4F F5-L1216*1/2F F5-L1216*3/4F F5-L1216*1F F5-L1620*3/8F F5-L1620*1/2F F5-L1620*3/4F F5-L1620*1F F5-L2025*1/2F F5-L2025*3/4F F5-L2025*1F F5-L2026*1/2F F5-L2026*3/4F F5-L2026*1F F5-L2632*1/2F F5-L2632*3/4F F5-L2632*1F F5-L2632*1 1/4F F5-L2632*1 1/2F F5 Equal tee: F5-T0912*0912*0912 F5-T1216*1216*1216 F5-T1620*1620*1620 F5-T2025*2025*2025 F5-T2026*2026*2026 F5-T2632*2632*2632 F5 Unequal tee: F5-T1216*1620*1216 F5-T1620*1216*1216 F5-T1620*1620*1216 F5-T1620*2025*1620 F5-T2025*1216*1216 F5-T2025*1216*1620 F5-T2025*1216*2025 F5-T2025*1620*1216 F5-T2025*1620*1620 F5-T2025*1620*2025 F5-T2025*2025*1216 F5-T2025*2025*1620 F5-T2025*2632*2025 F5-T2632*1216*2632 F5-T2632*1620*2632 F5-T2632*2025*2025 F5-T2632*2025*2632 F5-T0912*1216*0912 F5-T2632*2026*2632 F5-T1620*1216*1620 F5-T1216*2025*1216 F5 Male tee: F5-T0912*1/2*0912 F5-T0912*3/4*0912 F5-T1216*3/8*1216 F5-T1216*1/4*1216 F5-T1216*1/2*1216 F5-T1216*3/4*1216 F5-T1216*1*1216 F5-T1620*3/8*1620 F5-T1620*1/2*1620 F5-T1620*3/4*1620 F5-T1620*1*1620 F5-T2025*1/2*2025 F5-T2025*3/4*2025 F5-T2025*1*2025 F5-T2026*1/2*2026 F5-T2026*3/4*2026 F5-T2026*1*2026 F5-T2632*1/2*2632 F5-T2632*3/4*2632 F5-T2632*1*2632 F5-T2632*1 1/4*2632 F5-T2632*1 1/2*2632 F5 Female tee: F5-T0912*1/2F*0912 F5-T0912*3/4F*0912 F5-T1216*3/8F*1216 F5-T1216*1/4F*1216 F5-T1216*1/2F*1216 F5-T1216*3/4F*1216 F5-T1216*1F*1216 F5-T1620*3/8F*1620 F5-T1620*1/2F*1620 F5-T1620*3/4F*1620 F5-T1620*1F*1620 F5-T2025*1/2F*2025 F5-T2025*3/4F*2025 F5-T2025*1F*2025 F5-T2026*1/2F*2026 F5-T2026*3/4F*2026 F5-T2026*1F*2026 F5-T2632*1/2F*2632 F5-T2632*3/4F*2632 F5-T2632*1F*2632 F5-T2632*1 1/4F*2632 F5-T2632*1 1/2F*2632 F5 Demountable female straight union: F5-S0912*1/2F(H) F5-S0912*3/4F(H) F5-S1216*3/8F(H) F5-S1216*1/4F(H) F5-S1216*1/2F(H) F5-S1216*3/4F(H) F5-S1216*1F(H) F5-S1620*3/8F(H) F5-S1620*1/2F(H) F5-S1620*3/4F(H) F5-S1620*1F(H) F5-S2025*1/2F(H) F5-S2025*3/4F(H) F5-S2025*1F(H) F5-S2026*1/2F(H) F5-S2026*3/4F(H) F5-S2026*1F(H) F5-S2632*1/2F(H) F5-S2632*3/4F(H) F5-S2632*1F(H) F5-S2632*1 1/4F(H) F5-S2632*1 1/2F(H) F5 End cap: F5-D0912 F5-D1216 F5-D1620 F5-D2025 F5-D2026 F5-D2632 F1C End cap: F1-D0912 F1-D1216 F1-D1620 F1-D2025 F1-D2026 F1-D2632 F5 Connector core: F5-C1216x1/2 F5-C1620x1/2 F5-C1216x3/4 F5-C1620x3/4 F5-C2025x3/4 F5 Wall plated female elbow: F5-L1216x1/2F (Z) F5-L1620x1/2F (Z) F5-L1620x3/4F (Z) F5-L1216x1/2F (Z4) F5-L1620x1/2F (Z4) F5-L1620x3/4F (Z4) F1 MLCP to Copper Adaptor: F1-S1216x15Cu C (MUL) F1-S1620x15Cu C (MUL) F1-S1620x22Cu C (MUL) F1-S2025x22Cu C (MUL) F1-S2025x28Cu C (MUL) F1-S2632x28Cu C (MUL) F1-S1216x15Cu2 C F1-S1620x15Cu2 C F1-S2025x28Cu2 C F1-S2632x28Cu2 C F5 MLCP to Copper Adaptor: F5-S1216x15Cu (MUL) F5-S1620x15Cu (MUL) F5-S1620x22Cu (MUL) F5-S2025x22Cu (MUL) F5-S2025x28Cu (MUL) F5-S2632x28Cu (MUL) F5-S1216x15Cu (150) F5-S1620x22Cu (150) F5-S1216x15Cu2 F5-S1620x22Cu2 F5-S2025x22Cu2 F5-S2632x28Cu2 Radiator elbow copper adapter: F5-L1216xφ15S Assembly Double Fittings: F5-L1216xφ15S (Z1) (GZ1) Copper Radiator Tee: F5-T1216xφ15Sx1216

