Range of in-line `Y` patterned strainers with bronze bodies and a stainless-steel mesh. Maximum working pressure 20.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of PVC shower hoses with a black PVC inner liner (with a black and silver striped appearance). Hose end connections and nuts are available in brass, plastic or stainless steel, (all chrome plated), with either EPDM (black) or silicone (white) washers. BS6920 65°C.
Range of plastic shower hoses (various finishes) incorporating PEX inner liner, with EPDM washers. Maximum working pressure; Open outlet Maximum operating temperature; 65°C
Non-metallic materials and components comply with BS6920 at 65°C
‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet
Non-metallic materials and components comply with BS6920 at 60°C
Air Source Hot Water Cylinder range of cased and insulated, unvented hot water storage cylinders (enamelled steel) of the package type incorporating heat pump module. The DHW circuit includes a factory fitted temperature & pressure relief valve (Caleffi) set at 7 bar and 95˚C . The safety kit incorporates a pressure reducing valve (Caleffi) set at 3.5 bar, strainer, check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2 and an expansion valve (Caleffi) set at 6 bar, expansion vessel (Reflex) and a tundish (Caleffi). The temperature of the hot water is controlled by a factory fitted manual control (set at 60˚C) and a high pressure switch positioned on the heat pump module (maximum temperature 65˚C) The cylinders are factory fitted with standard dual control immersion heater. Immersion heater incorporate control and manual resetting thermostats (maximum 89˚C). Maximum working pressure 5.5 Bar Maximum operating temperature 75°C. Maximum supply pressure to the pressure reducing valve is 12 bar. Maximum working pressure of the primary circuit 3.5 bar. Maximum operating temperature 80°C.
Range of automatic air vent valves with blue epoxy coated cast iron bodies and EPDM seats. Maximum working pressure 16.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted manual blending valve, (chrome plated brass body), incorporating a ceramic cartridge headwork with a single lever type operating member. Maximum working pressure 10 bar. Maximum operating temperature 65°C
Wall mounted thermostatic shower valve (brass body - various finishes and trim sets), incorporating a thermostatic cartridge controlling the flow and temperature with a single lever or cross top operating members with a manual override button. The inlets incorporate a stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, bar type thermostatic shower valves (brass body – various finishes), incorporating quarter turn ceramic disc headworks controlling the flow with single lever operating member that incorporates a manual override button. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. Each inlet and hand shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow, with single lever operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Models incorporate stainless-steel strainers, fibre gasket washers and single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection) on the inlets. Products are not supplied with shower hose or handset. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
T-type thermostatic mixing valve with a brass body. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless steel strainers. Maximum working pressure 10 bar. Maximum operating temperature 65°C
Thermostatic shower valve incorporating a detent headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. The inlets incorporate approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate that they provide backflow protection). Maximum working pressure 10 Bar. Maximum operating temperature 60 °C.
Range of wall mounted bar type thermostatic shower vavles, (brass bodies – various finishes) incorporating a ceramic disc diverter cartridge controlling the flow, with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. This product is supplied with a hose, handset and overhead shower. Maximum working pressure 5 bar. Maximum operating temperature 65°C
Range of wall mounted thermostatic, bar type shower valves. Models (801509 & 801510) incorporate quarter turn ceramic disc headworks and model (801508) incorporates a non-rising spindle headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge that incorporates a manual override button. Both using either dome, cubed or single lever type operating members. The inlets incorporate stainless steel strainer washers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 65°C
Range of wall mounted, thermostatic blending shower valves, incorporating a quarter turn ceramic disc headworks or ceramic disc diverter cartridges (see models) with a cube type operating members. The temperature is controlled independently via a thermostatic cartridge with a cube type operating members that incorporate manual override buttons. Model (1.1901.001) is supplied with a shower hose, hanset & riser rail assemblies. Model (1.1901.002) is supplied with a shower hose, handset, overhead shower & riser rail assebmlies. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 10 bar. Maximum operating temperature 45°C
Non-metallic materials and components comply with BS6920 at 45°C
Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with shower kits consisting of a shower hose, handset & a riser rail assembly. Maximum working pressure 5.0 Bar Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic blending valves or exposed bar type thermostatic blending valves (chromium plated brass) incorporating a 2-way manual diverter valve controlling and diverting the flow between an overhead shower and a shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button incorporate. An approved check valve cartridge is also supplied, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (NU‐035 & NU‐037 models. All other models 60°C only).
Range of butterfly valves with blue epoxy coated ductile iron bodies and discs, and EPDM seals with handwheel gear operating members. Maximum working pressure – 10 bar or 16 bar, see models. Maximum operating temperature – 23°C.
Range of lever operated butterfly valves with blue epoxy coated cast iron bodies, stainless steel discs and EPDM ‘O’ rings and seals. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted, concealed shower control valve with a brass body, incorporating a non-rising spindle headwork and EPDM O-rings. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 70°C
Wall mounted, shower control valve, (brass body – various finishes), incorporating a half turn ceramic disc headwork using a dome type operating member. The shower outlet connection incorporates an approved check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10 bar. Maximum operating temperature 70°C
Range of non-return valves housed within a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 80ºC.
‘Aquacheck’ range of spring-loaded resilient trim, non-return valves with blue epoxy coated ductile iron bodies, stainless steel springs and EPDM seals. Maximum working pressure 16 bar. Cold water use only.
ART 236 range of spring-loaded resilient trim, non-return valves with blue epoxy coated ductile iron bodies, stainless steel springs and EPDM seals. Maximum working pressure 16 bar. Cold water use only.
