| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61407 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61107 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 51507AQ | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61477 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61177 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
Range of stainless steel braided, EPDM lined flexible hose assemblies with DZR brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel or stainless steel with nylon, EPDM lined flexible hose assemblies with DZR brass end connections. Models 128-3009 CST & YU-JQAL222A are stainless steel wire, all other models are stainless steel with black nylon outer. Some models incorporate spherical valves, see models. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum operating pressure 10.0 bar. Maximum operating temperature 90°C.
Range of “Tempest” Indirect and direct unvented storage cylinders consisting of factory fitted single or twin coil circuit with either a primary or solar coil. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar@90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures: Secondary circuit 3.0 bar, Primary Circuit 5.5 bar & Solar circuit 5.5 bar. Maximum operating temperature 70°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E2001 | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 bar | 85 °C | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Not Applicable | |
| E2001P | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 bar | 85 °C | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Not Applicable | |
| E2005 | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 bar | 85 °C | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Not Applicable | |
| E2005P | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 bar | 85 °C | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Not Applicable |
Range of wall mounted bar type thermostatic shower mixing valve with chromium plated brass body incorporating a non-rising spindle headwork with a dome operating member controlling the flow. The temperature is independently controlled via a thermostatic cartridge incorporating a manual over ride button with a dome type operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 Bar, Maximum operating temperature 60 °C
Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of wafer or lugged (see models) butterfly valves incorporating blue epoxy coated ductile iron bodies and discs, with Maximum working pressure: 16 Bar. Maximum operating temperature: 100 °C.
Range of wall mounted concealed flow control valves (brass body with various finishes) incorporating, quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C.
Range of wafer non-return valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Range of latching solenoid valves with DZR brass bodies, EPDM diaphragms and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Latching solenoid valve with a black plastic body and an EPDM diaphragm. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 16.0 bar (model HC-60982-15) Maximum working pressure 25.0 bar (model HC-62022-15) Maximum operating temperature 85°C.
Range of spherical valves incorporating bronze bodies, chromium plated brass ball, PTFE seat and lever operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM coated wedge and EPDM O - rings. Maximum working pressure – 10.0 bar (DN900 and DN1000 only) and 16.0 bar (DN350 – DN800). Maximum operating temperature - 85°C
Range of screw down stop valves incorporating brass bodies. The valves are to be used with copper pipe (manufactured to EN1057). Maximum working pressure 16 Bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass or DZR brass bodies. Valves incorporate EPDM seat washers and PTFE seals. Maximum working pressure: 16 bar. Maximum operating temperature: 95°C
Electrolytic scale inhibitors incorporating nickel plated copper bodies. For use with copper pipe manufactured to BS EN 1057. Maximum working pressure 10.0 bar. Cold water use only.
'MC90'. Natural (appears white), injection moulded POM material. For use with water up to 85°C.
‘Nelfapox FW Inert Cream'. Factory applied, cream coloured, two-component epoxy coating. Mix base and curing agent in a 6.8:2 volume ratio. Apply one or two coats as per manufacturer's Technical Data Sheet '999', revision date '24-03-2026'. Cure Coat 1 for 16 hours@20°C. Cure Coat 2 for 7 days@20°C. For use with water up to 60°C. These materials are only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'NextGen NP-F9500 PW'. Factory applied, blue coloured powder coating. Apply as per National Paints technical data sheet 'FBE/ REV01 09-07-2019'. Cure for 3 minutes@240°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ShaliPoxy 400 FG'. Factory applied, white coloured, two-component epoxy coating. Mix components A & B in a volume ratio of 3:1 and apply as per manufacturer’s TDS ‘0982019’. Cure for 7 days@27°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Lewatit S 8227 & S 8229'. 'Lewatit® S 8229 Plus X' was added to the approval in March 2026. White coloured ion exchange resins. For use with water up to 23°C.
'Revolve M-638, M-694 & M-695'. Black coloured Polyethylene materials manufactured using rotational moulding. For use with water up to 85°C.
‘E4028WCC, E4510WCC, E5076WCC, E5522WCC, E6020WCC, E6020, E6541WCC, E7091WCC, E7091, E7528WCC, E8027WCC, E8506WCC & E9011WCC ‘O’ rings’. Black coloured, compression moulded EPDM ‘O’ rings. Shore hardness between 40 & 90. Tested in-radius size between 0.5mm & 3.5mm. ‘E4028WCC Gaskets’. Black coloured, compression moulded EPDM gaskets. Shore hardness 40. Tested in-radius size 0.8mm. For use with water up to 85°C.
'FOWRY-190920'. Black coloured, compression moulded EPDM rubber. Shore hardness 75. Tested in-radius size 3.0mm. For use with water up to 85°C.
'E7015'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.19mm. For use with water up to 23°C.