Product Images

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Range of DZR brass compression fittings for use with Q-Therm PEX-b Pipes (SDR 7.4) Maximum working pressure:20 bar, cold water use only

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm and 20mm

Marking:

Q-THERM, UAE, DZR and SIZE on compression nut. Pipe: “Q-THERM, 16mm х 2.2mm PE-Xb PN20 DIN 16892/93 ISO 15875 7NO 95° WRAS APPROVED MATERIAL HH: MM DD/MM/YYYY Made in UAE(RAK)

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

PX00PS2000Y: Q-Therm PEX-b Pipe, DN 16mm, SDR 7.4, PN20, 16mm x 2.2mm PX00PS2001Y: Q-Therm PEX-b Pipe DN 20mm, SDR 7.4, PN20, 20mm x 2.8mm PXYCBE0001R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCBE0101R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 20mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0001R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0101R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 20mm x ½” BSP (M (DZR Brass Compression Fitting) PXYCMA0001R Q-Therm DZR Brass Male PE-X Adaptor 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCMA0101R Q-Therm DZR Brass Male PE-X Adaptor 20mm x ½” BSP (M) (DZR Brass Compression Fitting)

Manufacturer:

Quantum Industries LLC

Company Name

Quantum Industries LLC

Address

Al Ghail Industrial Park, Ras Al Khaimah, PB 86488

Country

UAE

View All Listings by this Company

‘LSMRI’ range of copper-nickel press fittings (‘M’ type crimp profile) for use with copper-nickel ‘LSMRI’ pipe. Above ground use only. Maximum working pressures: Press fittings: 16.0 bar, LSMRI-PN6 Series flange: 6.0 bar, LSMRI-PN10/16 Series flange: 10/16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 108mm.

Marking:

Fittings: LSMRI, product name, size, CuNi10Fe1.6Mn, PN16, PN6 or PN10/16 on body. Pipe: LSMRI, Size, CuNi10Fe1.6Mn.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