Range of non-return, swing gate valves with gunmetal bronze bodies. Maximum working pressure 20.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of pressure reducing valves with DZR brass bodies. Maximum inlet supply pressure 25.0 bar. Outlet supply pressure is adjustable within the range of 1.5 bar to 6.0 bar. Maximum operating temperature 70°C.
Inlet control group consisting of an in-line pressure reducing valve (adjustable pressure - see model) and a pre-set expansion relief valve (pre-set pressure - see model) housed in a DZR brass body with an EPDM rubber diaphragm. The product incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Compression connection to be used with copper pipe EN1057 only. Maximum supply pressure 10.0 bar. Maximum operating temperature 40°C.
Range of pilot operated, pressure reducing valves with blue epoxy coated ductile iron bodies, stainless steel filter, EPDM ‘O’-rings and diaphragm. The valve has an adjustable pressure reducing facility controlled via a pilot valve, with auxiliary components including stainless steel tubing and fittings, and stainless-steel spherical valves. Maximum inlet supply pressure 16.0 bar. Outlet pressure setting is adjustable in the range of 1.0 - 12.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of pre-set pressure relief valves (set at 3.0 bar) with nylon bodies, EPDM diaphragms and ‘O’-rings.
Non-metallic materials and components comply with BS6920 at 85°C
Range of solenoid valves with plastic bodies and silicone membrane. Maximum working pressure 8.0 Bar. Maximum operating temperature 65°C.
Non-metallic materials and components comply with BS6920 at 65°C
Range of stainless-steel spherical valves, incorporating a stainless-steel ball, PTFE seats and EPDM ‘O’-rings with single lever operating members. Maximum working pressure 63.0 Bar. Maximum operating temperature 23.0°C
“Ballofix®Lock” range of in-line hex key operated spherical valves with PTFE seals and EPDM ‘O’-rings. 3399300 & 3499300 models have a brass body. 3599300, 37199300 & 38199300 models have a DZR brass body. All models have a DZR brass ball (chromium plated). Maximum working pressures: 3399300, 3499300 and 3599300 models are 16.0 bar. 37199300 and 38199300 models are 25.0 bar. Maximum operating temperature 95°C.
‘3029’ range of lever operated spherical valves with chromium plated brass bodies and balls, incorporating PTFE seats and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.
Range of bronze spherical valves, incorporating chrome plated brass balls, PTFE seats and EPDM O-rings. Model (BW-Q01) incorporates a single lever operating member. Model (BW-Q01B) incorporates a butterfly type operating member. Maximum working pressure 16 bar. Maximum operating temperature 85°C
Range of press fit spherical valves with DZR brass bodies and balls with EPDM O-Rings. Joints are achieved by the use of a press fitting tool. For use with Multi-layered Pert/Al/Pert pipe compliant to EN21003-2 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of gate valves with blue epoxy coated cast iron bodies, incorporating cast iron wedges encapsulated in EPDM. Maximum working pressure - 16 Bar Maximum operating temperature – 23°C.
Double flanged, gate valve with blue epoxy coated ductile iron body and EPDM coated wedge and handwheel operating member. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 71°C
Range of gate valves with (blue epoxy coated) iron ductile bodies. The valves operate via a hand wheel operating member. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of gate valves with a non-rising spindle with a handwheel operating member. All models have brass body and brass wedge. For use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of gate valves with blue epoxy coated ductile iron bodies, non-rising spindles with handwheel operating member and a ductile iron wedge encapsulated in EPDM. Maximum working pressure 16.0 bar. Cold water use only.
Range of cast iron gate valves with blue epoxy coating, EPDM coated disc, PTFE gasket and EPDM seals. The valves are operated via a non-rising spindle headwork with a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of resilient seated gate valves with cast iron bodies (blue epoxy coated), EPDM coated cast iron wedges and a handwheel operating member. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of handwheel operated gate valves with brass bodies, gate & PTFE seals, for use with copper tube manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of brass and DZR brass stopcock incorporating EPDM and PTFE washers. Compression connections, to be used with copper pipe EN1057 only. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of unvented monobloc groups consisting of an in-line pressure reducing valve (PRV) (adjustable between 2.7 and 3.3 bar or 3.2 and 3.8 bar - see model) and a pre-set expansion relief valve (SRV) (pre-set at either 4.5, 4.75, 5.0, 6.0 or 8.0 bar - see model) housed in a DZR brass body with an EPDM rubber diaphragm. The product incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The expansion relief valve is fitted with a rotary type easing gear and the products are for use with copper pipe (manufactured to EN1057). Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 85°C.
Range of water conditioners with brass and stainless steel bodies, PTFE seals and sacrificial zinc anode. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.use only.
'ZX-9 Zhenxin Epoxy Powder Coating'. Factory applied, blue coloured epoxy coating. Apply as per manufacturer's 'Preparation and Curing Conditions' instructions reference 'ZX-9-1', dated '2024/02/26'. Cure for 30 minutes@180°C. For use with water up to 85°C. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'SYM-218'. Factory applied, grey coloured, two-part epoxy coating. Mix parts A & B in a 4.3:1 ratio and apply as per manufacturer's TDS 'XYJSMS001' dated '2023-01-10'. Cure for 168 hours@23°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
KARUMEL EX4413-F103. Factory applied, fusion bonded, epoxy powder coating available in blue or red. Apply and cure in accordance with 'Application Guide KARUMEL EX4413-F103', issue 'KCSA-230201', dated February 2023, (curing as per Section 3.6). For use with water up to 85°C.
'SGPAM-CN-WB01'. Factory applied, blue coloured water based coating. Apply as per manufacturer's TDS 'PAMPIPE-TDC-WA04', version '4', dated '16/11/2022'. Cure for 30 minutes@50°C. For use with water up to 23°C. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Page 75 of 177
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