'SQ-30T-W, SQ-40T-W, SQ-50T-W, SQ-60T-W, SQ-70T-W, SQ-80T-W, & SQ-90T-W (transparent, unpigmented)'. ‘SQ-30R-W, SQ-40R-W, SQ-50R-W, SQ-60R-W, SQ-70R-W, SQ-80R-W, & SQ-90R-W (red coloured)'. ‘SQ-30B-W, SQ-40B-W, SQ-50B-W, SQ-60B-W, SQ-70B-W, SQ-80B-W, & SQ-90B (blue coloured)'. Range of compression moulded, silicone rubber materials. Shore hardness between 30 & 90. Tested in-radius size 0.9mm. For use with water up to 85°C:
Range of smart Bidet assemblies with sensor actuated solenoid valves and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 Bar Maximum operating temperature Cold water use only
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SHAFPUR/CH | Chrome | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SHAFPUR/BN | Brushed Nickle | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SHAFPUR/AB | Antique brass | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SHAFPUR/GD | Gold | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| AVEPUR/CH | Chrome | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| AVEPUR/BN | Brushed Nickle | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| AVEPUR/AB | Antique brass | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 108-7010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, |
| 310-7010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 604587 X XXX | VARIOUS | 3/4” BSP male inlet. | 10 bar | 65 °C | TP | Back of the mixer tap body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | Shower Hose, Handset, |
X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Single lever type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1044-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1034-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1033-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1032-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1031-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
1.For the series 1044-XX, 1034-XX,1033-XX,1032-XX,1031-XX, the only difference is handle style. 2.XX represent different finishes and can be replaced by CR =Chrome, MB=Matte black, BB=Brushed brass, BN=Brushed nickel,GM=Gun Metal.
Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member that also incorporates a manual override button. The assembly incorporates a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3) The spout outlet incorporates a plastic flow straightener. The inlets incorporate approved check valve cartridge and stainless-steel strainers, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SHRABSMCH | Chromed | 15mm compression | 10 bar | 65 °C | Lecico | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | Aerator | |
| SHZABSMCH | Chromed | 15mm compression | 10 bar | 65 °C | Lecico | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | Aerator |
Range of Wall Mounted Shower Kits incorporating shower handset, wall mounted elbow and shower hose, some models include a Riser Rail - see models for details. Open outlet. Maximum operating temperature 60 °C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| XB-LY-011C | Chrome | ½" x ¾" BSP (M) offset union | 10 bar | 65 °C | XUSHENG | BODY | No | Single sequential | |||
| XB-LY-017C | Chrome | ½" x ¾" BSP (M) offset union | 10 bar | 65 °C | XUSHENG | BODY | No | Single sequential |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 108-5065 | Chrome plated | 3/4" BSP (F) x 1/2" offset unions | 10 bar | 65 °C | CEILSA | Tap body | No | Ceramic cartridge | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, Riser Rail, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F3063S-** | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | LAN BIAO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| F3064S-** | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | LAN BIAO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S002* | Various | 3/4" BSP (F) inlets and 1/2" BSP (F) outlets | 10 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, Fixed Head, |
| S013* | Various | 1/2" BSP (F) | 10 bar | 65 °C | WINSDRUM | On cover plate | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
| S014* | Various | 3/4" BSP (F) inlets and 1/2" BSP (F) outlets | 10 bar | 65 °C | WINSDRUM | On cover plate | No | 1/4 & 1/2 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, Fixed Head, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 71 282 xx0 | Various. | G 3/8 | 10 bar | 60 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | C-plate | Aerator | Click Type |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UBR0274 | Various | 1/2" BSP (F) | 5 bar | 65 °C | SONAS | Body | No | Ceramic cartridge | C-plate | Aerator | |
| UBR0275 | Various | 1/2" BSP (F) | 5 bar | 65 °C | SONAS | Body | No | Ceramic cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CKM8ZZX | Various | 3/8" BSP F | 6 bar | 65 °C | WW Logo | Spout outllet | No | Ceramic cartridge | C-plate | Aerator |
Where ZZ denotes the operating member type. It will always be 2 digits, which can be any combination of letters and, or numbers. As examples: 11 = Lever Handles, 3S = Solo Series Knob Handle Where X denotes the finish. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: G = Gold, AC = Antique Copper or AQB = Antique Brass AB = Architectural Bronze
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SAVOY | Chrome | G ½” | 5 bar | 60 °C | CARRON PHOENIX | OPERATING MEMBER | No | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| FUJI | Chrome | G ½” | 5 bar | 60 °C | FRANKE | OPERATING MEMBER | No | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 53109* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| CRS010* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| CRS011* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| CRS012* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | |
| WK1034* | Various | ½" captive nut | 5 bar | 65 °C | LUSSO | On body | No | Ceramic cartridge | Not Applicable | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DU SNK FL5.6 C | Chrome | 1/2" BSP | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | Aerator | Flow Regulator Fitted, |
Range of wall mounted, two hole, single outlet (fixed), combination tap assemblies (brass bodies – various finishes, see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UBR0278 | Various | 3/4" BSP (M) | 5 bar | 65 °C | SONAS | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| UBR0279 | Various | 3/4" BSP (M) | 5 bar | 65 °C | SONAS | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Page 88 of 89
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