LSMRI-Pipe-15, LSMRI-Pipe-22, LSMRI-Pipe-28, LSMRI-Pipe-35, LSMRI-Pipe-42, LSMRI-Pipe-54, LSMRI-Pipe-76.1, LSMRI-Pipe-88.9, LSMRI-Pipe-108, LSMRI-90°A Elbow-15, LSMRI-90°A Elbow-22, LSMRI-90°A Elbow-28, LSMRI-90°A Elbow-35, LSMRI-90°A Elbow-42, LSMRI-90°A Elbow-54, LSMRI-90°A Elbow-76.1, LSMRI-90°A Elbow-88.9, LSMRI-90°A Elbow-108, LSMRI-90°B Elbow-15, LSMRI-90°B Elbow-22, LSMRI-90°B Elbow-28, LSMRI-90°B Elbow-35, LSMRI-90°B Elbow-42, LSMRI-90°B Elbow-54, LSMRI-90°B Elbow-76.1, LSMRI-90°B Elbow-88.9, LSMRI-90°B Elbow-108, LSMRI-60°A Elbow-15, LSMRI-60°A Elbow-22, LSMRI-60°A Elbow-28, LSMRI-60°A Elbow-35, LSMRI-60°A Elbow-42, LSMRI-60°A Elbow-54, LSMRI-60°A Elbow-76.1, LSMRI-60°A Elbow-88.9, LSMRI-60°A Elbow-108, LSMRI-60°B Elbow-15, LSMRI-60°B Elbow-22, LSMRI-60°B Elbow-28, LSMRI-60°B Elbow-35, LSMRI-60°B Elbow-42, LSMRI-60°B Elbow-54, LSMRI-60°B Elbow-76.1, LSMRI-60°B Elbow-88.9, LSMRI-60°B Elbow-108, LSMRI-45°A Elbow-15, LSMRI-45°A Elbow-22, LSMRI-45°A Elbow-28, LSMRI-45°A Elbow-35, LSMRI-45°A Elbow-42, LSMRI-45°A Elbow-54, LSMRI-45°A Elbow-76.1, LSMRI-45°A Elbow-88.9, LSMRI-45°A Elbow-108, LSMRI-45°B Elbow-15, LSMRI-45°B Elbow-22, LSMRI-45°B Elbow-28, LSMRI-45°B Elbow-35, LSMRI-45°B Elbow-42, LSMRI-45°B Elbow-54, LSMRI-45°B Elbow-76.1, LSMRI-45°B Elbow-88.9, LSMRI-45°B Elbow-108, LSMRI-30°A Elbow-15, LSMRI-30°A Elbow-22, LSMRI-30°A Elbow-28, LSMRI-30°A Elbow-35, LSMRI-30°A Elbow-42, LSMRI-30°A Elbow-54, LSMRI-30°A Elbow-76.1, LSMRI-30°A Elbow-88.9, LSMRI-30°A Elbow-108, LSMRI-30°B Elbow-15, LSMRI-30°B Elbow-22, LSMRI-30°B Elbow-28, LSMRI-30°B Elbow-35, LSMRI-30°B Elbow-42, LSMRI-30°B Elbow-54, LSMRI-30°B Elbow-76.1, LSMRI-30°B Elbow-88.9, LSMRI-30°B Elbow-108, LSMRI-15°A Elbow-15, LSMRI-15°A Elbow-22, LSMRI-15°A Elbow-28, LSMRI-15°A Elbow-35, LSMRI-15°A Elbow-42, LSMRI-15°A Elbow-54, LSMRI-15°A Elbow-76.1, LSMRI-15°A Elbow-88.9, LSMRI-15°A Elbow-108, LSMRI-15°B Elbow-15, LSMRI-15°B Elbow-22, LSMRI-15°B Elbow-28, LSMRI-15°B Elbow-35, LSMRI-15°B Elbow-42, LSMRI-15°B Elbow-54, LSMRI-15°B Elbow-76.1, LSMRI-15°B Elbow-88.9, LSMRI-15°B Elbow-108, LSMRI-Equal Tee-15, LSMRI-Equal Tee-18, LSMRI-Equal Tee-22, LSMRI-Equal Tee-28, LSMRI-Equal Tee-35, LSMRI-Equal Tee-42, LSMRI-Equal Tee-54, LSMRI-Equal Tee-76.1, LSMRI-Equal Tee-88.9, LSMRI-Equal Tee-108, LSMRI-Reduce Tee-22X15, LSMRI-Reduce Tee-28X15, LSMRI-Reduce Tee-28X22, LSMRI-Reduce Tee-35X15, LSMRI-Reduce Tee-35X22, LSMRI-Reduce Tee-35X28, LSMRI-Reduce Tee-42X22, LSMRI-Reduce Tee-42X28, LSMRI-Reduce Tee-42X35, LSMRI-Reduce Tee-54X22, LSMRI-Reduce Tee-54X28, LSMRI-Reduce Tee-54X35, LSMRI-Reduce Tee-54X42, LSMRI-Reduce Tee-76.1X22, LSMRI-Reduce Tee-76.1X28, LSMRI-Reduce Tee-76.1X35, LSMRI-Reduce Tee-76.1X42, LSMRI-Reduce Tee-76.1X54, LSMRI-Reduce Tee-88.9X22, LSMRI-Reduce Tee-88.9X28, LSMRI-Reduce Tee-88.9X35, LSMRI-Reduce Tee-88.9X42, LSMRI-Reduce Tee-88.9X54, LSMRI-Reduce Tee-88.9X76.1, LSMRI-Reduce Tee-108X22, LSMRI-Reduce Tee-108X28, LSMRI-Reduce Tee-108X35, LSMRI-Reduce Tee-108X42, LSMRI-Reduce Tee-108X54, LSMRI-Reduce Tee-108X76.1, LSMRI-Reduce Tee-108X88.9, LSMRI-Reducer-22X15, LSMRI-Reducer-28X15, LSMRI-Reducer-28X18, LSMRI-Reducer-28X22, LSMRI-Reducer-35X22, LSMRI-Reducer-35X28, LSMRI-Reducer-42X28, LSMRI-Reducer-42X35, LSMRI-Reducer-54X28, LSMRI-Reducer-54X35, LSMRI-Reducer-54X42, LSMRI-Reducer-76.1X42, LSMRI-Reducer-76.1X54, LSMRI-Reducer-88.9X22, LSMRI-Reducer-88.9X54, LSMRI-Reducer-88.9X76.1, LSMRI-Reducer-108X22, LSMRI-Reducer-108X54, LSMRI-Reducer-108X76.1, LSMRI-Reducer-108X88.9, LSMRI-Sleeve-15, LSMRI-Sleeve-22, LSMRI-Sleeve-28, LSMRI-Sleeve-35, LSMRI-Sleeve-42, LSMRI-Sleeve-54, LSMRI-Sleeve-76.1, LSMRI-Sleeve-88.9, LSMRI-Sleeve-108, LSMRI-Slip Sleeve-15, LSMRI-Slip Sleeve-22, LSMRI-Slip Sleeve-28, LSMRI-Slip Sleeve-35, LSMRI-Slip Sleeve-42, LSMRI-Slip Sleeve-54, LSMRI-Slip Sleeve-76.1, LSMRI-Slip Sleeve-88.9, LSMRI-Slip Sleeve-108, LSMRI-Sleeve with 1 thread female end-15XR1/2", LSMRI-Sleeve with 1 thread female end-22XR3/4", LSMRI-Sleeve with 1 thread female end-28XR1", LSMRI-Sleeve with 1 thread female end-35XR1 1/4", LSMRI-Sleeve with 1 thread female end-42XR1 1/2", LSMRI-Sleeve with 1 thread female end-54XR2", LSMRI-Sleeve with 1 thread female end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread female end-88.9XR3", LSMRI-Sleeve with 1 thread female end-108XR4", LSMRI-Sleeve with 1 thread male end-15XR1/2", LSMRI-Sleeve with 1 thread male end-22XR3/4", LSMRI-Sleeve with 1 thread male end-28XR1", LSMRI-Sleeve with 1 thread male end-35XR1 1/4", LSMRI-Sleeve with 1 thread male end-42XR1 1/2", LSMRI-Sleeve with 1 thread male end-54XR2", LSMRI-Sleeve with 1 thread male end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread male end-88.9XR3", LSMRI-Sleeve with 1 thread male end-108XR4", LSMRI-PN6 FLANGED SLEEVE-15, LSMRI-PN6 FLANGED SLEEVE-22, LSMRI-PN6 FLANGED SLEEVE-28, LSMRI-PN6 FLANGED SLEEVE-35, LSMRI-PN6 FLANGED SLEEVE-42, LSMRI-PN6 FLANGED SLEEVE-54, LSMRI-PN6 FLANGED SLEEVE-76.1, LSMRI-PN6 FLANGED SLEEVE-88.9, LSMRI-PN6 FLANGED SLEEVE-108, LSMRI-PN10/16 FLANGED SLEEVE-15, LSMRI-PN10/16 FLANGED SLEEVE-28, LSMRI-PN10/16 FLANGED SLEEVE-35, LSMRI-PN10/16 FLANGED SLEEVE-42, LSMRI-PN10/16 FLANGED SLEEVE-54, LSMRI-PN10/16 FLANGED SLEEVE-76.1, LSMRI-PN10/16 FLANGED SLEEVE-88.9, LSMRI-PN10/16 FLANGED SLEEVE-108, LSMRI-PN6 Inner pieces for flanges-15, LSMRI-PN6 Inner pieces for flanges-22, LSMRI-PN6 Inner pieces for flanges-28, LSMRI-PN6 Inner pieces for flanges-35, LSMRI-PN6 Inner pieces for flanges-42, LSMRI-PN6 Inner pieces for flanges-54, LSMRI-PN6 Inner pieces for flanges-76.1, LSMRI-PN6 Inner pieces for flanges-88.9, LSMRI-PN6 Inner pieces for flanges-108, LSMRI-PN10/16 Inner pieces for flanges-15, LSMRI-PN10/16 Inner pieces for flanges-22, LSMRI-PN10/16 Inner pieces for flanges-28, LSMRI-PN10/16 Inner pieces for flanges-35, LSMRI-PN10/16 Inner pieces for flanges-42, LSMRI-PN10/16 Inner pieces for flanges-54, LSMRI-PN10/16 Inner pieces for flanges-76.1, LSMRI-PN10/16 Inner pieces for flanges-88.9, LSMRI-PN10/16 Inner pieces for flanges-108, LSMRI-Penetration With Sleeve-15, LSMRI-Penetration With Sleeve-22, LSMRI-Penetration With Sleeve-28, LSMRI-Penetration With Sleeve-35, LSMRI-Penetration With Sleeve-42, LSMRI-Penetration With Sleeve-54, LSMRI-Penetration With Sleeve-76.1, LSMRI-Penetration With Sleeve-88.9, LSMRI-Penetration With Sleeve-108, LSMRI-Tee with 1 female thread end-15XR1/2", LSMRI-Tee with 1 female thread end-22XR1/2", LSMRI-Tee with 1 female thread end-28XR1/2", LSMRI-Tee with 1 female thread end-35XR1/2", LSMRI-Tee with 1 female thread end-42XR1/2", LSMRI-Tee with 1 female thread end-54XR1/2", LSMRI-Tee with 1 female thread end-22XR3/4", LSMRI-Tee with 1 female thread end-28XR3/4", LSMRI-Tee with 1 female thread end-35XR3/4", LSMRI-Tee with 1 female thread end-42XR3/4", LSMRI-Tee with 1 female thread end-54XR3/4", LSMRI-Tee with 1 female thread end-76.1XR3/4", LSMRI-Tee with 1 female thread end-88.9XR3/4", LSMRI-Tee with 1 female thread end-108XR3/4", LSMRI-Tee with 1 female thread end-28XR1", LSMRI-Tee with 1 female thread end-35XR1 1/4", LSMRI-Tee with 1 female thread end-42XR1 1/2", LSMRI-Tee with 1 female thread end-54XR2", LSMRI-Tee with 1 female thread end-108XR2", LSMRI-Female thread end connector with union-15XR1/2", LSMRI-Female thread end connector with union-22XR3/4", LSMRI-Female thread end connector with union-28XR1", LSMRI-Female thread end connector with union-35XR1 1/4", LSMRI-Female thread end connector with union-42XR1 1/2", LSMRI-Female thread end connector with union-54XR2", LSMRI-Male thread end connector with union-15XR1/2", LSMRI-Male thread end connector with union-22XR3/4", LSMRI-Male thread end connector with union-28XR1", LSMRI-Male thread end connector with union-35XR1 1/4", LSMRI-Male thread end connector with union-42XR1 1/2", LSMRI-Male thread end connector with union-54XR2".

Product Images

Approval Holder:

Luoyang Ship Material Research Institute

Company Name

Luoyang Ship Material Research Institute

Address

No.169,South Binhe Road, Luolong District, Luoyang City, Henan Province

Country

China

View All Listings by this Company

Range of compression fittings with brass, nickel plated brass bodies for use with copper pipe (manufactured to EN 1057). For above ground use only. Max working pressure 16.0 bar. Max operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm. ¼” - 1¼” BSP (M) or (F). Added June 2025: Additional 8 - 35mm sizes (see model). 42mm - 54mm. 1½” - 2” BSP (M) or (F).

Marking:

MT(Brand name) , Size, WRAS and EN 1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Equal Straight: 6601012 - 12×12 6601015 - 15×15 6601018 - 18×18 6601022 - 22×22 6601028 - 28×28 6601035 - 35×35 6601042 - 42x42 6601054 - 54x54 6701008 8×8 6701010 - 10×10 6701012 - 12×12 6701014 - 14×14 6701015 - 15×15 6701016 - 16×16 6701018 - 18×18 6701022 - 22×22 6701028 - 28×28 6701035 - 35×35 6701042 - 42x42 6701054 - 54x54 Reducing Straight: 660101815 - 18×15 660102215 - 22×15 660102218 - 22×18 660102822 - 28×22 670101008 - 10×8 670101210 - 12×10 670101508 - 15×8 670101510- 15×10 670101512 - 15×12 670101815 - 18×15 670102215 - 22×15 670102822 - 28×22 Female Straight 660201215 - 12×1/2" F 660201510 - 15×3/8" F 660201515 - 15×1/2" F 660201520 - 15×3/4" F 660201525 - 15×1" F 660201815 - 18×1/2" F 660201820 - 18×3/4" F 660202215 - 22×1/2" F 660202220 - 22×3/4" F 660202215 - 22×1" F 660202820 - 28×3/4" F 660202825 - 28×1" F 670200810 - 8×3/8" F 670201010 - 10×3/8" F 670201015 - 10×1/2" F 670201210 - 12×3/8" F 670201215 - 12×1/2" F 670201415 - 14×1/2" F 670201510 - 15×3/8" F 670201515 - 15×1/2" F 670201520 - 15×3/4" F 670201525 - 15×1" F 670201615 - 16×1/2"F 670201620 - 16×3/4" F 670201815 - 18×1/2" F 670201820 - 18×3/4" F 670202215 - 22×1/2" F 670202220 - 22×3/4" F 670202225 - 22×1" F 670202820 - 28×3/4" F 670202825 - 28×1" F 670203532 - 35×1 1/4"F 670204240 - 42×1 1/2" F 670205450 - 54×2" F Male Straight: 670301510 - 15×3/8"M 670301515 - 15×1/2"M 670301520- 15×3/4"M 670301815 - 18×1/2"M 670301820 - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302225- 22×1"M 660302820 - 28×3/4"M 660302825 - 28×1"M 670300806F - 8×1/8"M 670301210F - 12×3/8"M 670301215F - 12×1/2"M 670301410F - 14×3/8"M 670301415F - 14×1/2"M 670301515 - 15×1/2"M 670301520F - 15×3/4"M 670301615F - 16×1/2"M 670301815F - 18×1/2"M 670301820F - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302820F - 28×3/4"M 670302825 - 28×1"M 670303532F - 35×1 1/4"M 670304240F - 42×1 1/2"M Equal Elbow: 6604015 - 15×15 6604018 - 18×18 6604022 - 22×22 6604028 - 28×28 6604035 - 35×35 6604042 - 42×1 1/2"M 6604054 - 54 x 54 6704008 - 8×8 6704010 - 10×10 6704012 - 12×12 6704014 - 14×14 6704015 - 15×15 6704016 - 16×16 6704018 - 18×18 6704022 - 22×22 6704028 - 28×28 6704035 - 35×35 6704042 - 42x42 6704054 - 54x54 Female Elbow: 670501215 - 12×1/2"F 670501515 - 15×1/2"F 670501520 - 15×3/4"F 670501815 - 18×1/2"F 670501820 - 18×3/4"F 670502215 - 22×1/2"F 670502220 - 22×3/4"F 670582225 - 22×1"F 670502825 - 28×1"F 660501515 - 15×1/2"F 660501520 - 15×3/4"F 660501815 - 18×1/2"F 660501820 - 18×3/4"F 660502215- 22×1/2"F 660502220 - 22×3/4"F 660502225 - 22×1"F 660502825 - 28×1"F Male Elbow: 660601515 - 15×1/2"M 660601520 - 15×3/4"M 660601815 - 18×1/2"M 660601820 - 18×3/4"M 660602215 - 22×1/2"M 660602220 - 22×3/4"M 660602225 - 22×1"M 660602825 - 28×1"M 670601215 - 12×1/2"M 670601415- 14×1/2"M 670601515 - 15×1/2"M 670601520 - 15×3/4"M 670601615 - 16×1/2"M 670601815 - 18×1/2"M 670601820 - 18×3/4"M 670602215 - 22×1/2"M 670602220 - 22×3/4"M 670602225 - 22×1"M 670602825 - 28×1"M Equal Tee: 6608015 - 15×15×15 6608018 - 18×18×18 6608022 - 22×22×22 6608028 - 28×28×28 6608035- 35×35×35 6608042 - 42×42×42 6608054 - 54×54×54 6708010 - 10×10×10 6708012 - 12×12×12 6708014 - 14×14×14 6708015 - 15×15×15 6708016 - 16×16×16 6708018 - 18×18×18 6708022 - 22×22×22 6708028 - 28×28×28 6708035 - 35×35×35 Reducing Tee: 66090152215 - 15×15×22 66090181518 - 18×18×15 66090181815 - 18×15×18 66090221515 - 22×15×15 66090222215- 22×15×22 66090221522 - 22×22×15 66090221822 - 22×22×18 66090282815 - 28×15×28 66090282222 - 28×22×22 66090282822 - 28×22×28 67090152215 -15×15×22 67090181518 - 18×18×15 67090181815 - 18×15×18 67090221515 - 22×15×15 67090222215 - 22×15×22 67090221522 - 22×22×15 67090282815 - 28×15×28 67090282222 - 28×22×22 67090282822 - 28×22×28 Female Tee: 66100151515 - 15×1/2“F 66100181518 - 18×1/2“F 66100182018 - 18×3/4“F 66100221522 - 22×1/2”F 66100222022 - 22×3/4”F 66100282028 - 28×3/4”F 66100282528- 28×1”F 67100151515- 15×1/2“F 67100181518 - 18×1/2“F 67100182018 - 18×3/4“F 67100221522 - 22×1/2”F 67100222022 - 22×3/4”F Wall Plate Elbow: 661101515 - 15×1/2"F 661101815 - 18×1/2"F 661101820 - 18×3/4"F 661102215 - 22×1/2"F 661102220 - 22×3/4"F 671101515 - 15×1/2"F 671102215 - 22×1/2"F 671102220 - 22×3/4"F Stop End: 6607015 - 15 6607018 - 18 6607022 - 22 670708 - 8 6707010 - 10 6707012 - 12 6707015 - 15 6707018 - 18 6707022 - 22 6707028 - 28 Bent Tap Connector: 671301515 - 15×1/2"F 671302220 - 22×3/4"F Crossover Bridge: 6612015 - 15×15 6612018 - 18×18 6612022 - 22×22 6712015 - 15×15 6712022 - 22×22 Where for all models: No suffix = brass body, NP suffix = nickel plated brass,

Product Images

Approval Holder:

Business Key, S.L.

Company Name

Business Key, S.L.

Address

Poligono Industrial Camps d’En Ricart Carrer Comerç, 10 naves 4-9 08780 Pallejà (Barcelona)

Country

Spain

View All Listings by this Company

‘HLBRxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The HLBRTC‐1 tank connector, HLBRSS‐1 and HLBRBS‐1 tap connectors all incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 8-54mm, ¼” - 2” BSP (M) or (F).

Marking:

HL and size on nut or body. DZR brass fittings are also marked CR.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

HLBRRC‐1 Reducing Coupling 10mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 10mm, HLBRRC‐1 Reducing Coupling 15mm x 12mm, HLBRRC‐1 Reducing Coupling 22mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 22mm, HLBRSS‐1 Straight Swivel Tap Connector 15mm x 1/2", HLBRSS‐1 Straight Swivel Tap Connector 15mm x 3/4", HLBRSS‐1 Straight Swivel Tap Connector 22mm x 3/4", HLBRBS‐1 Bent Swivel Tap Connector 15mm x 1/2", HLBRBS‐1 Bent Swivel Tap Connector 22mm x 3/4", HLBRTC‐1 Tank Connector 15mm, HLBRTC‐1 Tank Connector 22mm, HLBRTC‐1 Tank Connector 28mm, HLBRTC‐1 Tank Connector 35mm, HLBRER‐1 Elbow Reducer 22mm x 15mm, HLBRFB‐1 Female Backplate Elbow 15mm x 1/2" female, HLBRFB‐1 Female Backplate Elbow 22mm x 3/4" female, HLBRCN‐1 Compression Nut 15mm, HLBRCN‐1 Compression Nut 22mm, HLBRCN‐1 Compression Nut 28mm, HLBRCC‐1 Compression Cap / Blank Nut 1/2", HLBRCB‐1 Compression Blank Capnut 22mm, HLBRRT‐1 Reducing Tee 15mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 15mm, HLBRRT‐1 Reducing Tee 28mm x 15mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 22mm, HLBRFB‐2 Female Branch Tee 15mm x 15mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 3/4", HLBRFB‐2 Female Branch Tee 28mm x 28mm x 1/2", HLBRFE‐2 Female End Tee 15mm x 1/2" x 15mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 8mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 10mm, HLBRRS‐1 Reducing Set (3 part) 22mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 22mm, HLBRRS‐1 Reducing Set (3 part) 35mm x 22mm, HLBRTA‐1 Tap Adaptor Male x Female 1/2", HLBRBR‐1 Burst Repair Coupling 15mm x 15mm x 80mm, HLBRSC‐1 Straight Coupling 8mm, HLBRSC‐1 Straight Coupling 10mm, HLBRSC‐1 Straight Coupling 15mm, HLBRSC‐1 Straight Coupling 22mm, HLBRSC‐1 Straight Coupling 28mm, HLBRSC‐1 Straight Coupling 35mm, HLBRSC‐1 Straight Coupling 42mm, HLBRSC‐1 Straight Coupling 54mm, HLBRMC‐1 Male Coupling 8mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/2" male, HLBRMC‐1 Male Coupling 10mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/4" male, HLBRMC‐1 Male Coupling 15mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/2" male, HLBRMC‐1 Male Coupling 15mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1/2" male, HLBRMC‐1 Male Coupling 22mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1.1/4" male, HLBRMC‐1 Male Coupling 35mm x 1.1/4" male, HLBRMC‐1 Male Coupling 42mm x 1. 1/2" male, HLBRMC‐1 Male Coupling 54mm x 2" male, HLBRFC‐1 Female Coupling 8mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 3/8" female, HLBRFC‐1 Female Coupling 10mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 3/8" female, HLBRFC‐1 Female Coupling 15mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1/2" female, HLBRFC‐1 Female Coupling 22mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1" female, HLBRFC‐1 Female Coupling 28mm x 1" female , HLBRFC‐1 Female Coupling 35mm x 1.1/4" female, HLBRFC‐1 Female Coupling 42mm x 1.1/2" female, HLBRFC‐1 Female Coupling 54mm x 2" female, HLBRSE‐1 Stop End 8mm, HLBRSE‐1 Stop End 10mm, HLBRSE‐1 Stop End 15mm, HLBRSE‐1 Stop End 22mm, HLBRSE‐1 Stop End 28mm, HLBRSE‐1 Stop End 35mm, HLBRSE‐1 Stop End 42mm, HLBRSE‐1 Stop End 54mm, HLBRIR‐1 Internal Reducer 15mm x 8mm, HLBRIR‐1 Internal Reducer 10mm x 8mm, HLBRIR‐1 Internal Reducer 15mm x 10mm, HLBRIR‐1 Internal Reducer 22mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 22mm, HLBRE‐1 Elbow 8mm, HLBRE‐1 Elbow 10mm, HLBRE‐1 Elbow 15mm, HLBRE‐1 Elbow 22mm, HLBRE‐1 Elbow 28mm, HLBRE‐1 Elbow 35mm, HLBRE‐1 Elbow 42mm, HLBRME‐1 Male Elbow 15mm x 1/2" male, HLBRME‐1 Male Elbow 15mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 1" male, HLBRME‐1 Male Elbow 28mm x 1" male, HLBRFE‐1 Female Elbow 15mm x 1/2" female, HLBRFE‐1 Female Elbow 15mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 1" female, HLBRFE‐1 Female Elbow 28mm x 1" female, HLBRET‐1 Equal Tee 8mm, HLBRET‐1 Equal Tee 10mm, HLBRET‐1 Equal Tee 15mm, HLBRET‐1 Equal Tee 22mm, HLBRET‐1 Equal Tee 28mm, HLBRET‐1 Equal Tee 35mm, HLBRET‐1 Equal Tee 42mm, HLBRET‐1 Equal Tee 54mm.

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

‘3600xx’ range of brass compression fittings for use with copper pipe (manufactured to EN 1057). The 360014 tank connector, 360013 and 360017 tap connectors all incorporate an EPDM washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 6-54mm, ¼” - 2” BSP (M) or (F).

Marking:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on compression nut.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

360003 Compression Straight Connector: 6mm - 54mm, 360004 Compression Reducing Coupler: 10mmx8mm - 28mmx22mm, 360001 Compression Male Coupler: 6mmx1/4" - 54mmx2", 360002 Compression Female Coupler: 6mmx1/4" - 54mmx2", 360013 Compression Straight Tap Connector: 15mmx1/2"- 22mmx3/4", 360014 Compression Tank Connector with Seal: 15mm - 54mm 360015 Compression End Cap Connector: 6mm - 54mm, 360007 Compression Elbow Coupler: 8mm - 54mm, 360016 Compression Elbow Reducing Connector: 22mmx15mm, 360017 Compression Bent Tap Connector: 15mmx1/2"- 22mmx3/4", 360006 Compression Female Elbow Connector: 8mmx1/4" - 54mmx2", 360009 Compression Wall Plate Elbow Coupler: 15mmx1/2" - 22mmx3/4", 360005 Compression Male Elbow Coupler: 8mmx1/4" - 54mmx2", 360008 Compression Equal Tee Coupler: 8mm - 54mm, 360018 Compression Reducing Tee Coupler: 15mmx15mmx22mm - 28mmx28mmx22mm, 360010 Compression Female Tee Coupler: 15mmx15mmx1/2" - 28mmx28mmx1/2".

Product Images

Approval Holder:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

Manufacturer:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

South Coast Sales logo on body. EN 1254 and Size on compression Nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Product Images

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

‘CFxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250915003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech and size on compression nut or body (CF19 and CF20 models only). CR on body of DZR brass fittings.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

CF01 STRAIGHT COUPLINGS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF01L Repair Coupling: 15mm*15mm*82mm, 22mm*22mm*82mm. CF02 ELBOWS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF03 REDUCING COUPLING: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 16mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm, 35mm*22mm, 35mm*28mm. CF04 REDUCING ELBOWS: 10mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 18mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm. CF05 STRAIGHT CONN BSP FI: 8mm*1/4" BSP (F), 8mm*3/8" BSP (F), 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*1/4" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*1/4" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 15mm*1" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*3/4" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF06 ELBOWS BSP FI: 8mm*1/4" BSP (F) , 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF07 STRAIGHT CONN BSP MI: 8mm*1/8" BSP (M), 8mm*1/4" BSP (M), 8mm*3/8" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 18mm*1/2" BSP (M), 18mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 22mm*1 1/4" BSP (M), 28mm*3/4" BSP (M), 28mm*1" BSP (M), 28mm*1 1/4" BSP (M), 35mm*1 1/4" BSP (M), 35mm*1 1/2" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF08 ELBOWS BSP MI: 8mm*1/4" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF10 WALL PLATE ELBOW: 15mm*1/2" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF11 EQUAL TEE: 8mm*8mm*8mm, 10mm*10mm*10mm, 12mm*12mm*12mm, 15mm*15mm*15mm, 22mm*22mm*22mm, 28mm*28mm*28mm, 35mm*35mm*35mm, 42mm*42mm*42mm, 54mm*54mm*54mm. CF12 REDUCING TEE: 15mm*15mm*22mm, 22mm*15mm*15mm, 22mm*15mm*22mm, 22mm*22mm*15mm, 22mm*22mm*18mm, 28mm*22mm*15mm, 28mm*15mm*15mm, 28mm*28mm*15mm, 28mm*15mm*28mm, 28mm*22mm*22mm, 22mm*22mm*28mm, 28mm*28mm*22mm, 28mm*22mm*28mm, 35mm*35mm*15mm, 35mm*35mm*22mm, 35mm*35mm*28mm, 42mm*42mm*15mm, 42mm*42mm*22mm, 42mm*42mm*28mm, 42mm*42mm*35mm, 54mm*54mm*15mm, 54mm*54mm*22mm, 54mm*54mm*28mm, 54mm*54mm*35mm, 54mm*54mm*42mm. CF13 BSP (F)TEE CXCXFI: 10mm*10mm*3/8" BSP (F), 12mm*12mm*3/8" BSP (F), 12mm*12mm*1/2" BSP (F), 15mm*15mm*1/4" BSP (F), 15mm*15mm*1/2" BSP (F), 18mm*18mm*3/4" BSP (F), 22mm*22mm*1/2" BSP (F), 22mm*22mm*3/4" BSP (F), 28mm*28mm*1/2" BSP (F), 28mm*28mm*3/4" BSP (F), 28mm*28mm*1" BSP (F). CF14 STOP ENDS: 8mm, 10mm, 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF15 STRAIGHT TAP CON: 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*3/4" BSP (F). CF16 BENT TAP CONN: 15mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF17 TANK CONNECTORS: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF19 Reducing Set: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm, 35mm*15mm, 35mm*22mm, 35mm*28mm, 42mm*15mm, 42mm*22mm, 42mm*28mm, 42mm*35mm, 54mm*15mm, 54mm*22mm, 54mm*28mm, 54mm*35mm, 54mm*42mm. CF20 RED SET ONE PT: 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm. CF22 Water Tank Connector: 15mm*1/2" BSP (M), 22mm*3/4" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF23 45 degree elbow: 15mm*15mm, 22mm*22mm, 28mm*28mm. CF24 CROSS: 15mm*15mm*15mm*15mm, 22mm*22mm*22mm*22mm.

Product Images

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 6‐25, 6‐26, New Oriental Time Building, 1130 Baizhang Road, Ningbo, Zhejiang

Country

China

View All Listings by this Company